http://www.esmartlock.com ESMART ULTRA SETUP MANUAL
(AP200_Ethernet Setting) 2012/9/9 1-1. AP200 TEST 1. AP200 TEST & SETUP DC JACK DC JACK D-SUB 9P
(FEMALE) RJ11 RJ11 e-Smart Lock DIP SWITCH POWER/COM
(RJ11) ETHERNETR
(RJ45)
[ POWER/COM CABLE ]
[ POWER CABLE ]
[ AP200 TERMINAL ]
DC PLUG USB USB D-SUB 9P
(MALE)
[ DC POWER ADAPTOR -12V ]
[ USB TO 232 CABLE ]
[ LAN CABLE_CROSS ]
Page 2 1-2. AP200 TEST D-SUB 9P DC JACK
(FEMALE)2. AP200 TEST ETHERNET RS 232
[ DIRECT LAN CABLE ]
[ USB TO 232 CABLE ]
DC 12V PC (SERVER or CLIENT)
[ DC ADAPTOR_12V ]
[ AP200 ]
e-Smart Lock ON
(RED LED ON) RESET
( ) Page 3 1-3. AP200 TEST 2. AP200 TEST e-Smart Lock
: PC USB USB TO 232 CABLE , PC COM PORT NO.
, 1) USB TO 232 CABLE D-SUB 9P DC JACK
(FEMA E)
(FEMALE) 2) POWER/COM CABLE
: USB TO 232 CABLE D-SUB 9P(MALE) POWER/COM CABLE(FEMALE) . 3) DC ADAPTOR-5V
: DC ADAPTOR -5V DC PLUG POWER/COM CABLE DC JACK . 4) DIRECT LAN CABLE
: PC ETHERNET PORT AP200 TERMINAL ETHERNET PORT(RJ45) . 5) AP200 TERMINAL
: POWER/COM CABLE RJ11 AP TERMINAL RJ11 . (LED RED ON)
( : RJ45 ) 6) DIP SWITCH (AP TERMINAL) 6) DIP SWITCH (AP TERMINAL)
(1) WIFI & AP SETUP MODE
: 4(ON) / 1,2,3,5,6(OFF) WIFI AP SETUP
(2) WIFI OPERATION MODE
: 1(ON) / 2,3,4,5,6(OFF) AP SERVER WIFI
(3) ETHERNET OPERATION MODE
: 2(ON) / 1,3,4,5,6(OFF) AP SERVER ETHERNET ON ON OFF
(4) DEBUG MODE
: 3(ON) / 1,2,4,5,6, (OFF) AP200 TERMINAL
< DIP SWITCH >
< DIP SWITCH >
Page 4 2-1. AP200 ETHERNET TEST e-Smart Lock 1. 1) 1-2 2) AP200 DIP SWITCH 1,2,3,4,5,6 OFF .
2. ETHERNET 1) : PC [ X ]
2) : PC [ ! ]
2) : PC [ ! ]
3. AP200 ETHERNET MODULE 1) PC [ ! ]
2) WIZ100SR CONFIG TOOL 3.0.2 3) CONFIG TOOL [SEARCH]
4) MAC ADDRESS & IP ADDRESS
- DISPLAY
( DISPLAY )
[ WIZ100SR CONFIG TOOL 3 0 2 ]
[ WIZ100SR CONFIG TOOL 3.0.2 ]
Page 5 2-2. AP200 ETHERNET TEST e-Smart Lock 4. PC IP Address & Subnet Mask ( ) 1) PC COMMAND WINDOW [ CMD ] [ ] . 2) [ ipconfig ]
3) Enter AP Adress & Subnet Mask
) 5. AP200 IP Address & Subnet Mask ( ) 1) WIZ100SR CONFIG TOOL 3.0.2 . 2) [ SEARCH ]
3) AP200 Local IP & Subnet
& S
- Local IP : PC IP Address (EX : 192.168.0.134)
- Subnet Mask : PC Subnet Mask (EX:255.255.0.0)
- PORT : [ 5000 ]
4) Operation Mode : [ Mixed ]
5) [ Setting ]
PC [ ! ]
[ PC IP Adress & Subnet Mask ]
[ AP200 IP Adress & Subnet ]
Page 6 2-3. AP200 ETHERNET TEST e-Smart Lock
7. AP200 1) 1-3 2) AP200 DIP SWITCH 2,3 ON 1,4,5,6 OFF . 3) AP200 : 5V DC JACK or RESET 3) AP200 : 5V DC JACK or RESET 4) : [ ! ]
8. Device Terminal V1.0 TEST (AP200 ) 1) Device Terminal V1.0 . 2) Serial Communication
: Serial Config [Open]
Serial Port : USB TO 232 CABLE Serial Port Baud Rate : 115200 Data Bit : 8BIT / Stop Bit : 1 / Parity : None / Flow Control : None 3) Network Communition
: Network Config [ Connect ]
: Network Config [ Connect ]
IP Address : AP200 ETHERNET IP ADDRESS PORT : AP200 PORT 4) AP200 Network Communication [1234]
Network Communication [1234]
[Send] Serial Communition Window [1234]
: 1234
( DISPLAY ) 1234
[ Device Terminal V1 0 ]
[ Device Terminal V1.0 ]
Page 7 3-1. SERVER & AP200 TEST e-Smart Lock 1. SERVER & AP200 TEST DC JACK D-SUB 9P
(FEMALE) ETHERNET ETHERNET RS 232
[ USB TO 232 CABLE ]
PC (SERVER or CLIENT) DC 12V
[ AP200 ]
[ DC ADAPTOR_12V ]
Page 8 3-2. SERVER & AP200 TEST e-Smart Lock 1. SERVER PC TCP/IP 1) 3-1 . 2) PC COMMAND WINDOW [ CMD ] [ ] . 3) [ ipconfig ]
4) Enter AP Address & Subnet Mask EX>
- IP Address : 192.168.0.7
- Subnet Mask : 255.255.255.0
- Gateway : 192.168.0.1 Page 9 3-3. SERVER & AP200 TEST e-Smart Lock 2. AP200 ETHERNET_ Network 1) AP200 : DIP Switch 1,2,3,4,5,6 (OFF) 2) WIZ100SR Config Tool 3) [Search] : LAN AP200 ETHERNET MODULE
, Board List Mac Address 4) Enable Serial Debuge Mode : [ V ] . 5) Board List : AP200 Ethernet Module (WIZ00SR) MAC Address 5) Board List : AP200 Ethernet Module (WIZ00SR) MAC Address 6) IP Config Method : [ Static ]
7) Ethernet Module (WIZ100SR) Network
- Local IP/Port : WIZ100SR IP Address Port
- Subnet : WIZ100SR Subnet Mask
- Gateway : WIZ100SR Gateway Address
< NETWORK >
Local IP, Subnet Mask, Gateway ,
. IP
. 8) Server IP/Port : Server PC IP Address IP Address & Port
- Server IP : 192.168.0.17
- Port : 2274 9) Operation Mode : [ Client ] , WIZ100SR TCP TCP , 10) [Setting] : Network Config Page 10 3-4. SERVER & AP200 TEST e-Smart Lock
< SERIAL >
< SERIAL >
< OPTION >
3. AP200 ETHERNET_ Serial 1) [Search] : LAN AP200 ETHERNET MODULE
. Board List Mac Address 2) Serial Config 2) Serial Config
- Speed : 115200
- Databit : 8
- Parity : None
- Stop Bit : 1
- Flow : None 3) [Setting] : Serial Config 4. AP200 ETHERNET_ Option 1) [Search] : LAN AP200 ETHERNET MODULE
. Board List Mac Address 2) Data Packing Condition
- Time : 50 [ms]
- Size : 0
- Char : 0 Char : 0 3) [Setting] : Option Page 11 3-5. SERVER & AP200 TEST e-Smart Lock 5. AP200 TERMINAL (AP SETTING) DC JACK D-SUB 9P
(FEMALE)
<1>
1) AP TERMINAL DIP SWITCH : 4(ON) / 1,2,3,5,6 (OFF) 2) AP200 TERMINAL : 5V DC PLUG or RESET
<2>
3) FC200 <1 _AP MANAGEMENT>
4) SETUP COM PORT <2 >
- BAUD RATE : 115200
- PARITY BIT : NONE
- STOP BIT : 1
5) AP SETTING
- Group ID : AP200 TERMINAL ID (EX:AP01)
- RF Channel : RF 11CH ~ 25CH (15 CHANNEL)
2CH
2CH
- Locker Range : RF Locker
- AP MAC : AP200 Mac address 6) WRITE : AP
) 7) READ : AP 8) EXIT :
Page 12 3-6. SERVER & AP200 TEST e-Smart Lock 6. PT ONLINE SERVER DC JACK D-SUB 9P
(FEMALE) 1) AP200 TERMINAL DIP SWITCH : 2(ON) / 1 3 4 5 6 (OFF) 1) AP200 TERMINAL DIP SWITCH : 2(ON) / 1,3,4,5,6 (OFF) 2) AP200 TERMINAL : 5V DC PLUG or RESET 3) PT_Online Server 4) Server IP/Port (3-2 )
- Server IP : 192.168.0.71
- Port : 2274 5) [St AP200 5) [Start] : Server AP200 t] S 6) : Server AP200 Page 13 3-7. SERVER & AP200 TEST e-Smart Lock 7. ONLINE Lock Client DC JACK D-SUB 9P
(FEMALE) 1) ONLINE Lock Client 2) [ AP SETTING ] : AP200 3) : Server AP200 Page 14 4-1. E-SMART ULTRA SETUP e-Smart Lock 1. E-SMART ULTRA D-SUB 9P
(FEMALE) DC JACK ETHERNET ETHERNET or WIFI ETHERNET or WIFI WIFI PC (SERVER) PC (CLIENT)
[ POWER CABLE ]
[ AP200_ A~Z ]
[ DC ADAPTOR_12V ]
2.4G LOCK
(A~Z)
) Page 15 4-2. E-SMART ULTRA SETUP e-Smart Lock 2. SERVER PC TCP/IP 1) 4-1 . 2) PC COMMAND WINDOW [ CMD ] [ ] . 3) [ ipconfig ]
3) [ ipconfig ]
4) Enter AP Address & Subnet Mask EX>
- IP Address : 192.168.0.7 Subnet Mask : 255 255 255 0
- Subnet Mask : 255.255.255.0
- Gateway : 192.168.0.1 3. AP200 Online Program 1) AP200 NETWORK 4-1 ETHERNET NETWORK
: WIZ100SR CONFIG TOOL (3-3 ~ 3-4) Local IP, Subnet Mask, Gateway ,
. IP
. 2) AP200 : 3-5 3) Online Program PT_Online Server : 3-6 O li t 3 7 Online Lock Client : 3-7
( Online Lock Client ) L k Cli Page 16 FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected. Consult the dealer or an experienced radio/TV technician for help. Caution Modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation IMPORTANT NOTE:
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The antennas used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this equipment near water. 6) Do not using near any heat sources such as radiators, heat resisters, stove, or other equipment that produce heat. European CE notice to users and product statements This product is CE marked according to the provisions of the R&TTE Directive(99/5/EC). Hereby, PASSTECH CO., Ltd. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For further information, please contact http:// www.esmartlock.com PASSTECH CO., Ltd. No. 1305, Kranz Techno, 388, Dunchon-daero, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea Tel: +82-31-743-7277 / Fax: +82-31-743-7276 URL: www.esmartlock.com CONTACT INFORMATION Manufacturer Address : No. 1305, Kranz Techno, 388, Dunchon-daero, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea To locate in-country PASSTECH CO., Ltd., distributors of the ACCESS POINT please refer to the PASSTECH CO., Ltd. Website http://www. www.esmartlock.com These distributor(s) represent local contacts for this product. CORPORATE HEADQUARTERS:
PASSTECH CO., Ltd. No. 1305, Kranz Techno, 388, Dunchon-daero, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea Tel: +82-31-743-7277 Fax: +82-31-743-7276 Web: http:// www.esmartlock.com This device complies with Industry Canada license-exempt RSS standard(s). Operation is Subject to the following two condition: (1) this device may not cause interference
,and (2) this device must accept any interference, including interference that may cause undesired operation of the device. EUROPEAN UNION DECLARATION OF CONFORMITY DECLARATION OF CONFORMITY PASSTECH CO., Ltd. No. 1305, Kranz Techno, 388, Dunchon-daero, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea declare under our sole responsibility that the product(s) ACCESS POINT AP200 to which this declaration relate(s) is in conformance with the following standards:
EN 301 489-1 V1.9.2:2011 EN 301 489-17 V2.2.1 :2012 EN60950-1:2006 EN 300 328 V1.7.1:2006 following the provisions of the 1999/5/EC Directives.