FCC ID: NWJ23C002A GSM Cellular Mobile Radio with Bluetooth

X800_Safety first_1213.fm Page 1 Monday, December 13, 2004 4:34 PM Safety first Your new phone is a convenient and effective communications tool, but it can be hazardous when used improperly. To avoid harming yourself or anyone else, please review the following information before using your phone. Batteries Batteries can cause property damage, injury, or burns if the terminals are touched with a conductive material (for example, metal jewellery, keys, and so on). Therefore, use caution when handling a charged battery. Additional precautions and notes are listed below:

Never throw a battery into a fire; it may explode. Fully recharge the battery if the battery is low or as soon as the low-battery alert beeps. Do not drop the battery. Do not allow bridging of battery contacts with metallic objects. Do not remove the battery from the phone while the phone is powered on. Settings you have changed may revert to their previous settings. A recyclable lithium ion/polymer battery powers your phone. Please call 1-800-8-BATTERY for information on how to recycle the battery. Charging devices Use only Genuine Panasonic charging accessories. Use of attachments not recommended by Panasonic or your Service Provider may result in fire, electrical shock, or injury. Panasonic is not responsible for damage caused by using non-Panasonic accessories. Do not expose charging adapters to moisture, water, or the weather. Do not use an adapter with a damaged cord. When using a DC adapter in an automobile, a small amount of electricity flows through the adapter, even if the phone is turned off. Remove the plug from the cigarette lighter whenever the phone will be left in the vehicle for long periods of time. Always charge the battery in a well ventilated area, not in direct sunlight, between 41F (5C) and 95F (35C). It is not possible to recharge the battery if it is outside this temperature range. Do not incinerate or dispose of the battery as ordinary trash. The battery must be disposed of in accordance with local legislation and may be recycled. Caution: The cigarette lighter must have a 12V negative ground socket. Do not use the adapter in a vehicle that has a positive ground system. General Do not use the phone in extreme temperature or humidity. The specified operating temperature range is -22F to +140F (-30C to +60C). Extreme temperatures may have a temporary effect on the operation of your phone. This is normal and does not indicate a fault. Do not expose the phone (particularly the display) to direct sunlight for extended periods of time or to a humid, dusty or hot area. Do not attempt to disassemble the phone. There are no user-serviceable parts inside. 1 X800_Safety first_1213.fm Page 2 Monday, December 13, 2004 4:34 PM Do not subject the equipment to excessive vibration or shock. Do not expose the phone to rain or spill liquids on it. If the equipment becomes wet immediately remove the battery and charging device and contact your dealer. Do not use any accessories other than those designed for use with your phone. Use of attachments not recommended or sold by Panasonic or your Service Provider may result in fire, electrical shock, or injury. Panasonic is not responsible for damages caused by using non-Panasonic accessories. Pressing any of the keys may produce a loud tone. Avoid holding the phone close to Keep metallic items that may accidentally touch the battery terminals away from the the ear while pressing the keys. equipment. Battery damage may occur. When disposing of any packing materials or old equipment check with your local authorities for information on recycling. If connecting the phone to an external source, read the operating instructions of the equipment for the correct connection and safety precautions. If connecting the phone to an external source, verify that the phone is compatible with the product to which you are connecting it. Availability of service This phone, like any wireless phone, operates using radio signals, wireless and landline networks, and user-programmed functions. Because of this, connection in all conditions cannot be guaranteed. Therefore, you should never rely solely on any wireless phone for essential communications (for example, medical emergencies). Emergency (911) service If you need to make an emergency (911) call, power the phone on, dial 911, and press D. Emergency calls can be made regardless of lock setting and with or without a SIM card. Remember, to make or receive any call, the phone must be switched on and in a service area that has adequate signal strength. Even if you are within the coverage area of your Service Provider, you may be in an area with insufficient signal strength to place a 911 call. Emergency calls might not be possible on all wireless phone networks or when certain network service and/or phone features are in use. 2 X800_Safety first_1213.fm Page 3 Monday, December 13, 2004 4:34 PM Safety tips Following the suggestions in this section will help ensure safe and efficient operation of your Panasonic phone. This Model Phone Meets The Governments Requirements For Exposure To Radio Waves. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 0.412 W/kg and when worn on the body, as described in this user guide, is 0.200 W/kg. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID NWJ23C002A. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.com. Caution: All Panasonic branded accessories are tested and comply with FCC RF exposure requirements. Non-Panasonic accessories may not comply. 3 X800_Safety first_1213.fm Page 4 Monday, December 13, 2004 4:34 PM Body-worn operation This device was tested for body-worn operations with the back of the phone kept 1.5 cm. from the body. To maintain compliance with FCC RF exposure requirements, use only belt-clips, holsters or similar accessories that maintain a 1.5 cm. separation distance between the users body and the back of the phone. The use of belt-clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Antenna care This mobile phone incorporates an internal antenna for radio communisation. Do not use the phone if it is damaged. Unauthorized antennas, modifications, or attachments could damage the phone and may violate FCC regulations. Driving Important: Check the laws and regulations on the use of wireless telephones in the areas where you drive. Always obey them. Also, if using your phone while driving:

Give full attention to driving - driving safely is your first responsibility;

Use handsfree operation, if available;

Pull off the road and park before making or answering a call if driving conditions so require. Electronic devices Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone. Pacemakers: The Health Industry Manufacturers Association recommends that a minimum separation of 6 inches (6) or 15 centimeters (15 cm) be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations of Wireless Technology Research. Persons with pacemakers:

Should ALWAYS keep the phone more than six inches from their pacemaker when the phone is turned ON;

Should not carry the phone in a breast pocket;

Should use the ear opposite the pacemaker to minimize the potential for interference;

If you have any reason to suspect that interference is taking place, turn your phone OFF immediately. 4 X800_Safety first_1213.fm Page 5 Monday, December 13, 2004 4:34 PM Hearing Aids: Some digital wireless phones may interfere with some hearing aids. In the event of such interference, consult your Service Provider and hearing aid manufacturer. Other Medical Devices: If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Vehicles: RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. Posted Facilities: Turn your phone OFF in any facility where posted notices so require. Aircraft FCC regulations prohibit using your phone while in the air; switch off your phone before boarding an aircraft unless otherwise advised by airline personnel. Blasting areas To avoid interfering with blasting operations, turn your phone OFF when in a blasting area or in other areas posted: Turn off two-way radio. Obey all signs and instructions. Potentially explosive atmospheres Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include fueling areas such as gas stations; below deck on boats; fuel or chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust or metal powders; and any other area where you would normally be advised to turn off your vehicle engine. For vehicles equipped with an air bag An air bag inflates with great force. DO NOT place objects, including both installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. For U.S. Customers: Vehicles using liquefied petroleum gas (such as propane or butane) must comply with the National Fire Protection Standard (NFPA-58). For a copy of this standard, contact:

National Fire Protection Association One Batterymarch Park PO Box 9101 Quincy, MA 02269 Phone: 1-800-344-3555 Web site: www.nfpa.org E-mail address: Custserv@NFPA.org 5 F C C / C E / I C S T A T E M E N T S DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Panasonic Mobile Communications Co., Ltd., declare under our sole responsibility that the product, EB-VS7 to which this declaration relates, this device complies with Part 15 of the FCCRules. Operation is subject to the to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Exposure to Radio Frequency Radiation. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection. This equipment generates, uses and can radiated radio frequency energy and, If not installed and used in accordance with the instructions, may cause 28 F C C / C E / I C S T A T E M E N T S harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Modifications The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Panasonic may void the users authority to operate the equipment. Canada-Industry Canada (IC) The wireless radio of this device complies with RSS 139 & RSS 210 Industry Canada. This Class B digital complies with Canadian ICES-003. Cet appareil numrique de la classe B conforme la norme NMB-003 du Canada. Europe-European Union Notice Radio products with the CE 0560 or CE alert marking comply with the R&TTE Directive (1995/5/EC) issued by the Commission of the European Community. 29 TEN (10) DRIVER SAFETY TIPS Your wireless telephone gives you the powerful ability to communicate by voice-almost anywhere, anytime. But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold. When driving a car, driving is your first responsibility. When using your wireless phone behind the wheel of a car, practice good common sense and remember the following tips:

1. Get to know your wireless phone and its features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road. 2. When available, use a hands free device. If possible, add an additional layer of convenience and safety to your wireless phone with one of the many hands free accessories available today. 3. Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you get an incoming call at an inconvenient time, if possible, let your voice mail answer it for you. 4. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous. 5. Do not take notes or look up phone numbers while driving. Jotting down a "to do"

list or flipping through your address book takes attention away from your primary responsibility, driving safely. 6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue. 7. Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that have the potential to divert your attention from the road. 8. Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone!

9. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you. 10. Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number.

"The wireless industry reminds you to use your phone safely when driving."

For more information, please call 1-888-901-SAFE or visit www.wow-com.com Information on this page provided by the Cellular Telecommunications Industry Association. 6 Safety First VS7_AAA.book Page i Wednesday, August 3, 2005 5:10 PM VS7 Operating Instructions Contents Contacts.........................41 Contacts menu structure.......41 Viewing the Contacts list.......42 Making a call from Introduction .................... 1 Safety considerations............. 1 Care and maintenance........... 5 About this manual .................. 7 About Your Phone........ 10 Phone overview.................... 10 Key functions........................ 12 Display ................................. 15 DRM..................................... 17 Indicator/Illumination Light ... 18 Getting Started ............. 19 Installing the SIM card and the battery ........................ 19 Charging the battery............. 21 Opening/closing the phone .. 23 Switching the phone on/off... 23 Menu Navigation........... 24 Main menu structure ............ 24 Displaying the menu............. 25 Navigating the applications .. 26 Basic Operations.......... 27 Making calls ......................... 27 Answering calls .................... 29 Silent mode .......................... 31 Voicemail.............................. 31 In-call operations.................. 32 Multiple calls operations....... 34 Text entry ............................. 36 Contacts............................43 Adding contacts ....................44 Editing a Contacts card.........46 Call log..................................47 Speed dial.............................48 Groups..................................49 Advanced..............................49 Service numbers...................52 Messages .......................53 Messages menu structure ....53 Creating a new message......54 Receiving messages.............59 Inbox.....................................60 Archive..................................64 Web mail...............................65 Chat ......................................66 Voicemail ..............................66 Messages settings................67 Memory status ......................69 Camera ...........................70 Camera menu structure........70 Picture...................................71 Video.....................................77 i VS7_AAA.book Page ii Wednesday, August 3, 2005 5:10 PM Games.......................... 143 Games menu structure....... 143 Games................................ 144 Download games ............... 146 Settings .............................. 147 Information ......................... 147 Appendix ..................... 148 Accessories........................ 148 CD-ROM ............................ 152 Changing the X-Changeable CoverTM .......................... 153 Troubleshooting ................. 154 Glossary of terms ............... 157 Specifications ..................... 158 Licensing..................... 160 Index ............................ 164 Contents Browser ......................... 81 Browser menu structure .......81 Setting up your Browser .......81 Viewing the contents ............82 Browser options....................83 Settings ......................... 89 Settings menu structure........89 Phone settings......................90 Display settings ....................96 Sounds & alerts ....................99 Calls....................................101 Connectivity........................105 Security...............................117 Tools............................ 120 Tools menu structure..........120 SIM Tool Kit ........................121 Alarms ................................121 Sound recorder...................123 Calculator ...........................124 Calendar ...................... 125 Browsing Calendar .............125 Creating Calendar events...127 Managing Calendar events..129 My Media ..................... 131 My Media menu structure ...131 Pictures...............................132 Sounds ...............................136 Videos.................................139 Games................................140 Text templates....................141 Memory status....................142 ii VS7_AAA.book Page 1 Wednesday, August 3, 2005 5:10 PM Introduction Thank you for purchasing this Panasonic digital cellular phone. This phone is designed to operate on GSM networks GSM900, GSM1800 and GSM1900. It also supports GPRS for packet data connections. Please ensure the battery is fully charged before use. We, Panasonic Mobile Communications Development of Europe Ltd., declare that the EB-VS7 conforms with the essential and other relevant requirements of the directive 1999/5/EC. A declaration of conformity to this effect can be found at http://panasonic.co.jp/pmc/products/en/support/index.html Safety considerations The following information should be read and understood as it provides details, which will enable you to operate your phone in a manner which is both safe to you and your environment, and conforms to legal requirements regarding the use of cellular phones. Power This equipment should only be charged with approved charging equipment to ensure optimum performance and avoid damage to your phone. Other usage will invalidate any approval given to this apparatus and may be dangerous. Ensure the voltage rating of the Travel charger is compatible with the area of use when travelling abroad. A Travel charger (EB-CA001xx*) is supplied with the Main Kit. Note* xx identifies the charger region, e.g. CN, EU, UK, AU, US. Battery Use of another battery pack than that recommended by the manufacturer may result in a safety hazard. If you use a feature which keeps the key backlight on continuously for a long time, such as a game or browser, battery life will become extremely short. To maintain longer battery life, set the Key backlight to off. (See Key backlight on page 93.) Do not use this phone without the battery cover attached. 1 VS7_AAA.book Page 2 Wednesday, August 3, 2005 5:10 PM Introduction Disposing of the Battery Do not incinerate or dispose of the battery as ordinary rubbish. The battery must be disposed of in accordance with local regulations and may be recycled. Aircraft Switch off your cellular phone when in an aircraft. Ensure that the settings of the alarm functions will not contravene regulations whereby it may automatically power on when in an aircraft or medical facility etc. The use of cellular phones in an aircraft may be dangerous to the operation of the aircraft, disrupt the cellular network and may be illegal. Failure to observe this instruction may lead to the suspension or denial of cellular phone services to the offender, or legal action or both. Do Not Use It is advised not to use the equipment at a refuelling point. Users are reminded to observe restrictions on the use of radio equipment in fuel depots, chemical plants or where blasting operations are in progress. Never expose the battery to extreme temperatures (in excess of 60C). Driving It is imperative that the driver exercises proper control of the vehicle at all times. Do not hold a phone while you are driving; find a safe place to stop first. Do not speak into a handsfree microphone if it will take your mind off the road. Always acquaint yourself thoroughly with restrictions concerning the use of cellular phones within the area where you are driving and observe them at all times. Electronic Devices Care must be taken when using the phone in close proximity to personal medical devices, such as pacemakers and hearing aids. 2 VS7_AAA.book Page 3 Wednesday, August 3, 2005 5:10 PM Introduction Heating Equipment When your handset, the accompanying battery or charging accessories are wet, do not put those in any type of heating equipment, such as a microwave oven, a high pressure container, or a drier or similar. It may cause the battery, handset and/

or charging equipment to leak, heat up, expand, explode and/or catch fire. Moreover, the product or accessories may emit smoke and their electrical circuits may become damaged and cause the products to malfunction. Panasonic is not responsible for any and all damages, whether direct or indirect, howsoever caused by any misuse. Backup Copies & Security It is recommended that you create a copy or backup, as appropriate, of any important information and data which you store in your phones memory. In order to avoid accidental loss of data, please follow all instructions relating to the care and maintenance of your phone and its battery. Your phone has the capability of storing and communicating personal information. It is recommended that you take care to ensure that any personal or financial information is stored separately from your phone. You should use security features, such as the SIM lock to protect information held in your phone. Panasonic accepts no liability for any and all losses howsoever arising from any loss of data, including but not limited to direct and indirect losses (to include, but not limited to consequential loss, anticipated savings, loss of revenue). Downloading Your phone has the capability of downloading and storing information and data from external sources. It is your responsibility to ensure that in doing this you are not infringing any copyright laws or other applicable legislation. Panasonic accepts no liability for any and all losses howsoever arising from any loss of data or any such infringement of copyright or intellectual property rights, including but not limited to direct and 3 VS7_AAA.book Page 4 Wednesday, August 3, 2005 5:10 PM Introduction indirect losses (to include, but not limited to consequential loss, anticipated savings, loss or revenues). Efficient Use For most efficient use, hold the phone as you would any normal phone. To avoid deterioration of signal quality or antenna performance, do not touch or cup the antenna area while the phone is switched on. Unauthorised modifications or attachments may damage the phone and violate applicable regulations. The use of an unapproved modification or attachment may result in the invalidation of your guarantee this does not affect your statutory rights. Camera You are advised to take appropriate care over the use of the internal camera. It is your responsibility to ensure that you have permission to take photographs of people and objects and that you do not infringe any personal or third party rights when using the camera. You must comply with any applicable international or national law or other special restrictions governing camera use in specific applications and environments. This includes not using the camera in places where the use of photographic and video equipment may be prohibited. Panasonic accepts no liability for any and all losses howsoever arising from any infringement of copyright or intellectual property rights, including but not limited to direct and indirect losses. Do not leave the camera facing direct sunlight, as this may impair its performance. Other important information The colour liquid crystal display (LCD) uses high-precision production technology, and in certain circumstances pixels may appear brighter or darker. This is due to characteristics of the LCD and is not a manufacturing defect. This phone is designed, manufactured and tested to ensure that it complies with the specifications covering RF exposure guidelines 4 VS7_AAA.book Page 5 Wednesday, August 3, 2005 5:10 PM Introduction applicable at the time of manufacture, in accordance with EU, USA FCC and Australian ACA regulations. This phone should only be used with Panasonic approved accessories to ensure optimum performance and avoid damage to your phone. Panasonic is not responsible for damage caused by using non-Panasonic approved accessories. This phone must be used in compliance with any applicable international or national law or any special restrictions governing its use in specified applications and environments. This includes but is not limited to use in hospitals, aircraft, whilst driving and any other restricted uses. Some of the contents described in this manual are subject to change without notice. Care and maintenance Pressing any of the keys may produce a loud tone. Avoid holding the phone close to the ear while pressing the keys. Extreme temperatures may have a temporary effect on the operation of your phone. This is normal and does not indicate a fault. The display quality may deteriorate if the phone is used in environments over 40C for a long time. Do not modify or disassemble the equipment. There are no user serviceable parts inside. Do not subject the equipment to excessive vibration or shocks. Do not drop the battery. 5 VS7_AAA.book Page 6 Wednesday, August 3, 2005 5:10 PM Introduction Avoid contact with liquids or moisture. If the equipment becomes wet, immediately remove the battery and charger. Keep the phone dry. Do not leave the equipment in direct sunlight or a humid, dusty or hot area. Never throw a battery into a fire. It may explode. Keep metallic items that may accidentally touch the terminals away from the equipment/battery. Batteries can cause property damage, injury, or burns if terminals are touched with a conductive material (i.e. metal jewellery, keys, etc.). Always charge the battery in a well ventilated area, not in direct sunlight, between +5C and +35C. It is not possible to recharge the battery if it is outside this temperature range. When connecting the phone to an external source, read the operating instructions of the equipment for the correct connection and safety precautions. Ensure the phone is compatible with the product it is being connected to. When disposing of any packing materials or old equipment, check with your local authorities for information on recycling. 6 VS7_AAA.book Page 7 Wednesday, August 3, 2005 5:10 PM Introduction About this manual Symbols used in this manual The following symbols are used in this manual to represent the limited availability of the function or service.

= Depending on your SIM card.

= Depending on network availability.

= Depending on your network operator. The service may only be available on a subscription basis. Graphics The graphic elements in this manual are for illustrative purposes and may differ from the actual phone and/or graphic elements displayed on the phone. Panasonic reserves the right to change the information in this manual without prior notice. Keys Keys in this manual may differ from the actual keys on your phone. Refer to page 12 for the icons that represent the keys in this manual. 7 VS7_AAA.book Page 8 Wednesday, August 3, 2005 5:10 PM Introduction How to read this manual

<Example> Fixed dial in Settings menu on page 118. This function is SIM card dependent. For other symbols, refer to page 7. d Menu navigation Before following the steps, you need to enter Main menu, then move through the sub menus, described next to the d icon. > means scroll through the menu and select. 8 VS7_AAA.book Page 9 Wednesday, August 3, 2005 5:10 PM Introduction In the example:

From Main menu, press Navigation key (up/down/left/right) to scroll to Settings and press Navigation key (centre). Press Navigation key

(up/down) to scroll to Security and press Navigation key (centre) or Left Soft key (Select)*1. Press Navigation key (up/down) to scroll to Fixed dial and press Navigation key (centre) or Left Soft key

(Select)*1. You can also select Fixed dial by pressing [D]. Now you can continue onto the step 1:

1. Press Navigation key (up/down) to scroll to Enable or Disable, then press Navigation key (centre) or Left Soft key (Select)*1 2. Enter the PIN2 code (4-8 digits), then press Navigation key

(centre) or Left Soft key (Ok)*1

*1 The word is shown in the lower left hand corner of the display, indicating a command that the key gives to the phone when you press it. Note: There are several ways to select items from menu lists. See Menu selection method on page 26. 9 VS7_AAA.book Page 10 Wednesday, August 3, 2005 5:10 PM About Your Phone Phone overview Earpiece Main Display Macro Mode Switch Navigation key Right Soft key Power/End key Silent Mode key Microphone One Push Auto Open button Left Soft key Call key Asterisk key Charging Indicator 10 VS7_AAA.book Page 11 Wednesday, August 3, 2005 5:10 PM About Your Phone Speaker Multi Function key Infrared Port Side-up key Side-down key Camera Lens Indicator/

Illumination Light Front display 11 Personal Handsfree Connector/

Charging Connector/

Data Transmission Connector VS7_AAA.book Page 12 Wednesday, August 3, 2005 5:10 PM About Your Phone Key functions Key name Function Key icon*1 Press outside edges to scroll up [1], down [2], left [3] or right [4] to move through menus and text. Press centre [0]

to select option, perform Alert mute, or take a picture or record a video clip in Camera mode. Perform the functions indicated by the text shown in the lower left-hand corner of the display. Perform the functions indicated by the text shown in the lower right-hand corner of the display. Make or answer a call. Press and hold to switch the phone on/off. End or reject a call. Return to standby mode. Enter numbers and characters. Press and hold [S]-[K] for Speed dialling. Press and hold [L] to enter the international prefix

(+). Enter e. In text entry mode, press to change the letter case, or press and hold to change the input method. Enter r. Press and hold to switch the Silent mode on/off. While entering a phone number, press and hold to enter a pause (p). Scroll page up. Increase volume or zoom level. Perform Alert mute. Scroll page down. Decrease volume or zoom level. Perform Alert mute.

[1] [2]

[3] [4]

[0]

[5]

[6]

[q]

[Y]

[L] to [K]

[e]

[r]

[O]

[P]

Navigation key Left Soft key Right Soft key Call key Power/End key Numeric keys Asterisk key Silent Mode key Side-up key*2 Side-down key*2 12 VS7_AAA.book Page 13 Wednesday, August 3, 2005 5:10 PM About Your Phone Key name Multi Function key*2 Function Take a picture or record a video clip in Camera mode. Perform Alert mute. Key icon*1

[U]

*1 The key icons given in the table represent the actual keys on the phone.

*2 Located on the right side of the phone. Quick keys You can easily access features instead of navigating through the menus. In standby mode Short press Long press Key

[0]

[5]

[6]

Function Open Main menu/Keyguard off Open Messages menu Open Browser

[1]9[2]9[3]9[4] Open the shortcut menu

[q]

[O]9[P]

[0]

[A]

[S]-[K]

[r]

[U]

Open Call log Increase/decrease the volume Keyguard on Dial your voice mailbox Speed dial Silent mode on/off Switch to Picture mode 13 VS7_AAA.book Page 14 Wednesday, August 3, 2005 5:10 PM About Your Phone Key Function During a call Short press In Menu list Short press

[1]9[4]9[O]

[2]9[3]9[P]

[U]

[q]

[A]-[K]

[e]

[L]

[r]

Increase the volume Decrease the volume Start/stop sound recording Switch between hold and unhold on one call or switch between one active and one held call Select Menu A-K Select Menu e Select Menu L Select Menu r 14 VS7_AAA.book Page 15 Wednesday, August 3, 2005 5:10 PM About Your Phone Display Main display (in standby mode) Signal strength icon Battery charge level icon Time Date Wallpaper Left Soft key selection area Right Soft key selection area Note: The current operator name is shown on standby display. You can change the position of the operator name. See Operator name on page 96. Front display (in standby mode) Signal strength icon External Wallpaper Battery charge level icon 15 VS7_AAA.book Page 16 Wednesday, August 3, 2005 5:10 PM About Your Phone Status icons The status icons are displayed or animated according to the currently activated functions. Icon Meaning Signal strength; the more bars visible, the stronger the signal In roaming area Battery charge level Battery is charging GPRS is available Silent profile is active Meeting profile is active Outdoor profile is active Car profile is active SMS message storage area is full MMS message storage area is full JavaTM application is suspended Unread SMS message Unread MMS message Unread WAP Push message Call diverts is on Infrared is active Bluetooth is active 16 VS7_AAA.book Page 17 Wednesday, August 3, 2005 5:10 PM About Your Phone Icon Meaning Bluetooth headset or handsfree is connected USB connection is available New voicemail received All tones are off Vibration alert is on Alarm is set Non-secure CSD connection Secure CSD connection Non-secure GPRS connection Secure GPRS connection Keyguard is on DRM Your phone has DRM (Digital Right Management) that is used to control actions such as sending downloaded ringtones, graphics and sound clips to other people. Files downloaded and indicated by the icon (

restriction includes use of such files for a limited period of time only or specified number of times. To check the status of your rights, e.g. expiration date or number of times it can be used, see Details setting on page 133, 137 and 144. For further information, contact your service provider.

) can be used with restriction enforced by suppliers. The 17 VS7_AAA.book Page 18 Wednesday, August 3, 2005 5:10 PM About Your Phone Indicator/Illumination Light The Indicator/Illumination Light flashes or beams when the events in the table below occur. To specify the illumination colours for the events, see Illuminations on page 92. Events Description When you are receiving a call/

missed calls When you receive an SMS/MMS message When you receive a WAP Push message When you are having a conversation When the flip is closed When the battery is charging When data is being transferred Schedule notification Alarm Flash or beam in the selected colour. To set a different illumination colour for respective contacts, see Storing a contact in your phone on page 44. Flash or beam in the selected colour. Flash in the specified colour. Beam in the specified colour. See Creating Calendar events on page 127 or Setting the alarm on page 121. Note:

If the Indicator/Illumination Light is set to on for battery charging and the phone is switched on, the Indicator/Illumination Light illuminates during charging. If the phone is switched off, the Indicator/Illumination Light will not illuminate. 18 VS7_AAA.book Page 19 Wednesday, August 3, 2005 5:10 PM Getting Started Installing the SIM card and the battery The SIM (Subscriber Identity Module) card and the battery must be installed before using your phone. Before handling the SIM card and the battery, ensure that the phone is switched off and the charger is disconnected from the phone. Inserting/removing the SIM card See Inserting/removing the battery on page 20 to remove the battery cover and the battery. Inserting the SIM card Position the SIM card as shown, with gold contacts facing down and the notched corner turned to the right. Carefully slide the SIM card into the SIM card pocket until the card is all the way seated. Removing the SIM card Place a finger on the bottom edge of the SIM card and gently slide it out. 19 VS7_AAA.book Page 20 Wednesday, August 3, 2005 5:10 PM Getting Started Inserting/removing the battery Inserting the battery 1. Insert the small tabs at the top of the battery into the notch at the top of the battery compartment. Ensure the 3 gold contacts align with the 3 gold pins in the phone. 2. Replace the cover on the phone. Make sure the cover clicks into place. Removing the battery 1. Place your finger on the small bar at the top of the cover. Slide the cover slightly toward the bottom of the phone, then lift the cover off the phone. 2. Place your finger on the tab at the base of the battery. Lift the battery off the compartment. 20 VS7_AAA.book Page 21 Wednesday, August 3, 2005 5:10 PM Getting Started Charging the battery Your phone can be charged either when it is switched on or off. You can use your phone even while it is charging. Ensure that the battery is inserted into the phone before charging. 1. Open and hold the connector cover. Connect the charger to Charging Connector, then connect the charger to the mains power supply. 2. When charging is complete, disconnect the charger from the outlet before removing the plug from the phone. Then hold the connector cover and press and hold the release buttons on both sides of the connectors end and pull gently to disconnect the charger from the phone. After you have removed the Charging Connector, replace the connector cover over the socket. Note: DO NOT force the connector as this may damage the phone and/or the charger. If the battery has been deeply discharged, it may take several minutes before the Battery charge level indicator is displayed. 21 VS7_AAA.book Page 22 Wednesday, August 3, 2005 5:10 PM Getting Started Battery charge level indicator While charging Charging complete Charging Indicator goes out when charging is completed. Low battery warning When the battery power is low, a Battery low message is displayed and a warning tone sounds. The phone automatically switches off after the tone. Fully recharge the battery. If you receive the low battery warning during a conversation, charge your phone to continue with the conversation. 22 VS7_AAA.book Page 23 Wednesday, August 3, 2005 5:10 PM Getting Started Opening/closing the phone You can open your phone by pressing One Push Auto Open button. One Push Auto Open button Flip setting When Active flip setting is set to On (see page 103), you can answer a call by opening the phone and end a call by closing the phone. When One push SMS setting is set to On (see page 67), new SMS messages can be displayed by opening the flip. Switching the phone on/off 1. Press and hold [Y] for several seconds to switch the phone on A greeting may be displayed and the phone enters standby mode. 2. Press and hold [Y] for several seconds to switch the phone off If your SIM card is PIN protected, your PIN code will be requested. Note:

Enter the PIN code and [0]9[5] (Ok). See Security on page 117. DO NOT switch off the phone while resetting/downloading/deleting a file or running/terminating a JavaTM application. 23 VS7_AAA.book Page 24 Wednesday, August 3, 2005 5:10 PM Menu Navigation Main menu structure Games Games ...................144 Download*1 ............146 Settings ..................147 Information .............147 My Media Pictures ................. 132 Sounds .................. 136 Videos.................... 139 Games................... 140 Text templates ....... 141 Memory status....... 142 Calendar ...........125 Browser PANASONIC BOX ... 81 Camera Picture......................71 Video........................77 Messages Create new .............. 54 Inbox........................ 60 Archive .................... 64 Web mail*1............... 65 Chat*1...................... 66 Voicemail ................. 66 Messages settings... 67 Memory status......... 69 Tools SIM tool kit*2 ..........121 Alarms....................121 Sound recorder ......123 Calculator...............124 Contacts Contacts list ............. 42 Add contact.............. 44 Call log .................... 47 Speed Dial list.......... 48 View groups............. 49 Advanced ................ 49 Service numbers*1*2 52 Settings Phone settings ......... 90 Display settings........ 96 Sounds & alerts........ 99 Calls....................... 101 Connectivity ........... 105 Security.................. 117 24

*1

*2 VS7_AAA.book Page 25 Wednesday, August 3, 2005 5:10 PM Menu Navigation Displaying the menu The menu system allows you to access functions which do not have their own dedicated buttons on the keypad. In standby mode:

1.

[0]

Main menu appears with 9 menu options. (See Main menu structure on page 24.)

[1929394] to scroll to the required menu 7 [0]9[5] (Select) 2. To go back to Main menu:

1.

[6] (Back) repeatedly until Main menu screen appears Shortcut: To jump to and open one of the 9 application items, simply press the Numeric key corresponding to the required items location. The numbering system is:

1 4 7 2 5 8 3 6 9 25 VS7_AAA.book Page 26 Wednesday, August 3, 2005 5:10 PM Menu Navigation Navigating the applications Current settings When you highlight an item in the menu list, the current setting of the item is displayed in the bar just above the menu list.

<Example>

In the case shown to the right, the current setting of Warning tone is Off.

[192] to scroll to Warning tone 7 [0]

[192] to scroll to Warning tone 7 [5] (Select) Menu selection method There are several ways to select items: by using center Navigation key or Left Soft key, or by entering the required number, e or r given to the item.

<Example>

To select Warning tone in the display shown above:

Press the menu number [G]

Keys corresponding to the menu numbers

[A]-[K]: Menu A-K

[e]: Menu e

[L]: Menu L

[r]: Menu r Note: Direct access keys to the menus with no menu numbers/symbols are not available. 26 VS7_AAA.book Page 27 Wednesday, August 3, 2005 5:10 PM Basic Operations Note: There are several ways to select items from menu lists. See Menu selection method on page 26. Making calls To make a call, your phone must be within the range of a network with adequate signal strength. Standard dialling In standby mode:

1. Enter the area code and phone number 7 [q]9[0]

2. When the other party answers, talk into Microphone 3.

[Y]9[6] (End) to hang up The duration of the call is displayed. Note: To erase a digit: [6] (Clear) To increase the earpiece volume: [1]9[4]9[O]

To decrease the earpiece volume: [2]9[3]9[P]

If Active flip is set to On (see page 103), you can answer a call by opening the phone and end a call by closing the phone. Auto redial Your phone will automatically redial the number up to 10 times under certain conditions, such as no answer, destination number is busy, network busy, or some connection errors. When your call is rejected:

1. 2. To stop Auto redial while redialling, [Y]9[6] (Cancel) Auto redial? 7 [5] (Yes) to start Auto redial 27 VS7_AAA.book Page 28 Wednesday, August 3, 2005 5:10 PM Basic Operations Contacts dialling You can make calls using the numbers in Contacts. d Main menu > Contacts > Contacts list 1.

[192] to scroll to the required contact OR Enter letters to find a contact beginning with the specific letters

[q]

If the card has several phone numbers stored, [192] to scroll to the required number 7 [0]9[5] (Call) 2. 3. Recent call dialling You can make calls using the numbers in Call log. In standby mode:

1. 2.

[q]

[394] to switch to Dialled numbers, Answered calls or Missed calls screen

[192] to scroll to the required number 7 [q]

3. International dialling The international prefix (+) and the destination country/region code should be entered, followed by the area code and phone number. 1. Press and hold [L] until + is displayed 2. Enter the country/region code 3. Enter the area code and phone number 7 [q]

Note: Many countries/regions include an initial 0 in the area code. This should, in most cases, be omitted when dialling international numbers. For further help, contact your service provider. 28 VS7_AAA.book Page 29 Wednesday, August 3, 2005 5:10 PM Basic Operations Emergency call To make an emergency call, your phone must be within the range of a network. When SIM card is inserted:

1. Enter the local emergency number 7 [q]9[0]

Note: Most countries support the international emergency number 112. If you find the number does not work on your phone, contact your service provider. When SIM card is not inserted:

1.

[5] (Options) 7 Select SOS Answering calls When there is an incoming call, the phone rings and/or vibrates

(depending on your phone setting). (See Sounds & alerts on page 99.) When the phone is ringing and/or vibrating:

1.

[q]9[5] (Accept) Note:

If Any key answer is set to On (see page 102), you can answer a call by pressing any key except [Y], [0], [6] (Cancel), [U], [O] and [P]. If Active flip is set to On (see page 103), you can answer a call by opening the phone and end a call by closing the phone. Rejecting calls When the phone is ringing and/or vibrating:

1.

[Y]9[6] (Cancel) 29 VS7_AAA.book Page 30 Wednesday, August 3, 2005 5:10 PM

[0]9[5] (View) Basic Operations Missed call notification If you cannot answer a call, Missed call notification appears on the standby screen. To view the Missed call list:

1. 2. To call back, [192] to scroll to the required log 7 [q]

Alert mute You can turn the ringing tone and/or vibration off before answering a call. When the phone is ringing and/or vibrating:

1. When the phone is closed: [U]9[O]9[P]

When the phone is open: [0]

[q] to answer the call 2. Answering a second call When on an active call, you may receive another call. To enable this service, Call waiting must be active. (See Call waiting on page 102.) If you hear an alert tone during a call:

1.

[q]9[5] (Accept) The first call is placed on hold.

[q] to switch between the two calls if required 2. To reject another call:

1. To end the active call and answer the incoming call:

1. 2.

[Y] to end the active call

[q] to answer the call

[6] (End) 30 VS7_AAA.book Page 31 Wednesday, August 3, 2005 5:10 PM Basic Operations Auto answer When you use the optional Personal Handsfree earpiece, you can answer a call automatically. To enable this service, Auto answer must be on. (See Auto answer on page 103.) Silent mode To use your phone in a quiet situation, you can activate the Silent mode. You can personalise the Silent mode setting. (See Profiles on page 90.) In standby mode:

1. Press and hold [r] to activate/deactivate the Silent mode Voicemail Voicemail is a network service which allows callers, who could not reach you, to leave voice messages. You may need to subscribe to this service through your service provider. For further details, see Voicemail on page 66. Retrieving stored voice messages When a new voice message is stored, an alert sounds and (

appears on the display and you receive an SMS notification. 1. Press and hold [A] to call your voice mailbox

) If the number is not valid, contact your service provider. 2. Follow the recorded instructions 3.

[Y] when finished 31 VS7_AAA.book Page 32 Wednesday, August 3, 2005 5:10 PM Basic Operations In-call operations In-call options (while connected to an active call) When on a call, the following options are available. 1.

[5] (Options) 7 Select the required option Hold call/Resume From contacts Create SMS Inbox (SMS) Calendar Speaker mode/

Handheld mode/

Bluetooth mode Record Put or resume a call on hold. Access the Contacts list. Create a new SMS message. Access Inbox (SMS). Access Calendar. Switch to Speaker, Handheld or Bluetooth talking mode. Record the conversation. The sound clip is saved to My Media. Hold You can put a call on hold. During a call:

1.

[q] to switch between Hold call and Resume OR

[5] (Options) 7 Select Hold call or Resume 32 VS7_AAA.book Page 33 Wednesday, August 3, 2005 5:10 PM Basic Operations

[2]9[3]9[P]

[1]9[4]9[O]

[5] (Options) 7 Select Speaker mode or Handheld mode Handsfree talking You can have a conversation without holding the phone to your ear. Swapping between Speaker and Handheld mode 1. Volume control You can adjust the volume of the phone earpiece, speaker, headset or Bluetooth audio device if attached. To increase the volume:

1. To decrease the volume:

1. DTMF DTMF (Dual Tone Multi Frequency) can be sent during a conversation. These are often used to access voicemail, paging and computerised home banking. For example, you may need to enter a number to remotely access voicemail messages. A phone number may be stored in the Contacts card together with a DTMF sequence, allowing the number to be dialled upon recall and the DTMF sequence to be sent automatically. To send DTMF during a call:

1. Enter digits [L]-[K], [e] or [r]

Pause dial Using pauses allows you to send DTMF automatically. 1. Enter the phone number 2. Press and hold [r] until a p is displayed 3. Enter the DTMF digits after the pause, e.g. enter the number to access voicemail messages

[q]9[0]

When the call is connected, the DTMF sequence is sent after 3 seconds. 33 4. VS7_AAA.book Page 34 Wednesday, August 3, 2005 5:10 PM Basic Operations Making a second call You can make another call while on a call. During a call:

1. Enter the second phone number or select a phone number from the Contacts list To access Contacts list, see In-call operations on page 32.

[q]

The first call is put on hold.

[q] to switch between the two calls if required 2. 3. Multiple calls operations In-call options (while on multiple calls) When on more than one call, the following options are available. 1.

[5] (Options) 7 Select the required option Swap Merge From contacts Create SMS Inbox (SMS) Calendar Speaker mode/

Handheld mode/

Bluetooth mode Record 34 Switch between one active and one held call. Enable multi-party conversation when two calls are connected (one active, one on hold). See Conference on page 35. Access the Contacts list. Create a new SMS message. Access Inbox (SMS). Access Calendar. Switch to Speaker, Handheld or Bluetooth talking mode. Record the conversation. The sound clip is saved to My Media. VS7_AAA.book Page 35 Wednesday, August 3, 2005 5:10 PM Basic Operations Conference You can have a conversation with up to 5 different parties at the same time. During a call (one active call and one call on hold):

1.

[5] (Options) 7 Select Merge The 2 calls are joined into a Conference call.

[Y]

[5] (Options) 7 Select Merge To add new participants:

2. Call the next person or answer an incoming call 3. To end the Conference call:

4. To split the caller from the Conference call and talk privately:

During a Conference call:

1. 2. 3.

[5] (Options) 7 Select Conference call

[192] to scroll to the required caller you wish to talk to

[5] (Options) 7 Select Split The remaining callers can continue with the Conference call. 4. To end the private call and rejoin the Conference call, [5]

(Options) 7 Select Merge 35 VS7_AAA.book Page 36 Wednesday, August 3, 2005 5:10 PM Basic Operations Text entry Input method Your phone provides three text input methods to enter characters. T9 Multi-tap Numeric A predictive text entry system. You can enter a word with fewer key presses. A traditional way to type in a letter. Press a key several times until the required letter appears. You can enter numbers (0-9), e, r and +. An icon on the upper left of the screen shows the current input method and letter case. Letter case Input method T9 Multi-tap Numeric Icon T9y T9u T9 Abc ABC abc 123 Automatic Upper case Lower case Automatic Upper case Lower case

36 VS7_AAA.book Page 37 Wednesday, August 3, 2005 5:10 PM Basic Operations Changing the input method Press and hold [e] to cycle through the input methods as follows. T9 (T9y) 7 Multi-tap (Abc) 7 Numeric (123) Changing the letter case Press [e] repeatedly until the icon for the required letter case mode appears. Auto capital change When the letter case is set to Automatic (T9y and Abc), the first character is entered as upper case and subsequent letters as lower case. When one of the following characters [. (Period) ! ? ] is entered, the next character is entered as upper case. 37 VS7_AAA.book Page 38 Wednesday, August 3, 2005 5:10 PM Basic Operations T9 text input method The T9 text input method enables you to enter text faster and easier. You only need to press a key once for any letter you require on that key. The program searches its built-in dictionary to predict the word that most closely matches your key presses. 1. In text entry screen, press a key once for any letter you require on that key 2. Continue pressing other keys until the end of a word is reached 3. Select the required word OR If the required word is not in the dictionary, ? is displayed after the word.

[5] (Spell) 7 Enter the correct word 7 [0]9[5] (Add) The word is added to the internal dictionary automatically. For example, to enter Hello!, press keys as follows. Key Display

[F]

I

[D]

He

[G]

Gel

[G]

Hell

[A]

[H]

Hello Hello.

[2] x 4 Hello!

My dictionary Words that you enter in My dictionary are added to the internal dictionary so that they are suggested next time. To add words to My dictionary:

1. 2. Enter a word 7 [0]9[5] (Add) In text entry screen, [5] (Options) 7 Select My dictionary 38 VS7_AAA.book Page 39 Wednesday, August 3, 2005 5:10 PM Basic Operations Editing text Inserting/deleting text Move the cursor by pressing [1929394] to the position you want to insert or delete a letter. Press [6] (Clear) to delete a character. Press and hold [6] (Clear) to delete all the characters. Copying/cutting/pasting text 1. 2. 3.

[5] (Options) 7 Select Copy or Cut

[1929394] to move to the text you wish to copy or cut

[0]9[5] (Start) 7 [1929394] to highlight the text 7

[0]9[5] (Stop)

[1929394] to move to a new required location

[5] (Options) 7 Select Paste 4. 5. Options When entering text, the following options may be available by pressing [5] (Options). Use contacts*1 Copy/Cut/Paste Add symbol Input method T9 on/off*1 Input language*1 My dictionary*2 Exit Access Contacts menu to use Contacts data. See Copying/cutting/pasting text on page 39. Show the Symbol list from which you can select any symbol available on your phone. Select the input method. Turn On or Off the predictive dictionary. Select a language you wish to write in. Add words to the internal dictionary. Exit the text edit mode.

*1 Depends on each application.

*2 Not available in Chinese T9 mode. 39 VS7_AAA.book Page 40 Wednesday, August 3, 2005 5:10 PM Basic Operations The following table shows characters available on your phone. The characters vary depending on the Input language setting (see page 39). Input method (Input language: English) T9 (T9y, T9u or T9) Multi-tap (Abc, ABC or abc) Space Key

[L]

Numeric

(123) 0

(Press and hold) +

[A]

. , - ? ! @ : ; / 1

[S]

[D]

[F]

[G]

A B C 2 (a b c 2) D E F 3 (d e f 3) G H I 4 (g h i 4) J K L 5 (j k l 5)

[H] M N O 6 (m n o 6)

[I]

P Q R S 7 (p q r s 7)

. , ? 1 ! " - : ; @ / e ( ) # + _ = [

] { } ' & % \ ^ ~ | < > f $

` (Space) * (Linefeed) A B C 2

(a b c 2 ) D E F 3

(d e f 3 ) G H I 4 (g h i 4 ) J K L 5 (j k l 5 ) M N O 6 g

(m n o 6 h ) P Q R S 7

(p q r s 7 l ) T U V 8 j

(t u v 8 k ) T U V 8 (t u v 8)

[J]

[K] W X Y Z 9 (w x y z 9) W X Y Z 9 (w x y z 9 )

[e]

[r]

Letter case change

(Press and hold) Input method change

. , ? ! " - : ; @ / e ( ) # + _ = [ ] { } ' & % \ ^ ~ | < > f

$ ` (Space) * (Linefeed)

(Press and hold) Linefeed 1 2 3 4 5 6 7 8 9 e r Shortcut: To enter numbers while in T9 or Multi-tap method, press and hold the required numeric key [L]-[K]. 40 VS7_AAA.book Page 41 Wednesday, August 3, 2005 5:10 PM Contacts Contacts menu structure Contacts list ..................... 42 Add contact ...................... 44 Phone..................................... 44 SIM......................................... 46 Call log.............................. 47 Dialled numbers ..................... 47 Answered calls ....................... 47 Missed calls............................ 47 Speed Dial list .................. 48 View groups ..................... 49 Advanced ..........................49 Synchronisation ......................49 My number..............................50 Display by ...............................51 Memory status ........................51 Copy all from SIM ...................51 Copy all to SIM .......................51 Delete all.................................52 Service numbers*1 ...........52

*1 Note: There are several ways to select items from menu lists. See Menu selection method on page 26. 41 VS7_AAA.book Page 42 Wednesday, August 3, 2005 5:10 PM Contacts Viewing the Contacts list You can search for a phone number in the Contacts list. All the numbers stored in the phone and SIM card are displayed. Searching for a contact d Main menu > Contacts > Contacts list 1.

[192] to scroll to the required contact OR Enter letters to find a contact beginning with the specific letters 2. To view the Contacts card, [0]

Options In the Contacts list, the following options are available by pressing

[5] (Options). View Call Create message Edit Search Add contact Delete 42 View the selected Contacts card. Call the selected contact. Create an SMS or MMS, and send it to the selected contact. See Creating a new message on page 54. Edit the selected contact. See Editing a Contacts card on page 46. Search a contact by entering characters. Add a new contact. See Adding contacts on page 44. Delete the selected contact. VS7_AAA.book Page 43 Wednesday, August 3, 2005 5:10 PM Contacts Speed dial Copy to phone/SIM Send via Assign the selected contact to a Speed dial. See Assigning speed dial keys on page 48. Copy the selected contact to the phone or the SIM card. Send the selected contact to another device via infrared or Bluetooth. See Infrared on page 105 or Bluetooth wireless technology on page 107. Making a call from Contacts d Main menu > Contacts > Contacts list 1.

[192] to scroll to the required contact OR Enter letters to find a contact beginning with the specific letters

[q]

If the card has several phone numbers stored, [192] to scroll to the required number 7 [0]9[5] (Call) 2. 3. 43 VS7_AAA.book Page 44 Wednesday, August 3, 2005 5:10 PM Contacts Adding contacts Storing a contact in your phone In the phone, you can store detailed information for each contact. The entries are retained even if you damage your SIM card. d Main menu > Contacts > Add contact > Phone 1. 2. Enter information 7 [0]

[192] to scroll to the required field 7 [0]

To enter characters, see Text entry on page 36. 3. When entries are completed, [5] (Save) First name*1 Enter the first name. Last name*1 Mobile number*1 Home number*1 Work number*1 Mobile email*1 Personal email*1 Work email*1 Enter the last name. Enter the phone numbers. Enter the e-mail addresses. Birthday Enter the contacts birthday. Postal address Enter Additional info, No./street, Postal code, City, State and Country. Note Enter notes. 44 VS7_AAA.book Page 45 Wednesday, August 3, 2005 5:10 PM Contacts Ringtone Message alert Illuminations Picture Group Select the required ringtone from

<Default> or My Media. To download a ringtone, select Download*2. Select the required Message alert from

<Default> or My Media. To download a Message alert, select Download*2. Select <Default> or the required illumination colour. Select the required picture. Select the required group.

*1 The contact entry can be saved when at least one of the items is filled.

*2 Note:

If a picture in My Media is attached to a Contacts card, it appears on the screen when the contact calls you. When the picture is set to be attached to a Contacts card, the phone saves the picture resized for the Contacts card if the picture is larger than the display size. For downloading contents, visit http://box.panasonic.com/

45 VS7_AAA.book Page 46 Wednesday, August 3, 2005 5:10 PM Contacts Storing a contact in your SIM card You can store some information for each contact in your SIM card. d Main menu > Contacts > Add contact > SIM 1. 2. Enter information 7 [0]

[192] to scroll to the required field 7 [0]

Name Enter the name. Tel number Enter the phone number. 3.

[5] (Save) Note: The length of name and number, and the total amount of data are SIM dependent. Storing a contact from Call log See Saving a phone number from Call log on page 47. Editing a Contacts card d Main menu > Contacts > Contacts list 1. Highlight the required Contacts card (See Searching for a contact on page 42.)

[5] (Options) 7 Select Edit 2. 3. Edit the required entry 7 [5] (Save) 46 VS7_AAA.book Page 47 Wednesday, August 3, 2005 5:10 PM Contacts Call log Recently dialled phone numbers, answered calls and missed calls are stored in Call log. The numbers in the Call log list can be used to call, send a message or add to Contacts. Viewing/Dialling from Call log d Main menu > Contacts > Call log 1.

[394] to move to Dialled numbers, Answered calls or Missed calls

[192] to scroll to the required log 7 [0]

[0] to call 2. 3. Shortcut: You can directly view the Dialled numbers list by pressing [q]

in standby mode. Saving a phone number from Call log d Main menu > Contacts > Call log 1.

[394] to move to Dialled numbers, Answered calls or Missed calls

[192] to scroll to the required phone number

[5] (Options) 7 Select Add to contacts 2. 3. 4. Select New or Add 5. If New is selected: Enter other information If Add is selected: Highlight the required contact 7 [5]

(Select) 7 If there is no empty field, Would you like to replace? 7 [0]9[5] (Yes) 7 Select the number you want to replace in Phone Contacts

[5] (Save) 6. 47 VS7_AAA.book Page 48 Wednesday, August 3, 2005 5:10 PM Contacts Options In each Call log list, the following options are available by pressing

[5] (Options). Call Create message Add to contacts Delete Delete all Call the selected number. Create an SMS or MMS message to the selected number. Store the selected number to Contacts. See Saving a phone number from Call log on page 47. Delete the selected number. Delete all the logs in the list. Speed dial You can quickly dial phone numbers by pressing keys 2-9. Assigning speed dial keys d Main menu > Contacts > Speed Dial list 1. 2. Enter phone number 7 [0]

To assign a speed dial key to a contact:

d Main menu > Contacts > Speed Dial list 1. 2. Highlight the required contact 7 [5] (Select) 3.

[192] to scroll to the required key 7 [5] (LookUp)

[192] to scroll to the required key 7 [0]

If the card has several phone numbers stored, [192] to scroll to the required number 7 [0]9[5] (Select) Using the speed dial keys In standby mode:

1. Press and hold a speed dial key ([S]-[K]) 7 [5] (Call) 48 VS7_AAA.book Page 49 Wednesday, August 3, 2005 5:10 PM Contacts Groups You can categorise the Contacts list stored in your phone into 20 groups. Viewing group members d Main menu > Contacts > View groups 1. Select the required group The contacts in the selected group are displayed. Renaming a group d Main menu > Contacts > View groups 1. 2. Enter a new group name 7 [0]

[192] to scroll to the required group 7 [5] (Rename) Advanced Synchronisation You can synchronise your Contacts list with your network server. You can just send changes or send all your records to the network server. For further details, see Synchronisation on page 112. To send only changes to the network server:

d Main menu > Contacts > Advanced > Synchronisation >

Modified contacts The phone confirms completion. To send all your records to the network server:

d Main menu > Contacts > Advanced > Synchronisation > All contacts The phone confirms completion. 49 VS7_AAA.book Page 50 Wednesday, August 3, 2005 5:10 PM profile page 44 profile Contacts My number You can store your own numbers in the phone and SIM card. Storing numbers in Mobile profile d Main menu > Contacts > Advanced > My number > Mobile

[0]9[5] (Create) 1. 2. Repeat steps 1-3 in Storing a contact in your phone on Storing numbers in SIM profile d Main menu > Contacts > Advanced > My number > SIM 1. When the profile is empty: [0]9[5] (Create) When the profile has the stored number(s): [5] (Options) 7 Select Create 2. Repeat steps 1-3 in Storing a contact in your SIM card on page 46 Options When viewing My number, the following options are available by pressing [5] (Options). Edit Create*1 Delete Send via Edit the profile. Create a new profile. Delete the profile. Send the profile via infrared or Bluetooth. See Infrared on page 105 or Bluetooth wireless technology on page 107.

*1 Available only for SIM profile. 50

VS7_AAA.book Page 51 Wednesday, August 3, 2005 5:10 PM Contacts Displaying the Contacts list sorted by last name/first name You can choose to sort the Contacts list by contacts last name or first name. d Main menu > Contacts > Advanced > Display by 1. Select First name or Last name Memory status You can see the amount of memory available in the Contacts list. d Main menu > Contacts > Advanced > Memory status Note: The amount of memory for SIM storage depends on your SIM card. To decrease the amount of phone memory used, delete unwanted data or store data on your PC (see CD-ROM on page 152). Copying contacts You can copy all the contacts from SIM card to phone, or from phone to SIM card. Copying all the contacts from SIM card to phone d Main menu > Contacts > Advanced > Copy all from SIM 1. Copying all the contacts from phone to SIM card d Main menu > Contacts > Advanced > Copy all to SIM 1. Only Name and Number fields can be copied. Continue?

7 [0]9[5] (Yes) Copy? 7 [0]9[5] (Yes) 51 VS7_AAA.book Page 52 Wednesday, August 3, 2005 5:10 PM Contacts Deleting Phone Contacts You can delete all the contacts stored in your phone. d Main menu > Contacts > Advanced > Delete all Delete all contacts in phone? 7 [5] (Yes) 1. 2. Are you Sure? 7 [5] (Yes) Service numbers If your SIM card includes SDN (Service Dialling Number), you can call a service number by selecting from the list. SDN enables you to access special services provided by your network operator, such as customer support, emergency services, etc. d Main menu > Contacts > Service numbers 1.

[192] to scroll to the required item 7 [0]9[5] (Call) 52 VS7_AAA.book Page 53 Wednesday, August 3, 2005 5:10 PM Messages Messages menu structure Create new........................ 54 SMS message........................ 55 MMS message ....................... 58 Voicemail...........................66 Call Voicemail .........................66 Set mailbox number................66 Inbox ................................. 60 SMS ....................................... 61 MMS....................................... 62 Messages settings ...........67 SMS........................................67 MMS .......................................68 Archive.............................. 64 SMS ....................................... 64 MMS....................................... 64 Memory status ..................69 SMS........................................69 MMS .......................................69 Web mail*1........................ 65 Chat*1................................ 66

*1 Note: There are several ways to select items from menu lists. See Menu selection method on page 26. 53 VS7_AAA.book Page 54 Wednesday, August 3, 2005 5:10 PM Messages Creating a new message Messaging types SMS MMS Short Message Service allows you to send and receive short text messages on any network that has roaming agreement. (Dependent on the recipients phone parameters.) With the Illumination feature, you can express special feelings in a message. Multimedia Messaging Service allows you to send messages containing text, pictures, sound and video clips from your phone to other MMS-enabled phones or e-mail addresses. The recipient can play it as a slide show. Note: The message centre number for SMS should be preprogrammed on the SIM card. Changing this number (see Message centre setting on page 67) may cause failure of a text message. Your phone may have already been set with an MMS profile when purchased. To change the settings of the profile, see Advanced setting on page 68. Sending or editing of a forward locked picture/sound clip/video clip indicated by the icon (

) is restricted. 54 VS7_AAA.book Page 55 Wednesday, August 3, 2005 5:10 PM Messages Creating an SMS message d Main menu > Messages > Create new > SMS message 1. Create text message 7 [0]

See Text entry on page 36 for entering text. 2. To enter recipients phone number directly: Enter number To select recipients phone number from Contacts: [0] 7 Highlight the required contact 7 [5] (Select) 7 If the card has several phone numbers stored, [192] to scroll to the required number 7 [0]9[5] (Select)

[0] to send the message 3. Creating an Illumination message with emoticons With the Illumination feature, you can express special feelings in a message. The Indicator/Illumination Light responds to the pictographs in an Illumination message and light in combinations of colours and light patterns when you receive and view an Illumination message. d Main menu > Messages > Create new > SMS message 1. Create text message 2. 3. Select Illumination templates 4. Select the required emoticon See Emoticon list on page 56.

[5] (Options) 7 Select Templates To preview the Illumination of the messages you create:

[5] (Options) 7 Select Preview illumination Note: Only recipients who have an Illumination message capable phone can view messages with Illumination. 55 VS7_AAA.book Page 56 Wednesday, August 3, 2005 5:10 PM Messages Emoticon list Emoticon Indicator Colour Light Pattern Emoticon Indicator Colour Light Pattern

:-D

:e 0:-)

:-P

:-S

8-)

:-0

:-I I-(

;-) A B A C B A B C A B C Colour 3 Colour 6 Colour 1 Colour 5 Colour 2 Colour 4 Colour 7 A

\^o^/

\(>o<)/

^3^

(o^-^o)

(e~o~e)

(T_T)

(^w^)

(eoe) p(^-^)p

(_ _)Zzz

Colour 3 Colour 6 Colour 1 Colour 5 Colour 2 Colour 4 Colour 7 A B A B A B C A B A C A Colour 8 Colour 8 Pattern A: [Firefly] flickers slowly for about 4 seconds. Pattern B: [Flash] flickers fast for about 3 seconds. Pattern C: [Beam] lights for about 3 seconds. 56 VS7_AAA.book Page 57 Wednesday, August 3, 2005 5:10 PM Options When creating a text message, the following options are available by pressing [5] (Options). Messages Send Send to many Preview illumination Templates Count message Save Use contacts Copy/Cut/Paste Add symbol Input method T9 on/off Input language My dictionary Exit Send the text as an SMS message. Send the text to more than one recipients. Preview illumination message. Select Illumination templates to create an illumination message or User templates to use the stored text templates. The long message may be divided into several messages. You can check the concatenated message number. Save the message in Unsent folder. Access Contacts menu to use Contacts data. Copy, cut or paste the text. Show the Symbol list from which you can select any symbol available on your phone. Select the input method. Turn On or Off the predictive dictionary. Select a language you wish to write in. Add words to the internal dictionary. Exit the text edit mode. 57 VS7_AAA.book Page 58 Wednesday, August 3, 2005 5:10 PM Messages Creating an MMS message d Main menu > Messages > Create new > MMS message 1. Select Add picture, Add text, Add sound or Add video 2. If Add text is selected: Create text message 7 [0]

See Text entry on page 36 for entering text. If Add picture/Add sound/Add video is selected: Select the required item stored to My Media 7 [5] (Select) You can also download new files, take new pictures, record new sound or video clips for the MMS message. 3. To add more than one picture, text, sound or video clip, [192]

to scroll to Slides 7 [0] 7 [0]9[5] (Yes)

[192] to scroll to Add recipient 7 [0]

[5] (Options) 7 Select Send

[192] to scroll to Add subject 7 [0]

4. Repeat steps 1-3 if required To send the message:

5. 6. 7. Enter subject 7 [0]

8. 9. Select From contacts, Enter number or Enter email address 10. If From contacts is selected: Highlight the required contact 7

[5] (Select) 7 If the card has several numbers stored, [192]

to scroll to the required number 7 [0]9[5] (Select) If Enter number/Enter email address is selected: Enter number/email address 7 [0]

11. [192] to scroll to Send 7 [0]

Note: When you select Add video and record a new video clip in step 2, the recording time is fixed to For MMS sending. You cannot attach a video clip together with a picture file or sound clip to one slide. For downloading contents, visit http://box.panasonic.com/

58 VS7_AAA.book Page 59 Wednesday, August 3, 2005 5:10 PM Messages Slide options When Slides is highlighted, the following options are available by pressing [5] (Options). Add new Send Slide duration Remove slide Preview slide Add a new slide. Send the MMS message after entering subject and recipient number or address. Specify duration of the slide. Remove the slide from the MMS message. Preview the MMS message as a slide. Receiving messages Receiving SMS messages When you receive a new SMS message, the message icon (

) is displayed along with a tone, illumination, and/or vibration. The SMS notification also appears on the standby screen. When One push SMS setting is set to On (see page 67), new SMS messages can be displayed by opening the flip. You can also check received SMS messages on the Front display. Reading SMS messages When an SMS notification is displayed on the standby screen:

1.

[0]9[5] (View) If there is more than one notification, [192] to scroll to New SMS before step 1. If there is one SMS message, the message is automatically displayed. If there is more than one SMS message, [192] to scroll to the required message header in SMS Inbox 7 [0]

2. 3. When the message is displayed, [0] to show the message details (senders number, date, message centres number) if required 59 VS7_AAA.book Page 60 Wednesday, August 3, 2005 5:10 PM Messages Receiving MMS messages When you receive a new MMS message, the message icon (

displayed along with a tone, illumination, and/or vibration. The received MMS messages are stored in Inbox. Reading MMS messages To read the received MMS messages, see MMS Inbox on page 62.

) is If you do not want to receive MMS messages automatically, select Note:

Never in Auto download setting (see page 68). In this case, you will receive a message notification first, and then you will need to receive messages manually. Inbox Inbox stores received SMS and MMS messages. d Main menu > Messages > Inbox Numbers in brackets show the number of unread messages and the total number of messages in each inbox. 60 VS7_AAA.book Page 61 Wednesday, August 3, 2005 5:10 PM SMS Inbox SMS message icons Messages Unread message Read message Reading SMS messages d Main menu > Messages > Inbox > SMS 1. 2.

[192] to scroll to the required message header 7 [0]

[0] to show the message details (senders number, date, message centres number) if required Options When viewing the list of messages or the selected message, the following options are available by pressing [5] (Options). Reply Forward Call Add to contacts Use detail*1 Delete Delete all*2 View illumination*1 Create reply message in SMS or MMS. Forward the selected message. Call the senders number. Store the senders number to Contacts. Use phone number, e-mail or web address in the selected message to call, create message, add to Contacts, etc. Delete the selected message. Delete all the SMS messages. Check the illumination of the message.

*1 Available only when viewing the selected message.

*2 Available only when viewing the list of messages. 61 VS7_AAA.book Page 62 Wednesday, August 3, 2005 5:10 PM Messages MMS Inbox MMS message icons Unread message Read message MMS notification

[192] to scroll to the required message header 7 [0]

Reading MMS messages d Main menu > Messages > Inbox > MMS 1. Options in the message list When viewing the list of messages, the following options are available by pressing [5] (Options). Reply Reply to all Forward Call Add to contacts Delete Delete all Protect/Unprotect Details Create reply message by SMS or MMS. Create reply message to all recipients. Forward the selected message. Call the senders number. Store the senders number or e-mail address to Contacts. Delete the selected message. Delete all the MMS messages and notifications. Protect or unprotect the selected message. Show details for the selected message. Note: Sending or editing of a forward locked file indicated by the icon (

is restricted.

) 62 VS7_AAA.book Page 63 Wednesday, August 3, 2005 5:10 PM Messages Options while viewing messages When viewing the message, the following options are available by pressing [5] (Options). Reply Reply to all Play again Message font size*1 Save picture Save sound Save video Use detail Attached files Create a reply message by SMS or MMS. Create a reply message to all the recipients. Play the selected message. Select the required font size. Save the attached picture to My Media. Save the attached sound clip to My Media. Save the attached video clip to My Media. Use the phone number, e-mail or web address in the selected message to call, create message, add to Contacts, etc. Show the attached files.

*1 Options for notification When the notification is highlighted, the following options are available by pressing [5] (Options). Receive Forward Reject Call Delete all Protect/Unprotect Details Receive new messages. Forward the message. Delete the notification from the message list and the message from the server. Call the senders number. Delete all the MMS messages and notifications. Protect or unprotect the message. Show details for the selected message. 63 VS7_AAA.book Page 64 Wednesday, August 3, 2005 5:10 PM Messages Archive Archive stores SMS and MMS messages that are sent or waiting to be sent. SMS MMS Sent Unsent Sent Outbox Drafts Store sent SMS messages. Store undelivered and unfinished SMS messages. Store sent MMS messages. Store undelivered MMS messages. Store unfinished MMS messages. Viewing messages d Main menu > Messages > Archive > SMS or MMS 1. Select the required folder 2. Options for SMS In Sent and Unsent folders, the following options are available by pressing [5] (Options).

[192] to scroll to the required message 7 [0]

Send Call Use detail*1 Delete Delete all*2 View illumination*1 Send the selected message. Call the senders number. Use phone number, e-mail or web address in the selected message to call, create message, add to Contacts, etc. Delete the selected message. Delete all the SMS messages in the folder. Check the illumination of the message.

*1 Available only when viewing the selected message.

*2 Available only when viewing the list of messages. 64 VS7_AAA.book Page 65 Wednesday, August 3, 2005 5:10 PM Messages Options for MMS In Sent, Outbox and Drafts folders, the following options are available by pressing [5] (Options). Edit Forward*1 Send*2 Delete Delete all Protect/Unprotect Details Edit the selected message. Forward the selected message. Send the selected message. Delete the selected message. Delete all the messages in the folder. Protect or unprotect the selected message. Show details for the selected message.

*1 Available only in Sent folder.

*2 Available only in Outbox and Drafts folder. Web mail Web mail is an innovative service that lets you stay up-to-date with all of your messages. You need to subscribe to this service. For further information, contact your service provider. Connecting to internet mail d Main menu > Messages > Web mail Your phone is connected to the Internet via a WAP connection to retrieve e-mail messages. 1. Follow the screen contents 65 VS7_AAA.book Page 66 Wednesday, August 3, 2005 5:10 PM Messages Chat Chat lets you enjoy the fun of instant messaging wherever you are. Its the fun way to chat on-line. For further information, contact your service provider. d Main menu > Messages > Chat 1. Follow the screen contents Voicemail Voicemail is a network service which allows callers, who could not reach you, to leave voice messages. You may need to subscribe to this service. For further information, contact your service provider. Retrieving stored voice messages When a new voice message is stored, an alert sounds and (

appears on the display, and you receive an SMS notification. When an SMS notification is displayed on standby screen:

1. 2. Follow the recorded instructions OR d Main menu > Messages > Voicemail > Call Voicemail 1. Follow the recorded instructions

[0]9[5] (Call)

) Shortcut: You can also press and hold [A] in standby mode to call your voice mailbox. Changing the voice mailbox number d Main menu > Messages > Voicemail > Set mailbox number 1. Enter new voice mailbox number 7 [0]9[5] (Ok) 66 VS7_AAA.book Page 67 Wednesday, August 3, 2005 5:10 PM Messages Messages settings SMS settings d Main menu > Messages > Messages settings > SMS 1. Select the required setting Message lights Message lights view Message centre Message type Validity period Delivery report Store sent SMS Message font size*1 Bearer type One push SMS

*1 Decide whether or not you want the Indicator/

Illumination Light to illuminate when receiving an illumination message. Decide whether or not you want the Indicator/

Illumination Light to illuminate when viewing an illumination message. Edit the message centre number. Select the required message type. Set a time period for the message centre to attempt message delivery. Select 1 hour, 12 hours, 1 day, 1 week, 1 month, 3 months or Maximum. Select On to receive delivery reports. Select On to store sent messages to the Sent folder. Select the required font size. Select the data bearer type. Select On to display new SMS messages by opening the flip. 67 VS7_AAA.book Page 68 Wednesday, August 3, 2005 5:10 PM Messages MMS settings d Main menu > Messages > Messages settings > MMS 1. Select the required setting Reports Priority Validity period Auto download Player mode Message font size*1 Advanced Select Request read (check if the other party has read the message), Send read (inform the other party that you have read the message when asked), Request delivery (check if the other party has received the message) or Send delivery

(inform the other party that you have received the message when asked). Select Low, Normal or High for the message priority level. Set a time period for the message centre to attempt message delivery. Select 1 day, 7 days or Maximum. Select Always on (messages are retrieved automatically after receiving message notifications), On when home (messages are retrieved automatically in your service area) or Never (messages are retrieved manually). Select Auto (display MMS slides, or playback video/sound clips automatically) or Manual

(display MMS slides, or playback video/sound clips manually). Select the required font size. If required, edit the information on Message server, WAP profiles, Fetch on server*1 and Anonymous reject*1. Select Information to view MMS software information.

*1 68 VS7_AAA.book Page 69 Wednesday, August 3, 2005 5:10 PM Messages Memory status You can see the amount of memory available for storing messages. d Main menu > Messages > Memory status > SMS or MMS Note: To decrease the amount of phone memory used, delete unwanted data or store data on your PC (see CD-ROM on page 152). 69 VS7_AAA.book Page 70 Wednesday, August 3, 2005 5:10 PM Camera Camera menu structure Picture............................... 71 Video................................. 77 Note: There are several ways to select items from menu lists. See Menu selection method on page 26. 70 VS7_AAA.book Page 71 Wednesday, August 3, 2005 5:10 PM Camera Picture You can take a picture with the built-in camera, and send them via MMS, Infrared or Bluetooth, or use them as wallpaper. You can also attach a picture to a contact stored in your phone. Picture preview screen Icons on picture preview screen

Zoom level (1-25) Picture size (Ultra large/Extra large/Large/

Medium/Small/Main display/Front display) Image quality (Super fine/Fine/Normal) Multi shot mode Self timer (5 or 10 seconds delay) Night mode Photo light

Brightness level (-2, -1, 0, +1, +2) 71 VS7_AAA.book Page 72 Wednesday, August 3, 2005 5:10 PM Camera Taking a picture d Main menu > Camera > Picture 1. The display acts as a viewfinder. Move the phone around to frame your subject

[0]9[U] to capture the image 2. Operations after taking a picture To save the image to My Media: [5] (Save)9[U]

You can save the image by pressing [U] whether the flip is open or closed. To return to the preview screen without storing the image: [6]

(Delete) To send the captured image via MMS: [0] 7 See Creating an MMS message on page 58 Taking a self-portrait You can take your self-portrait using Front display. d Main menu > Camera > Picture 1. Close the flip. Look at yourself in Front display 2. 3. The image appears on both the Main display and the Front display. For further operation, see Operations after taking a picture on page 72

[U] on the side of the phone Shortcut: To directly open the picture preview screen, press and hold [U]

in standby mode. Caution: To avoid impairing camera performance, DO NOT leave the phone with the camera facing direct sunlight. 72 VS7_AAA.book Page 73 Wednesday, August 3, 2005 5:10 PM Camera Note: To send a picture via infrared or Bluetooth, or use as wallpaper, save the image once, and then go to My Media. (See Pictures on page 132.) If the camera is left in certain conditions including the preview screen and capture screen for 3 minutes, the phone automatically exits Picture mode. If left in the preview screen, but with the options menu displayed, the phone remains in this state. If certain situations such as receiving calls occur during camera operation, the phone exits Camera mode. If a captured image is on the screen, it is saved to My Media. Zoom

[1]9[O] to zoom in one level

[2]9[P] to zoom out one level You can also press and hold the keys to quickly reach the required zoom level. Note: Zoom function may not be available when the picture size is set to Ultra large 1600x1200. Adjusting the brightness level The picture brightness indicator shows the current brightness level.

[4] to increase the brightness level

[3] to decrease the brightness level Taking close-up pictures You can take sharp pictures from a close distance by using Macro Mode. (Macro focus range: 10 cm) Slide the Macro Mode Switch to (

) before taking close-up pictures. 73 VS7_AAA.book Page 74 Wednesday, August 3, 2005 5:10 PM Camera Viewing pictures Pictures taken with the built-in camera are saved to My Media. To view the saved pictures, see Viewing pictures on page 132. Picture settings In the preview screen, the following options are available by pressing [5] (Options). Select the required size from Ultra large 1600x1200, Extra large 1280x960, Large 640x480, Medium 320x240, Small 160x120, Main display 240x320 or Front display 96x64. Select the required quality from Super fine, Fine or Normal. Select On to light up your subject before snapping a picture. Select On to take a picture in low light conditions. 15 continuous shots is available. See Continuous shooting on page 76. Select the required colour from Normal, Sepia, Monochrome or Negative. Select the amount of time delay you require for shooting from Off, 5 seconds or 10 seconds. Select the required sound from Pattern 1-5. Switch from Picture mode to Video mode. Show the number of files which can be saved in the current picture size and image quality. You can see the number of files which can be saved in other image qualities by pressing [5] (Quality), and in other picture sizes by pressing [192]. Reset the current picture settings to default. Show direct key operation in the preview screen. Picture size Image quality Photo light Night mode Multi shot mode Effect Self timer Shutter sound Switch to video Available space Set to default Help 74 VS7_AAA.book Page 75 Wednesday, August 3, 2005 5:10 PM Camera Direct key operation You can change the picture settings by pressing one of the numeric keys which correspond to the functions as follows. Some functions are depicted by the icon. See Icons on picture preview screen on page 71.

[A]: Switch to video

[S]: Picture size

[D]: Image quality

[F]: Multi shot mode

[G]: Self timer

[H]: Night mode

[I]: Effect

[L]: Help

[r]: Photo light Adding a picture to Contacts card If a picture is attached to a Contact card, it appears on the screen when the contact calls you. To attach a picture to a contact, save the image once, and then go to Contacts. See Adding contacts on page 44. 75 VS7_AAA.book Page 76 Wednesday, August 3, 2005 5:10 PM Camera Continuous shooting In Multi shot mode, you can capture a succession of 15 images with just one press. When you set Multi shot mode on, the picture size is fixed to Medium 320x240 and Night mode off. d Main menu > Camera > Picture 1. 2. Select On 3.

[5] (Options) 7 Select Multi shot mode

[0]9[U] to shoot The captured images are displayed as thumbnails. Note: You cannot take pictures in Multi shot mode when the phone is closed. Once you close the phone, Multi shot mode is switched off. To view the captured images:

[1929394] to scroll to the required thumbnail 7 [0]

You can view the next image by pressing [4] or [2], and the previous image by pressing [3] or [1]. To save a captured image:

1. When the required thumbnail is highlighted or the required image is displayed on the screen, [5] (Options) 7 Select Save this one only The picture is stored to My Media. To save all the captured images:

1. In thumbnail screen or when one of the images is displayed on the screen, [5] (Options) 7 Select Save all pictures OR When one of the images is displayed on the screen, [0]

All the pictures are stored to My Media. Note: All the captured images are also saved by pressing [U] on thumbnail screen or when one of the images is displayed on the screen. 76 VS7_AAA.book Page 77 Wednesday, August 3, 2005 5:10 PM Camera Video You can record video clips with the built-in camera, and send them via MMS, infrared or Bluetooth. Video preview screen Icons on video preview screen

Zoom level (1-25) Recording time

(Extended video/For MMS sending) Self timer (5 or 10 seconds delay) Photo light Brightness level (-2, -1, 0, +1, +2) 77 VS7_AAA.book Page 78 Wednesday, August 3, 2005 5:10 PM Camera Recording a video clip d Main menu > Camera > Video 1. Main display acts as a viewfinder. Move the phone around to frame your subject

[0]9[U] to start recording 2. 3. Video recorder records until reaching the clip size limit or until you press [0]9[U]9[5] (Stop) 4. Select the required action Playback Save to My Media Send as MMS Playback the recorded video clip. Save the recorded video clip to My Media. Attach the recorded video clip to an MMS message. See Creating an MMS message on page 58. Caution: To avoid impairing camera performance, DO NOT leave the phone with the camera facing direct sunlight. Note: To send a video clip via infrared or Bluetooth, save the video clip once, and then go to My Media. (See Videos on page 139.) If the video is left in the preview screen or a recorded video clip is displayed for 3 minutes, the phone automatically exits Video mode. If left in preview screen, but with the options menu displayed, the phone remains in this state. If certain situations such as receiving calls occur during camera operation, the phone exits Camera mode. The recording ends automatically, and the already recorded video clip is saved to My Media. 78 VS7_AAA.book Page 79 Wednesday, August 3, 2005 5:10 PM Camera Zoom

[1]9[O] to zoom in one level

[2]9[P] to zoom out one level You can also press and hold the keys to quickly reach the required zoom level. Note: You cannot change the zoom level while recording. Adjusting the brightness level The video clip brightness indicator shows the current brightness level.

[4] to increase the brightness level

[3] to decrease the brightness level Note: You cannot change the brightness level while recording. Playing video clips Recorded video clips are saved to My Media. To play the saved video clips, see Playing video clips on page 139. 79 VS7_AAA.book Page 80 Wednesday, August 3, 2005 5:10 PM Camera Video settings In the preview screen, the following options are available by pressing [5] (Options). Recording time Photo light Effect Self timer Switch to picture Available space Help Select the video recording time from Extended video or For MMS sending. Select On to light up your subject before recording a video clip. Select the required colour from Normal, Sepia, Monochrome or Negative. Select the amount of time delay you require for recording from Off, 5 seconds or 10 seconds. Switch from Video mode to Picture mode. Show the number of files which can be saved in the current recording time. You can see the number of files which can be saved in other recording time by pressing [5] (RecTime). Show direct key operation in the preview screen. Direct key operation You can change the video settings by pressing one of the numeric keys which correspond to the functions as follows. Some functions are depicted by the icon. See Icons on video preview screen on page 77.

[A]: Switch to picture

[S]: Recording time

[G]: Self timer

[I]: Effect

[L]: Help

[r]: Photo light 80 VS7_AAA.book Page 81 Wednesday, August 3, 2005 5:10 PM Browser Browser menu structure PANASONIC BOX Note: There are several ways to select items from menu lists. See Menu selection method on page 26. Setting up your Browser Your phones WAP (Wireless Application Protocol) browser allows you to access services supported by the network such as news, weather reports, sports, etc. Before Internet services can be accessed, you need to subscribe to your service provider to enable the relevant configuration information. (Your service provider may have already completed the connection settings. To configure the WAP profile settings, see WAP profiles on page 87.) Note: Modifying the preinstalled settings without accurate knowledge may cause a failure in connection. 81 VS7_AAA.book Page 82 Wednesday, August 3, 2005 5:10 PM Browser Viewing the contents Opening Browser d Main menu > Browser The off-line menu is displayed. You will not be connected until you choose a menu. 1.

[192] to scroll to the required menu 7

[0]

The phone is connected to the web site. Shortcut: You can directly access Browser by pressing [6] (

standby mode.

) in Online status icons Non-secure CSD connection Secure CSD connection Non-secure GPRS connection Secure GPRS connection Closing Browser 1.

[5] (Options) 7 Select Exit browser 82 VS7_AAA.book Page 83 Wednesday, August 3, 2005 5:10 PM Browser Browser options While Browser is on-line or off-line, the following options are available. d Main menu > Browser [Off-line]

OR d Main menu > Browser > Required menu [On-line]

1.

[5] (Options) 7 Select the required option Select Bookmarks Enter address Save media*1*2 Set as bookmark*1 Service Inbox Reload page*1 Advanced Settings Exit browser*1 Select the required item. Go to the bookmark list. Go to URL entry. The image in contents is saved to My Media. The displayed URL is saved to the bookmark list. Open Service Inbox. Reload this page. Go to homepage, clear the cache, view or send the current URL, or view the current WAP information. Edit WAP profiles/Push access settings or view the security information. Terminate the browser.

*1 Available only when the web page is displayed.

*2 Available only when the web page has the image, melody or video contents. 83 VS7_AAA.book Page 84 Wednesday, August 3, 2005 5:10 PM Browser Bookmarks Once you bookmark your favourite page or a frequently accessed page, you can jump to the page quickly. You can also categorise the bookmarked pages into 10 folders and rename each folder. While off-line or on-line:

1. 2. 3. 4. To load the URL: [0]

[5] (Options) 7 Select Bookmarks

[192] to scroll to the required bookmark folder 7 [0]

[192] to scroll to the required bookmark To select the required option: [5] (Options) Go to page Add bookmark Edit Move to Delete Send bookmark Delete all in folder Jump to the web page. Add to the bookmark list. Edit the selected bookmark name and URL. Move the selected bookmark to another folder. Delete the selected bookmark. Send the bookmarked URL via SMS or MMS. Delete all the bookmarks in the folder. Renaming a bookmark folder

[192] to scroll to the required bookmark folder 7 [5] (Options) 7 Select Rename 7 Enter a new folder name 7 [0]

Deleting all bookmarks In the bookmark list:

[5] (Options) 7 Select Delete all 7 [5] (Yes) All the saved bookmarks are deleted, and the folder names return to the default. 84 VS7_AAA.book Page 85 Wednesday, August 3, 2005 5:10 PM Browser

[5] (Options) 7 Select Enter address Enter address You can directly go to the required web page by entering the URL. While off-line or on-line:

1. 2. Enter URL 7 [0]

Save media Images, melodies or videos on the web page can be saved to My Media. When the web page is displayed:

1. 2.

[5] (Options) 7 Select Save media

[0]9[5] (Select) to save Note: Panasonic is not responsible for the performance of downloaded contents or possible corruption of phone software. Set as bookmark You can save the URLs of your favourite pages in Bookmarks. When the web page is displayed:

1. 2. Enter title 7 [0]

3.

[192] to scroll to the required folder 7 [0]9[5] (Save)

[5] (Options) 7 Select Set as bookmark 85 VS7_AAA.book Page 86 Wednesday, August 3, 2005 5:10 PM Browser Service Inbox View WAP Push message and go to URL. While off-line or on-line:

1. 2. To load the URL: [0]

[5] (Options) 7 Select Service Inbox To select the required option: [5] (Options) Go to page View message*1 Delete Jump to the web page. View the message. Delete the message.

*1 Available only when text and URL are delivered from your service provider. Reload page Current page can be reloaded. When the web page is displayed:

1.

[5] (Options) 7 Select Reload page 86 VS7_AAA.book Page 87 Wednesday, August 3, 2005 5:10 PM Browser Advanced While off-line or on-line:

1. 2. Select the required option

[5] (Options) 7 Select Advanced Home Clear cache View current URL*1 Send current URL*1 WAP information Jump to the set-up homepage. Delete the contents stored in the cache. View the URL of the current page. Send the URL of the current page via SMS or MMS. View WAP browser information.

*1 Available only when the web page is displayed. Settings WAP profiles If no settings are present, contact your service provider. You can check or edit the current WAP profile settings, or add new WAP profile settings. d Main menu > Browser [Off-line]

1. 2. Select WAP profiles 3. 4. 5.

[192] to scroll to the required profile

[5] (Options) 7 Select Activate, Edit or Delete If Edit is selected, you can edit the following information:

Profile name, Homepage, Proxy IP, Proxy port, Use proxy and Data connections

[5] (Options) 7 Select Settings Note: You need to configure GPRS or CSD before configuring the WAP profile settings. See Data connections on page 116. 87 VS7_AAA.book Page 88 Wednesday, August 3, 2005 5:10 PM Browser Push access Set up Push access to receive WAP messages. While off-line or on-line:

1. 2. Select Push access 3. Select Service indication, Service loading or Other

[5] (Options) 7 Select Settings messages 4. Select On or Off Security View security information. While off-line or on-line:

1. 2. Select Security 3. Select the required item

[5] (Options) 7 Select Settings Certificates Current certificate*1 Session info*1 Select Certificate 1-20. View the current certificate. View session information.

*1 Available only while secure connection. 88 VS7_AAA.book Page 89 Wednesday, August 3, 2005 5:10 PM Settings Settings menu structure Phone settings................. 90 Profiles ................................... 90 Language ............................... 91 Time and date ........................ 91 Illuminations ........................... 92 Key settings............................ 93 Master reset ........................... 95 Display settings ............... 96 Main display ........................... 96 Front display........................... 97 Main menu icons .................... 98 Themes .................................. 99 Backlight time......................... 99 Sounds & alerts ............... 99 Assign ringtone ...................... 99 Incoming volume .................. 100 Message alert......................... 99 Message volume .................. 100 Warning tone ........................ 100 Startup tone.......................... 100 Shutdown tone ..................... 100 Vibration alert ....................... 100 Calls.................................101 Call diverts............................101 Call waiting ...........................102 Any key answer ....................102 Active flip ..............................103 Auto answer..........................103 Send my number ..................103 Call duration .........................103 Service charge*1*2................104 Connectivity....................105 Infrared .................................105 Bluetooth ..............................107 Synchronisation*2 ................. 112 Cell Broadcast ...................... 114 GSM network........................ 115 Data connections.................. 116 Security ...........................117 PIN entry............................... 117 Change PIN2 ........................ 118 Fixed dial .............................. 118 Call barring ........................... 118

*1

*2 Note: There are several ways to select items from menu lists. See Menu selection method on page 26. 89 VS7_AAA.book Page 90 Wednesday, August 3, 2005 5:10 PM Settings Phone settings Profiles You can switch among different profiles in your phone, each with a distinct combination of alert method, ringtone, etc. Profiles are set up for use in the following environments:

Normal Silent Meeting Outdoor Car For everyday settings. For formal occasions. For meetings. For noisy environments. For driving occasions. Activating a profile d Main menu > Settings > Phone settings > Profiles 1. 2.

[192] to scroll to the required profile

[0]

OR

[5] (Options) 7 Select Activate Setting a profile You can personalise the individual settings within a profile. For further details about the individual settings, see Sounds & alerts on page 99. d Main menu > Settings > Phone settings > Profiles 1. 2. 3. Select the required item 4. Select the required setting

[192] to scroll to the required profile

[5] (Options) 7 Select Edit 90 VS7_AAA.book Page 91 Wednesday, August 3, 2005 5:10 PM Settings Language You can change the language used for display messages and/or text entry. Automatic uses the language dictated by the country/region code of the SIM card. d Main menu > Settings > Phone settings > Language >

Display language or Input language 1. Select Automatic or the required language Time and date You can set your Home clock and Away clock. Home clock You can set the current time and date on your phone. d Main menu > Settings > Phone settings > Time and date >

Home clock 1. Select the required setting Set date & time Home area Summer time Enter the time 7 [2] 7 Enter the date Select your home area. Select On to activate the summer time mode. Away clock You can set Away clock to display the time in the area you choose. d Main menu > Settings > Phone settings > Time and date >

Away clock 1. Select the required setting Set time zone Summer time Select the required area. Select On to activate the summer time mode. 91 VS7_AAA.book Page 92 Wednesday, August 3, 2005 5:10 PM Settings Choosing clock You can choose either Home clock or Away clock to be displayed on your phone. d Main menu > Settings > Phone settings > Time and date >

Select clock > Home clock or Away clock Display format You can select the required display format for the date and time. d Main menu > Settings > Phone settings > Time and date >

Display format > Time or Date 1. To set Time format: Select 24 hour or 12 hour To set Date format: Select the required format (DD=date, MM=month, YY=year) Illuminations The Indicator/Illumination Light flashes or beams when you receive calls/messages, have a conversation, the flip is closed, the battery is charging or data is transferred. d Main menu > Settings > Phone settings > Illuminations 1. Select the required event Incoming Message In conversation Flip close Charging Data transfer Select the required colour or Off. Select On or Off. Note: You can check the Flip close illumination by pressing [O9P] while the phone is in standby mode with the flip closed. 92 VS7_AAA.book Page 93 Wednesday, August 3, 2005 5:10 PM Settings Key settings Key tone You can change the key tone. d Main menu > Settings > Phone settings > Key settings > Key tone volume 1. Select the required tone Key volume You can change the key tone volume. d Main menu > Settings > Phone settings > Key settings > Key 1.

[1929394] to scroll to the required volume 7 [0]9[5]

(Select) Key backlight If you set the key backlight to off, you can maintain longer battery life. d Main menu > Settings > Phone settings > Key settings > Key backlight 1. Select On or Off 93 VS7_AAA.book Page 94 Wednesday, August 3, 2005 5:10 PM Settings Keyguard Keyguard prevents any keys from being accidentally pressed e.g. when the phone is being carried. When Keyguard is enabled, the Keyguard icon (

received, Keyguard is temporarily disabled and you can answer the call. To enable Keyguard:

d Main menu > Settings > Phone settings > Key settings >

) appears on the display. When a call is Would you like to lock keypad? 7 [0]9[5] (Yes) Keyguard 1. OR In standby mode:

1. Press and hold [0]

2. Would you like to lock keypad? 7 [0]9[5] (Yes) Note: Emergency calls can still be made with the Keyguard enabled but there is no indication that you are dialling the number.

) appears on the display:

[0] 7 Would you like to unlock? 7 [0]9[5] (Yes) To disable Keyguard:

When (

1. Shortcut keys Navigation key [1929394] can be used as a Shortcut key. It is possible to assign a specific menu to Navigation key so that you can access the menu directly from standby mode. d Main menu > Settings > Phone settings > Key settings >

1. Select Navigation up, Navigation right, Navigation down or Shortcut keys Navigation left 2. Select the required menu 94 VS7_AAA.book Page 95 Wednesday, August 3, 2005 5:10 PM Settings Master reset You can reset your phone to the factory settings, except for the settings for Language, Time and date, and Calendar. User data such as contacts, messages, call logs and data stored in My Media remains on the phone. Password is required for master reset. The factory set password is 0000. Resetting d Main menu > Settings > Phone settings > Master reset >

Reset settings 1. Would you like to reset all phone settings? 7 [0]9[5]

(Yes) 2. Enter the password 7 [0]9[5] (Ok) Changing the password d Main menu > Settings > Phone settings > Master reset >

Password setting 1. Enter the current password 7 [0]9[5] (Ok) 2. Enter a new password 7 [0]9[5] (Ok) 3. Enter the new password again 7 [0]9[5] (Ok) 95 VS7_AAA.book Page 96 Wednesday, August 3, 2005 5:10 PM Settings Display settings Main display You can change the wallpaper, brightness and position of the operator name on the Main display. Wallpaper You can change the wallpaper on the standby screen. d Main menu > Settings > Display settings > Main display >

Wallpaper 1. Select My Media or Download*1 2. 3. To set: [5] (Select)

[1929394] to scroll to the required wallpaper To view and set: [0] 7 [0]9[5] (Select) Brightness You can adjust the brightness of the display. d Main menu > Settings > Display settings > Main display >

Brightness

[192] to adjust the brightness level 7 [0]9[5] (Select) 1. Operator name You can change the position of your operator name on the standby screen. d Main menu > Settings > Display settings > Main display >

Operator name 1. Select Default, Upper left or Lower left

*1 96 VS7_AAA.book Page 97 Wednesday, August 3, 2005 5:10 PM Settings Front display You can change the wallpaper, contrast and clock display on the Front display. External wallpaper You can change the wallpaper on the Front display. d Main menu > Settings > Display settings > Front display >

1. Follow the procedures of Wallpaper in Main display on page External wallpaper 96. Contrast You can adjust the contrast of the Front display. d Main menu > Settings > Display settings > Front display >

Contrast

[192] to adjust the contrast 7 [0]9[5] (Select) 1. Clock display You can change the clock display style. d Main menu > Settings > Display settings > Front display >

Clock display 1. Select Clock and Date or Digital 97 VS7_AAA.book Page 98 Wednesday, August 3, 2005 5:10 PM Settings Main menu icons You can change menu icons or the background on Main menu screen. Changing icons To change menu icons:

d Main menu > Settings > Display settings > Main menu icons 1. 2. Select My Media or Download*1 3. 4. To set: [5] (Select)

[1929394] to scroll to the required menu icon 7 [0]

[1929394] to scroll to the required image To view and set: [0] 7 [0]9[5] (Select) To change the background:

d Main menu > Settings > Display settings > Main menu icons 1. 2. Repeat steps 2-4 in To change menu icons: on page 98

[5] (Options) 7 Select Attach full image

*1 Note: For downloading contents, visit http://box.panasonic.com/

Setting back to default d Main menu > Settings > Display settings > Main menu icons 1. 2.

[5] (Options) 7 Select Set to default Would you like to set default? 7 [0]9[5] (Yes) 98 VS7_AAA.book Page 99 Wednesday, August 3, 2005 5:10 PM Settings Themes You can change the colour theme of the display. d Main menu > Settings > Display settings > Themes 1. Select the required colour theme Backlight time You can set the length of time the display is illuminated by the backlight. d Main menu > Settings > Display settings > Backlight time 1. Select 10 seconds, 30 seconds or 60 seconds Sounds & alerts Ringtone/Message alert You can change the tone and/or the volume of the ringtone for incoming calls and the Message alert for incoming messages. Changing the ringtone/Message alert d Main menu > Settings > Sounds & alerts > Assign ringtone or Message alert 1. Select My Media or Download*1 2. 3.

[192] to scroll to the required tone

[0] to listen to the tone 7 [6] (Cancel) to stop the tone and return to the previous screen

[5] (Select) 4.

*1 Note: For downloading contents, visit http://box.panasonic.com/

99 VS7_AAA.book Page 100 Wednesday, August 3, 2005 5:10 PM Settings Changing the ringtone/Message alert volume d Main menu > Settings > Sounds & alerts > Incoming volume or Message volume 1.

[1929394] to adjust the volume (Volume 0-4, Step tone) 7

[0]9[5] (Select) Warning tone The Warning tone informs you of low battery. d Main menu > Settings > Sounds & alerts > Warning tone 1. Select On or Off Startup tone/Shutdown tone The Startup tone sounds after switching on the phone, while the Shutdown tone sounds after switching off the phone. d Main menu > Settings > Sounds & alerts > Startup tone or Shutdown tone 1. Select On or Off Vibration alert The phone does not ring but vibrates to inform you of incoming calls and messages if you switch on vibration alert. d Main menu > Settings > Sounds & alerts > Vibration alert 1. Select On or Off 100 VS7_AAA.book Page 101 Wednesday, August 3, 2005 5:10 PM Calls Settings Call diverts Voice, fax and data calls can be diverted to different numbers in different situations. For example, you can divert calls to your voice mailbox when you are out of reach. Voice calls can be diverted in the following situations:

All calls When busy When no reply When unreachable Divert all incoming voice calls. Divert incoming voice calls when a call is in progress. Divert incoming voice calls if call is not answered. Divert incoming voice calls when phone is not in a coverage area. d Main menu > Settings > Calls > Call diverts 1. Select Divert voice, Divert all fax or Divert all data

(If Divert all fax or Divert all data is selected, go to step 3.) 2. Select the divert situation 3. Select Direct input or From contacts 4. If Direct input is selected: Enter the phone number to divert to 7 [0]

If From contacts is selected: Highlight the required contact 7

[5] (Select) 7 If the card has several phone numbers stored,

[192] to scroll to the required number 7 [0]9[5] (Select) When the setting is enabled, the divert icon (

) is displayed on the standby screen. 101 VS7_AAA.book Page 102 Wednesday, August 3, 2005 5:10 PM Settings To cancel each setting/check each status:

d Main menu > Settings > Calls > Call diverts 1. Select Divert voice 7 [192] to scroll to the required divert situation OR

[192] to scroll to Divert all fax or Divert all data

[5] (Options) 7 Select Off or Status 2. To cancel all the settings/check all the statuses:

d Main menu > Settings > Calls > Call diverts 1. Select Cancel all or Status all

[0]

Call waiting If Call waiting is switched on, another call can be received while on a call and multiple calls can be made. d Main menu > Settings > Calls > Call waiting The current status is displayed. To accept the current status:

1. To change the setting:

1.

[5] (Options) 7 Select Activate or Deactivate The current status is displayed.

[0] to accept the current status 2. Any key answer Calls can be answered by pressing any key except [Y], [0], [6]

(Cancel), [U], [O] and [P]. When Any key answer is off, calls can only be answered by pressing

[q] or [5] (Accept). d Main menu > Settings > Calls > Any key answer 1. Select On or Off 102 VS7_AAA.book Page 103 Wednesday, August 3, 2005 5:10 PM Settings Active flip You can answer a call by opening the phone and end a call by closing the phone. When Active flip is off, you need to press the appropriate key to answer or end the call. When you are using a headset, you can continue your conversation even while the phone is closed. d Main menu > Settings > Calls > Active flip 1. Select On or Off Auto answer When you use the optional Personal Handsfree earpiece, you can answer a call automatically. d Main menu > Settings > Calls > Auto answer 1. Select On or Off Send my number You can choose whether or not to show your name and/or number to another phone. You can comply with your networks own setting if you select Network set. d Main menu > Settings > Calls > Send my number 1. Select Network set, On or Off Call duration You can check the duration of incoming or outgoing calls. d Main menu > Settings > Calls > Call duration 1. Select Incoming or Outgoing 2. To reset the counter, [0]9[5] (Reset) 3. Reset? 7 [0]9[5] (Yes) 103 VS7_AAA.book Page 104 Wednesday, August 3, 2005 5:10 PM Settings Service charge Cost left You can check the remaining call units available if Max cost is set. d Main menu > Settings > Calls > Service charge > Cost left Call meter You can check the total costs of calls made. d Main menu > Settings > Calls > Service charge > Call meter To reset the counter:

1. 2. Enter the PIN2 code 7 [0]9[5] (Ok) Price/unit You can set your personal rate of the cost that the service provider charges for one unit of call time. d Main menu > Settings > Calls > Service charge > Price/unit 1. 2. Enter the currency 7 [0]

3. Enter the value 7 [0]9[5] (Ok)

[0]9[5] (Reset) 7 Reset total cost? 7 [0]9[5] (Yes)

[0]9[5] (Edit) 7 Enter the PIN2 code 7 [0]9[5] (Ok) To enter a decimal point: [r]

Max cost You can set the maximum cost of calls allowed. d Main menu > Settings > Calls > Service charge > Max cost 1. 2. Enter the credit limit 7 [0]9[5] (Ok) To disable the Max cost:

In step 1, [5] (Options) 7 Select Disable 7 [0]9[5] (Yes) 7 Enter the PIN 2 code 7 [0]9[5] (Ok)

[0] 7 Enter the PIN2 code 7 [0]9[5] (Ok) 104 VS7_AAA.book Page 105 Wednesday, August 3, 2005 5:10 PM Settings Connectivity Infrared You can transfer data between your phone and other infrared enabled devices using an infrared wavelength connection. You can send Contacts card, calendar events, and pictures/sound clips/video clips stored in My Media. Note: Some downloaded files may be protected under copyright laws. These files should not be sent. Preparing for infrared connection Place your phone and the other device within the effective range of 20 cm. Verify there are no obstructions between the two devices. Nearby activated infrared devices may cause interference. Ensure that the infrared ports of the devices point at each other. Infrared Port On the receiving device, activate the Infrared port. If the other device is a computer, you need to set up infrared connection on the computer. (Example: For Windows XP, Start >

Control Panel > Printers and Other Hardware > Wireless Link >

Infrared tab > All others to send files to your computer using infrared communications) Caution: Though invisible to the eye, do not point the infrared beam at anyones eyes. 105 VS7_AAA.book Page 106 Thursday, August 4, 2005 11:55 AM Settings Sending data via infrared Prepare for infrared connection as described in Preparing for infrared connection on page 105. 1. Select the item you wish to send 2.

[5] (Options) 7 Select Send via 3. Select Infrared The phone automatically begins infrared connection. A confirmation message is displayed when complete. Receiving data via infrared Prepare for infrared connection as described in Preparing for infrared connection on page 105. To activate infrared:

You need to activate the infrared function before receiving data. When infrared is set to on, the infrared icon (

) appears on the display. If infrared is unused for 10 minutes or the phone is once switched off, it is automatically set to off and (

d Main menu > Settings > Connectivity > Infrared 1. Select On To receive data via infrared:

When (

1. When transfer is started, Would you like to receive data? 7

) is displayed, sender can begin transfer of data.

) disappears.

[0]9[5] (Yes) to receive the data 2. When transfer is complete, Data received 7 Return to standby screen 7 Received file name is displayed 7 [0]9[5]

(Save) to save the data The received data is stored in respective menus or files. 106 VS7_AAA.book Page 107 Wednesday, August 3, 2005 5:10 PM Settings Bluetooth wireless technology You can send and receive pictures, video and sound clips, etc. between Bluetooth devices such as mobile phones and computers. Use a Bluetooth headset or handsfree to talk wirelessly on your phone whilst the phone is in your pocket or purse. Note: Although Bluetooth devices can connect within a 10 metre range, walls or other nearby barriers may cause interference. Check with local authorities before using Bluetooth wireless technology as some countries may restrict the use of Bluetooth devices. Keeping Bluetooth setting On consumes battery power more rapidly. To conserve battery power, select Off in Bluetooth setting when not in use

(see page 107). Setting up Bluetooth You must first set up Bluetooth connections before using it for the first time. Thereafter, go to Settings to switch Bluetooth setting on and change your phones visibility to other Bluetooth devices. d Main menu > Settings > Connectivity > Bluetooth > Settings 1. Select the required setting Bluetooth on/off Phone name Visibility*1 Select On or Off. Use the default name or enter a name for your phone that other devices will see when they search for your phone. Choose Show phone to allow other Bluetooth devices to find your phone when searching, or select Hide phone to keep other Bluetooth devices from finding it during a search.

*1 To conserve battery life and avoid unwanted connections, Show phone in Visibility is of 5 minutes duration. 107 VS7_AAA.book Page 108 Wednesday, August 3, 2005 5:10 PM Settings Pairing with other devices Before you can transfer information between two Bluetooth devices, they need to find each other and set up a connection. This is referred to as pairing. Ensure that the device in which you want to pair is switched on, and its Bluetooth setting is activated. If the other device is a computer, you need to set up Bluetooth connection on the computer. (Example: For Windows XP, Start >

Control Panel > Printers and Other Hardware > Wireless Link >

Bluetooth tab > All others to send files to your computer using Bluetooth communications) d Main menu > Settings > Connectivity > Bluetooth > Paired devices 1. No paired device add new device? 7 [5] (Ok) The phone begins searching for devices and notifies you when it finds the other device

[192] to scroll to the required device

[5] (Options) 7 Select Pair device 2. 3. 4. Enter the Pass key, if requested 7 [5] (Ok) You may need to enter Pass keys on the both sides of connecting devices Make device trusted? 7 [5] (Yes) 5. Note: The Pass key may be between 1 and 16 digits except where stated in the connecting device (normally headset) instructions when a 4 digit Pass key is specified. Making the device trusted on step 5 can cause future connections to occur without notice. This may enable trusted devices to access your Contacts list and data folders without prompting. You are advised to trust only your own devices to avoid being prompted each time a call is received. 108 VS7_AAA.book Page 109 Wednesday, August 3, 2005 5:10 PM Settings Setting up the Bluetooth headset The Bluetooth headset gives you wireless, handsfree operation. Before you can use the headset you need to pair the headset and the phone. After switching on Bluetooth on the phone the Bluetooth icon (

appears on the screen. You now need to set up the headset. 1. Switch on the headset

) See the headset instructions. 2. Make the headset discoverable 3. On the phone, follow the instructions Pairing with other See the headset instructions. devices on page 108 4. To receive calls on a Bluetooth headset: Highlight the device

) appears on the screen when the headset is connected. name 7 [5] (Options) 7 Select Connect OR Press the button on the headset

See the headset instructions. Once the headset and phone are connected, you can answer calls using the headset. If the headset is on when you receive a call, the headset rings. For information on how to answer a call with the headset, see the headset instructions. To make a call with the headset, also see the headset instructions. 109 VS7_AAA.book Page 110 Wednesday, August 3, 2005 5:10 PM Settings Sending/receiving data via Bluetooth You can send and receive Contacts cards as business cards, Calendar events, pictures, video and sound clips via Bluetooth. Note: The phone may not allow you to copy, modify, transfer or forward some copyrighted images, ringtones or other contents. To send data via Bluetooth:

1. Ensure that the receiving device is made visible 2. Highlight the item you wish to send 3.

[5] (Options) 7 Select Send via 4. Select Bluetooth If the phone has already searched for devices, it shows the list of discovered devices. If the phone has not yet searched, the phone automatically searches for Bluetooth devices nearby, and displays the list of discovered devices.

[6] (Cancel) to stop search.

[192] to scroll to the intended device in the list 7 [5]

(Options) 5. 6. Select Select Connecting message appears, then when other device accepts, a confirmation message displays when transfer is complete. If the other device cannot receive data, an error message appears. To receive data via Bluetooth:

1. Ensure that your phones Bluetooth is on and made visible 2. When transfer starts, Would you like to receive data? 7

[0]9[5] (Yes) to receive the data 3. When transfer is complete, Data received 7 [0]9[5] (Save) to save the data The received data is stored in respective menus or files. Note: Confirmation is required first if the paired device is not set as authorised. 110

VS7_AAA.book Page 111 Wednesday, August 3, 2005 5:10 PM Settings Managing paired devices d Main menu > Settings > Connectivity > Bluetooth > Paired devices

[192] to scroll to the required device 7 [5] (Options) 1. 2. Select the required option Add new device View the list of discovered devices. To search for other devices, press [5] (Options) 7 select Search while viewing the Discovered devices list. Make the required device a trusted/untrusted device. Make trust/ Make untrust Connect/ Disconnect Connect/disconnect to the phone, headset or Rename Delete handsfree. Change name of paired device to an easily recognised name. Delete the paired device from your list. Icons of paired devices audio computer phone miscellaneous 111 VS7_AAA.book Page 112 Wednesday, August 3, 2005 5:10 PM Settings Synchronisation You can synchronise your Contacts list with your network server. You may need to do this if you store your Contacts list on the network server, and you want them all to be the same. You can just send changes or send all your records to the network server. This function uses SyncML/OMA Standard technology. Before you can synchronise your Contacts list, you need to set up a server profile and select a WAP profile. Creating/editing a server profile You can create up to 2 server profiles. d Main menu > Settings > Connectivity > Synchronisation 1. 2. 3. 4. Select the required setting 7 [0]

5. Enter information 7 [0]

6.

[5] (Options) 7 Select Sync. settings

[192] to scroll to the required profile

[5] (Options) 7 Select Edit

[5] (Save) Profile name Server name Server database Server user ID Server password Enter the profile name. Enter the web address of the server. Enter the database name of the server. Enter your user name for the server. Enter the password. Selecting a server profile d Main menu > Settings > Connectivity > Synchronisation 1. Repeat steps 1 and 2 in Creating/editing a server profile on page 112

[5] (Options) 7 Select Set 2. 112 VS7_AAA.book Page 113 Wednesday, August 3, 2005 5:10 PM Settings

[5] (Options) 7 Select WAP profiles Selecting a WAP profile d Main menu > Settings > Connectivity > Synchronisation 1. 2. Select the required profile Synchronising To send only changes to the network server:

d Main menu > Settings > Connectivity > Synchronisation >

Modified contacts The phone confirms completion. To send all your records to the network server:

d Main menu > Settings > Connectivity > Synchronisation > All contacts The phone confirms completion. If you are synchronising your Contacts list for the first time, or you Note:

need to make a large number of changes, then the synchronisation may take several minutes or more. You cannot synchronise the following fields: Birthday, Postal address, Ringtone, Message alert, Illumination, Picture and Group. There may be other fields that cannot be synchronised depending on the server. Server or database authentication While synchronising, you may be asked for server or database authentication. Enter the correct information and retry the synchronisation connection. In authentication screen:

1. 2. Enter the correct information 7 [0]

3. To retry the synchronisation connection, [5] (Options) 7

[192] to scroll to the required setting 7 [0]

Select Ok 113 VS7_AAA.book Page 114 Wednesday, August 3, 2005 5:10 PM Settings Cell Broadcast You can receive messages on specified topics, such as weather information and traffic news, regularly from your service provider. You can specify the topic(s) of information and the language in which you wish to receive the information. Activating Cell Broadcast d Main menu > Settings > Connectivity > Cell Broadcast > On/

Off 1. Select On or Off Reading a received message d Main menu > Settings > Connectivity > Cell Broadcast >

Read messages

[192] to scroll to the required message 7 [0]

1. Topics and languages You can add, edit and delete topics and languages. d Main menu > Settings > Connectivity > Cell Broadcast >

Options > Topic or Language

[192] to scroll to the required topic or language

[5] (Options) 7 Select Add, Edit or Delete 1. 2. 114 VS7_AAA.book Page 115 Wednesday, August 3, 2005 5:10 PM Settings GSM network Selecting a network manually You can manually select a network that is available in your current location. d Main menu > Settings > Connectivity > GSM network > New search 1. Select the required network Network list The network list is used when the Search mode is set to Automatic. The order in the list indicates the search priority. You can edit the list as required. d Main menu > Settings > Connectivity > GSM network > Select network 1. 2.

[192] to scroll to the required network

[5] (Options) 7 Select Add, Insert, Edit or Delete Add stores a new network at the end of the list, while Insert stores a new network above the selected network. Search mode You can set your phone to automatically or manually search for the other networks when roaming. When Automatic is selected, the phone automatically selects a new network in order to maintain optimum network availability. When Manual is selected, available networks are shown on the standby screen. d Main menu > Settings > Connectivity > GSM network >

Search mode 1. Select Automatic or Manual Note: National regulations may not permit roaming in your home region. 115 VS7_AAA.book Page 116 Wednesday, August 3, 2005 5:10 PM Settings Data connections GPRS settings and CSD settings are stored in the Data connections menu. Data can be sent/received using GPRS or CSD technology. Editing GPRS/CSD settings d Main menu > Settings > Connectivity > Data connections 1.

[192] to scroll to the required setting you want to edit or

<Empty> to add new setting 7 [0]

If <Empty> is selected, select GPRS or CSD 2. 3. Edit the required field 7 [5] (Save) Deleting GPRS/CSD settings d Main menu > Settings > Connectivity > Data connections 1. 2. 3.

[192] to scroll to the required setting you want to delete

[5] (Options) 7 Select Delete

[0]9[5] (Yes) If your service provider has protected some of your settings, you may Note:

not be able to modify them. USB You can backup data stored on your phone to a PC using USB Cable. Install the Handset Manager software from the CD-ROM before using USB Cable. (See CD-ROM on page 152.) 116 VS7_AAA.book Page 117 Wednesday, August 3, 2005 5:10 PM Settings Security PIN code The PIN protects your SIM card against unauthorised use. If you enable the PIN, you will be prompted to enter the PIN code every time the phone is switched on. The PIN2 controls security for certain service provider services such as Fixed dial and Service charge. If PIN is entered incorrectly 3 times the phone will be locked, and you Note:

will need to enter the PUK code. If PIN2 is entered incorrectly 3 times SIM card will be locked, and you will need to enter PUK2 code. If the PUK code is entered incorrectly 10 times, the phone will cease to operate permanently. All information stored in the SIM card will be lost and the SIM card will need to be replaced. Contact your service provider for further information. Enabling/Disabling PIN entry d Main menu > Settings > Security > PIN entry > Enable/disable 1. Select Enable or Disable 2. Enter the PIN code (4-8 digits) 7 [0]9[5] (Ok) Changing PIN You can change the PIN when PIN entry is set to Enable. d Main menu > Settings > Security > PIN entry > Change PIN 1. Enter the current code 7 [0]9[5] (Ok) 2. Enter the new code 7 [0]9[5] (Ok) 3. Enter the new code again 7 [0]9[5] (Ok) 117 VS7_AAA.book Page 118 Wednesday, August 3, 2005 5:10 PM Settings Changing PIN2 d Main menu > Settings > Security > Change PIN2 1. Enter the current code 7 [0]9[5] (Ok) 2. Enter the new code 7 [0]9[5] (Ok) 3. Enter the new code again 7 [0]9[5] (Ok) Fixed dial When Fixed dial is enabled, only the phone numbers stored in SIM Contacts can be dialled. Any manually dialled phone numbers must match the phone numbers in SIM Contacts. To store, edit or delete phone numbers in SIM Contacts, you need to enter your PIN2 code. d Main menu > Settings > Security > Fixed dial 1. Select Enable or Disable 2. Enter the PIN2 code (4-8 digits) 7 [0]9[5] (Ok) Call barring Call barring restricts certain calls, using a password supplied by your service provider. The following Call bar settings are available:

Bar outgoing calls Bar foreign calls Bar foreign calls except Home Bar incoming calls Bar incoming if abroad All outgoing calls are barred. International outgoing calls are barred. International outgoing calls except to your home country are barred. All incoming calls are barred. Roaming is barred if abroad. 118 VS7_AAA.book Page 119 Wednesday, August 3, 2005 5:10 PM Settings

[192] to scroll to the required setting

[5] (Options) 7 Select Off or Status If Off is selected, enter the password 7 [0]9[5] (Ok) Call barring setting d Main menu > Settings > Security > Call barring 1. Select the required setting 2. Enter the password 7 [0]9[5] (Ok) To cancel setting/check status:

d Main menu > Settings > Security > Call barring 1. 2. 3. To cancel all the settings/check all the statuses:

d Main menu > Settings > Security > Call barring 1. Select Cancel all or Status all 2. Changing the password d Main menu > Settings > Security > Call barring > Password 1. Enter the current password 7 [0]9[5] (Ok) 2. Enter a new password 7 [0]9[5] (Ok) 3. Enter the new password again 7 [0]9[5] (Ok) If Cancel all is selected, enter the password 7 [0]9[5] (Ok) 119 VS7_AAA.book Page 120 Wednesday, August 3, 2005 5:10 PM Tools Tools menu structure SIM Tool Kit*1 ................. 121 Alarms............................. 121 Sound recorder.............. 123 Calculator ....................... 124

*1 Note: There are several ways to select items from menu lists. See Menu selection method on page 26. 120 VS7_AAA.book Page 121 Wednesday, August 3, 2005 5:10 PM Tools SIM Tool Kit The SIM Tool Kit allows the applications existing on the SIM card to interact and operate with your phone. These applications, stored in the SIM memory, are Value Added Services. Your service provider can configure your SIM card with the applications that can be seen on your phone as additional menu items. For further information, contact your service provider. Alarms You can set up to 5 different alarms. Setting the alarm d Main menu > Tools > Alarms 1.

[192] to scroll to the required setting 7

[0]

[192] to scroll to the required field 7

[0]

2. 3. Enter information 7 [0]

4.

[5] (Save) to store the entry The alarm icon (

screen.

) appears on the standby Turn on/off Select On or Off. Time Enter the time. Repeat type Alarm tone Select Once, Everyday or Weekly for alarm repeat type. Select alarm tone from <Default> or My Media. To download an alarm tone, select Download*1. 121 VS7_AAA.book Page 122 Wednesday, August 3, 2005 5:10 PM Tools Alarm volume Stored pictures Illumination Adjust alarm volume (Volume 0-4 or Step tone). Select the required picture. The picture appears on the screen when the alarm sounds. Select the required illumination pattern or Off.

*1

[192] to scroll to the required setting

[5] (Options) 7 Select Turn on or Turn off Note: The alarm sounds at the time you set even if the phone is off. Turning the alarm on/off d Main menu > Tools > Alarms 1. 2. Stopping the alarm When the alarm sounds, you can activate the snooze function to repeat the alarm 5 times at 5 minute intervals. 1. Press any key except [Y] 7 Stop snooze?

2. To stop the snooze function: [0]9[5] (Turn off) To activate the snooze function: [6] (Snooze) Shortcut: Stopping the alarm by pressing [Y] activates the snooze function and returns to standby mode. 122 VS7_AAA.book Page 123 Wednesday, August 3, 2005 5:10 PM Tools Sound recorder You can record sounds, your voice or phone conversation. The recorded sound clips (except for the phone conversation) can be attached to MMS messages. Recording new sound clips d Main menu > Tools > Sound recorder 1. 2. 3. 4.

[0]9[5] (Start) to start recording The max. recording time is 3 minutes.

[0]9[5] (Stop) to stop recording

[0] to play back if required

[192] to adjust the volume

[5] (Options) 7 Select Save The sound clip is saved to My Media. If you select Send as MMS, you can access MMS menu. Note: When you save the recorded sound clip and receive storage full message, press [0]9[5] (Yes) to save the recorded sound clip by deleting unwanted files in My Media. 123 VS7_AAA.book Page 124 Wednesday, August 3, 2005 5:10 PM Tools Calculator You can use the 4-function calculator (addition, subtraction, multiplication and division) to make simple arithmetic operations. d Main menu > Tools > Calculator 1. Enter a number To enter a decimal point: [5]

To enter a negative sign: [r]

To erase digits: [6] (Clear)

[1929394] to select the arithmetic operation ([1] to multiply, [4] to add, [2]

to divide, [3] to subtract) 2. 3. Enter a number 4.

[0] (=) to calculate 124 VS7_AAA.book Page 125 Wednesday, August 3, 2005 5:10 PM Calendar Note: There are several ways to select items from menu lists. See Menu selection method on page 26. Browsing Calendar You can view the calendar by month, by week or by day. Browsing operation d Main menu > Calendar To move around the calendar: [1929394]

To change the view format (Monthly view/Weekly view): see View format in Options To view the details of the selected day (Daily view): [0]

Options From Monthly view or Weekly view, the following options are available by pressing [5] (Options). New entry View format Go to date Send via See Creating Calendar events on page 127. Change calendar view format, Monthly or Weekly. Go to specified date. Send calendar events via infrared or Bluetooth. See Infrared on page 105 or Bluetooth wireless technology on page 107. See Deleting multiple events on page 129. Check Chinese Lunar calendar dates and festivals when viewing the western calendar. Show used memory for calendar. See Calendar settings on page 130. Delete Lunar calendar detail*1 Memory status Settings

*1 Available only when Display language setting is set to Chinese language. (See Language on page 91.) 125 VS7_AAA.book Page 126 Wednesday, August 3, 2005 5:10 PM Calendar Calendar view To change the calendar view format, see Browsing operation on page 125. Monthly view Current date Selected date Week number of selected date Scheduled note Weekly view Current date Current week number Selected date Scheduled note Red frame Coloured - Also displayed in the upper left of the calendar Displayed in the upper right of the calendar Coloured - Also displayed in the schedule list with category icon, start time and note (up to 3 events) Red line under week Displayed in the upper right of the calendar The day of the week is coloured

- Also displayed in the upper left of the calendar The scheduled time zone is coloured Schedule list 126 VS7_AAA.book Page 127 Wednesday, August 3, 2005 5:10 PM Calendar Daily view Current date Current week number Scheduled note Displayed in the upper left Displayed in the upper right Displayed with category icon, start time and note Creating Calendar events d Main menu > Calendar 1. Select the day of the event you wish to store 2. 3.

[5] (Options) 7 Select New entry

[192] to scroll to the required field 7

[0]

4. Enter information 7 [0]

To enter characters, see Text entry on page 36.

[5] (Save) to store the event 5. Note Enter note (subject). Start date/time End date/time Enter the start time 7 [2] 7 Enter the start date (Present time/date is already entered.) Enter the end time 7 [2] 7 Enter the end date (Present time/date is already entered.) 127 VS7_AAA.book Page 128 Wednesday, August 3, 2005 5:10 PM Calendar Repeat type Select an event repeat cycle. Reminder Set the reminder to sound at the start time

(0 min.) or certain minutes ahead of the start time. Select Off, 0 min., or 5, 10, 15, 30, 60, 90 min. ahead. When the reminder tone sounds, press [5]

(View) to check the schedule or press [6]

(Stop) to return to standby mode. Location Category Enter location. Select category. Calendar tone Calendar volume Illumination Select a reminder tone from <Default> or My Media. To download a tone, select Download*1. Adjust the reminder volume (Volume 0-4 or Step tone). Select a reminder illumination pattern or Off.

*1 Note: The reminder sounds at the scheduled time even if the phone is off. The calendar highlights only the start days of scheduled events if the events are scheduled for over days. For downloading contents, visit http://box.panasonic.com/

128 VS7_AAA.book Page 129 Wednesday, August 3, 2005 5:10 PM Calendar

[5] (Options) 7 Select Edit Managing Calendar events Editing events d Main menu > Calendar 1. From Daily view, [192] to scroll to the required event 2. 3. Edit the required field 7 [5] (Save) to overwrite Deleting events Deleting an event d Main menu > Calendar 1. From Daily view, [192] to scroll to the required event 2. 3. Deleting multiple events To delete the events of the selected day or the past events:

d Main menu > Calendar 1. From Monthly view or Weekly view, [1929394] to scroll to

[5] (Options) 7 Select Delete

[0]9[5] (Yes) the required date

[5] (Options) 7 Select Delete 2. 3. Select Day or Past 4.

[0]9[5] (Yes) To delete all events:

d Main menu > Calendar 1. From Monthly view or Weekly view, [5] (Options) 7 Select Delete 2. Select All 3.

[5] (Yes) 129 VS7_AAA.book Page 130 Thursday, August 4, 2005 9:45 AM Calendar

[5] (Options) 7 Select Settings Calendar settings Selecting the starting day of the week d Main menu > Calendar 1. 2. Select Week starts on 3. Select the required day of the week Setting holidays You can set holidays to be indicated in red. d Main menu > Calendar 1. 2. Select Holiday set 3.

[5] (Options) 7 Select Settings

[192] to scroll to the required day of the week 7 [0]

Repeat this step to select other days of the week.

[5] (Ok) 4. Chinese Lunar calendar You can check Chinese Lunar calendar dates and festivals when still viewing western calendar. To display Chinese Lunar calendar, you need to select Chinese language in Display language setting (see page 91). Switching on/off Chinese Lunar calendar d Main menu > Calendar 1. 2. Select Lunar calendar 3. Select On or Off Viewing Chinese Lunar calendar detail d Main menu > Calendar 1. 2.

[1929394] to scroll to the day you wish to view the detail

[5] (Options) 7 Select Lunar calendar detail

[5] (Options) 7 Select Settings 130 VS7_AAA.book Page 131 Wednesday, August 3, 2005 5:10 PM My Media My Media menu structure Pictures........................... 132 Stored pictures ..................... 132 Download*1 .......................... 136 Take new picture .................. 136 Sounds............................ 136 Stored sounds ...................... 136 Download*1 .......................... 138 Record new sound ............... 138 Games .............................140 Stored applications ...............140 Download*1...........................141 Text templates ................141 Memory status ................142 Videos............................. 139 Stored videos ....................... 139 Download*1 .......................... 140 Record new video ................ 140

*1 Note: There are several ways to select items from menu lists. See Menu selection method on page 26. 131 VS7_AAA.book Page 132 Wednesday, August 3, 2005 5:10 PM My Media Pictures Pictures taken by Camera, images downloaded from a WAP site and received via infrared or Bluetooth are stored in the Pictures folder. Note: To use a file downloaded or indicated by the icon (

), you may need to purchase the rights. For further information, contact your service provider. Viewing pictures d Main menu > My Media > Pictures > Stored pictures 1.

[1929394] to scroll to the required thumbnail 7 [0]

You can view the actual size of the selected picture by pressing [0] if the picture is larger than the display. To continue onto step 2, press [6]

(Back).

[4]9[2] to view the next picture or [3]9[1] to view the previous picture 2. Note: The file size of highlighted picture is displayed under the picture title, together with the date and time the image was stored. A picture of less than 1 kB is displayed as 1 kB. Managing files To make a new folder:

1. In the Stored pictures folder, [5] (Options) 7 Select Manage files 2. Select New folder 3. Enter folder name 7 [0]

To move the selected picture to another folder:

1. When the required thumbnail is highlighted, [5] (Options) 7 Select Manage files 2. Select Move to folder 3. Select the required folder 132 VS7_AAA.book Page 133 Wednesday, August 3, 2005 5:10 PM Options When viewing the picture list, the following options are available by pressing [5] (Options). My Media Send as MMS Use as Delete Delete all Activate Rename Send via Resize Edit Change view Manage files Details Attach the selected picture to an MMS message. See Creating an MMS message on page 58. Use the selected picture as Wallpaper, External wallpaper or Contacts picture. See Using pictures on page 134. Delete the selected picture or folder. Delete all the pictures in the folder or all the folders. Purchase your rights to view the selected picture. Rename the selected picture or folder. Send the selected picture via infrared or Bluetooth. See Infrared on page 105 or Bluetooth wireless technology on page 107. Resize the selected picture. Edit the selected picture. See Editing pictures on page 134. Change the picture list to List view or Grid view. Make a new folder or move the selected picture to another folder. See Managing files on page 132. Show details of the selected picture. Note: Sending or editing of a forward locked picture indicated by the icon

) is restricted. 133 VS7_AAA.book Page 134 Wednesday, August 3, 2005 5:10 PM My Media Using pictures You can use the stored pictures as wallpapers, external wallpapers or Contacts pictures. d Main menu > My Media > Pictures > Stored pictures 1. 2. 3. Select Wallpaper, External wallpaper or Contacts picture

[1929394] to scroll to the required picture

[5] (Options) 7 Select Use as

(If Contacts picture is selected, go to the next step.)

[5] (Save) 4. Highlight the required contact 7 [5] (Select) 5. Editing pictures Adding frame You can add a frame to your picture. d Main menu > My Media > Pictures > Stored pictures 1. When the required thumbnail is highlighted or the required picture is displayed on the screen, [5] (Options) 7 Select Edit 2. Select Add frame 3. Select the required frame The picture with the selected frame is displayed. You can change the frame by pressing [394].

[0]9[5] (Save) 4. 5. Enter the file name 7 [0]

Note: Adding a frame is available only when the size of the picture to be edited is Medium 320x240, Small 160x120 or Main display 240x320. 134 VS7_AAA.book Page 135 Wednesday, August 3, 2005 5:10 PM My Media Trimming You can trim your pictures. d Main menu > My Media > Pictures > Stored pictures 1. When the required thumbnail is highlighted or the required picture is displayed on the screen, [5] (Options) 7 Select Edit 2. Select Trimming 3. Select the required trimming size 4. If Free size is selected: [1929394] to determine the starting point 7 [0]9[5] (Start) 7 [1929394] to determine the ending point 7 [0]9[5] (Ok) If a size other than Free size is selected: [1929394] to move the trimming box 7 [0]9[5] (Start)

[0]9[5] (Save) 5. 6. Enter the file name 7 [0]

Clearing shadow You can make dark pictures clearer. d Main menu > My Media > Pictures > Stored pictures 1. When the required thumbnail is highlighted or the required picture is displayed on the screen, [5] (Options) 7 Select Edit 2. Select Clear shadow 3. 4. Enter the file name 7 [0]

[0]9[5] (Save) 135 VS7_AAA.book Page 136 Wednesday, August 3, 2005 5:10 PM My Media Downloading picture files d Main menu > My Media > Pictures > Download The download site is displayed. Note: Panasonic is not responsible for the performance of downloaded contents or possible corruption of phone software. For downloading contents, visit http://box.panasonic.com/

Taking a new picture d Main menu > My Media > Pictures > Take new picture The phone switches to Picture mode. See Taking a picture on page 72. Sounds Sound clips recorded by Sound recorder, downloaded from a WAP site and received via infrared or Bluetooth are stored in the Sounds folder. Note: To use a file downloaded or indicated by the icon (

), you may need to purchase the rights. For further information, contact your service provider. Playing sound clips d Main menu > My Media > Sounds > Stored sounds 1.

[192] to scroll to the required sound file 7 [0]

[192] to adjust the volume. 2. To stop: [0]

To restart: [5] (Restart) Note: The VS7 supports the ISO standard for MP3, nonconforming MP3 formats may not play properly. 136 VS7_AAA.book Page 137 Wednesday, August 3, 2005 5:10 PM My Media Managing files You can make new folders or move the selected sound files to another folder. See Managing files on page 132. Options In the sound list, the following options are available by pressing [5]

(Options). Send as MMS Use as Play in sequence Delete Delete all Activate Rename Send via Manage files Details Attach the selected sound clip to an MMS message. See Creating an MMS message on page 58. Use the selected sound clip as Ringtone, Message alert or Contacts ringtone. See Using sound clips on page 138. Select Looped or Random to play all the sound clips in the selected folder in a loop or at random. Delete the selected sound file or folder. Delete all the sound files in the folder or all the folders. Purchase your rights to play the selected sound file. Rename the selected sound file or folder. Send the selected sound file via infrared or Bluetooth. See Infrared on page 105 or Bluetooth wireless technology on page 107. Make a new folder or move the selected sound file to another folder. See Managing files on page 132. Show details of the selected sound file. 137 VS7_AAA.book Page 138 Wednesday, August 3, 2005 5:10 PM My Media Note: The file size of highlighted sound is displayed at the top of the list, together with the date and time the sound file was stored. A sound file of less than 1 kB is displayed as 1 kB. Sending or editing of a forward locked sound indicated by the icon (

restricted.

) is Using sound clips You can use the stored sound clips as ringtones, Message alerts or Contacts ringtones. d Main menu > My Media > Sounds > Stored sounds 1. 2. 3. Select Ringtone, Message alert or Contacts ringtone

(If Contacts ringtone is selected, go to the next step.)

[192] to scroll to the required sound clip

[5] (Options) 7 Select Use as 4. Highlight the required contact 7 [5] (Select) 5. Select Ringtone (

) 6.

) or Message alert (

[5] (Save) Downloading sound clips d Main menu > My Media > Sounds > Download The download site is displayed. Note: Panasonic is not responsible for the performance of downloaded contents or possible corruption of phone software. For downloading contents, visit http://box.panasonic.com/

Recording new sound clips d Main menu > My Media > Sounds > Record new sound The phone switches to the Sound recorder mode. See Sound recorder on page 123. 138 VS7_AAA.book Page 139 Wednesday, August 3, 2005 5:10 PM My Media Videos Video clips recorded by Video recorder, downloaded from a WAP site and received via infrared or Bluetooth are stored in the Videos folder. Note: To use a file downloaded or indicated by the icon (

), you may need to purchase the rights. For further information, contact your service provider. Playing video clips d Main menu > My Media > Videos > Stored videos 1.

[192] to scroll to the required video file 7 [0]

[192] to adjust the volume. 2. To stop: [0]

To restart: [5] (Restart) Note: The file size of highlighted video is displayed at the top of the list, together with the date and time the video file was stored. A video file of less than 1 kB is displayed as 1 kB. Managing files You can make new folders or move the selected video files to another folder. See Managing files on page 132. Options In the video list, the same options in the Stored sounds folder are available. See Options on page 137. Note that Use as option is not available for video files. 139 VS7_AAA.book Page 140 Wednesday, August 3, 2005 5:10 PM My Media Downloading video clips d Main menu > My Media > Videos > Download The download site is displayed. Note: Panasonic is not responsible for the performance of downloaded contents or possible corruption of phone software. For downloading contents, visit http://box.panasonic.com/

Recording a new video d Main menu > My Media > Videos > Record new video The phone switches to Video mode. See Recording a video clip on page 78. Games Preloaded games and downloaded games are stored in the Games folder. Note: To use a file downloaded or indicated by the icon (

), you may need to purchase the rights. For further information, contact your service provider. Playing games d Main menu > My Media > Games > Stored applications 1.

[192] to scroll to the required game 7 [0]

For further details, see Games on page 144. 140 VS7_AAA.book Page 141 Wednesday, August 3, 2005 5:10 PM My Media Downloading games d Main menu > My Media > Games > Download For further details, see Download games on page 146. Note: Panasonic is not responsible for the performance of downloaded contents or possible corruption of phone software. For downloading contents, visit http://box.panasonic.com/

Text templates You can use templates stored in the phone when creating a text message. You can also save frequently used text as templates. Editing Text templates d Main menu > My Media > Text templates 1. 2. Edit the template 7 [0]

Options In the text templates list, the following options are available by pressing [5] (Options).

[192] to scroll to the required template 7 [0]

New Create message Edit Delete Delete all Details Create a new template. Create an SMS or MMS message using the selected template. Edit the selected template. Delete the selected template. Delete all the templates. Show details of the selected template file. 141 VS7_AAA.book Page 142 Wednesday, August 3, 2005 5:10 PM My Media Memory status You can see how much data is stored in the individual folders in My Media. d Main menu > My Media > Memory status Note: To decrease the amount of phone memory used, delete unwanted data or store data on your PC (see CD-ROM on page 152). 142 VS7_AAA.book Page 143 Wednesday, August 3, 2005 5:10 PM Games Games menu structure Games............................. 144 Download*1..................... 146 Settings........................... 147 Sound volume ...................... 147 Backlight............................... 147 Vibration ............................... 147 Reset.................................... 147 WAP profiles......................... 147 Information..................... 147

*1 Note: There are several ways to select items from menu lists. See Menu selection method on page 26. 143 VS7_AAA.book Page 144 Wednesday, August 3, 2005 5:10 PM Games Games Selecting games Your phone has preinstalled JavaTM applications. The downloaded JavaTM applications are also listed here. d Main menu > Games > Games 1. 2.

[192] to scroll to the required application

[5] (Options) 7 Select the required option Run Permission Details Delete Activate Run the selected JavaTM application. Select Network access, Messaging or Auto invocation, then select Always allowed, Ask first time, Ask every time or Not allowed. Show the application name, version, vendor, storage size, etc. Delete the selected JavaTM application (except for the preinstalled applications). Purchase your rights to run the selected JavaTM application. Note: Your phone supports J2METM JavaTM applications. Other types of JavaTM applications cannot be installed. Bluetooth headset cannot be used for listening for sounds during the games. 144 VS7_AAA.book Page 145 Wednesday, August 3, 2005 5:10 PM Games SONIC THE HEDGEHOG This is a mobile version of the high speed action classic, SONIC THE HEDGEHOG, which originally debuted in 1991 on the Mega Drive (SEGA Genesis). Save the animals from the evil scientific genius, Dr. Eggman, and stop him from taking over the world!

Your objective is to get Sonic to the end of the game in one piece!

The game has 6 Zones, and each Zone is divided into 3 Acts. In Act 3, Dr. Eggman will arrive in his contraption. Beat him to clear the Zone. d Main menu > Games > Games > SONIC THE HEDGEHOG Key operation:

Move/Dash right Move/Dash left Jump Look Up Crouch Spin Soccer This game is a 3D soccer game. Play and win exhibition game with selected country. d Main menu > Games > Games > Soccer Key operation:

Press [4] or press [H] key. Press [3] or press [F] key. Press [1] or press [S] key. Press [0] or press [G] key. Press [2] or press [J] key. Press [2] or press [J] key (during dash). Move/Dribble Shoot Pass Slide tackle Press Navigation key. Press [r] key. Press [0] or press [G] key with a ball. Press [0] or press [G] key without a ball. 145 VS7_AAA.book Page 146 Wednesday, August 3, 2005 5:10 PM Games Suspending/Terminating the game 1. 2. Select Suspend or Terminate

[Y]

When you select Suspend, JavaTM icon (

screen.

) appears on the standby To resume the game:

d Main menu > Games > Games 1. Select Resume The JavaTM application starts running. Note: You can also suspend the JavaTM application by closing the flip. Download games You can download games to your phone from WAP sites. For customer support of downloaded contents, visit the respective suppliers web sites. d Main menu > Games > Download 1. Select the required JavaTM application When the downloading is over, Would you like to run application?

appears. 2. To run the JavaTM application: [0]9[5] (Ok) To exit: [Y]9[6] (Cancel) Note: Panasonic is not responsible for the performance of downloaded contents or possible corruption of phone software. For downloading contents, visit http://box.panasonic.com/

146 VS7_AAA.book Page 147 Wednesday, August 3, 2005 5:10 PM Games Settings d Main menu > Games > Settings 1. Select the required setting Sound volume Backlight Vibration Reset WAP profiles Adjust the sound volume of JavaTM applications. Switch the backlight on in Application preference or System preference, or switch Off. Switch the vibration function for JavaTM applications On or Off. Delete all the downloaded JavaTM applications, reset records of preloaded JavaTM application and initialise JavaTM settings. Select the required profile setting. Information You can view copyright information about the software used on the phone. d Main menu > Games > Information 147 VS7_AAA.book Page 148 Wednesday, August 3, 2005 5:10 PM Appendix Accessories The following accessories are available for your Panasonic phone. Note: Availability depends on your country/region. Battery (EB-BS001) Double your talk time by having a spare battery. Travel Charger Carry this wherever you go, so you can always recharge your battery.

(EB-CA001 AU)

(EB-CA001 EU)

(EB-CA001 UK)

(EB-CA001 US) 148 VS7_AAA.book Page 149 Wednesday, August 3, 2005 5:10 PM Personal Handsfree (Mono) (EB-EMX800) Plug into your phone and talk without holding the phone to your ear. Appendix Personal Handsfree (Stereo) (EB-EM001) Talk/listen to the music and move while keeping your hands free, by using a Personal Handsfree. Put the ear pieces in your ears and the adaptor in the side of the phone. In-Car Charger (EB-CD001) Recharge the battery using your vehicles cigarette lighter socket. Car Holder (EB-KA001) This can be mounted in your vehicle to store your phone. 149 VS7_AAA.book Page 150 Wednesday, August 3, 2005 5:10 PM Appendix USB Cable (EB-USX800) Use this to connect your phone to a PC to transfer data between them. Use in conjunction with the software provided on the CD-ROM. Branch Cable (EB-CBX800) This cable branches the connection to a USB Cable, Personal Handsfree and Travel Charger so that you can transfer data OR talk on handsfree while charging. Bluetooth headset (EB-BHX70) Talk handsfree and without wires. Place the headset on your ear and the phone in your pocket, with no wires connecting the two. 150 VS7_AAA.book Page 151 Wednesday, August 3, 2005 5:10 PM Contact AUSTRALIA HONG KONG INDIA INDONESIA MALAYSIA NEW ZEALAND PHILIPPINES SINGAPORE TAIWAN THAILAND VIETNAM BRASIL COLOMBIA MEXICO PANAMA PERU VENEZUELA Appendix

(ASIA-PACIFIC) Panasonic Australia Shun Hing Technology Co., Ltd. Panasonic India Pvt. Ltd. PT. MET GOBEL Panasonic Malaysia Sdn, Bhd. 132-600 2313-0888

(0120)-256-7045

(021)-8015666

(03)-55422288 Panasonic New Zealand Ltd.

(09)-272-0100 Panasonic Philippines Panasonic Singapore Panasonic Systems Sales Taiwan Co., Ltd. Panasonic Siew Sales (Thailand) Co., Ltd. Matsushita Electric Industrial Co., Ltd. Ho Chi Minh Office

(LATIN AMERICA) Panasonic do Brasil Ltda. Panasonic de Colombia S.A. Panasonic de Mexico, S.A. de C.V. Panasonic Latin America, S.A. Panasonic Peruana S.A. Panasonic de Venezuela, C.A.

(02)-899-4595 to 98 6282-6868

(02)-2227-6111

(02)-731-8888 ex. 2310

(08)-8219160

(0800)-704-2019

(1)-623-3383

(55)-5-488-1000

(229)-2955

(1)-614-0000

(212)-945-3022 151 VS7_AAA.book Page 152 Wednesday, August 3, 2005 5:10 PM Appendix CD-ROM PC Software The CD-ROM supplied with your VS7 phone contains a software application which allows you to manage the information in your phone from a Personal Computer (PC). This application includes:

Handset Manager With Handset Manager you can easily manage your phone information on a PC and synchronise it back to the phone. This information includes contacts, calendar, messages and the image, video and sound data held in your VS7 phone. For further information please refer to the documentation on the CD-ROM, or to the Panasonic website http://panasonic.co.jp/pmc/products/en/support/index.html Installing the Software The software is compatible with PCs and laptops running Microsoft WindowsTM 98 SE, Windows Me, Windows 2000 and Windows XP. On most PCs the software should auto-install when the CD-ROM is inserted into the CD drive. If not, then autoplay must be manually selected in Windows Explorer. Follow the instructions that appear on the PC screen to install the software. 152 VS7_AAA.book Page 153 Wednesday, August 3, 2005 5:10 PM Appendix Changing the X-Changeable CoverTM Before changing the cover, always switch off the power and disconnect the phone from the charger or any other device. For your safety, follow these procedures when removing or attaching the cover. Removing the cover Loosen and remove the 4 screws with the screw driver included in this package and then gently remove the cover. Attaching the cover Place the cover right in the hollow in the phone and align the bottom edge of the cover with that of the hollow. Tighten the 4 screws firmly. Ensure that there is no dust caught between the cover and the hollow. Note: Do not use the phone without the cover attached. Do not force the cover when removing or replacing. Before tightening the screws, ensure the cover is located correctly. Do not force or over tighten the screws. Use only covers designed for this model. 153 VS7_AAA.book Page 154 Wednesday, August 3, 2005 5:10 PM Appendix Troubleshooting Problems Should any problem persist, contact your dealer. Problem Cause Remedy Check that the battery is fully charged and correctly connected to the phone. The network you are using and the condition of the battery can affect battery life. The battery has worn out. Replace with a new fully charged battery. The battery is not attached to the phone or the battery has been deeply discharged. Leave the phone charging the battery for a few minutes before the battery charge level indicator appears and attempt to switch the phone on. The battery is not attached to the phone. The battery was connected to the phone after the charger was connected. Ensure the battery is fitted to the phone prior to commencing charging. Phone will not switch on. Extremely short battery life for a new battery. Short battery life for an old battery. The battery charge level indicator does not appear and the phone cannot be switched on when charging. Battery fails to charge. 154 VS7_AAA.book Page 155 Wednesday, August 3, 2005 5:10 PM Problem Battery fails to charge. Display looks faded. Calls cannot be made. Calls cannot be received. Cause The battery temperature exceeds the charging temperature range

(too hot or too cold). The Brightness level is low. Keyguard is on. Outgoing calls are barred. Fixed dialling is switched on so that only the numbers stored in Contacts can be dialled. The phone is not registered with a network. The phone is not switched on. Incoming calls are barred. The phone is not registered with a network. Emergency calls cannot be made. You are not in a GSM coverage area. Appendix Remedy Use the battery at room temperature. Check the Brightness setting

(see page 96). Disable keyguard. Disable outgoing call barring or barred dialling. Switch off the Fixed dialling. Move to a coverage area and operate your phone after it has registered with a network. Switch the phone on. Disable incoming call barring. Move to a coverage area and operate your phone after it has registered with a network. Check that the antenna symbol

(p) is displayed - move to a coverage area and operate your phone when the antenna symbol is displayed. 155 VS7_AAA.book Page 156 Wednesday, August 3, 2005 5:10 PM Appendix Error messages These are some of the most important error messages which may be displayed:

Location area not allowed!

Network not allowed! Roaming with the selected network is not allowed. Roaming in the selected area is not allowed. The network has detected an authentication failure because your SIM card is not registered with that network - contact your service provider. The SIM card is blocked because the PIN unblocking key (PUK) has been entered incorrectly 10 times - contact your service provider. The phone has detected a problem with the SIM card - switch the phone off and then back on; if the message is still displayed - contact your service provider. The SIM card has failed one or more of the SIM personalisation checks - contact your service provider. The selected feature is either not supported by the SIM card or is not available with the current subscription - contact your service provider. The PIN2 is blocked permanently because the wrong PUK2 has been entered 10 times, services controlled by PIN2 cannot be used - contact your service provider. A message has been received but the message store is full - to receive messages, delete some of the currently stored messages. Security failure!

SIM blocked Restarting SIM. Please wait Invalid SIM Function unavailable PIN2 invalidated Message rejected. Storage full or Message rejected. SIM full 156 VS7_AAA.book Page 157 Wednesday, August 3, 2005 5:10 PM Appendix Memory low!

Message may not be stored Verification failure The message area is full. Your messages cannot be stored until some of the currently stored messages are deleted. On changing the PIN/PIN2, verification of the new code is incorrect - retry changing the PIN/PIN2 with correct verification. Glossary of terms CSD DTMF GPRS GSM Infrared JavaTM Network Operator PIN / PIN2 Circuit Switched Data. A communication method used to transmit data over telephone connections. Dual Tone Multi-Frequency allows you to communicate with computerised phone systems, voice mailboxes, etc. General Packet Radio Service. A GSM transmission technique that transmits and receives data in packets rather than setting up a continuous channel. Global System for Mobile communications. The name given to the advanced digital technology that your phone uses. A type of wireless connection that allows data to be transmitted directly to another device. A programming language developed by Sun Microsystems. Programs written in Java do not rely on an operating system. The organisation responsible for operating a GSM network. Personal Identification Number. PIN is used for SIM card security. PIN2 is used for the control of Fixed dialling and Call charges metering. Supplied by your service provider. If the PIN or PIN2 is entered incorrectly several times (basically 3 times), the PIN or PIN2 will be blocked. 157 VS7_AAA.book Page 158 Wednesday, August 3, 2005 5:10 PM Appendix PUK / PUK2 Roaming Service provider SIM URL WAP PIN or PIN2 Unblocking Key. Used to unblock the PIN or PIN2 code. Supplied by your service provider. If the PUK or PUK2 is entered incorrectly 10 times, the PUK or PUK2 will be blocked. The ability to use your phone on networks other than your home network. The organisation responsible for providing access to the GSM/GPRS network. Subscriber Identity Module. A small smart-card which stores unique subscriber and user entered information such as Contacts entries and short messages. Supplied by your service provider. Uniform Resource Locator. The URL is an alphanumeric address that points to homepages and other Internet locations. Wireless Application Protocol. The communication standard which enables you to download resources from the Internet to your phone. Specifications Bands supported Standby time*1 Talk time*1 Charging time*2 Temperature range Weight 158 GSM 900 Class 4 GSM 1800 Class 1 GSM 1900 Class 1 Up to 240 hours Up to 300 minutes Up to 150 minutes Charging: +5C - +35C Storage: -20C - +60C 113 g (including battery) VS7_AAA.book Page 159 Wednesday, August 3, 2005 5:10 PM Dimensions

(excluding protrusions) Volume Battery Antenna SIM type Memory storage Display Camera Connectivity Appendix Height: 102 mm Width: 50.6 mm Depth: 18.7 mm 93 cc 830 mAh Li-ion Internal 1.8 V/3 V MMS: 2 MB User data (excluding MMS) and preinstalled applications: 30 MB Main display: QVGA 240 x 320 pixels TFT LCD; Approx. 16 million colours

(JPEG and camera/video image*3);

Approx. 300 cd/m2 brightness Sub display: 96 x 64 pixels STN LCD;

4 k colours 2 M pixels CMOS Infrared: SIR (slow infrared) USB: v2.0 Bluetooth: Serial Port, Object Push, Generic Object Exchange, Headset and Handsfree profiles

*1 Talk and Standby times will be dependant upon network conditions, SIM card, backlight usage, battery condition/charging management and the use of applications such as camera and games where available.

*2 Charging time depends on usage and battery condition.

*3 65 k colours for other image formats 159 VS7_AAA.book Page 160 Wednesday, August 3, 2005 5:10 PM Licensing 2005 Panasonic Mobile Communications Co., Ltd. All rights reserved. Information in this document is subject to change without notice. No part of these instructions may be reproduced or transmitted in any form or by any means without obtaining written permission from Panasonic Mobile Communications Co., Ltd. CP8 Patent Panasonic VS7 with Bluetooth Technology The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Panasonic Mobile Communications Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. T9 Text Input is licensed under one or more of the following:

U.S. Pat. Nos. 5,187,480, 5,818,437, 5,945,928, 5,953,541, 6,011,554, 6,286,064, 6,307,548, 6,307,549, and 6,636,162, 6,646,573; Australian Pat. Nos. 727539, 746674, and 747901; Canadian Pat. Nos.1,331,057, 2,302,595, and 2,227,904; Japan Pat. No. 3532780, 3492981; United Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No. HK1010924; Republic of Singapore Pat. No. 51383, 66959, and 71979; European Pat. Nos. 0 842 463 (96927260.8), 1 010 057

(98903671.0), 1 018 069 (98950708.2); Republic of Korea Pat. Nos. KR201211B1 and KR226206B1. Peoples Republic of China Pat. Application Nos. 98802801.8, 98809472.X and 96196739.0; Mexico Pat. No. 208141; Russian Federation Pat. No. 2206118; and additional patents are pending worldwide. 160 VS7_AAA.book Page 161 Wednesday, August 3, 2005 5:10 PM Licensing Copyright 2003 by Bitstream, Inc. All Rights Reserved. Bitstream Vera is a trademark of Bitstream, Inc. For further information, please refer to:

http://www.w3.org/2003/08/sera/COPYRIGHT.TXT Powered by Mascot Capsule/Micro3D EditionTM Mascot Capsule is a registered trademark of HI Corporation 2005 HI Corporation. All Rights Reserved. Aplix, microJBlend and JBlend, and all Aplix-or JBlend-related trademarks and logos are trademarks or registered trademarks of Aplix Corporation in the U.S., Japan and other countries. This product is licensed under the MPEG-4 patent portfolio license for the personal and non-commercial use of a consumer to (i) encode video in compliance with the MPEG-4 Visual Standard (MPEG-4 Video) and/or (ii) decode MPEG-4 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a licensed video provider. No license is granted or implied for any other use. Additional information may be obtained from MPEG LA,LLC. MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. SONIC THE HEDGEHOGTM SEGA Corporation MUSIC COMPOSED BY MASATO NAKAMURA Two music (Sonic Zone1.mmf / Sonic Invisible.mmf) SEGA Corporation MUSIC COMPOSED BY MASATO NAKAMURA SEGA, the SEGA logo and SONIC THE HEDGEHOG are either registered trademarks or trademarks of SEGA Corporation. 161 VS7_AAA.book Page 162 Wednesday, August 3, 2005 5:10 PM Licensing END-USER SOFTWARE LICENSE AGREEMENT By use of this Panasonic cellular phone, including any embedded software features or programs ("Embedded Software"), you agree to the terms and conditions of this End-User Software License Agreement ("EULA"). 1. END-USER RIGHTS: You are granted a limited end-user right to use the Embedded Software only as part of and together with this Panasonic cellular phone. You agree to use the Embedded Software in a manner that complies with all applicable laws, including laws related to copyright and other intellectual property rights. All other uses are prohibited. 2. LIMITATIONS ON END-USER RIGHTS:

(a) You may not reproduce, copy, or transfer the Embedded Software to any other device;

(b) You may not create derivative works of any type based on the Embedded Software (unless and except as expressly permitted as part of a feature application);

(c) You may not reverse engineer, reverse compile, disassemble, or otherwise attempt to discover the source code of the Embedded Software;

(d) You may not transfer this Panasonic cellular phone other than to a transferee end-user who undertakes to observe the same obligations as those set out in this EULA;

(e) You may not remove any proprietary notices, such as copyright, trademark, or otherwise, from the Embedded Software. 3. INTELLECTUAL PROPERTY RIGHTS: The Embedded Software is protected by copyright, trademark, patent and/or other intellectual property rights and is owned by Panasonic Mobile Communications Co., Ltd. ("PMC") and/or is under license from PMC's licensors. 4. TERMINATION: Your right to use the Embedded Software may be terminated for failure to comply with any of the terms of this EULA. 162 VS7_AAA.book Page 163 Wednesday, August 3, 2005 5:10 PM Licensing 5. LIMITATION OF LIABILITY/DISCLAIMER OF WARRANTIES: TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL PMC, ITS AFFILIATES, AND THEIR LICENSORS BE LIABLE FOR INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE EMBEDDED SOFTWARE. EXCEPT AS EXPRESSLY STATED IN THE RELEVANT WARRANTY CARD, PMC, ITS AFFILIATES, AND THEIR LICENSORS DISCLAIM ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDIES PROVIDED TO THE END-USER IN THE RELEVANT WARRANTY CARD ARE EXCLUSIVE. 6. ADDITIONAL THIRD PARTY TERMS: The Embedded Software may contain third party software subject to separate third party license terms and conditions set forth in the user manual or associated product documentation and/or displayed on the LCD of this Panasonic cellular phone. You acknowledge and agree that such third party software is governed by the third party license terms, as applicable, and that such terms are solely between you and the applicable licensor. 7. EXPORT REGULATIONS/RESTRICTED RIGHTS: The Embedded Software is subject to U.S. export control laws, including the U.S. Export Administration Act and its associated regulations, and may be subject to export or import regulations in other countries. You agree to comply strictly with all such regulations. You confirm that with respect to the Embedded Software, you will not export or re-export it, directly or indirectly, to any countries that are subject to U.S. export restrictions. Use, duplication or disclosure by the U.S. government is subject to the restrictions as set forth in the Rights in Technical Data and Computer Software Clauses in DFARS 252.227-7013(c)(1)(ii) and FAR 52.227-

19(c)(2) as applicable. 163 VS7_AAA.book Page 164 Wednesday, August 3, 2005 5:10 PM Index A Active flip .................................. 103 Alarms ...................................... 121 Alert mute ................................... 30 Answering calls .......................... 29 Any key answer ........................ 102 Archive ....................................... 64 Auto answer ............................. 103 Auto redial .................................. 27 B Backlight time ............................. 99 Battery Charging ................................... 21 Inserting ................................... 20 Removing ................................. 20 Bluetooth .................................. 107 Bookmarks ................................. 84 Brightness .................................. 96 Browser ...................................... 81 Browser options Advanced ................................. 87 Bookmarks ............................... 84 Enter address ........................... 85 Reload page ............................. 86 Save media .............................. 85 Service Inbox ........................... 86 Set as bookmark ...................... 85 Settings .................................... 87 C Calculator ................................. 124 Calendar ................................... 125 Call Answering ................................ 29 Duration .................................. 103 Hold .......................................... 32 Making ...................................... 27 Call barring ............................... 118 Call diverts ............................... 101 164 Call log ........................................ 47 Call waiting ............................... 102 Calls .......................................... 101 Camera ....................................... 70 Cell Broadcast .......................... 114 Chat ............................................ 66 Clock ........................................... 91 Conference ................................. 35 Connectivity settings ................. 105 Contacts ..................................... 41 Continuous shooting ................... 76 Creating a message MMS ......................................... 58 SMS .......................................... 55 D Display Front display ............................. 15 Main display ............................. 15 Settings .................................... 96 Download Games ............................ 141, 146 Picture files ............................. 136 Sound clips ............................. 138 Video clips .............................. 140 Drafts folder ................................ 64 DTMF .......................................... 33 E Emergency call ........................... 29 Emoticon list ............................... 56 Error messages ........................ 156 F Fixed dial .................................. 118 G Games ...................................... 144 Games folder ............................ 140 GSM network ............................ 115 VS7_AAA.book Page 165 Wednesday, August 3, 2005 5:10 PM H Handsfree talking ....................... 33 Hold ............................................ 32 How to read this manual .............. 8 I Icons ........................................... 16 Main menu icons ...................... 98 Status icons ............................. 16 Illumination message ................. 55 Illuminations ............................... 92 Inbox .......................................... 60 In-call operations ........................ 32 Indicator/Illumination Light ......... 18 Infrared ..................................... 105 Input method .............................. 36 International dialling ................... 28 K Key Backlight .................................. 93 Functions ................................. 12 Keyguard .................................. 94 Quick keys ............................... 13 Settings .................................... 93 Shortcut .................................... 94 Tone ......................................... 93 Volume ..................................... 93 L Language Cell Broadcast ........................ 114 Display ..................................... 91 Input ................................... 57, 91 M Main menu icons ......................................... 98 Structure .................................. 24 Making calls ............................... 27 Master reset ............................... 95 Index Memory status Contacts ................................... 51 My Media ................................ 142 SMS/MMS ................................ 69 Menu Displaying the menu ................. 25 Menu selection method ............ 26 Message alert ............................. 99 Messages settings ...................... 67 Missed call notification ................ 30 MMS ........................................... 54 Multi shot mode .......................... 76 Multiple calls operations ............. 34 My dictionary .............................. 38 My number .................................. 50 O Operator name ........................... 96 Outbox folder .............................. 64 P Phone Opening/closing ........................ 23 Overview .................................. 10 Settings .................................... 90 Switching on/off ........................ 23 Picture ........................................ 71 Pictures folder ........................... 132 PIN/PIN2 code .......................... 117 Problems .................................. 154 Profiles ........................................ 90 Q Quick keys .................................. 13 R Recent call dialling ...................... 28 Recording a video clip ................ 78 Ringtone ..................................... 99 165 VS7_AAA.book Page 166 Wednesday, August 3, 2005 5:10 PM Voicemail .................................... 66 Volume control ............................ 33 W Wallpaper ................................... 96 Warning tone ............................ 100 Web mail ..................................... 65 X X-Changeable CoverTM ............ 153 Index S Security settings ....................... 117 Self-portrait ................................. 72 Send my number ...................... 103 Sent folder .................................. 64 Service charge ......................... 104 Service numbers ........................ 52 Shortcut keys ............................. 94 Shutdown tone ......................... 100 Silent mode ................................ 31 SIM card Inserting ................................... 19 Removing ................................. 19 SIM Tool Kit .............................. 121 SMS ........................................... 54 Sound recorder ........................ 123 Sounds & alerts settings ............ 99 Sounds folder ........................... 136 Speed dial .................................. 48 Standby display .......................... 15 Startup tone .............................. 100 Status icons ................................ 16 Symbols used in this manual ........ 7 Synchronisation .................. 49, 112 T T9 ............................................. 38 Taking a picture .......................... 72 Text entry ................................... 36 Text templates .......................... 141 Themes ...................................... 99 Time and date ............................ 91 U Unsent folder .............................. 64 USB .......................................... 116 V Vibration alert ........................... 100 Video, record .............................. 78 Videos folder ............................ 139 166