Add -on C amera WVS1000 User manual WVS1000 Camera Add-on Camera WVS1000 User manual TIP Before you install the camera, carefully plan where and how it will be positioned, and where you will route the cable that connects the camera to the power adaptor. Camera Power Adapter Avoid installing in a location which requires the wireless signal to pass through cement, concrete and metal structures. This will reduce the transmission range. Charging the Camera It is recommended to charge your camera before initial use. 1. Plug the AC power connector from the power adapter into the AC adapter port on the camera. 2. Connect the power adapter to a power outlet. 3. The charging LED glows red to indicate the camera is charging. Charging LED NOTE:
Only use the included power adapter to charge the camera(s). Charge the camera for 8 hours to fully charge. USB jack is only for power supply use. No data is transferred. Skypegateway Camera Add -on C amera WVS1000 User manual 1. Hardware Setup Procedure 1.1 WVS1000 Power line Internet line Antenna If the device is setup properly, all the LED's in the front panel will light up;
and the two LED's at the RJ45 socket will flash. WVS1000 will get an IP address from the connected network and will connect to Skype automatically (if default account is set for the device) . 1.2 Wireless Cameras Connect the camera with the USB power adapter and switch it on. WVS1000 Camera Add -on C amera WVS1000 User manual 2. Software Setup Procedure 2.1 Install the PC application for the WVS1000
(support Windows XP, Vista, 7) 2.1.1 Insert the install disk and double-click the setup.exe. Follow all the instruction in the installation procedure. Normally, just press Next for default installation. If Skype application is not installed on computer, it will download the latest Skype and install it. Add -on C amera WVS1000 User manual 2. Software Setup Procedure The following shows completion of installation. Add -on C amera WVS1000 User manual 2. Software Setup Procedure 2.2 Skype 2.2.1 Create a default skype account for WVS1000
(assume WVS1000username as the skype name for this guide) Run local Skype application, logout any existing account if it is online. Click to create account 2.2.2 Login with WVS1000username WVS1000username
CameraWVS1000 Add -on C amera WVS1000 User manual 2. Software Setup Procedure 2.2.3 Add a contact to the default skype account. you can add your personal Skype account into the contact list The added users will be able to connect to the WVS1000 for video stream!
User manual After adding user contact, sign out default WVS1000 Skype account and signin your personal Skype account to accept invitation Add -on C amera WVS1000 User manual 2. Software Setup Procedure 2.3 OVIZEE WVS1000. 2.3.1 In network connection, find the Upnp device named Ovizee.
(if you cannot find the device, that means your Upnp service is not running on Windows, please go to Appendix A. Check if Upnp is running before proceeding) In Windows XP Double-click the icons to go into configuration website. Ovizee In Windows Vista In Windows 7 Ovizee Ovizee Double-click the WVS1000 icon to pop up an internal webpage. Ovizee Add-on Camera WVS1000 User manual 2. Software Setup Procedure 2.3 OVIZEE WVS1000 (web configuration) 2.3.2 During the initial setup, select an appropriate time zone and click Next. Double-click the icons to go into configuration website. WV 0 2.3.3 If you have an existing Skype account for WVS1000,
(following the steps in section 2.2.1), enter the corresponding information here, then click Next. If you do not have any existing Skype account, click on the 'Don't have a Skype Name?'
link to create a new one. Add-on Camera WVS1000 User manual 2. Software Setup Procedure 2.3 OVIZEE WVS1000 2.3.4 Fill in all the information to create a new Skype account for WVS1000. 2.3.5 When a valid Skype account was assigned to WVS1000, you may now check and adjust its online status. WVS1000
Add -on C amera Add -on C amera WVS1000 WVS1000 User manual Quickstart Guide 3. General Operations 3.1 Connect to WVS1000 a. Start Skype in your PC/notebook;
b. If your WVS1000 is powered up and connected to the Internet properly, you should be able to your WVS1000 online with its assigned skype name;
c. As making a normal skype voice/video call, click your WVS1000 on the left to select it and click the Call button or the Video Call button to make a skype call to WVS1000 as below;
d. Your WVS1000 should automatically answer your skype call and a life video will then stream to your Skype client from the Camera 1, which is the default camera to be selected automatically in each skype call-in);
e. You will get a welcome message Welcome to Ovizee Live!
from your WVS1000;
f. Also, you will get another message Cam1 is selected!!! from your WVS1000 to inform you that the Camera 1 is selected;
CameraSkypegateway Add -on C amera Add -on C amera Skypegateway WVS1000 Quickstart Guide User manual h. PandaVideo tries to interface to Skype and the following screen will show below:
Click Allow access to grant the access right to PandaVideo and it then minimizes in the system tray as below:
i. Whenever your PC/notebook is powered up, PandaVideo will automatically start;
j. Double-click the PandaVideo icon to maximize it as shown below:
Right now, you are ready to use WVS1000. CameraSkypegateway Add -on C amera WVS1000 User manual 3. General Operations 3.1.1 Status of button when a Skype Call is made to WVS1000 Cam 1 is active (current live video is streaming from camera1) Cams 2, 3, & 4 are inactive Dial out a skype call to the users WVS1000 through Skype App. Online status:
GREEN is online;
otherwise, it is oine CameraSkypegateway Add -on C amera WVS1000 User manual 3. General Operations 3.2 How to Add/Delete WVS1000 Accounts List out the users existing skype contacts and their online statues Click the button in the RED circle. The checkboxes are for selecting/unselecting the users WVS1000 accounts in his/her contact list.
(It supports at most 4 WVS1000 accounts.)
. For those WVS1000 that are not selected in the list, the button in the application will be disabled automatically. CameraWVS1000 Add -on C amera WVS1000 User manual 3. General Operations 3.3 How to select a cameras video source Cam1,2,3 are online here. Cam2 or Cam3 can be selected to be active for receiving its stream live video. The users WVS1000 will automatically switch to stream live video from Cam 2 or Cam3 if its button is pressed. Click the button in the RED circle. CameraSkypegateway Add -on C amera Skypegateway User manual 3. General Operations 3.4 How to pair a camera Click the button in the RED circle to enable Pairing Mode. Turn o the camera and turn on again. After 3 seconds, Click the button in the RED circle to select Cam4 for pairing. Cam4s green dot will ashing during pairing. After pairing is done, Cam4 will be selected as active. This indicate pairing is successful. CameraSkypegateway Add -on C amera WVS1000 User manual 3. General Operations 3.5 How to access the mute function Click the button in the RED circle to toggle the mute state ON/OFF. CameraSkypegateway Add -on C amera WVS1000 User manual Appendix A. If Ovizee WVS1000 is connected to the internet, Ovizee device icon will show up in the My Network Place. If this icon is not existed, please enable the Upnp service in the following:
Enable UPnP service in windows XP. Click Start, click Run, type appwiz.cpl, and then click OK. Click Add/Remove Windows Components. In the Components window, click Networking Services, and then click Details. Make sure Internet Gateway Device and UPnP User Interface are selected Add -on C amera WVS1000 User manual Follow the instructions that appear on the screen to complete the installation. Or, if you did not make any changes, close the Add or Remove Programs windows and Control Panel. Start the Services MMC snap-in. To do this, click Start, click Run, type services.msc, and then click OK. Locate SSDP Discovery Service in the list of services. If the status is not Started, double-click SSDP Discovery Service to open the SSDP Discovery Service Properties dialog box. In the Startup type box, click Automatic, and then click Start under Service status. Then, close the SSDP Discovery Services Properties dialog box. 2. Enable UPnP service in Windows Vista. Click on Start button, then select Control Panel. Click on Network and Internet link, and then click on Network and Sharing Center. You will see that network discovery is off. Click on the corresponding arrow button to expand the section. Click Turn on network discovery, and then click Apply. Administrator permission required. If you are prompted for an administrator password or confirmation, type the password or provide confirmation. Add-on Camera WVS1000 User manual Basic Setup I. Hardware Specication This section provides information of the specication for the product:
WVS1000 1. RJ45 10/100 Mbps Ethernet port for internet connection a) Support DHCP client and statics IP 2. Power On and Reset buttons 3. 6 LED indicator a) 1 for Skype status b) 1 for Power status c) 4 for Camera status Internal 64MB ash memory and 128MB RAM memory Internal ISM band 2.4GHz transceiver 4. 5. 6. SMA connector for changeable external 2.4Ghz antenna 7. Power Adapter: DC5V, 1000mA (Model: Helms-Man, SCB0501000P or Helms-Man, SHB0501000PE) SC880 internal ISM band 2.4GHz transceiver internal 2.4Ghz antenna 640 x 480 resolution image up to 15fps Built-in mic 9 x IR LED unit Power Adapter: DC5V, 1000mA 1. 2. 3. 4. 5. 6. Model:
Helms-Man, SHB0501000P 7.
(Model:TFL703048) Helms-Man, SCB0501000P or Battery: Li-Polymer rechargeable battery WARNING Do not use non-rechargeable batteries for the Parent Unit. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Add-on Camera WVS1000 User manual Software Features Summary Item Skype Clients Cameras Video Resolutions Video Codec Vi deo Bitrate Video Framerate Video Skype Call Audio Skype Call Conguration Description Skype 5.1 for Windows or later, Skype 5.0 Beta for Mac OS X or later Support up to 4 Wireless Cameras VGA (640x480), QVGA (320x480), QQVGA (160x240) H.264 Baseline Prole Dynamically Change According to the Network Bandwidth
(up to ~800 kbps) Dynamically Change According to the RF Link Bandwidth
(up to ~15 fps) One-Way Video Call (without audio) Not Support Web Based Conguration via Local Network Direct Device Access UPnP (for Web Based Conguration) Device Discovery Firmware Upgrade Via Web Based Conguration IP Assignment DHCP A. Popup Application Features Summary Item Skype Client Gateway Functions Description Skype 5.1 or later for Windows Support up to 4 Gateways Camera Selection Camera Pairing Video Playback/Record (To be provided) B. Web-Based Conguration Features Summary Item Browser Functions Description Internet Explorer 8.0 or later Firefox 3.6 or later Skype Account Sign-in/Sign-out Skype Account Status Change (Online, Invisible) Camera Pairing Welcome Message Customization Camera Name Customization TimeZone Setup Firmware Upgrade Factory Defaults Status Summary II. Add-on Camera WVS1000 User manual Disposal of the device (Environment) At the end of the product lifecycle, you should not dispose of this product with normal household waste, but take the product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, users guide and/or box indicates this. Some of the product materials can be re-used if you take them to a recycling point. By reusing some parts or raw materials from used products you make an important contribution to the protection of the environment. Please contact your local authorities in case you need more information on the collection points in your area. Dispose of the battery pack in an environmentally-friendly manner FCC and IC regulations FCC Part 15 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this device. To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The Baby unit shall be installed and used such that parts of the users body other than the hands are maintained at a distance of approximately 20 cm (8 inches) or more. This Class B digital apparatus complies with Canadian ICES-003. WARNING by the party responsible for compliance could void the users authority to operate the equipment. Industry Canada Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. RENSEIGNEMENTS RELATIFS AUX RGLEMENTS DE LA COMMISSION FDRALE DES COMMUNICATIONS FCC, ET DINDUSTRIE Canada IC Article 15 des rglements du FCC AVIS: Cet quipement a t test et sest rvel conforme aux limites dun appareil numrique de classe B, conformment la Section 15 du rglement de la Federal Communications Commission (FCC). Ces limites interfrence nuisible sur une installation rsidentielle. Cet appareil gnre, utilise et peut mettre des frquences radio et sil nest pas install selon les instructions, peut nuire aux radiocommunications. Toutefois, rien ne garantit que des parasites ne surviendront pas dans une installation particulire. Si cet appareil cause des interfrences nuisibles la rception du tlviseur ou de la radio, ce que vous pouvez dterminer en mettant votre appareil en et hors fonction, nous vous invitons essayer lune des mesures correctives suivantes :
- Rorientez lantenne de rception.
- loignez lappareil du composant qui reoit les ondes. du composant qui reoit les ondes.
- Au besoin, consultez votre marchand lectronique ou un technicien spcialis dans le service des radios/tlviseurs pour des suggestions supplmentaires. des parties responsables de lhomologation peut retirer lutilisateur son droit dutiliser lappareil. Cet appareil est conforme larticle 15 de la FCC. Le fonctionnement est soumis aux deux conditions suivantes: (1) Cet appareil ne doit pas causer dinterfrences nuisibles et; (2) Il doit pouvoir supporter les parasites quil reoit, incluant les parasites pouvant nuire son tre assure avec cet appareil. relatifs lnergie gnre par les frquences radio pouvant tre absorbe en toute scurit par un utilisateur ou par quelquun se trouvant proximit, dpendamment de lutilisation prvue du produit. Ce produit a t test et savre conforme aux normes de la FCC. Lunit du bb devra tre installe et utilise de manire ce que le corps de lutilisateur, lexception des mains, soit toujours une distance denviron 20 cm (8 po.) ou plus. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. AVERTISSEMENT autoris par la partie responsable de la conformit, pourrait annuler lautorisation donne lutilisateur dutiliser cet quipement. Industrie Canada Le fonctionnement est soumis aux deux conditions suivantes : (1) Cet appareil ne doit pas causer dinterfrences nuisibles et; (2) Cet appareil accepte toute les interfrences dont celles qui pourraient provoquer le fonctionnement involontaire de lappareil. Changes or modications to this equipment not expressly approved by the party responsible for compliance could void the users authorthority to operate the equipment. que les normes dIndustrie Canada ont t rencontres. Canada. Add -on C amera WVS1000 version 1.1