all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 |
|
15 ENW89837AxKF UserMan | Users Manual | 935.23 KiB | ||||
1 2 3 4 |
|
User manual | Users Manual | 956.20 KiB | ||||
1 2 3 4 | Attestation Statements | |||||||
1 2 3 4 | Attestation Statements | |||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | External Photos | |||||||
1 2 3 4 | Internal Photos | |||||||
1 2 3 4 | ID Label/Location Info | |||||||
1 2 3 4 | ID Label/Location Info | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Setup Photos | |||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | ID Label/Location Info | |||||||
1 2 3 4 | External Photos | |||||||
1 2 3 4 | Internal Photos | |||||||
1 2 3 4 | Test Setup Photos | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Operational Description | |||||||
1 2 3 4 | RF Exposure Info | |||||||
1 2 3 4 | Operational Description |
1 2 3 4 | 15 ENW89837AxKF UserMan | Users Manual | 935.23 KiB |
CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF No. DS-1026-2400-102 PAGE 1 of 35 REV. 0.3 DATE 02.10.2013 Product Specification Applicant / Manufacturer Hardware Applicant / Manufacturer Software Panasonic Industrial Devices Europe GmbH Zeppelinstrasse 19 21337 Lneburg Germany TOSHIBA Electronics Europe GmbH Hansaallee 181 40549 Dsseldorf Germany Software Version By purchase of any of products described in this document the customer accepts the document's validity and declares their agreement and understanding of its contents and recommendations. Panasonic reserves the right to make changes as required without notification. Please refer to chapter 20 / 21 CHECKED / APPROVED:
Company:
DATE:
NAME:
SIGNATURE:
NOTE:
AT LEAST ONE SET OF APPROVED SPECIFICATIONS SHOULD BE RETURNED TO THE ADDRESS OF THE ISSUING PARTY. Power Electronics R&D Center Wireless Connectivity Panasonic Industrial Devices Europe GmbH APPROVED genehmigt CHECKED geprft DESIGNED erstellt CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF TABLE OF CONTENTS No. DS-1026-2400-102 PAGE 2 of 35 REV. 0.3 DATE 02.10.2013 1 2 3 4 5 6
..................................................................................................4 Scope of this Document Key Features...................................................................................................................4 Bluetooth Low Energy.....................................................................................................5 Applications for the Module.............................................................................................5 Description for the Module ..............................................................................................5 Detailed Description........................................................................................................6 6.1 PAN1026 Terminal Layout.....................................................................................6 6.2 PAN1026 Terminal Description .............................................................................6 6.3 UART Interface ......................................................................................................8 6.3.1 Features ...................................................................................................8 6.3.2 Connection Example ................................................................................9 Frame Format.........................................................................................10 6.3.3 6.3.4 Flow Control Function ............................................................................10 6.3.5 UART Baud Rate Setting .......................................................................10 6.3.6 Error Detect Function .............................................................................11 Bluetooth Features........................................................................................................12 7 Block Diagram...............................................................................................................12 8 9 Test Conditions .............................................................................................................13 10 General Device Requirements and Operation ..............................................................13 10.1 Absolute Maximum Ratings .................................................................................13 10.2 Recommended Operating Conditions..................................................................13 10.3 Current Consumption...........................................................................................14 11 Bluetooth RF Performance............................................................................................15 11.1 Bluetooth Characteristics.....................................................................................15 12 Soldering Temperature-Time Profile (for reflow soldering) ...........................................16 13 Module Dimension ........................................................................................................17 14 PAN1026 FootPrint of the Module ................................................................................18 15 Case Marking................................................................................................................19 15.1 Example for Marking............................................................................................19 15.2 Marking Definition ................................................................................................19 16 Mechanical Requirements.............................................................................................19 17 Reliability Tests.............................................................................................................20 18 Cautions........................................................................................................................20 18.1 Design Notes .......................................................................................................20 18.2 Installation Notes .................................................................................................21 18.3 Usage Conditions Notes ......................................................................................21 18.4 Storage Notes......................................................................................................22 18.5 Safety Cautions ...................................................................................................22 18.6 Other cautions .....................................................................................................22 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF No. DS-1026-2400-102 PAGE 3 of 35 REV. 0.3 DATE 02.10.2013 19 Packaging .....................................................................................................................24 19.1 Tape Dimension...................................................................................................24 19.2 Packing in Tape ...................................................................................................24 19.3 Component Direction ...........................................................................................25 19.4 Reel Dimension ...................................................................................................25 19.5 Label for Package................................................................................................26 19.6 Total Package......................................................................................................26 20 Ordering Information .....................................................................................................27 21 Information regarding Software Versions......................................................................27 22 Software........................................................................................................................28 23 Software block diagram.................................................................................................29 24 RoHS and REACH Declaration.....................................................................................30 25 Data Sheet Status.........................................................................................................31 26 History for this Document..............................................................................................31 27 Related Documents.......................................................................................................31 28 General Information ......................................................................................................32 29 Regulatory Information..................................................................................................32 29.1 FCC Notice ..........................................................................................................32 29.2 Caution ................................................................................................................32 29.3 Labeling Requirements........................................................................................33 29.4 Antenna Warning .................................................................................................33 29.5 Approved Antenna List ........................................................................................33 29.6 RF Exposure PAN1026 .......................................................................................33 Industry Canada Certification........................................................................................34 30.1 IC Notice ..............................................................................................................34 30.2 Labeling Requirements........................................................................................34 31 European R&TTE Declaration of Conformity ................................................................34 32 Life Support Policy ........................................................................................................35 30 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF 1 SCOPE OF THIS DOCUMENT No. DS-1026-2400-102 PAGE 4 of 35 REV. 0.3 DATE 02.10.2013 This product specification applies to Panasonics, Class 2, Bluetooth1 classic and low energy dual mode module, series number: PAN1026. 2 KEY FEATURES Bluetooth Classic and BLE (Dual Mode) support Bluetooth Classic 2.1 embedded SPP profile with high level API commands Bluetooth 4.0 (LE) embedded GATT profile with high level API commands, compatible to Toshiba reference BLE profiles Operational Temperature Range -40 / 85 degree C Operational Voltage 1.8V or 3.0V +/- 10%
Dimension 15,6*8,7*1,9mm3 Internal crystal oscillator (26MHz) Integrated shielding to resist EMI No external components needed High sensitivity (-88 dBm typ.) Tx power control up to a maximum of 4.0 dBm (typical) 1 Bluetooth is a registered trademark of the Bluetooth Special Interest Group. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF 3 BLUETOOTH LOW ENERGY No. DS-1026-2400-102 PAGE 5 of 35 REV. 0.3 DATE 02.10.2013 Bluetooth Low Energy (BLE) is a part of Bluetooth Ver. 4.0, BT 4.0 covers both BLE as well as BT classic 2.1 and 3.0. If both are implemented in one device it is called dual mode. Dual mode chips implement the low energy specification,providing connectivity to coin cell battery applications. Dual mode combines low energy with the power of classic Bluetooth and are likely to become a de facto feature in almost all new Bluetooth enabled cellular phones,computers or portable communication nodes. Bluetooth Low Energy (BLE) is not backwards compatible with previous Bluetooth classic standards (2.1+EDR or 3.0). Dual mode Bluetooth 4.0 is backwards compatible but is not practical for low power devices but targeted to gateway products 4 APPLICATIONS FOR THE MODULE All Embedded Wireless Applications Industrial Control Access Points Medical Scanners Wireless Sensors Low Power Proximity Smart Phone Access Points Temperature Wellness Sports 5 DESCRIPTION FOR THE MODULE The PAN1026 is a short-range Class 2 BLE dual mode module for implementing Bluetooth functionality into various electronic devices. A block diagram can be found in chapter 8. Please contact your local sales office for further details on additional options and services:
www.panasonic.com/rfmodules for the US, http://industrial.panasonic.com/eu/i/29606/wireless_modules/wireless_modules.htmlfor EU or write an e-mail to wireless@eu.panasonic.com. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF 6 DETAILED DESCRIPTION 6.1 PAN1026 TERMINAL LAYOUT Top view, Application PCB No. DS-1026-2400-102 PAGE 6 of 35 REV. 0.3 DATE 02.10.2013 5 3
. 1 2
. 1 5 3 1
. m m 0 7
. 8 6.2 PAN1026 TERMINAL DESCRIPTION Pin Name No GND A1 NC A2 Reset A3 VCC A4 VCC A5 VCC A6 GND A7 NC A8 GND A9 A11 GND A12 GND al Input GPIO Number Pin Type Ground Pin NC Digit Power Power Power Ground Pin NC Grou nd Pin Ground Pin Ground Pin nd Description Connect to Grou Not connected, leave open Reset, active-low 2V 3.6V analog/digital power supply connection 2V 3.6V analog/digital power supply connection 2V 3.6V analog/digital power supply connection Connect to Ground Not Connected Connect to Grou nd Connect to Ground Connect to Ground PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF No. DS-1026-2400-102 PAGE 7 of 35 REV. 0.3 DATE 02.10.2013 Description Not connected, leave open Not supported Not supported Not connected, leave open Not connected, leave open Not connected, leave open Not connected, leave open Not connected, leave open Not connected, leave open Not supported Not supported Not supported Not connected, leave open Not connected, leave open PCM Clock PCM Syncronisation Connect to Ground Connect to Ground Not supported Not supported Not supported USB direct is no may use this pin as normal GPIO0. When USB is supported the, pin will be Select USB (Connect to PIN E4) Refer to the Related Documents section, item one. [1]
Not connected, leave open PCM In Not supported Connect to Ground Connect to Ground Antenna Pin (Not connected for standard version) I2C Interface (Only Internal) Connect to Testpin I2C Interface (Only Internal) Connect to Testpin USB direct is not currently supported by the IC th pin to to GND. If USB will be supported in the next revision, connect to VCC. Refer to the Related Documents section, item one. [1]
USB direct is not currently supported by the IC Leave this pin open.. Whjen USB is supported the pin would be Select USB
(Connect to PIN D4). Refer to the Related Documents section, item one. [1]
t currently supported by the IC and therefore you erefore put this Pin Name No NC B1 BTS B2 BTA B3 NC B4 NC B5 NC B6 NC B7 NC B8 NC B9 CS0X C1 C2 BTI C3 WIA C4 NC NC C5 PCMCLK C6 FSYNC C7 C8 GND GND C9 CS1X D1 D2 DIN GPIO1 D3 GPIO Number Pin Type PIO 11 G GPIO 10 PIO 17 G GPIO 13 GPIO 12 PIO 04 G GPIO 05 GPIO 18 GPIO 16 GPIO 01 NC NC NC NC NC NC NC NC NC al I/O Digit Digital I/O Ground Pin Ground Pin D igital I/O D4 USB*/GPIO0 Digital I/O NC Digit al Input Ground Pin Ground Pin RF - Signal Digital I/O Digital I/O Power D5 D6 D7 D8 D9 E1 E2 NC PCMIN GND GND ANT SDA SCL E3 VDD_USB E4 USB*
PIO 03 G GPIO 15 GPIO 14 E5 E6 E7 E8 E9 CLKREQ UART RXD PCMOUT GND GND GPIO 02 Digital Output Active High once crystal frequency is stable Digital Input Digital Output Ground Pin Ground Pin UART RXD PCM Output Connect to Ground Connect to Ground PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF No. DS-1026-2400-102 PAGE 8 of 35 REV. 0.3 DATE 02.10.2013 No F1 F2 Pin Name GND EEPROM_WP GPIO Number Pin Type Ground Pin Digital Input F3 USB_P Digital I/O Description Connect to Ground Internal EEPROM W rite Protect (Active High) USB direct is not currently supported by the IC pin to GND. Whjen USB is supported the pin would be USB Data In/Out Refer to the Related Documents section, item one. [1]
USB direct is not currently supported by the IC therefore put this pin to GND. Whjen USB is supported the pin would be USB Data In/Out Refer to the Related Documents section, item one. [1]
UART CTS Input Clock for 32.768KHz therefore put this Digital I/O Digital Input Digital Input Digital Output UART TX Digital Output UART RTS Ground Pin Ground Pin Ground Pin Connect to Ground Connect to Ground Connect to Ground F4 USB_M UART CTS F5 SLEEPCLK F6 UARTTXD F7 UARTRTS F8 F9 GND F11 GND F12 GND 6.3 UART INTERFACE 6.3.1 Features Full-duplex 4-wire data transfer: RX, TX, RTS, CTS Programmable baud rate:
2400bps to 4.33 Mb Data format (No parity bit):
LSB first Start bit (1-bit) Data bit (8-bit):
Stop bit (1-bit) Error detection:
ps Character timeout, Overrun error, Framing error C35661 UART interface is used to transfer control command and data and is multiplexed T with GPIO pin. After the release reset state, TC35661 firmware sets UART interface mode to the related GPIO pins. The default bit rate depends on the selection ROM version. (e.g. TC35661-501: 115,2kbps) PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF 6.3.2 Connection Example No. DS-1026-2400-102 PAGE 9 of 35 REV. 0.3 DATE 02.10.2013 TC35661 UART Receive flow control (RTS) HOST CPU UART Transmit flow control (CTS) UART Receive data (RX) UART Transmit data (TX) UART connection example Reset UART Transmit data UART Receive data UART Receive flow control UART Transmit flow control Reset Output direction Input direction Output direction Input direction GPIO Configuration
(Pulled-up/ input) UART Communication Power-up sequence for UART configuration PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF 6.3.3 Frame Format TC35661 supporting format is as follows. No. DS-1026-2400-102 PAGE 10 of 35 REV. 0.3 DATE 02.10.2013 Number of data bits:
Parity bit:
Stop bit:
Flow control:
8 bits no parity 1 stop bit RTS/CTS UART Transmit flow control 1 23456789 1 UART Transmit data LSB 1 2 3 4 5 6 MSB Start bit Stop bit UART Receive flow control UART Receive data LSB 1 2 3 4 5 6 MSB Start bit OverSampling (*12 to17) /bit Stop bit UART data frame 6.3.4 Flow Control Function TC35661 UART interface uses flow control function by hardware signal, Transmit flow control (CTSX) and receive flow control (RTSX). Above Figure shows signals input and output direction . CTSX input signal is used for UART transmitting. Low input indicates close of the preparation of the other party to receive data and TC35661 executes UART transmitting data if there is data for transmission. In case of input high level, TC35661 stops transmitting by UART frame. RTSX input signal is used for UART receiving. Low output indicates request data transmission to UART transmit side device of the other party. TC35661 outputs Low level from RTSX when being able to receive data and prepares to receive data. Response time of UART transmitting and receiving for flow control signal depends on baud rate and internal process status of frame. It is from 1 frame to 4 frames. 6.3.5 UART Baud Rate Setting TC35661 UART interface has a programmable baud rate setting function. The UART baud rate can be set according to the following equation. The baud rate generating clock frequency is set to either 39 MHz or 52 MHz. The over-sampling number is set to an integer PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF No. DS-1026-2400-102 PAGE 11 of 35 REV. 0.3 DATE 02.10.2013 that ranges from 12 to 17. The dividing ratio is set to an integer that ranges from 1 to 65,535. UART BaudRate Baud Over Rate Sampling Clock Generating Number Frequency Ratio Dividing Table 6-1 shows examples of UART Baud rate setting. The maximum of the actual baud rate is 4,333,333 [bps]. If other target baud rates are required, please contact our engineering department. Table 6-1 UART Baudrate setting Target baud rate Actual baud rate
[bps]
[bps]
Baud rate generating clock frequency
[MHz]
Over-sampling number Dividing ratio Deviation
115,200 115,200 921,600 921,600 1,843,200 2,764,800 4,329,600 116,071 116,071 928,571 928,571 1,875,143 2,785,714 4,333,333 39 52 39 52 52 39 52 12 14 14 14 14 14 12 28 32 3 4 2 1 1
+0.7564
+0.7564
+0.7564
+0.7564
+0.7564
+0.7564
+0.0862 6.3.6 Error Detect Function TC35661 UART interface has 3 kinds of error functions. Receiver timeout error Receiver over run error Receiver frame error Receiver timeout error reports as an error if the receiver frame intreval counted by TC35661 internal timer is equal to or greater than a predetermined time Receiver over run error is reported if UART internal receive frame buffer TC35661 is overflowed. Receiver frame error is reported if it fails to recognize the unit frame. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF 7 BLUETOOTH FEATURES No. DS-1026-2400-102 PAGE 12 of 35 REV. 0.3 DATE 02.10.2013 Bluetooth 4.0 with SPP & GATT GAP support for SPP GATT Server and Client Mode are supported for LE Class 2 TX power w/o external PA, improving link robustness. Excellent link budget (up to 91 dB), enabling long-range applications. GAP peripheral support for LE Note:
For GAP Broadcaster and Peripheral role are supported Observer and Central is not supported on GAP For GATT Server and Client Mode are supported 8 BLOCK DIAGRAM PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 9 TEST CONDITIONS PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF No. DS-1026-2400-102 PAGE 13 of 35 REV. 0.3 DATE 02.10.2013 Measurements shall be made under operating free-air temperature range unless otherwise specified. Temperature Humidity Supply Voltage 25 10C 40 to 85%RH 3.3V 10 GENERAL DEVICE REQUIREMENTS AND OPERATION All specifications are over temperature and process, unless indicated otherwise. 10.1 ABSOLUTE MAXIMUM RATINGS No See 2 Ratings Over Operating Free-Air Temperature Range 1 Voltage on any digital pin 2 Operating ambient temperature range 3 4 Storage temperature range Bluetooth RF inputs ESD:
All pads, according to human-body model, JEDEC STD 22, method A114 According to charged-device model, JEDEC STD 22, method C101 5 Value 0.3 to VDD+0.3 40 to 85 40 to 125 10 1000 500 10.2 RECOMMENDED OPERATING CONDITIONS No Rating 1 1 2 Power supply voltage Power supply voltage Maximum ambient operating temperature Min 1.7 2.7 Typ 1.8 3.3
-40 Max 1.9 3.6 85 Unit V C C dBm V Unit V V C 2 Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 10.3 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF CURRENT CONSUMPTION No. DS-1026-2400-102 PAGE 14 of 35 REV. 0.3 DATE 02.10.2013 The current consumption is dependent on the user scenario and the setup and timing in the low power modes. No Characteristics 1 Idle Current 2 3 4 5 During Connection During Connection During Connection During Connection Condition After reset was pulled down. Sending 3-DH5 packets. Max. output power. Sending DH5 packets. Max. output power. Sending DH3 packets. Max. output power. Sending DH1 packets. Max. output power. Min Typ 7.8 62 62 61 55 Max Unit mA mA mA mA mA PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF 11 BLUETOOTH RF PERFORMANCE No. DS-1026-2400-102 PAGE 15 of 35 REV. 0.3 DATE 02.10.2013 11.1 BLUETOOTH CHARACTERISTICS No Characteristics 1 Operation frequency range 2 Channel spacing Condition BT-Classic/BLE 3 Output Power Maximum setting, measured at dual ended 50ohm. 4 Sensitivity Min 2402 Typ 1/2 4
-88 Max 2480 BT Spec Unit MHz MHz dBm dBm No Characteristics 1 Spurious emissions Condition Conducted measurement with a 50- dual-ended load. Complies with EN 300 328, EN 300 440 class 2, FCC CFR47, Part 15 and ARIB STD-T-66 Typ Max
<-30 Unit dBm PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF No. DS-1026-2400-102 PAGE 16 of 35 REV. 0.3 DATE 02.10.2013 12 SOLDERING TEMPERATURE-TIME PROFILE (FOR REFLOW SOLDERING) CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 Reflow permissible cycle:
Opposite side reflow is prohibited due to module weight. 2 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 13 MODULE DIMENSION No. DS-1026-2400-102 PAGE 17 of 35 REV. 0.3 DATE 02.10.2013 No. Item Dimension Tolerance Remark Width Length Height 1 2 3 8.70 15.60 1.80 0.20 0.20 0.20 With case PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF 14 PAN1026 FOOTPRINT OF THE MODULE All dimensions are in millimeters. The outer dimensions have a tolerance of 0.2mm. Top view, Application PCB No. DS-1026-2400-102 PAGE 18 of 35 REV. 0.3 DATE 02.10.2013 15.6 mm 1.0 0.6 1.2 2.4 F1 E1 D1 C1 B1 A1 F3 E3 D3 C3 B3 A3 F2 E2 D2 C2 B2 A2 0.6 F4 E4 D4 C4 B4 A4 F5 E5 D5 C5 B5 A5 F6 E6 D6 C6 B6 A6 F7 E7 D7 C7 B7 A7 F8 E8 D8 C8 B8 A8 F9 E9 D9 C9 B9 A9 5.0 F11 F12 A11 A12 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 15 CASE MARKING PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF No. DS-1026-2400-102 PAGE 19 of 35 REV. 0.3 DATE 02.10.2013 No. Remark 1 2 3 Marking for Pin 1 (Circle 0,15 mm) 2D-Code, for internal usage only and can be change without any notice Marking definition see chapter 15.1 2 1 3 15.1 EXAMPLE FOR MARKING P A N 1 0 2 6 E N W 8 9 8 3 7 A 3 K F Y Y W W D L L F C C I D :
H W / S W T 7 V P A N 1 0 15.2 MARKING DEFINITION
(1) Pin1 marking
(2) 2D code (Serial number)
(3) Marking:
PAN1026 (Model Name), HW/SW (Hardware/Software version) ENW89837AxKF (Part Number, refer to chapter 20 Ordering Information) Lot code (YearYear, WeekWeek, Day, LotLot) ES (Engineering Sample marking) 16 MECHANICAL REQUIREMENTS No. Item 1 2 Solderability Resistance to soldering heat Limit More than 75% of the soldering area shall be coated by solder It shall be satisfied electrical requirements and not be mechanical damage Condition Reflow soldering with recommendable temperature profile PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 17 RELIABILITY TESTS PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF No. DS-1026-2400-102 PAGE 20 of 35 REV. 0.3 DATE 02.10.2013 The measurement should be done after being exposed to room temperature and humidity for 1 hour. No. Item Limit Vibration test Shock test Heat cycle test Moisture test Low temp. test High temp. test Electrical parameter should be in specification the same as above the same as above the same as above the same as above the same as above 1 2 3 4 5 6 Condition a) Freq.:10~50Hz,Amplitude:1.5mm a) 20min. / cycle,1hrs. each of XYZ axis b) Freq.:30~100Hz, 6G b) 20min. / cycle,1hrs. each of XYZ axis Dropped onto hard wood from height of 50cm for 3 times
-40C for 30min. and +85C for 30min.;
each temperature 300 cycles
+60C, 90% RH, 300h
-40C, 300h
+85C, 300h 18 CAUTIONS Failure to follow the guidelines set forth in this document may result in degrading of the products functions and damage to the product. 18.1 DESIGN NOTES
(1) Follow the conditions written in this specification, especially the control signals of this module.
(2) The supply voltage has to be free of AC ripple voltage (for example from a battery or a low noise regulator output). For noisy supply voltages, provide a decoupling circuit (for example a ferrite in series connection and a bypass capacitor to ground of at least 47uF directly at the module).
(3) This product should not be mechanically stressed when installed.
(4) Keep this product away from heat. Heat is the major cause of decreasing the life of these products.
(5) Avoid assembly and use of the target equipment in conditions where the products' temperature may exceed the maximum tolerance.
(6) The supply voltage should not be exceedingly high or reversed. It should not carry noise and/or spikes.
(7) Keep this product away from other high frequency circuits. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF No. DS-1026-2400-102 PAGE 21 of 35 REV. 0.3 DATE 02.10.2013 18.2 INSTALLATION NOTES
(4)
(1) Reflow soldering is possible twice based on the conditions in chapter 15. Set up the temperature at the soldering portion of this product according to this reflow profile.
(2) Carefully position the products so that their heat will not burn into printed circuit boards or affect the other components that are susceptible to heat.
(3) Carefully locate these products so that their temperatures will not increase due to the effects of heat generated by neighboring components. If a vinyl-covered wire comes into contact with the products, then the cover will melt and generate toxic gas, damaging the insulation. Never allow contact between the cover and these products to occur.
(5) This product should not be mechanically stressed or vibrated when reflowed.
(6) If you want to repair your board by hand soldering, please keep the conditions of this chapter.
(7) Do not wash this product.
(8) Refer to the recommended pattern when designing a board.
(9) Pressing on parts of the metal cover or fastening objects to the metal will cause
(10) For more details on LGA (Land Grid Arrey) soldering processes refer to the damage to the unit. application note. 18.3 USAGE CONDITIONS NOTES
(1) Take measures to protect the unit against static electricity. If pulses or other transient loads (a large load applied in a short time) are applied to the products, check and evaluate their operation befor assembly on the final products.
(2) Do not use dropped products.
(3) Do not touch, damage or soil the pins.
(4) Follow the recommended condition ratings about the power supply applied to this product. soldered on PCB. cause damage.
(5) Electrode peeling strength: Do not add pressure of more than 4.9N when
(6) Pressing on parts of the metal cover or fastening objects to the metal cover will
(7) These products are intended for general purpose and standard use in general electronic equipment, such as home appliances, office equipment, information and communication equipment. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF 18.4 STORAGE NOTES No. DS-1026-2400-102 PAGE 22 of 35 REV. 0.3 DATE 02.10.2013
(1) The module should not be stressed mechanically during storage.
(2) Do not store these products in the following conditions or the performance characteristics of the product, such as RF performance will be adversely affected:
Storage in salty air or in an environment with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NOX Storage in direct sunlight Storage in an environment where the temperature may be outside the range of 5C to 35C range, or where the humidity may be outside the 45 to 85% range. Storage of the products for more than one year after the date of delivery Storage period: Please check the adhesive strength of the embossed tape and soldering after 6 months of storage.
(3) Keep this product away from water, poisonous gas and corrosive gas.
(4) This product should not be stressed or shocked when transported.
(5) Follow the specification when stacking packed crates (max. 10). 18.5 SAFETY CAUTIONS These specifications are intended to preserve the quality assurance of products and individual components. Before use, check and evaluate the operation when mounted on your products. Abide by these specifications, without deviation when using the products. These products may short-
circuit. If electrical shocks, smoke, fire, and/or accidents involving human life are anticipated when a short circuit occurs, then provide the following failsafe functions, as a minimum.
(1) Ensure the safety of the whole system by installing a protection circuit and a protection device.
(2) Ensure the safety of the whole system by installing a redundant circuit or another system to prevent a dual fault causing an unsafe status. 18.6 OTHER CAUTIONS
(1) This specification sheet is copyrighted. Reproduction of this data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices.
(2) Do not use the products for other purposes than those listed.
(3) Be sure to provide an appropriate fail-safe function on your product to prevent an additional damage that may be caused by the abnormal function or the failure of the product.
(4) This product has been manufactured without any ozone chemical controlled under the Montreal Protocol.
(5) These products are not intended for other uses, other than under the special conditions shown below. Before using these products under such special conditions, check their performance and reliability under the said special conditions carefully to determine whether or not they can be used in such a manner. In liquid, such as water, salt water, oil, alkali, or organic solvent, or in places where liquid may splash. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF No. DS-1026-2400-102 PAGE 23 of 35 REV. 0.3 DATE 02.10.2013 In direct sunlight, outdoors, or in a dusty environment In an environment where condensation occurs. In an environment with a high concentration of harmful gas (e.g. salty air, HCl, Cl2, SO2, H2S, NH3, and NOX)
(6) If an abnormal voltage is applied due to a problem occurring in other components or circuits, replace these products with new products because they may not be able to provide normal performance even if their electronic characteristics and appearances appear satisfactory.
(7) When you have any question or uncertainty, contact Panasonic. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 19 PACKAGING PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF No. DS-1026-2400-102 PAGE 24 of 35 REV. 0.3 DATE 02.10.2013 If the product has mass production status, indicated in chapter 25, we will deliver the module in the package which are described below. 19.1 TAPE DIMENSION 19.2 PACKING IN TAPE Empty spaces in component packed area shall be less than two per reel and those spaces shall not be consecutive. Top cover tape shall not be found on reel holes and shall not stick out from reel. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF 19.3 COMPONENT DIRECTION No. DS-1026-2400-102 PAGE 25 of 35 REV. 0.3 DATE 02.10.2013 19.4 REEL DIMENSION PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF 19.5 LABEL FOR PACKAGE The picture shows an example from similar product. No. DS-1026-2400-102 PAGE 26 of 35 REV. 0.3 DATE 02.10.2013 105 mm PAN1315 Customer Code ENW89818C2JF
(1T)
(1P)
(2P)
(9D)
(Q)
(HW/SW) YY WW D L L Example from above:
Lot code [YYWWDLL]
year printed 08 printed 01 normal calendar week day printed 5 (Friday) printed 1 line identifier, if more as one lot identifier per day printed 1 Customer Order Code, if any, otherwise company name will be printed Panasonic Order Code: ENW89837AxKF Date code as [YYWW]
Quantity [XXXX], variable max. 1500 Hardware /Software Release Hardware 01 Software 01 Indicates the HW revision. Indicates the SW revision. 19.6 TOTAL PACKAGE PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF 20 ORDERING INFORMATION No. DS-1026-2400-102 PAGE 27 of 35 REV. 0.3 DATE 02.10.2013 Ordering part number ENW89837A3KF (2) ENW89837A8KF Notes:
Description PAN1026 CLASS 2 Bluetooth dual mode Module according BT-4.0. 115kBaud Standard Bluetooth smart ready device PAN1026 CLASS 2 Bluetooth dual mode Module according BT-4.0. 9k6Baud Bluetooth smart ready device MOQ (1) 1500 1500
(1) Abbreviation for Minimum Order Quantity (MOQ). The standard MOQ for mass production is 1500 pieces, fewer only on customer demand. Samples for evaluation can be delivered at any quantity via the distribution channels.
(2) Samples are available on customer demand 21 INFORMATION REGARDING SOFTWARE VERSIONS The version number of the embedded software can be read out by an extended HCI command. The extended HCI command class < HCI_M2_Message_Get >" allows the reading of the firmware version. Pls refer to the extended HCI command list of TC35661 LSI. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 22 SOFTWARE PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF No. DS-1026-2400-102 PAGE 28 of 35 REV. 0.3 DATE 02.10.2013 The module software offers both embedded Bluetooth HCI (Host Control Interface), extended HCI and TCU (Toshiba Control Unit) Command interfaces via the embedded UART interface a) HCI commands are standard according to Bluetooth standard specifications. b) Extended HCI commands are available for device control, such as RF control, BD_ADDR control, firmware version control, embedded IO control, maintenance tasks etc. Please refer to the Extension HCI Command Document. c) The PAN1026 includes the Bluetooth LSI TC35661 incorporating Bluetooth stack and SPP profile and BLE GATT profile. The profile application interface is described in the SPP Command Interface Document (about 14 commands) and the Bluetooth Basic Management Command Interface Document (about 46 commands). The related high level commands are called TCU commands. The SPP Message Sequence Chart Document and the Bluetooth Management Message Sequence Chart Document describe the logical and sequential procedure to use those commands. d) After RESET of the module, the module starts in HCI mode. The Bluetooth LSI TC35661 Application Note describes how to start the device and enter into TCU mode thereafter. e) The LSI Supplier (Toshiba) offers SPP drivers, that allows a further abstraction towards the application software including SPP programming examples. This is documented in the BT SPP API Specification, the BT SPP Driver Specification and the BT SPP Application Note. The SPP API offers a few high-level APIs for LSI initialization, connection setup and communication with a remote SPP device. The user has full control over all LSI features by utilizing the lower-level SPP Drivers. The drivers take care for issuing commands and data to the LSI and they handle the responses from the TC36661. The Application Note includes a SPP programming example and shows the integration with a RTOS. All documents are available on respective Panasonic or Toshiba websites. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF 23 SOFTWARE BLOCK DIAGRAM No. DS-1026-2400-102 PAGE 29 of 35 REV. 0.3 DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF 24 ROHS AND REACH DECLARATION No. DS-1026-2400-102 PAGE 30 of 35 REV. 0.3 DATE 02.10.2013 Hereby we declare to our best present knowledge based on declaration of our suppliers that this product follows the latest official RoHS and REACH Directive. For the most updated one, please refer to [5]. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 25 DATA SHEET STATUS PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF No. DS-1026-2400-102 PAGE 31 of 35 REV. 0.3 DATE 02.10.2013 This data sheet contains the preliminary specification. Panasonic reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Please consult the most recently issued data sheet before initiating or completing a design. Use this URL to search for the most recent version of this data sheet: PAN1026 Datasheet 26 HISTORY FOR THIS DOCUMENT Revision Date Modification / Remarks November 2012 January 2013 October 2013 1st preliminary version. Update chapter 24 with the latest declaration. Correct chapter 10.3 with the latest current values measured on the reference design. Made the description for the USB ports in chapter 6.2 more precised. Editoral changes. 0.1 0.2 0.3 27 RELATED DOCUMENTS For an update, please search in the suitable homepage.
[1] PAN1026ETU Design-Guide http://www.pideu.panasonic.de/pdf/185ApplicationNote.pdf
[2] EasySPP Evaluation Software http://pideu.panasonic.de/pdf/185ext.zip
[3] Semiconductor Website: http://www.toshiba-components.com/bluetooth/index.html
[4] Application Note Land Grid Array http://www.pideu.panasonic.de/pdf/184ext.pdf
[5] REACH and RoHS Certificate http://www.pideu.panasonic.de/pdf/182ext2.jpg PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF 28 GENERAL INFORMATION No. DS-1026-2400-102 PAGE 32 of 35 REV. 0.3 DATE 02.10.2013 Panasonic Industrial Devices Europe GmbH 2012. All rights reserved. This product description does not lodge the claim to be complete and free of mistakes. Please contact the related product manager in every case. If we deliver ES samples to the customer, these samples have the status Engineering Samples. This means, the design of this product is not yet concluded. Engineering Samples may be partially or fully functional, and there may be differences to be published Data Sheet. Engineering Samples are not qualified and are not to be used for reliability testing or series production. Disclaimer:
Customer acknowledges that samples may deviate from the Data Sheet and may bear defects due to their status of development and the lack of qualification mentioned above. Panasonic rejects any liability or product warranty for Engineering Samples. In particular, Panasonic disclaims liability for damages caused by the use of the Engineering Sample other than for Evaluation Purposes, particularly the installation or integration in an other product to be sold by Customer, deviation or lapse in function of Engineering Sample, Improper use of Engineering Samples. Panasonic disclaimes any liability for consequential and incidental damages. In case of any questions, please contact your local sales partner or the related product manager. 29 REGULATORY INFORMATION 29.1 FCC NOTICE The devices PAN1026, for details refer to Chapter 20, including the antennas, which are listed in 29.5, complies with Part 15 of the FCC Rules. The device meets the requirements for modular transmitter approval as detailed in FCC public Notice DA00-1407.transmitter Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference operation. undesired cause may that 29.2 CAUTION The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Panasonic Industrial Devices Europe GmbH may void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF No. DS-1026-2400-102 PAGE 33 of 35 REV. 0.3 DATE 02.10.2013 Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the Increase the separation between the equipment and receiver. receiver is connected. Consult the dealer or an experienced radio/TV technician for help 29.3 LABELING REQUIREMENTS The Original Equipment Manufacturer (OEM) must ensure that FCC labelling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate Panasonic FCC identifier for this product as well as the FCC Notice above. The FCC identifier is FCC ID: T7VPAN10. This FCC identifier is valid for all PAN1026 modules, for details, see the Chapter 20 - Ordering Information. In
"Contains FCC ID: T7VPAN10"
product must labelled exterior case with end any the be 29.4 ANTENNA WARNING For the related part number of PAN1026 refer to Chapter 20 - Ordering Information. This device is tested with a standard SMA connector and with the antennas listed below. When integrated in the OEMs product, these fixed antennas require installation preventing end-users from replacing them with non-approved antennas. Any antenna not in the following table must be tested to comply with FCC Section 15.203 for unique antenna connectors and Section 15.247 for emissions. 29.5 APPROVED ANTENNA LIST Note: We are able to qualify your antenna and will add to this list as that process is completed. Item Part Number Manufacturer Frequency Band Type Gain (dBi) 1 LDA212G3110K Murata 2.4GHz Chip-Antenna
+0.9 29.6 RF EXPOSURE PAN1026 To comply with FCC RF Exposure requirements, the Original Equipment Manufacturer
(OEM) must ensure that the approved antenna in the previous table must be installed. The preceding statement must be included as a CAUTION statement in manuals for products operating with the approved antennas in the previous table to alert users on FCC RF Exposure compliance. Any notification to the end user of installation or removal instructions about the integrated radio module is not allowed. The ceramic antenna
(FCC ID: T7VPAN10) is far below the FCC radio frequency exposure limits. Nevertheless, the PAN1026 shall be used in such a manner that the potential for human contact during normal operation is minimized. End users may not be provided with the module installation instructions. OEM integrators and end users must be provided with transmitter operating conditions for satisfying RF exposure compliance. radiated output power of PAN1026 with mounted PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF 30 INDUSTRY CANADA CERTIFICATION No. DS-1026-2400-102 PAGE 34 of 35 REV. 0.3 DATE 02.10.2013 PAN1026 is licensed to meet the regulatory requirements of Industry Canada (IC), license: IC: 216Q-PAN10 Manufacturers of mobile, fixed or portable devices incorporating this module are advised to clarify any regulatory questions and ensure compliance for SAR and/or RF exposure limits. Users can obtain Canadian information on RF exposure and compliance from www.ic.gc.ca. This device has been designed to operate with the antennas listed in Table 20 above, having a maximum gain of 0.9 dBi. Antennas not included in this list or having a gain greater than 0.9 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Due to the model size the IC identifier is displayed in the installation instruction only and can not be displayed on the modules label due to the limited size (8.7x15.6mm). 30.1 IC NOTICE modular The devices PAN1026, for details refer to Chapter 20, including the antennas, which are listed in 29.5, complies with Canada RSS-GEN Rules. The device meets the requirements for RSS-GEN. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference operation. transmitter undesired approval detailed cause may that as in 30.2 LABELING REQUIREMENTS The Original Equipment Manufacturer (OEM) must ensure that IC labelling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate Panasonic IC identifier for this product as well as the IC Notice above. The IC identifier is 216Q-PAN10. This IC identifier is valid for all PAN1026 modules, for details, see the Chapter 20 - Ordering Information. In
"Contains IC: 216Q-PAN10"
product must labelled exterior case with end any the be 31 EUROPEAN R&TTE DECLARATION OF CONFORMITY Hereby, Panasonic Industrial Devices Europe GmbH, declares that the Bluetooth module PAN1026 and their versions is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. As a result of the conformity assessment procedure described in Annex III of the Directive 1999/5/EC, the end-customer equipment should be labelled as follows:
All versions of the PAN1026 in the specified reference design can be used in the following countries: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, The Netherlands, the United Kingdom, Switzerland, and Norway. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION SUBJECT CUSTOMERS CODE PAN1026 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PANASONICS CODE ENW89837AxKF 32 LIFE SUPPORT POLICY No. DS-1026-2400-102 PAGE 35 of 35 REV. 0.3 DATE 02.10.2013 This Panasonic product is not designed for use in life support appliances, devices, or systems where malfunction can reasonably be expected to result in a significant personal injury to the user, or as a critical component in any life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Panasonic customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panasonic for any damages resulting. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
1 2 3 4 | User manual | Users Manual | 956.20 KiB |
PAN1026A Bluetooth Basic Data Rate and Low Energy Module Product Specification Rev. 0.1 Wireless Modules PAN1026A Bluetooth Module Overview New Features The PAN1026A is a Class 2 Bluetooth 4.2 Basic Data Rate and Low Energy module for easy implementation of Bluetooth functionality into various electronic devices. Features Bluetooth 4.2 Basic Data Rate (BR) and Low Energy (LE) Embedded SPP profile Embedded GATT profile High-level API commands Bluetooth 4.2 (LE) embedded GATT profile with high-level API commands, compatible with Toshiba reference BLE profiles Operational temperature range -40 to +85 C Operational voltage 2.7 V to 3.6 V +/- 10 %
Power consumption Tx: 46 mA Dimensions 15.6 x 8.7 x 1.9 mm Output power 4 dBm
-88 dBm sensitivity Integrated high speed crystal oscillator (26 MHz) Block Diagram Increased (2.5 x) BLE data transfer rates through extended MTU size (64 bytes to 160 bytes) More complex BLE profiles possible through extended GATT functionality Data base pool, number of services and characteristics, data flow control Fast SPP classic connection/disconnection times Interlaced inquiry/page scan & extended inquiry response Transmission (Tx) power control Improved PER (peak-error-rate) for BLE traffic Integration of BT 4.2 secure connecting feature implementing ECDH technology Bluetooth GAP support for SPP GAP Peripheral and Broadcast support for LE GATT server and client mode support for LE GAP Central and Observer not supported for LE Interfaces UART, GPIO (10 input/output pins), wake-up control pins Product Specification Rev. 0.1 Page 2 ChipantennaToshibaTC35661EEPROM32 kbitUARTGPIOsHost wake upReset32 kHz inputWake up Vcc 3.3 VLPFPAN1026ABluetooth 4.2 ModuleCrystal26 MHz PAN1026A Bluetooth Module By purchase of any of the products described in this document the customer accepts the document's validity and declares their agreement and understanding of its contents and recommendations. Panasonic reserves the right to make changes as required at any time without notification. Please consult the most recently issued Product Specification before initiating or completing a design. Panasonic Industrial Devices Europe GmbH 2017. This specification sheet is copyrighted. Reproduction of this document is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Do not disclose it to a third party. All rights reserved. This Product Specification does not lodge the claim to be complete and free of mistakes. Engineering Samples (ES) If Engineering Samples are delivered to the customer, these samples have the status Engineering Samples. This means that the design of this product is not yet concluded. Engineering Samples may be partially or fully functional, and they may differ from the published Product Specification. Engineering Samples are not qualified and they are not to be used for reliability testing or series production. Disclaimer The customer acknowledges that samples may deviate from the Product Specification and may bear defects due to their status of development and the lack of qualification mentioned above. Panasonic rejects any liability or product warranty for Engineering Samples. In particular, Panasonic disclaims liability for damages caused by:
The use of the Engineering Sample other than for evaluation purposes, particularly the installation or integration in another product to be sold by the customer, Deviation or lapse in function of the Engineering Sample, Improper use of the Engineering Sample. Panasonic Industrial Devices Europe GmbH disclaims any liability for consequential and incidental damages. In case of any queries regarding the Engineering Samples, please contact your local sales partner or the related product manager. Product Specification Rev. 0.1 Page 3 PAN1026A Bluetooth Module Table of Contents 4 3 1 About This Document ......................................................................................................................... 5 Purpose and Audience .............................................................................................................. 5 1.1 Revision History ......................................................................................................................... 5 1.2 1.3 Use of Symbols ......................................................................................................................... 5 Related Documents ................................................................................................................... 5 1.4 2 Overview .............................................................................................................................................. 6 Block Diagram ........................................................................................................................... 7 2.1 Pin Configuration ....................................................................................................................... 8 2.2 UART Interface ........................................................................................................................ 10 2.3 2.4 Bluetooth Features .................................................................................................................. 10 Detailed Description ......................................................................................................................... 11 Dimensions .............................................................................................................................. 11 3.1 Footprint .................................................................................................................................. 12 3.2 3.3 Packaging ................................................................................................................................ 13 3.4 Case Marking .......................................................................................................................... 16 Specification ..................................................................................................................................... 17 Default Test Conditions ........................................................................................................... 17 4.1 4.2 Absolute Maximum Ratings ..................................................................................................... 17 Recommended Operating Conditions ...................................................................................... 18 4.3 Current Consumption............................................................................................................... 18 4.4 Bluetooth ................................................................................................................................. 19 4.5 4.6 Reliability Tests ....................................................................................................................... 19 4.7 Recommended Soldering Profile ............................................................................................. 20 Cautions ............................................................................................................................................ 21 5.1 Design Notes ........................................................................................................................... 21 Installation Notes ..................................................................................................................... 21 5.2 Usage Condition Notes ............................................................................................................ 22 5.3 5.4 Storage Notes .......................................................................................................................... 22 5.5 Safety Cautions ....................................................................................................................... 22 5.6 Other Cautions ........................................................................................................................ 23 5.7 Life Support Policy ................................................................................................................... 23 Regulatory and Certification Information ....................................................................................... 24 RoHS and REACH Declaration ............................................................................................... 24 6.1 Federal Communications Commission (FCC) for US .............................................................. 24 6.2 6.3 Industry Canada Certification .................................................................................................. 26 European Conformity According to RED (2014/53/EU) ........................................................... 29 6.4 6.5 Japanese Radio Law Compliance ........................................................................................... 29 Appendix ........................................................................................................................................... 30 7.1 Ordering Information ................................................................................................................ 30 Contact Details ........................................................................................................................ 31 7.2 7 5 6 Product Specification Rev. 0.1 Page 4 PAN1026A Bluetooth Module 1 About This Document 1 About This Document 1.1 Purpose and Audience This Product Specification provides details on the functional, operational, and electrical characteristics of the Panasonic PAN1026A module. It is intended for hardware design, application, and Original Equipment Manufacturers (OEM) engineers. The product is referred to as the PAN1026A or the module within this document. 1.2 Revision History Revision Date Modifications/Remarks 0.1 23.03.2017 1st preliminary version. 1.3 Use of Symbols Symbol Description Note Indicates important information for the proper use of the product. Non-observance can lead to errors. Attention Indicates important notes that, if not observed, can put the products functionality at risk.
[chapter number]
[chapter title]
Cross reference Indicates crossreferences within the document. Example:
Description of the symbols used in this document 1.3 Use of Symbols. 1.4 Related Documents Please refer to the Panasonic website for related documents 7.2.2 Product Information. Product Specification Rev. 0.1 Page 5 PAN1026A Bluetooth Module 2 Overview 2 Overview The PAN1026A is based on Toshibas single-chip TC35661 Bluetooth semiconductor device with an embedded Toshiba Bluetooth SIG certified stack. The PAN1026A is a highly integrated Dual Mode Bluetooth controller that delivers high-speed operation at ultra-low power consumption. An embedded SPP (Serial Port Profile of Bluetooth Classic) and a GATT (Generic Attribute Profile of Bluetooth LE) stack are integrated. The module significantly reduces external component count and power consumption in applications requiring support of Bluetooth 4.2 standards. EDR (Enhanced Data Rate) or Central Mode are not supported. Details about iAP integration can be provided on request. The integrated EEPROM has a Panasonic MAC address and it can be used to store link keys. The module allows for serving both legacy Bluetooth Classic and Bluetooth Low Energy connections with rapid connection and disconnection, needed by a wide range of applications, all at a small form factor. Compared to the PAN1026, the PAN1026A has additional features for secure connections via Bluetooth LE and it is fully backwards compatible. Next to increased low energy transfer speed, transmission power can also be controlled. The PAN1026A module is manufactured in a small 15.6 x 8.7 x 1.9 mm SMD package with a shielded case and it is qualified according to the Bluetooth 2.1 and 4.2 standards. Please refer to the Panasonic website for related documents 7.2.2 Product Information. Further information on the variants and versions 7.1 Ordering Information. Product Specification Rev. 0.1 Page 6 PAN1026A Bluetooth Module 2 Overview 2.1 Block Diagram Total capacitor value: 6.7 F +/-10 %
Total inductance:
2 NH +/-10 %
Total resistance:
220 K +/-10 %
Product Specification Rev. 0.1 Page 7 ChipantennaToshibaTC35661EEPROM32 kbitUARTGPIOsHost wake upReset32 kHz inputWake up Vcc 3.3 VLPFPAN1026ABluetooth 4.2 ModuleCrystal26 MHz PAN1026A Bluetooth Module 2 Overview Top View 2.2 Pin Configuration Pin Assignment Pin Functions No Pin Name GPIO No Pin Type Description A1 GND A2 NC A3 Reset A4 VCC A5 VCC A6 VCC A7 GND A8 NC A9 GND A11 GND A12 GND Ground Pin Connect to ground NC Not connected, leave open Digital Input Reset, active low Power analog/digital power supply connection Power analog/digital power supply connection Power analog/digital power supply connection Ground Pin Connect to ground NC Not connected Ground Pin Connect to ground Ground Pin Connect to ground Ground Pin Connect to ground Product Specification Rev. 0.1 Page 8 F2F3F4F5E1E2E3E4E5E6E7E8E9D1D2D3D4D5D6D7D8C1C2C3C4C5C6C7C8B1B2B3B4B5B6B7B8B9A2A3A4A5A6A7A8A11.08.70 mm0.65.00.61.351.351.2F91.2F7F1F8D9C9A915.6 mmF6F11A11F12A122.4 PAN1026A Bluetooth Module 2 Overview No Pin Name GPIO No Pin Type Description B1 NC B2 BTS B3 BTA B4 NC B5 NC B6 NC B7 NC B8 NC B9 NC C1 CS0X C2 BTI C3 WIA C4 NC C5 NC NC Not connected, leave open GPIO 11 GPIO 10 GPIO 17 GPIO 13 GPIO 12 NC NC NC NC NC NC NC NC Not connected, leave open Not connected, leave open Not connected, leave open Not connected, leave open Not connected, leave open Not connected, leave open Not connected, leave open Not connected, leave open C6 PCMCLK GPIO 04 Digital I/O PCM clock C7 FSYNC GPIO 05 Digital I/O PCM synchronization C8 GND C9 GND D1 CS1X D2 DIN D3 GPIO1 D4 GPIO0 D5 NC Ground Pin Connect to ground Ground Pin Connect to ground GPIO 18 GPIO 16 GPIO 01 Digital I/O Digital I/O NC Not connected, leave open D6 PCMIN GPIO 03 Digital Input PCM In: Not supported D7 GND D8 GND D9 ANT E1 SDA E2 SCL E3 GND E4 USB E5 CLKREQ E6 UART RXD Ground Pin Connect to ground Ground Pin Connect to ground RF-Signal Antenna pin (not connected for standard version) GPIO 15 Digital I/O I2C interface (only internal), connect to test pin GPIO 14 Digital I/O I2C interface (only internal), connect to test pin Ground Pin Connect to ground USB direct is not supported by the IC. Leave this pin open. Digital Output Active high once crystal frequency is stable Digital Input UART RXD Product Specification Rev. 0.1 Page 9 PAN1026A Bluetooth Module 2 Overview No Pin Name GPIO No Pin Type Description E7 PCMOUT GPIO 02 Digital Output PCM Output: not supported E8 GND E9 GND F1 GND F2 EEPROM_WP F3 GND F4 GND F5 UART CTS F6 SLEEPCLK F7 UARTTXD F8 UARTRTS F9 GND F11 GND F12 GND Ground Pin Connect to ground Ground Pin Connect to ground Ground Pin Connect to ground Digital Input Internal EEPROM Write Protect (active high) Ground Pin Connect to ground Ground Pin Connect to ground Digital Input UART CTS Digital Input Input clock for 32.768 KHz Digital Output UART TX Digital Output UART RTS Ground Pin Connect to ground Ground Pin Connect to ground Ground Pin Connect to ground 2.3 UART Interface Full-duplex 4-wire data transfer: RX, TX, RTS, CTS Programmable baud rate: 2 400 bps to 4.33 Mbps Default baud rate: 115 200 bps Data format: 8N1, LSB first Error detection: Character timeout, Overrun error, Framing error 2.4 Bluetooth Features Bluetooth 4.0 with SPP & GATT GAP support for SPP GATT server and client mode supported for LE Class 2 TX power w/o external PA (improved link robustness) Excellent link budget (up to 91 dB), enabling long-range applications GAP peripheral support for LE Product Specification Rev. 0.1 Page 10 PAN1026A Bluetooth Module 3 Detailed Description 3 Detailed Description 3.1 Dimensions All dimensions are in millimeters. No. Item Dimension Tolerance Remark 1 Width 2 Length 3 Height 8.70 15.60 1.80 0.20 0.20 0.20 With case Product Specification Rev. 0.1 Page 11 PAN1026A Bluetooth Module 3 Detailed Description 3.2 Footprint The outer dimensions have a tolerance of 0.3 mm. Top View Product Specification Rev. 0.1 Page 12 F2F3F4F5E1E2E3E4E5E6E7E8E9D1D2D3D4D5D6D7D8C1C2C3C4C5C6C7C8B1B2B3B4B5B6B7B8B9A2A3A4A5A6A7A8A11.08.70 mm0.65.00.61.351.351.2F91.2F7F1F8D9C9A915.6 mmF6F11A11F12A122.4 PAN1026A Bluetooth Module 3 Detailed Description 3.3 Packaging The product is a mass production status product and will be delivered in the package described below. 3.3.1 Tape Dimensions 3.3.2 Packing in Tape Empty spaces in the component packed area shall be less than two per reel and those spaces shall not be consecutive. The top cover tape shall not be found on reel holes and it shall not stick out from the reel. Product Specification Rev. 0.1 Page 13 100730-PAN1720.vsdtrailer (empty)1 x circumference /hub(min 160mm)component packed areastandard 1500pcsleader (empty)minimum 10 pitchTop cover tape more than 1 x circumference plus 100mm to avoid fixing of tape end on sealed modules.Direction of unreeling (for customer) PAN1026A Bluetooth Module 3 Detailed Description 3.3.3 Component Direction 3.3.4 Reel Dimension Product Specification Rev. 0.1 Page 14 PAN1026A Bluetooth Module 3 Detailed Description 3.3.5 Package Label Example 3.3.6 Total Package
(1T)
(1P)
(2P)
(9D)
(Q)
(HW/SW) Lot code Customer order number, if applicable Order number Date code Quantity Hardware/software version Product Specification Rev. 0.1 Page 15 3.4 Case Marking Example 1 2 3 4 5 6 7 8 9 PAN1026A Bluetooth Module 3 Detailed Description MIC ID Brand name Hardware/software version Order number FCC ID Lot code Engineering Sample marking, if applicable Marking for Pin 1 2D barcode, for internal usage only Product Specification Rev. 0.1 Page 16 PAN1026A Bluetooth Module 4 Specification 4 Specification All specifications are over temperature and process, unless indicated otherwise. 4.1 Default Test Conditions Temperature:
Humidity:
Supply Voltage:
25 10 C 40 to 85 % RH 3.3 V 4.2 Absolute Maximum Ratings The maximum ratings may not be exceeded under any circumstances, not even momentarily or individually, as permanent damage to the module may result. Symbol Parameter Condition Min. Typ. Max. Units TSTOR VESD PRF VDIG Storage temperature ESD robustness All pads, according to human body model (HBM), JEDEC STD 22, method A114 According to charged device model (CDM), JEDEC STD 22, method C101 RF input level Voltage on any digital pins
-40
+125 C
-0.3 1 000 V 500 V
+10 dBm VDD +
0.3 V Product Specification Rev. 0.1 Page 17 PAN1026A Bluetooth Module 4 Specification 4.3 Recommended Operating Conditions The maximum ratings may not be exceeded under any circumstances, not even momentarily or individually, as permanent damage to the module may result. Symbol Parameter Condition Min. Typ. Max. Units TA VDD Ambient operating temperature range 3V3 Supply voltage
-40
+85 C 2.7 3.3 3.6 V 4.4 Current Consumption The current consumption depends on the user scenario and on the setup and timing in the power modes. Assume VDD = 3.3 V, Tamb = 25 C, if nothing else stated. Parameter Condition Min. Typ. Max. Idle Current After reset was pulled down. Connected Peak Power Connected Peak Power Connected Peak Power Sleep mode activated Sending DH5 packets. Max. output power. Sending DH3 packets. Max. output power. Sending DH1 packets. Max. output power. Sniff mode/not connected/BLE Advertising Units mA 62 mA 61 mA 55 mA 7.8 2 mA Product Specification Rev. 0.1 Page 18 PAN1026A Bluetooth Module 4 Specification 4.5 Bluetooth Parameter Condition Operation frequency range Channel spacing BT-Classic/BLE Output Power Maximum setting, measured at dual ended 50 ohm. Sensitivity Symbol Parameter Condition Min. 1 Spurious emissions Conducted measurement with a 50 dual-ended load. Complies with EN 300 328, EN 300 440 class 2, FCC CFR47, Part 15 and ARIB STD-
T-66. Min. Typ. 2 402 Max. Units 2 480 MHz 1/2 4
-88 MHz dBm dBm Typ. Max. Units
<-30 dBm 4.6 Reliability Tests The measurement should be done after the test device has been exposed to room temperature and humidity for one hour. No. Item Limit Condition 1 Vibration test Electrical parameter should be in specification 2 Shock test See above 3 Heat cycle test See above Freq.: 10~50 Hz; Amplitude: 1.5 mm;
20 min./cycle, 1 hrs. each of XYZ axis Freq.: 30~100 Hz, 6G; 20 min./cycle, 1 hrs. each of XYZ axis Dropped onto hard wood from a height of 50 cm for 3 times
-40 C for 30 min. and +85 C for 30 min.; each temperature 300 cycles 4 Moisture test See above
+60 C, 90 % RH, 300 h 5 Low See above
-40 C, 300 h temperature test 6 High temp. test See above
+85 C, 300 h Product Specification Rev. 0.1 Page 19 PAN1026A Bluetooth Module 4 Specification 4.7 Recommended Soldering Profile Reflow permissible cycle: 2 Opposite side reflow is prohibited due to module weight More than 75 percent of the soldering area shall be coated by solder The soldering profiles should be adhered to in order to prevent electrical or mechanical damage Soldering profile assumes lead-free soldering Product Specification Rev. 0.1 Page 20 PAN1026A Bluetooth Module 5 Cautions 5 Cautions Failure to follow the guidelines set forth in this document may result in degrading of the products functions and damage to the product. 5.1 Design Notes 1. Follow the conditions written in this specification, especially the control signals of this module. 2. The supply voltage must be free of AC ripple voltage (for example from a battery or a low noise regulator output). For noisy supply voltages, provide a decoupling circuit (for example a ferrite in series connection and a bypass capacitor to ground of at least 47 F directly at the module). 3. This product should not be mechanically stressed when installed. 4. Keep this product away from heat. Heat is the major cause of decreasing the life of these products. 5. Avoid assembly and use of the target equipment in conditions where the products temperature may exceed the maximum tolerance. 6. The supply voltage should not be exceedingly high or reversed. It should not carry noise and/or spikes. 7. Keep this product away from other high frequency circuits. 8. Refer to the recommended pattern when designing a board. 5.2 Installation Notes 1. Reflow soldering is possible twice based on the conditions set forth in 4.7 Recommended Soldering Profile. Set up the temperature at the soldering portion of this product according to this reflow profile. 2. Carefully position the products so that their heat will not burn into printed circuit boards or affect the other components that are susceptible to heat. 3. Carefully locate these products so that their temperatures will not increase due to the effects of heat generated by neighboring components. 4. If a vinyl-covered wire comes into contact with the products, then the cover will melt and generate toxic gas, damaging the insulation. Never allow contact between the cover and these products to occur. 5. This product should not be mechanically stressed or vibrated when reflowed. 6. To repair the board by hand soldering, follow the conditions set forth in this chapter. 7. Do not wash this product. 8. Pressing on parts of the metal cover or fastening objects to the metal will cause damage to the unit. Product Specification Rev. 0.1 Page 21 PAN1026A Bluetooth Module 5 Cautions 5.3 Usage Condition Notes 1. Take measures to protect the unit against static electricity. If pulses or other transient loads (a large load applied in a short time) are applied to the products, check and evaluate their operation befor assembly on the final products. 2. Do not use dropped products. 3. Do not touch, damage or soil the pins. 4. Follow the recommended condition ratings about the power supply applied to this product. 5. Electrode peeling strength: Do not add pressure of more than 4.9 N when soldered on PCB. 6. Pressing on parts of the metal cover or fastening objects to the metal cover will cause damage. 7. These products are intended for general purpose and standard use in general electronic equipment, such as home appliances, office equipment, information, and communication equipment. 5.4 Storage Notes 1. The module should not be stressed mechanically during storage. 2. Do not store these products in the following conditions or the performance characteristics of the product, such as RF performance will be adversely affected:
Storage in salty air or in an environment with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NOX, Storage in direct sunlight, Storage in an environment where the temperature may be outside the range of 5 C to 35 C, or where the humidity may be outside the 45 to 85 percent range, Storage of the products for more than one year after the date of delivery storage period: Please check the adhesive strength of the embossed tape and soldering after 6 months of storage. 3. Keep this product away from water, poisonous gas, and corrosive gas. 4. This product should not be stressed or shocked when transported. 5. Follow the specification when stacking packed crates (max. 10). 5.5 Safety Cautions These specifications are intended to preserve the quality assurance of products and individual components. Before use, check and evaluate the operation when mounted on your products. Abide by these specifications without deviation when using the products. These products may short-circuit. If electrical shocks, smoke, fire, and/or accidents involving human life are anticipated when a short circuit occurs, provide the following failsafe functions as a minimum:
Product Specification Rev. 0.1 Page 22 PAN1026A Bluetooth Module 5 Cautions 1. Ensure the safety of the whole system by installing a protection circuit and a protection device. 2. Ensure the safety of the whole system by installing a redundant circuit or another system to prevent a single fault causing an unsafe status. 5.6 Other Cautions 1. Do not use the products for other purposes than those listed. 2. Be sure to provide an appropriate fail-safe function on your product to prevent any additional damage that may be caused by the abnormal function or the failure of the product. 3. This product has been manufactured without any ozone chemical controlled under the Montreal Protocol. 4. These products are not intended for uses other than under the special conditions shown below. Before using these products under such special conditions, carefully check their performance and reliability under the said special conditions to determine whether or not they can be used in such a manner:
In liquid, such as water, salt water, oil, alkali, or organic solvent, or in places where liquid may splash. In direct sunlight, outdoors, or in a dusty environment. In an environment where condensation occurs. In an environment with a high concentration of harmful gas (e. g. salty air, HCl, Cl2, SO2, H2S, NH3, and NOX). 5. If an abnormal voltage is applied due to a problem occurring in other components or circuits, replace these products with new products because they may not be able to provide normal performance even if their electronic characteristics and appearances appear satisfactory. 6. When you have any question or uncertainty, contact Panasonic. 5.7 Life Support Policy This Panasonic Industrial Devices Europe GmbH product is not designed for use in life support appliances, devices, or systems where malfunction can reasonably be expected to result in a significant personal injury to the user, or as a critical component in any life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Panasonic customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panasonic Industrial Devices Europe GmbH for any damages resulting. Product Specification Rev. 0.1 Page 23 PAN1026A Bluetooth Module 6 Regulatory and Certification Information 6 Regulatory and Certification Information 6.1 RoHS and REACH Declaration The latest declaration of environmental compatibility (Restriction of Hazardous Substances, RoHS and Registration, Evaluation, Authorisation, and Restriction of Chemicals, REACH) for supplied products can be found on the Panasonic website in the Downloads section of the respective product 7.2.2 Product Information. 6.2 Federal Communications Commission (FCC) for US 6.2.1 FCC Notice The PAN1026A including the antennas, which are listed in 6.2.5 Approved Antenna List, complies with Part 15 of the FCC Rules. The device meets the requirements for modular transmitter approval as detailed in FCC public Notice DA00-1407. The transmitter operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. 6.2.2 Caution The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Panasonic Industrial Devices Europe GmbH may void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Product Specification Rev. 0.1 Page 24 PAN1026A Bluetooth Module 6 Regulatory and Certification Information However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is Increase the separation between the equipment and receiver. connected. Consult the dealer or an experienced radio/TV technician for help 6.2.3 Label Requirements The OEM must ensure that FCC labelling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate Panasonic FCC identifier for this product as well as the FCC Notice above. The FCC identifier is FCC ID: T7VPAN10. This FCC identifier is valid for the PAN1026A. The end product must in any case be labelled on the exterior with:
"Contains FCC ID: T7VPAN10"
6.2.4 Antenna Warning This antenna warning refers to the test device with the model number PAN1026A Chapter 7.1 Ordering Information The device is tested with a standard SMA connector and with the antenna listed below. When integrated into the OEMs product, these fixed antennas require installation preventing end users from replacing them with non-approved antennas. Any antenna not in the following table must be tested to comply with FCC Section 15.203 for unique antenna connectors and with Section 15.247 for emissions. The FCC identifier for the device with the antenna listed in 6.2.5 Approved Antenna List is the same (FCC ID: T7VPAN10). 6.2.5 Approved Antenna List Item Part Number Manufacturer Frequency Band Type Gain (dBi) LDA212G3110K ANT2012 Murata Yageo 2.4 GHz 2.4GHz Chip antenna
+0.9 Chip-Antenna
+0.9 1 2 Product Specification Rev. 0.1 Page 25 PAN1026A Bluetooth Module 6 Regulatory and Certification Information 6.2.6 RF Exposure To comply with FCC RF Exposure requirements, the OEM must ensure that only antennas from the Approved Antenna List are installed 6.2.5 Approved Antenna List. The preceding statement must be included as a CAUTION statement in manuals for products operating with the approved antennas in the previous table to alert users on FCC RF Exposure compliance. Any notification to the end user of installation or removal instructions about the integrated radio module is not allowed. The radiated output power of the PAN1026A with a mounted ceramic antenna
(FCC ID: T7VPAN10) is below the FCC radio frequency exposure limits. Nevertheless, the PAN1026A shall be used in such a manner that the potential for human contact during normal operation is minimized. End users may not be provided with the module installation instructions. OEM integrators and end users must be provided with transmitter operating conditions for satisfying RF exposure compliance. 6.3 Industry Canada Certification English The PAN1026A is licensed to meet the regulatory requirements of Industry Canada (IC). License ID:
IC: 216Q-PAN10 Manufacturers of mobile, fixed or portable devices incorporating this module are advised to clarify any regulatory questions and ensure compliance for SAR and/or RF exposure limits. Users can obtain Canadian information on RF exposure and compliance from www.ic.gc.ca. This device has been designed to operate with the antennas listed in 6.2.5 Approved Antenna List, having a maximum gain of +0.9 dBi. Antennas not included in this list or having a gain greater than +0.9 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Due to the model size, the IC identifier is displayed in the installation instruction only and it cannot be displayed on the modules label due to the limited size. Product Specification Rev. 0.1 Page 26 PAN1026A Bluetooth Module 6 Regulatory and Certification Information French PAN1026A est garanti conforme aux dispositions rglementaires dIndustry Canada (IC). License:
IC: 216Q-PAN10 Il est recommand aux fabricants dappareils fixes, mobiles ou portables de consulter la rglementation en vigueur et de vrifier la conformit de leurs produits relativement aux limites dexposition aux rayonnements radiofrquence ainsi quau dbit dabsorption spcifique maximum autoris. Des informations pour les utilisateurs sur la rglementation Canadienne concernant lexposition aux rayonnements RF sont disponibles sur le site www.ic.gc.ca. Ce produit a t dvelopp pour fonctionner spcifiquement avec les antennes listes dans le tableau 6.2.5 Approved Antenna List, prsentant un gain maximum de 0.9 dBi. Des antennes autres que celles listes ici, ou prsentant un gain suprieur 0.9 dBi ne doivent en aucune circonstance tre utilises en combinaison avec ce produit. Limpdance des antennes compatibles est 50 Ohm. Lantenne utilise avec ce produit ne doit ni tre situe proximit dune autre antenne ou dun autre metteur, ni tre utilise conjointement avec une autre antenne ou un autre metteur. En raison de la taille du produit, lidentifiant IC est fourni dans le manuel dinstallation. 6.3.1 IC Notice English The device PAN1026A ( 7.1 Ordering Information), including the antennas
( 6.2.5 Approved Antenna List), complies with Canada RSS-GEN Rules. The device meets the requirements for modular transmitter approval as detailed in RSS-Gen. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. French Le prsent appareil PAN1026A ( 7.1 Ordering Information), les antennes y compris ( 6.2.5 Approved Antenna List), est conforme aux CNR-Gen d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
1. l'appareil ne doit pas produire de brouillage, et 2. l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Product Specification Rev. 0.1 Page 27 PAN1026A Bluetooth Module 6 Regulatory and Certification Information 6.3.2 Labeling Requirements English Labeling Requirements French The OEM must ensure that IC labelling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate Panasonic IC identifier for this product as well as the IC Notice above. The IC identifier is:
IC: 216Q-PAN10 This IC identifier is valid for all PAN1026A modules 7.1 Ordering Information. In any case, the end product must be labelled on the exterior with:
"Contains IC: 216Q-PAN10. Obligations dtiquetage Les fabricants dquipements dorigine (FEO) en anglais Original Equipment Manufacturer (OEM) doivent sassurer que les obligations dtiquetage IC du produit final sont remplies. Ces obligations incluent une tiquette clairement visible lextrieur de lemballage externe, comportant lidentifiant IC du module Panasonic inclus, ainsi que la notification ci-dessus. L identifiant IC est:
IC: 216Q-PAN10 Cet identifiant est valide pour tous les modules PAN1026A 7.1 Ordering Information. Dans tous les cas les produits finaux doivent indiquer sur leur emballage externe la mention suivante:
"Contient IC: 216Q-PAN10. Product Specification Rev. 0.1 Page 28 PAN1026A Bluetooth Module 6 Regulatory and Certification Information 6.4 European Conformity According to RED (2014/53/EU) All modules described in this Product Specification comply with the standards according to the following LVD (2014/35/EU), EMC-D (2014/30/EU) together with the RED (2014/53/EU) articles:
3.1a Safety/Health:
EN60950-1:2006+A11:2009+A1:2010+A12:2011+AC:2011+A2:2013 3.1b EMC:
3.2 Radio:
EN62311:2008 EN 301 489-1 V2.1.1:2017-02 EN 301 489-17 V3.1.1:2017-02 EN 300 328 V2.1.1:2016-11 As a result of the conformity assessment procedure described in the 2014/53/EU Directive, the end customer equipment should be labelled as follows:
PAN1026A in the specified reference design can be used in all countries of the European Economic Area (Member States of the EU, European Free Trade Association States [Iceland, Liechtenstein, Norway]), Monaco, San Marino, Andorra and Turkey. 6.5 Japanese Radio Law Compliance This device is granted pursuant to the Japanese Radio Law (). This device should not be modified (otherwise the granted designation number will become invalid). Product Specification Rev. 0.1 Page 29 PAN1026A Bluetooth Module 7 Appendix 7 Appendix 7.1 Ordering Information Variants and Versions Order Number Brand Name Description MOQ1 ENW89837A5KF2 PAN1026A Bluetooth BT4.2 Basic Data Rate and Low Energy module 1 500 1 Abbreviation for Minimum Order Quantity (MOQ). The default MOQ for mass production is 1 500 pieces, fewer only on customer demand. Samples for evaluation can be delivered at any quantity via the distribution channels. 2 Samples are available on customer demand. Product Specification Rev. 0.1 Page 30 PAN1026A Bluetooth Module 7 Appendix 7.2 Contact Details 7.2.1 Contact Us Please contact your local Panasonic Sales office for details on additional product options and services:
For Panasonic Sales assistance in the EU, visit https://eu.industrial.panasonic.com/about-us/contact-us Email: wireless@eu.panasonic.com For Panasonic Sales assistance in North America, visit the Panasonic Sales & Support Tool to find assistance near you at https://na.industrial.panasonic.com/distributors Please visit the Panasonic Wireless Technical Forum to submit a question at https://forum.na.industrial.panasonic.com 7.2.2 Product Information Please refer to the Panasonic Wireless Connectivity website for further information on our products and related documents:
For complete Panasonic product details in the EU, visit http://pideu.panasonic.de/products/wireless-modules.html For complete Panasonic product details in North America, visit http://www.panasonic.com/rfmodules Product Specification Rev. 0.1 Page 31
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2017-08-14 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Class II permissive change or modification of presently authorized equipment |
2 | 2402 ~ 2480 | DTS - Digital Transmission System | ||
3 | 2013-10-29 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
4 | 2402 ~ 2480 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 | Effective |
2017-08-14
|
||||
1 2 3 4 |
2013-10-29
|
|||||
1 2 3 4 | Applicant's complete, legal business name |
Panasonic Industrial Devices Europe GmbH
|
||||
1 2 3 4 | FCC Registration Number (FRN) |
0014980072
|
||||
1 2 3 4 | Physical Address |
Zeppelinstrasse 19
|
||||
1 2 3 4 |
Lueneburg, N/A 21337
|
|||||
1 2 3 4 |
Germany
|
|||||
app s | TCB Information | |||||
1 2 3 4 | TCB Application Email Address |
J******@eurofins.de
|
||||
1 2 3 4 |
j******@eurofins.de
|
|||||
1 2 3 4 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 3 4 | Grantee Code |
T7V
|
||||
1 2 3 4 | Equipment Product Code |
PAN10
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 | Name |
O**** K******
|
||||
1 2 3 4 | Title |
Product Safety
|
||||
1 2 3 4 | Telephone Number |
+49-4******** Extension:
|
||||
1 2 3 4 | Fax Number |
+49-4********
|
||||
1 2 3 4 |
o******@eu.panasonic.com
|
|||||
app s | Technical Contact | |||||
1 2 3 4 | Firm Name |
Panasonic Industrial Devices Europe GmbH
|
||||
1 2 3 4 | Name |
I**** W******
|
||||
1 2 3 4 | Physical Address |
Zeppelinstrasse 19
|
||||
1 2 3 4 |
Lueneburg, 21337
|
|||||
1 2 3 4 |
Germany
|
|||||
1 2 3 4 | Telephone Number |
00494******** Extension:
|
||||
1 2 3 4 |
00494******** Extension:
|
|||||
1 2 3 4 | Fax Number |
00494********
|
||||
1 2 3 4 |
00494********
|
|||||
1 2 3 4 |
I******@eu.panasonic.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 3 4 | DTS - Digital Transmission System | |||||
1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Bluetooth Smart Module | ||||
1 2 3 4 | Bluetooth Module | |||||
1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 4 | Modular Equipment Type | Single Modular Approval | ||||
1 2 3 4 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 3 4 | Original Equipment | |||||
1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 | Grant Comments | Single Modular Approval. Power listed is conducted. This device is to be used for portable and mobile applications. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance, antenna installation and labeling requirements for the final host device. | ||||
1 2 3 4 | Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 5 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | |||||
1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 | Firm Name |
Eurofins Product Service GmbH
|
||||
1 2 3 4 | Name |
J****** K********
|
||||
1 2 3 4 |
R**** K****
|
|||||
1 2 3 4 | Telephone Number |
49-33********
|
||||
1 2 3 4 |
49-33********
|
|||||
1 2 3 4 | Fax Number |
49-33********
|
||||
1 2 3 4 |
49-33********
|
|||||
1 2 3 4 |
j******@eurofins.de
|
|||||
1 2 3 4 |
r******@eurofins.de
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0010000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0010000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0010000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0010000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC