FCC ID: WUQ-MIB3VBT Headunit with radio and Bluetooth

MIB3 Octavia-BT only USER MANUAL 22.08.2022 Continental CONTENT GENERAL INSTRUCTIONS ...3 TECHNICAL INFORMATION .......4-5 INTRODUCTION TO OPERATION ..........6 PRIVACY SETTINGS INFORMATION........7 MANAGE FAVOURITES............8 RADIO OVERVIEW............9 BLUETOOTH - SEARCHING FOR MOBILE PHONES ..10 BLUETOOTH - CREATING A CONNECTION ..11 BLUETOOTH - DEAUTHORIZE A MOBILE TELEPHONE 12 BLUETOOTH - INTERACTING WITH MOBILE PHONE ...13 SMART LINK .....14 VEHICLE INFORMATION..15 MEDIA - RADIO, USB, BT AND SMARTLINK ......16 DRIVER ASSISTANCE .....17 SOUND ADUJSTMENTS..18 SYSTEM SETTINGS ......19 LEGAL INFORMATION ...20 REGULATORY INFORMATION CE MARKET.21 REGULATORY INFORMATION FCC / ISED.22-24 Continental 2 GENERAL INSTRUCTIONS Warning!

The MIB3 can distract your attention from the traffic conditions. You could cause an accident and place yourself and others in danger.

- Always devote your complete attention to the traffic situation.

- Only operate the MIB3 when traffic and driving conditions are appropriate.

- Set the volume to a level that allows you to hear important sounds outside the vehicle e.g. horns, sirens and alarms.

- High volumes can cause hearing damage.

- Always route the connection cable of the external device such that is does not restrict you when driving. Caution

- In some countries, some Infotainment functions can no longer be selected when the vehicle is running faster than a certain speed. This is not a malfunction, but complies with the national legal regulations. The MIB3 includes protective circuits that prevent damage to the device as far as possible:

- If the supply voltage is too low or too high, or if the MIB3 becomes too hot, the MIB3 will switch off automatically.

- Never open the MIB3 yourself in the event of a fault!

Take the faulty device to be repaired by a competent specialist repairer. We recommend that you use a service center for this work as this will ensure that trained workshop staff and the necessary parts and tools will be available. Continental 3 TECHNICAL INFORMATION The product MIB3 is developed and produced by Panasonic Automotive Systems Europe GmbH. The product is an integrated car entertainment systems. The MIB3 Entry series can support (depending on purchased configuration) several sources like MP3, USB (external connection box), Bluetooth, AM/FM radio, android auto, Apple CarPlay and MirrorLink. Power supply voltage: Nominal: DC +12 [V]

Temperature range: -40 to +80 [degree C]

RF technical specification Bluetooth 4.2 Frequency range:

Maximum conducted RF Output Power:

Antenna gain:

Modulation:

2402 MHz 2480 MHz 4 dBm or 2.5 mW

-6.6 dBi to +1.3 dBi FHSS Continental 4 INTRODUCTION TO OPERATION Long press on left control dial allows to switch the device on and off. Turning left control dial allows to change settings like volume. The MIB3 allows access to different menus with the function keys located around the display or the icons directly on the touch screen . Right control dial allows to browse through menus e.g. Settings and select options by pressing. Sliding over the touch screen left and right shows different pages. Pages within MIB3 are indicated by small dots at the bottom of the display (see green arrow). Within menus the return icon allows to return to previous page. Continental 5 PRIVACY SETTTINGS INFORMATION

-- No available in Octavia --

The MIB3 allows to adjust the privacy settings. The user can choose, which information will be provided to connected services. 1. Touch and hold a finger at the position of the green arrow. Moving the finger down will open a second menu. 2. Select Essential data only to adjust the level of privacy. For more information press the info icon (see green arrow). 3. Select the appropriate privacy level:

Essential data only: Services are deactivated. Only legally required services use data. Personal data: Services use only vehicle data and user data. Use my position: Services use position data, vehicle data and user data. Share my position: Primary and secondary users can also retrieve position data via the Skoda Connect portal or the app. Continental 6 MANAGE FAVOURITES The MIB3 allows to create shortcuts (favourites) for user friendly control of the device. 1. Touch and hold at the position of the green arrow and move down. This will open a second menu. 2. Long press on one of the Empty icon

. 3. Choose one of the features or select another page by sliding left or right. 4. To remove an already set favourite, long touch the icon and press the bin icon (green arrow). Continental 7 RADIO - OVERVIEW Press the left control dial to switch the radio on. 1. The AM/FM/DAB Radio can be started by pressing the function key AUDIO or the touch screen by toching the icon Audio. 2. The main Media screen of MIB3_EI HU, shows a favorite list. Currently played radio channel or media source can be added by pressing a + icon. Also, from this screen, already added favorites can be deleted. 3. By touching the !Radio icon, this allows to choose between different sources like AM, FM and DAB bands. 4. By touching any of the available bands, this shows available channels within such band. Automatic scanning of channels can be done by touching the update icon. 5. Manual channel scanning can be done by touching the scan icon. Continental 8 BLUETOOTH - SEARCHING FOR MOBILE PHONES The MIB3 will search for devices that support Bluetooths Hands Free Profile (HFP) and Audio Streaming Profile (A2DP/AVRCP). 1. Activate Bluetooth on your mobile phone. If necessary make the mobile phone visible to other devices. 2. On the display press Telephone (note: the follwoing steps can only be done with ignition turned on). 3. Press Select mobile phone to select available devices. 4. If the mobile phone has not been connected to the MIB3 before, it will be shown under !Available Devices. 5. Select the mobile phone from the list of available devices e.g. the sample mobile iPhone. Continental 9 BLUETOOTH CREATING A CONNECTION Each mobile phone needs to be paired by exchanging a password. The pairing process can be started either from MIB3 or the mobile phone, if the car device does not show the mobile phone. 1. On the MIB3 screen select one of the available mobile phones to connect. 2. Confirm the pairing process. A passkey is exchanged. Confirmation needs to be done on MIB3 and the mobile phone. Allow data transfer on the mobile phone 3. Confirm the next screen with OK. 4. The chosen mobile phone appears under Known devices e.g. iPhone. Continental 10 BLUETOOTH DEAUTHORIZE A MOBILE PHONE Deauthorization can be conducted in the menu Telephone. 1. Enter the menu Telephone or press function key Phone. 2. Select on the connected device on the screen. 3. Press the icon

. 4. Press on the icon bin next to the device which should be deauthorized. Continental 11 BLUETOOTH INTERACTING WITH A MOBILE PHONE After successfully connecting to a mobile phone several new options will be available. 1. Select the function key Phone or the icon Telephoneon the touch screen to receive more options. 2. The Telephone screen will show the name of the connected phone on the top. Pressing the + icon allows to add contacts directly from the address book. 3. The icon Dial number allows to make phone, Emergency, and Breakdown calls. 4. The icon Contacts opens the address book of the mobile phone. 5. The icon Calls shows incoming and outgoing calls. The icon Settings allows to change the mobile phone, individualize the user profile, and change Mobile phone reminder and simultaneous call settings. Continental 12 SmartLink Android Auto & MirrorLink 1. Select the menu SmartLink. 2. Connect the mobile phone with the USB cable. 3. Select one of two options: Android Auto or MirrorLink. Confirm the pairing (exchange of key) on the MIB3 and the mobile phone. Allow data transfer on the mobile phone. Please note that the mobile phone needs to have the relevant apps installed. 4. Different Android Auto features can be found at the bottom of the screen:

1. Navigation / Maps 2. Communication / phone calls 3. Home screen 4. Music and audio 5. Return to MIB3 applications. The MIB3 will use GPS signal and media data from the mobile phone. 5. To disconnect the mobile phone use the disconnect icon . Continental 13 VEHICLE INFORMATION Vehicle information can be displayed by the MIB3. 1. On the default menu screen, select the Vehicle icon or press the CAR function key. 2. Several menus can be accessed by selecting the icon !Vehicle stat. 3. Driving data can be accessed by touching such icon. 4. All other vehicle settings can be accessed by selecting the Settings icon. Continental 14 MEDIA RADIO, USB, BT AND SMARTLINK In this menu, several audio media sources can be selected for playing. 1. On the default menu screen, select the Audio icon or press the Audio function key. 2. By touching !Media, different media sources can be selected such as USB1 or USB2, Bluetooth audio or Smart link. 3. By selecting USB1, USB2 or BT audio sources, a media files list opens with the common media playing and browsing functionalities. 4. A media player can be shown by swipping from right edge to left. 5. All other media settings can be accessed by touching the

!Settings icon and selecting !Media Settings. Continental 15 Driver Assistance

-- this function is currently unavailable In this menu, driver assistance functions can be accessed and adjusted such as cruise control, lane assist, driver alert system, etc.. 1. On the default menu screen, select the Driver assist. icon to access driver assistance functionalities. 2. In the Driver assist. screen, graphical representations for many driver assistance functions are presented and allow the user to switch the functions on and off. 3. A complete list of driver assistance functions can be accessed and adjusted by selecting the settings icon . Continental 16 SOUND ADJUSTMENT MIB3 provides several options to individualize the sound in the car. 1. Select the icon Sound to view more options. 2. The Equalizer menu allows basic adjustments to the sound. 3. The Sound focus allows to control the focus point within the car. 4. The icon Volume provides options to individualize the volume of other systems and functions. 5. The icon Settings allows to enable or disable touchscreen and menu button tone. Continental 17 SYSTEM SETTINGS MIB3 system settings allow making a various amount of changes. 1. Select the icon Settings on the touch screen. 2. The following options are available:

No. Name 1 Screen 2 Time and date 3 Language 4 Additional keypad languages 5 Units 6 Manage apps 7 Connect via Bluetooth 8 Factory settinsgs 9 System information 10 Updates 11 Copyrights 12 Configuration wizard Description Screen off (in seconds), brightness and other functions Time and date Allows to change the current language Individual adding of characters Changing units Activating data transfer to Apps and managing Apps Switch on/off Bluetooth, control visibility of BT and BT-name Resetting the device complete or by individual functions Displaying hardware and software information Software updates for the head unit Thirt party copyright information Guided tour to set needed functions of MIB3 3. Using the icon leads to the previous page. Continental 18 LEGAL INFORMATION The MIB3 system allows to obtain fast legal information about the system. 1. On second page of the default menu screen (swipe left) then select the Legal Icon. 2. The Legal screen shows brief legal information and additional QR codes. With your mobile phone QR camera application, scan one the QR codes to visit the Skoda-Connect web pages for further legal information (, ). Continental 19 REGULATORY INFORMATION - EC Market EC Market Declaration of Conformity (DoC) Hereby, Panasonic Automotive Systems Europe GmbH declares that the radio equipment type Car Radio System with Bluetooth is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:

http://www.doc.panasonic.de The equipment can be used in all countries in the European Union without any restrictions. Continental 20 REGULATORY INFORMATION - EC Market CE xxxx Declaration of Conformity (DoC) Hereby, Panasonic Automotive Systems Europe GmbH declares that the radio equipment type Car Radio System with Bluetooth is in compliance with Directive 2014/53/EU. The equipment can be used in all countries in the European Union without any restrictions. Continental 21 REGULATORY INFORMATION FCC / ISED Modification statement / Dclaration de modification Panasonic Automotive & Industrial Systems Europe GmbH has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user's authority to operate the equipment. Panasonic Automotive & Industrial Systems Europe GmbH n'approuve aucune modification apporte a l'appareil par l'utilisateur, quelle qu'en soit la nature. Tout changement ou modification peuvent annuler le droit d'utilisation de l'appareil par l'utilisateur. Interference statement / Dclaration de l'interfrence This device complies with Part 15 of the FCC Rules and Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Continental 22 25/01/2019 11 25/01/2019 REGULATORY INFORMATION FCC / ISED FCC Class B digital device notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B) / NMB-3 (B) This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de classe B est conforme la norme canadienne NMB-003. Continental 23 REGULATORY INFORMATION FCC / ISED Radiation exposure statement / Dclaration d'exposition aux rayonnements This device complies with FCC and ISED radiation exposure limits. The antenna should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Le prsent appareil est en accord aux limites d'exposition humaine aux radiofrquences exigs par FCC et l'ISDE. L'antenne doit tre installe de faon garder une distance minimale de 20 centimtres entre la source de rayonnements et votre corps. L'metteur ne doit pas tre colocalis ni fonctionner conjointement avec a autre antenne ou autre metteur. Continental 24 12

MIB3E_MQB37w_BT MIB3E_MQB37w_BTWIFI USER MANUAL for Seat Leon 24.01.2019 Continental CONTENT GENERAL INSTRUCTIONS ...3 TECHNICAL INFORMATION .......4-5 INTRODUCTION TO OPERATION ..........6 PRIVACY SETTINGS INFORMATION........7 MANAGE FAVOURITES............8 RADIO OVERVIEW............9 BLUETOOTH - SEARCHING FOR MOBILE PHONES ..10 BLUETOOTH - CREATING A CONNECTION ..11 BLUETOOTH - DEAUTHORIZE A MOBILE TELEPHONE 12 BLUETOOTH - INTERACTING WITH MOBILE PHONE ...13 SMART LINK .....14 VEHICLE INFORMATION..15 MEDIA - RADIO, USB, BT AND SMARTLINK ......16 DRIVER ASSISTANCE .....17 SOUND ADUJSTMENTS..18 SYSTEM SETTINGS ......19 LEGAL INFORMATION ...20 REGULATORY INFORMATION CE MARKET.21 REGULATORY INFORMATION FCC / ISED.22-24 Continental 2 GENERAL INSTRUCTIONS Warning!

The MIB3 can distract your attention from the traffic conditions. You could cause an accident and place yourself and others in danger.

- Always devote your complete attention to the traffic situation.

- Only operate the MIB3 when traffic and driving conditions are appropriate.

- Set the volume to a level that allows you to hear important sounds outside the vehicle e.g. horns, sirens and alarms.

- High volumes can cause hearing damage.

- Always route the connection cable of the external device such that is does not restrict you when driving. Caution

- In some countries, some Infotainment functions can no longer be selected when the vehicle is running faster than a certain speed. This is not a malfunction, but complies with the national legal regulations. The MIB3 includes protective circuits that prevent damage to the device as far as possible:

- If the supply voltage is too low or too high, or if the MIB3 becomes too hot, the MIB3 will switch off automatically.

- Never open the MIB3 yourself in the event of a fault!

Take the faulty device to be repaired by a competent specialist repairer. We recommend that you use a service center for this work as this will ensure that trained workshop staff and the necessary parts and tools will be available. Continental 3 TECHNICAL INFORMATION The product MIB3 is developed and produced by Panasonic Automotive Systems Europe GmbH. The product is an integrated car entertainment systems. The MIB3 Entry series can support (depending on purchased configuration) several sources like MP3, USB (external connection box), Bluetooth, Wifi, AM/FM radio, android auto, Apple CarPlay and MirrorLink. Power supply voltage: Nominal: DC +12 [V]

Temperature range: -40 to +80 [degree C]

RF technical specification Bluetooth 4.2 Frequency range:

Maximum conducted RF Output Power:

Antenna gain:

Modulation:

For units with Wifi RF technical specification 2.4GHz Wifi:

Frequency range (no DFS):

Maximum conducted RF Output Power:

Antenna gain:

Modulation:

2402 MHz 2480 MHz 4 dBm or 2.5 mW

-6.6 dBi to +1.3 dBi FHSS 2412 MHz 2484 MHz 17 dBm or 50 mW

-10dBi to +0.4 dBi DSSS / OFDM Continental 4 TECHNICAL INFORMATION For units with Wifi RF technical specification 5GHz Wifi:

Frequency Range (no DFS):

5180 MHz; 5200 MHz; 5220 MHz; 5240 MHz 5745 MHz; 5765 MHz; 5785 MHz, 5805 MHz, 5825 MHz Bandwith1:

5 150 - 5 350 MHz:

5 735 - 5 835 MHz:

Bandwith2:

5 150 - 5 350 MHz:

5 735 - 5 835 MHz:

Bandwith3:

5 150 - 5 350 MHz:

5 735 - 5 835 MHz:

5190 MHz; 5230 MHz 5755 MHz; 5795 MHz 5210 MHz 5775 MHz Maximum conducted RF Output Power:

Antenna gain:

Modulation:

14 dBm or 25 mW

-5,4 dBi to +0,7 dBi OFDM Continental 5 INTRODUCTION TO OPERATION Long press on left control dial allows to switch the device on and off. Turning left control dial allows to change settings like volume. The MIB3 allows access to different menus with the function keys located below the display or the icons directly on the touch screen . Right control dial allows to browse through menus e.g. Settings and select options by pressing. Sliding over the touch screen left and right shows different pages. Returning to home screen is always possible by pressing the hard key.. Continental 6 PRIVACY SETTTINGS INFORMATION The MIB3 allows to adjust the privacy settings. The user can choose, which information will be provided to connected services. 1. Touch the position of the green square to open a second menu. 2. Select Privacy Settings to adjust the level of privacy. 3. Select the appropriate privacy level:

Essential data only: Services are deactivated. Only legally required services use data. Personal data: Services use only vehicle data and user data. Use my position: Services use position data, vehicle data and user data. Share my position: Primary and secondary users can also retrieve position data via the Skoda Connect portal or the app. Continental 7 MANAGE FAVOURITES

-- this function is currently unavailable The MIB3 allows to create shortcuts (favourites) for user friendly control of the device. 1. Touch and hold at the position of the green arrow and move down. This will open a second menu. 2. Long press on one of the Empty icon

