FCC ID: 2A2BBWV-BWC4000 Body Worn Camera

Important Information Body Worn Camera For professional use only Model No. WV-BWC4000 WV-BWC4000E Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. The model number is abbreviated in some descriptions in this manual. PGQX2371XAJ6_WV-BWC4000_II_en.indd 1 PGQX2371XAJ6_WV-BWC4000_II_en.indd 1 2021/12/14 15:03:59 2021/12/14 15:03:59 Contents Limitation of liability ....................................................................................................................... 8 Disclaimer of warranty ................................................................................................................... 8 Preface .......................................................................................................................................... 8 About notations ............................................................................................................................. 9 About the user manuals ................................................................................................................ 9 System requirements for a PC ...................................................................................................... 9 Trademarks and registered trademarks......................................................................................... 9 Copyright ..................................................................................................................................... 10 Open Source Software ................................................................................................................ 10 Network security ......................................................................................................................... 10 Security alert when using Wireless LAN products ...................................................................... 11 Precautions ................................................................................................................................. 12 Precautions for installation .......................................................................................................... 15 Parts and functions ..................................................................................................................... 16 Indicators ..................................................................................................................................... 20 Specifications .............................................................................................................................. 25 Standard accessories .................................................................................................................. 28 Optional accessories ................................................................................................................... 28 2 PGQX2371XAJ6_WV-BWC4000_II_en.indd 2 PGQX2371XAJ6_WV-BWC4000_II_en.indd 2 2021/12/14 15:03:59 2021/12/14 15:03:59 Before attempting to connect or operate this product, please read these instructions carefully. Safety This product is a professional equipment.

: Direct current symbol EMC Radio

<WV-BWC4000>

<For U.S.A.>

This device complies with part 15 of the FCC Rules. Operation is subject to the following two con-

ditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Suppliers Declaration of conformity Trade name:

Model No.:

Responsible Party: i-PRO Americas Inc. i-PRO WV-BWC4000, WV-BWC40B1 Support Contact: 1-800-513-5417 8550 Fallbrook Drive, Suite 200 Houston, Texas 77064 FCC CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable pro-

tection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communi-

cations. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heat-

ing tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. [WV-BWC4000] has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This product has been tested and meets the FCC RF exposure guidelines when used with the com-

patible mounts supplied or designated for this product. Use of other mounts may not ensure com-

pliance with FCC RF exposure guidelines. Refer to Installation Guide on our web site for further information about with the compatible mounts. PGQX2371XAJ6_WV-BWC4000_II_en.indd 3 PGQX2371XAJ6_WV-BWC4000_II_en.indd 3 2021/12/14 15:03:59 2021/12/14 15:03:59 3 When using this product, be sure to mount it using a compatible mount and align the lens surface with the desired direction. mitter. This transmitter must not be co-located or operated in conjunction with any other antenna or trans-

Compliance with FCC requirement 15.407(c) Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinue transmission in case of either absence of information to transmit or operational failure. Frequency Tolerance: within 20 ppm

<For Canada>

CAN ICES-3(A)/NMB-3(A) This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are ini-

tiated by the MAC. These are the only ways the digital baseband portion will turn on the RF trans-

mitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automati-

cally discontinue transmission in case of either absence of information to transmit or operational failure. The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heat-

ing tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. [WV-BWC4000] has been tested and found to comply with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules. This [WV-BWC4000] has been tested and meets the ISED RF exposure rules when used with the compatible mount accessories supplied or designated for this product. Use of other accessories may not ensure compliance with ISED RF exposure rules. Refer to Installation Guide on our web site for further information about with the compatible mounts. When using this product, be sure to mount it using a compatible mount and align the lens surface with the desired direction. 4 PGQX2371XAJ6_WV-BWC4000_II_en.indd 4 PGQX2371XAJ6_WV-BWC4000_II_en.indd 4 2021/12/14 15:03:59 2021/12/14 15:03:59

<WV-BWC4000E>

<For Europe>

Declaration of Conformity (DoC) Hereby, i-PRO declares that the BWC (Body Worn Camera) is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU. Hint:

If you want to get a copy of the original DoC of our above mentioned products, please contact our web address: https://www.i-pro.com Authorised Representative: i-PRO EMEA B.V. Laarderhoogtweg 25, 1101 EB Amsterdam, Netherlands Maximum transmit power Frequency band Frequency Band(STA):

2412 MHz to 2462 MHz (1-11 ch) 16 dBm 5500 MHz to 5580 MHz (100, 102, 104, 106, 108, 110, 112, 116 ch) 12 dBm 5660 MHz to 5700 MHz (132, 134, 136, 140 ch) 12 dBm 5745 MHz to 5825 MHz (149, 151, 153, 155, 157, 159, 161, 165 ch) 8 dBm Frequency Band(AP):

2412 MHz to 2462 MHz (1-11 ch) 5745 MHz to 5825 MHz, (149, 151, 153, 155, 157, 159, 161, 165 ch) 8 dBm 16 dBm Frequency Band(Bluetooth LE):

2402 MHz to 2480 MHz 6 dBm SAR (Specific Absorption Rates) The highest SAR values for BWC (Body Worn Camera). When using this product, be sure to mount it using a compatible mount and align the lens surface with the desired direction. Highest SAR (W/kg) 0.130 PGQX2371XAJ6_WV-BWC4000_II_en.indd 5 PGQX2371XAJ6_WV-BWC4000_II_en.indd 5 2021/12/14 15:03:59 2021/12/14 15:03:59 5 Battery

<COMMON>

WARNING:

When Using the Battery

(1) Do not dismantle, open, crush, modify, shred or incinerate secondary batteries. Do not subject batteries to mechanical shock.

(2) Do not short-circuit a battery.

(3) In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.

(4) Immediately discontinue use of the battery if, while using, charging, or storing the battery, the battery is giving out an unusual smell, feels hot, changes color, changes shape or appears abnormal in any other way.

(5) Keep batteries out of the reach of children. In storage Do not expose the battery to heat or fire. Avoid storing the battery in a place exposed to direct sunlight, exposed to high temperatures such as in a vehicle under direct sunlight or in an area of low atmospheric pressure such as highland. The temperature range over which the battery can be stored is 20 C to +20 C {4 F to +68 F}

(Storage period:12 months). While Charging

(1) Do not use any charger other than that specifically provided for use with the equipment.

(2) The temperature range over which the battery can be charged is 0 C to 50 C {32 F to 122 F}. Charging the battery at temperatures outside of this range may cause the battery to become hot or to break. Battery Replacement Risk of explosion if battery is replaced by an incorrect type. When Discharging the Battery The temperature range over which the battery can be discharged is 20C to 50C {4F to 122F}. Using the battery outside of this temperature range may also harm the performance of the battery or reduce the batterys life expectancy. Safe Disposal of Lithium Ion/Polymer Battery Dispose of used Battery Pack according to local ordinances and/or regulations. Environment & recycling

<WV-BWC4000>

A lithium ion/polymer battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. 6 PGQX2371XAJ6_WV-BWC4000_II_en.indd 6 PGQX2371XAJ6_WV-BWC4000_II_en.indd 6 2021/12/14 15:03:59 2021/12/14 15:03:59

<WV-BWC4000E>

Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation. By disposing of them correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment. For more information about collection and recycling, please contact your local authority. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. Note for the battery symbol (bottom symbol) This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved. The model number and serial number of this product may be found on the surface of the unit. You should note the model number and serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft. Others Model No. Serial No. 7 PGQX2371XAJ6_WV-BWC4000_II_en.indd 7 PGQX2371XAJ6_WV-BWC4000_II_en.indd 7 2021/12/14 15:03:59 2021/12/14 15:03:59 Limitation of liability THIS PUBLICATION IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY'S RIGHT. THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S). Disclaimer of warranty IN NO EVENT SHALL i-PRO Co., Ltd. BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:

(1) ANY LOSS OR DAMAGE, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPE-

CIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PROD-

UCT;

(2) ANY INCONVENIENCE, LOSS, OR DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLI-

GENT OPERATION OF THE USER;

(3) ALL MALFUNCTIONS OR TROUBLES FROM UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE PRODUCT BY THE USER, REGARDLESS OF THE CAUSE OF THE MALFUNCTION OR TROUBLE;

(4) INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES ARE NOT DISPLAYED, DUE TO ANY REASON OR CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT;

(5) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT OF THE SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY;

(6) ANY CLAIM OR ACTION FOR DAMAGES BROUGHT BY ANY PERSON OR ORGANIZATION AS A PHOTOGRAPHED SUBJECT DUE TO VIOLATION OF PRIVACY CONCERNING A SUR-

VEILLANCE CAMERA'S PICTURE OR SAVED DATA, FOR SOME REASON (INCLUDING USE WHEN USER AUTHENTICATION ON THE AUTHENTICATION SETTING SCREEN IS SET TO OFF), BECOMING PUBLIC OR BEING USED FOR ANY PURPOSE;

(7) LOSS OF REGISTERED DATA CAUSED BY ANY FAILURE (INCLUDING INITIALIZATION OF THE PRODUCT DUE TO FORGOTTEN AUTHENTICATION INFORMATION SUCH AS A USER NAME AND PASSWORD). WV-BWC4000/WV-BWC4000E Body Worn Camera is battery-powered camera that is used to record images by being worn on a human body. It has wide lens, which enables shooting with wide angles. It is also possible to record images on the internal memory card of the camera. Preface 8 PGQX2371XAJ6_WV-BWC4000_II_en.indd 8 PGQX2371XAJ6_WV-BWC4000_II_en.indd 8 2021/12/14 15:03:59 2021/12/14 15:03:59 About notations The following notations are used when describing the functions limited for specified models. The functions without the notations are supported by all models. BWC4000 The functions or description with this notation are available when using the model WV-BWC4000 BWC4000E The functions or description with this notation are available when using the model WV-BWC4000E

* In this document, Rechargeable Li-ion Battery Pack (WV-BWC40B1/WV-BWC40B1E) is abbrevi-

ated to Battery Pack. About the user manuals There is an operating instruction for the WV-BWC4000/WV-BWC4000E as follows. Installation Guide: Explains how to install and connect devices. The instructions for mounting the optional parts to be used with BWC are included. Important Information (this document): Provides basic information about the product. The external appearance and other parts shown in this manual may differ from the actual product within the scope that will not interfere with normal use due to improvement of the product. System requirements for a PC For the system requirements for a PC, refer to Operating Instructions of UDE (Unified Digital Evi-

dence) or UEMS (Unified Evidence Management System). Trademarks and registered trademarks The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by i-PRO Co., Ltd. is under license. All other trademarks identified herein are the property of their respective owners. Covered by one or more claims of the HEVC patents listed at patentlist.accessadvance.com. 9 PGQX2371XAJ6_WV-BWC4000_II_en.indd 9 PGQX2371XAJ6_WV-BWC4000_II_en.indd 9 2021/12/14 15:03:59 2021/12/14 15:03:59 Copyright Except for open source software licensed under GPL/LGPL and so on, distributing, copying, disas-

sembling, reverse compiling and reverse engineering of the software provided with this product are all expressly prohibited. In addition, exporting any software provided with this product violating export laws is prohibited. Open Source Software This product contains open source software licensed under GPL (GNU General Public License), LGPL (GNU Lesser General Public License), etc. Customers can duplicate, distribute and modify the source code of the software under license of GPL and/or LGPL. For details concerning licensing and source code of open source software, click the Edit button on each detected BWC in the BWC4000 Configuration Tool TOP screen, click OSS License at the bottom left of Edit Configuration File, and read the displayed content. Please note that we shall not respond to any inquiries regarding the contents of the source code. Network security As you will use this unit connected to a network, your attention is called to the following security risks. A Leakage or theft of information through this unit B Use of this unit for illegal operations by persons with malicious intent C Interference with or stoppage of this unit by persons with malicious intent It is your responsibility to take precautions such as those described below to protect yourself against the above network security risks. Use this unit in a network secured by a firewall, etc. If this unit is connected to a network that includes PCs, make sure that the system is not infected by computer viruses or other malicious entities (using a regularly updated anti-virus program, anti-spyware program, etc.). 10 PGQX2371XAJ6_WV-BWC4000_II_en.indd 10 PGQX2371XAJ6_WV-BWC4000_II_en.indd 10 2021/12/14 15:03:59 2021/12/14 15:03:59 Security alert when using Wireless LAN products Wireless LAN provides with an advantage of freely connecting to the network as long as you are in the reach of radio waves. On the other hand, the radio wave reaches everywhere in the range regardless of obstacles such as walls. Therefore, if security measure is not taken, the following problems may occur:

Communication content may be compromised A malicious third party may attempt to intercept the radio wave and steal your ID, password, trans-

mitting images, etc. Breaking into a system A malicious third party may access your network without authorization and attempt the following:

Stealing personal and confidential information (Information leakage) Impersonating a specific user, communicating and spreading false information (Impersonation) Re-writing the intercepted communication content (Falsification) Sending computer viruses to corrupt data or the system (Corruption) In general, Wireless LAN is equipped with the security-related functions to avoid the above threats. Therefore, enabling the security functions will reduce the possibility of occurrence of the above. In order to reduce the occurrence of the security problem, make sure to set up the security-relating functions before using the Wireless LAN product. Due to the specification of Wireless LAN, note that there is a possibility of the security function being compromised by a special manner. In regard to the security-related settings, please contact your dealer, if necessary. We would like you to fully understand the risks of using a Wireless LAN product without taking pre-

cautions for security, and we recommend you take your own preventative measures upon your own judgment and responsibilities. If security-related problem occurs due to negligence of security measures or the inevitable reasons caused by the specifications of Wireless LAN, we shall not take any responsibility for the damages that are caused thereby. PGQX2371XAJ6_WV-BWC4000_II_en.indd 11 PGQX2371XAJ6_WV-BWC4000_II_en.indd 11 2021/12/14 15:03:59 2021/12/14 15:03:59 11 Periodic inspections shall be conducted. Rust on the metal parts or screws may cause a fall of the product resulting in injury or acci-

dents. Consult the dealer for the inspections. Turn the power off when cleaning this pro-

duct. Failure to observe this may cause electrical shock. Stop the operation immediately when something is wrong with this product. When smoke goes up from the product, the smell of smoke comes from the product, or the exterior of the product has deteriorated, con-

tinued use will cause a fire or fall of the product resulting in injury, or damage to the product. In this case, turn the power off immediately and contact qualified service personnel for service. Precautions Turn off the power in air planes Failure to observe this may interfere with the safety of the flight. Do not bring the camera near medical devices (Do not bring it into an operating room, ICU, or CCU, etc.) The waveform emitted from the device may affect the medical devices. It may cause mal-

function resulting in an accident. Refer installation work to the dealer. Installation work requires technique and experi-

ence. Failure to observe this may cause injury, or damage to the product. Be sure to consult the dealer. Do not use this product in an inflammable atmosphere Failure to observe this may cause an explosion resulting in injury. Do not block the ventilation openings. Failure to observe this may cause fire since blocking the ventilation openings can raise the temperature inside the product. Do not strike or give a strong shock to this product Failure to observe this may cause fire or injury. Do not insert any foreign objects Fire or electrical shock may be caused if water or any foreign objects, such as metal objects, enter inside the unit. Turn the power off immediately and contact qualified service personnel for service. Do not attempt to disassemble or modify this product Failure to observe this may cause fire or electric shock. Consult the dealer for the repair or inspections. 12 PGQX2371XAJ6_WV-BWC4000_II_en.indd 12 PGQX2371XAJ6_WV-BWC4000_II_en.indd 12 2021/12/14 15:03:59 2021/12/14 15:03:59 Do not touch the lens with your bare hands. A dirty lens causes deterioration of picture quality. In case of adhesion any dirt or other unwanted substances, please wipe it with a lens cleaning paper. When an error is detected, this product will restart automatically. This product will be inoperable for around 40 second after the restart just as when the power is turned on. Do not touch the bottom terminal of the BWC. Failure to observe this may cause poor con-

tact. Periodically images on the screen appear to be distorted When the camera is installed in a location where it is subject to small vibrations (for exam-

ple, when it is installed near devices that vibrate), images may appear distorted and stretched lengthways. This phenomenon is a characteristic of image pickup devices that use MOS sensors and is caused by the relationship between the peri-

odic movements of the camera and the timing that the image sensor reads images. This is not a problem with the camera. About internal memory card The internal memory card is consumables:

Replace it in accordance with their operating lifetimes. It's operating lifetimes vary depending on the usage environment and conditions. Make sure to contact a service engineer when replacing the internal memory card.

[Precautions for use]

To keep on using with stable performance Do not use this product in hot and humid con-

ditions for a long time. Failure to observe this causes component deg-

radation resulting in life shortening of this prod-

uct. Do not expose this product to direct heat sources such as a heater. Handle this product with care. Do not drop this product, nor apply shock or vibration to the product. Failure to observe this may cause trouble. If a strong shock or vibration is applied to the enclosure, it may cause damage to this prod-

uct. About the battery This product consists of a camera section and Battery Pack section. Do not leave the battery in environments where it may be exposed to excessive heat from sunlight or fire, such as on the dashboard of a vehicle. The capacity of the battery is reduced each time it is used. In particular, recharging or using the battery in high-temperature locations increases deterioration. Observe the following precautions when replacing the battery. Be sure to use the dedicated Recharge-

able Li-ion Battery Pack (WV-BWC40B1/

WV-BWC40B1E). Check that the camera surfaces are not wet before removing the battery. The internal terminals are visible when the battery is removed. Take care not to get them wet. If the internal terminals appear dirty when the battery is removed, wipe them clean with a dry cloth. Take care not to drop the Battery Pack. When installing the battery, take care that foreign objects are not trapped in the ter-

minals. When installing the battery, check that the left and right battery hooks are fixed prop-

erly. PGQX2371XAJ6_WV-BWC4000_II_en.indd 13 PGQX2371XAJ6_WV-BWC4000_II_en.indd 13 2021/12/14 15:03:59 2021/12/14 15:03:59 13 About the CMOS image sensor When continuously shooting a bright light source such as a spotlight, the color filter of the CMOS image sensor may become deteriorated and this may cause discolor-

ation. Even when changing the fixed shooting direction after continuously shooting a spotlight for a certain period, the discolor-

ation may remain. When shooting fast-moving subjects or objects crossing the shooting area may look to be bending askew. About the built-in microphone If moisture attach to the peristome of buil-

tin microphone, the volume may decrease. Please leave it to air dry sufficiently before use. Microphones are placed in four locations around the front center lens and Rec. but-

ton of this product. Do not block the microphone holes with tape, etc. When cleaning the peristome of built-in microphone, do not use any sharp-ended object to stab it. Doing so may result in failure. Cleaning this product body Be sure to turn off the power before cleaning. Failure to observe this may cause injury. Do not use benzine, thinner, alcohol, or any other types of solvents or detergents. Otherwise, it may cause discoloration. When using a chemical cloth for cleaning, read the caution provided with the chemical cloth product. Do not loozen or remove screws unless instructed to do so in the product documenta-

tion. Cleaning the lens Use a lens cleaning paper (used to clean cam-

era lenses or lenses of spectacles). When using solvent, use an alcohols solvent and do not use a thinner or a glass cleaner. AVC Patent Portfolio License THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (AVC VIDEO) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PER-

SONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM Equipment classification and power source indication label Refer to the indication label on the rear side of this unit for the equipment classification, power source, and other information. Product disposal/transfer Data saved on this product or a storage device used with this product may lead to personal information leakage. When it is necessary to dispose or give this product to someone, even when for repair, make sure that there is no data on this prod-

uct. Security Do not use the user name and password already used for other camera or device. Keep the user name and password secure and make best efforts to prevent third parties from acquiring them. Do not allow multiple users to share one set of user name and password. 14 PGQX2371XAJ6_WV-BWC4000_II_en.indd 14 PGQX2371XAJ6_WV-BWC4000_II_en.indd 14 2021/12/14 15:03:59 2021/12/14 15:03:59 Precautions for installation i-PRO Co., Ltd. assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation. For information about the installation tasks, refer to Installation Guide on our web site. Radio disturbance When this product is used near TV/radio antenna, strong electric field or magnetic field

(near a motor, a transformer or a power line), images may be distorted and noise may be produced. Do not place this product in the following places:

Locations where a chemical agent is used such as a swimming pool Locations subject to moisture or oil smoke such as a kitchen Locations that have a specific environment that is subject to an inflammable atmo-

sphere or solvents Locations where a radiation, an X-ray, a strong radio wave or a strong magnetic field is generated Locations near coasts directly subjected to sea breezes, or locations subject to corro-

sive gases such as from hot springs, vol-

canic regions, etc. Locations where the temperature is not within the specified range (20C to +50C

{4 F to +122 F}) Locations subject to condensation as the result of severe changes in temperature (In case of using the product in such loca-

tions, the lens may become foggy or con-

densation may be caused on the lens.) Sulfurization caused by rubber products Do not place the product near rubber products

(packing, rubber feet, etc.) that contain sulfur. There is a risk that sulfur components in rubber products may cause electrical parts and termi-

nals, etc. to become sulfurized and corrode. PGQX2371XAJ6_WV-BWC4000_II_en.indd 15 PGQX2371XAJ6_WV-BWC4000_II_en.indd 15 2021/12/14 15:03:59 2021/12/14 15:03:59 15 Parts and functions

[3] Mute LED

[4] Display button (DISP.)

[5] Audio mute button (MUTE)

[6] Multi function button (FUNC) Battery release button

(Both side)

[7] Rec. button

[8] Bottom terminal

[9] Mount hook Name plate for camera

[10] Power SW Camera

[11] Battery Pack

[1] LCD display

[2] Rec. LED Lens Mic. x4 places Battery release button (Both side) Push Battery release but-

tons at the same time Name plate for battery Important:

Be sure to turn off the power switch before removing the Battery Pack. 16 PGQX2371XAJ6_WV-BWC4000_II_en.indd 16 PGQX2371XAJ6_WV-BWC4000_II_en.indd 16 2021/12/14 15:04:00 2021/12/14 15:04:00

[1] LCD display The operating condition of the camera or a remaining amount of the battery is displayed. The fol-

lowing describes the display layout. Refer to page 20 for further information about details of the display. Pict area Message area

[2] Rec. LED / [3] Mute LED Rec. LED and Mute LED not only indicate the recording status and the mute status respectively but also the following statuses of the camera. During the startup process Blink orange Rec. LED Mute LED Blink orange During recording Off (Factory shippment) Audio mute Lights orange During charging Lights green Charging completed Blink orange Charging error During firmware version-up Blink orange Blink orange During the shutdown pro-

cess Off Lights orange Blink orange Blink orange 0.5sec:On / 0.5sec:Off Displays STARTING on the LCD*

Can be changed to Off Lights red by BWC4000 Configuration Tool. 0.5sec:On / 0.5sec:Off 0.5sec:On / 0.5sec:Off 0.5sec:On / 0.5sec:Off Displays SHUTDOWN on the LCD PGQX2371XAJ6_WV-BWC4000_II_en.indd 17 PGQX2371XAJ6_WV-BWC4000_II_en.indd 17 2021/12/14 15:04:00 2021/12/14 15:04:00 17

[4] Display button The content to be displayed on the LCD can be switched by pressing the Display button. Refer to page 20 for further information about details of the menu. 1. Displays the current execution status. 2. Displays the Officer ID registered in BWC.

* Displays EMPTY in the factory default state. 3. Displays the Vehicle ID registered in BWC.

* Displays EMPTY in the factory default state. 4. Displays the remaining capacity of the internal memory. 5. Displays the time and date in format of MM/DD/YY hh:mmAM. 6. Displays the WLAN (SSID)/AP of the connection target. 7. Display the connection status of holster sensors.*1 8. Displays the Classify given at the time when the Multi function button is pressed.

*1 H1: Holster Sensor 1 H2: Holster Sensor 2 Y: Connected N: Not connected

-: Not Registered Note:

If 6. SSID mark, 7 Holster Sensors mark and 8. Traffic mark are not set beforehand in BWC4000 Configuration Tool, they will be skipped without being displayed. When the Display button is pressed first, the backlight will light. When the Display button is pressed again or more times after that, the above menus will be displayed and switched (tog-

gled).

[5] Audio mute button Starts/stops the audio mute. By holding down the button (for around 5 seconds), the covert mode* can be turned on/off. Note:

Covert mode: A function that temporarily turns off the LED and LCD backlight. To use the convert mode, you need to set it beforehand using BWC4000 Configuration Tool.

[6] Multi function button A function can be assigned by setting. Currently, Classify function is assigned. The camera has a Multi function button to select the incidents type and also it has button to add the incidents type to the video data.

* Classify: Identifier for searching for or classify cases

* To assign a different function to the FUNC button, use BWC4000 Configuration Tool. 18 PGQX2371XAJ6_WV-BWC4000_II_en.indd 18 PGQX2371XAJ6_WV-BWC4000_II_en.indd 18 2021/12/14 15:04:00 2021/12/14 15:04:00

[7] Rec. button Starts/stops video/audio recording. To stop the record operation, press and hold the Record button for 2 seconds (default) or more depending on the setting (2, 3, or 5 seconds).

* Use BWC4000 Configuration Tool to change the hold time. Note:

The buttons other than the Display button are inoperable when the camera is inserted in the Multi-Dock Charger/Single Dock Charger while powered on.

[8] Bottom terminal A terminal to be used when charging the camera by setting onto Multi-Dock Charger (WV-BW40D8:

option) or Single Dock Charger (WV-BWC40D1: option). Also, it is used when transferring recorded data to UDE (Unified Digital Evidence), UEMS (Unified Evidence Management System) or BWC4000 Configuration Tool.

[9] Mount hook When using any of the following mounting part, use this Mount hook to mount on it. ARB-BWC3MNT-MAG Magnet Mount Kit:

MOLLE Vest Dock:

ARB-BWC3MNT-MOLLE Anti-tilt Dock with Spring Clamp: ARB-BWC3MNT-CLAMP ARB-BWC3BLTCLIP Leather Belt Clip:

Leather Belt Loop:

ARB-BWC3BLTLOOP Tag on garment/vest mount dock: ARB-BWCVESTMNT

[10] Power SW Control power On/Off Power SW (Off) Power SW (On)

[11] Battery Pack A part from the Battery Pack included in the product package, additional Battery Pack is available for replacement. It can be used as spare battery when the battery of the camera is in an insufficient charge state. Rechargeable Li-ion Battery Pack (For North America): WV-BWC40B1 Rechargeable Li-ion Battery Pack (For Europe):

WV-BWC40B1E Important:

Be sure to turn off the power switch before removing the Battery Pack. 19 PGQX2371XAJ6_WV-BWC4000_II_en.indd 19 PGQX2371XAJ6_WV-BWC4000_II_en.indd 19 2021/12/14 15:04:00 2021/12/14 15:04:00 Indicators F A B C D E H G I Upper part: Pict area Lower part: Message area

* STARTING or SHUTDOWN will be displayed on the whole area of the LCD irrespective of the above areas at the time of startup and shutdown. The following are descriptions about the display content and about how to change the display content. Refer to the Installation Guide on our support web site for the setting content and details about them.

[1] Pict area A WLAN Displays the icons to indicate the status of the connection using the IP interface. LAN Established connection with UDE, UEMS or BWC4000 Configura-

tion Tool Wireless LAN (STA) ST1: Established connection with VPU/CTB ST2: Established connection with UDE or UEMS Wireless LAN (AP) Established connection with a smart phone. B Bluetooth LE Displays the icons to indicate the status of the connection using the Bluetooth interface. Light: Established Bluetooth LINK connection Blink: During the search process None: No LINK or Bluetooth setting is off Searching LINK C Streaming Displays the streaming status. Light: Streaming is on None: Streaming is off or streaming setting is off On Off D Internal memory Displays the status of the internal memory. Empty 50 %

20 %

Full Displays that an error occurred in the internal memory or the internal memory is damaged. Please contact your dealer. Blink Blink Blink 20 PGQX2371XAJ6_WV-BWC4000_II_en.indd 20 PGQX2371XAJ6_WV-BWC4000_II_en.indd 20 2021/12/14 15:04:00 2021/12/14 15:04:00 E Battery Displays the remaining battery status. Empty 5 % 15 %

50 %

80 %

Full Being used Being charged F Holster Sensor Displays the icons to indicate the connection status of holster sensors. Icon Status Holster IDs of connected holster sensors are displayed on the right-hand side in numbers. Lights when holster sensor related settings are On and all registered holster sensors are connected. Holster IDs of connected holster sensors are displayed on the right-hand side in numbers. Blinks when holster sensor related settings are searched by any registered holster sensor. When all of the holsters are not connected and holsters are not searched. Bluetooth setting is Off. Holster 1/Holster 2 holster sensor settings are Off or holsters are not regis-

tered. None

[2] Message area

<How to use the Display button>

A Change the LCD screen Press the Display button. First time Second time and later Toggles the display content in the message area. Lights the backlight of the LCD. (The backlight will light for 5 seconds.) B Display further details of the content displayed on the LCD Hold down the Display button for about 3 seconds. When a message has the mark on the right side of the message area, displaying of further information (child content) is available. C Return to the original display content Hold down the Display button for about 3 seconds. By pressing the Display button when the mark is displayed on the left side of the message area (child content), the display content will return to the original display content (parent content). Hold down the Display button Parent content (toggle menu) Child content PGQX2371XAJ6_WV-BWC4000_II_en.indd 21 PGQX2371XAJ6_WV-BWC4000_II_en.indd 21 2021/12/14 15:04:00 2021/12/14 15:04:00 21

<Action notification>

When an event occurred during operation, content of the event will temporarily be displayed. The event content will return to the original menu after a certain period of time. Example:

BWC startup Only STARTING is displayed. Recording start:

REC START is displayed Recording stop:

REC STOP is displayed Application connection notification:

When UDE is connected:

CONN:UDE

* Display example UEMS CONN:UEMS, Smartphone CONN:SMT, BWC4000 Configuration Tool CONN:WAP

<Error notification>

When an error occurred, content of the error will be displayed in the message area and the back-

light will also light. Example:

No remaining capacity in the internal memory:

! MEM FULL is displayed The battery is in an insufficient charge state:

! BATT LOW is displayed Note:

The ! BATT LOW indication can be turned off by pressing the Display button on the camera twice. The first time lights the backlight of the LCD again. The second time returns the LCD indication to READY.

<Status display>

Displays the status of the camera. Example:

During recording:

Less than 10 hours:

REC9:59:59 More than 10 hours:

RECORDING LED/LCD off mode:

COVERT 22 PGQX2371XAJ6_WV-BWC4000_II_en.indd 22 PGQX2371XAJ6_WV-BWC4000_II_en.indd 22 2021/12/14 15:04:01 2021/12/14 15:04:01

<Other display information>

QR code reading display: QR CODE Displays when reading of QR code started. Upgrade display: F/W UPGRAD Displays when upgrading of firmware started at the time of startup. Data recovery display: RECOVERING Displays when the file system is being recovered. Safe mode display: SAFE-MODE Displays when it is in the safe mode. Battery authentication error display: BATT BAD Displays when a battery authentication error occurred. System reset: RESTARTING Displays when the system is being restarted by the system reset. PGQX2371XAJ6_WV-BWC4000_II_en.indd 23 PGQX2371XAJ6_WV-BWC4000_II_en.indd 23 2021/12/14 15:04:01 2021/12/14 15:04:01 23

<Maintenance information>

To display maintenance information, hold down the Display button for 5 seconds when the Time and date screen (toggled menu) is being displayed. It is possible to display the following contents on the maintenance information display screen. Each time when the Display button is pressed, the display content will be switched. Each display content will be switched from Title display to Value display in order. Title display Title display Value display VERSION Firmware version in operation IP-LAN Displays the IP address of the LAN port Subnet-LAN Displays the subnet mask of the LAN port IPWLAN Displays the IP address of the wireless LAN port SubnetWLAN Displays the subnet mask of the wireless LAN port CFG UPGRAD Time and date of the latest setting update CFG DL Time and date when the latest setting is downloaded GPS GPS reception status CONNECT Displays the connected application. HOLSTER Displays the connection status of holster sensors.*1

*1 0: Holster sensor settings are Off 1: Holster sensor ready for connection (SDC/MDC is connected to, etc.) 2: Holster sensor connected and holster status is Holstered 3: Holster sensor connected and holster status is Unholstered 6: Holster sensor connected and holster status is Unknown 7: Holster sensor connected and holster status is not able to be obtained 8: Holster sensor not connected 9: Holster sensor not registered Note:

To return from the maintenance information to the previous Time and date screen (toggled menu), press and hold the Display button for about 5 seconds from the Title display or Value Battery Pack screen. 24 PGQX2371XAJ6_WV-BWC4000_II_en.indd 24 PGQX2371XAJ6_WV-BWC4000_II_en.indd 24 2021/12/14 15:04:01 2021/12/14 15:04:01 Specifications Basic Power source:

Rechargeable lithium ion battery: 2670 mAh or more

* Battery can be charged using Multi-Dock Charger (WV-BWC40D8), or Single Dock Charger (WV-BWC40D1) DC 3.6 V Power consumption:

Continuous operating time*1: About 12 hours Full-charging term*2:

Operating environment:

Ambient operating temperature:

Ambient operating humidity:

About 4 hours (100 %) Storage environment:

Built-in microphone:

Internal memory:

Terminals:

Waterproof*3:

On-vehicle support:

Dimensions:

Mass:

Finish:

20 C to +50 C {4 F to +122 F}

10 % to 100 %

Storage temperature: 20 C to +60 C {4 F to +140 F}

Storage humidity: 10 % to 95 % (no condensation) Nondirectional electret condenser microphone x4 128 GB Bottom terminal for Multi-Dock Charger or Single Dock Charger IP67/IP66 (IEC 60529) Compliant with MIL-STD-810H 70 mm (W) x 86 mm (H) x 24 mm (D)

{2-3/4 inches (W) x 3-3/8 inches (H) x 15/16 inches (D)}

(Excluding projections) Approx. 170 g {0.38 lbs}

Main body: Polycarbonate resin, Lusterless black

*1 The measurement result is based on our original standard. It varies depending on BLE / Wire-

less LAN / GPS wave condition, Recording time, LCD brightness and the operating environ-

ment.

*2 When left charging at room temperature (25C) using Multi-Dock Charger. The battery charg-

ing time varies depending on the operating environment and the operating condition of BWC. In a state that the Battery Pack is correctly installed.

*3 PGQX2371XAJ6_WV-BWC4000_II_en.indd 25 PGQX2371XAJ6_WV-BWC4000_II_en.indd 25 2021/12/14 15:04:01 2021/12/14 15:04:01 25 Camera Image sensor:

Effective pixels:

Scanning area:

Scanning system:

Minimum illumination:

Gain (AGC):

Adaptive black stretch:

Flickerless setting:

Approx. 1/3 type CMOS image sensor Approx. 2.4 megapixels

[16:9 mode]

5.28 mm (H)2.97 mm (V) {7/32 inches (H) 1/8 inches (V)}

[4:3 mode]

4.40 mm (H)3.30 mm (V) {3/16 inches (H) 1/8 inches (V)}

Progressive Color : 0.08 lx {0.0074 footcandle}

BW : 0.07 lx {0.0065 footcandle}

Off/ Low/ Mid./ High On / Off

(F2.0, AGC: HIGH)

(F2.0, AGC: HIGH) BWC4000 Flickerless On(60Hz) BWC4000E Flickerless On(50Hz) Color/BW:

White balance:

Stabilizer:

Auto/Off Auto On/Off On: Applies shake correction to both recording data and live distribution data inside the camera Off: Sends data of gyro/G sensor as meta data and corrects on the viewer side The level can be set in the range of 1 to 10. The level can be set in the range of 1 to 10. Sharpness:

Brightness:

Lens Zoom ratio:

Focal length:

Maximum aperture ratio:

Focus range:

Aperture range:

Angular field of view:

x1 Optical zoom 2.1 mm {3/32 inches}

1:2.0 0.3 m {11-13/16 inches}

Fixed (F2.0)

[16:9 mode]

Diagonal: 157 Horizontal: 137 Vertical: 79

[4:3 mode]

Diagonal: 143 Horizontal: 115 Vertical: 87 26 PGQX2371XAJ6_WV-BWC4000_II_en.indd 26 PGQX2371XAJ6_WV-BWC4000_II_en.indd 26 2021/12/14 15:04:01 2021/12/14 15:04:01 Others Wireless LAN Communication Standard:

Access mode:

Frequency Band(STA):

IEEE802.11 a/b/g/n/ac Infrastructure mode BWC4000 2.4 GHz band 5 GHz band 2412 MHz to 2462 MHz (1-11 ch) 5280 MHz to 5320 MHz (56, 60, 62, 64 ch) 5500 MHz to 5580 MHz (100, 102, 104, 106, 108, 110, 112, 116 ch) 5660 MHz to 5720 MHz (132, 134, 136, 138, 140, 142, 144 ch) 5745 MHz to 5825 MHz (149, 151, 153, 155, 157, 159, 161, 165 ch) BWC4000E 2.4 GHz band 5 GHz band 2412 MHz to 2462 MHz (1-11 ch) 5500 MHz to 5580 MHz (100, 102, 104, 106, 108, 110, 112, 116 ch) 5660 MHz to 5700 MHz (132, 134, 136, 140 ch) 5745 MHz to 5825 MHz (149, 151, 153, 155, 157, 159, 161, 165 ch) 2412 MHz to 2462 MHz (1-11 ch) 5 GHz band 5745 MHz to 5825 MHz, (149, 151, 153, 155, 157, 159, 161, 165 ch) Frequency Band(AP):

2.4 GHz band Security:

WPA2-PSK (AES) Bluetooth Bluetooth standard:

Frequency band:

Support profile:

Modulation system:

Bluetooth Low Energy (Ver4.1) 2402 MHz to 2480 MHz GATT (Generic attribute profile) Frequency Hopping Spread Spectrum (FH-SS) GPS (Global Positioning System) Receive frequency:

1.57542 GHz (C/A code) PGQX2371XAJ6_WV-BWC4000_II_en.indd 27 PGQX2371XAJ6_WV-BWC4000_II_en.indd 27 2021/12/14 15:04:01 2021/12/14 15:04:01 27 Standard accessories Important Information (this document) ...............................................1 set Optional accessories Single Dock Charger:

Multi-Dock Charger:

Rechargeable Li-ion Battery Pack BWC4000 :

Rechargeable Li-ion Battery Pack BWC4000E :

Single Battery Charger:

Multi-Battery Charger:

WV-BWC40D1 WV-BWC40D8 WV-BWC40B1 WV-BWC40B1E WV-BWC40C1 WV-BWC40C8 For U.S. and Canada:

For Europe and other countries:

i-PRO Americas Inc. https://www.i-pro.com/

i-PRO Co., Ltd. Fukuoka, Japan https://www.i-pro.com/

Authorised Representative in EU:

i-PRO EMEA B.V. Laarderhoogtweg 25, 1101 EB Amsterdam, Netherlands i-PRO Co., Ltd. 2022 PaJe0820-2042 Printed in Japan PGQX2371XAJ6_WV-BWC4000_II_en.indd 28 PGQX2371XAJ6_WV-BWC4000_II_en.indd 28 2021/12/14 15:04:01 2021/12/14 15:04:01

Body Worn Camera:

MARKINGS Markings is shown on the back side of the unit. Note: FCC/IC ID & FCC 15 statement is described in the product manual

Panasonic i-PRO Sensing Solutions Co., Ltd. 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531 Japan Letter of Authorization Date: February 10, 2022 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC ID :2A2BBWV-BWC4000 Applicant :Panasonic i-PRO Sensing Solutions Co., Ltd. To whom it may concern:

We, the undersigned, hereby authorize Rie Fujiwara of Consumer, Medical & Information Technologies Division, UL Japan, Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Japan, Inc. on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. The application for the subject equipment has not been submitted to another TCB for certification. Sincerely Yours, Yusuke Nakamura Panasonic i-PRO Sensing Solutions Co., Ltd.

Panasonic i-PRO Sensing Solutions Co., Ltd. 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531 Japan Declaration Letter of Changing ID February 10, 2022 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 We Panasonic i-PRO Sensing Solutions Co., Ltd., are requesting a change of ID grant for original FCC ID: ACJ9TAWV-BWC4000 and we will be identifying it with FCC ID: 2A2BBWV-BWC4000. The equipment is electrically identical and the new product version is identical to the certified product. The module manufacturer is the same. The original test results are applicable and representative of this changed device. Only FCC ID is different. Meanwhile we submit the following documents. The documents on file with Federal Communications Commission from the original certification remain unchanged and continue to be valid except for these documents. Test Report External Photo Internal Photo User Manual Label drawing/ location Block Diagram Specification Schematic Diagram Parts List Thank you for your attention to this matter. Sincerely, Yusuke Nakamura Panasonic i-PRO Sensing Solutions Co., Ltd.

UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 Re: Change of Identification Application Request for Change in ID March 21, 2022 PSSD-22-F002 From: Panasonic Corporation of North America Model WV-BWC4000 under FCC ID: ACJ9TAWV-BWC4000 To: Panasonic i-PRO Sensing Solutions Co., Ltd. Model WV-BWC4000 under FCC ID: 2A2BBWV-BWC4000 To whom it may concern:

The following product was acquired by Panasonic i-PRO Sensing Solutions Co, Ltd. Model WV-BWC4000 with FCC ID: ACJ9TAWV-BWC4000 which was granted on 09/23/2020 As a result, we, Panasonic Corporation of North America, hereby permit, Panasonic i-PRO Sensing Solutions Co., Ltd. to apply for Multiple Listing Application for Body Worn Camera Model WV-BWC4000 in accordance with 2.933. The documents currently on file with FCC remain unchanged from original certification. We permit FCC to use these documents to facilitate the Change of ID Request by Panasonic i-PRO Sensing Solutions Co., Ltd. Thank you for your attention in this matter. Authorized by, Ben Botros Manager Regulatory & Compliance Panasonic Corporation of North America Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / Ben.Botros@us.panasonic.com

Panasonic i-PRO Sensing Solutions Co., Ltd. 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531 Japan Request for Short-Term Confidentiality Date: February 10, 2022 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC ID : 2A2BBWV-BWC4000 Applicant : Panasonic i-PRO Sensing Solutions Co., Ltd. To whom it may concern:

Please be advised that the following information is to be held in confidence for 90 days from the date of the Grant of Equipment Authorization and behalf of us, referring to the FCC rules 0.457 and 0.459:

User Manual External Photos The application contains technical information, which we deem to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Sincerely, ____________________________________ Yusuke Nakamura Panasonic i-PRO Sensing Solutions Co., Ltd.

Panasonic i-PRO Sensing Solutions Co., Ltd. 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531 Japan Special Power of Attorney To whom it may concern:

I, Katsumi Yano of Panasonic i-PRO Sensing Solutions Co., Ltd. hereby appoint Yusuke Nakamura of Panasonic i-PRO Sensing Solutions Co., Ltd. to represent me to act on my behalf to do any and all of the following:

Sign the following documents on my behalf and apply to FCC for the products

- Letter of agency and anti-drug

- Confidentiality cover letters

- Any other application document that requires a signature by grantee. The rights, powers and authority in fact to exercise any and all of the rights and powers herein granted shall commence and be in full force and effective from January 16, 2022 unless specifically extended or terminated by either party. Date: January 16, 2022 Place: Japan Katsumi Yano Panasonic i-PRO Sensing Solutions Co., Ltd.