all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
15 UserMan-Rev1.2.2 | Users Manual | 798.06 KiB | ||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | ID Label/Location Info | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | Test Setup Photos | |||||||
1 | Test Report | |||||||
1 | Operational Description | |||||||
1 | RF Exposure Info | |||||||
1 | Attestation Statements |
1 | 15 UserMan-Rev1.2.2 | Users Manual | 798.06 KiB |
CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE No. DS-172x-2400-102 PAGE REV. 1.2 1 of 29 17.07.2012 Specification for Production Applicant / Manufacturer Hardware Applicant / Manufacturer Software Software Version Panasonic Electronic Devices Europe GmbH Zeppelinstrasse 19 21337 Lneburg Germany Please refer to chapter 22 / 22.1 Information regarding Software Versions Please refer to chapter 22 / 22.1 Information regarding Software Versions By purchase of any of products described in this document the customer accepts the document's validity and declares their agreement and understanding of its contents and recommendations. Panasonic reserves the right to make changes as required without notification. HIGH FREQUENCY PRODUCTS DIVISION PANASONIC ELECTRONIC DEVICES Module Business EUROPE GmbH APPROVED genehmigt CHECKED geprft DESIGNED erstellt CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE No. DS-172x-2400-102 PAGE REV. 1.2 2 of 29 17.07.2012 TABLE OF CONTENTS 1. 2. 3. 4. 5. 6. 7. Scope of this Document..................................................................................................4 Difference PAN1720 / PAN1721.....................................................................................4 Key Features...................................................................................................................4 Bluetooth Low Energy.....................................................................................................5 Applications for the Module.............................................................................................5 Description for the Module ..............................................................................................5 Detailed Description........................................................................................................6 7.1. PAN172x Terminal Layout.....................................................................................6 Bluetooth Features..........................................................................................................8 8. 9. Block Diagram.................................................................................................................8 10. Test Conditions ...............................................................................................................9 11. General Device Requirements and Operation ................................................................9 11.1. Absolute Maximum Ratings ...................................................................................9 11.2. Recommended Operating Conditions....................................................................9 11.3. Current Consumption...........................................................................................10 12. Bluetooth RF Performance............................................................................................11 12.1. Bluetooth Characteristics.....................................................................................11 13. Soldering Temperature-Time Profile (for reflow soldering) ...........................................12 13.1. For lead solder.....................................................................................................12 13.2. For leadfree solder...............................................................................................12 14. Module Dimension ........................................................................................................13 15. PAN172x FootPrint of the Module.................................................................................14 16. Case Marking................................................................................................................15 16.1. Example for Marking............................................................................................15 16.2. Marking Definition ................................................................................................15 17. Mechanical Requirements.............................................................................................16 18. Development of Applications.........................................................................................16 19. Reliability Tests.............................................................................................................16 20. Cautions........................................................................................................................16 20.1. Design Notes .......................................................................................................16 20.2. Installation Notes .................................................................................................17 20.3. Usage Conditions Notes ......................................................................................17 20.4. Storage Notes......................................................................................................18 20.5. Safety Cautions ...................................................................................................18 20.6. Other cautions .....................................................................................................18 21. Packaging .....................................................................................................................20 21.1. Tape