. 3. Choose one of the features or select another page by sliding left or right. 4. To remove an already set favourite, long touch the icon and press the bin icon (green arrow). Continental 8 RADIO - OVERVIEW Press the left control dial to switch the radio on. 1. The AM/FM/DAB Radio can be started by pressing the function key AUDIO or the touch screen by toching the icon Audio. 2. The main Media screen of MIB3_EI HU, shows a favorite list. currently played radio channel or media source can be added by pressing a + icon. Also, from this screen, already added favorites can be deleted. 3. Touching the !Radio icon allows to choose between different sources like AM, FM and DAB bands. 4. Touching any of the available bands shows available channels within the selected band. Automatic scanning of channels can be done by touching the update icon. 5. Manual channel scanning can be done by touching the scan icon. Continental 9 BLUETOOTH - SEARCHING FOR MOBILE PHONES The MIB3 will search for devices that support Bluetooths Hands Free Profile (HFP) and Audio Streaming Profile (A2DP/AVRCP). 1. Activate Bluetooth on your mobile phone. If necessary make the mobile phone visible to other devices. 2. On the display press Telephone (note: the follwoing steps can only be done with ignition turned on). 3. Press Select mobile phone to select available devices. 4. If the mobile phone has not been connected to the MIB3 before, it will be shown under !Available Devices. 5. Select the mobile phone from the list of available devices e.g. the sample mobile iPhone. Continental 10 BLUETOOTH CREATING A CONNECTION Each mobile phone needs to be paired by exchanging a password. The pairing process can be started either from MIB3 or the mobile phone, if the car device does not show the mobile phone. 1. On the MIB3 screen select one of the available mobile phones to connect. 2. Confirm the pairing process. A passkey is exchanged. Confirmation needs to be done on MIB3 and the mobile phone. Allow data transfer on the mobile phone 3. Confirm the next screen with OK. 4. The chosen mobile phone appears under Known devices e.g. iPhone. Continental 11 BLUETOOTH DEAUTHORIZE A MOBILE PHONE

-- this function is currently unavailable Deauthorization can be conducted in the menu Telephone. 1. Enter the menu Telephone or press function key Phone. 2. Select on the connected device on the screen. 3. Press the icon

. 4. Press on the icon bin next to the device which should be deauthorized. Continental 12 BLUETOOTH INTERACTING WITH A MOBILE PHONE After successfully connecting to a mobile phone several new options will be available. 1. Select the function key Phone or the icon Telephoneon the touch screen to receive more options. 2. The Telephone screen will show the name of the connected phone on the top. Pressing the + icon allows to add contacts directly from the address book. 3. The icon Dial number allows to make phone, Emergency, and Breakdown calls. 4. The icon Contacts opens the address book of the mobile phone. 5. The icon Calls shows incoming and outgoing calls. The icon Settings allows to change the mobile phone, individualize the user profile, and change Mobile phone reminder and simultaneous call settings. Continental 13 SmartLink Android Auto, MirrorLink & CarPlay 1. Select the menu SmartLink. 2. Connect the mobile phone with the USB cable. 3. Select one of two options: Android Auto or MirrorLink. Confirm the pairing (exchange of key) on the MIB3 and the mobile phone. Allow data transfer on the mobile phone. Please note that the mobile phone needs to have the relevant apps installed. 4. Different Android Auto features can be found at the bottom of the screen:

1. Navigation / Maps 2. Communication / phone calls 3. Home screen 4. Music and audio 5. Return to MIB3 applications. The MIB3 will use GPS signal and media data from the mobile phone. 5. To disconnect the mobile phone use the disconnect icon . Continental 14 VEHICLE INFORMATION Vehicle information can be displayed by the MIB3. 1. On the default menu screen, select the Vehicle info icon or press the info function key. 2. Several menus can be accessed by selecting the icon Vehivle status. 3. Driving data can be accessed by touching such icon. 4. All other vehicle settings can be accessed by selecting the Settings icon. Continental 15 MEDIA RADIO, USB, BT AND SMARTLINK In this menu, several audio media sources can be selected for playing. 1. On the default menu screen, select the Audio icon or press the Audio function key. 2. When touching !Media, different media sources can be selected such as USB1 or USB2, Bluetooth audio or Smart link. 3. When selecting USB1, USB2 or BT audio sources, a media files list opens with the common media playing and browsing functionalities. 4. The media player can be shown by swiping from right edge to left. 5. All other media settings can be accessed by touching the

!Settings icon and selecting !Media Settings. Continental 16 Driver Assistance

-- this function is currently unavailable In this menu, driver assistance functions can be accessed and adjusted such as cruise control, lane assist, driver alert system, etc.. 1. On the default menu screen, select the Driver assist. icon to access driver assistance functionalities. 2. In the Driver assist. screen, graphical representations for many driver assistance functions are presented and allow the user to switch the functions on and off. 3. A complete list of driver assistance functions can be accessed and adjusted by selecting the settings icon . Continental 17 SOUND ADJUSTMENT MIB3 provides several options to individualize the sound in the car. 1. Select the icon Sound to view more options. 2. The Equalizer menu allows basic adjustments to the sound. 3. The Sound focus allows to control the focus point within the car. 4. The icon Volume provides options to individualize the volume of other systems and functions. 5. The icon Settings allows to enable or disable touchscreen and menu button tone. Continental 18 SYSTEM SETTINGS MIB3 system settings allow making a various amount of changes. 1. Select the icon Settings on the touch screen. 2. The following options are available:

No. Name 1 Screen 2 Time and date 3 Language 4 Additional keypad languages 5 Units 6 WLAN 7 Manage apps 8 Connect via Bluetooth 9 Factory settinsgs 10 System information 11 Updates 12 Copyrights 13 Configuration wizard Description Screen off (in seconds), brightness and other functions Time and date Allows to change the current language Individual adding of characters Changing units Creating hot spot (for devices with WLAN) Activating data transfer to Apps and managing Apps Switch on/off Bluetooth, control visibility of BT and BT-name Resetting the device complete or by individual functions Displaying hardware and software information Software updates for the head unit Thirt party copyright information Guided tour to set needed functions of MIB3 3. Using the icon leads to the previous page. Continental 19 LEGAL INFORMATION

-- this function is currently unavailable The MIB3 system allows to obtain fast legal information about the system. 1. On second page of the default menu screen (swipe left) then select the Legal Icon. 2. The Legal screen shows brief legal information and additional QR codes. With your mobile phone QR camera application, scan one the QR codes to visit the Skoda-Connect web pages for further legal information (, ). Continental 20 REGULATORY INFORMATION - EC Market EC Market Declaration of Conformity (DoC) Hereby, Panasonic Automotive Systems Europe GmbH declares that the radio equipment type Car Radio System with Bluetooth is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:

http://www.doc.panasonic.de The equipment can be used in all countries in the European Union without any restrictions. Continental 21 REGULATORY INFORMATION - USA/Canada market Modification statement / Dclaration de modification Panasonic Automotive & Industrial Systems Europe GmbH has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user's authority to operate the equipment. Panasonic Automotive & Industrial Systems Europe GmbH n'approuve aucune modification apporte a l'appareil par l'utilisateur, quelle qu'en soit la nature. Tout changement ou modification peuvent annuler le droit d'utilisation de l'appareil par l'utilisateur. Interference statement / Dclaration de l'interfrence This device complies with Part 15 of the FCC Rules and Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. FCC Class B digital device notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B) / NMB-3 (B) This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de classe B est conforme la norme canadienne NMB-003. Radiation exposure statement / Dclaration d'exposition aux rayonnements This device complies with FCC and ISED radiation exposure limits. The antenna should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Le prsent appareil est en accord aux limites d'exposition humaine aux radiofrquences exigs par FCC et l'ISDE. L'antenne doit tre installe de faon garder une distance minimale de 20 centimtres entre la source de rayonnements et votre corps. L'metteur ne doit pas tre colocalis ni fonctionner conjointement avec a autre antenne ou autre metteur. Continental 21

MIB3E_MQB37w_BT USER MANUAL for VW Golf 24.01.2019 Continental CONTENT GENERAL INSTRUCTIONS ...3 TECHNICAL INFORMATION .......4-5 INTRODUCTION TO OPERATION ..........6 PRIVACY SETTINGS INFORMATION........7 MANAGE FAVOURITES............8 RADIO OVERVIEW............9 BLUETOOTH - SEARCHING FOR MOBILE PHONES ..10 BLUETOOTH - CREATING A CONNECTION ..11 BLUETOOTH - DEAUTHORIZE A MOBILE TELEPHONE 12 BLUETOOTH - INTERACTING WITH MOBILE PHONE ...13 SMART LINK .....14 VEHICLE INFORMATION..15 MEDIA - RADIO, USB, BT AND SMARTLINK ......16 DRIVER ASSISTANCE .....17 SOUND ADUJSTMENTS..18 SYSTEM SETTINGS ......19 LEGAL INFORMATION ...20 REGULATORY INFORMATION CE MARKET.21 REGULATORY INFORMATION FCC / ISED.22-24 Continental 2 GENERAL INSTRUCTIONS Warning!

The MIB3 can distract your attention from the traffic conditions. You could cause an accident and place yourself and others in danger.

- Always devote your complete attention to the traffic situation.

- Only operate the MIB3 when traffic and driving conditions are appropriate.

- Set the volume to a level that allows you to hear important sounds outside the vehicle e.g. horns, sirens and alarms.

- High volumes can cause hearing damage.

- Always route the connection cable of the external device such that is does not restrict you when driving. Caution

- In some countries, some Infotainment functions can no longer be selected when the vehicle is running faster than a certain speed. This is not a malfunction, but complies with the national legal regulations. The MIB3 includes protective circuits that prevent damage to the device as far as possible:

- If the supply voltage is too low or too high, or if the MIB3 becomes too hot, the MIB3 will switch off automatically.

- Never open the MIB3 yourself in the event of a fault!

Take the faulty device to be repaired by a competent specialist repairer. We recommend that you use a service center for this work as this will ensure that trained workshop staff and the necessary parts and tools will be available. Continental 3 TECHNICAL INFORMATION The product MIB3 is developed and produced by Panasonic Automotive Systems Europe GmbH. The product is an integrated car entertainment systems. The MIB3 Entry series can support (depending on purchased configuration) several sources like MP3, USB (external connection box), Bluetooth, Wifi, AM/FM radio, android auto, Apple CarPlay and MirrorLink. Power supply voltage: Nominal: DC +12 [V]

Temperature range: -40 to +80 [degree C]

RF technical specification Bluetooth 4.2 Frequency range:

Maximum conducted RF Output Power:

Antenna gain:

Modulation:

For units with Wifi RF technical specification 2.4GHz Wifi:

Frequency range (no DFS):

Maximum conducted RF Output Power:

Antenna gain:

Modulation:

2402 MHz 2480 MHz 4 dBm or 2.5 mW

-6.6 dBi to +1.3 dBi FHSS 2412 MHz 2484 MHz 17 dBm or 50 mW

-10dBi to +0.4 dBi DSSS / OFDM Continental 4 TECHNICAL INFORMATION For units with Wifi RF technical specification 5GHz Wifi:

Frequency Range (no DFS):

5180 MHz; 5200 MHz; 5220 MHz; 5240 MHz 5745 MHz; 5765 MHz; 5785 MHz, 5805 MHz, 5825 MHz Bandwith1:

5 150 - 5 350 MHz:

5 735 - 5 835 MHz:

Bandwith2:

5 150 - 5 350 MHz:

5 735 - 5 835 MHz:

Bandwith3:

5 150 - 5 350 MHz:

5 735 - 5 835 MHz:

5190 MHz; 5230 MHz 5755 MHz; 5795 MHz 5210 MHz 5775 MHz Maximum conducted RF Output Power:

Antenna gain:

Modulation:

14 dBm or 25 mW

-5,4 dBi to +0,7 dBi OFDM Continental 5 INTRODUCTION TO OPERATION Long press on left control dial allows to switch the device on and off. Turning left control dial allows to change settings like volume. The MIB3 allows access to different menus with the touch icons located on the left side of the display or the icons directly on the touch screen . Right control dial allows to browse through menus e.g. Settings and select options by pressing. Sliding over the touch screen up and down shows different icons. Within menus the return icon allows to return to previous page. Returning to home screen can be done by touching the icon. Continental 6 PRIVACY SETTTINGS INFORMATION

-- No available in VW --

The MIB3 allows to adjust the privacy settings. The user can choose, which information will be provided to connected services. 1. Touch and hold a finger at the position of the green arrow. Moving the finger down will open a second menu. 2. Select Essential data only to adjust the level of privacy. For more information press the info icon (see green arrow). 3. Select the appropriate privacy level:

Essential data only: Services are deactivated. Only legally required services use data. Personal data: Services use only vehicle data and user data. Use my position: Services use position data, vehicle data and user data. Share my position: Primary and secondary users can also retrieve position data via the Skoda Connect portal or the app. Continental 7 MANAGE FAVOURITES The MIB3 allows to create shortcuts (favourites) for user friendly control of the device. 1. Touch and hold at the position of the green arrow and move down. This will open a second menu. 2. Long press on one of the favorite icons. 3. Choose one of the features or select another page by sliding left or right, then long press and drag to one of the four favorite locations. Continental 8 RADIO - OVERVIEW Press the left control dial to switch the Head Unit on. 1. The AM/FM/DAB Radio can be started by toching the icon Entertain. 2. The favorite screen of MIB3_EI HU, shows a favorite list . Currently played radio channel or media source can be added by pressing a + icon. Also, from this screen, already added favorites can be deleted by touching the icon. 3. Touching the Radio icon allows to choose between different sources like AM, FM and DAB bands. 4. Touching any of the available bands shows available channels within the selected band. Automatic scanning of channels can be done by touching the update icon. 5. Manual channel scanning can be done by touching the scan icon. Continental 9 BLUETOOTH - SEARCHING FOR MOBILE PHONES The MIB3 will search for devices that support Bluetooths Hands Free Profile (HFP) and Audio Streaming Profile (A2DP/AVRCP). Activate Bluetooth on your mobile phone. If necessary make the mobile phone visible to other devices. 1. On the display press Telephone (note: the follwoing steps can only be done with ignition turned on). 2. Press the settings icon then Select mobile phone to select available devices. 3. If the mobile phone has not been connected to the MIB3 before, it will be shown under !Available Devices; otherwise, under known devices. 4. Select the mobile phone from the list of available devices e.g. the sample mobile iPhone. Continental 10 BLUETOOTH CREATING A CONNECTION Each mobile phone needs to be paired by exchanging a password. The pairing process can be started either from MIB3 or the mobile phone, if the car device does not show the mobile phone. 1. On the MIB3 screen select one of the available mobile phones to connect. 2. Confirm the pairing process. A passkey is exchanged. Confirmation needs to be done on MIB3 and the mobile phone. Allow data transfer on the mobile phone 3. Confirm the next screen with OK. 4. The chosen mobile phone appears under Known devices e.g. iPhone. Continental 11 BLUETOOTH DEAUTHORIZE A MOBILE PHONE

-- this function is currently unavailable Deauthorization can be conducted in the menu Telephone. 1. Enter the menu Telephone or press function key Phone. 2. Select on the connected device on the screen. 3. Press the icon

. 4. Press on the icon bin next to the device which should be deauthorized. Continental 12 BLUETOOTH INTERACTING WITH A MOBILE PHONE After successfully connecting to a mobile phone several new options will be available. 1. Select the icon Telephone on the touch screen to receive more options. 2. The icon Dial number allows to make phone, Emergency, and Breakdown calls. 3. The icon Contacts opens the address book of the mobile phone. 5. The icon Calls shows incoming and outgoing calls. The icon Settings allows to change the mobile phone, individualize the user profile, and change Mobile phone reminder and simultaneous call settings. Continental 13 SmartLink Android Auto, MirrorLink & CarPlay 1. Select the menu App-Connect. 2. Connect the mobile phone with the USB cable. 3. Select one of two options: Android Auto or MirrorLink. Confirm the pairing (exchange of key) on the MIB3 and the mobile phone. Allow data transfer on the mobile phone. Please note that the mobile phone needs to have the relevant apps installed. 4. Different Android Auto features can be found at the bottom of the screen:

1. Navigation / Maps 2. Communication / phone calls 3. Home screen 4. Music and audio 5. Return to MIB3 applications. The MIB3 will use GPS signal and media data from the mobile phone. 5. To disconnect the mobile phone use the disconnect icon . Continental 14 VEHICLE INFORMATION Vehicle information can be displayed by the MIB3. 1. On the default menu screen, select the Vehicle icon or press the CAR function key. 2. Several menus can be accessed by selecting the icon !Vehicle stat. Continental 15 MEDIA RADIO, USB, BT AND SMARTLINK In this menu, several audio media sources can be selected for playing. 1. On the default menu screen, select the Audio icon or press the Audio function key. 2. When touching !Media, different media sources can be selected such as USB1 or USB2, Bluetooth audio or Smart link. 3. When selecting USB1, USB2 or BT audio sources, a media files list opens with the common media playing and browsing functionalities. 4. The media player can be shown by swipping from right edge to left. 5. All other media settings can be accessed by touching the

!Settings icon and selecting !Media Settings. Continental 16 Driver Assistance

-- this function is currently unavailable In this menu, driver assistance functions can be accessed and adjusted such as cruise control, lane assist, driver alert system, etc.. 1. On the default menu screen, select the Driver assist. icon to access driver assistance functionalities. 2. In the Driver assist. screen, graphical representations for many driver assistance functions are presented and allow the user to switch the functions on and off. 3. A complete list of driver assistance functions can be accessed and adjusted by selecting the settings icon . Continental 17 SOUND ADJUSTMENT MIB3 provides several options to individualize the sound in the car. 1. Select the icon Sound to view more options. 2. The Equalizer menu allows basic adjustments to the sound. 3. The Sound focus allows to control the focus point within the car. 4. The icon Volume provides options to individualize the volume of other systems and functions. 5. The icon Settings allows to enable or disable touchscreen and menu button tone. Continental 18 SYSTEM SETTINGS MIB3 system settings allow making a various amount of changes. 1. Select the icon Settings on the touch screen. 2. The following options are available:

No. Name 1 Screen 2 Time and date 3 Language 4 Additional keypad languages 5 Units 6 WLAN 7 Manage apps 8 Connect via Bluetooth 9 Factory settinsgs 10 System information 11 Updates 12 Copyrights 13 Configuration wizard Description Screen off (in seconds), brightness and other functions Time and date Allows to change the current language Individual adding of characters Changing units Creating hot spot (for devices with WLAN) Activating data transfer to Apps and managing Apps Switch on/off Bluetooth, control visibility of BT and BT-name Resetting the device complete or by individual functions Displaying hardware and software information Software updates for the head unit Thirt party copyright information Guided tour to set needed functions of MIB3 3. Using the icon leads to the previous page. Continental 19 LEGAL INFORMATION

-- this function is currently unavailable The MIB3 system allows to obtain fast legal information about the system. 1. On second page of the default menu screen (swipe left) then select the Legal Icon. 2. The Legal screen shows brief legal information and additional QR codes. With your mobile phone QR camera application, scan one the QR codes to visit the Skoda-Connect web pages for further legal information (, ). Continental 20 REGULATORY INFORMATION - EC Market EC Market Declaration of Conformity (DoC) Hereby, Panasonic Automotive Systems Europe GmbH declares that the radio equipment type Car Radio System with Bluetooth is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:

http://www.doc.panasonic.de The equipment can be used in all countries in the European Union without any restrictions. Continental 21 REGULATORY INFORMATION - USA/Canada market Modification statement / Dclaration de modification Panasonic Automotive & Industrial Systems Europe GmbH has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user's authority to operate the equipment. Panasonic Automotive & Industrial Systems Europe GmbH n'approuve aucune modification apporte a l'appareil par l'utilisateur, quelle qu'en soit la nature. Tout changement ou modification peuvent annuler le droit d'utilisation de l'appareil par l'utilisateur. Interference statement / Dclaration de l'interfrence This device complies with Part 15 of the FCC Rules and Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. FCC Class B digital device notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B) / NMB-3 (B) This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de classe B est conforme la norme canadienne NMB-003. Radiation exposure statement / Dclaration d'exposition aux rayonnements This device complies with FCC and ISED radiation exposure limits. The antenna should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Le prsent appareil est en accord aux limites d'exposition humaine aux radiofrquences exigs par FCC et l'ISDE. L'antenne doit tre installe de faon garder une distance minimale de 20 centimtres entre la source de rayonnements et votre corps. L'metteur ne doit pas tre colocalis ni fonctionner conjointement avec a autre antenne ou autre metteur. Continental 21

ITH RADIO AND BLUETOO Eauipment: HEADUNT Wi pecan ere ensaneet

@ Model t# MIB3E_MOB37w_8T 53 035 6880 CZH Agree par ANF StH/ANF/2020 This product hes been Type Approved by ANATEL: 08057-19-05178 AGREE PAR L'ANRT MAROC. rment: MR 21473 ANRT 2019 CV-RV4BXHAEB 01S PM-00109 06 22613F0214 ied f FeAzEBERD Connection and.use of tis corrmunicsbons

| eee Noen Jamaica SVALMIB3E_MQBS7w_BT

| Cenarion Commission CNC ID: C-24233

Y Q@cowr2oiPoscoT0 FCC ID: WUQ-MIB3VBT iC: 216R-MIB3VBT 4 i 26/11/2018 veteae Panasonic i euaomotwe Systems Czech $10 NOA APPROVED Complies with Panasonic Ateratns eerie. cz Be ee ies 229 MDA Standards CVRV4BXHAEBO000003 |__ Datos282

inCzech Republic Bi:

=m 09/08/2022

22_Product_Label_Design_MIB3E_MQB37_BTWIFI Leon 1 CONFIDENTIAL 1 Panasonic Automotive | 2018

22_Product_Label_Design_MIB3E_MQB37_BTWIFI Golf 1 CONFIDENTIAL 1 Panasonic Automotive | 2018

Panasonic Automotive Systems Europe GmbH Date: 08/09/2022 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca C/ Severo Ochoa 2 & 6 29590 Campanillas Mlaga, Espaa Ref: Confidentiality request for FCC ID: WUQ-MIB3VBT To whom it may concern:

Pursuant to 0.457(d)(1)(ii) and 0.459 of the Commissions Rules (47 C.F.R.) and 552 (b)(4) of the Freedom of Information Act, Panasonic Automotive Systems Europe GmbH hereby request requests that a part of the subject FCC application be held confidential to avoid release of sensitive information of the product to the public. For the product stated above, we request that the following information be withheld from public disclose:

Type of Confidentiality Requested Exhibit Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent Permanent Permanent Block Diagrams External Photos Internal Photos Operation Description Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual SDR software and security information Permanent Confidentiality:

The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to us and provide unjustified benefits to our competitors. Short-Term Confidentiality:

We hereby request short-term confidentiality for the product stated above to avoid premature release of sensitive information prior to marketing or release of the product to the public. Release date of short term confidentiality is:

45 days from grant date marked 90 days from grant date marked 135 days from grant date marked 180 days from grant date marked Specific date:

We are also aware that we are responsible to notify DEKRA in the event information regarding the product or the product is made available to the public. DEKRA will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, __________________________ By: Hisayoshi Nakao Title: Managing Director Company: Panasonic Automotive Systems Europe GmbH Tel.: +49 6103 3759 541 Mobil: +49 173 5163958 Email: yoshi.nakao@eu.panasonic.com FCB012_04 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless

Date: 20/11/2020 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca C/ Severo Ochoa 2 & 6 29590 Campanillas Mlaga, Espaa Ref: Agent letter for FCC ID: WUQ-MIB3VBT We, hereby authorize Panasonic Automotive Systems Europe GmbH Robert Bosch Str. 27-29, 63225 Langen, Germany DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca C/ Severo Ochoa n 2 29590 Campanillas - Malaga Spain Ms. Carmen Cabello e-mail: carmen.cabello@dekra.com Phone: +34 952 619 352 to act as our agent in the preparation of this application for equipment certification, including the signing of all documents relating to these matters. The present authorization considers the development of documents on behalf of the client, written under his own letterhead and related to the necessary information to be provided on his behalf to complete the certification process. We also hereby certify that neither we nor any party to this application are subject to a denial of U.S. Federal benefits, which include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862 because of conviction for possession or distribution of controlled substance. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by DEKRA Testing and Certification, S.A.U., still resides with us. This agreement expires one year from the current date. Sincerely, __________________________ By: Armin Montigny Title: Senior Manager R&D Company: Panasonic Automotive Systems Europe GmbH Telephone: +49 (0) 6103 3759 198 e-mail: armin.montigny@eu.panasonic.com FCB011_02 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless

Date: 20/11/2020 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca C/ Severo Ochoa 2 & 6 29590 Campanillas Mlaga, Espaa Ref: Confidentiality request for FCC ID: WUQ-MIB3VBT To whom it may concern:

Pursuant to 0.457(d)(1)(ii) and 0.459 of the Commissions Rules (47 C.F.R.) and 552 (b)(4) of the Freedom of Information Act, Panasonic Automotive Systems Europe GmbH hereby request requests that a part of the subject FCC application be held confidential to avoid release of sensitive information of the product to the public. For the product stated above, we request that the following information be withheld from public disclose:

Permanent Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent Exhibit Block Diagrams External Photos Internal Photos Operation Description Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual Permanent Confidentiality:

The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to us and provide unjustified benefits to our competitors. Short-Term Confidentiality:

We hereby request short-term confidentiality for the product stated above to avoid premature release of sensitive information prior to marketing or release of the product to the public. Release date of short term confidentiality is:

45 days from grant date marked 90 days from grant date marked 135 days from grant date marked 180 days from grant date marked Specific date:

We are also aware that we are responsible to notify DEKRA in the event information regarding the product or the product is made available to the public. DEKRA will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, __________________________ By: Armin Montigny Title: Senior Manager R&D Company: Panasonic Automotive Systems Europe GmbH Telephone: +49 (0) 6103 3759 198 e-mail: armin.montigny@eu.panasonic.com FCB012_02 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless

Date: November 20, 2020 to:

from:

Regulatory Certification Body DEKRA Testing and Certification, S.A.U. Parque C/ Severo Ochoa n 2. 29590 Campanillas Malaga. Spain Tecnolgico de Andaluca. Panasonic Automotive Systems Europe GmbH Bosch Str. 27-29, 63225 Langen, Germany Related to product:

Model name FCC ID MIB3E_MQB37w_BT WUQ-MIB3VBT MIB3E_MQB37w_BTWIFI WUQ-MIB3VBTWIFI To whom it may concern, We, Panasonic Automotive Systems Europe GmbH (FCC Grantee Code: WUQ), hereby declare that we would like to perform a Class II Permissive Change for FCC because some changes have been carried out to original designs. These modifications are HW and mechanical changes done to optimized the operation of the product. In any case they have an impact in RF characteristics of the products reported at initial certification. For your reference, you may find enclosed to this application the list of modifications. We are submitting the following new evidences related to the product, since they are different from the initial homologation:

Partial RF and EMC test reports Schematics Internal Photographs Sincerely, __________________________ By: Armin Montigny Title: Senior Manager R&D Company: Panasonic Automotive Systems Europe GmbH Telephone: +49 (0) 6103 3759 198 e-mail: armin.montigny@eu.panasonic.com

Panasonic Panasonic Automotive Systems Europe GmbH Headquarters Langen Date: 08.08.2019 DEKRA Testing and Certification, S.A.U. Parque Tecnoldgico de Andalucia C/ Severo Ochoa 2 & 6 29590 Campanillas Malaga, Espafia Ref: Agent letter for FCC ID: WUQ-MIB3VBT We, Panasonic Automotive Systems Europe GmbH Robert Bosch Str. 27-29, 63225 Langen, Germany hereby authorize DEKRA Testing and Certification, S.A.U. Parque Tecnoldgico de Andalucia C/ Severo Ochoa n 2 29590 Campanillas - Malaga Spain Ms. Carmen Cabello e-mail: carmen.cabello@dekra.com Phone: +34 952 619 352 to act as our agent in the preparation of this application for equipment certification, including the signing of all documents relating to these matters. The present authorization considers the development of documents on behalf of the client, written under his own letterhead and related to the necessary information to be provided on his behalf to complete the certification process. We also hereby certify that neither we nor any party to this application are subject to a denial of U.S. Federal benefits, which include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862 because of conviction for possession or distribution of controlled substance. For instances where our authorized agent signs the application for certification on our behalf, |

acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by DEKRA Testing and Certification, S.A.U., still resides with us. This agreement expires one year from the current date. Panasonic AUTOMOTIVE Panasonic Automotive Systems Europe GmbH

-Bosch-Str. 27-29, 63225 Langen By: Armin Montigny Title: Senior Manager R&D Company: Panasonic Automotive Systems Europe GmbH Telephone: +49 (0) 6103 3759 198 e-mail: armin.montigny@eu.panasonic.com Panasonic Automotive Systems Europe GmbH Robert-Bosch-Strae 27-29 63225 Langen, Germany (Headquarters) CEO: Takeyuki Yamanaka Bankverbindung: Deutsche Bank Hamburg IBAN: DE 62 2007 0000 0090 266800 BIC: DEUTDEHH Amtsgericht Offenbach HRB-49866

Panasonic Panasonic Automotive Systems Europe GmbH Headquarters Langen Date: 8/8/2019 DEKRA Testing and Certification, S.A.U. Parque Tecnoldgico de Andalucia C/ Severo Ochoa 2 & 6 29590 Campanillas Malaga, Espajfia Ref: Confidentiality request for FCC ID: WUQ-MIB3VBT To whom it may concern:

Pursuant to 0.457(d)(1)(ii) and 0.459 of the Commissions Rules (47 C.F.R.) and 552 (b)(4) of the Freedom of Information Act, Panasonic Automotive Systems Europe GmbH hereby request requests that a part of the subject FCC application be held confidential to avoid release of sensitive information of the product to the public. For the product stated above, we request that the following information be withheld from public disclose:

Type of Confidentiality Requested Exhibit 1 Short Term I] Permanent Block Diagrams XX] Short Term External Photos KX] Short Term Internal Photos

(J Short Term XX] Permanent Operation Description 1 Short Term LJ Permanent Parts List & Placement/BOM C1 Short Term CJ Permanent Tune-Up Procedure CJ Short Term KX] Permanent Schematics KI Short Term Test Setup Photos KI] Short Term Users Manual Permanent Confidentiality:

The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to us and provide unjustified benefits to our competitors. Short-Term Confidentiality:

We hereby request short-term confidentiality for the product stated above to avoid premature release of sensitive information prior to marketing or release of the product to the public. Release date of short term confidentiality is:

45 days from grant date marked oO 90 days from grant date marked oO 135 days from grant date marked oO 180 days from grant date marked kl Specific date:

We are also aware that we are responsible to notify DEKRA in the event information regarding the product or the product is made available to the public. DEKRA will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Panasonic AUTOMOTIVE onic Automotive Systems Europa GmbH bert-Bosch-Str. 27-29, 63225 Langen

: Armin Montigny Title: Senior Manager R&D Company: Panasonic Automotive Systems Europe GmbH Telephone: +49 (0) 6103 3759 198 e-mail: armin.montigny@eu.panasonic.com Panasonic Automotive Systems Europe GmbH Robert-Bosch-Strake 27-29 63225 Langen, Germany (Headquarters) CEO: Takeyuki Yamanaka Bankverbindung: Deutsche Bank Hamburg IBAN: DE 62 2007 0000 0090 266800 BIC: DEUTDEHH Amtsgericht Offenbach HRB-49866

Panasonic 07/10/19 ATTESTATION STATEMENT Declaration on similarities between variants TO WHOM IT MAY CONCERN We, Panasonic Automotive Systems Europe GmbH, located in Robert-Bosch Str.27-29, Langen, 63225, Germany, declare on our sole responsibility that the equipment model MIB3E_MQB37w_BT, part numbers 5HO.035.869 and 5FA.035.875, have same main PCB and RF modules. Main differences are display frame, type of buttons and front panel PCB. Additionally they have different HMI that needed different number of SW release to fix bugs, resulting in different SW versions between part numbers. Operation characteristics remains in both part numbers and are not affected by different SW version. By: Andreas Grziwotz Company: Panasonic Automotive Systems Europe GmbH Telephone: +49 71179723472 e-mail: Andreas.Grziwotz@eu.panasonic.com

DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 Test report No:

NIE: 51929RRF.021 Partial Test Report USA FCC Part 15.247, 15.209 CANADA RSS-247, RSS-Gen Radio Frequency Devices. Operation within the bands 902 - 928 MHz, 2400

-2483.5 MHz, and 5725 - 5850 MHz. Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Devices. General Requirements and Information for the Certification of Radio Apparatus.

(*) Identification of item tested Headunit with radio and Bluetooth

(*) Trademark Panasonic

(*) Model and /or type reference MIB3E_MQB37w_BT Other identification of the product FCC ID: WUQ-MIB3VBT IC: 216R-MIB3VBT PN: 5FA.035.875 HW version: X85 SW version: X645 Bluetooth, FM, AM, DAB, USB. PANASONIC AUTOMOTIVE SYSTEMS EUROPE GMBH Robert Bosch Str. 27-29 63225 Langen - Germany USA FCC Part 15.247 10-1-18 Edition: Operation within the bands 902 - 928 MHz, 2400 -2483.5 MHz, and 5725 - 5850 MHz.

-Emission limitations radiated (Transmitter). USA FCC Part 15.209 10-1-18 Edition: Radiated emission limits; general requirements. CANADA RSS-247 Issue 2 (February 2017).

-Emission limitations radiated (Transmitter). CANADA RSS-Gen Issue 5 (April 2018). Guidance for Performing Compliance Measurements on Digital Transmission System, Frequency Hopping Spread Spectrum System, and Hybrid Systems Devices Operating Under Section 15.247 of the FCC Rules. 558074 D01 Meas Guidance v05r02 dated April 2, 2019. ANSI C63.10-2013: American National Standard for Testing Unlicensed Wireless Devices. 2019-09-27

(*) Features Applicant Test method requested, standard Report No: (NIE) 51929RRF.021 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 Approved by (name / position & signature) A. Llamas RF Lab. Manager Date of issue 2019-09-27 Report template No FDT08_22

(*) Data provided by the client Report No: (NIE) 51929RRF.021 Page 2 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 Index Competences and guarantees .................................................................................................... 4 General conditions ...................................................................................................................... 4 Uncertainty ................................................................................................................................. 4 Data provided by the client .......................................................................................................... 4 Usage of samples ....................................................................................................................... 5 Test sample description .............................................................................................................. 5 Identification of the client............................................................................................................. 6 Testing period and place ............................................................................................................. 6 Document history ........................................................................................................................ 6 Environmental conditions ............................................................................................................ 6 Remarks and comments ............................................................................................................. 7 Testing verdicts ........................................................................................................................... 7 Summary .................................................................................................................................... 8 Appendix A: Test results. Bluetooth EDR (GFSK, Pi/4 DQPSK, 8DPSK) .................................... 9 Report No: (NIE) 51929RRF.021 Page 3 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 Competences and guarantees DEKRA Testing and Certification S.A.U. is a testing laboratory accredited by the National Accreditation Body

(ENAC -Entidad Nacional de Acreditacin), to perform the tests indicated in the Certificate No. 51/LE 147. DEKRA Testing and Certification is a FCC-recognized accredited testing laboratory with appropriate scope of accreditation that include testing performed in this test report. DEKRA Testing and Certification is an ISED-recognized accredited testing laboratory with appropriate scope of accreditation that include testing performed in this test report In order to assure the traceability to other national and international laboratories, DEKRA Testing and Certification S.A.U. has a calibration and maintenance program for its measurement equipment. DEKRA Testing and Certification S.A.U. guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated on the report and, it is based on the knowledge and technical facilities available at DEKRA Testing and Certification S.A.U. at the time of performance of the test. DEKRA Testing and Certification S.A.U. is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA Testing and Certification S.A.U. General conditions 1. This report is only referred to the item that has undergone the test. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of DEKRA Testing and Certification S.A.U. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of DEKRA Testing and Certification S.A.U. and the Accreditation Bodies. Uncertainty Uncertainty (factor k=2) was calculated according to the DEKRA Testing and Certification S.A.U. internal document PODT000. Data provided by the client The following data has been provided by the client:

1. Information relating to the description of the sample ("Identification of the item tested", "Trademark",

"Model and/or type reference tested"). 2. The sample consists of an Automotive head unit to be installed in cars with the following features:

Bluetooth, FM, AM, DAB, USB. DEKRA Testing and Certification S.A.U. declines any responsibility with respect to the information provided by the client and that may affect the validity of results. Report No: (NIE) 51929RRF.021 Page 4 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 Usage of samples Samples undergoing test have been selected by: The client.

- Sample S/01 is composed of the following elements:

Control N Description Model Serial N Date of reception 51929B/543 Head unit with radio MIB3E_MQB37w_BT PM6-

2019/06/27 and Bluetooth 00121.02.19413E0003 51292B/538 Harness

---

---

2019/06/05 Sample S/01 has undergone the following test(s): All RADIATED tests indicated in Appendix A. Test sample description Ports. :

Cable Port name and description Specifie d max length

[m]

Attached during test Shielded Coupled to patient(3) Rated power supply .................... :

Reference poles Voltage and Frequency DC: 12 Vdc L1 L2 L3 N PE Rated Power ............................... :

Clock frequencies ....................... :

Other parameters ........................ :

Software version ......................... :

Hardware version ........................ :

Dimensions in cm (W x H x D) .... :

X645 X85 Mounting position ........................ :

Other: Installed in cars Modules/parts ............................. :

Module/parts of test item Type Manufacturer Accessories (not part of the test item) ............................................ :

Description Type Manufacturer Report No: (NIE) 51929RRF.021 Page 5 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 Documents as provided by the applicant ...................................... :

(3) Only for Medical Equipment Description File name Issue date Identification of the client PANASONIC AUTOMOTIVE SYSTEMS EUROPE GMBH Robert Bosch Str. 27-29 63225 Langen - Germany Testing period and place Test Location DEKRA Testing and Certification S.A.U. Date (start) 2019-07-18 Date (finish) 2019-07-25 Document history Report number Date Description 51929RRF.021 2019-09-27 First release Environmental conditions In the control chamber, the following limits were not exceeded during the test:

Temperature Relative humidity Min. = 15 C Max. = 35 C Min. = 20 %

Max. = 75 %

In the semianechoic chamber, the following limits were not exceeded during the test. Temperature Relative humidity Min. = 15 C Max. = 35 C Min. = 20 %

Max. = 75 %

Report No: (NIE) 51929RRF.021 Page 6 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 Remarks and comments The tests have been performed by the technical personnel: Ignacio Cabra, Miguel Angel Torres and Jos Gabriel Pendn. Used instrumentation:

Radiated Measurements:

1. 2. Semianechoic Absorber Lined Chamber ETS LINDGREN FACT 3 200 STP EMI Test Receiver ROHDE AND SCHWARZ ESR7 Last Calibration Due Calibration N.A. N.A. 2018/10 2020/10 3. RF Pre-amplifier 40 dB, 10 MHz-6 GHz BONN 2019/02 2020/08 4. 5. ELEKTRONIK BLNA 0160-01N Biconical/Log Antenna ETS LINDGREN 3142E Signal and Spectrum Analyzer ROHDE AND SCHWARZ FSV40 2017/09 2020/09 2018/02 2020/02 6. RF Pre-amplifier 30 dB, 1-18GHz BONN 2019/04 2020/04 ELEKTRONIK BLMA 0118-3A 7. RF Pre-amplifier, 30 dB, 18-40GHz BONN 2019/02 2021/02 8. 9. ELEKTRONIK BLMA 1840-1M Broadband Horn antenna 1-18 GHz SCHWARZBECK MESS-ELEKTRONIK BBHA 9120 D Broadband Horn antenna 18-40 GHz SCHWARZBECK MESS-ELEKTRONIK BBHA 9170 10. DC Power Supply Keysight Technologies U8002A 2018/01 2021/01 2018/07 2021/07

---

---

11. Digital multimeter FLUKE 179 2019/06 2020/06 Testing verdicts Not applicable:

N/A Pass:

Fail:

P F Not measured:

N/M Report No: (NIE) 51929RRF.021 Page 7 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 Summary 1. Bluetooth EDR FCC PART 15 PARAGRAPH / RSS-247 Requirement Test case Verdict Remark Section 15.247 Subclause (a) (1) / RSS-247 5.1. (b) 20 dB Bandwidth and Carrier frequency separation Section 15.247 Subclause (a)(1)(iii) / RSS-247 Clause 5.1 (d) Number of hopping channels Section 15.247 Subclause (a)(1)(iii) / RSS-247 Clause 5.1 (d) Time of occupancy (Dwell Time) Maximum peak output power and antenna gain Conducted Band-edge emissions compliance (Transmitter) Emission limitations conducted

(Transmitter) Emission limitations radiated

(Transmitter) Section 15.247 Subclause (b) / RSS-247 5.4. (b) Section 15.247 Subclause (d) / RSS-247 5.5. Section 15.247 Subclause (d) / RSS-247 5.5 Section 15.247 Subclause (d) / RSS-247 5.5. Supplementary information and remarks:

(1) Test not requested. N/M

(1) N/M

(1) N/M

(1) N/M

(1) N/M

(1) N/A P Report No: (NIE) 51929RRF.021 Page 8 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 Appendix A: Test results. Bluetooth EDR

(GFSK, Pi/4 DQPSK, 8DPSK) Report No: (NIE) 51929RRF.021 Page 9 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 INDEX TEST CONDITIONS ........................................................................................................................................ 11 FCC Section 15.247 Subclause (d) / RSS-247 Clause 5.5. Emission limitations radiated

(Transmitter) ..................................................................................................................................................... 13 Report No: (NIE) 51929RRF.021 Page 10 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 POWER SUPPLY (V):

V nonimal: 12 Vdc. TEST CONDITIONS Type of Power Supply: External power supply (Battery). Type of Antenna: Internal antenna. Declared Gain for antenna RF (maximum): 1.3 dBi TEST FREQUENCIES:

Low Channel: 2402 MHz Middle Channel: 2441 MHz High Channel: 2480 MHz RADIATED MEASUREMENTS All radiated tests were performed in a semi-anechoic chamber. The measurement antenna (Bilog antenna for the range between 30 MHz to 1000 MHz) is situated at a distance of 3 m and at a distance of 1m for the frequency range 1 GHz-26 GHz (1 GHz-18 GHz Double ridge horn antenna and 18 GHz-40 GHz horn antenna). For radiated emissions in the range 1 GHz-26 GHz that is performed at a distance closer than the specified distance, an inverse proportionality factor of 20 dB per decade is used to normalize the measured data for determining compliance. The equipment under test was set up on a non-conductive platform above the ground plane and the situation and orientation was varied to find the maximum radiated emission. It was also rotated 360 and the antenna height

(Bilog antenna and Double ridge horn antenna) was varied from 1 to 4 meters to find the maximum radiated emission. Measurements were made in both horizontal and vertical planes of polarization. Report No: (NIE) 51929RRF.021 Page 11 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 Radiated measurements setup from 30 MHz to 1 GHz:

Radiated measurements setup f > 1 GHz:

Report No: (NIE) 51929RRF.021 Page 12 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 FCC Section 15.247 Subclause (d) / RSS-247 Clause 5.5. Emission limitations radiated

(Transmitter) SPECIFICATION:

Radiated emissions which fall in the restricted bands, as defined in Section 15.205(a), must also comply with the radiated emission limits specified in Section 15.209(a) (see Section 15.205(c)/RSS-Gen):

Frequency Range Field strength (V/m) Field strength

(MHz)

(dBV/m) Measurement distance (m) 0.009-0.490 2400/F(kHz) 0.490-1.705 24000/F(kHz) 1.705 - 30.0 30 - 88 88 - 216 216 - 960 960 - 10000 30 100 150 200 500

-

-

-

40 43.5 46 54 300 30 30 3 3 3 3 The emission limits shown in the above table are based on measurements employing CISPR quasi-peak detector except for the frequency bands 9-90 kHz, 110-490 kHz and above 1000 MHz. Radiated emission limits in these three bands are based on measurements employing an average detector. For average radiated emission measurements above 1000 MHz, there is also a limit corresponding to 20 dB above the indicated values in the table is specified when measuring with peak detector function. RSS-247: Attenuation below the general field strength limits specified in RSS-Gen is not required. RESULTS:

The situation and orientation was varied to find the maximum radiated emission. It was also rotated 360 and the antenna height was varied from 1 to 4 meters to find the maximum radiated emission. Measurements were made in both horizontal and vertical planes of polarization. All tests were performed in a semi-anechoic chamber at a distance of 3 m for the frequency range 30 MHz-

1000 MHz and at distance of 1m for the frequency range 1 GHz-26 GHz. The field strength is calculated by adding correction factor to the measured level from the spectrum analyzer. This correction factor includes antenna factor, cable loss and pre-amplifiers gain. Report No: (NIE) 51929RRF.021 Page 13 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 Frequency range 30 MHz - 1 GHz:

Note: The spurious emissions below 1 GHz do not depend on either the operating channel or the modulation mode selected in the EUT. Spurious levels operating (radiated) closest to limit. Spurious frequency Detector

(MHz) 574.995 Quasi peak 599.988 Quasi peak Quasi peak 622.46 Emission Level

(dBV/m) Measurement Polarization Uncertainty 36.7 41.4 32.6 V V V

(dB)

< 2.07

< 2.07

< 2.07 Frequency range 1 - 26 GHz:

The results in the next tables show the maximum measured levels in the 1-26 GHz range including the restricted bands 2.31-2.39 GHz and 2.4835-2.5 GHz. Spurious signals with peak levels above the average limit (54 dBV/m at 3 m) are measured with average detector for checking compliance with the average limit. Modulation: GFSK (DH5) 1. CHANNEL: LOWEST (2402 MHz). Spurious frequency

(GHz) 2.287967 3.08983 3.10150 4.34703 4.35310 4.80343 4.80437 5.61730 6.28043 7.20583 Detector Peak Average Peak Peak Peak Peak Peak Peak Peak Peak Peak Emission Level

(dBV/m) 55.37 51.97 47.30 47.36 51.51 50.80 46.97 42.97 43.78 42.14 48.26 Measurement Polarization Uncertainty

(dB)

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88 V V H V H V H V H V Report No: (NIE) 51929RRF.021 Page 14 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 2. CHANNEL: MIDDLE (2441 MHz). Spurious frequency

(GHz) 1.86730 2.09463 3.09030 4.33863 4.87997 6.2837 7.31923 Detector Peak Average Peak Average Peak Peak Peak Peak Peak Emission Level

(dBV/m) 56.77 37.51 57.57 53.32 50.80 50.40 49.07 41.86 49.55 Measurement Polarization Uncertainty

(dB)

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88 H V V V H V H 3. CHANNEL: HIGHEST (2480 MHz). Spurious frequency

(GHz) 1.86030 2.187167 3.10477 4.34423 4.95977 7.44057 Detector Peak Average Peak Average Peak Peak Peak Peak Emission Level

(dBV/m) 57.61 39.18 54.63 50.74 48.89 51.36 46.22 45.53 Measurement Polarization Uncertainty

(dB)

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88 H V H V H Verdict: PASS Report No: (NIE) 51929RRF.021 Page 15 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 Modulation /4-DQPSK (2DH5) 1. CHANNEL: LOWEST (2402 MHz). Spurious frequency

(GHz) 2.28810 3.10757 4.36477 4.57570 4.80390 Detector Peak Average Peak Peak Peak Peak Emission Level

(dBV/m) 55.13 51.34 47.35 50.02 45.15 44.47 Measurement Polarization Uncertainty

(dB)

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88 V V H H H 2. CHANNEL: MIDDLE (2441 MHz). Spurious frequency

(GHz) 1.87097 2.24443 3.10057 4.33490 4.87950 7.31923 Detector Peak Average Peak Average Peak Peak Peak Peak Emission Level

(dBV/m) 58.04 37.45 56.50 53.88 53.89 51.57 50.48 51.41 Measurement Polarization Uncertainty

(dB)

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88 H V V H H H 3. CHANNEL: HIGHEST (2480 MHz). Spurious frequency

(GHz) 1.86717 2.07343 3.10710 4.34003 4.96023 6.22023 Detector Peak Average Peak Average Peak Peak Peak Peak Emission Level

(dBV/m) 58.00 38.54 57.05 53.95 49.30 50.44 46.62 42.68 Measurement Polarization Uncertainty

(dB)

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88 H V H V H H Verdict: PASS Report No: (NIE) 51929RRF.021 Page 16 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 Modulation: 8-DPSK (3DH5) 1. CHANNEL: LOWEST (2402 MHz). Spurious frequency

(GHz) 2.13463 3.10897 3.50423 4.35217 4.73623 Detector Peak Average Peak Peak Peak Peak Emission Level

(dBV/m) 57.01 53.45 46.80 39.97 51.23 46.16 Measurement Polarization Uncertainty

(dB)

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88 V V V V H 2. CHANNEL: MIDDLE (2441 MHz). Spurious frequency

(GHz) 1.86977 2.19517 3.09917 3.50423 4.33723 Detector Peak Average Peak Average Peak Peak Peak Emission Level

(dBV/m) 55.51 38.12 56.77 53.91 50.12 39.40 51.69 Measurement Polarization Uncertainty

(dB)

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88 V V V V V 3. CHANNEL: HIGHEST (2480 MHz). Spurious frequency

(GHz) 1.85397 2.06950 3.11970 3.50470 4.36897 Detector Peak Average Peak Average Peak Peak Peak Emission Level

(dBV/m) 58.47 40.56 56.83 53.81 49.00 38.83 50.97 Measurement Polarization Uncertainty

(dB)

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88

< 4.88 H V V V V Verdict: PASS Report No: (NIE) 51929RRF.021 Page 17 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 FREQUENCY RANGE 30 MHz - 1 GHz:

(This plot is valid for all three channels and all modulation modes). Report No: (NIE) 51929RRF.021 Page 18 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 FREQUENCY RANGE 1 - 3 GHz:

Modulation: GFSK (DH5) CHANNEL: Lowest (2402 MHz) CHANNEL: Middle (2441 MHz) The peak above the limit is the carrier frequency. The peak above the limit is the carrier frequency. Report No: (NIE) 51929RRF.021 Page 19 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 CHANNEL: Highest (2480 MHz) The peak above the limit is the carrier frequency. Modulation: /4-DQPSK (2DH5) CHANNEL: Lowest (2402 MHz) The peak above the limit is the carrier frequency. Report No: (NIE) 51929RRF.021 Page 20 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 CHANNEL: Middle (2441 MHz) CHANNEL: Highest (2480 MHz) The peak above the limit is the carrier frequency. The peak above the limit is the carrier frequency. Report No: (NIE) 51929RRF.021 Page 21 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 Modulation: 8-DPSK (3DH5) CHANNEL: Lowest (2402 MHz) CHANNEL: Middle (2441 MHz) The peak above the limit is the carrier frequency. The peak above the limit is the carrier frequency. Report No: (NIE) 51929RRF.021 Page 22 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 CHANNEL: Highest (2480 MHz) The peak above the limit is the carrier frequency. Report No: (NIE) 51929RRF.021 Page 23 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 FREQUENCY RANGE 3 - 17 GHz:

Modulation: GFSK (DH5) CHANNEL: Lowest (2402 MHz) CHANNEL: Middle (2441 MHz) Report No: (NIE) 51929RRF.021 Page 24 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 CHANNEL: Highest (2480 MHz) Modulation: /4-DQPSK (2DH5) CHANNEL: Lowest (2402 MHz) Report No: (NIE) 51929RRF.021 Page 25 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 CHANNEL: Middle (2441 MHz) CHANNEL: Highest (2480 MHz) Report No: (NIE) 51929RRF.021 Page 26 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 Modulation: 8-DPSK (3DH5) CHANNEL: Lowest (2402 MHz) CHANNEL: Middle (2441 MHz) Report No: (NIE) 51929RRF.021 Page 27 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 CHANNEL: Highest (2480 MHz) FREQUENCY RANGE 17 - 26 GHz:

(This plot is valid for all three channels and all modulation modes). Report No: (NIE) 51929RRF.021 Page 28 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 FREQUENCY RANGE 2.31-2.39 GHz (Restricted Band 1):

CHANNEL: Lowest (2402 MHz) Modulation: GFSK (DH5) Modulation: /4-DQPSK (2DH5) Report No: (NIE) 51929RRF.021 Page 29 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 Modulation: 8-DPSK (3DH5) FREQUENCY RANGE 2.4835-2.5 GHz (Restricted Band 2):

CHANNEL: Highest (2480 MHz) Modulation: GFSK (DH5) Report No: (NIE) 51929RRF.021 Page 30 of 31 2019-09-27 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca, c/ Severo Ochoa n 2 29590 Campanillas Mlaga Espaa C.I.F. A29 507 456 Modulation: /4-DQPSK (2DH5) Modulation: 8-DPSK (3DH5) Report No: (NIE) 51929RRF.021 Page 31 of 31 2019-09-27

Panasonic Panasonic Automotive Systems Europe GmbH Headquarters Langen 28/08/19 ATTESTATION STATEMENT Declaration on similarities between variants To whom it may concern:

We, Panasonic Automotive Systems Europe GmbH, located in Robert-Bosch Str.27-29, Langen, 63225, Germany, hereby declare that the following products manufactured by Panasonic install same RF module from Murata manufacturing with model LBMA6ZZ1QD-219:

Brand name Model name FCC ID [Ic Pansonic MIB3E_MQB_BT WUQ-MIB3HBT__| 216R-MIB3HBT Panasonic MIB3E_MQB37w_BT WUQ-MIB3VBT | 216R-MIB3VBT Thus, for RF conducted measurements of MIB3E_MQB37w_BT, please refer to RF reports of MIB3E_MQB_BT. Panascnic AUTOMOTIVE anasonic Automotive Systems Europe GmbH Robert-Bosch-Str. 27-29, 63225 Langen yy: Armin Mortigny Title: Senior Manager R&D Company: Panasonic Automotive Systems Europe GmbH Telephone: +49 (0) 6103 3759 198 e-mail: armin.montigny@eu.panasonic.com Panasonic Automotive Systems Europe GmbH Robert-Bosch-StraRe 27-29 63225 Langen, Germany (Headquarters) CEO: Takeyuki Yamanaka Bankverbindung: Deutsche Bank Hamburg IBAN: DE 62 2007 0000 0090 266800 BIC: DEUTDEHH Amtsgericht Offenbach HRB-49866