FCC ID: W6YFX100 FURNITURE LOCK

by: PASSTECH CO., LTD latest update: 2021-05-27 model: FX100

Two grants have been issued under this FCC ID on 05/27/2021 (this is one of seven releases in 2021 for this grantee). Public details available include internal & external photos, manuals, and frequency information. some products also feature user submitted or linked instructions, drivers, warrantee terms, password defaults, & troubleshooting guides.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Trade-in? Recycling locations

eg for Slack usage

all	frequencies						exhibits	applications
		manuals		photos		label

all exhibits 18
1 ~ 2021-05-27 16
2 ~ 2021-05-27 17

app s				submitted / available
1 2	User Manual Rev.01	Users Manual	pdf	545.29 KiB	May 27 2021 / November 23 2021	delayed release
1 2	User Manual FX200 Rev.01	Users Manual	pdf	571.90 KiB	May 27 2021 / November 23 2021	delayed release
1 2	Internal Photos	Internal Photos	pdf	666.51 KiB	May 27 2021 / November 23 2021	delayed release
1 2	External Photos	External Photos	pdf	206.84 KiB	May 27 2021 / November 23 2021	delayed release
1 2	Label Info	ID Label/Location Info	pdf	186.92 KiB	May 27 2021
1 2	Agent Authorization Letter	Cover Letter(s)	pdf	146.36 KiB	May 27 2021
1 2	Antenna Spec	Operational Description	pdf		May 27 2021	confidential
1 2	Block Diagram	Block Diagram	pdf		May 27 2021	confidential
1 2	Confidentiality Request Letter	Cover Letter(s)	pdf	151.07 KiB	May 27 2021
1 2	MPE Test Report	RF Exposure Info	pdf	327.95 KiB	May 27 2021
1 2	NFC Test Report	Test Report	pdf	3.48 MiB	May 27 2021
1 2	Operational Description	Operational Description	pdf		May 27 2021	confidential
1 2	Part List	Parts List/Tune Up Info	pdf		May 27 2021	confidential
1 2	Schematics	Schematics	pdf		May 27 2021	confidential
1 2	Test Setup Photo	Test Setup Photos	pdf	3.21 MiB	May 27 2021 / November 23 2021	delayed release
1 2	Product Differences Description	Cover Letter(s)	pdf	456.95 KiB	May 27 2021
1 2	BT LE Test Report	Test Report	pdf	2.58 MiB	May 27 2021
1 2	Zigbee Test Report	Test Report	pdf	1.52 MiB	May 27 2021

exhibit
download
text

1 2

User Manual Rev.01

Users Manual

pdf

545.29 KiB

May 27 2021 / November 23 2021

delayed release

USER GUIDE Furniture Lock

(MODEL : FX100) Passtech Co., Ltd. Copyright 2017 Passtech Inc. All rights reserved. You are strictly prohibited to copy, disclose, distribute, or use this document in part or as a whole for any purposes other than those for which this document is disclosed. This document is copyrighted and contains confidential information and other intellectual property rights of Passtech Inc. Any unauthorized use, copy, disclosure or distribution constitutes infringement of Passtechs intellectual property rights. FX100 User Guide Passtech Inc. reserves the right to make changes to its applications or services or to discontinue any application or service at any time without notice. Passtech provides customer assistance in various technical areas, but does not have full access to data concerning the use and applications of customer's products. Therefore, Passtech assumes no liability and is not responsible for customer applications or software design or performance relating to systems or applications incorporating Passtech products. In addition, Passtech assumes no liability and is not responsible for infringement of patents and/or any other intellectual or industrial property rights of third parties, which may result from assistance provided by Passtech. Composition of the information in this manual has been done to the best of our knowledge. Passtech does not guarantee the correctness and completeness of the details given in this manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since, despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips. We have our development center in South Korea to provide technical support. For any technical assistance can contact our technical support team as below;

E-mail: passtech@esmartlock.com Version 1.0 2 http://www.esmartlock.com FX100 User Guide Table of Contents 1. Understanding FX100 FURNITURE LOCK ............................ 4 1.1 What is FX100 FURNITURE LOCK? ................................................. 4 1.2 Operating cards .................................................................................. 4 2. Types of Lock Operating Scenario ........................................ 5 2.1 Free Selection (Shared Use) ................................................................ 5 2.2 Assigned Mode (Permanent Use) ......................................................... 5 2.3 Smart Assign mode (Shared or permanent use) ................................... 5 3. Lock Operation ....................................................................... 6 3.1 RF tag uses .......................................................................................... 6 3.2 Assigned Mode ................................................................................... 6 3.2.1 Open & Close by RF card key.............................................................................. 6 3.2.2 Open & Close by smartphone .............................................................................. 6 3.3 Free Selection Mode .......................................................................... 8 3.3.1 Open & Close by RF card key.............................................................................. 8 3.3.2 Open & Close by Smartphone ............................................................................. 8 3.4 Open in Emergency ............................................................................ 9 3.5 Low Battery warning and battery change ........................................... 9 4. Card Operation ..................................................................... 11 4.1 Owner Card ....................................................................................... 11 4.2 Master Card....................................................................................... 11 4.2.1 Functions of the Master Card I & II .................................................................. 11 4.2.2 Replacing old Master cards with New Master cards ....................................... 11 4.3 User Card ......................................................................................... 12 4.3.1 Free Selection (Shared Use) ...........................................................................12 4.3.2 Assigned Mode (Permanent Use) ...................................................................13 4.3.3 Replacing old User card with New User card ..................................................13 4.4 Maintenance card ............................................................................. 13 4.5 Audit Trail card ................................................................................. 14 4.6 Lock Info card ................................................................................... 14 5. Indication Instruction ........................................................... 15 6. Specification ......................................................................... 15 ANNEX A Beep & LED Table .................................................... 16 7 Regulatory Statement ........................................................... 18 Version 1.0 3 http://www.esmartlock.com FX100 User Guide 1. Understanding FX100 FURNITURE LOCK 1.1 What is FX100 FURNITURE LOCK?

- FX100 locker locks are the locker lock operated by either13,56 MHz RF Card Key.

- FX100 can work as both offline (standalone) or online mode.

- To set FX100 as online system, additional peripherals such as Access point, Server and client software are necessary. 1.2 Operating cards Refer Esmart Ultra client user manual for online lock system setup. Card Name Description Key card Setup card Master I card Security Key value to be loaded to locks at scanning. Then, the locks will accept only the RFID cards which have the same security key value. Lock will be programmed with various options at scanning. Setup card can be set from Lock Installation Software (LIS). All locks will be open at scanning. User card registration in the lock will be deleted and the lock will be ready to accept new user card. Locks will be open or close without User card registration deletion. Master II card Useful when user needs to open lock temporarily. Card type Mifare 1KB Master cards registration to be deleted at scanning this card on locks. After Owner card scanning on lock, scan new master cards to register to the lock. Lock to be programmed with various options at scanning as you set. Time, Master cards registration, Master code, etc can be updated without changing lock ID. Latest 150 event history to be collected at scanning. Owner card Maintenance card Audit trail card Card number, event type (open & close), time of event, user name, etc to be collected. Various information of lock can be collected into this card. Mifare 4KB Lock info One Lock info card can collect information from up to 40 locks. card Lock ID, Operation mode, Battery status, software version, time, auto opening and more to be collected.

*****This furniture lock system is using in Hotel, Office and any place which is without residential area. Version 1.0 4 http://www.esmartlock.com FX100 User Guide 2. Types of Lock Operating Scenario FX100 locker locks are designed to work for the various operation requirements by simple set up process. Following operation modes can be programmed before or after lock installation. 2.1 Free Selection (Shared Use)

- User card is not assigned to any certain lock but User is free to select any empty locker to occupy.

- Programmable to make LED lamp blinked to represent locker is in use. (In-use lamp)

- Programmable to use multiple lockers (up to 5) with one User card. (Multi-lock)

- Programmable for Time based operation. 2.2 Assigned Mode (Permanent Use)

- Each locker is assigned to each User card in advance.

- Programmable to use multiple lockers (up to 5) with one User card. (Multi-lock)

- Also, programmable for multiple user cards (up to 8) to one locker. (Multi-user) 2.3 Smart Assign mode (Shared or permanent use)

- User can select any empty locker and the user is assigned to the chosen locker.

- Without the help of administrator, user can freely change the assigned locker to any empty locker.

- Programmable to make LED lamp blinked to represent locker in use.

- Programmable to set specific time to release the assigned locker to empty locker after the changing the locker. Version 1.0 5 http://www.esmartlock.com FX100 User Guide 3. Lock Operation 3.1 RF tag uses FX100 can be set with two different credential acceptance modes. RF tag mode accepts RF tag These modes can be set from Maintenance card (or setup card)

[RF tag only]

3.2 Assigned Mode 3.2.1 Open & Close by RF card key RF card key can be used anytime. Touch the lock + Put User Card on the Lock. 3.2.2 Open & Close by smartphone

(1) How it works card.

- Visitor receives RFID user card at the front desk and goes to the locker assigned to this

- Then he downloads Passtech Mobile App from Google play store and install it into his smartphone and then wakes up the lock with the user card and registers himself directly into the mobile App. Version 1.0 6 http://www.esmartlock.com FX100 User Guide

- From that time on, the lock can be operated through a smartphone.

- Mobile access key expires as soon as the user card is no more valid.

- Thus, the smartphone is fully synchronized with RF user card.

(2) Setting up the lock and user card issue Since BLE mobile access key is fully synchronized with RF user card, the first step is to set up the locker lock with set up card in Assigned mode and issue the user card and assign it to the locker. To do so, please refer to the Lock Management System User Guide.

To register via the Mobile App, follow the instructions that will appear on your mobile device screen. The instructions are like

- Scan your user card on the lock.

- To enter registration mode, touch the lock (the registration modes on when the locks LED is blinking)

- Touch the Register button below. Now, when registration is done, your mobile key in your smartphone is fully synchronised with the user card and ready to operate the lock. It means that the information from the user card corresponds with that of the mobile key, including the validity period. Thus, the information about the valid date will automatically appear on the mobile device screen. The registration is a one-time process, so you dont need to do it more than once for one locker. To open the locker, press the Lock icon button on your mobile device monitor. Version 1.0 7 http://www.esmartlock.com FX100 User Guide

(4) Multi-user and multi-locker There are four operation scenarios for BLE mobile access locking solution. An unlimited number of mobile devices can be assigned to one locker by syncing up with a card, but one mobile device can have only one card assigned, whereas one phone can operate up to 5 locker locks at the same time if its RF card have 5 locks assigned.

(5) Access Log Log in the Menu bar. To check the history of the mobile access key, visit the Access 3.3 Free Selection Mode 3.3.1 Open & Close by RF card key Touch the lock + Put User card on the lock. 3.3.2 Open & Close by Smartphone

(4) How it works Download Passtech Mobile App from Google play store and install it into his smartphone After running the App, choose Free mode on the setting tab. Then, you can freely choose any available lock to operate. Version 1.0 8 http://www.esmartlock.com FX100 User Guide To access your mobile device, please set your lock for CSN Free mode and change the usage mode to Free mode from the Passtech APP from your mobile device. 3.4 Open in Emergency In case User loses user card, Operator can open the lock by Master Card I. Master card can be set by Set up Card. Once Master card I is used to open the lock, the lock reverts to default position User Card ID will be erased from the lock if Master Card I has the function to delete the When the lock stops working due to low battery, lock can be opened by external User ID. emergency battery pack. 3.5 Low Battery warning and battery change The RFID lock uses 1 pieces of CR123A batteries (3V).

(1) When battery reaches to low voltage ;

Beep sounds five times. Red LED lights Low battery is recorded in the memory of the User Card (Operator can know the low battery of the lock when the card is read at operators Program).

(2) Changing battery Open the battery case at main case. Replace with new batteries.. When you pull out the battery, and if you do not insert the batteries in 3 minute, the clock of the lock returns to default time.( 1st. Jan, 2010 ) Please use Maintenance card to set the time of the lock.

(For setting of Maintenance card, please refer to LOS (Locker Operation System) User Manual or Esmart ultra client user manual. Version 1.0 9 http://www.esmartlock.com FX100 User Guide CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Version 1.0 http://www.esmartlock.com 10 FX100 User Guide 4. Card Operation 4.1 Owner Card The role of the Owner card is to delete the Master card registration. Therefore, Owner card will be used to delete current master card registration in the lock, and make the lock to be ready to register new Master Card. It is simple to delete the Master card registration and to register new master card in the lock :

Put the Owner card to the lock until lock sounds beep (one time) and red lamp lights. Now, all Master card registration is deleted from the lock. After Owner card scanned, put new master cards to register to the lock 4.2 Master Card 4.2.1 Functions of the Master Card I & II There are two types of Master cards. Master card I : Alarm Off, Locker open and User card deletion. Useful card at user card lost. After Master card I scanned on a lock, the lock is ready to accept new user card. Master Card II : Alarm Off and Locker open and close. Useful card for temporary lock open or close. Previous user card is still assigned to the lock. Maximum five Master cards can be registered in a lock. 4.2.2 Replacing old Master cards with New Master cards There are two ways to delete the lost Master card and register new Master card in the lock.

(1) Using Maintenance Card Read the master cards (all Master cards to be used in a lock) to register in each lock at Maintenance menu in LOS program (or online client program). Put the Maintenance card to the reader, and download the master card chip numbers Version 1.0 http://www.esmartlock.com 11 FX100 User Guide to the Card. Put the Maintenance card to the locks, then, new Master cards will be registered to the lock, and lost master card will be blocked.

(2) Using Owner Card Delete the old master card registrations in the lock (refer to the 4.1) with Owner Card. Put new master cards to each lock so as to register new master cards. Then, old master card you lost will not be used. All existing Master cards needs to be registered again together with new Master card because all master card registrations were deleted if Owner card is used. The initial status of the lock in Free Selection mode is open (Latch is inside). 4.3 User Card 4.3.1 Free Selection (Shared Use)

(1) Initial Use Select the empty locker. Put your belongings in the locker. Touch to wake up the lock, and place your card (or any form of user key) to the front body of the lock. Wait until the Green LED lights and Beep sounds once. Latch will move out, and lock is closed. Close the door. The lock will be remained at locking state.

(2) Open the lock Touch to wake up the lock. Put your user card to the front body of the lock. Lock will check the lock ID and key of the user card (or any form of user key). Lock will emit Green LED and beep sound once it is right user card. Latch will be moved and locker will open. User information will be erased from the lock so that new user can use the empty lock. In free selection mode, lock and card need to read and write the each others information. So please do not sway the card until the latch is moved. Version 1.0 http://www.esmartlock.com 12 FX100 User Guide 4.3.2 Assigned Mode (Permanent Use) The initial status of the lock in Assigned Mode is closed status (latch out) Touch to wake up the lock. Put the User Card to the front body of the assigned lock. Lock checks the card, if the key of the user card is correct, Lock will emit green LED lights and beep sound once. Then, lock will be opened, and closed again in 5 seconds. To close the locker, just close the door. Lock will remain the closed status. 4.3.3 Replacing old User card with New User card

(1) Free Selection be accepted.

(2) Assigned Mode lock. Issue new user card by LOS (Locker Operation System) program. In case the locker is closed, put Master Card to the lock to open the lock. Put new User card to the lock, then lock will accept new User card, and missing card will not In case the locker is opened, just put the new user card to the lock, and the lock will register this new user card key. Old User key will not be accepted. Issue new User card (with assigned locker Number) for Assigned mode. Put Master Card to the lock to delete the old user card, and put the new User card to the Lock will accept the new user card only, and old user card registration will be deleted. In case the lock is set for multiple users, lock revision should be updated when new user card is issued by LOS program. Then, Lock updates its revision number when new user card is scanned. The other user cards which are assigned to this locker also needs to be reissued with updated lock revision by LOS program. 4.4 Maintenance card Program Maintenance card as you want from LOS (or online client software) Put Maintenance card to each lock, lock will be set as you programmed in step 1. Time of the lock, Master cards change, Wireless online channel, Auto status update, etc can be updated with Maintenance card Version 1.0 http://www.esmartlock.com 13 FX100 User Guide 4.5 Audit Trail card Put Audit Trail Card to the lock. melody is on. 4.6 Lock Info card The latest event data (up to 150 events) will be downloaded from lock to the Card. Wait until Read the Card at LOS program, and 150 event data will be saved to the PC. Put Lock info Card to the lock. collect up to 40 locks. Various lock information data will be downloaded from locks to the Card. One card can Read the Card at LOS program, and all data will be saved to the PC. Lock ID, operation mode, Battery status, time, auto opening setting status, RF channel and more will be indicated. For further information about all system cards and how to issue, refer to LMS / LOS or Esmart ultra client manual. Version 1.0 http://www.esmartlock.com 14 5. Indication Instruction FX100 User Guide 1) 2) 3) 4) Open/CloseGREEN LED on for 0.2 second, one beep sound for 0.2 second. Successful programmingMelody. Indicate for mistakeRED LED flashes 3 times, 3 beep sounds Low voltageRED LED blinks 5 times, and beep sounds 5 times. 6. Specification Item Detail Material Polycarbonate Communication 2.4Ghz Zigbee(ONLINE COMUNICATION) BLE AES128 Power Supply 3V DC(CR123A) Battery RFID CARD, Wireless Control Security Open/Close RFID Indicator Dimension Mifare Classic & Desfire at default, ISO14443 Type A Buzzer Front) 35.25mm*64.50mm*6mm Back) 71.75mm*71.75mm*25mm Operation TEMP 0 ~ 50 Battery life Certification 1.5year(online), 2year(standalone) CE, FCC Version 1.0 http://www.esmartlock.com 15 FX100 User Guide ANNEX A Beep & LED Table Beep LED Description 1 x short beep 1 x Green(2sec) OK 2 x short beep 3 x short beep 1 x Red(2sec) Operation Error 1 x Red & Green in Time over turn(2sec) Do-Re-Mi Melody 1 x Red & Green in Successful Set up / mode turn(2sec) change / Time setting 5 x short beep 5 x Red & Green Low battery Do-Re-Mi Melody 2 x Red & Green Successful connection 1 x short beep 1 x Green Off the Alarm by Control Melody 1 x Green Successful registration of No Beep Both Green and Red LED 1) Owner Card is not blinks registered. No Beep Red on/off Owner card is registered, No Beep Green on/off Owner & Master card are between front and back bodies. card Owner Card/ Master Card 2) In case of Shift or Week-

day operation mode, Alarm for shift or Time due. but Master card is not registered. registered, but User card is not registered in Assigned Mode. Version 1.0 http://www.esmartlock.com 16 FX100 User Guide Master card registration in the lock Owner card. was failed. Cannot open the lock with Master Master card is not registered in the lock. card 1) Master card registration should be followed after deleting old Master card in the lock by 2) Put Master card on the lock before waiting time is out after Owner card. Please Register the Master card in the lock. 1. Check the Setting of User card by LOS.

(1) Free Selection Mode Validity / Operation mode / Lock ID /

Number of locks this user card can be used.

(2) Assigned Mode Validity /Operation Mode / Lock ID /

Number of locks this user card can be used. 2. Old User card may be still in the memory of the lock. Erase the card information from the lock by Master card, then register again with the User card. Low battery sign. Please replace the batteries. Too many goods may press the lock body or door. Push the locker door to make the space for the latch movement. Cannot open or close the lock by User card When lock was touched to wake up, five beep sounds with Red lamp. Latch does not move, while Card and lock operates in normal. Version 1.0 http://www.esmartlock.com 17 FX100 User Guide 7 Regulatory Statement FCC Part 15.105 statement (Class A) This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Part 15.21 statement Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device must not be co-located or operating in conjunction with any other antenna or transmitter. RF Exposure Statement (MPE) The antenna(s) must be installed such that a minimum separation distance of at least 20 cm is maintained between the radiator (antenna) and all persons at all times. Supplier's Declaration of Conformity 47 CFR 2.1077 Compliance Information Responsible Party Cardcom Address: 1301 S. Beach Blvd. Ste-P La Habra, CA 90631 Tel.: 562-943-6300 E-mail: esmartlock@cardcom.com Version 1.0 http://www.esmartlock.com 18

exhibit
download
text

1 2

User Manual FX200 Rev.01

Users Manual

pdf

571.90 KiB

May 27 2021 / November 23 2021

delayed release

USER GUIDE Furniture Lock

(model : FX200) Passtech Co., Ltd. Copyright 2017 Passtech Inc. All rights reserved. You are strictly prohibited to copy, disclose, distribute, or use this document in part or as a whole for any purposes other than those for which this document is disclosed. This document is copyrighted and contains confidential information and other intellectual property rights of Passtech Inc. Any unauthorized use, copy, disclosure or distribution constitutes infringement of Passtechs intellectual property rights. FX200 User Guide Passtech Inc. reserves the right to make changes to its applications or services or to discontinue any application or service at any time without notice. Passtech provides customer assistance in various technical areas, but does not have full access to data concerning the use and applications of customer's products. Therefore, Passtech assumes no liability and is not responsible for customer applications or software design or performance relating to systems or applications incorporating Passtech products. In addition, Passtech assumes no liability and is not responsible for infringement of patents and/or any other intellectual or industrial property rights of third parties, which may result from assistance provided by Passtech. Composition of the information in this manual has been done to the best of our knowledge. Passtech does not guarantee the correctness and completeness of the details given in this manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since, despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips. We have our development center in South Korea to provide technical support. For any technical assistance can contact our technical support team as below;

E-mail: passtech@esmartlock.com Version: 1.0 2 http://www.esmartlock.com FX200 User Guide Table of Contents 1. Understanding FX200 FURNITURE LOCK ................................. 4 What is FX200 FURNITURE LOCK? ............................................. 4 1.1 1.2 Operating cards ............................................................................. 4 2. Types of Lock Operating Scenario ........................................... 5 Free Selection (Shared Use) ......................................................... 5 2.1 2.2 Assigned Mode (Permanent Use) .................................................. 5 2.3 Smart Assign mode (Shared or permanent use) ............................ 5 3. Lock Operation ......................................................................... 5 RF tag uses ................................................................................... 6 3.1 3.2 Assigned Mode .............................................................................. 6 3.2.1 Open & Close by RF card key ............................................................................... 6 3.2.2 Open & Close by smartphone ................................................................................ 6 3.3 Free Selection Mode ...................................................................... 8 3.3.1 Open & Close by RF card key ............................................................................... 8 3.3.2 Open & Close by Smartphone ................................................................................ 9 3.4 Open in Emergency ....................................................................... 9 4. Card Operation ...................................................................... 10 Owner Card ................................................................................. 10 4.1 4.2 Master Card ................................................................................. 10 4.2.1 Functions of the Master Card I & II .................................................................. 10 4.2.2 Replacing old Master cards with New Master cards ........................................ 10 4.3 User Card ..................................................................................... 11 4.3.1 Free Selection (Shared Use) ............................................................................. 11 4.3.2 Assigned Mode (Permanent Use) ...................................................................... 12 4.3.3 Replacing old User card with New User card .................................................. 12 4.4 4.5 Maintenance card ........................................................................ 12 Audit Trail card ............................................................................. 13 4.6 Lock Info card .............................................................................. 13 5. Indication Instruction ............................................................. 14 6. Specification ........................................................................... 14 ANNEX A Beep & LED Table ....................................................... 15 7 Regulatory Statement ............................................................. 17 Version: 1.0 3 http://www.esmartlock.com Key card Setup card Master I card FX200 User Guide 1. Understanding FX200 FURNITURE LOCK 1.1 What is FX200 FURNITURE LOCK?

- FX200 locker locks are the locker lock operated by either 13,56 MHz RF Card Key.

- FX200 can work as both offline (standalone) or online mode.

- To set FX200 as online system, additional peripherals such as Access point, Server and client software are necessary. Refer Esmart Ultra client user manual for online lock system setup. 1.2 Operating cards Card Name Description Security Key value to be loaded to locks at scanning. Then, the locks will accept only the RFID cards which have the same security key value. Lock will be programmed with various options at scanning. Setup card can be set from Lock Installation Software (LIS). All locks will be open at scanning. User card registration in the lock will be deleted and the lock will be ready to accept new user card. Master II Locks will be open or close without User card registration deletion. card Useful when user needs to open lock temporarily. Master cards registration to be deleted at scanning this card on locks. After Owner card scanning on lock, scan new master cards to register to the Owner card lock. Maintenance card Audit trail card Lock to be programmed with various options at scanning as you set. Time, Master cards registration, Master code, etc can be updated without changing lock ID. Latest 150 event history to be collected at scanning. Card number, event type (open & close), time of event, user name, etc to be collected. Various information of lock can be collected into this card. Lock info One Lock info card can collect information from up to 40 locks. card Lock ID, Operation mode, Power status, software version, time, auto opening and more to be collected. Card type Mifare 1KB Mifare 4KB

*****This furniture lock system is using in Hotel, Office and any place which is without residential area. Version: 1.0 4 http://www.esmartlock.com FX200 User Guide 2. Types of Lock Operating Scenario FX200 locker locks are designed to work for the various operation requirements by simple set up process. Following operation modes can be programmed before or after lock installation. 2.1 Free Selection (Shared Use)

- User card is not assigned to any certain lock but User is free to select any empty locker to occupy.

- Programmable to make LED lamp blinked to represent locker is in use. (In-use lamp)

- Programmable to use multiple lockers (up to 5) with one User card. (Multi-lock)

- Programmable for Time based operation. 2.2 Assigned Mode (Permanent Use)

- Each locker is assigned to each User card in advance.

- Programmable to use multiple lockers (up to 5) with one User card. (Multi-lock)

- Also, programmable for multiple user cards (up to 8) to one locker. (Multi-user) 2.3 Smart Assign mode (Shared or permanent use)

- User can select any empty locker and the user is assigned to the chosen locker.

- Without the help of administrator, user can freely change the assigned locker to any empty locker.

- Programmable to make LED lamp blinked to represent locker in use.

- Programmable to set specific time to release the assigned locker to empty locker after the changing the locker. 3. Lock Operation Version: 1.0 5 http://www.esmartlock.com FX200 User Guide 3.1 RF tag uses FX200 can be set with two different credential acceptance modes. RF tag mode accepts RF tag These modes can be set from Maintenance card (or setup card)

[RF tag only]

3.2 Assigned Mode 3.2.1 Open & Close by RF card key RF card key can be used anytime. Touch the lock + Put User Card on the Lock. 3.2.2 Open & Close by smartphone

(1) How it works card.

- Visitor receives RFID user card at the front desk and goes to the locker assigned to this

- Then he downloads Passtech Mobile App from Google play store and install it into his smartphone and then wakes up the lock with the user card and registers himself directly into the mobile App.

- From that time on, the lock can be operated through a smartphone.

- Mobile access key expires as soon as the user card is no more valid. Version: 1.0 6 http://www.esmartlock.com FX200 User Guide

- Thus, the smartphone is fully synchronized with RF user card.

(3) Registration via Mobile App Run the mobile App. If you are not registered yet, the registration page will show up right after you start the mobile application. Otherwise, go to Menu and press the Registration button for a new registration. To register via the Mobile App, follow the instructions that will appear on your mobile device screen. The instructions are like following:

- Scan your user card on the lock.

- To enter registration mode, touch the lock (the registration modes on when the locks LED is

- Touch the Register button blinking) below. Now, when registration is done, your mobile key in your smartphone is fully synchronised with the user card and ready to operate the lock. It means that the information from the user card corresponds with that of the mobile key, including the validity period. Thus, the information about the valid date will automatically appear on the mobile device screen. The registration is a one-time process, so you dont need to do it more than once for one Version: 1.0 7 http://www.esmartlock.com FX200 User Guide To open the locker, press the lock icon button on your mobile device monitor. locker.

(5) Access Log in the Menu bar. To check the history of the mobile access key, visit the Access Log 3.3 Free Selection Mode 3.3.1 Open & Close by RF card key Touch the lock + Put User card on the lock. Version: 1.0 8 http://www.esmartlock.com FX200 User Guide 3.3.2 Open & Close by Smartphone

(4) How it works Download Passtech Mobile App from Google play store and install it into his smartphone After running the App, choose Free mode on the setting tab. Then, you can freely choose any available lock to operate. To access your mobile device, please set your lock for CSN Free mode and change the usage mode to Free mode from the Passtech APP from your mobile device. 3.4 Open in Emergency In case User loses his(her) card, Operator can open the lock by Master Card I. Master card can be set by Set up Card. Once Master card I is used to open the lock, the lock reverts to default position User Card ID will be erased from the lock if Master Card I has the function to delete the User ID. Version: 1.0 9 http://www.esmartlock.com FX200 User Guide 4. Card Operation 4.1 Owner Card The role of the Owner card is to delete the Master card registration. Therefore, Owner card will be used to delete current master card registration in the lock, and make the lock to be ready to register new Master Card. It is simple to delete the Master card registration and to register new master card in the lock :

(1) Using Maintenance Card Read the master cards (all Master cards to be used in a lock) to register in each lock at Maintenance menu in LOS program (or online client program). Version: 1.0 10 http://www.esmartlock.com FX200 User Guide Put the Maintenance card to the reader, and download the master card chip numbers to the Card. Put the Maintenance card to the locks, then, new Master cards will be registered to the lock, and lost master card will be blocked.

(2) Using Owner Card Delete the old master card registrations in the lock (refer to the 4.1) with Owner Card. Put new master cards to each lock so as to register new master cards. Then, old master card you lost will not be used. All existing Master cards needs to be registered again together with new Master card because all master card registrations were deleted if Owner card is used. 4.3 User Card 4.3.1 Free Selection (Shared Use) The initial status of the lock in Free Selection mode is open (Latch is inside). Touch to wake up the lock, and place your card (or any form of user key) to the front body of

(1) Initial Use Select the empty locker. Put your belongings in the locker. the lock. Wait until the Green LED lights and Beep sounds once. Latch will move out, and lock is closed. Close the door. The lock will be remained at locking state.

(2) Open the lock Touch to wake up the lock. Put your user card to the front body of the lock. Lock will check the lock ID and key of the user card (or any form of user key). Lock will emit Green LED and beep sound once it is right user card. Latch will be moved and locker will open. User information will be erased from the lock so that new user can use the empty lock. In free selection mode, lock and card need to read and write the each others information. So Version: 1.0 11 http://www.esmartlock.com FX200 User Guide please do not sway the card until the latch is moved. 4.3.2 Assigned Mode (Permanent Use) The initial status of the lock in Assigned Mode is closed status (latch out) Touch to wake up the lock. Put the User Card to the front body of the assigned lock. Lock checks the card, if the key of the user card is correct, Lock will emit green LED lights and beep sound once. Then, lock will be opened, and closed again in 5 seconds. To close the locker, just close the door. Lock will remain the closed status. 4.3.3 Replacing old User card with New User card

(1) Free Selection be accepted.

(2) Assigned Mode lock. Issue new user card by LOS (Locker Operation System) program. In case the locker is closed, put Master Card to the lock to open the lock. Put new User card to the lock, then lock will accept new User card, and missing card will not In case the locker is opened, just put the new user card to the lock, and the lock will register this new user card key. Old User key will not be accepted. Issue new User card (with assigned locker Number) for Assigned mode. Put Master Card to the lock to delete the old user card, and put the new User card to the Lock will accept the new user card only, and old user card registration will be deleted. In case the lock is set for multiple users, lock revision should be updated when new user card is issued by LOS program. Then, Lock updates its revision number when new user card is scanned. The other user cards which are assigned to this locker also needs to be reissued with updated lock revision by LOS program. 4.4 Maintenance card Program Maintenance card as you want from LOS (or online client software) Put Maintenance card to each lock, lock will be set as you programmed in step 1. Time of the lock, Master cards change, Wireless online channel, Auto status update, etc Version: 1.0 12 http://www.esmartlock.com FX200 User Guide can be updated with Maintenance card. 4.5 Audit Trail card Put Audit Trail Card to the lock. melody is on. 4.6 Lock Info card The latest event data (up to 150 events) will be downloaded from lock to the Card. Wait until Read the Card at LOS program, and 150 event data will be saved to the PC. Put Lock info Card to the lock. collect up to 40 locks. Various lock information data will be downloaded from locks to the Card. One card can Read the Card at LOS program, and all data will be saved to the PC. Lock ID, operation mode, Power status, time, auto opening setting status, RF channel and more will be indicated. For further information about all system cards and how to issue, refer to LMS / LOS or Esmart ultra client manual. Version: 1.0 13 http://www.esmartlock.com 5. Indication Instruction FX200 User Guide 1) 2) 3) 4) Open/CloseGREEN LED on for 0.2 second, one beep sound for 0.2 second. Successful programmingMelody. Indicate for mistakeRED LED flashes 3 times, 3 beep sounds Low voltageRED LED blinks 5 times, and beep sounds 5 times. 6. Specification Item Detail Material Polycarbonate Communication 2.4Ghz Zigbee(ONLINE COMUNICATION) Power Supply 5VDC Wired power Mifare Classic & Desfire at default, ISO14443 Type A Security Open/Close RFID Indicator Dimension BLE AES128 RFID CARD, Wireless Control Buzzer Front) 35.25mm*64.50mm*6mm Back) 71.75mm*71.75mm*25mm Operation TEMP 0 ~ 50 Other USB Charger, Inner lights(LED) Certification CE, FCC Version: 1.0 14 http://www.esmartlock.com FX200 User Guide ANNEX A Beep & LED Table Beep LED Description 1 x short beep 1 x Green(2sec) OK 2 x short beep 3 x short beep 1 x Red(2sec) Operation Error 1 x Red & Green in Time over turn(2sec) Do-Re-Mi Melody 1 x Red & Green in Successful Set up / mode 5 x short beep 5 x Red & Green Lack of power supply turn(2sec) change / Time setting Do-Re-Mi Melody 2 x Red & Green Successful connection between front and back 1 x short beep 1 x Green Off the Alarm by Control Melody 1 x Green Successful registration of No Beep Both Green and Red LED 1) Owner Card is not blinks registered. voltage bodies. card No Beep Red on/off Owner card is registered, No Beep Green on/off Owner & Master card are Owner Card/ Master Card 2) In case of Shift or Week-

day operation mode, Alarm for shift or Time due. but Master card is not registered. registered, but User card is not registered in Assigned Mode. Version: 1.0 15 http://www.esmartlock.com FX200 User Guide Master card registration in the lock Owner card. was failed. Cannot open the lock with Master Master card is not registered in the lock. card 1) Master card registration should be followed after deleting old Master card in the lock by 2) Put Master card on the lock before waiting time is out after Owner card. Please Register the Master card in the lock. 1. Check the Setting of User card by LOS.

(1) Free Selection Mode Validity / Operation mode / Lock ID /

Number of locks this user card can be used.

(2) Assigned Mode Validity /Operation Mode / Lock ID /

Number of locks this user card can be used. 2. Old User card may be still in the memory of the lock. Erase the card information from the lock by Master card, then register again with the User card. Cannot open or close the lock by User card When lock was touched to wake up, Lack of power supply voltage sign. Check the five beep sounds with Red lamp. power supply. Latch does not move, while Card and lock operates in normal. Too many goods may press the lock body or door. Push the locker door to make the space for the latch movement. Version: 1.0 16 http://www.esmartlock.com FX200 User Guide 7 Regulatory Statement FCC Part 15.105 statement (Class A) This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Part 15.21 statement Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device must not be co-located or operating in conjunction with any other antenna or transmitter. RF Exposure Statement (MPE) The antenna(s) must be installed such that a minimum separation distance of at least 20 cm is maintained between the radiator (antenna) and all persons at all times. Supplier's Declaration of Conformity 47 CFR 2.1077 Compliance Information Responsible Party Cardcom Address: 1301 S. Beach Blvd. Ste-P La Habra, CA 90631 Tel.: 562-943-6300 E-mail: esmartlock@cardcom.com Version: 1.0 17 http://www.esmartlock.com

exhibit
download
text

1 2

Internal Photos

Internal Photos

pdf

666.51 KiB

May 27 2021 / November 23 2021

delayed release

exhibit
download
text

1 2

External Photos

External Photos

pdf

206.84 KiB

May 27 2021 / November 23 2021

delayed release

exhibit
download
text

1 2

Label Info

ID Label/Location Info

pdf

186.92 KiB

May 27 2021

exhibit
download
text

1 2

Agent Authorization Letter

Cover Letter(s)

pdf

146.36 KiB

May 27 2021

Date : Nov. 9, 2017 Rev : 2.3 FCC Agent Authorization Letter HACS-F004 FCC Agent Authorization Letter HCT America LLC

(TCB@hctamerica.com) 1726 Ringwood Avenue San Jose, CA 95131 TEL: +1.510.933.8848, Fax: +1.510.933.8849 Page 1 of 2 This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the controlled electronic copy to ensure validity. This document is the confidential property of HCT America LLC. It may not be forwarded or reproduced in whole or in part without written permissions from HCT America LLC Date : Nov. 9, 2017 Rev : 2.3 REVISION TABLE Rev 1.0 2.0 2.1 2.2 2.3 Description of Change Original Release(Obsolete) Updated template(Obsolete) Updated address(Obsolete) Updated address Fixed Typo Agent Date 06/14/2012 10/01/2012 01/10/2014 11/18/2016 11/09/2017 Approved QM QM QM QM QM HACS-F004 FCC Agent Authorization Letter HCT America LLC

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To whom it may concern:

Subject : FCC Agent Authorization Letter for FCC ID: W6YFX100 We, the undersigned, hereby authorize HCT CO., LTD. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by HCT CO., LTD. on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). We recognize that we are still responsible for the terms and conditions outlined in the HCT America Client Services Agreement. This authorization is valid until further written notice from the applicant. Sincerely, Signed by:

Company Name: PASSTECH CO., LTD Company Address: B-402, 215 Galmachi-ro, Jungwon-gu Seongnam-si, Gyeonggi-do South Korea, 13217 Contact Name / Title: Hyung-Mo Park / CEO HACS-F004 FCC Agent Authorization Letter Rev : 2.3

exhibit
download
text

1 2

Confidentiality Request Letter

Cover Letter(s)

pdf

151.07 KiB

May 27 2021

Date : Nov. 09, 2017 Rev : 3.0 FCC Confidentiality Request Letter HACS-F003 FCC Confidentiality Request Letter HCT America LLC

(TCB@hctamerica.com) 1726 Ringwood Avenue San Jose, CA 95131 TEL: +1.510.933.8848, Fax: +1.510.933.8849 Page 1 of 2 This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the controlled electronic copy to ensure validity. This document is the confidential property of HCT America LLC. It may not be forwarded or reproduced in whole or in part without written permissions from HCT America LLC Date : Nov. 09, 2017 Rev : 3.0 REVISION TABLE Rev 1.0 2.0 2.1 2.2 3.0 Description of Change Original Release(Obsolete) Updated template(Obsolete) Updated address(Obsolete) Updated address Updated LTC and STC Confidentiality table Date 06/14/2012 10/01/2012 01/10/2014 11/18/2016 11/09/2017 Approved QM QM QM QM QM HACS-F003 FCC Confidentiality Request Letter HCT America LLC

(TCB@hctamerica.com) 1726 Ringwood Avenue San Jose, CA 95131 TEL: +1.510.933.8848, Fax: +1.510.933.8849 Page 2 of 2 This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the controlled electronic copy to ensure validity. This document is the confidential property of HCT America LLC. It may not be forwarded or reproduced in whole or in part without written permissions from HCT America LLC PASSTECH CO., LTD. DATE : 5/25/2021 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD SUBJECT : Request for Confidentiality for FCC ID : W6YFX100 We hereby request confidential treatment of the information accompanying this application as outlined below:

LONG-TERM AND SHORT-TERM CONFIDENTIAL LIST Description LONG-TERM CONFIDENTIAL SHORT-TERM CONFIDENTIAL

(180 DAYS) Exhibit 1 2 3 4 5 6 7 8 Block Diagram Operational Description Parts List Schematics External Photos Internal Photos Test-Setup Photos Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signed by:

exhibit
download
text

1 2

MPE Test Report

RF Exposure Info

pdf

327.95 KiB

May 27 2021

exhibit
download
text

1 2

NFC Test Report

Test Report

pdf

3.48 MiB

May 27 2021

exhibit
download
text

1 2

Test Setup Photo

Test Setup Photos

pdf

3.21 MiB

May 27 2021 / November 23 2021

delayed release

exhibit
download
text

1 2

Product Differences Description

Cover Letter(s)

pdf

456.95 KiB

May 27 2021

exhibit
download
text

1 2

BT LE Test Report

Test Report

pdf

2.58 MiB

May 27 2021

exhibit
download
text

1 2

Zigbee Test Report

Test Report

pdf

1.52 MiB

May 27 2021

		frequency	equipment class	purpose
1	2021-05-27	13.56 ~ 13.56	DXX - Part 15 Low Power Communication Device Transmitter	Original Equipment
2		2405 ~ 2480	DTS - Digital Transmission System

Application Forms

app s	Applicant Information
1 2	Effective	2021-05-27
1 2	Applicant's complete, legal business name	PASSTECH CO., LTD
1 2	FCC Registration Number (FRN)	0018558270
1 2	Physical Address	B-402, 215 Galmachi-ro, Jungwon-gu
1 2		B-402, 215
1 2		Seongnam-si, Gyeonggi-do, N/A
1 2		South Korea

app s	TCB Information
1 2	TCB Application Email Address	T******@hctamerica.com
1 2	TCB Scope	A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
1 2	TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques

app s	FCC ID
1 2	Grantee Code	W6Y
1 2	Equipment Product Code	FX100

app s	Person at the applicant's address to receive grant or for contact
1 2	Name	H****** P******
1 2	Title	CEO
1 2	Telephone Number	82-31********
1 2	Fax Number	82-31********
1 2	E-mail	p******@esmartlock.com

app s	Technical Contact
		n/a

app s	Non Technical Contact
		n/a

app s	Confidentiality (long or short term)
1 2	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1 2	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1 2	If so, specify the short-term confidentiality release date (MM/DD/YYYY format)	11/23/2021
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1 2	Is this application for software defined/cognitive radio authorization?	No
1 2	Equipment Class	DXX - Part 15 Low Power Communication Device Transmitter
1 2	Equipment Class	DTS - Digital Transmission System
1 2	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	FURNITURE LOCK
1 2	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1 2	Modular Equipment Type	Does not apply
1 2	Purpose / Application is for	Original Equipment
1 2	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	Yes
1 2	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1 2	Grant Comments	Power listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
1 2	Is there an equipment authorization waiver associated with this application?	No
1 2	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1 2	Firm Name	HCT Co., Ltd.
1 2	Name	L** Y****
1 2	Telephone Number	82-31********
1 2	Fax Number	82-31********
1 2	E-mail	y******@hct.co.kr

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	15C	CC	13.56000000	13.56000000
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
2	1	15C	CC	2402	2480	0.000342
2	2	15C	CC	2405	2480	0.001

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

recent releases: 2BFSY-K11 Dongguan Sinbon Electronic Technology Co.,LTD 2AWHS-TWS049 YOUNGSTAR ELECTRONIC CO., LIMITED 2AC23-DCT1Z Hui Zhou Gaoshengda Technology Co.,LTD 2ATEV-BL1207-P Hangzhou BroadLink Technology Co., Ltd. 2BF9S-DW10 Shenzhen Ailaimaike Electronic Co,Ltd.