Dimension...................................................................................................20 21.2. Packing in Tape ...................................................................................................20 21.3. Component direction............................................................................................21 PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pideu.pansonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE No. DS-172x-2400-102 PAGE REV. 1.2 3 of 29 17.07.2012 21.4. Reel Dimension ...................................................................................................21 21.5. Label for Package................................................................................................22 21.6. Total Package......................................................................................................22 22. Ordering Information .....................................................................................................23 22.1. Information regarding Software Versions ............................................................23 23. RoHS Declaration .........................................................................................................24 24. Data Sheet Status.........................................................................................................25 25. History for this Document..............................................................................................25 26. Related Documents.......................................................................................................25 27. General Information ......................................................................................................26 28. Regulatory Information..................................................................................................26 28.1. FCC Notice ..........................................................................................................26 28.2. Caution ................................................................................................................26 28.3. Labeling Requirements........................................................................................27 28.4. Antenna Warning .................................................................................................27 28.5. Approved Antenna List ........................................................................................27 28.6. RF Exposure PAN172x........................................................................................27 Industry Canada Certification........................................................................................28 29.1. IC Notice ..............................................................................................................28 29.2. Labeling Requirements........................................................................................28 30. European R&TTE Declaration of Conformity ................................................................28 31. Life Support Policy ........................................................................................................29 29. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pideu.pansonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE No. DS-172x-2400-102 PAGE REV. 1.2 4 of 29 17.07.2012 1. SCOPE OF THIS DOCUMENT This product specification applies to Panasonics, Class 2, Bluetooth1 low energy single mode module, series number: PAN1720 (CC2540 from Texas Instruments) and PAN1721 (CC2541 from Texas Instruments). Different memory versions of the PAN172x are available. 2. DIFFERENCE PAN1720 / PAN1721 Difference PAN1720 and PAN1721 is the IC from Texas Instruments only. Both are refered to PAN172x in this document. The CC2541 is pin-compatible with the CC2540 in the 6-mm 6-mm QFN40 package, if the USB is not used on the CC2540 and the I2C/extra I/O is not used on the CC2541. Compared to the CC2540, the CC2541 provides lower RF current consumption. The CC2541 does not have the USB interface of the CC2540, and provides lower maximum output power in TX mode. The CC2541 also adds a HW I2C interface. More detailed differences regarding the IC, which have an impact on the module can be seen in the datasheets from Texas Instruments. CC2540 from Texas Instruments CC2541 from Texas Instruments KEY FEATURES 3. Bluetooth Low Energy Single Mode 4.0 Surface mount type 15.6 x 8.7 x 1.8 mm Up to 4.0 dBm Tx power (typical) with transmit power control High sensitivity (-94 dBm typ.) Texas Instruments CC2540 Single Chip BLE Solution inside High performance low power 8051 Microcontroller core No external components needed Fast Connection Setup Two powerful USARTs USB direct support Powerful five channel DMA Latest Profiles included e.g. Battery Monitor and Temperature sensor Manufactured in conformance with RoHS Internal crystal oscillator (26MHz) Internal 32khz crystal oscillator for Sleep Timer Integrated shielding to resist EMI 1 Bluetooth is a registered trademark of the Bluetooth Special Interest Group. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pideu.pansonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE No. DS-172x-2400-102 PAGE REV. 1.2 5 of 29 17.07.2012 BLUETOOTH LOW ENERGY Bluetooth Low Energy (BLE), part of Bluetooth Ver. 4.0, specifies two types of implementation: Single mode and dual mode. Single mode chips implement the low energy specification and consume just a fraction of the power of classic Bluetooth, allowing the short-range wireless standard to extend to coin cell battery applications for the first time. Dual mode chips combine low energy with the power of classic Bluetooth and are likely to become a de facto feature in almost all new Bluetooth enabled cellular phones and computers. Single mode Bluetooth 4.0 Low Energy is not backwards compatible with previous Bluetooth standards. Dual mode Bluetooth 4.0 Low Energy is backwards compatible but is not practical for low power devices but targeted to gateway products APPLICATIONS FOR THE MODULE All Embedded Wireless Applications Industrial Control Access Points Medical Scanners Wireless Sensors Low Power Proximity Smart Phone Access Points Temperature Wellness Sports DESCRIPTION FOR THE MODULE 9. AN172x AN172x AN172x AN172x is a short-range Class 2 BLE single mode module for implementing Bluetooth is a cost-effective, low-power, true system-on-chip (SoC) for Bluetooth low energy The P functionality into various electronic devices. A block diagram can be found in chapter The P applications. It enables robust BLE master or slave nodes to be built with very low total bill-of-material costs. The P combines an excellent RF transceiver with an industry-standard enhanced 8051 MCU, in-system programmable flash memory, 8-KB RAM, and many other powerful supporting is suitable for systems where very low power consumption is features and peripherals. The P required. Very low-power sleep modes are available. Short transition times between operating modes further enable low power consumption. Combined with the Bluetooth low energy protocol stack from Texas Instruments, the P the markets most flexible and cost-effective single-mode Bluetooth low energy solution. Additional embedded software solutions and profiles are available from other Panasonic software partners. Refer to 0PAN172xETU Design-Guide. Please contact your local sales office for further details on additional options and services:
www.panasonic.com/rfmodules for the US, http://industrial.panasonic.com/eu/i/29606/wireless_modules/wireless_modules.htmlfor EU or write an e-mail to wireless@eu.panasonic.com. AN172x forms 4. 5. 6. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pideu.pansonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE No. DS-172x-2400-102 PAGE REV. 1.2 6 of 29 17.07.2012 7. DETAILED DESCRIPTION 7.1. PAN172X TERMINAL LAYOUT Top view, Application PCB 5 3 1
. 2
. 1 5 3 1
. m m 0 7
. 8 PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pideu.pansonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE No. DS-172x-2400-102 PAGE REV. 1.2 7 of 29 17.07.2012 No Pin Name A1 GND A2 P1.0 A3 Reset A4 VCC A5 VCC A6 VCC A7 GND A8 NC A9 GND A11 GND A12 GND B1 P1.3 B2 P1.2 B3 P1.1 B4 P0.6 B5 NC B6 P0.1 B7 P0.0 B8 NC B9 NC C1 NC C2 P1.4 C3 P1.5 C4 P0.7 C5 NC C6 NC C7 NC C8 GND C9 GND D1 DVDD_USB D2 USB_N D3 USB_P D4 NC D5 NC D6 NC D7 GND D8 GND D9 NC E1 P2.1/DD E2 P2.2/DC E3 DGND_USB E4 NC E5 NC E6 P0.2/RX/MISO E7 NC E8 GND E9 GND F1 GND P1.6 F2 F3 P1.7 P2.0 F4 F5 P0.4/CTS/CS F6 NC F7 F8 F9 GND F11 GND F12 GND P0.3/TX/MOSI P0.5/RTS/CLK Pin Type Ground Pin Digital I/O Digital Input Power Power Power Ground Pin Ground Pin Ground Pin Ground Pin Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Ground Pin Ground Pin Power (digital) Digital I/O Digital I/O Ground Pin Ground Pin Digital I/O Digital I/O Ground Pin Digital I/O Ground Pin Ground Pin Ground Pin Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Ground Pin Ground Pin Ground Pin Description Connect to Ground Port 1.0 20mA drive capability Reset, active-low 2V 3.6V analog/digital power supply connection 2V 3.6V analog/digital power supply connection 2V 3.6V analog/digital power supply connection Connect to Ground Not Connected Connect to Ground Connect to Ground Connect to Ground Port 1.3 Port 1.2 Port 1.1 20mA drive capability Port 0.6 Not Connected Port 0.1 Port 0.0 Not Connected Not Connected Not Connected Port 1.4 / BR-SW UART CTS Port 1.5 / BR-SW UART RTS Port 0.7 Not Connected Not Connected Not Connected Connect to Ground Connect to Ground 2V 3.6V digital power supply connection USB N / PAN1721 I2C SDA // Leave floating if not used. USB P / PAN1721 I2C SCL // Leave floating if not used. Not Connected Not Connected Not Connected Connect to Ground Connect to Ground Not Connected Port 2.1 / Programming Interface DD Port 2.2 / Programming Interface DC Connect to Ground Not Connected Not Connected Port 0.2 / TI-SW UART RX / SPI MISO Not Connected Connect to Ground Connect to Ground Connect to Ground Port 1.6 / BR-SW UART TX Port 1.7 / BR-SW UART RX Port 2.0 Port 0.4 / TI-SW UART CTS / SPI CS Not Connected Port 0.3 / TI-SW UART TX /SPI MOSI Port 0.5 / TI-SW UART RTS /SPI CLK Connect to Ground Connect to Ground Connect to Ground PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pideu.pansonic.de PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE No. DS-172x-2400-102 PAGE REV. 1.2 8 of 29 17.07.2012 CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 8. BLUETOOTH FEATURES Bluetooth 4.0 single mode low energy technology. Class 2 TX power w/o external PA, improving link robustness. Excellent link budget (up to 96 dB), enabling long-range applications. Accurate digital received signal-strength indicator (RSSI) Embedded BT-Stack available Integrates the new low power profiles and services 9. BLOCK DIAGRAM Vsupply ADC/PWM/Timer UART/SPI/USB Crystal 32.768kHz CC2540 BT-LE from TI Crystal 26 MHz Filter Block Diagram of PAN1721 is similar, but has I2C interface instead of USB. Please refer to chapter 2. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pideu.pansonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 10. TEST CONDITIONS PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE No. DS-172x-2400-102 PAGE REV. 1.2 9 of 29 17.07.2012 Measurements shall be made under operating free-air temperature range unless otherwise specified. Temperature Humidity Supply Voltage 25 10C 40 to 85%RH 3.3V 11. GENERAL DEVICE REQUIREMENTS AND OPERATION All specifications are over temperature and process, unless indicated otherwise. 11.1. ABSOLUTE MAXIMUM RATINGS No See 2 Ratings Over Operating Free-Air Temperature Range 1 Supply voltage All supply pins must have the same voltage 2 Voltage on any digital pin 3 Operating ambient temperature range 4 5 Storage temperature range Bluetooth RF inputs ESD:
All pads, according to human-body model, JEDEC STD 22, method A114 According to charged-device model, JEDEC STD 22, method C101 6 Value 0.3 to 3.9 0.3 to VDD+0.3 <3,9 40 to 85 40 to 125 10 1000 500 Unit V V C C dBm V 11.2. RECOMMENDED OPERATING CONDITIONS No Rating 1 2 Power supply voltage Maximum ambient operating temperature Min 2
-40 Max 3.6 85 Unit V C 2 Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-
rated conditions for extended periods may affect device reliability. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pideu.pansonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE No. DS-172x-2400-102 PAGE REV. 1.2 10 of 29 17.07.2012 11.3. CURRENT CONSUMPTION The current consumption is dependant on the user scenario and the setup and timing in the low power modes. The total power consumption can be optimized by adjusting the scan windows and intervals. Please refer for the different power modes to the chapter Electrical Characteristics in Semiconductor Datasheet 0 for the latest information. As indication below are typical values from CC2540 datasheet. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pideu.pansonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE No. DS-172x-2400-102 PAGE REV. 1.2 11 of 29 17.07.2012 12. BLUETOOTH RF PERFORMANCE 12.1. BLUETOOTH CHARACTERISTICS No Characteristics 1 Operation frequency range 2 Channel spacing 3 Output Power 4 Sensitivity, High Gain Mode Condition Maximum setting, measured at single ended 50ohm. Minimum setting, measured at single ended 50ohm. High-gain mode Standard mode Min 2402 Typ 2 4
-24
-93.0
-92.5 Max 2480 BT Spec Unit MHz MHz
-70
-70 dBm dBm dBm No Characteristics 1 Spurious emissions Condition Conducted measurement with a 50- single-
ended load. Complies with EN 300 328, EN 300 440 class 2, FCC CFR47, Part 15 and ARIB STD-T-66 Typ Max Unit
-41 dBm PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pideu.pansonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE No. DS-172x-2400-102 PAGE REV. 1.2 12 of 29 17.07.2012 13. SOLDERING TEMPERATURE-TIME PROFILE (FOR REFLOW SOLDERING) Temp.[C]
13.1. FOR LEAD SOLDER Recommended temp. profile for reflow soldering 150 10C 220 5C 200C 235C max. Temp.[C]
13.2. FOR LEADFREE SOLDER Our used temp. profile for reflow soldering 150C 190C 230C -250C max. 220C 10 1s 30 +20/-10s 90 30s Time [s]
30 +20/-10s 90 30s Time [s]
Reflow permissible cycle: 2 Opposite side reflow is prohibited due to module weight. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pideu.pansonic.de PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE No. DS-172x-2400-102 PAGE REV. 1.2 PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 14. MODULE DIMENSION No. Item Dimension Tolerance Remark Width Length Height 1 2 3 8.70 15.60 1.80 0.20 0.20 0.20 With case 13 of 29 17.07.2012 PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pideu.pansonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE No. DS-172x-2400-102 PAGE REV. 1.2 14 of 29 17.07.2012 PAN1 72X FOOTPRINT OF THE MODULE 15. All dimensions are in millimeters. The outer dimensions have a tolerance of 0.2mm. Top view, Application PCB 15.6 mm 1.0 0.6 1.2 2.4 F1 E1 D1 C1 B1 A1 F3 E3 D3 C3 B3 A3 F2 E2 D2 C2 B2 A2 0.6 F4 E4 D4 C4 B4 A4 F5 E5 D5 C5 B5 A5 F6 E6 D6 C6 B6 A6 F7 E7 D7 C7 B7 A7 F8 E8 D8 C8 B8 A8 F9 E9 D9 C9 B9 A9 5.0 F11 F12 A11 A12 PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pideu.pansonic.de PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE No. DS-172x-2400-102 PAGE REV. 1.2 15 of 29 17.07.2012 CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 16. CASE MARKING No. Remark 1 2 3 Marking for Pin 1 (Circle 0,15 mm) 2D-Code, for internal usage only and can be change without any notice Marking definition see chapter 15.1 2 1 3 16.1. EXAMPLE FOR MARKING P A N 1 7 2 0 E N W 8 9 8 2 0 A x K F Y Y W W D L L F C C I D :
H W / S W T 7 V P A N 1 7 16.2. MARKING DEFINITION
(1) Pin1 marking
(2) 2D code (Serial number)
(3) Marking:
PAN172x (Model Name), HW/SW (Hardware/Software version) ENW89820AxKF (Part Number, refer to chapter 22 Ordering Information) Lot code (YearYear, WeekWeek, Day, LotLot) ES (Engineering Sample marking) Note: For available Software Versions, refer to PAN172xETU Design-Guide 0 and chapter 22 Ordering Information. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pideu.pansonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE No. DS-172x-2400-102 PAGE REV. 1.2 16 of 29 17.07.2012 17. MECHANICAL REQUIREMENTS No. Item 1 2 Solderability Resistance to soldering heat Limit More than 75% of the soldering area shall be coated by solder It shall be satisfied electrical requirements and not be mechanical damage Condition Reflow soldering with recommendable temperature profile See chapter 13.2 18. DEVELOPMENT OF APPLICATIONS For development support please refer to PAN172xETU Design-Guide http://www.pedeu.panasonic.de/pdf/168ApplicationNote.pdf 0. 19. RELIABILITY TESTS The measurement should be done after being exposed to room temperature and humidity for 1 hour. No. Item Limit Vibration test Shock test Heat cycle test Moisture test Low temp. test High temp. test Electrical parameter should be in specification the same as above the same as above the same as above the same as above the same as above 1 2 3 4 5 6 Condition a) Freq.:10~50Hz,Amplitude:1.5mm a) 20min. / cycle,1hrs. each of XYZ axis b) Freq.:30~100Hz, 6G b) 20min. / cycle,1hrs. each of XYZ axis Dropped onto hard wood from height of 50cm for 3 times
-40C for 30min. and +85C for 30min.;
each temperature 300 cycles
+60C, 90% RH, 300h
-40C, 300h
+85C, 300h 20. CAUTIONS Failure to follow the guidelines set forth in this document may result in degrading of the products functions and damage to the product. 20.1. DESIGN NOTES
(1) Follow the conditions written in this specification, especially the control signals of this module.
(2) The supply voltage has to be free of AC ripple voltage (for example from a battery or a low noise regulator output). For noisy supply voltages, provide a decoupling circuit (for example a ferrite in series connection and a bypass capacitor to ground of at least 47uF directly at the module).
(3) This product should not be mechanically stressed when installed.
(4) Keep this product away from heat. Heat is the major cause of decreasing the life of these products.
(5) Avoid assembly and use of the target equipment in conditions where the products' temperature may exceed the maximum tolerance. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pideu.pansonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE No. DS-172x-2400-102 PAGE REV. 1.2 17 of 29 17.07.2012
(6) The supply voltage should not be exceedingly high or reversed. It should not carry noise and/or spikes.
(7) Keep this product away from other high frequency circuits. 20.2. INSTALLATION NOTES
(1) Reflow soldering is possible twice based on the conditions in chapter 15. Set up the temperature at the soldering portion of this product according to this reflow profile.
(2) Carefully position the products so that their heat will not burn into printed circuit boards or affect the other components that are susceptible to heat.
(3) Carefully locate these products so that their temperatures will not increase
(4) due to the effects of heat generated by neighboring components. If a vinyl-covered wire comes into contact with the products, then the cover will melt and generate toxic gas, damaging the insulation. Never allow contact between the cover and these products to occur.
(5) This product should not be mechanically stressed or vibrated when reflowed.
(6) If you want to repair your board by hand soldering, please keep the conditions of this chapter.
(7) Do not wash this product.
(8) Refer to the recommended pattern when designing a board.
(9) Pressing on parts of the metal cover or fastening objects to the metal will cause damage to the unit.
(10) For more details on LGA (Land Grid Arrey) soldering processes refer to the application note. 20.3. USAGE CONDITIONS NOTES
(1) Take measures to protect the unit against static electricity. If pulses or other transient loads (a large load applied in a short time) are applied to the products, check and evaluate their operation befor assembly on the final products.
(2) Do not use dropped products.
(3) Do not touch, damage or soil the pins.
(4) Follow the recommended condition ratings about the power supply applied to
(5) Electrode peeling strength: Do not add pressure of more than 4.9N when
(6) Pressing on parts of the metal cover or fastening objects to the metal cover this product. soldered on PCB. will cause damage.
(7) These products are intended for general purpose and standard use in general electronic equipment, such as home appliances, office equipment, information and communication equipment. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pideu.pansonic.de PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 20.4. STORAGE NOTES PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE No. DS-172x-2400-102 PAGE REV. 1.2 18 of 29 17.07.2012
(1) The module should not be stressed mechanically during storage.
(2) Do not store these products in the following conditions or the performance characteristics of the product, such as RF performance will be adversely affected:
Storage in salty air or in an environment with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NOX Storage in direct sunlight Storage in an environment where the temperature may be outside the range of 5C to 35C range, or where the humidity may be outside the 45 to 85%
range. Storage of the products for more than one year after the date of delivery Storage period: Please check the adhesive strength of the embossed tape and soldering after 6 months of storage.
(3) Keep this product away from water, poisonous gas and corrosive gas.
(4) This product should not be stressed or shocked when transported.
(5) Follow the specification when stacking packed crates (max. 10). 20.5. SAFETY CAUTIONS These specifications are intended to preserve the quality assurance of products and individual components. Before use, check and evaluate the operation when mounted on your products. Abide by these specifications, without deviation when using the products. These products may short-circuit. If electrical shocks, smoke, fire, and/or accidents involving human life are anticipated when a short circuit occurs, then provide the following failsafe functions, as a minimum.
(1) Ensure the safety of the whole system by installing a protection circuit and a protection device.
(2) Ensure the safety of the whole system by installing a redundant circuit or another system to prevent a single fault causing an unsafe status. 20.6. OTHER CAUTIONS
(1) This specification sheet is copyrighted. Please do not disclose it to a third party.
(2) Please do not use the products for other purposes than those listed.
(3) Be sure to provide an appropriate fail-safe function on your product to prevent an additional damage that may be caused by the abnormal function or the failure of the product.
(4) This product has been manufactured without any ozone chemical controlled under the Montreal Protocol.
(5) These products are not intended for other uses, other than under the special conditions shown below. Before using these products under such special conditions, check their performance and reliability under the said special conditions carefully to determine whether or not they can be used in such a manner. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pideu.pansonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE No. DS-172x-2400-102 PAGE REV. 1.2 19 of 29 17.07.2012 In liquid, such as water, salt water, oil, alkali, or organic solvent, or in places where liquid may splash. In direct sunlight, outdoors, or in a dusty environment In an environment where condensation occurs. In an environment with a high concentration of harmful gas (e.g. salty air, HCl, Cl2, SO2, H2S, NH3, and NOX)
(6) If an abnormal voltage is applied due to a problem occurring in other components or circuits, replace these products with new products because they may not be able to provide normal performance even if their electronic characteristics and appearances appear satisfactory.
(7) When you have any question or uncertainty, contact Panasonic. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pideu.pansonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 21. PACKAGING PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE No. DS-172x-2400-102 PAGE REV. 1.2 20 of 29 17.07.2012 If the product has mass production status, indicated in chapter 0, we will deliver the module in the package which are described below. 21.1. TAPE DIMENSION 21.2. PACKING IN TAPE Empty spaces in component packed area shall be less than two per reel and those spaces shall not be consecutive. Top cover tape shall not be found on reel holes and shall not stick out from reel. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pideu.pansonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE No. DS-172x-2400-102 PAGE REV. 1.2 PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE 21.3. COMPONENT DIRECTION 21.4. REEL DIMENSION 21 of 29 17.07.2012 PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pideu.pansonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE No. DS-172x-2400-102 PAGE REV. 1.2 22 of 29 17.07.2012 21.5. LABEL FOR PACKAGE The picture shows an example from similar product. 105 mm PAN1315 Customer Code ENW89818C2JF
(1T)
(1P)
(2P)
(9D)
(Q)
(HW/SW) YY WW D L L Example from above:
Lot code [YYWWDLL]
printed 08 year printed 01 normal calendar week printed 5 (Friday) day printed 1 line identifier, if more as one lot identifier per day printed 1 Customer Order Code, if any, otherwise company name will be printed Panasonic Order Code: ENW89820AxKF Date code as [YYWW]
Quantity [XXXX], variable max. 1500 Hardware /Software Release Hardware 01 Software 01 Indicates the HW revision. Indicates the SW revision. 21.6. TOTAL PACKAGE PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pideu.pansonic.de 17.07.2012 MOQ (1) 1500 1500 1500 1500 CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE No. DS-172x-2400-102 PAGE 23 of 29 REV. 1.2 PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE 22. ORDERING INFORMATION Ordering part number ENW89820A1KF (2) ENW89820A3KF (2) ENW89835A1KF (2) ENW89835A3KF (2) Notes:
Description PAN1720 CLASS 2 Bluetooth single mode Module according BT-4.0. Bluetooth smart device PAN1720 Same as above including BlueRadios BR-SPP FW version. Bluetooth smart device PAN1721 CLASS 2 Bluetooth single mode Module according BT-4.0. Bluetooth smart device PAN1721 Same as above including BlueRadios BR-SPP FW version. Bluetooth smart device
(1) Abbreviation for Minimum Order Quantity (MOQ). The standard MOQ for mass production is 1500 pieces, fewer only on customer demand. Samples for evaluation can be delivered at any quantity via the distribution channels.
(2) Samples are available on customer demand 22.1. INFORMATION REGARDING SOFTWARE VERSIONS ENW89820A1KF:
The modules will be delivered with an empty flash. Customers need to program their own TI software in the production process. For details refer to the design guide. ENW89820A3KF:
The modules are delivered with BlueRadios nBlue software. This software includes a bootloader and can be updated over the UART. For the latest revision refer to this link: http://blueradios.com/panasonic/index.php Note: New customers seeking firmware and firmware support are required to register by providing an invoice number. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pideu.pansonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE No. DS-172x-2400-102 PAGE REV. 1.2 24 of 29 17.07.2012 23. ROHS DECLARATION Declaration of environmental compatibility for supplied products:
Hereby we declare to our best present knowledge based on declaration of our suppliers that this product do not contain by now the following substances which are banned by Directive 2002/95/EC
(RoHS) or if contain a maximum concentration of 0,1% by weight in homogeneous materials for Lead and lead compounds Mercury and mercury compounds Chromium (VI) PBB (polybrominated biphenyl) category PBDE (polybrominated biphenyl ether) category And a maximum concentration of 0,01% by weight in homogeneous materials for Cadmium and cadmium compounds PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pideu.pansonic.de PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 24. DATA SHEET STATUS PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE No. DS-172x-2400-102 PAGE REV. 1.2 25 of 29 17.07.2012 Panasonic reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Please consult the most recently issued data sheet before initiating or completing a design. Use this URL to search for the most recent version of this data sheet: Use this URL to search for the most recent version of this data sheet:
PAN172x Datasheet 25. HISTORY FOR THIS DOCUMENT Revision Date Modification / Remarks November 2011 1st preliminary version. November 2011 Deleted footnote in chapter 11. April 2012 July 2012 July 2012 Released Version. Add chapter 22.1 Information regarding Software Versions. Link to LGA app note. Removed watermark. UART pinning for BR-SW version. I2C pinning for PAN1721 version. FCC, IC, IDs. Added remark top view for footprint. Corrected FCC ID to T7VPAN17. 0.01 0.02 1.00 1.1 1.2 26. RELATED DOCUMENTS For an update, please search in the suitable homepage. PAN172xETU Design-Guide http://www.pedeu.panasonic.de/pdf/168ApplicationNote.pdf Semiconductor Datasheet CC2540 from Texas Instruments CC2541 from Texas Instruments Application Note Land Grid Array http://www.pedeu.panasonic.de/pdf/184ext.pdf PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pideu.pansonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE No. DS-172x-2400-102 PAGE REV. 1.2 26 of 29 17.07.2012 27. GENERAL INFORMATION Panasonic Industrial Devices Europe GmbH 2012. All rights reserved. This product description does not lodge the claim to be complete and free of mistakes. Please contact the related product manager in every case. If we deliver ES samples to the customer, these samples have the status Engineering Samples. This means, the design of this product is not yet concluded. Engineering Samples may be partially or fully functional, and there may be differences to be published Data Sheet. Engineering Samples are not qualified and are not to be used for reliability testing or series production. Disclaimer:
Customer acknowledges that samples may deviate from the Data Sheet and may bear defects due to their status of development and the lack of qualification mentioned above. Panasonic rejects any liability or product warranty for Engineering Samples. In particular, Panasonic disclaims liability for damages caused by the use of the Engineering Sample other than for Evaluation Purposes, particularly the installation or integration in an other product to be sold by Customer, deviation or lapse in function of Engineering Sample, improper use of Engineering Samples. Panasonic disclaimes any liability for consequential and incidental damages. In case of any questions, please contact your local sales partner or the related product manager. 28. REGULATORY INFORMATION 28.1. FCC NOTICE The devices PAN17, for details refer to Chapter 22, including the antennas, which are listed in 28.5, complies with Part 15 of the FCC Rules. The device meets the requirements for modular transmitter approval as detailed in FCC public Notice DA00-
1407.transmitter Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including operation. interference undesired cause may that 28.2. CAUTION The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Panasonic Industrial Devices Europe GmbH may void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pideu.pansonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE No. DS-172x-2400-102 PAGE REV. 1.2 27 of 29 17.07.2012 particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the Increase the separation between the equipment and receiver. receiver is connected. Consult the dealer or an experienced radio/TV technician for help 28.3. LABELING REQUIREMENTS The Original Equipment Manufacturer (OEM) must ensure labeling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate Panasonic FCC identifier for this product as well as the FCC Notice above. The FCC identifier are FCC ID: T7VPAN17. This FCC identifier is valid for all PAN172x modules, for details, see the Chapter 22. Ordering Information. In end
"Contains FCC ID: T7VPAN17"
product must exterior with that FCC labelled case any the be 28.4. ANTENNA WARNING For the related part number of PAN172x refer to Chapter 22. Ordering Information. This devices are tested with a standard SMA connector and with the antennas listed below. When integrated in the OEMs product, these fixed antennas require installation preventing end-users from replacing them with non-approved antennas. Any antenna not in the following table must be tested to comply with FCC Section 15.203 for unique antenna connectors and Section 15.247 for emissions. The FCC identifier for this device with the antenna listed in item 1 are the same (FCC ID: T7VPAN17). 28.5. APPROVED ANTENNA LIST Note: We are able to qualify your antenna and will add to this list as that process is completed. Item Part Number Manufacturer Frequency Band Type Gain (dBi) 2 LDA212G3110K Murata 2.4GHz Chip-Antenna
+0.9 28.6. RF EXPOSURE PAN172X To comply with FCC RF Exposure requirements, the Original Equipment Manufacturer
(OEM) must ensure that the approved antenna in the previous table must be installed. The preceding statement must be included as a CAUTION statement in manuals for products operating with the approved antennas in the previous table to alert users on FCC RF Exposure compliance. Any notification to the end user of installation or removal instructions about the integrated radio module is not allowed. radiated output power of PAN172x with mounted ceramic antenna The
(FCC ID: T7VPAN17) is far below the FCC radio frequency exposure limits. Nevertheless, the PAN172x shall be used in such a manner that the potential for human contact during normal operation is minimized. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pideu.pansonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE No. DS-172x-2400-102 PAGE REV. 1.2 28 of 29 17.07.2012 End users may not be provided with the module installation instructions. OEM integrators and end users must be provided with transmitter operating conditions for satisfying RF exposure compliance. INDUSTRY CANADA CERTIFICATION 29. PAN172x is licensed to meet the regulatory requirements of Industry Canada (IC), license: IC: 216Q-PAN17 Manufacturers of mobile, fixed or portable devices incorporating this module are advised to clarify any regulatory questions and ensure compliance for SAR and/or RF exposure limits. Users can obtain Canadian information on RF exposure and compliance from www.ic.gc.ca. This device has been designed to operate with the antennas listed in Table 20 above, having a maximum gain of 0.9 dBi. Antennas not included in this list or having a gain greater than 0.9 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Due to the model size the IC identifier is displayed in the installation instruction only and can not be displayed on the modules label due to the limited size (8.7x15.6mm). 29.1. IC NOTICE The devices PAN172x, for details refer to Chapter 22, including the antennas, which are listed in 28.5, complies with Canada RSS-GEN Rules. The device meets the requirements in RSS-GEN. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including operation. transmitter approval as detailed for modular interference undesired cause may that 29.2. LABELING REQUIREMENTS The Original Equipment Manufacturer (OEM) must ensure that IC labeling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate Panasonic IC identifier for this product as well as the IC Notice above. The IC identifier is 216Q-PAN17. This IC identifier is valid for all PAN172x modules, for details, see the Chapter 22. Ordering Information. In
"Contains IC: 216Q-PAN17"
product must exterior with labelled case end any the be 30. EUROPEAN R&TTE DECLARATION OF CONFORMITY Hereby, Panasonic Industrial Devices Europe GmbH, declares that the Bluetooth module PAN172x and their versions is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. As a result of the conformity assessment procedure described in Annex III of the Directive 1999/5/EC, the end-
customer equipment should be labelled as follows:
PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pideu.pansonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN172x / PAN1721 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE PANASONICS CODE ENW89820AxKF / ENW89835AxKF DATE No. DS-172x-2400-102 PAGE REV. 1.2 29 of 29 17.07.2012 PAN172x and their versions in the specified reference design can be used in the following countries: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Italy, Latvia, Lithuania, Luxembourg, Malta, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, The Netherlands, the United Kingdom, Switzerland, and Norway. Ireland, LIFE SUPPORT POLICY 31. This Panasonic product is not designed for use in life support appliances, devices, or systems where malfunction can reasonably be expected to result in a significant personal injury to the user, or as a critical component in any life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Panasonic customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panasonic for any damages resulting. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pideu.pansonic.de
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2012-08-17 | 2402 ~ 2480 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2012-08-17
|
||||
1 | Applicant's complete, legal business name |
Panasonic Industrial Devices Europe GmbH
|
||||
1 | FCC Registration Number (FRN) |
0014980072
|
||||
1 | Physical Address |
Zeppelinstrasse 19
|
||||
1 |
Lueneburg, N/A 21337
|
|||||
1 |
Germany
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
j******@eurofins.de
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
T7V
|
||||
1 | Equipment Product Code |
PAN17
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
O****** K******
|
||||
1 | Title |
Product Safety
|
||||
1 | Telephone Number |
+49-4******** Extension:
|
||||
1 | Fax Number |
+49-4********
|
||||
1 |
o******@eu.panasonic.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Bluetooth Low Energy Module | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Single Modular Approval | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Single Modular Approval. Output power listed is conducted. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Eurofins Product Service GmbH
|
||||
1 | Name |
J**** K****
|
||||
1 | Telephone Number |
49-33********
|
||||
1 | Fax Number |
49-33********
|
||||
1 |
j******@eurofins.de
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0010000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC