all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
photos | labels |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 5 6 |
|
IntPho | Internal Photos | 1.59 MiB | September 23 2021 | |||
1 2 3 4 5 6 |
|
ExtPho | External Photos | 256.41 KiB | September 23 2021 | |||
1 2 3 4 5 6 |
|
Label-in UserMan | ID Label/Location Info | 2.22 MiB | September 23 2021 | |||
1 2 3 4 5 6 |
|
LabelExemption | ID Label/Location Info | 330.45 KiB | September 23 2021 | |||
1 2 3 4 5 6 | AntSpec | Operational Description | September 23 2021 | confidential | ||||
1 2 3 4 5 6 |
|
AutLet | Cover Letter(s) | 50.60 KiB | September 23 2021 | |||
1 2 3 4 5 6 | BlkDia | Block Diagram | September 23 2021 | confidential | ||||
1 2 3 4 5 6 |
|
ConReq | Cover Letter(s) | 74.17 KiB | September 23 2021 | |||
1 2 3 4 5 6 |
|
MAL | Cover Letter(s) | 123.07 KiB | September 23 2021 | |||
1 2 3 4 5 6 | OpDes | Operational Description | September 23 2021 | confidential | ||||
1 2 3 4 5 6 | PartLst | Parts List/Tune Up Info | September 23 2021 | confidential | ||||
1 2 3 4 5 6 |
|
RFExp | RF Exposure Info | 855.64 KiB | September 23 2021 | |||
1 2 3 4 5 6 | Schem | Schematics | September 23 2021 | confidential | ||||
1 2 3 4 5 6 |
|
TRpt 2.4GHz-WLAN | Test Report | 3.30 MiB | September 23 2021 | |||
1 2 3 4 5 6 |
|
TSup | Test Setup Photos | 2.05 MiB | September 23 2021 | |||
1 2 3 4 5 6 |
|
Trpt BLE | Test Report | 2.62 MiB | September 23 2021 | |||
1 2 3 4 5 6 | SW SecurityDecl | Operational Description | September 23 2021 | confidential | ||||
1 2 3 4 5 6 |
|
Trpt NII-1 | Test Report | 2.62 MiB | September 23 2021 | |||
1 2 3 4 5 6 |
|
Trpt NII-2 | Test Report | 5.16 MiB | September 23 2021 | |||
1 2 3 4 5 6 | PartLst | Parts List/Tune Up Info | September 23 2021 | confidential | ||||
1 2 3 4 5 6 |
|
BT TRpt | Test Report | 4.21 MiB | September 23 2021 |
1 2 3 4 5 6 | Label-in UserMan | ID Label/Location Info | 2.22 MiB | September 23 2021 |
PAN9028 Wi-Fi Dual Band 2.4 GHz/5 GHz and Bluetooth Module Module Integration Guide Rev. 1.0 Wireless Connectivity PAN9028 Wi-Fi/Bluetooth Module 1 About This Document Overview The PAN9028 is a 2.4GHz/5GHz ISM band Wi-Fi and Bluetooth radio module, which includes a wireless radio and a power management IC for easy integration of Wi-Fi and Bluetooth connectivity into various electronic devices. Features Dual band 2.4GHz/5GHz 802.11 a/b/g/n/ac Wi-Fi and Bluetooth combo module Supports 802.11i security standards through AES, CCMP, and more security mechanism 802.11e Quality of Service is supported for multimedia application IEEE 802.11ac (Wave 2), 11 spatial stream with data rates up to 433Mbps (MCS9, 80MHz channel bandwidth) IEEE 802.11ac MU-MIMO beamformee Bluetooth 5 (includes Low Energy) Dual simultaneous and independent WLAN and Bluetooth operation Dynamic Rapid Channel Switching (DRCS) for simultaneous operation in 2.4GHz and 5GHz bands Indoor location and navigation with IEEE 802.11mc Block Diagram Coexistence interface for arbitration of co-located WLAN, Bluetooth, or mobile wireless system
(e.g. LTE or ZigBee) Generic interfaces include SDIO 3.0 and high speed UART for host processor connection Software driver Linux Characteristics Surface Mount Type (SMT) 24mm 12mm 2.8mm NXP 88W8987 WLAN 2.4GHz/5GHz and Bluetooth single-chip solution inside Single power supply: 3.3V with Marvell 88PG823 Power Management IC (optional) Tx power: 16dBm at 802.11b Rx sensitivity: -97dBm at 802.11b DSSS 1Mbps IEEE 802.11ac 20MHz, 40MHz, 80MHz channel bandwidth Long and Short Guard Interval support Current consumption Wi-Fi typical 320mA (at Tx) and 70mA (at Rx) SDIO 1bit or 4bit Wide temperature range of -30C to 85C VDD +3.3 V GPIOs Sleep Clock PDN VIO/VIOSD COEX UART SDIO Interface PCM Interface PMIC 88PG823 Wi-Fi and Bluetooth PAN9028 Radio Module IEEE 802.11 a/b/g/n/ac Bluetooth 5 (BR, Low Energy, and EDR) 88W8987 Radio SoC Crystal 26 MHz BPF Chip Antenna SPDT DPX SPDT RF SW RF Pad Module Integration Guide Rev. 1.0 Page 2 of 45 PAN9028 Wi-Fi/Bluetooth Module 1 About This Document By purchase of any of the products described in this document the customer accepts the document's validity and declares their agreement and understanding of its contents and recommendations. Panasonic Industrial Devices Europe GmbH (Panasonic) reserves the right to make changes as required at any time without notification. Please consult the most recently issued Module Integration Guide before initiating or completing a design. Panasonic Industrial Devices Europe GmbH 2021. This specification sheet is copyrighted. Reproduction of this document is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Do not disclose it to a third party. All rights reserved. This Module Integration Guide does not lodge the claim to be complete and free of mistakes. Engineering Samples (ES) If Engineering Samples are delivered to the customer, these samples have the status Engineering Samples. This means that the design of this product is not yet concluded. Engineering Samples may be partially or fully functional, and they may differ from the published Product Specification. Engineering Samples are not qualified and they are not to be used for reliability testing or series production. Disclaimer The customer acknowledges that samples may deviate from the Module Integration Guide and may bear defects due to their status of development and the lack of qualification mentioned above. Panasonic rejects any liability or product warranty for Engineering Samples. In particular, Panasonic disclaims liability for damages caused by:
The use of the Engineering Sample other than for evaluation purposes, particularly the installation or integration in another product to be sold by the customer, Deviation or lapse in function of the Engineering Sample, Improper use of the Engineering Sample. Panasonic Industrial Devices Europe GmbH disclaims any liability for consequential and incidental damages. In case of any queries regarding the Engineering Samples, please contact your local sales partner or the related product manager. The information contained herein is presented only as guidance for Product use. No responsibility is assumed by Panasonic for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. Description of hardware, software, and other information in this document is only intended to illustrate the functionality of the referred Panasonic product. It should not be construed as guaranteeing specific functionality of the product as described or suitable for a particular application. Any provided (source) code shall not be used or incorporated into any products or systems whose manufacture, use or sale is prohibited under any applicable laws or regulations. Any outlined or referenced (source) code within this document is provided on an as is basis without any right to technical support or updates and without warranty of any kind on a free of charge basis according to 516 German Civil Law (BGB) including without limitation, any warranties or conditions of title, non infringement, merchantability, or fitness for a particular purpose. Customer acknowledges that (source) code may bear defects and errors. Module Integration Guide Rev. 1.0 Page 3 of 45 PAN9028 Wi-Fi/Bluetooth Module 1 About This Document The third-party tools mentioned in this document are offered by independent third-party providers who are solely responsible for these products. Panasonic has no responsibility whatsoever for the performance, product descriptions, specifications, referenced content, or any and all claims or representations of these third-party providers. Panasonic makes no warranty whatsoever, neither express nor implied, with respect to the goods, the referenced contents, or any and all claims or representations of the third-party providers. To the maximum extent allowable by Law Panasonic assumes no liability whatsoever including without limitation, indirect, consequential, special, or incidental damages or loss, including without limitation loss of profits, loss of opportunities, business interruption, and loss of data. Module Integration Guide Rev. 1.0 Page 4 of 45 PAN9028 Wi-Fi/Bluetooth Module 1 About This Document Table of Contents 1 About This Document ......................................................................................................................... 7 Purpose and Audience .................................................................................................. 7 1.1 Revision History ............................................................................................................. 7 1.2 Use of Symbols ............................................................................................................. 7 1.3 Related Documents ....................................................................................................... 8 1.4 2 Overview .............................................................................................................................................. 9 3 4 5 PAN9028 Module ............................................................................................................................... 10 Block Diagram ............................................................................................................. 10 3.1 Land Pattern ................................................................................................................ 11 3.2 Footprint ...................................................................................................................... 12 3.3 Solder Mask ................................................................................................................. 13 3.4 Placement .................................................................................................................... 13 3.5 Power Supply .................................................................................................................................... 15 RF Path .............................................................................................................................................. 16 External Antenna ......................................................................................................... 16 5.1 RF Trace ...................................................................................................................... 16 5.2 6 One-Layer Example for Module Variant ENWF940[x]A1EF ........................................................... 19 7 mSDIO Adapter ................................................................................................................................. 20 7.1 7.2 7.3 Functional Blocks ........................................................................................................ 20 Resistor Jumper Configuration .................................................................................... 20 Part Placement ............................................................................................................ 21 8 9 Reference Design.............................................................................................................................. 22 Schematic .................................................................................................................... 22 8.1 PCB Layout ................................................................................................................. 22 8.2 Cautions ............................................................................................................................................ 24 Design Notes ............................................................................................................... 24 9.1 Installation Notes ......................................................................................................... 24 9.2 Usage Condition Notes ................................................................................................ 25 9.3 Storage Notes .............................................................................................................. 25 9.4 9.5 Safety Cautions ........................................................................................................... 25 9.6 Other Cautions ............................................................................................................ 26 Restricted Use ............................................................................................................. 27 9.7 10 Regulatory and Certification Information ....................................................................................... 28 10.1 Federal Communications Commission (FCC) for US .................................................. 28 10.2 Innovation, Science, and Economic Development (ISED) for Canada ........................ 32 10.3 European Conformity According to RED (2014/53/EU) ............................................... 40 10.4 Bluetooth Qualification ................................................................................................. 44 10.5 RoHS And REACH Declaration ................................................................................... 44 11 Contact Details .................................................................................................................................. 45 11.1 Contact Us ................................................................................................................... 45 Module Integration Guide Rev. 1.0 Page 5 of 45 PAN9028 Wi-Fi/Bluetooth Module 1 About This Document 11.2 Product Information ..................................................................................................... 45 Module Integration Guide Rev. 1.0 Page 6 of 45 PAN9028 Wi-Fi/Bluetooth Module 1 About This Document 1 About This Document 1.1 Purpose and Audience This Module Integration Guide is intended to support the easy integration of the PAN9028 into a product and to ensure the compliance with regulatory requirements. This guide gives an overview about the hardware design requirements by providing a reference design, which is the evaluation board of the PAN9028. It is intended for hardware design and Original Equipment Manufacturers (OEM) engineers. The product is referred to as the PAN9028 or the module within this document. 1.2 Revision History Revision Date Modifications/Remarks 0.1 0.2 2018-05-08 First preliminary version 2021-03-15 Changed SDIO stick to mSD stick. New design. Updated formatting. Changed document type and structure (Design Guide into Module Integration Guide). Corrected current consumption. Corrected cutout area. Updated chapter Power Supply. Removed chapter Power Configuration Examples for ENWF940[x]A1EF. Updated chapter Placement. Updated picture Solder Mask Layout. Updated chapter Functional Blocks. 1.0 2021-08-26 Updated pictures: Block Diagram and Land Pattern. Updated features. Added regulatory chapter. Changed mSD Reference Design to mSD-U 1.3 Use of Symbols Symbol Description Note Indicates important information for the proper use of the product. Non-observance can lead to errors. Attention Indicates important notes that, if not observed, can put the products functionality at risk. Tip Indicates useful information designed to facilitate working with the module and software. Module Integration Guide Rev. 1.0 Page 7 of 45 PAN9028 Wi-Fi/Bluetooth Module 1 About This Document Symbol Description
[chapter number]
[chapter title]
Cross Reference Indicates cross references within the document. Example:
Description of the symbols used in this document 1.3 Use of Symbols. Requirement Indicates a requirement that must be met before the corresponding tasks can be completed. Result Indicates the result of a task or the result of a series of tasks. This font GUI Text Indicates fixed terms and text of the graphical user interface. Example:
Click Save. Menu > Menu item Path Indicates a path, e.g. to access a dialog. Example:
In the menu, select File > Setup page. This font File Names, Messages, User Input Indicates file names or messages and information displayed on the screen or to be selected or entered by the user. Examples:
pan1760.c contains the actual module initialization. The message Failed to save your data is displayed. Enter the value Product 123. Key Key Indicates a key on the keyboard, e.g. F10 . 1.4 Related Documents For related documents please refer to the Panasonic website 11.2 Product Information. Module Integration Guide Rev. 1.0 Page 8 of 45 PAN9028 Wi-Fi/Bluetooth Module 2 Overview 2 Overview The PAN9028 is a dual band 2.4 GHz and 5 GHz 802.11 a/b/g/n/ac Wi-Fi radio module with integrated Bluetooth BR/EDR/Low Energy (LE), specifically designed for highly integrated and cost-effective applications. The simultaneous and independent operation of the two standards enables very high data rates (802.11ac) and low-power operation (Bluetooth LE). Integrated power management, a fast dual-core CPU, 802.11i security standard support, and high-speed data interfaces deliver the performance for the speed, reliability, and quality requirements of next generation products. Tx power calibration data, Wi-Fi, and Bluetooth system parameters are pre-stored on the One Time Programmable memory of the PAN9028 during production at Panasonic. This simplifies passing the certification process for PAN9028 customers. Furthermore, the module reduces design, test, and calibration effort resulting in reduced time-
to-market compared to discrete solutions. Integrating Wi-Fi and Bluetooth wireless connectivity allows high throughput applications for industrial devices and appliances. The combination of Wi-Fi and Bluetooth provides the highest flexibility for connectivity. This Module Integration Guide applies to the PAN9028 WLAN/Bluetooth combo module and the PAN9028 mSDIO Adapter development platform. This document is structured into two main parts:
The hardware integration of the PAN9028 module. The PAN9028 mSDIO Adapter as an example for the module integration. For related documents please refer to 11.2 Product Information. Module Integration Guide Rev. 1.0 Page 9 of 45 PAN9028 Wi-Fi/Bluetooth Module 3 PAN9028 Module 3 PAN9028 Module 3.1 Block Diagram For Module Variant ENWF940[x]A1EF:
VDD +3.3 V GPIOs Sleep Clock PDN VIO/VIOSD COEX UART SDIO Interface PCM Interface PMIC 88PG823 Wi-Fi and Bluetooth PAN9028 Radio Module IEEE 802.11 a/b/g/n/ac Bluetooth 5 (BR, Low Energy, and EDR) 88W8987 Radio SoC Crystal 26 MHz BPF Chip Antenna SPDT DPX SPDT RF SW RF Pad For Module Variant ENWF940[x]A2EF:
VDD +3.3 V VDD +2.2 V VDD +1.8 V VDD +1.1 V GPIOs Sleep Clock PDN VIO/VIOSD COEX UART SDIO Interface PCM Interface Wi-Fi and Bluetooth PAN9028 Radio Module IEEE 802.11 a/b/g/n/ac Bluetooth 5 (BR, Low Energy, and EDR) Chip Antenna 88W8987 Radio SoC Crystal 26 MHz BPF SPDT DPX SPDT RF SW RF Pad Module Integration Guide Rev. 1.0 Page 10 of 45 PAN9028 Wi-Fi/Bluetooth Module 3 PAN9028 Module 3.2 Land Pattern For Module Variant ENWF940[x]A1EF:
Top View G F E D C B A 1 2 VOUT 2.2V VOUT 2.2V 3 VIO 4 5 6 7 8 9 10 11 12 VOUT 1.8V SD_CLK SD_CMD SD_DAT0 SD_DAT1 SD_DAT2 SD_DAT3 GND RF GND VDD 3.3V VDD 3.3V VIO_SD GPIO GPIO GPIO GPIO GPIO GPIO GND GND GPIO PG2 EP 1 EP 2 PGLDO SLEEP CLOCK IN CONFIG HOST[0]
CONFIG AUTO REF DET GND GND EP 1 EP 2 GND GND GND GND PG1 GPIO DNC GPIO PDN UART UART UART GPIO GPIO RF_SW1 GND GND EN PMIC 1 2 VOUT 1.1 V 3 GPIO DNC UART UART UART DNC GPIO RF_SW2 GND 4 5 6 7 8 9 10 11 12 For Module Variant ENWF940[x]A2EF:
Top View G F E D C B A 1 VDD 2.2V GND GPIO DNC DNC 2 VDD 2.2V VDD 3.3V 3 VIO VDD 3.3V 4 VDD 1.8V 5 6 7 8 9 10 11 12 SD_CLK SD_CMD SD_DAT0 SD_DAT1 SD_DAT2 SD_DAT3 GND RF VIO_SD GPIO GPIO GPIO GPIO GPIO GPIO GND GND EP 1 EP 2 SLEEP CLOCK IN CONFIG HOST[0]
CONFIG AUTO REF DET GND GND EP 1 EP 2 GND GND GND GND DNC GPIO DNC GPIO PDN UART UART UART GPIO GPIO RF_SW1 GND GND DNC 1 2 VDD 1.1 V 3 GPIO DNC UART UART UART DNC GPIO RF_SW2 GND 4 5 6 7 8 9 10 11 12 G F E D C B A G F E D C B A Module Integration Guide Rev. 1.0 Page 11 of 45 PAN9028 Wi-Fi/Bluetooth Module 3 PAN9028 Module 3.3 Footprint The outer dimensions have a tolerance of 0.35 mm. Module Integration Guide Rev. 1.0 Page 12 of 45 PAN9028 Wi-Fi/Bluetooth Module 3 PAN9028 Module 3.4 Solder Mask It is recommended to use the following layout for the soldering mask to reduce voids on the thermal pads. Use the dimensions:
The Resist Mask should be 50m bigger than the pad size ( 3.3 Footprint). The Solder Mask should be 50m smaller than the pad size ( 3.3 Footprint); they are separated in two semi circles with 300m distance and a shifting about 150m. Layout 3.5 Placement Antenna Keep out Area Do not place any ground plane under the marked restricted antenna area in any layer! This would be affecting the performance of the chip antenna in a critical manner. Impact of Placement on the Antenna Radiation Pattern The placement of the module, surrounding material, and customer components has an impact on the radiation pattern of the antenna. The recommendation for the ground plane is based on a FR4 4-Layer PCB. The following requirements must be met:
Keep this product away from heat. Heat is the major cause of decreasing the life of these products. Keep this product away from other high frequency circuits. Module Integration Guide Rev. 1.0 Page 13 of 45 PAN9028 Wi-Fi/Bluetooth Module 3 PAN9028 Module The antenna requires a cutout area of 8mm x 5mm under the PAN9028 module. This Keep out Area shall be located in every layer under the module antenna. Note for example the Keep out Area in all four layers of the PAN9028 evaluation board. It is recommended to verify the perfect position of the module in the target application before fixing the design. Antenna Placement Recommendation Use a ground plane in the area surrounding the module wherever possible. All dimensions are in millimeters. It is recommended to place the module:
In the center (horizontal) of mother PCB. At the edge (horizontal) of mother PCB. Top View Min. 15.00 12.00 Min. 15.00 3.00 8.00 1.00 Keep out Area PAN9028 Module Integration Guide Rev. 1.0 Page 14 of 45 PAN9028 Wi-Fi/Bluetooth Module 4 Power Supply 4 Power Supply The following conditions must be met:
The supply voltage must be free of AC ripple voltage (for example from a battery or a low noise regulator output). For noisy supply voltages, provide a decoupling circuit (for example a ferrite in series connection and a bypass capacitor to ground of at least 47F directly at the module). The supply voltage should not be exceedingly high or reversed. It should not carry noise and/or spikes. ENWF940[x]A1EF: The VOUT1V1, VOUT1V8 and VOUT2V2 power supply pins are only for internal purpose. Do not use them to power external curcuits. Take care to follow correct power-up sequence of module which is specified in PAN9028 product specification. Module Integration Guide Rev. 1.0 Page 15 of 45 PAN9028 Wi-Fi/Bluetooth Module 5 RF Path 5 RF Path 5.1 External Antenna Antenna Warning The PAN9028 is tested with a standard U.FL connector and with the antenna listed in the regulatory and certification chapter of the PAN9028 Product Specification. When integrated into the OEMs product, these fixed antennas require installation preventing end users from replacing them with non-
approved antennas. Any antenna not in the regulatory and certification chapter of the PAN9028 Product Specification must be tested to comply with FCC Section 15.203 for unique antenna connectors and with Section 15.247 for emissions. The PAN9028 module has a 50ohm RF pin (SMD pad). Connect an external antenna directly or via a connector (e.g. U.FL) with RF trace to this RF pin. This RF trace shall be matched to 50ohm 5.2 RF Trace. 5.2 RF Trace Ensure that the RF trace impedance is nearly 50ohm. It is recommended to use a Coplanar Waveguide with Ground (CPWG) design. The impedance is related to the trace width, the distances of the trace to the ground layers and the material of the PCB. The following design recommendation shall be met:
Trace impedance of 50ohm Trace length shall not exceed 2cm Via fence around the trace Crossing no other lines (power supply, interfaces or clock traces) Module Integration Guide Rev. 1.0 Page 16 of 45 PAN9028 Wi-Fi/Bluetooth Module 5 RF Path Example 1: 50ohm Coplanar Waveguide with Ground on mSDIO Adapter Trace width W = 180m Trace distance to ground S = 150m Substrate thickness H = 80m Effective permittivity
= 3.9 Loss tangent tan = 0.015 S W S H Module Integration Guide Rev. 1.0 Page 17 of 45 PAN9028 Wi-Fi/Bluetooth Module 5 RF Path Example 2: 50ohm Coplanar Waveguide with Ground and Micro Vias Trace width W = 300m Trace distance to ground S = 300m Substrate thickness H = 160m Effective permittivity
= 4.2 Loss tangent tan = 0.006 Module Integration Guide Rev. 1.0 Page 18 of 45 PAN9028 Wi-Fi/Bluetooth Module 6 One-Layer Example for 6 One-Layer Example for Module Variant ENWF940[x]A1EF Functionality WLAN interface: SDIO with 3.3V Bluetooth interface: SDIO with 3.3V On-board antenna No GPIOs connected Reset available Module Integration Guide Rev. 1.0 Page 19 of 45 PAN9028 Wi-Fi/Bluetooth Module 7 mSDIO Adapter 7 mSDIO Adapter 7.1 Functional Blocks Functional Block Description A B C D E F G On-board antenna or bottom pad selection U.FL connector PAN9028 module SDIO interface Bluetooth data over UART or SDIO Bluetooth Interface External supply voltage can be connected Interface X1 7.2 Resistor Jumper Configuration R6 0R n.c. R7 n.c. 0R RF-Out PAN9028 chip antenna RF-UFL X1 connector Module Integration Guide Rev. 1.0 Page 20 of 45 PAN9028 Wi-Fi/Bluetooth Module 7 mSDIO Adapter 7.3 Part Placement Module Integration Guide Rev. 1.0 Page 21 of 45 PAN9028 Wi-Fi/Bluetooth Module 8 Reference Design 8 Reference Design 8.1 Schematic 8.2 PCB Layout 8.2.1 Top Layer Module Integration Guide Rev. 1.0 Page 22 of 45 PAN9028 Wi-Fi/Bluetooth Module 8 Reference Design 8.2.2 Second Layer 8.2.3 Third Layer (3.3V Power Plane) 8.2.4 Bottom Layer Module Integration Guide Rev. 1.0 Page 23 of 45 PAN9028 Wi-Fi/Bluetooth Module 9 Cautions 9 Cautions Failure to follow the guidelines set forth in this document may result in degrading of the module functions and damage to the module. 9.1 Design Notes 1. Follow the conditions written in this specification, especially the control signals of this module. 2. The supply voltage should abide by the maximum ratings ( Refer to PAN9028 Product Specification for maximum ratings). 3. The supply voltage must be free of AC ripple voltage (for example from a battery or a low noise regulator output). For noisy supply voltages, provide a decoupling circuit (for example a ferrite in series connection and a bypass capacitor to ground of at least 47F directly at the module). 4. This module should not be mechanically stressed when installed. 5. Keep this module away from heat. Heat is the major cause of decreasing the life time of these modules. 6. Avoid assembly and use of the target equipment in conditions where the module temperature may exceed the maximum tolerance. 7. Keep this module away from other high frequency circuits. 8. Refer to the recommended pattern when designing a board. 9.2 Installation Notes 1. Reflow soldering is possible twice based on the conditions set forth in PAN9028 Product Specification. Set up the temperature at the soldering portion of this module according to this reflow profile. 2. Carefully position the module so that the heat will not burn into printed circuit boards or affect other components that are susceptible to heat. 3. Carefully locate the module, to avoid an increased temperature caused by heat generated by neighboring components. 4. If a vinyl-covered wire comes into contact with the module, the wire cover will melt and generate toxic gas, damaging the insulation. Never allow contact between a vinyl cover and these modules to occur. 5. This module should not be mechanically stressed or vibrated when reflowed. 6. To repair the board by hand soldering, follow the conditions set forth in this chapter. 7. Do not wash this product. 8. Pressing on parts of the metal cover or fastening objects to the metal will cause damage to the module. Module Integration Guide Rev. 1.0 Page 24 of 45 PAN9028 Wi-Fi/Bluetooth Module 9 Cautions 9.3 Usage Condition Notes 1. Take measures to protect the module against static electricity. If pulses or transient loads (a large load, which is suddenly applied) are applied to the modules, check and evaluate their operation before assembly of the final products. 2. Do not use dropped modules. 3. Do not touch, damage, or soil the pins. 4. Follow the recommended condition ratings about the power supply applied to this module. 5. Electrode peeling strength: Do not apply a force of more than 4.9N in any direction on the soldered module. 6. Pressing on parts of the metal cover or fastening objects to the metal cover will cause damage. 7. These modules are intended for general purpose and standard use in general electronic equipment, such as home appliances, office equipment, information, and communication equipment. 9.4 Storage Notes 1. The module should not be stressed mechanically during storage. 2. Do not store these modules in the following conditions or the performance characteristics of the module, such as RF performance will be adversely affected:
Storage in salty air or in an environment with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NOX, Storage in direct sunlight, Storage in an environment where the temperature may be outside the range of 5C to 35C, or where the humidity may be outside the 45% to 85% range, Storage of the modules for more than one year after the date of delivery storage period: Please check the adhesive strength of the embossed tape and soldering after 6 months of storage. 3. Keep this module away from water, poisonous gas, and corrosive gas. 4. This module should not be stressed or shocked when transported. 5. Follow the specification when stacking packed crates (max. 10). 9.5 Safety Cautions These specifications are intended to preserve the quality assurance of products and individual components. Before use, check and evaluate the operation when mounted on your products. Abide by these specifications without deviation when using the products. These products may short-circuit. If electrical shocks, smoke, fire, and/or accidents involving human life are anticipated when a short circuit occurs, provide the following failsafe functions as a minimum:
Module Integration Guide Rev. 1.0 Page 25 of 45 PAN9028 Wi-Fi/Bluetooth Module 9 Cautions 1. Ensure the safety of the whole system by installing a protection circuit and a protection device. 2. Ensure the safety of the whole system by installing a redundant circuit or another system to prevent a single fault causing an unsafe status. 9.6 Other Cautions 1. Do not use the module for other purposes than those listed in section 9.3 Usage Condition Notes. 2. Be sure to provide an appropriate fail-safe function on your product to prevent any additional damage that may be caused by the abnormal function or the failure of the module. 3. This module has been manufactured without any ozone chemical controlled under the Montreal Protocol. 4. These modules are not intended for use under the special conditions shown below. Before using these modules under such special conditions, carefully check their performance and reliability under the said special conditions to determine whether or not they can be used in such a manner:
In liquid, such as water, salt water, oil, alkali, or organic solvent, or in places where liquid may splash, In direct sunlight, outdoors, or in a dusty environment, In an environment where condensation occurs, In an environment with a high concentration of harmful gas (e. g. salty air, HCl, Cl2, SO2, H2S, NH3, and NOX). 5. If an abnormal voltage is applied due to a problem occurring in other components or circuits, replace these modules with new modules, because they may not be able to provide normal performance even if their electronic characteristics and appearances appear satisfactory. For further information please refer to the Panasonic website 11.2 Product Information. Module Integration Guide Rev. 1.0 Page 26 of 45 PAN9028 Wi-Fi/Bluetooth Module 9 Cautions 9.7 Restricted Use 9.7.1 Life Support Policy This Panasonic Industrial Devices Europe GmbH product is not designed for use in life support appliances, devices, or systems where malfunction can reasonably be expected to result in a significant personal injury to the user, or as a critical component in any life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Panasonic customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panasonic Industrial Devices Europe GmbH for any damages resulting. 9.7.2 Restricted End Use This Panasonic Industrial Devices Europe GmbH product is not designed for any restricted activity that supports the development, production, handling usage, maintenance, storage, inventory or proliferation of any weapons or military use. Transfer, export, re-export, usage or reselling of this product to any destination, end user or any end use prohibited by the European Union, United States or any other applicable law is strictly prohibited. Module Integration Guide Rev. 1.0 Page 27 of 45 PAN9028 Wi-Fi/Bluetooth Module 10 Regulatory and Certi 10 Regulatory and Certification Information 10.1 Federal Communications Commission (FCC) for US 10.1.1 FCC Notice The PAN9028, including the ceramic antenna (ENWF9408A1EF and ENWF9408A2EF), and the antennas, which are listed in 10.1.5 Approved Antenna List, complies with Part 15 of the FCC Rules. The device meets the requirements for modular transmitter approval as detailed in FCC public Notice DA00-1407. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. The FCC identifier for ENWF9408A1EF is FCC ID: T7V9028. The FCC identifier for ENWF9408A2EF is FCC ID: T7V9028. 10.1.2 Caution The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Panasonic Industrial Devices Europe GmbH may void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. Module Integration Guide Rev. 1.0 Page 28 of 45 PAN9028 Wi-Fi/Bluetooth Module 10 Regulatory and Certi It is recommended to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to Increase the separation between the equipment and receiver. which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 10.1.3 Label Requirements The OEM must ensure that FCC labelling requirements are met. This includes a clearly visible label (laser marking) on the outside of the OEM enclosure specifying the appropriate Panasonic FCC identifier for this product as well as the FCC Notice above. The FCC identifier for model ENWF9408A1EF is FCC ID: T7V9028. The FCC identifier for model ENWF9408A2EF is FCC ID: T7V9028. This FCC identifier is valid for the PAN9028. The end product must in any case be labelled on the exterior with:
Contains FCC ID: T7V9028. Due to the PAN9028 model size, the FCC identifier is displayed in the installation instruction only and it cannot be displayed readable on the modules label due to the limited size. 10.1.4 Antenna Warning This antenna warning refers to the test device with the model number ENWF9408A1EF and ENWF9408A2EF in bottom pad mode ( Refer to PAN9028 Product Specification for RF-
Switch Pin Function). The device is tested with a standard SMA connector and with the antenna listed below. When integrated into the OEMs product, these fixed antennas require installation preventing end users from replacing them with non-approved antennas. Any antenna not in the following table must be tested to comply with FCC Section 15.203 for unique antenna connectors and with Section 15.247 for emissions. The FCC identifier for the device with the antenna listed in
10.1.5 Approved Antenna List is the same (FCC ID: T7V9028). Module Integration Guide Rev. 1.0 Page 29 of 45 PAN9028 Wi-Fi/Bluetooth Module 10 Regulatory and Certi 10.1.5 Approved Antenna List Item Part Number Manufacturer Type Polarization Frequency Band Gain (dBi) 1 ANT162442DT-
TDK 2001A2 Chip Antenna Linear 2.400 - 2.484GHz 5.150 - 5.850GHz 2.1 1.5 10.1.6 RF Exposure To comply with FCC RF Exposure requirements, the OEM must ensure that only antennas from the Approved Antenna List are installed 10.1.5 Approved Antenna List. The preceding statement must be included as a caution statement in manuals for products operating with the approved antennas in the previous table to alert users on FCC RF Exposure compliance. Any notification to the end user of installation or removal instructions about the integrated radio module is not allowed. The radiated output power of the PAN9028 with a mounted ceramic chip antenna
(FCC ID: T7V9028 for model ENWF9408A1EF and ENWF9408A2EF) are fulfilled for mobile configuration. The installation of the module is restricted to mobile host devices. The PAN9028 shall be used in such a manner that the potential for human contact during normal operation is minimized. End users may not be provided with the module installation instructions. OEM integrators and end users must be provided with transmitter operating conditions for satisfying RF exposure compliance. 10.1.7 Integration Instructions This chapter gives integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01. Section Topic and Comment 2.2 List of applicable FCC rules 47 CFR Section Part 15C Frequency Band (MHz) 2 400 to 2 483.5 Systems Digital Transmission Systems operating within the 2 400 - 2 483.5 MHz Band Reference / Requirement 15.247(a)(2), 15.247(b)(1), 15.207, 15.247(d), 15.247(e) Complied Module M/N ENWF9408A1EF, ENWF9408A2EF Module Integration Guide Rev. 1.0 Page 30 of 45 PAN9028 Wi-Fi/Bluetooth Module 10 Regulatory and Certi 47 CFR Section Part 15C Frequency Band (MHz) 2 400 to 2 483.5 Systems Frequency Hopping Systems operating within the 2 400 - 2 483.5 MHz Band Reference / Requirement 15.247(a)(1), 15.247(a)(1)(iii), 15.247(b)(1), 15.207, 15.247(d) Complied Module M/N ENWF9408A1EF, ENWF9408A2EF 47 CFR Section Part 15E Systems Unlicensed National Information Infrastructure Devices in the 5 GHz Bands Reference Method KDB 905462 D02 v02 Reference / Requirement 15E.407(h)(2) Complied Module M/N ENWF9408A1EF, ENWF9408A2EF 2.3 Summarize the specific operational use conditions Please refer to sections 9 Cautions, 9.3 Usage Condition Notes, and 10.1.5 Approved Antenna List. 2.4 Limited module procedures Not applicable, the module has a single-modular transmitter approval. 2.5 Trace antenna designs Not applicable, the module has a ceramic chip antenna. For guidance regarding the PCB layout requirements for module integration refer to the Design Guide 11.2 Product Information. 2.6 RF exposure considerations Mobile application, the end customer has to assure that the device has a distance of more than 20cm from the human body under all circumstances. 2.7 Antennas Please refer to sections 10.1.4 Antenna Warning and 10.1.5 Approved Antenna List. 2.8 Label and compliance information Please refer to section 10.1.3 Label Requirements. 2.9 Information on test modes and additional testing requirements The documents for integration guidance and compliance testing are available here 11.2 Product Information. 2.10 Additional testing, Part 15 Subpart B disclaimer The single-modular transmitter is FCC authorized for the specific rule parts listed at section List of applicable FCC rules. The host product manufacturer needs to also consider the FCC requirements for certified modular transmitter being used in the host product and maintain documentation on how the host product with the certified modular transmitter complies with the FCC rules. Host product manufacturers are responsible to follow the integration guidance and to perform a limited set of transmitter module verification testing, to ensure the end product is in compliance with the FCC rules. Also host product manufacturers are responsible for all additional equipment authorization and testing for technical requirements not covered by the module grant (e.g., unintentional radiator Part 15 Subpart B requirements, or transmitters used in the host that are not certified modules). Module Integration Guide Rev. 1.0 Page 31 of 45 PAN9028 Wi-Fi/Bluetooth Module 10 Regulatory and Certi 10.2 Innovation, Science, and Economic Development (ISED) for Canada English PAN9028 and versions are licensed to meet the regulatory requirements of ISED. License for M/N: ENWF9408A1EF:
IC: 216Q-9028 License for M/N: ENWF9408A2EF:
IC: 216Q-9028 Manufacturers of mobile, fixed, or portable devices incorporating this module are advised to clarify any regulatory questions and ensure compliance for SAR and/or RF exposure limits. Users can obtain Canadian information on RF exposure and compliance from www.ic.gc.ca. This device has been designed to operate with the antennas listed in 10.1.5 Approved Antenna List, having a maximum gain of 2.1dBi for 2.4 GHz and 1.5 dBi for 5 GHz. Antennas not included in this list or having a gain greater than 2.1dBi for 2.4 GHz and 1.5 dBi for 5 GHz are strictly prohibited for use with this device. The required antenna impedance is 50. The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. French PAN9028 (et ses versions) est garanti conforme aux dispositions rglementaires dInnovation, Sciences et Dveloppement conomique (ISDE). Licence pour M/N: ENWF9408A1EF:
IC: 216Q-9028 Licence pour M/N: ENWF9408A2EF:
IC: 216Q-9028 Il est recommand aux fabricants dappareils fixes, mobiles ou portables de consulter la rglementation en vigueur et de vrifier la conformit de leurs produits relativement aux limites dexposition aux rayonnements radiofrquence ainsi quau dbit dabsorption spcifique maximum autoris. Des informations pour les utilisateurs sur la rglementation Canadienne concernant lexposition aux rayonnements RF sont disponibles sur le site www.ic.gc.ca. Ce produit a t dvelopp pour fonctionner spcifiquement avec les antennes listes dans le tableau 10.1.5 Approved Antenna List, prsentant un gain maximum de 2.1dBi pour 2.4 GHz et 1.5 dBi pour 5 GHz. Des antennes autres que celles listes ici, ou prsentant un gain suprieur 2.1dBi pour 2.4 GHz et 1.5 dBi pour 5 GHz ne doivent en aucune circonstance tre utilises en combinaison avec ce produit. Limpdance des antennes compatibles est 50. Lantenne utilise avec ce produit ne doit ni tre situe proximit dune autre antenne ou dun autre metteur, ni tre utilise conjointement avec une autre antenne ou un autre metteur. 10.2.1 Radio Standards Specification RSS-247 Issue 2 The Radio Standards Specification RSS-247, Issue 2, Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and License-Exempt Local Area Network (LE-LAN) Devices, replaces RSS-247, Issue 1, dated May 2015. It sets out certification requirements for Module Integration Guide Rev. 1.0 Page 32 of 45 PAN9028 Wi-Fi/Bluetooth Module 10 Regulatory and Certi radio apparatus operating in the bands 2 400MHz to 2 483.5MHz and 5 725MHz to 5 850MHz employing frequency hopping, digital modulation and/or a combination (hybrid) of both techniques. It also includes license exempt local area network (LE-LAN) devices operating in the bands 5 150MHz to 5 250MHz, 5 250MHz to 5 350MHz, 5 470MHz to 5 725MHz and 5 725MHz to 5 850MHz as specified in SP-5 150 MHz. 10.2.1.1 General Equipment covered by the standard RSS-247 is classified as Category I equipment. Either a technical acceptance certificate (TAC) issued by the Certification and Engineering Bureau of Innovation, Science and Economic Development Canada (ISED) or a certificate issued by a certification body (CB) is required. 10.2.1.2 Certification Requirements RSS-247 shall be used in conjunction with RSS-Gen, General Requirements for Compliance of Radio Apparatus, for general specifications and information relevant to the equipment for which this standard applies. Equipment certified under the standard is required to comply with the provisions in RSSGen with respect to emissions falling within restricted frequency bands. These restricted frequency bands are listed in RSSGen. 10.2.1.3 Measurement Method In addition to the requirements in RSS-Gen and the requirements of the standard RSS-247, the method for measuring DTS devices is provided in ANSI C63.10. 10.2.1.4 FHS and DTS operating in the bands 2 400MHz to 2 483.5MHz This section applies to frequency hopping systems (FHSs) in the bands 2 400MHz to 2 483.5MHz and 5 725MHz to 5 850MHz and digital transmission systems (DTSs) in the band 2 400MHz to 2 483.5MHz. Systems in these bands can be frequency hopping, digital transmission and/or a combination (hybrid) of both types. The digital transmission technology of DTSs or hybrid systems operating in the band 5 725 MHz to 5 850MHz shall comply with the requirement in section Technical requirements for license-exempt local area network devices and digital transmission systems operating in the 5GHz band. Module Integration Guide Rev. 1.0 Page 33 of 45 PAN9028 Wi-Fi/Bluetooth Module 10 Regulatory and Certi RSS-247 Section 5.1 Frequency Band (MHz) 2 400 to 2 483.5 Systems Frequency Hopping Systems Systems out of Scope FHS operating in the band 5 725MHz to 5 850MHz Fixed point-to-point systems Requirements The maximum peak conducted output power shall not exceed W if the hopset uses 75 or more hopping channels; the maximum peak conducted output power shall not exceed 0.125 W if the hopset uses less than 75 hopping channels. Complied Module M/N ENWF9408A1EF, ENWF9408A2EF RSS-247 Section 5.2 Frequency Band (MHz) 2 400 to 2 483.5 Systems Digital Transmission Systems Systems out of Scope
Requirements The minimum 6dB bandwidth shall be 500kHz. The transmitter power spectral density conducted from the transmitter to the antenna shall not be greater than 8dBm in any 3kHz band during any time interval of continuous transmission. The maximum peak conducted output power shall not exceed 1W. The e.i.r.p. shall not exceed 4W. Complied Module M/N ENWF9408A1EF, ENWF9408A2EF RSS-247 Section 5.3 Frequency Band (MHz) 2 400 to 2 483.5 Systems Hybrid Systems Systems out of Scope Hybrid devices operating in the band 5 725MHz to 5 850MHz. Requirements With the digital transmission operation of the hybrid system turned off, the frequency hopping operation shall have an average time of occupancy on any frequency not exceeding 0.4 seconds within a duration in seconds equal to the number of hopping frequencies multiplied by 0.4. With the frequency hopping turned off, the digital transmission operation shall comply with the power spectral density requirements for digital modulation systems set out in section 5.2 RSS-247 Section. Complied Module M/N ENWF9408A1EF, ENWF9408A2EF Module Integration Guide Rev. 1.0 Page 34 of 45 PAN9028 Wi-Fi/Bluetooth Module 10 Regulatory and Certi RSS-247 Section 5.4 Frequency Band (MHz) 2 400 to 2 483.5 Systems FHSs operating in the band 2 400 to 2 483.5MHz. DTSs employing digital modulation techniques operating in the band 2 400MHz to 2 483.5MHz. Systems out of Scope FHSs operating in the band 902MHz to 928MHz and 5 725MHz to 5 850MHz. DTSs employing digital modulation techniques operating in the bands 902MHz to 928MHz. Fixed point-to-point systems in the bands 2 400MHz to 2 483.5MHz and 5 725MHz to 5 850MHz. Transmitters operating in the band 2 400MHz to 2 483.5MHz, may employ antenna systems that emit multiple directional beams simultaneously or sequentially. Requirements Transmitter Output Power:
The maximum peak conducted output power shall not exceed 1W if the hopset uses 75 or more hopping channels; the maximum peak conducted output power shall not exceed 0.125W if the hopset uses less than 75 hopping channels. The e.i.r.p. shall not exceed 4W. For DTSs employing digital modulation techniques operating in the band 2 400MHz to 2 483.5MHz, the maximum peak conducted output power shall not exceed W. The e.i.r.p. shall not exceed 4W. Complied Module M/N ENWF9408A1EF, ENWF9408A2EF RSS-247 Section 5.5 Frequency Band (MHz) 2 400 to 2 483.5 System In any 100kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated device is operating System out of Scope
Requirements Unwanted Emissions:
In any 100kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated device is operating, the RF power that is produced shall be at least 20dB below that in the 100kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided that the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of root-
mean-square averaging over a time interval the attenuation required shall be 30dB instead of 20dB. Attenuation below the general field strength limits specified in RSS-Gen is not required. Complied Module M/N ENWF9408A1EF, ENWF9408A2EF Module Integration Guide Rev. 1.0 Page 35 of 45 PAN9028 Wi-Fi/Bluetooth Module 10 Regulatory and Certi 10.2.1.5 Requirements for LE-LAN and DTS operating in the 5 GHz Band The section provides standards for Licence-Exempt Local Area Network (LE-LAN) devices operating in the bands:
5 150 to 5 250 MHz, 5 725 to 5 850 MHz For DTSs operating in the band 5 725MHz to 5 850MHz that employ digital modulation technology, but are not designed for LE-LAN operation. Devices with occupied bandwidths which overlap different bands shall comply with all operational requirements for each band. RSS-247 Section 6.2.1 Frequency Band (MHz) 5 150 to 5 250 Device Type LE-LAN devices are restricted to indoor operation only. Devices out of Scope OEM devices installed in vehicles. Power Limits Unwanted Emission Limits Maximum e.i.r.p. shall not exceed 200 mW or 10+10log10B, dBm, whichever power is less. B is the 99% emission bandwidth in megahertz. The e.i.r.p. spectral density shall not exceed 10 dBm in any 1 MHz band. For transmitters with operating frequencies in the band 5 150MHz to 5 250MHz, all emissions outside the band 5 150MHz to 5 350 MHz shall not exceed -27dBm/MHz e.i.r.p. Any unwanted emissions that fall into the band 5 250MHz to 5 350 MHz shall be attenuated below the channel power by at least 26dB, when measured using a resolution bandwidth between 1% and 5% of the occupied bandwidth (i.e. 99% bandwidth), above 5 250MHz. The 26dB bandwidth may fall into the 5 250MHz to 5 350 MHz band; if the occupied bandwidth also falls within the 5 250MHz to 5 350 MHz band, the transmission is considered as intentional and the devices shall comply with all requirements in the band 5 250MHz to 5 350 MHz including implementing dynamic frequency selection (DFS) and TPC, on the portion of the emission that resides in the 5 250MHz to 5 350MHz band. Complied Module M/N ENWF9408A1EF, ENWF9408A2EF Module Integration Guide Rev. 1.0 Page 36 of 45 PAN9028 Wi-Fi/Bluetooth Module 10 Regulatory and Certi RSS-247 Section 6.2.4 Frequency Band (MHz) 5 725 to 5 850 Device Type For equipment operating in the band 5 725MHz to 5 850MHz Devices out of Scope Fixed point-to-point devices and devices with antenna gain greater than 6dBi. Power Limits The minimum 6dB bandwidth shall be at least 500kHz. The maximum conducted output power shall not exceed 1 W. The output power spectral density shall not exceed 30dBm in any 500kHz band. Unwanted Emission Limits Devices shall have e.i.r.p. of unwanted emissions comply with the following:
27dBm/MHz at frequencies from the band edges decreasing linearly to 15.6dBm/MHz at 5MHz above or below the band edges 15.6dBm/MHz at 5MHz above or below the band edges decreasing linearly to 10dBm/MHz at 25MHz above or below the band edges 10dBm/MHz at 25MHz above or below the band edges decreasing linearly to -27dBm/MHz at 75MHz above or below the band edges
-27dBm/MHz at frequencies more than 75MHz above or below the band edges Complied Module M/N ENWF9408A1EF, ENWF9408A2EF Module Integration Guide Rev. 1.0 Page 37 of 45 PAN9028 Wi-Fi/Bluetooth Module 10 Regulatory and Certi 10.2.2 IC Notice English The device PAN9028 and versions ( see PAN9028 Product Specification for ordering information), including the antennas ( 10.1.5 Approved Antenna List), comply with Canada RSS-Gen Rules. The device meets the requirements for modular transmitter approval as detailed in RSS-Gen. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any inference received, including interference that may cause undesired operation. French Le prsent appareil PAN9028 ( voir PAN9028 Product Specification pour informations de commande), les antennes y compris ( 10.1.5 Approved Antenna List), est conforme aux CNR-Gen d'ISDE applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
1. L'appareil ne doit pas produire de brouillage, et 2. L'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Module Integration Guide Rev. 1.0 Page 38 of 45 PAN9028 Wi-Fi/Bluetooth Module 10 Regulatory and Certi 10.2.3 Labeling Requirements English Labeling Requirements The OEM must ensure that IC labelling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate Panasonic IC identifier for this product as well as the IC Notice above. The IC identifiers are:
IC: 216Q-9028 (for M/N: ENWF9408A1EF) IC: 216Q-9028 (for M/N: ENWF9408A2EF) These IC identifiers are valid for all PAN9028 modules see PAN9028 Product Specification for ordering information. In any case, the end product must be labelled on the exterior with:
Contains IC: 216Q-9028. French Obligations dtiquetage Les fabricants dquipements dorigine (FEO) en anglais Original Equipment Manufacturer (OEM) doivent sassurer que les obligations dtiquetage IC du produit final sont remplies. Ces obligations incluent une tiquette clairement visible lextrieur de lemballage externe, comportant lidentifiant IC du module Panasonic inclus, ainsi que la notification ci-dessus. L identifiant IC est:
IC: 216Q-9028 (pour M/N: ENWF9408A1EF) IC: 216Q-9028 (pour M/N: ENWF9408A2EF) Cet identifiant est valide pour tous les modules PAN9028 voir PAN9028 Product Specification pour informations de commande. Dans tous les cas les produits finaux doivent indiquer sur leur emballage externe la mention suivante:
Contient IC: 216Q-9028. Module Integration Guide Rev. 1.0 Page 39 of 45 PAN9028 Wi-Fi/Bluetooth Module 10 Regulatory and Certi 10.3 European Conformity According to RED (2014/53/EU) The PAN9028 modules with model number ENWF9408A1EF and ENWF9408A2EF comply with the standards according to the following LVD (2014/35/EU), EMC-D (2014/30/EU) together with RED (2014/53/EU) articles:
3.1a Safety/Health:
EN 62368-1:2014 EN 62311:2008 3.1b EMC:
EN 301 489-1 V2.2.3 EN 301 489-3 V2.1.2 (Draft) EN 301 489-17 V3.2.4 3.2 Radio:
EN 300 328 V2.2.2 EN 301 893 V2.1.1 EN 300 440 V2.1.1 Due to the model size, the CE marking is displayed in the installation instruction only andit cannot be displayed conform to regulation (EU) No 765/2008 in 5mm height on the modules label due to the limited space. The RED EU Type Examination Certificate No. G0M-2010-9377-V01 issued by the Notified Body 0608 can be used for the OEM end product conformity assessment. If a Notified Body has been contracted for the end product conformity assessment, it should be noted that this EU Type Examination Certificate should be used for conformance assessment. As a result of the conformity assessment procedure described in 2014/53/EU Directive, the end customer equipment should be labelled as follows:
The end customer has to assure that the device has a distance of more than 20cm from the human body under all circumstances. The end customer equipment must meet the actual Safety/Health requirements according to RED. PAN9028 and its model versions in the specified reference design can be used in all countries of the European Economic Area (Member States of the EU, European Free Trade Association States [Iceland, Liechtenstein, and Norway]), Monaco, San Marino, Andorra, and Turkey. Module Integration Guide Rev. 1.0 Page 40 of 45 PAN9028 Wi-Fi/Bluetooth Module 10 Regulatory and Certi 10.3.1 Radio Equipment Directive The Radio Equipment Directive 2014/53/EU (RED) establishes a regulatory framework for placing radio equipment on the market. It ensures a Single Market for radio equipment by setting essential requirements for safety and health, electromagnetic compatibility, and the efficient use of the radio spectrum. The RED aligned the previous Directive, the Radio and Telecommunication Terminal Equipment Directive 1999/5/EC (R&TTED), with the new legislative framework for the marketing of products. The RED is applicable as of 2016-06-13. It included a one-year transitional period, which ended on 2017-06-12 (Article 48). On 2017-06-20, the Commission Implementing Regulation (EU) 2017/1354 was adopted. This specifies how to present the information provided for in Article 10(10) of Directive 2014/53/EU. Article 10(10) RED In cases of restrictions on putting into service or of requirements for authorisation of use, information available on the packaging shall allow the identification of the Member States or the geographical area within a Member State where restrictions on putting into service or requirements for authorisation of use exist. Such information shall be completed in the instructions accompanying the radio equipment. The Commission may adopt implementing acts specifying how to present that information. Those implementing acts shall be adopted in accordance with the advisory procedure referred to in Article 45(2). Class 1:
Radio equipment that can be operated without any restriction in EU, EEA, and EFTA. According to Article 8(1)b of the RED, it is clarified that no national radio interfaces specifications are required to be notified under RED;
Class 2:
Radio equipment subject to restrictions in one or more EU, EEA and EFTA countries where:
The technical parameters are not harmonised through EU, EEA, and EFTA;
The technical parameters are harmonised through EU, EEA and EFTA, and do not fall in above class 1 definition. Radio equipment class means a class identifying particular categories of radio equipment which, under this Directive, are considered similar and those radio interfaces for which the radio equipment is designed. Article 8 RED Notification of radio interface specifications and assignment of radio equipment classes 1:
1) Member States shall notify, in accordance with the procedure set out in Directive 98/34/EC, the radio interfaces which they intend to regulate except:
a) The radio interfaces which fully and without any deviation comply with the Commission decisions on the harmonised use of radio spectrum adopted pursuant to Decision No. 676/2002/EC; and Module Integration Guide Rev. 1.0 Page 41 of 45 PAN9028 Wi-Fi/Bluetooth Module 10 Regulatory and Certi b) The radio interfaces which, in accordance with implementing acts adopted pursuant to paragraph 2 of this Article, correspond to radio equipment which can be put into service and used without restrictions within the Union. 2) The Commission shall adopt implementing acts establishing the equivalence between notified radio interfaces and assigning a radio equipment class, details of which shall be published in the Official Journal of the European Union. Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 45(3). The Radio Interface Specifications Templates are provided for information in the EFIS database for applications which use is in harmonised radio spectrum, however with restrictions. 10.3.2 Equipment Classes The PAN9028 is a radio module classified as class-1 or class-2 radio equipment depending on the frequency band in which it can operate. This equipment class is passed on the end-product which integrates the module. Class 1 Class 1 radio equipment can be placed on the market and put into service without restrictions according to Article 1(3) of Commission Decision 2000/299/EC (Version 2018-01). This radio module is defined as Class 1 radio equipment when it is restricted to operate in the following frequency bands:
Sub-class of Class 1 Application/Reference Frequency Band
(MHz) Transmit Power/Power Density 2 400 to 2 483.5 100mW e.i.r.p and 100mW/100kHz e.i.r.p. density applies when frequency hopping modulation is used, 10mW/MHz e.i.r.p. density applies when other types of modulation are used. 5 725 to 5 875 25mW e.i.r.p. Wideband Data Transmission Systems EN 300 328 Non-Specific Short Range Devices EN 300 440 22 43 Class 2 Class 2 radio equipment are restricted in accordance with Article 1(3) of Commission Decision 2000/299/EC1 if the equipment falls within the scope of Class 2. This radio module is also defined as Class 2 radio equipment when it is restricted to operate in the following frequency bands:
Module Integration Guide Rev. 1.0 Page 42 of 45 PAN9028 Wi-Fi/Bluetooth Module 10 Regulatory and Certi Sub-class of Class 2 H01 Application/Reference Wireless Access Systems including Radio Local Area Networks (WAS/RLANs) Restricted to indoor use EN 301 893 Frequency Band
(MHz) 5 150 to 5350 Transmit Power/Power Density Max. 200mW mean e.i.r.p. and max. 10mW/MHz mean e.i.r.p. density in any 1MHz band. The usage of PAN9028 module in a vehicular environment cannot be considered as indoor use. Module Integration Guide Rev. 1.0 Page 43 of 45 PAN9028 Wi-Fi/Bluetooth Module 10 Regulatory and Certi 10.4 Bluetooth Qualification The PAN9028 series modules are Bluetooth qualified as "Controller Subsystem". Following the qualified design IDs listed for the module:
Bluetooth Project Power Class Model Declaration ID QDID Product Name Controller PAN9028 1 ENWF940xAxEF D052581 172842 Subsystem If the module is combined with a host stack that is Bluetooth qualified as "Host Subsystem" it is possible to list an End Product without any further qualification tests. The OpenSynergy Bluetooth software is commercially available and is delivered in source code format. Applications that are built using the Blue SDK are executed in Linux user space making development easy. The stack software and profiles are qualified components and are listed on the Bluetooth SIG website. Blue SDK v6.x and Low Energy SDK v3.x: QDID 120439 Bluetooth traditional profiles: QDID 117748 Bluetooth Marks According to the Bluetooth SIG, the PAN9028 fulfills the criteria to label your product as a Bluetooth device:
For further information please refer to the Bluetooth website www.bluetooth.com. 10.5 RoHS And REACH Declaration The latest declaration of environmental compatibility (RoHS and REACH) for supplied products can be found on the Panasonic website in the Downloads section of the respective product
11.2 Product Information. Module Integration Guide Rev. 1.0 Page 44 of 45 PAN9028 Wi-Fi/Bluetooth Module 11 Contact Details 11 Contact Details 11.1 Contact Us Please contact your local Panasonic Sales office for details on additional product options and services:
For Panasonic Sales assistance in the EU, visit https://eu.industrial.panasonic.com/about-us/contact-us Email: wireless@eu.panasonic.com For Panasonic Sales assistance in North America, visit the Panasonic website Sales & Support to find assistance near you at https://na.industrial.panasonic.com/distributors Please visit the Panasonic Wireless Technical Forum to submit a question at https://forum.na.industrial.panasonic.com 11.2 Product Information Please refer to the Panasonic Wireless Connectivity website for further information on our products and related documents:
For complete Panasonic product details in the EU, visit http://pideu.panasonic.de/products/wireless-modules.html For complete Panasonic product details in North America, visit http://www.panasonic.com/rfmodules Module Integration Guide Rev. 1.0 Page 45 of 45
1 2 3 4 5 6 | LabelExemption | ID Label/Location Info | 330.45 KiB | September 23 2021 |
REASONING PANASONIC WIFI/BT MODUL PAN9028 WITHOUT FCC ID ON PRODUCT CAUSED BY SIZE RESTRICTIONS In KDB784748D01V09r01 chapter 3 the FCC states the following:
(3) CERTIFICATION For certification, the product shall bear a nameplate or label with the FCC Identifier (FCC ID), as defined in Section 2.925.13 The FCC ID must always be accessible when using the product. The placement of the FCC ID must be a physical label on the product, unless an e-label is used. Physical FCC ID labels must be located on the surface of the product, or within a user-accessible non-detachable compartment (such as the battery compartment). The label shall be permanently affixed, permitting the device to be positively identified. The font needs to be readily legible, consistent with the dimensions of the equipment and its label area. When the device is so small, or for such use that it is impracticable to label with a font size that is four-points or larger (and the device does not utilize electronic labeling), then the FCC ID shall be placed in the user manual, and the FCC ID shall also be placed either on the device packaging or on a removable label attached to the device Definition of point (pt) A computer point (pt) is the smallest unit of measure in typography. It is a subdivision of the larger pica. The contemporary desktop publishing point (also called the PostScript point) was defined as 72 points to the inch (1 point = 172 inches = 25.472 mm = 0.3527 mm). Conversion 4pt to mm 4pt = 0.3527 x 4mm = 1,4108mm The below dimensioned and magnified graphic shows the product with the actual label and a visualized FCC ID printed in 4pt font size. It demonstrates that the FCC ID doesnt fit on the label if printed in 4pt. The brand name, product number, lot code and 2D data matrix code are laser printed in a font smaller than 2pt and are intended to be read by machines (scanner) or in a factory using a microscope. This product is intended to be sold to OEMs only. The OEM is obliged to print on the label of the end product containing this WIFI/BT module the following This product contains transmitter FCC ID: T7V9028 Figure 1 Dimension in mm Module Figure 2 Metal Case Dimension in mm Item Series (Brand) HW/SW Version ENW-No. / Model Name Lot number YYWWDLL Serial Number MAC Address for Wi-Fi Panasonic range BD Address for Bluetooth Panasonic range 2D-code Module Laser Marking Description Description PAN9028 HW/SW M/N: ENWF9408A1EF M/N: ENWF9408A2EF YYWWDLL YY - year last 2 digits WW - calendar week number D - day in week (e.g. Friday is 5) L - line number L - lot in the same day 12345678 0013430B801E MAC Address, 12 digits, hexadecimal count 0013430B801F BD Address, 12 digits, hexadecimal count (e.g. 0013430B801F =>
MAC + 1 hexadecimal) Contains in total 43 characters, seperated by a semicolon. YYWWDLL;SNSNSNSN;MACMACMACMAC;P/N;Hw(Minor)Sw(Minor)
1 2 3 4 5 6 | AutLet | Cover Letter(s) | 50.60 KiB | September 23 2021 |
Panasonic Industrial Devices Europe GmbH Zeppelinstrae 19, 21337 Lneburg Phone +49 (0) 4131 899-0 Fax +49 (0) 4131 899-120 E-Mail: pideu@eu.panasonic.com www.pideu.panasonic.de Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 8/17/2021 To whom it may concern:
We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: T7V9028 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Olaf Knoth Product Safety Panasonic Industrial Devices Europe GmbH Zeppelinstrasse 19 21337 Lueneburg
1 2 3 4 5 6 | ConReq | Cover Letter(s) | 74.17 KiB | September 23 2021 |
Panasonic Industrial Devices Europe GmbH Zeppelinstrae 19, 21337 Lneburg Phone +49 (0) 4131 899-0 Fax +49 (0) 4131 899-120 E-Mail: pideu@eu.panasonic.com www.pideu.panasonic.de Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 8/17/2021 Request for Permanent Confidentiality Company name: Panasonic Industrial Devices Europe GmbH FCC ID: T7V9028 FCC Part 15 Certification Gentlemen, In accordance with CFR 47 0.457 and CFR 47 0.459, Panasonic Industrial Devices Europe GmbH hereby requests confidentiality of following attachments:
(1) schematic diagrams,
(2) detailed block diagrams,
(3) detailed operational descriptions,
(4) parts lists. These documents contain detailed system and equipment description and related information about the product which Panasonic Industrial Devices Europe GmbH considers to be proprietary, confidential and a custom design and otherwise would not release to the general public. Since the design is a basis from which future technological products will evolve, Panasonic Industrial Devices Europe GmbH considers that this information would be of benefit to its competitors and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Sincerely, Signature Olaf Knoth Product Safety Panasonic Industrial Devices Europe GmbH Zeppelinstrae 19 21337 Lneburg
1 2 3 4 5 6 | MAL | Cover Letter(s) | 123.07 KiB | September 23 2021 |
PANASONIC INDUSTRIAL DEVICES EUROPE GmbH Zeppelinstrae 19, 21337 Lneburg Modular Approval Request Letter Date:
FCC ID:
2021-08-17 T7V9028 Telefon +49 (0) 4131 899-0 Telefax +49 (0) 4131 899-120 E-Mail: pideu@eu.panasonic.com www.pideu.panasonic.de Type of Equipment: Wi-Fi Dual Band 2.4/5 GHz and Bluetooth Module Herewith we state that the requirements according to FCC Part 15.212 are met and the module qualifies for a single modular transmitter approval. Conditions met?
(Y/N) Y Realisation / Evidence in FORM 731 application filing The radio portion has his own shielding (see external photos).
Requirement as per 47 CFR Part 15 Subpart C 15.212 i ii iii iv v vi RF shielding The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. Buffered modulation/data inputs The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation. Power supply regulation The modular transmitter must have its own power supply regulation. Antenna requirements The modular transmitter must comply with the antenna and transmission system requirements of 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a unique antenna coupler (at all connections between the module and the antenna, including the cable). Additional justification and details may be requested please refer to KDB 996369 Stand-alone test configuration The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see 15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see 15.31(i)). Labelling The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. Y Y Y Y Y vii Compliance on specific rule or operating requirements The modular transmitter must comply with any specific rules or Y The function has been integrated in the chipset (see operational description) The function has been integrated in the chipset (see operational description) The module comes with one permanently attached antenna. The spurious emission requirements are fulfilled (see attached test report). The module has been tested in a stand-alone configuration (see test report/ test set-up photos) The module has its own label The FCC ID is shown in the User Manual. The instruction for labelling rules for the host device has been stated in the user manual The required FCC rules has been fulfilled and all instructions for 2
. 0
. v H b m G e c v r e S i t c u d o r P s n i f o r u E y b d e d v o r P i PANASONIC INDUSTRIAL DEVICES EUROPE GmbH Zeppelinstrae 19, 21337 Lneburg viii operating requirements that ordinarily apply to a complete the manufacturer must provide adequate transmitter and instructions along with to explain any such the module requirements. A copy of these instructions must be included in the application for equipment authorization. RF Exposure Radio frequency devices operating under the provisions of this part are subject to the radio frequency radiation exposure requirements specified in 1.1307(b), 1.1310, 2.1091, and 2.1093 of for equipment authorization of modular transmitters under this section must contain a statement confirming compliance with these requirements. The modular transmitter must comply with any applicable RF exposure final configuration. this chapter, as appropriate. Applications requirements its in Y Telefon +49 (0) 4131 899-0 Telefax +49 (0) 4131 899-120 E-Mail: pideu@eu.panasonic.com www.pideu.panasonic.de maintaining compliance has been clearly stated in the user manual RF exposure requirements are fulfilled for mobile configuration. The installation of the module is restricted to mobile host devices what is clearly stated in the installation instruction of the user manual. For portable applications OEM integrators need SAR evaluation and an own FCC ID. Olaf Knoth Safety Manager Panasonic Industrial Devices Europe GmbH Zeppelinstrae 19 21337 Lueneburg Germany 2
. 0
. v H b m G e c v r e S i t c u d o r P s n i f o r u E y b d e d v o r P i
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2022-05-05 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | Class II Permissive Change |
2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
3 | 2422 ~ 2452 | DTS - Digital Transmission System | ||
4 | 2021-09-23 | 2422 ~ 2452 | DTS - Digital Transmission System | Original Equipment |
5 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | ||
6 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 5 6 | Effective |
2022-05-05
|
||||
1 2 3 4 5 6 |
2021-09-23
|
|||||
1 2 3 4 5 6 | Applicant's complete, legal business name |
Panasonic Industrial Devices Europe GmbH
|
||||
1 2 3 4 5 6 | FCC Registration Number (FRN) |
0014980072
|
||||
1 2 3 4 5 6 | Physical Address |
Zeppelinstrasse 19
|
||||
1 2 3 4 5 6 |
Lueneburg, N/A
|
|||||
1 2 3 4 5 6 |
Germany
|
|||||
app s | TCB Information | |||||
1 2 3 4 5 6 | TCB Application Email Address |
j******@eurofins.de
|
||||
1 2 3 4 5 6 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 3 4 5 6 | Grantee Code |
T7V
|
||||
1 2 3 4 5 6 | Equipment Product Code |
9028
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 5 6 | Name |
O**** K********
|
||||
1 2 3 4 5 6 | Title |
Product Safety
|
||||
1 2 3 4 5 6 | Telephone Number |
+49-4******** Extension:
|
||||
1 2 3 4 5 6 | Fax Number |
+49-4********
|
||||
1 2 3 4 5 6 |
o******@eu.panasonic.com
|
|||||
app s | Technical Contact | |||||
1 2 3 4 5 6 | Firm Name |
Panasonic Industrial Devices Europe GmbH
|
||||
1 2 3 4 5 6 | Name |
D****** G********
|
||||
1 2 3 4 5 6 | Physical Address |
Zeppelinstrasse 19
|
||||
1 2 3 4 5 6 |
Lueneburg, 21337
|
|||||
1 2 3 4 5 6 |
Germany
|
|||||
1 2 3 4 5 6 | Telephone Number |
+49 4********
|
||||
1 2 3 4 5 6 |
+49 ********
|
|||||
1 2 3 4 5 6 |
D******@eu.panasonic.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 5 6 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 5 6 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 5 6 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 5 6 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
1 2 3 4 5 6 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 4 5 6 | DTS - Digital Transmission System | |||||
1 2 3 4 5 6 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wi-Fi Dual Band 2.4/5 GHz and Bluetooth Module | ||||
1 2 3 4 5 6 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 4 5 6 | Modular Equipment Type | Limited Single Modular Approval | ||||
1 2 3 4 5 6 | Single Modular Approval | |||||
1 2 3 4 5 6 | Purpose / Application is for | Class II Permissive Change | ||||
1 2 3 4 5 6 | Original Equipment | |||||
1 2 3 4 5 6 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 5 6 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 5 6 | Grant Comments | Full modular approval. Output power listed is conducted. This device supports 802.11a, 802.11n, 802.11ac with a 20 MHz bandwidth mode and 802.11n, 802.11ac with a 40 MHz bandwidth mode and 802.11ac with an 80 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Host product manufacturers must follow the instructions according to KDB 996369 D04 to demonstrate compliance with the FCC rules. C2PC: Listing of additional antenna. | ||||
1 2 3 4 5 6 | Full modular approval. Output power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Host product manufacturers must follow the instructions according to KDB 996369 D04 to demonstrate compliance with the FCC rules. C2PC: Listing of additional antenna. | |||||
1 2 3 4 5 6 | Full modular approval. Output power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Host product manufacturers must follow the instructions according to KDB 996369 D04 to demonstrate compliance with the FCC rules. C2PC: Listing of additional antenna. | |||||
1 2 3 4 5 6 | Full modular approval. Output power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Host product manufacturers must follow the instructions according to KDB 996369 D04 to demonstrate compliance with the FCC rules. | |||||
1 2 3 4 5 6 | Full modular approval. Output power listed is conducted. This device supports 802.11a, 802.11n, 802.11ac with a 20 MHz bandwidth mode and 802.11n, 802.11ac with a 40 MHz bandwidth mode and 802.11ac with an 80 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Host product manufacturers must follow the instructions according to KDB 996369 D04 to demonstrate compliance with the FCC rules. | |||||
1 2 3 4 5 6 | Full modular approval. Output power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Host product manufacturers must follow the instructions according to KDB 996369 D04 to demonstrate compliance with the FCC rules. | |||||
1 2 3 4 5 6 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 5 6 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 5 6 | Firm Name |
Eurofins Product Service GmbH
|
||||
1 2 3 4 5 6 | Name |
J******** K****
|
||||
1 2 3 4 5 6 | Telephone Number |
49-33********
|
||||
1 2 3 4 5 6 | Fax Number |
49-33********
|
||||
1 2 3 4 5 6 |
j******@eurofins.de
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | CC | 5180 | 5240 | 0.068 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | CC | 5745 | 5825 | 0.01 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0037000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 2402 | 2480 | 0.002 | |||||||||||||||||||||||||||||||||||
3 | 2 | 15C | CC | 2412 | 2462 | 0.293 | |||||||||||||||||||||||||||||||||||
3 | 3 | 15C | CC | 2422 | 2452 | 0.249 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15C | CC | 2402 | 2480 | 0.002 | |||||||||||||||||||||||||||||||||||
4 | 2 | 15C | CC | 2412 | 2462 | 0.293 | |||||||||||||||||||||||||||||||||||
4 | 3 | 15C | CC | 2422 | 2452 | 0.249 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
5 | 1 | 15E | CC | 5180 | 5240 | 0.068 | |||||||||||||||||||||||||||||||||||
5 | 2 | 15E | CC | 5745 | 5825 | 0.01 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
6 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0037000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC