SAT-3500 SAT-3500 Hands-free Car Kit User manual onAclick inc. For Bluetooth Mobile Phone ENG P.5 FRA P.15 ESP P.25 www.sat-trac.com www.sat-trac.com onAclick inc. English Franais Espaol 5 15 25 Warning :
The manufacturer Parrot S.A. and its affiliates shall not be held liable towards End-Users or third parties for prejudice caused by misuse of the product, nor for use that would be in violation of local traffic regu-
lations and laws. Disclaimer :
The information in this document is subject to change without notice and does not represent a commitment on the part of vendor. No warranty or representation, either expressed or implied, is made with respect of quality, accuracy or fitness for any parti-
cular purpose of this document. Information in this document is subject to change without notice. Parrot reserves the right to change Product Specification and documentation at any time without notice. In no event will the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising out of the use or inability to use this product or docu-
mentation, even if advised of the possibility of such damages. This document contains materials protected by copyright. All rights are reserved. No part of this manual may be reproduced or transmitted in any for, by any means or for any purpose without express written consent. Product names appearing in this document are mentioned fot identification purposes only. All trademarks, product names appearing in this document are registered property of their respective owners. PTCRB Approved. FCC Compliance Statement (FCC ID: RKXCK 3500):
This device complies with part 2,15, 22 and 24 of the FCC rules. Statement according to FCC part 15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Statement according to FCC part 15.21 Modifications not expressly approved by this company could void the users authority to operate the equipment. Statement according to FCC part 15.105 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resi-
dential installation. This equipment generates, uses and can radiate radio fre-
quency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Declaration of Conformity:
SAT-3500 is a customized version of the Parrot CK3500. We, Parrot S.A. of 174 Quai de Jemmapes, 75010 Paris, France, declare under our sole responsibility that our product, SAT-3500, to which this declaration relates is in conformity with appropriate standards EN300328, EN301489-17, EN 60950 following the provision of Radio Equipment and Telecommunication Equipment directive 1995/5/EC with requirements covering EMC directive 89/336/EEC and Low Voltage directive 73/23/EEC. Bluetooth:
The Bluetooth trade mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Parrot S.A is under license. Other trademarks and trade names are those of their respective owners. Statment warning:
The external antennas used for this mobile transmitter must provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. EN English Users guide OUTLINE INTRODUCTION Bluetooth technology offers voice and data transmission via a short-distance radio link. It can link a wide range of wireless electronic equipment and expand the communication possibili-
ties of mobile telephones and numerous pieces of equipment. Based in Paris, founded in 1994 by Henri SEYDOUX, Parrot S.A is one of the fastest-growing companies. From the very beginning its specialties have been technologies associated with voice recognition and signal processing for telecoms and cars. The SAT-3500 Car Kit allows you to use your cellular phone while driving your car with the best of comfort and the best security possible. The names of your callers will appear on the screen. Your phonebook is accessible from the control screen. The voice command and the voice recognition allow you to keep your hands on the steering wheel. Your conversation is carried over the stereo speakers in your vehicle. Functionalities On the screen you can access your telephone phonebook. Caller name display. Voice recognition. Volume control. Mutes the in-car radio.
(- Requires mutable radio) Support call waiting. Pick-up and hang-up via voice command.
SAT-3500 Advanced Car Kit EN the power supply cable to the in-car radio. Connect the audio and supply bundles from the vehicle to the male connectors. If the in-car radio is equipped with a mute input, connect the yellow wire of the mute cable to one of the Mute in inputs 1, 2 or 3. In-car radio without ISO connectors You must obtain an ISO adapter cable Installation of the power supply cable The red wire of the power cable must be connected to the permanent 12V, the orange wire to the 12V and the black wire to the earth. Verify the electric wiring of the ISO supply bundle of the in-car radio. In some vehicles it is necessary to reverse the positions of the red and orange wires. This operation is simply done by reversing the fuse holders. If the user does not intend to operate the car at least once during any thirty day period, we do not recom-
mend connecting the orange wire to the permanent 12V, otherwise you risk causing the vehicle battery to go flat. Contents of the package LCD screen electronic box mute cable GSM & GPS Antennas Power cable microphone manual SAT-3500 MOUNTING Installation of the electronic box The SAT-3500 system is fitted with 4 outputs:
Input - in-car radio output LCD screen power micro-
phone. It is recommended to install all the cables before fixing the control box. Each cable supplied has a different connector to avoid wrong connections. The box must not be installed near the heating or the air-con-
ditioning. Ensure that it is not exposed to sunlight. Avoid installing it behind metal walls, which could alter the quality of the blue-
tooth link. Installation of the in-car radio cable The mute cable is equipped with black ISO connectors and with a line out output. In-car radio with line in inputs Preferably use this type of connection by joining the brown and green wires as well as the yellow wires of the mute to the back of your in-car radio. In-car radio with ISO connectors Disconnect the audio and supply bundles from the in-car radio Link the female connectors of the mute supply cables and of Users guide
CABLE DIAGRAM CONNECTION WIRING FOR ISO CARS Car kit Parrot, power cable Description White Mute In 1 Yellow Mute In 2 Blue Mute In 3 Orange + 12V Memory Pin Color Number 1 2 3 4 5 Green Not used 6 Brown Not used 7 Red + 12 V Permanent 8 Ground Black Car kit Parrot, cars speakers Description Pin Color Number Grey Rear right speaker +
1 White Rear right speaker -
2 Blue Front right speaker +
3 4 Green Front right speaker -
5 Red Front left speaker +
6 Orange Front left speaker -
7 Brown Rear left speaker +
8 Black Rear left speaker -
SAT-3500 Advanced Car Kit Installation of the microphone and the console Microphone:
The microphone must be aimed at the driver and can be installed:
Anywhere in the vehicle or the LCD screen. LCD screen:
Several accessories allow the screen to be installed in multiples sites in the body of the vehicle. Fastening on the dashboard Using the double-face tape provided. Just stick the display on a plane and clean spot on the dashboard. With a foot on the dashboard Once the display has been mounted on the foot provided in the packaging, stick this foot using the double-face tape on the dashboard. From then on, the screen becomes directional. A : LCD screen B : Foot C : Back support E : Iron screw ( 10mm ) D : Plastic screws (10mm ) Mounting Instructions
- Rotate B from the left to the right to screw B on A Only use the screws D.
- Insert the cable from the A through the hole on B
- Then, screw C on B. Only use the screw E Dont forget to insert the disc PAIR DEVICE AND FIRST USE During the initial charging, it is necessary to pair your mobile phone with the hands-free kit. EN Activate Bluetooth on your mobile Search for peripheral devices:
For more information, refer to the booklet on your telephone
( Pairing section ) Or visit www.sat-trac.com Home / Support /
Download Some telephones use Bluetooth in a WARNING particular manner. Verify in the the option in the menu. Preferences / Advanced Pref. / Pair Telephone menu if the model of your telephone is listed there. Then select Once it is detected, SAT-
3500 is displayed on your mobile phone. Enter the pairing code 1234. Pairing underway is displayed on the SAT-3500. Pairing complete is displayed on the screen, once pairing is success-
ful. The SAT-3500 then connects to your mobile phone. Once it is connected, the Bluetooth logo is displayed on the screen (except for mobile phones fitted with the Headset pro-
file). Access Profile service on your telephone, please refer to the GSM section of the If you want to utilize the Sim booklet SAP Users guide
For certain types refer to the page 12 pair a telephone With certain mobile phones, the name of your mobile, the battery level and the network are displayed on the screen. The menus are accessible from then on and the hands-free kit announces their name. From then you are connected to the hands-free kit and can use it for com-
municating. Call: Access your mobile phones phonebook. Receive a call: Press the green button of the hands-free kit to pick up the mobile phone. Hang up: Press the red button of the SAT-3500. Voice mail: Click on the scroll but-
ton while communicating. A menu appears and allows you to dial a digit. Return to the communication screen by selecting the arrow. Repeat function: Press the green key of the hands-free kit for several seconds to call the last number dialed. Communication volume: Adjust the communication volume by turning the scroll button. MENU The menu of the SAT-3500 is made up of the following head-
ings: phone book, call log, dial number, voice cmds, settings, SIM card, GPS. Phonebook Synchronization of your telephone index with the SAT-3500 is one of the innovative functions of this hands-free kit. This synchronization is automatic with numerous telephones. If this is not automatic, you have the option of transferring your telephone contacts to the kit via Bluetooth. Refer to the section Sending contacts via Bluetooth (or Object push) in your telephone user manual. Reception of contacts via Bluetooth is available for the Sony Ericsson P800/P900 and smartphones if pairing is done in the corresponding mode.
(refer to the ATTENTION section in the Pairing chapter) Once your contacts are transferred to the kit, you can access the voice recognition function available in the Voice com-
mands menu. Call from the phonebook You have the option of making a call from the menu index. Select phonebook Select a letter using the scroll button Confirm by pressing the scroll button Once the contact is selected:
The green button dials the number by default. The scroll button helps select from the different numbers of the contact. Press the green button to call. 10 SAT-3500 Advanced Car Kit Last calls This heading displays the list of calls and is divided into 3 sub-menus:
Missed calls / received calls / sent calls Select the desired contact Press the scroll button or the green button to redial. Dial a number Dial a number by turning the scroll but-
ton to the right or the left. Press the scroll button to select a char-
acter. The basket icon deletes the last charac-
ter. Once the number is dialled, press the green button to make the call. Voice commands This menu programs the voice recognition of the hands-free kit. It is divided into 3 sub-menus: index / key words / voice reco. selection. To attribute a voice print to a contact, select a letter:
Select the name by clicking on the scroll button. Once the name is selected, click on the scroll button to initiate the machine learning. Follow the instructions displayed on the screen. Once the voice imprint is attributed, a bubble is displayed to the right of the name. Keywords The keywords of the SAT-3500 are:
telephone, hang up, work, mobile, general, other and pre-
ferred. Telephone: Hangs up a call or activate voice recognition. Hang up: Terminates the communication. Work, mobile, general, other, preferred:
key words by telephone number. These key words help select the desired number when a contact comprises several words. The learning sequence is identical to that of the contacts. The key words must be recorded to be validated. Personalized substitutions of keywords are allowed. Selection of the type of voice recognition Recognition of the SAT-3500 is more complete than that of most mobile phones and works in a noisy environment. Reco. car-kit: voice prints registered in the memory of the hands-free kit. Reco. telephone: voice prints registered in the memory of the telephone. Make a call via voice recognition Press the green button, or say Telephone if the key word Telephone is registered. After the sound beep, pronounce the name of your contact. The SAT-3500 repeats the name in case of connection, and if not offers a second attempt following a beep. If the contact has a single telephone number, the SAT-3500 calls the partner number. If the contact has a single telephone number, the SAT-3500 calls the partner number. If the contact has several numbers and the key words per tele-
phone number are registered, the SAT-3500 proposes recog-
nizing the key word linked to the number after a beep. Users guide EN 11 SETTINGS This menu allows you to customize the SAT-3500. Paired devices List: You can access the list of peripheral devices which have been paired with the SAT-3500.You have the option of connecting, disconnect-
ing, or wiping from the your telephone memory. WARNING If you delete a device, all the voice imprints attributed to it will be deleted. Language Select the desired language. Confirm by clicking on the scroll button. If you select automatic , the hands-free kit synchronizes with the language of your SIM card (this option is available only on certain devices) Volume Voice Menus:
This option allows you to adjust the volume of the messages announced by the hands-free kit and voice imprints, which you have recorded. Rings and microphone:
These options let you adjust the volume of the ring and of the microphone. Telephone:
This option allows you to adjust the vol-
ume of the communication. Voice Menus This function activates or deactivates the voice assistant of the menus. The menus will be announced by the voice of the operator in the selected language. This option optimises the search for info from the interface dur-
ing driving. Display 3 headings allow you to personalise the display:
Contrast and brightness:
Use the scroll but-
ton for the desired level and validate by clicking on the latter. Zoom phonebook:
Lets you select the resolution of the displayed text in the phonebook and call logs menus. Select the 2-line or 3-line mode. Confirm by clicking on the scroll button. 12 SAT-3500 Advanced Car Kit EN Automatic response Activate/deactivate the automatic pick-up. Information Software version:
Version of the display software / Free memory. Hotline Our customer service is at your disposal. You can contact it via email or telephone. Connect to www.sat-trac.com for more information. Contact: usersupport@sat-trac.com or techsupport@sat-trac.com ADVANCED SETTINGS This menu gives access to the following headings:
Pairing a telephone, object push, software upgrade, demo mode. Pairing a telephone Some phones require a particular setting of your hands-free kit before pairing. ( for example SonyEricsson P900, PDA running Windows CE ) Select the input corresponding to your telephone, then pair your device when the SAT-3500 displays Pair your telephone. Object push Some telephones can require a particular setting of your hands-free kit before sending contacts. ( If your telephone does not display your kit in the list of devices to which contacts can be sent, activate the Always active option.) Warning: this configuration of your kit can cause poor func-
tioning with certain telephones. We recommend that you return to Automatic mode as soon as you have sent your contacts. Software upgrade Activate this option when you install an upgrade by Bluetooth of your kit, from a personal computer. This option will be auto-
matically disactivated when restarting your kit. Go to our website for more information : www.sat-trac.com Demo mode Launch a demo of the hands-free kit. Restarting the carkit is necessary to deactivate this mode. GPS SAT-3500 The SAT-3500 kits load a GPS (Global Positioning System) module giving access to the current position of the vehicle. This information is available via Bluetooth on a channel accessible by the majority of PDAs and Smartphones. Connection to the GPS service If you have a navigation application on your PDA or smart-
phone, all you need do is pair this periph-
eral device with the SAT-3500, and open a series connection to the GPS port. Certain navigation applications let you directly select as Bluetooth GPS source. On your device the GPS configuration to be selected is NMEA 0183v2 9600, in the event it is necessary to supply this information. Once connected, a GPS icon is visible on the screen of the SAT-3500. Users guide 13 Voice indications of your navigation Once the GPS service is connected the SAT-3500 equipped with GPS module allowsyou to listen to the sound indications of your navigation software over the car speakers of your vehicle. Your navigation will thus be car-
ried out under optimal conditions (this functionality is available only with certain navigation software). To do this, from your PDA or smartphone open the service Ear phone/Headset, which is available on the car-kit. If you want to make a call or answer an incoming call, this service is automatically closed then reopened to allow you to use telephony functionality under the best conditions. GPS Menu In this heading you can fully disable the GPS service to pre-
vent anyone from connecting to this service. The Information section specifies the GPS configuration and the peripheral device currently connected to this service if it is active GSM OFFBOARD SAT-3500 The SAT-3500 loads a class 8/10 GSM/GPRS module. The presence of this module let you use the SIM Access Profile
(SAP) of your telephone or even use your SAT-3500 directly as a car phone, without Bluetooth telephone, with only a physical SIM card, it also lets you use your kit as Internet access point by using the GPRS. The SIM Access Profile (SAP) allows the information on your personal SIM Card to be used by Bluetooth. You thus benefit from the GSM antenna of the SAT-3500 and you save on the battery in your Bluetooth telephone. Pairing For safety reasons, the pairing procedure of a SAP telephone is different. You must select the SIM Access Phone section in the Preferences / Advanced Pref. / Pair Telephone menu. A 16-digit code is displayed on the screen of the SAT-3500, which is the link code to be captured on your SAP telephone. If the SAT-3500 requires the PIN code of your personal SIM card, it will ask you to enter it. Functioning The SIM Access mode is activated by default if your telephone supports it. The SAT-3500 will use this mode as soon as your telephone is detected by maintaining continuity of service. The functioning of the interface is the same as for Bluetooth telephony. The SIM Card heading This heading allows you to insert/modify the PIN code of your personal SIM card or to deactivate the SIM Access Profile mode. 14 SAT-3500 Advanced Car Kit