| all | frequencies |
|
exhibits | applications |
|---|---|---|---|---|
| manual |
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 2 3 4 5 |
|
User manual | Users Manual | 370.09 KiB | August 02 2019 / February 01 2020 | delayed release | ||
| 1 2 3 4 5 | Block Diagram | Block Diagram | August 02 2019 | confidential | ||||
| 1 2 3 4 5 |
|
Cover letter | Cover Letter(s) | 85.99 KiB | August 02 2019 / August 05 2019 | |||
| 1 2 3 4 5 | External photos | External Photos | August 02 2019 / February 01 2020 | delayed release | ||||
| 1 2 3 4 5 | Internal photos | Internal Photos | August 02 2019 / February 01 2020 | delayed release | ||||
| 1 2 3 4 5 |
|
Label | ID Label/Location Info | 23.68 KiB | August 02 2019 / August 05 2019 | |||
| 1 2 3 4 5 |
|
Label location | ID Label/Location Info | 511.59 KiB | August 02 2019 / August 05 2019 | |||
| 1 2 3 4 5 | Operational Description | Operational Description | August 02 2019 | confidential | ||||
| 1 2 3 4 5 | Parts list | Parts List/Tune Up Info | August 02 2019 | confidential | ||||
| 1 2 3 4 5 |
|
SAR report part 1 | RF Exposure Info | 5.76 MiB | August 02 2019 / August 05 2019 | |||
| 1 2 3 4 5 |
|
SAR report part 2 | RF Exposure Info | 3.74 MiB | August 02 2019 / August 05 2019 | |||
| 1 2 3 4 5 | SAR test setup | Test Setup Photos | August 02 2019 / February 01 2020 | delayed release | ||||
| 1 2 3 4 5 | Schematics | Schematics | August 02 2019 | confidential | ||||
| 1 2 3 4 5 | Software Security | SDR Software/Security Inf | August 02 2019 | confidential | ||||
| 1 2 3 4 5 |
|
Test report | Test Report | 5.36 MiB | August 02 2019 / August 05 2019 | |||
| 1 2 3 4 5 | Test setup | Test Setup Photos | August 02 2019 / February 01 2020 | delayed release | ||||
| 1 2 3 4 5 | Tune up | Parts List/Tune Up Info | August 02 2019 | confidential | ||||
| 1 2 3 4 5 |
|
Reference test report part 1 | Test Report | 1.02 MiB | August 02 2019 / August 05 2019 | |||
| 1 2 3 4 5 |
|
Reference test report part 10 | Test Report | 5.41 MiB | August 02 2019 / August 05 2019 | |||
| 1 2 3 4 5 |
|
Reference test report part 11 | Test Report | 4.65 MiB | August 02 2019 / August 05 2019 | |||
| 1 2 3 4 5 |
|
Reference test report part 12 | Test Report | 5.40 MiB | August 02 2019 / August 05 2019 | |||
| 1 2 3 4 5 |
|
Reference test report part 13 | Test Report | 5.76 MiB | August 02 2019 / August 05 2019 | |||
| 1 2 3 4 5 |
|
Reference test report part 14 | Test Report | 5.78 MiB | August 02 2019 / August 05 2019 | |||
| 1 2 3 4 5 |
|
Reference test report part 2 | Test Report | 3.17 MiB | August 02 2019 / August 05 2019 | |||
| 1 2 3 4 5 |
|
Reference test report part 3 | Test Report | 2.27 MiB | August 02 2019 / August 05 2019 | |||
| 1 2 3 4 5 |
|
Reference test report part 4 | Test Report | 2.05 MiB | August 02 2019 / August 05 2019 | |||
| 1 2 3 4 5 |
|
Reference test report part 5 | Test Report | 2.12 MiB | August 02 2019 / August 05 2019 | |||
| 1 2 3 4 5 |
|
Reference test report part 6 | Test Report | 2.09 MiB | August 02 2019 / August 05 2019 | |||
| 1 2 3 4 5 |
|
Reference test report part 7 | Test Report | 5.43 MiB | August 02 2019 / August 05 2019 | |||
| 1 2 3 4 5 |
|
Reference test report part 8 | Test Report | 5.46 MiB | August 02 2019 / August 05 2019 | |||
| 1 2 3 4 5 |
|
Reference test report part 9 | Test Report | 5.53 MiB | August 02 2019 / August 05 2019 | |||
| 1 2 3 4 5 | Reference test setup | Test Setup Photos | August 02 2019 / February 01 2020 | delayed release | ||||
| 1 2 3 4 5 |
|
Test report | Test Report | 1.18 MiB | August 02 2019 / August 05 2019 | |||
| 1 2 3 4 5 |
|
Test report Band 26 | Test Report | 1.67 MiB | August 02 2019 / August 05 2019 | |||
| 1 2 3 4 5 | Test setup | Test Setup Photos | August 02 2019 / February 01 2020 | delayed release | ||||
| 1 2 3 4 5 | Test setup band 26 | Test Setup Photos | August 02 2019 / February 01 2020 | delayed release | ||||
| 1 2 3 4 5 | Test Report | August 02 2019 / August 05 2019 | ||||||
| 1 2 3 4 5 | Test setup DFS | Test Setup Photos | August 02 2019 / February 01 2020 | delayed release |
| 1 2 3 4 5 | User manual | Users Manual | 370.09 KiB | August 02 2019 / February 01 2020 | delayed release |
Installation Manual D190 Mobile payment terminal PAX TECHNOLOGY LIMITED PAX TECHNOLOGY LIMITED Please check the components after unpacking. If any one of them is missing, or if there is a page missing from the product manual,ect., please contact the deale. 1. Contents Checklist Name D190 Mobile payment terminal AC Power Adapter USB Cable Battery Product Manual 2. Installation SAM/SIM Card 1) Remove the battery cover. 2) Remove the battery. Qty. 1 1 1 1 1 3) Insert the SAM/SIM card to the corresponding card slot (PS: The default hardware configuration only support SIM1 slot). Alignment battery tip side to battery tip in terminal and insert. Battery:
3. Instructions 1) Power ON/OFF Power on: Plug in power adapter or insert the battery, Press until the PAX LOGO display on LCD. button for 3 seconds button for 3 seconds until the Power off display on the Power off: Press LCD ,then press ENTER, then the POS terminal is being turned off. IC Card Put IC card chip side upward, push-in IC card slot and to bottom. 2) 3) Contactless Card 4) Battery Charge display The card read area is above the LCD, Put the card above the LCD. Connecting USB port with external adapter can charge the battery. And there are charging display. 5) Battery Charge style Please use the original adapter, if you need to charge. Working Environment Temperature: 050(32122) Humidity: 10%93%( non-condense) Storage Environment Temperature:-2070(-4158) Humidity.:5%95% (non-condense) PAX TECHNOLOGY LIMITED 4. Installation and Usage Tips 1) Avoid putting the terminal in direct sunlight, high temperature, moist, or dusty environment. 2) Forbid non-professional to repair the terminal. 3) Before insert the card, please check internal and around of IC card slot. if you found some suspicious objects , must report to related administrator. 5. Lithium Ion Battery Usage Tips WARNING:
1Don't use the battery in sunlight or smoke, dust environment. 2Prohibited to strike, squeeze and tread on battery or throw it into the liquid and fire. 3If battery is impressive, deformed, damaged or exothermic seriously, please stop using 4If the continuous working time is only half of new one, the battery life may be end. Please immediately and replace it!
replace it!
5Must use the specified battery model and charger, otherwise there will be explosion 6Charging time can not exceed 24 hours. If the battery is out of power, please recharge in time. Avoid damaging the battery in over-charge and over-discharge. 7If be non-use for long time, please recharge the battery per 6 months to avoid shortening its life. 8Suggest to replace it when the battery have been used for 2 years. 9Be sure to follow the instructions to dispose the wasted batteries. FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following PAX TECHNOLOGY LIMITED measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC RF Exposure Information (SAR) is to to at of by as so set the the
(RF) radio levels power device energy operate Federal multiple designed frequency use Commission Communications the maximum value. This device is designed and manufactured not to exceed the emission limits for exposure to the United States. During SAR testing, this device is set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage near the body. Although the SAR is determined at the highest certified power level, the actual SAR level of the while operating can be well below This is because the power only In general, the closer you are to a wireless base station required to reach the network. antenna, the lower the power output. The exposure standard for wireless employs a unit of measurement known as the Specific Absorption Rate, or SAR. The FCC has granted an Equipment Authorization for this model device with all reported SAR SAR levels information the Display Grant section of FCC ID:
For this device, the highest reported SAR value for usage near the body is 1.09 W/kg. While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement. with the can www.fcc.gov/oet/ea/fccid after searching on exposure be The SAR limit set by the FCC is 1.6W/kg. evaluated on guidelines. found in device as model V5PD190LTE compliance under FCC FCC with and this the RF file on is PAX TECHNOLOGY LIMITED ISED Notice This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en IC:
11689A-D190LTE ISED Radiation Exposure Statement This EUT is in compliance with SAR for general population/uncontrolled exposure limits in ISED RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528 and IEC 62209. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Cet appareil est conforme aux limites d'exposition DAS incontrle pour la population gnrale de la norme CNR-102 science de linnovation et le dveloppement conomique Canada et a t test en conformit avec les mthodes de mesure et procdures spcifies dans IEEE 1528 et IEC 62209. Cet appareil et sa ou ses antennes ne doivent pas tre co-localiss ou fonctionner en conjonction avec tout autre antenne ou transmetteur. 5G 5150-5250MHz indoor use restriction warning RSS-247Annex 9: A 9.4 The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology. the device for operation in the band 51505250 MHz is only for indoor use to reduce the PAX TECHNOLOGY LIMITED la interrompre automatiquement potential for harmful interference to co-channel mobile satellite systems;
In addition, high-power radars are allocated as primary users (i.e. priority users) of the bands 52505350 MHz and 56505850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. L'appareil peut transmission en cas d'absence d'information transmettre ou d'chec oprationnel. Il est noter que cela ne vise pas interdire la transmission de donnes de contrle ou de signalisation ou l'utilisation de codes rptitifs lorsque la technologie l'exige.
-le dispositif de fonctionnement dans la bande 5150 5250 MHz n'est utilis qu'
l'intrieur pour rduire les risques d'interfrences nuisibles pour les systmes mobiles par satellite cocanal;
En outre, les radars de haute puissance sont attribus en tant qu'utilisateurs principaux
(c.--d. utilisateurs prioritaires) des bandes 5250 5350 MHz et 5650 5850 MHz et que ces radars pourraient causer des interfrences et/ou endommager les dispositifs LAN-le. PAX TECHNOLOGY LIMITED reserves the right to change product technology specifications without notifying. PAX TECHNOLOGY LIMITED Manufacturer: PAX Computer Technology (Shenzhen) Co.,Ltd. Address:4/F, No.3 Building, Software Park, Second Central Science-Tech Road, High-Tech Industrial Park, Shenzhen, Guangdong, P.R.C. Tel: 0755-86169630 Website: http://www.pax.com.cn Fax: 0755-86169634 PAX TECHNOLOGY LIMITED Responsible Party: PAX Technology, Inc. 8880 Freedom Crossing Trail, Building 400, 3rd Floor Suite 300, Jacksonville , Florida, 32256 Tony Fernandez
+1 623-640-9529
| 1 2 3 4 5 | Cover letter | Cover Letter(s) | 85.99 KiB | August 02 2019 / August 05 2019 |
PAX Computer Technology (Shenzhen) Co., Ltd. Partners for the Next Generation of POS Solutions Product Declaration To Whom It May Concern, Dear Sir/Madam, This is to confirm that the FIBOCOMs M910 LTE Cat M1 Modem module is used in PAXs Mobile Payment Terminal D190. Due to the limitations of the carrier network in the USA, GSM and NB-IOT function will be not used in the POS, We turned off this function by AT command, not change the Firmware of the Module. We only use the LTE CatM1 Band as below:
LTE M1-BAND 2 LTE M1-BAND 4 LTE M1-BAND 5 LTE M1-BAND 12 LTE M1-BAND 13 LTE M1-BAND 26(814-824) LTE M1-BAND 26(824-849) Should you have any questions or comments regarding this matter, please have my best attention. Sincerely yours, Contact Person: Jenna Tan Company: PAX Computer Technology (Shenzhen) Co., Ltd. Tel: 86-755- 86169676 Fax: 86-755- 86155423 E-Mail: certservice@paxsz.com 4/F, A Building, 2#., KefengRoad, Science and Technology Park, Nanshan District, Shenzhen Guangdong, P.R.C 518057
| 1 2 3 4 5 | SAR report part 1 | RF Exposure Info | 5.76 MiB | August 02 2019 / August 05 2019 |
FCC SAR Test Report Report No. : FA961801 FCC SAR Test Report APPLICANT
: PAX Technology Limited EQUIPMENT
: Mobile Payment Terminal BRAND NAME
: PAX MODEL NAME
: D190 FCC ID
: V5PD190LTE STANDARD
: FCC 47 CFR Part 2 (2.1093) ANSI/IEEE C95.1-1992 IEEE 1528-2013 The product was received on Jun. 18, 2019 and testing was started from Jul. 05, 2019 and completed on Jul. 12, 2019. We, Sporton International (Shenzhen) Inc., would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this variant report apply exclusively to the tested model / sample. Without written approval of Sporton International (Shenzhen) Inc., the test report shall not be reproduced except in full. Reviewed by: Long Liang / Supervisor Approved by: Johnny Chen / Manager Sporton International (ShenZhen) Inc. 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen, 518055 Peoples Republic of China Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 1 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report Report No. : FA961801 Table of Contents 1. Statement of Compliance ............................................................................................................................................. 4 2. Administration Data ...................................................................................................................................................... 5 3. Guidance Applied .......................................................................................................................................................... 5 4. Equipment Under Test (EUT) Information ................................................................................................................... 6 4.1 General Information ............................................................................................................................................... 6 4.2 General LTE SAR Test and Reporting Considerations ........................................................................................... 7 5. RF Exposure Limits....................................................................................................................................................... 9 5.1 Uncontrolled Environment ...................................................................................................................................... 9 5.2 Controlled Environment .......................................................................................................................................... 9 6. Specific Absorption Rate (SAR) ..................................................................................................................................10 6.1 Introduction ...........................................................................................................................................................10 6.2 SAR Definition .......................................................................................................................................................10 7. System Description and Setup ...................................................................................................................................11 7.1 E-Field Probe ........................................................................................................................................................12 7.2 Data Acquisition Electronics (DAE) .......................................................................................................................12 7.3 Phantom ................................................................................................................................................................13 7.4 Device Holder........................................................................................................................................................14 8. Measurement Procedures ...........................................................................................................................................15 8.1 Spatial Peak SAR Evaluation ................................................................................................................................15 8.2 Power Reference Measurement............................................................................................................................16 8.3 Area Scan .............................................................................................................................................................16 8.4 Zoom Scan ............................................................................................................................................................17 8.5 Volume Scan Procedures ......................................................................................................................................17 8.6 Power Drift Monitoring ...........................................................................................................................................17 9. Test Equipment List .....................................................................................................................................................18 10. System Verification ....................................................................................................................................................19 10.1 Tissue Simulating Liquids ....................................................................................................................................19 10.2 Tissue Verification ...............................................................................................................................................20 10.3 System Performance Check Results ...................................................................................................................21 11. RF Exposure Positions ..............................................................................................................................................22 11.1 SAR Testing for Tablet .........................................................................................................................................22 12. Conducted RF Output Power (Unit: dBm) ................................................................................................................23 13. Antenna Location .......................................................................................................................................................44 14. SAR Test Results .......................................................................................................................................................45 14.1 Body SAR ...........................................................................................................................................................47 15. Repeated SAR Measurement ....................................................................................................................................49 16. Simultaneous Transmission Analysis ......................................................................................................................50 16.1 Body Exposure Conditions ..................................................................................................................................51 17. Uncertainty Assessment ...........................................................................................................................................52 18. References ..................................................................................................................................................................53 Appendix A. Plots of System Performance Check Appendix B. Plots of High SAR Measurement Appendix C. DASY Calibration Certificate Appendix D. Test Setup Photos Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 2 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report Report No. : FA961801 History of this test report Report No. Version Description FA961801 01 Initial issue of report Issued Date Jul. 29, 2019 Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 3 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report 1. Statement of Compliance Report No. : FA961801 The maximum results of Specific Absorption Rate (SAR) found during testing for PAX Technology Limited, Mobile Payment Terminal, D190, are as follows. Highest 1g SAR Summary Equipment Class Frequency Band Licensed GSM LTE DTS NII DSS WLAN Bluetooth GSM850 GSM1900 Band 12 Band 13 Band 5 Band 26 Band 4 Band 2 2.4GHz 5GHz 2.4GHz Highest SAR Summary Body
(Separation 0mm) 1g SAR (W/kg) Highest Simultaneous Transmission 1g SAR (W/kg) 1.07 0.23 0.10 0.11 0.13 0.13
<0.10 0.11 0.18 1.09
<0.10 1.59 1.20 1.59 1.07 Date of Testing:
2019/7/5~2019/7/12 This device is in compliance with Specific Absorption Rate (SAR) for general population/uncontrolled exposure limits (1.6 W/kg for Partial-Body 1g SAR specified in FCC 47 CFR part 2 (2.1093) and ANSI/IEEE C95.1-1992, and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528-2013 and FCC KDB publications. Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 4 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report 2. Administration Data Report No. : FA961801 Sporton International (Shenzhen) Inc. is accredited to ISO/IEC 17025:2017 by American Association for Laboratory Accreditation with Certificate Number 5145.01. Test Firm Sporton International (Shenzhen) Inc. Testing Laboratory Test Site Location 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen, 518055 Peoples Republic of China TEL: +86-755-86379589 FAX: +86-755-86379595 FCC Designation No. FCC Test Firm Registration No. CN1256 421272 Test Site No. Company Name PAX Technology Limited Applicant Address Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong 3. Guidance Applied IEEE 1528-2013 The Specific Absorption Rate (SAR) testing specification, method, and procedure for this device is in accordance with the following standards:
FCC 47 CFR Part 2 (2.1093) ANSI/IEEE C95.1-1992 FCC KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r04 FCC KDB 865664 D02 SAR Reporting v01r02 FCC KDB 447498 D01 General RF Exposure Guidance v06 FCC KDB 248227 D01 802.11 Wi-Fi SAR v02r02 FCC KDB 941225 D05 SAR for LTE Devices v02r05 Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 5 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report Report No. : FA961801 4. Equipment Under Test (EUT) Information 4.1 General Information Equipment Name Mobile Payment Terminal Product Feature & Specification Brand Name Model Name FCC ID WWAN Sample SN:
Wireless Technology and Frequency Range Mode HW Version SW Version PAX D190 V5PD190LTE 1260648334 GSM850: 824.2 MHz ~ 848.8 MHz GSM1900: 1850.2 MHz ~ 1909.8 MHz LTE Band 2: 1850.7 MHz ~ 1909.3 MHz LTE Band 4: 1710.7 MHz ~ 1754.3 MHz LTE Band 5: 824.7 MHz ~ 848.3 MHz LTE Band 12: 699.7 MHz ~ 715.3 MHz LTE Band 13: 779.5 MHz ~ 784.5 MHz LTE Band 26: 814.7 MHz ~ 848.3 MHz WLAN 2.4GHz Band: 2412 MHz ~ 2462 MHz WLAN 5.2GHz Band: 5180 MHz ~ 5240 MHz WLAN 5.3GHz Band: 5260 MHz ~ 5320 MHz WLAN 5.5GHz Band: 5500 MHz ~ 5720MHz WLAN 5.8GHz Band: 5745 MHz ~ 5825 MHz Bluetooth: 2402 MHz ~ 2480 MHz NFC : 13.56 MHz GPRS/EGPRS LTE: QPSK, 16QAM WLAN 2.4GHz : 802.11b/g/n HT20 WLAN 5GHz : 802.11a/n HT20/HT40 WLAN 5GHz : 802.11ac VHT20/VHT40/VHT80 Bluetooth BR/EDR/LE NFC:ASK D190-xxx-xxx-xxxx V0.0.0.1 Production Unit EUT Stage Remark:
1. 802.11n-HT40 is not supported in 2.4GHz WLAN. 2. This device does not support voice function. 3. This device supports GPRS/EDGE class 33. 4. WLAN2.4GHz has no hotspot function. Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 6 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report Report No. : FA961801 4.2 General LTE SAR Test and Reporting Considerations Summarized necessary items addressed in KDB 941225 D05 v02r05 FCC ID Equipment Name V5PD190LTE Mobile Payment Terminal Operating Frequency Range of each LTE transmission band Channel Bandwidth LTE Band 2: 1850.7 MHz ~ 1909.3 MHz LTE Band 4: 1710.7 MHz ~ 1754.3 MHz LTE Band 5: 824.7 MHz ~ 848.3 MHz LTE Band 12: 699.7 MHz ~ 715.3 MHz LTE Band 13: 779.5 MHz ~ 784.5 MHz LTE Band 26: 814.7 MHz ~ 848.3 MHz LTE Band 2:1.4MHz, 3MHz, 5MHz, 10MHz, 15MHz, 20MHz LTE Band 4:1.4MHz, 3MHz, 5MHz, 10MHz, 15MHz, 20MHz LTE Band 5:1.4MHz, 3MHz, 5MHz, 10MHz LTE Band 12:1.4MHz, 3MHz, 5MHz, 10MHz LTE Band 13: 5MHz, 10MHz LTE Band 26:1.4MHz, 3MHz, 5MHz, 10MHz, 15MHz Uplink Modulations Used QPSK / 16QAM LTE Voice / Data requirements Data only LTE Category Version CA Support R13 ,Cat M1 Not Supported LTE MPR permanently built-in by design LTE A-MPR Spectrum plots for RB configuration In the base station simulator configuration, Network Setting value is set to NS_01 to disable A-MPR during SAR testing and the LTE SAR tests was transmitting on all TTI frames
(Maximum TTI) A properly configured base station simulator was used for the SAR and power measurement; therefore, spectrum plots for each RB allocation and offset configuration are not included in the SAR report. Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 7 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report Report No. : FA961801 Transmission (H, M, L) channel numbers and frequencies in each LTE band LTE Band 2 Bandwidth 1.4 MHz Bandwidth 3 MHz Freq.
(MHz) 1851.5 Freq.
(MHz) 1850.7 18615 Ch. #
Ch. #
L 18607 Bandwidth 5 MHz Freq.
(MHz) 1852.5 18625 Ch. #
M 18900 1880 18900 1880 18900 1880 H 19193 1909.3 19185 1908.5 19175 1907.5 Bandwidth 10 MHz Bandwidth 15 MHz Bandwidth 20 MHz Ch. #
18650 18900 19150 Freq.
(MHz) 1855 1880 1905 Ch. #
18675 18900 Freq.
(MHz) 1857.5 1880 19125 1902.5 Ch. #
18700 18900 19100 Freq.
(MHz) 1860 1880 1900 LTE Band 4 Bandwidth 1.4 MHz Bandwidth 3 MHz Freq.
(MHz) 1711.5 Freq.
(MHz) 1710.7 19965 Ch. #
Ch. #
L 19957 Bandwidth 5 MHz Freq.
(MHz) 1712.5 19975 Ch. #
M 20175 1732.5 H 20393 1754.3 20175 20385 1732.5 1753.5 20175 20375 1732.5 1752.5 Bandwidth 10 MHz Bandwidth 15 MHz Bandwidth 20 MHz Ch. #
20000 20175 20350 Freq.
(MHz) 1715 1732.5 1750 Ch. #
20025 20175 20325 Freq.
(MHz) 1717.5 Ch. #
20050 Freq.
(MHz) 1720 1732.5 20175 1732.5 1747.5 20300 1745 LTE Band 5 Bandwidth 1.4 MHz Bandwidth 3 MHz Bandwidth 5 MHz Bandwidth 10 MHz Ch. #
20407 20525 20643 Freq. (MHz) 824.7 836.5 848.3 Ch. #
20415 20525 20635 Freq. (MHz) 825.5 836.5 847.5 Ch. #
20425 20525 20625 Freq. (MHz) 826.5 836.5 846.5 Ch. #
20450 20525 20600 Freq. (MHz) 829 836.5 844 LTE Band 12 Bandwidth 1.4 MHz Bandwidth 3 MHz Bandwidth 5 MHz Bandwidth 10 MHz Ch. #
23017 23095 23173 Freq. (MHz) 699.7 707.5 715.3 Ch. #
23025 23095 23165 Freq. (MHz) 700.5 707.5 714.5 Ch. #
23035 23095 23155 Freq. (MHz) 701.5 707.5 713.5 Ch. #
23060 23095 23130 Freq. (MHz) 704 707.5 711 Bandwidth 5 MHz Bandwidth 10 MHz Channel #
Freq.(MHz) Channel #
Freq.(MHz) LTE Band 13 23205 23230 23255 779.5 782 784.5 LTE Band 26 23230 782 Bandwidth 1.4 MHz Bandwidth 3 MHz Bandwidth 5 MHz Bandwidth 10 MHz Bandwidth 15 MHz Ch. #
Freq. (MHz) Ch. #
Freq. (MHz) Ch. #
Freq. (MHz) Ch. #
Freq. (MHz) Ch. #
Freq. (MHz) 26697 26865 27033 814.7 831.5 848.3 26705 26865 27025 815.5 831.5 847.5 26715 26865 27015 816.5 831.5 846.5 26740 26865 26990 819 831.5 844 26765 26865 26965 821.5 831.5 841.5 L M H L M H L M H L M H Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 8 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report 5. RF Exposure Limits 5.1 Uncontrolled Environment Report No. : FA961801 Uncontrolled Environments are defined as locations where there is the exposure of individuals who have no knowledge or control of their exposure. The general population/uncontrolled exposure limits are applicable to situations in which the general public may be exposed or in which persons who are exposed as a consequence of their employment may not be made fully aware of the potential for exposure or cannot exercise control over their exposure. Members of the general public would come under this category when exposure is not employment-related; for example, in the case of a wireless transmitter that exposes persons in its vicinity. 5.2 Controlled Environment Controlled Environments are defined as locations where there is exposure that may be incurred by persons who are aware of the potential for exposure, (i.e. as a result of employment or occupation). In general, occupational/controlled exposure limits are applicable to situations in which persons are exposed as a consequence of their employment, who have been made fully aware of the potential for exposure and can exercise control over their exposure. The exposure category is also applicable when the exposure is of a transient nature due to incidental passage through a location where the exposure levels may be higher than the general population/uncontrolled limits, but the exposed person is fully aware of the potential for exposure and can exercise control over his or her exposure by leaving the area or by some other appropriate means. Limits for Occupational/Controlled Exposure (W/kg) Limits for General Population/Uncontrolled Exposure (W/kg) Whole-Body SAR is averaged over the entire body, partial-body SAR is averaged over any 1gram of tissue defined as a tissue volume in the shape of a cube. SAR for hands, wrists, feet and ankles is averaged over any 10 grams of tissue defined as a tissue volume in the shape of a cube. Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 9 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report 6. Specific Absorption Rate (SAR) 6.1 Introduction Report No. : FA961801 SAR is related to the rate at which energy is absorbed per unit mass in an object exposed to a radio field. The SAR distribution in a biological body is complicated and is usually carried out by experimental techniques or numerical modeling. The standard recommends limits for two tiers of groups, occupational/controlled and general population/uncontrolled, based on a persons awareness and ability to exercise control over his or her exposure. In general, occupational/controlled exposure limits are higher than the limits for general population/uncontrolled. 6.2 SAR Definition The SAR definition is the time derivative (rate) of the incremental energy (dW) absorbed by (dissipated in) an incremental mass (dm) contained in a volume element (dv) of a given density (). The equation description is as below:
SAR is expressed in units of Watts per kilogram (W/kg)
=
(
) =
(
)
=
||
Where: is the conductivity of the tissue, is the mass density of the tissue and E is the RMS electrical field strength. Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 10 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report 7. System Description and Setup Report No. : FA961801 The DASY system used for performing compliance tests consists of the following items:
A standard high precision 6-axis robot with controller, teach pendant and software. An arm extension for accommodating the data acquisition electronics (DAE). An isotropic Field probe optimized and calibrated for the targeted measurement. A data acquisition electronics (DAE) which performs the signal amplification, signal multiplexing, AD-conversion, offset measurements, mechanical surface detection, collision detection, etc. The unit is battery powered with standard or rechargeable batteries. The signal is optically transmitted to the EOC. The Electro-optical converter (EOC) performs the conversion from optical to electrical signals for the digital communication to the DAE. To use optical surface detection, a special version of the EOC is required. The EOC signal is transmitted to the measurement server. The function of the measurement server is to perform the time critical tasks such as signal filtering, control of the robot operation and fast movement interrupts. The Light Beam used is for probe alignment. This improves the (absolute) accuracy of the probe positioning. A computer running WinXP or Win7 and the DASY5 software. Remote control and teach pendant as well as additional circuitry for robot safety such as warning lamps, etc. The phantom, the device holder and other accessories according to the targeted measurement. Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 11 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report 7.1 E-Field Probe Report No. : FA961801 The SAR measurement is conducted with the dosimetric probe (manufactured by SPEAG).The probe is specially designed and calibrated for use in liquid with high permittivity. The dosimetric probe has special calibration in liquid at different frequency. This probe has a built in optical surface detection system to prevent from collision with phantom.
<EX3DV4 Probe>
Construction Frequency Directivity Dynamic Range Dimensions Symmetric design with triangular core Built-in shielding against static charges PEEK enclosure material (resistant to organic solvents, e.g., DGBE) 10 MHz >6 GHz Linearity: 0.2 dB (30 MHz 6 GHz) 0.3 dB in TSL (rotation around probe axis) 0.5 dB in TSL (rotation normal to probe axis) 10 W/g >100 mW/g Linearity: 0.2 dB (noise: typically <1 W/g) Overall length: 337 mm (tip: 20 mm) Tip diameter: 2.5 mm (body: 12 mm) Typical distance from probe tip to dipole centers: 1 mm 7.2 Data Acquisition Electronics (DAE) The data acquisition electronics (DAE) consists of a highly sensitive electrometer-grade preamplifier with auto-zeroing, a channel and gain-switching multiplexer, a fast 16 bit AD-converter and a command decoder and control logic unit. Transmission to the measurement server is accomplished through an optical downlink for data and status information as well as an optical uplink for commands and the clock. The input impedance of the DAE is 200 MOhm; the inputs are symmetrical and floating. Common mode rejection is above 80 dB. Photo of DAE Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 12 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report Report No. : FA961801 7.3 Phantom
<SAM Twin Phantom>
Shell Thickness Filling Volume Dimensions 2 0.2 mm;
Center ear point: 6 0.2 mm Approx. 25 liters Length: 1000 mm; Width: 500 mm; Height:
adjustable feet Measurement Areas Left Hand, Right Hand, Flat Phantom The bottom plate contains three pair of bolts for locking the device holder. The device holder positions are adjusted to the standard measurement positions in the three sections. A white cover is provided to tap the phantom during off-periods to prevent water evaporation and changes in the liquid parameters. On the phantom top, three reference markers are provided to identify the phantom position with respect to the robot.
<ELI Phantom>
Shell Thickness Filling Volume 2 0.2 mm (sagging: <1%) Approx. 30 liters Dimensions Major ellipse axis: 600 mm Minor axis: 400 mm The ELI phantom is intended for compliance testing of handheld and body-mounted wireless devices in the frequency range of 30 MHz to 6 GHz. ELI4 is fully compatible with standard and all known tissue simulating liquids. Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 13 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report 7.4 Device Holder
<Mounting Device for Hand-Held Transmitter>
Report No. : FA961801 In combination with the Twin SAM V5.0/V5.0c or ELI phantoms, the Mounting Device for Hand-Held Transmitters enables rotation of the mounted transmitter device to specified spherical coordinates. At the heads, the rotation axis is at the ear opening. Transmitter devices can be easily and accurately positioned according to IEC 62209-1, IEEE 1528, FCC, or other specifications. The device holder can be locked for positioning at different phantom sections (left head, right head, flat). And upgrade kit to Mounting Device to enable easy mounting of wider devices like big smart-phones, e-books, small tablets, etc. It holds devices with width up to 140 mm. Mounting Device for Hand-Held Transmitters Mounting Device Adaptor for Wide-Phones
<Mounting Device for Laptops and other Body-Worn Transmitters>
The extension is lightweight and made of POM, acrylic glass and foam. It fits easily on the upper part of the mounting device in place of the phone positioned. The extension is fully compatible with the SAM Twin and ELI phantoms. Mounting Device for Laptops Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 14 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report 8. Measurement Procedures The measurement procedures are as follows:
Report No. : FA961801
<Conducted power measurement>
(a) For WWAN power measurement, use base station simulator to configure EUT WWAN transmission in conducted connection with RF cable, at maximum power in each supported wireless interface and frequency band.
(b) Read the WWAN RF power level from the base station simulator.
(c) For WLAN/BT power measurement, use engineering software to configure EUT WLAN/BT continuously transmission, at maximum RF power in each supported wireless interface and frequency band
(d) Connect EUT RF port through RF cable to the power meter, and measure WLAN/BT output power
<SAR measurement>
(a) Use base station simulator to configure EUT WWAN transmission in radiated connection, and engineering software to configure EUT WLAN/BT continuously transmission, at maximum RF power, in the highest power channel.
(b) Place the EUT in the positions as Appendix D demonstrates.
(c) Set scan area, grid size and other setting on the DASY software.
(d) Measure SAR results for the highest power channel on each testing position.
(e) Find out the largest SAR result on these testing positions of each band
(f) Measure SAR results for other channels in worst SAR testing position if the reported SAR of highest power channel is larger than 0.8 W/kg According to the test standard, the recommended procedure for assessing the peak spatial-average SAR value consists of the following steps:
(a) Power reference measurement
(b) Area scan
(c) Zoom scan
(d) Power drift measurement 8.1 Spatial Peak SAR Evaluation The procedure for spatial peak SAR evaluation has been implemented according to the test standard. It can be conducted for 1g and 10g, as well as for user-specific masses. The DASY software includes all numerical procedures necessary to evaluate the spatial peak SAR value. The base for the evaluation is a "cube" measurement. The measured volume must include the 1g and 10g cubes with the highest averaged SAR values. For that purpose, the center of the measured volume is aligned to the interpolated peak SAR value of a previously performed area scan. The entire evaluation of the spatial peak values is performed within the post-processing engine (SEMCAD). The system always gives the maximum values for the 1g and 10g cubes. The algorithm to find the cube with highest averaged SAR is divided into the following stages:
(a) Extraction of the measured data (grid and values) from the Zoom Scan
(b) Calculation of the SAR value at every measurement point based on all stored data (A/D values and measurement parameters) Interpolation of all measured values form the measurement grid to the high-resolution grid
(c) Generation of a high-resolution mesh within the measured volume
(d)
(e) Extrapolation of the entire 3-D field distribution to the phantom surface over the distance from sensor to surface
(f) Calculation of the averaged SAR within masses of 1g and 10g Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 15 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report 8.2 Power Reference Measurement Report No. : FA961801 The Power Reference Measurement and Power Drift Measurements are for monitoring the power drift of the device under test in the batch process. The minimum distance of probe sensors to surface determines the closest measurement point to phantom surface. This distance cannot be smaller than the distance of sensor calibration points to probe tip as defined in the probe properties. 8.3 Area Scan The area scan is used as a fast scan in two dimensions to find the area of high field values, before doing a fine measurement around the hot spot. The sophisticated interpolation routines implemented in DASY software can find the maximum found in the scanned area, within a range of the global maximum. The range (in dB0 is specified in the standards for compliance testing. For example, a 2 dB range is required in IEEE standard 1528 and IEC 62209 standards, whereby 3 dB is a requirement when compliance is assessed in accordance with the ARIB standard (Japan), if only one zoom scan follows the area scan, then only the absolute maximum will be taken as reference. For cases where multiple maximums are detected, the number of zoom scans has to be increased accordingly. Area scan parameters extracted from FCC KDB 865664 D01v01r04 SAR measurement 100 MHz to 6 GHz. Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 16 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report 8.4 Zoom Scan Report No. : FA961801 Zoom scans are used assess the peak spatial SAR values within a cubic averaging volume containing 1 gram and 10 gram of simulated tissue. The zoom scan measures points (refer to table below) within a cube shoes base faces are centered on the maxima found in a preceding area scan job within the same procedure. When the measurement is done, the zoom scan evaluates the averaged SAR for 1 gram and 10 gram and displays these values next to the jobs label. Zoom scan parameters extracted from FCC KDB 865664 D01v01r04 SAR measurement 100 MHz to 6 GHz. 8.5 Volume Scan Procedures The volume scan is used for assess overlapping SAR distributions for antennas transmitting in different frequency bands. It is equivalent to an oversized zoom scan used in standalone measurements. The measurement volume will be used to enclose all the simultaneous transmitting antennas. For antennas transmitting simultaneously in different frequency bands, the volume scan is measured separately in each frequency band. In order to sum correctly to compute the 1g aggregate SAR, the EUT remain in the same test position for all measurements and all volume scan use the same spatial resolution and grid spacing. When all volume scan were completed, the software, SEMCAD postprocessor can combine and subsequently superpose these measurement data to calculating the multiband SAR. 8.6 Power Drift Monitoring All SAR testing is under the EUT install full charged battery and transmit maximum output power. In DASY measurement software, the power reference measurement and power drift measurement procedures are used for monitoring the power drift of EUT during SAR test. Both these procedures measure the field at a specified reference position before and after the SAR testing. The software will calculate the field difference in dB. If the power drifts more than 5%, the SAR will be retested. Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 17 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 Radio communication analyzer MT8820C 6201300653 Jul. 18, 2018 Jul. 17, 2019 Radio communication analyzer MT8821C 6201588572 Dec. 22, 2018 Dec. 21, 2019 FCC SAR Test Report 9. Test Equipment List Manufacturer Name of Equipment Type/Model Serial Number SPEAG SPEAG 750MHz System Validation Kit 835MHz System Validation Kit SPEAG 1750MHz System Validation Kit SPEAG 1900MHz System Validation Kit D750V3 D835V2 D1750V2 D1900V2 SPEAG 2450MHz System Validation Kit D2450V2 SPEAG 5000MHz System Validation Kit D5GHzV2 Data Acquisition Electronics Dosimetric E-Field Probe SAM Twin Phantom Phone Positioner DAE4 EX3DV4 SAM V5.0 N/A SPEAG SPEAG SPEAG SPEAG Anritsu Anritsu Agilent Wireless Communication Test Set Agilent Speag Agilent Anritsu Anritsu Anritsu Anritsu R&S R&S Network Analyzer Dielectric Assessment KIT Signal Generator Power Senor Power Meter Power Sensor Power Meter CBT BLUETOOTH TESTER Spectrum Analyzer LKM electronic Hygrometer Anymetre Thermo-Hygrometer ARRA Power Divider E5515C E5071C DAK-3.5 N5181A MA2411B ML2495A MA2411B ML2495A CBT FSP7 DTM3000 JR593 A3200-2 PASTERNACK Dual Directional Coupler PE2214-10 Dual Directional Coupler 778D Agilent MCL Weinschel Zhongjilianhe AR mini-circuits Attenuation1 Attenuation2 Attenuation3 Amplifier Amplifier Report No. : FA961801 Calibration Last Cal. Due Date Dec. 06, 2018 Dec. 05, 2019 Dec. 05, 2018 Dec. 04, 2019 Jul. 30, 2018 Jul. 29, 2019 Dec. 07, 2018 Dec. 06, 2019 Apr. 15, 2019 Apr. 14, 2020 Aug. 03, 2018 Aug. 02, 2019 Jan. 23, 2019 Jan. 22, 2020 Mar. 01, 2019 Feb. 29, 2020 NCR NCR NCR NCR 1099 4d162 1137 5d182 924 1167 715 3819 1795 N/A MY50267224 Sep. 11, 2018 Sep. 10, 2019 MY46523671 Oct. 18, 2018 Oct. 17, 2019 1071 Nov. 20, 2018 Nov. 19, 2019 MY50145381 Dec. 22, 2018 Dec. 21, 2019 1306099 1349001 Jul. 30, 2018 Jul. 29, 2019 Jul. 26, 2018 Jul. 25, 2019 1207253 Dec. 22, 2018 Dec. 21, 2019 1218010 Dec. 22, 2018 Dec. 21, 2019 100963 100818 3241 Dec. 22, 2018 Dec. 21, 2019 Jul. 18, 2018 Jul. 17, 2019 Aug. 10, 2018 Aug. 09, 2019 2015102801 Dec. 22, 2018 Dec. 21, 2019 N/A N/A 50422 N/A N/A N/A BW-S10W5 3M-20 MVE2214-03 5S1G4 0333096 ZVE-3W-83+
599201528 Note Note Note Note Note Note Note Note Note: Prior to system verification and validation, the path loss from the signal generator to the system check source and the power meter, which includes the amplifier, cable, attenuator and directional coupler, was measured by the network analyzer. The reading of the power meter was offset by the path loss difference between the path to the power meter and the path to the system check source to monitor the actual power level fed to the system check source. Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 18 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report 10. System Verification 10.1 Tissue Simulating Liquids Report No. : FA961801 For the measurement of the field distribution inside the SAM phantom with DASY, the phantom must be filled with around 25 liters of homogeneous body tissue simulating liquid. For body SAR testing, the liquid height from the center of the flat phantom to the liquid top surface is larger than 15 cm, which is shown in Fig. 10.1. Fig 10.1 Photo of Liquid Height for Body SAR Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 19 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report 10.2 Tissue Verification Report No. : FA961801 The following tissue formulations are provided for reference only as some of the parameters have not been thoroughly verified. The composition of ingredients may be modified accordingly to achieve the desired target tissue parameters required for routine SAR evaluation. Frequency
(MHz) Water
(%) Sugar
(%) Cellulose
(%) Salt
(%) Preventol
(%) DGBE
(%) 750 835 1800, 1900, 2000 2450 41.1 40.3 55.2 55.0 57.0 57.9 0 0 0.2 0.2 0 0 For Head 1.4 1.4 0.3 0 0.2 0.2 0 0 0 0 44.5 45.0 Conductivity Permittivity
() 0.89 0.90 1.40 1.80
(r) 41.9 41.5 40.0 39.2 Simulating Liquid for 5GHz, Manufactured by SPEAG Ingredients Water Mineral oil Emulsifiers Additives and Salt
(% by weight) 64~78%
11~18%
9~15%
2~3%
<Tissue Dielectric Parameter Check Results>
Frequency
(MHz) Tissue Type Liquid Temp.
() Head 22.6 Head 22.6 Head 22.7 Head 22.4 Head 22.7 Head 22.5 Head 22.6 Head 22.8 750 835 1750 1900 2450 5250 5600 5750 Conductivit y
() 0.886 0.902 1.378 1.445 1.732 4.597 5.004 5.173 Permittivity
(r) Conductivi Permittivit ty y Target () Target (r) Delta ()
(%) Delta
(r)
(%) Limit
(%) Date 41.532 40.749 41.340 40.021 40.764 36.629 36.093 35.826 0.89 0.90 1.37 1.40 1.80 4.71 5.07 5.22 41.90 41.50 40.10 40.00 39.20 35.95 35.50 35.35
-0.45
-0.88 0.22 0.58 3.21
-3.78
-2.40
-1.30
-0.90
-1.81 3.09 0.05 3.99 1.89 1.67 1.35 5 5 5 5 5 5 5 5 2019/7/7 2019/7/7 2019/7/6 2019/7/5 2019/7/11 2019/7/11 2019/7/12 2019/7/12 Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 20 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report 10.3 System Performance Check Results Report No. : FA961801 Comparing to the original SAR value provided by SPEAG, the verification data should be within its specification of 10 %. Below table shows the target SAR and measured SAR after normalized to 1W input power. The table below indicates the system performance check can meet the variation criterion and the plots can be referred to Appendix A of this report. Date Frequency
(MHz) Tissue Type Input Power
(mW) Dipole S/N Probe S/N DAE S/N Measured 1g SAR
(W/kg) Targeted 1g SAR
(W/kg) Normalized 1g SAR
(W/kg) Deviation
(%) 2019/7/7 2019/7/7 2019/7/6 2019/7/5 750 835 1750 1900 2019/7/11 2450 2019/7/11 5250 2019/7/12 5600 2019/7/12 5750 Head Head Head Head Head Head Head Head 250 250 250 250 250 100 100 100 1099 3819 4d162 3819 1137 3819 5d182 3819 924 1167 1167 1167 3819 3819 3819 3819 715 715 715 715 715 715 715 715 2.11 2.53 9.05 10.30 13.10 7.79 7.83 7.87 8.52 9.61 36.50 39.60 52.10 77.00 80.80 76.90 8.44 10.12 36.2 41.2 52.4 77.9 78.3 78.7
-0.94 5.31
-0.82 4.04 0.58 1.17
-3.09 2.34 Fig 10.3.1 System Performance Check Setup Fig 10.3.2 Setup Photo Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 21 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report 11. RF Exposure Positions 11.1 SAR Testing for Tablet
(a) To position the device parallel to the phantom surface with either keypad up or down.
(b) To adjust the device parallel to the flat phantom.
(c) To adjust the distance between the device surface and the flat phantom to 0 cm. Please refer to Appendix D for the test setup photos. Report No. : FA961801 Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 22 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report Report No. : FA961801 12. Conducted RF Output Power (Unit: dBm)
<GSM Conducted Power>
General Note:
1. 2. Per KDB 447498 D01v06, the maximum output power channel is used for SAR testing and for further SAR test reduction. Per KDB 941225 D01v03r01, for SAR test reduction for GSM / GPRS / EDGE modes is determined by the source-based time-averaged output power including tune-up tolerance. The mode with highest specified time-averaged output power should be tested for SAR compliance in the applicable exposure conditions. For modes with the same specified maximum output power and tolerance, the higher number time-slot configuration should be tested. Therefore, the GPRS (3Tx slots) for GSM850 and the GPRS (4Tx slots) for GSM1900 is considered as the primary mode. 3. Other configurations of GSM / GPRS / EDGE are considered as secondary modes. The 3G SAR test reduction procedure is applied, when the maximum output power and tune-up tolerance specified for production units in a secondary mode is dB higher than the primary mode, SAR measurement is not required for the secondary mode. GSM850 Tx Channel Burst Average Power (dBm) 128 189 251 Frequency (MHz) 824.2 836.4 848.8 Tune-up Limit
(dBm) Frame-Average Power (dBm) 128 189 251 824.2 836.4 848.8 Tune-up Limit
(dBm) GPRS 1 Tx slot GPRS 2 Tx slots GPRS 3 Tx slots GPRS 4 Tx slots EDGE 1 Tx slot EDGE 2 Tx slots EDGE 3 Tx slots EDGE 4 Tx slots GSM1900 Tx Channel Frequency (MHz) GPRS 1 Tx slot GPRS 2 Tx slots GPRS 3 Tx slots GPRS 4 Tx slots EDGE 1 Tx slot EDGE 2 Tx slots EDGE 3 Tx slots EDGE 4 Tx slots 30.68 30.72 30.78 32.50 21.68 21.72 21.78 23.50 29.45 29.41 29.55 31.00 23.45 23.41 23.55 25.00 28.28 28.24 28.26 29.50 24.02 23.98 24.00 25.24 27.05 26.89 26.95 28.00 24.05 23.89 23.95 25.00 26.16 26.08 26.12 26.50 17.16 17.08 17.12 17.50 26.08 25.95 26.05 26.50 20.08 19.95 20.05 20.50 25.92 25.84 25.92 26.50 21.66 21.58 21.66 22.24 25.74 25.78 25.79 26.50 22.74 22.78 22.79 23.50 Burst Average Power (dBm) 512 1850.2 28.03 27.19 24.55 24.61 24.57 24.41 23.86 23.31 661 1880 28.01 26.85 24.15 24.27 24.24 24.09 23.67 22.98 810 1909.8 27.57 26.39 23.95 24.10 24.01 23.84 23.26 22.61 Tune-up Limit
(dBm) 29.00 27.50 25.00 25.00 25.00 25.00 24.50 24.00 Frame-Average Power (dBm) 512 1850.2 19.03 21.19 20.29 21.61 15.57 18.41 19.60 20.31 661 1880 19.01 20.85 19.89 21.27 15.24 18.09 19.41 19.98 810 1909.8 18.57 20.39 19.69 21.10 15.01 17.84 19.00 19.61 Tune-up Limit
(dBm) 20.00 21.50 20.74 22.00 16.00 19.00 20.24 21.00 Remark: The frame-averaged power is linearly scaled the maximum burst averaged power over 8 time slots. The calculated method are shown as below:
Frame-averaged power = Maximum burst averaged power (1 Tx Slot) - 9 dB Frame-averaged power = Maximum burst averaged power (2 Tx Slots) - 6 dB Frame-averaged power = Maximum burst averaged power (3 Tx Slots) - 4.26 dB Frame-averaged power = Maximum burst averaged power (4 Tx Slots) - 3 dB Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 23 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report
<LTE Conducted Power>
General Note:
Report No. : FA961801 1. Anritsu MT8820C base station simulator was used to setup the connection with EUT; the frequency band, channel bandwidth, RB allocation configuration, modulation type are set in the base station simulator to configure EUT transmitting at maximum power and at different configurations which are requested to be reported to FCC, for conducted power measurement and SAR testing. 2. Per KDB 941225 D05v02r05, when a properly configured base station simulator is used for the SAR and power measurements, spectrum plots for each RB allocation and offset configuration is not required. 3. Per KDB 941225 D05v02r05, start with the largest channel bandwidth and measure SAR for QPSK with 1 RB allocation, using the RB offset and required test channel combination with the highest maximum output power for RB offsets at the upper edge, middle and lower edge of each required test channel. 4. Per KDB 941225 D05v02r05, 50% RB allocation for QPSK SAR testing follows 1RB QPSK allocation procedure. 5. Per KDB 941225 D05v02r05, for QPSK with 100% RB allocation, SAR is not required when the highest maximum output power for 100 % RB allocation is less than the highest maximum output power in 50% and 1 RB allocations and the highest reported SAR for 1 RB and 50% RB allocation are 0.8 W/kg. Otherwise, SAR is measured for the highest output power channel; and if the reported SAR is > 1.45 W/kg, the remaining required test channels must also be tested. 6. Per KDB 941225 D05v02r05, 16QAM output power for each RB allocation configuration is > not dB higher than the same configuration in QPSK and the reported SAR for the QPSK configuration is 1.45 W/kg; Per KDB 941225 D05v02r05, 16QAM SAR testing is not required. 7. Per KDB 941225 D05v02r05, smaller bandwidth output power for each RB allocation configuration is > not dB higher than the same configuration in the largest supported bandwidth, and the reported SAR for the largest supported bandwidth is 1.45 W/kg; Per KDB 941225 D05v02r05, smaller bandwidth SAR testing is not required. 8. For LTE B4 / B5 / B12 the maximum bandwidth does not support three non-overlapping channels, per KDB 941225 D05v02r05, when a device supports overlapping channel assignment in a channel bandwidth configuration, the middle channel of the group of overlapping channels should be selected for testing. Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 24 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report
<LTE Band 2>
BW
[MHz]
Modulation RB Size RB Offset Index Channel Frequency (MHz) QPSK QPSK QPSK QPSK QPSK 16QAM 16QAM 16QAM 16QAM 16QAM 1 1 3 3 6 1 1 3 3 6 Channel Frequency (MHz) QPSK QPSK QPSK QPSK QPSK 16QAM 16QAM 16QAM 16QAM 16QAM 1 1 3 3 6 1 1 3 3 6 Channel Frequency (MHz) QPSK QPSK QPSK QPSK QPSK 16QAM 16QAM 16QAM 16QAM 16QAM 1 1 3 3 6 1 1 3 3 6 20 20 20 20 20 20 20 20 20 20 15 15 15 15 15 15 15 15 15 15 10 10 10 10 10 10 10 10 10 10 L 0 0 0 0 0 0 0 0 0 0 L 0 0 0 0 0 0 0 0 0 0 L 0 0 0 0 0 0 0 0 0 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Report No. : FA961801 Power Low Ch. /
Freq. 18700 Power Middle Ch. /
Freq. 18900 Power High Ch. /
Freq. 19100 1860 1880 1900 22.36 22.37 22.78 22.45 22.34 22.66 22.59 22.44 22.71 Tune-up limit
(dBm) MPR
(dB) 23.00 0.00 22.45 22.28 22.48 23.00 0.00 22.41 22.27 22.42 22.64 22.36 22.67 22.58 22.27 22.56 22.59 22.33 22.74 23.00 0.00 22.44 22.41 22.64 23.00 0.00 22.47 22.26 22.54 M H 0 0 0 0 0 0 0 0 0 0 15 15 15 15 15 15 15 15 15 15 M H 18675 18900 19125 1857.5 1880 1902.5 Tune-up limit
(dBm) MPR
(dB) 0 0 0 0 0 0 0 0 0 0 11 11 11 11 11 11 11 11 11 11 22.54 22.25 22.74 22.46 22.23 22.66 22.48 22.24 22.54 23.00 0.00 22.44 22.25 22.64 23.00 0.00 22.41 22.23 22.49 22.71 22.45 22.71 22.49 22.23 22.69 22.73 22.28 22.61 23.00 0.00 22.45 22.21 22.64 23.00 0.00 22.52 22.41 22.71 M H 18650 18900 19150 1855 1880 1905 Tune-up limit
(dBm) MPR
(dB) 0 0 0 0 0 0 0 0 0 0 7 7 7 7 7 7 7 7 7 7 22.51 22.35 22.61 22.50 22.30 22.54 22.48 22.38 22.54 23.00 0.00 22.56 22.31 22.68 23.00 0.00 21.98 21.73 21.99 22.54 22.47 22.56 22.64 22.41 22.41 22.51 22.16 22.56 23.00 0.00 22.43 22.21 22.45 23.00 0.00 21.48 21.29 21.42 Page 25 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 3 3 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 FCC SAR Test Report Report No. : FA961801 Channel Frequency (MHz) QPSK QPSK QPSK QPSK QPSK 16QAM 16QAM 16QAM 16QAM 16QAM 1 1 3 3 6 1 1 3 3 6 Channel Frequency (MHz) QPSK QPSK QPSK QPSK QPSK 16QAM 16QAM 16QAM 16QAM 16QAM 1 1 3 3 6 1 1 3 3 6 Channel Frequency (MHz) QPSK QPSK QPSK QPSK QPSK 16QAM 16QAM 16QAM 16QAM 16QAM 1 1 3 3 6 1 1 3 3 6 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 L 0 0 0 0 0 0 0 0 0 0 L 0 0 0 0 0 0 0 0 0 0 L 0 0 0 0 0 0 0 0 0 0 M H 18625 18900 19175 1852.5 1880 1907.5 Tune-up limit
(dBm) MPR
(dB) 0 0 0 0 0 0 0 0 0 0 3 3 3 3 3 3 3 3 3 3 22.50 22.32 22.61 22.45 22.30 22.51 22.43 22.31 22.44 23.00 0.00 22.53 22.29 22.62 23.00 0.00 21.88 21.70 21.92 22.44 22.42 22.51 22.60 22.39 22.33 22.50 22.11 22.50 23.00 0.00 22.39 22.21 22.43 23.00 0.00 21.42 21.23 21.40 M H 18615 18900 19185 1851.5 1880 1908.5 Tune-up limit
(dBm) MPR
(dB) 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 22.38 22.25 22.58 22.41 22.29 22.42 22.37 22.28 22.42 23.00 0.00 22.28 22.30 22.57 23.00 0.00 21.69 21.60 21.83 22.33 22.38 22.46 22.30 22.29 22.27 22.37 22.12 22.41 23.00 0.00 22.26 22.16 22.34 23.00 0.00 21.34 21.23 21.34 M H 18607 18900 19193 1850.7 1880 1909.3 Tune-up limit
(dBm) MPR
(dB) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 22.46 22.29 22.54 22.44 22.20 22.44 22.40 22.32 22.38 23.00 0.00 22.27 22.24 22.53 23.00 0.00 21.69 21.61 21.86 22.30 22.34 22.51 22.32 22.38 22.32 22.41 22.10 22.51 23.00 0.00 22.31 22.20 22.40 23.00 0.00 21.32 21.22 21.32 Page 26 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE FCC SAR Test Report
<LTE Band 4>
BW
[MHz]
Modulation RB Size RB Offset Index Channel Frequency (MHz) QPSK QPSK QPSK QPSK QPSK 16QAM 16QAM 16QAM 16QAM 16QAM 1 1 3 3 6 1 1 3 3 6 Channel Frequency (MHz) QPSK QPSK QPSK QPSK QPSK 16QAM 16QAM 16QAM 16QAM 16QAM 1 1 3 3 6 1 1 3 3 6 Channel Frequency (MHz) QPSK QPSK QPSK QPSK QPSK 16QAM 16QAM 16QAM 16QAM 16QAM 1 1 3 3 6 1 1 3 3 6 20 20 20 20 20 20 20 20 20 20 15 15 15 15 15 15 15 15 15 15 10 10 10 10 10 10 10 10 10 10 L 0 0 0 0 0 0 0 0 0 0 L 0 0 0 0 0 0 0 0 0 0 L 0 0 0 0 0 0 0 0 0 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Report No. : FA961801 Power Low Ch. /
Freq. 20050 Power Middle Ch. /
Freq. 20175 Power High Ch. /
Freq. 20300 1720 1732.5 1745 22.41 22.60 22.31 22.19 22.29 22.12 22.26 22.31 22.21 Tune-up limit
(dBm) MPR
(dB) 23.00 0.00 22.23 22.24 22.23 23.00 0.00 22.17 22.33 22.31 22.41 22.48 22.19 22.32 22.59 22.24 22.34 22.31 22.11 23.00 0.00 22.27 22.44 22.21 23.00 0.00 22.47 22.31 22.31 M H 0 0 0 0 0 0 0 0 0 0 15 15 15 15 15 15 15 15 15 15 M H 20025 20175 20325 1717.5 1732.5 1747.5 Tune-up limit
(dBm) MPR
(dB) 0 0 0 0 0 0 0 0 0 0 11 11 11 11 11 11 11 11 11 11 22.23 21.94 22.43 22.15 21.92 22.35 22.17 21.93 22.23 23.00 0.00 22.13 21.94 22.33 23.00 0.00 22.10 21.92 22.18 22.40 22.14 22.40 22.18 21.92 22.38 22.42 21.97 22.30 23.00 0.00 22.14 21.90 22.33 23.00 0.00 22.21 22.10 22.40 M H 20000 20175 20350 1715 1732.5 1750 Tune-up limit
(dBm) MPR
(dB) 0 0 0 0 0 0 0 0 0 0 7 7 7 7 7 7 7 7 7 7 21.96 22.00 22.31 22.08 22.08 22.23 22.02 22.01 22.22 23.00 0.00 22.11 22.19 22.27 23.00 0.00 21.41 21.46 21.74 22.24 22.33 22.21 22.17 22.29 22.31 22.04 22.08 22.15 23.00 0.00 22.15 22.19 22.31 23.00 0.00 21.06 21.03 21.08 Page 27 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report Report No. : FA961801 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 3 3 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 Channel Frequency (MHz) QPSK QPSK QPSK QPSK QPSK 16QAM 16QAM 16QAM 16QAM 16QAM 1 1 3 3 6 1 1 3 3 6 Channel Frequency (MHz) QPSK QPSK QPSK QPSK QPSK 16QAM 16QAM 16QAM 16QAM 16QAM 1 1 3 3 6 1 1 3 3 6 Channel Frequency (MHz) QPSK QPSK QPSK QPSK QPSK 16QAM 16QAM 16QAM 16QAM 16QAM 1 1 3 3 6 1 1 3 3 6 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 L 0 0 0 0 0 0 0 0 0 0 L 0 0 0 0 0 0 0 0 0 0 L 0 0 0 0 0 0 0 0 0 0 Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE M H 19975 20175 20375 1712.5 1732.5 1752.5 Tune-up limit
(dBm) MPR
(dB) 0 0 0 0 0 0 0 0 0 0 3 3 3 3 3 3 3 3 3 3 22.08 22.11 22.27 22.02 22.07 22.25 21.45 21.64 21.66 23.00 0.00 21.43 21.49 21.71 23.00 0.00 21.34 21.41 21.68 22.17 22.31 22.47 22.14 22.28 22.41 21.54 21.54 21.69 23.00 0.00 21.51 21.57 21.70 23.00 0.00 21.00 20.96 21.15 M H 19965 20175 20385 1711.5 1732.5 1753.5 Tune-up limit
(dBm) MPR
(dB) 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 22.05 22.09 22.26 21.97 22.02 22.23 21.40 21.63 21.59 23.00 0.00 21.40 21.39 21.64 23.00 0.00 21.30 21.39 21.63 22.15 22.23 22.42 22.09 22.21 22.41 21.48 21.55 21.65 23.00 0.00 21.41 21.49 21.61 23.00 0.00 21.01 20.91 21.07 M H 19957 20175 20393 1710.7 1732.5 1754.3 Tune-up limit
(dBm) MPR
(dB) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 22.02 22.11 22.21 21.99 22.03 22.26 21.43 21.60 21.60 23.00 0.00 21.37 21.44 21.64 23.00 0.00 21.33 21.42 21.61 22.13 22.31 22.42 22.05 22.26 22.36 21.50 21.55 21.65 23.00 0.00 21.50 21.51 21.67 23.00 0.00 20.96 20.93 21.14 Page 28 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report
<LTE Band 5>
BW
[MHz]
Modulation RB Size RB Offset Index Channel Frequency (MHz) QPSK QPSK QPSK QPSK QPSK 16QAM 16QAM 16QAM 16QAM 16QAM 1 1 3 3 6 1 1 3 3 6 Channel Frequency (MHz) QPSK QPSK QPSK QPSK QPSK 16QAM 16QAM 16QAM 16QAM 16QAM 1 1 3 3 6 1 1 3 3 6 Channel Frequency (MHz) QPSK QPSK QPSK QPSK QPSK 16QAM 16QAM 16QAM 16QAM 16QAM 1 1 3 3 6 1 1 3 3 6 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 3 3 L 0 0 0 0 0 0 0 0 0 0 L 0 0 0 0 0 0 0 0 0 0 L 0 0 0 0 0 0 0 0 0 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Report No. : FA961801 Power Low Ch. /
Freq. 20450 Power Middle Ch. /
Freq. 20525 Power High Ch. /
Freq. 20600 829 836.5 844 22.65 22.55 22.77 22.75 22.59 22.96 22.62 22.55 22.76 Tune-up limit
(dBm) MPR
(dB) 23.50 0.00 22.57 22.59 22.73 23.50 0.00 22.08 21.88 22.12 22.87 22.75 22.95 22.88 22.83 22.90 22.70 22.55 22.80 23.50 0.00 22.65 22.63 22.62 23.50 0.00 21.69 21.54 21.66 M H 0 0 0 0 0 0 0 0 0 0 7 7 7 7 7 7 7 7 7 7 M H 20425 20525 20625 826.5 836.5 846.5 Tune-up limit
(dBm) MPR
(dB) 0 0 0 0 0 0 0 0 0 0 3 3 3 3 3 3 3 3 3 3 22.73 22.66 22.76 22.77 22.61 22.67 22.24 22.08 22.21 23.50 0.00 22.21 22.01 22.19 23.50 0.00 22.09 22.00 22.11 22.83 22.78 22.89 22.86 22.88 22.92 22.16 22.06 22.12 23.50 0.00 22.09 22.12 22.21 23.50 0.00 21.60 21.64 21.70 M H 20415 20525 20635 825.5 836.5 847.5 Tune-up limit
(dBm) MPR
(dB) 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 22.62 22.56 22.73 22.74 22.52 22.81 22.63 22.46 22.75 23.50 0.00 22.48 22.51 22.68 23.50 0.00 21.99 21.78 22.08 22.77 22.67 22.92 22.89 22.75 22.81 22.64 22.45 22.77 23.50 0.00 22.60 22.64 22.62 23.50 0.00 21.59 21.55 21.66 Page 29 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 FCC SAR Test Report Report No. : FA961801 Channel Frequency (MHz) QPSK QPSK QPSK QPSK QPSK 16QAM 16QAM 16QAM 16QAM 16QAM 1 1 3 3 6 1 1 3 3 6 0 5 0 3 0 0 5 0 3 0 M H 20407 20525 20643 824.7 836.5 848.3 Tune-up limit
(dBm) MPR
(dB) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 22.58 22.45 22.67 22.69 22.56 22.83 22.58 22.45 22.66 23.50 0.00 22.49 22.51 22.68 23.50 0.00 22.04 21.79 22.11 22.81 22.68 22.86 22.84 22.83 22.91 22.71 22.51 22.74 23.50 0.00 22.60 22.61 22.52 23.50 0.00 21.65 21.50 21.56 L 0 0 0 0 0 0 0 0 0 0 Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 30 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report
<LTE Band 12>
BW
[MHz]
Modulation RB Size RB Offset Index Channel Frequency (MHz) QPSK QPSK QPSK QPSK QPSK 16QAM 16QAM 16QAM 16QAM 16QAM 1 1 3 3 6 1 1 3 3 6 Channel Frequency (MHz) QPSK QPSK QPSK QPSK QPSK 16QAM 16QAM 16QAM 16QAM 16QAM 1 1 3 3 6 1 1 3 3 6 Channel Frequency (MHz) QPSK QPSK QPSK QPSK QPSK 16QAM 16QAM 16QAM 16QAM 16QAM 1 1 3 3 6 1 1 3 3 6 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 3 3 L 0 0 0 0 0 0 0 0 0 0 L 0 0 0 0 0 0 0 0 0 0 L 0 0 0 0 0 0 0 0 0 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Report No. : FA961801 Power Low Ch. /
Freq. 23060 Power Middle Ch. /
Freq. 23095 Power High Ch. /
Freq. 23130 704 707.5 711 22.31 22.30 22.16 22.51 22.32 22.28 22.41 22.38 22.28 Tune-up limit
(dBm) MPR
(dB) 23.00 0.00 22.25 22.24 22.23 23.00 0.00 21.75 21.56 21.50 22.29 22.27 22.22 22.32 22.37 22.32 22.34 22.25 22.27 23.00 0.00 22.37 22.50 22.21 23.00 0.00 21.40 21,42 21.19 M H 0 0 0 0 0 0 0 0 0 0 7 7 7 7 7 7 7 7 7 7 M H 23035 23095 23155 701.5 707.5 713.5 Tune-up limit
(dBm) MPR
(dB) 0 0 0 0 0 0 0 0 0 0 3 3 3 3 3 3 3 3 3 3 22.23 22.28 22.15 22.23 22.35 22.09 22.29 21.79 21.59 23.00 0.00 22.14 21.64 21.56 23.00 0.00 21.68 21.82 21.61 22.22 22.29 22.35 22.24 22.35 22.39 22.32 21.77 21.65 23.00 0.00 22.31 21.92 21.56 23.00 0.00 21.32 21.33 21.11 M H 23025 23095 23165 700.5 707.5 714.5 Tune-up limit
(dBm) MPR
(dB) 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 22.19 22.23 22.17 22.28 22.16 22.19 22.25 22.30 22.19 23.00 0.00 22.15 22.24 22.22 23.00 0.00 21.70 21.46 21.44 22.23 22.24 22.19 22.22 22.35 22.31 22.33 22.23 22.22 23.00 0.00 22.37 22.44 22.13 23.00 0.00 21.39 22.43 21.14 Page 31 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 FCC SAR Test Report Report No. : FA961801 Channel Frequency (MHz) QPSK QPSK QPSK QPSK QPSK 16QAM 16QAM 16QAM 16QAM 16QAM 1 1 3 3 6 1 1 3 3 6 0 5 0 3 0 0 5 0 3 0 M H 23017 23095 23173 699.7 707.5 715.3 Tune-up limit
(dBm) MPR
(dB) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 22.19 22.29 22.13 22.22 22.20 22.14 22.29 22.36 22.23 23.00 0.00 22.23 22.21 22.23 23.00 0.00 21.73 21.52 21.44 22.28 22.22 22.20 22.33 22.33 22.22 22.31 22.21 22.27 23.00 0.00 22.38 22.43 22.11 23.00 0.00 21.39 22.37 21.17 L 0 0 0 0 0 0 0 0 0 0 Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 32 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report
<LTE Band 13>
BW
[MHz]
Modulation RB Size RB Offset Index Channel Frequency (MHz) QPSK QPSK QPSK QPSK QPSK 16QAM 16QAM 16QAM 16QAM 16QAM 1 1 3 3 6 1 1 3 3 6 Channel Frequency (MHz) QPSK QPSK QPSK QPSK QPSK 16QAM 16QAM 16QAM 16QAM 16QAM 1 1 3 3 6 1 1 3 3 6 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 L 0 0 0 0 0 0 0 0 0 0 L 0 0 0 0 0 0 0 0 0 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 Report No. : FA961801 Power Low Ch. /
Freq. Power Middle Ch. /
Freq. 23230 782 22.56 22.86 22.54 22.70 22.03 22.80 22.78 22.65 22.59 21.35 Power High Ch. /
Freq. Tune-up limit
(dBm) MPR
(dB) 23.00 0.00 23.00 0.00 23.00 0.00 23.00 0.00 M H 0 0 0 0 0 0 0 0 0 0 7 7 7 7 7 7 7 7 7 7 M H 23205 23230 23255 779.5 782 784.5 Tune-up limit
(dBm) MPR
(dB) 0 0 0 0 0 0 0 0 0 0 3 3 3 3 3 3 3 3 3 3 22.61 22.49 22.56 22.57 22.54 22.45 22,06 22.05 22.09 23.00 0.00 22.00 22.02 22.04 23.00 0.00 21.93 21.91 22.03 22.68 22.75 22.85 22.79 22.80 22.73 22.00 22.03 22.01 23.00 0.00 22.13 21.95 22.02 23.00 0.00 21.47 21.33 21.51 Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 33 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report Report No. : FA961801
<LTE Band 26>
BW
[MHz]
Modulation RB Size RB Offset Index Channel Frequency (MHz) QPSK QPSK QPSK QPSK QPSK 16QAM 16QAM 16QAM 16QAM 16QAM 1 1 3 3 6 1 1 3 3 6 Channel Frequency (MHz) QPSK QPSK QPSK QPSK QPSK 16QAM 16QAM 16QAM 16QAM 16QAM 1 1 3 3 6 1 1 3 3 6 15 15 15 15 15 15 15 15 15 15 10 10 10 10 10 10 10 10 10 10 L 0 0 0 0 0 0 0 0 0 0 L 0 0 0 0 0 0 0 0 0 0 M H 0 0 0 0 0 0 0 0 0 0 11 11 11 11 11 11 11 11 11 11 M H 0 0 0 0 0 0 0 0 0 0 7 7 7 7 7 7 7 7 7 7 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 Power Low Ch. /
Freq. 26765 Power Middle Ch. /
Freq. 26865 Power High Ch. /
Freq. 26965 821.5 831.5 841.5 22.47 22.79 22.39 22.45 22.48 22.36 22.60 22.71 22.42 Tune-up limit
(dBm) MPR
(dB) 23.50 0.00 22.45 22.55 22.33 23.50 0.00 22.44 22.50 22.31 22.68 22.78 22.56 22.64 22.69 22.55 22.50 22.56 22.30 23.50 0.00 22.46 22.37 22.28 23.50 0.00 22.55 22.58 22.42 26740 26865 26990 819 831.5 844 22.41 22.50 22.20 22.42 22.40 22.15 22.33 22.57 22.35 Tune-up limit
(dBm) MPR
(dB) 23.50 0.00 22.43 22.49 22.22 23.50 0.00 21.77 21.90 21.78 22.67 22.60 22.67 22.60 22.71 22.61 22.41 22.41 22.42 23.50 0.00 22.36 22.53 22.33 23.50 0.00 21.28 21.25 21.33 Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 34 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report Report No. : FA961801 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 3 3 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 Channel Frequency (MHz) QPSK QPSK QPSK QPSK QPSK 16QAM 16QAM 16QAM 16QAM 16QAM 1 1 3 3 6 1 1 3 3 6 Channel Frequency (MHz) QPSK QPSK QPSK QPSK QPSK 16QAM 16QAM 16QAM 16QAM 16QAM 1 1 3 3 6 1 1 3 3 6 Channel Frequency (MHz) QPSK QPSK QPSK QPSK QPSK 16QAM 16QAM 16QAM 16QAM 16QAM 1 1 3 3 6 1 1 3 3 6 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 L 0 0 0 0 0 0 0 0 0 0 L 0 0 0 0 0 0 0 0 0 0 L 0 0 0 0 0 0 0 0 0 0 Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE M H 26715 26865 27015 816.5 831.5 846.5 Tune-up limit
(dBm) MPR
(dB) 0 0 0 0 0 0 0 0 0 0 3 3 3 3 3 3 3 3 3 3 22.46 22.43 22.35 22.39 22.40 22.23 22.58 21.84 21.74 23.50 0.00 22.39 21.89 21.72 23.50 0.00 22.42 21.77 21.71 22.64 22.62 22.66 22.54 22.70 22.62 22.50 21.82 21.73 23.50 0.00 22.46 21.80 21.71 23.50 0.00 22.45 21.63 21.30 M H 26705 26865 27025 815.5 831.5 847.5 Tune-up limit
(dBm) MPR
(dB) 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 22.39 22.48 22.33 22.41 22.34 22.36 22.57 22.60 22.36 23.50 0.00 22.37 22.47 22.28 23.50 0.00 22.41 22.47 22.28 22.58 22.70 22.52 22.61 22.67 22.53 22.41 22.53 22.31 23.50 0.00 22.47 22.27 22.25 23.50 0.00 22.56 22.58 22.43 M H 26697 26865 27033 814.7 831.5 848.3 Tune-up limit
(dBm) MPR
(dB) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 22.43 22.47 22.31 22.42 22.34 22.36 22.55 22.61 22.43 23.50 0.00 22.38 22.53 22.23 23.50 0.00 22.41 22.40 22.27 22.61 22.72 22.57 22.60 22.68 22.50 22.45 22.56 22.23 23.50 0.00 22.40 22.35 22.26 23.50 0.00 22.52 22.49 22.43 Page 35 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report
<WLAN Conducted Power>
Report No. : FA961801 General Note:
1. Per KDB 248227 D01v02r02, SAR test reduction is determined according to 802.11 transmission mode configurations and certain exposure conditions with multiple test positions. In the 2.4 GHz band, separate SAR procedures are applied to DSSS and OFDM configurations to simplify DSSS test requirements. For OFDM, in both 2.4 and 5 GHz bands, an initial test configuration must be determined for each standalone and aggregated frequency band, according to the transmission mode configuration with the highest maximum output power specified for production units to perform SAR measurements. If the same highest maximum output power applies to different combinations of channel bandwidths, modulations and data rates, additional procedures are applied to determine which test configurations require SAR measurement. When applicable, an initial test position may be applied to reduce the number of SAR measurements required for next to the ear, UMPC mini-tablet or hotspot mode configurations with multiple test positions. For 2.4 GHz 802.11b DSSS, either the initial test position procedure for multiple exposure test positions or the DSSS procedure for fixed exposure position is applied; these are mutually exclusive. For 2.4 GHz and 5 GHz OFDM configurations, the initial test configuration is applied to measure SAR using either the initial test position procedure for multiple exposure test position configurations or the initial test configuration procedures for fixed exposure test conditions. Based on the reported SAR of the measured configurations and maximum output power of the transmission mode configurations that are not included in the initial test configuration, the subsequent test configuration and initial test position procedures are applied to determine if SAR measurements are required for the remaining OFDM transmission configurations. In general, the number of test channels that require SAR measurement is minimized based on maximum output power measured for the test sample(s). For OFDM transmission configurations in the 2.4 GHz and 5 GHz bands, When the same maximum power is specified for multiple transmission modes in a frequency band, the largest channel bandwidth, lowest order modulation, lowest data rate and lowest order 802.11a/g/n/ac mode is used for SAR measurement, on the highest measured output power channel for each frequency band. DSSS and OFDM configurations are considered separately according to the required SAR procedures. SAR is measured in the initial test position using the 802.11 transmission mode configuration required by the DSSS procedure or initial test configuration and subsequent test configuration(s) according to the OFDM procedures.18 The initial test position procedure is described in the following:
a. When the reported SAR of the initial test position is 0.4 W/kg, further SAR measurement is not required for the other test positions in that exposure configuration and 802.11 transmission mode combinations within the frequency band or aggregated band. 2. 3. 4. b. When the reported SAR of the test position is > 0.4 W/kg, SAR is repeated for the 802.11 transmission mode configuration tested in the initial test position to measure the subsequent next closet/smallest test separation distance and maximum coupling test position on the highest maximum output power channel, until the report SAR is 0.8 W/kg or all required test position are tested. c. For all positions/configurations, when the reported SAR is > 0.8 W/kg, SAR is measured for these test positions/configurations on the subsequent next highest measured output power channel(s) until the reported SAR is 1.2 W/kg or all required channels are tested. Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 36 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report Report No. : FA961801
<2.4GHz WLAN>
2.4GHz WLAN Mode Channel Frequency Average
(MHz) power (dBm) Tune-Up Limit Duty Cycle %
802.11b 1Mbps 802.11g 6Mbps 802.11n-HT20 MCS0 1 6 11 1 6 11 1 6 11 2412 2437 2462 2412 2437 2462 2412 2437 2462 16.10 16.50 15.80 16.50 98.72 15.60 16.50 14.80 15.50 15.30 15.50 93.04 13.20 15.00 14.30 15.00 14.00 15.00 92.62 13.70 15.00 Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 37 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report
<5GHz WLAN>
Report No. : FA961801 Mode Channel Frequency Average power
(MHz)
(dBm) Tune-Up Limit Duty Cycle %
802.11a 6Mbps 802.11n-HT20 MCS0 5.2GHz WLAN 802.11n-HT40 MCS0 802.11ac-VHT20 MCS0 802.11ac-VHT40 MCS0 802.11ac-VHT80 MCS0 36 40 44 48 36 40 44 48 38 46 36 40 44 48 38 46 42 5180 5200 5220 5240 5180 5200 5220 5240 5190 5230 5180 5200 5220 5240 5190 5230 5210 15.51 15.35 15.20 15.22 15.31 15.15 14.95 14.92 13.41 15.01 12.60 12.40 12.33 12.13 9.91 9.71 11.51 16.00 16.00 16.00 16.00 16.00 16.00 16.00 16.00 15.00 15.50 14.00 14.00 14.00 14.00 11.00 11.00 13.00 97.08 96.90 94.12 96.50 94.19 88.54 Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 38 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report Report No. : FA961801 Mode Channel Frequency Average power
(MHz)
(dBm) Tune-Up Limit Duty Cycle %
802.11a 6Mbps 802.11n-HT20 MCS0 5.3GHz WLAN 802.11n-HT40 MCS0 802.11ac-VHT20 MCS0 802.11ac-VHT40 MCS0 802.11ac-VHT80 MCS0 52 56 60 64 52 56 60 64 54 62 52 56 60 64 54 62 58 5260 5280 5300 5320 5260 5280 5300 5320 5270 5310 5260 5280 5300 5320 5270 5310 5290 15.12 14.96 14.85 15.03 14.83 14.62 14.51 14.74 14.77 12.86 12.03 12.08 12.01 12.00 10.46 10.50 12.81 16.00 16.00 16.00 16.00 16.00 16.00 16.00 16.00 15.00 14.00 14.00 14.00 14.00 14.00 11.00 11.00 13.00 97.08 96.90 94.12 96.50 94.19 88.54 Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 39 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report Report No. : FA961801 Mode Channel Frequency Average power
(MHz)
(dBm) Tune-Up Limit Duty Cycle %
100 116 124 132 140 144 100 116 124 132 140 144 102 110 126 134 142 100 116 124 132 140 144 102 110 126 134 142 106 122 138 802.11a 6Mbps 802.11n-HT20 MCS0 5.5GHz WLAN 802.11n-HT40 MCS0 802.11ac-VHT20 MCS0 802.11ac-VHT40 MCS0 802.11ac-VHT80 MCS0 5500 5580 5620 5660 5700 5720 5500 5580 5620 5660 5700 5720 5510 5550 5630 5670 5710 5500 5580 5620 5660 5700 5720 5510 5550 5630 5670 5710 5530 5610 5690 15.30 15.36 15.32 14.97 15.50 15.27 14.85 15.06 14.97 14.69 15.17 14.98 15.18 15.21 15.08 14.70 15.26 12.36 12.45 12.30 12.07 11.67 12.25 10.02 10.18 10.01 10.48 10.14 13.22 13.20 12.71 16.00 16.00 16.00 16.00 16.00 16.00 16.00 16.00 16.00 16.00 16.00 16.00 15.50 15.50 15.50 15.50 15.50 12.50 12.50 12.50 12.50 12.50 12.50 10.50 10.50 10.50 10.50 10.50 14.00 14.00 14.00 97.08 96.90 94.12 96.50 94.19 88.54 Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 40 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report Report No. : FA961801 Mode Channel Frequency
(MHz) Average power (dBm) Tune-Up Limit Duty Cycle %
802.11a 6Mbps 5.8GHz WLAN 802.11n-HT20 MCS0 802.11n-HT40 MCS0 802.11ac-VHT20 MCS0 802.11ac-VHT40 MCS0 802.11ac-VHT80 MCS0 149 157 165 149 157 165 151 159 149 157 165 151 159 155 5745 5785 5825 5745 5785 5825 5755 5795 5745 5785 5825 5755 5795 5775 14.99 15.03 15.18 14.68 14.70 14.85 14.64 14.78 12.15 12.23 12.47 10.20 10.57 16.00 16.00 16.00 16.00 16.00 16.00 15.00 15.00 12.50 12.50 12.50 11.00 11.00 97.08 96.90 94.12 96.50 94.19 13.10 14.00 88.54 Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 41 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report Report No. : FA961801
<2.4GHz Bluetooth>
General Note:
1. 2. For 2.4GHz Bluetooth SAR testing was selected 1Mbps, due to its highest average power. The Bluetooth duty cycle is 76.59 % as following figure, according to 2016 Oct. TCB workshop for Bluetooth SAR scaling need further consideration and the theoretical duty cycle is 83.3%, therefore the actual duty cycle will be scaled up to the theoretical value of Bluetooth reported SAR calculation Bluetooth time-domain plot Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 42 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report Report No. : FA961801 Mode Channel BR/EDR CH 00 CH 39 CH 78 Mode Channel LE V4.0 CH 00 CH 19 CH 39 Mode Channel LE V5.0 CH 00 CH 19 CH 39 Frequency
(MHz) 2402 2441 2480 Frequency
(MHz) 2402 2440 2480 Frequency
(MHz) 2402 2440 2480 Average power (dBm) Tune-up limit (dBm) 1Mbps 5.45 5.82 6.25 Average power (dBm) GFSK 3.60 3.70 3.50 Average power (dBm) GFSK 3.40 3.60 3.40 7.00 Tune-up Limit 5.00 Tune-up Limit 5.00 Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 43 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report Report No. : FA961801 13. Antenna Location Top Side 70mm m Right Side NFC Antenna Bluetooth & WLAN Antenna 1 3 0 m m Left Side WWAN Antenna Bottom Side Back View Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 44 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report 14. SAR Test Results Report No. : FA961801 General Note:
1. Per KDB 447498 D01v06, the reported SAR is the measured SAR value adjusted for maximum tune-up tolerance. a. Tune-up scaling Factor = tune-up limit power (mW) / EUT RF power (mW), where tune-up limit is the maximum rated power among all production units. b. For SAR testing of WLAN signal with non-100% duty cycle, the measured SAR is scaled-up by the duty cycle scaling factor which is equal to "1/(duty cycle)"
c. For WWAN: Reported SAR(W/kg)= Measured SAR(W/kg)*Tune-up Scaling Factor d. For WLAN/Bluetooth: Reported SAR(W/kg)= Measured SAR(W/kg)* Duty Cycle scaling factor * Tune-up scaling factor 2. Per KDB 447498 D01v06, for each exposure position, testing of other required channels within the operating mode of a 0.8 W/kg or 2.0 W/kg, for 1-g or 10-g respectively, when the transmission band is 100 MHz frequency band is not required when the reported 1-g or 10-g SAR for the mid-band or highest output power channel is:
0.6 W/kg or 1.5 W/kg, for 1-g or 10-g respectively, when the transmission band is between 100 MHz and 200 MHz 0.4 W/kg or 1.0 W/kg, for 1-g or 10-g respectively, when the transmission band is 200 MHz 3. Per KDB 865664 D01v01r04, for each frequency band, repeated SAR measurement is not required when the measured SAR is 0.8W/kg. GSM Note:
1. Per KDB 941225 D01v03r01, for SAR test reduction for GPRS / EDGE modes is determined by the source-based time-averaged output power including tune-up tolerance. The mode with highest specified time-averaged output power should be tested for SAR compliance in the applicable exposure conditions. For modes with the same specified maximum output power and tolerance, the higher number time-slot configuration should be tested. Therefore, the GPRS (3Tx slots) for GSM850 and the GPRS (4Tx slots) for GSM1900 is considered as the primary mode. Other configurations of GPRS / EDGE are considered as secondary modes. The 3G SAR test reduction procedure is applied, when the maximum output power and tune-up tolerance specified for production units in a secondary mode is dB higher than the primary mode, SAR measurement is not required for the secondary mode. 2. LTE Note:
1. Per KDB 941225 D05v02r05, start with the largest channel bandwidth and measure SAR for QPSK with 1 RB allocation, using the RB offset and required test channel combination with the highest maximum output power for RB offsets at the upper edge, middle and lower edge of each required test channel. 2. Per KDB 941225 D05v02r05, 50% RB allocation for QPSK SAR testing follows 1RB QPSK allocation procedure. 3. Per KDB 941225 D05v02r05, For QPSK with 100% RB allocation, SAR is not required when the highest maximum output power for 100 % RB allocation is less than the highest maximum output power in 50% and 1 RB allocations and the highest reported SAR for 1 RB and 50% RB allocation are 0.8 W/kg. Otherwise, SAR is measured for the highest output power channel; and if the reported SAR is > 1.45 W/kg, the remaining required test channels must also be tested. 4. Per KDB 941225 D05v02r05, 16QAM output power for each RB allocation configuration is > not dB higher than the same configuration in QPSK and the reported SAR for the QPSK configuration is 1.45 W/kg; Per KDB 941225 D05v02r05, 16QAM SAR testing is not required. 5. Per KDB 941225 D05v02r05, Smaller bandwidth output power for each RB allocation configuration is > not dB higher than the same configuration in the largest supported bandwidth, and the reported SAR for the largest supported bandwidth is 1.45 W/kg; Per KDB 941225 D05v02r05, smaller bandwidth SAR testing is not required. 6. For LTE B4 / B5 / B12 the maximum bandwidth does not support three non-overlapping channels, per KDB 941225 D05v02r05, when a device supports overlapping channel assignment in a channel bandwidth configuration, the middle channel of the group of overlapping channels should be selected for testing. Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 45 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report Report No. : FA961801 WLAN Note:
1. Per KDB 248227 D01v02r02, for 2.4GHz 802.11g/n SAR testing is not required when the highest reported SAR for DSSS is adjusted by the ratio of OFDM to DSSS specified maximum output power and the adjusted SAR is 1.2 W/kg. 2. For head SAR testing, Per KDB 248227 D01v02r02, U-NII-1 SAR testing is not required when the U-NII-2A band highest reported SAR for a test configuration is 1.2 W/kg, SAR is not required for U-NII-1 band. 3. When the reported SAR of the test position is > 0.4 W/kg, SAR is repeated for the 802.11 transmission mode configuration tested in the initial test position to measure the subsequent next closet/smallest test separation distance and maximum coupling test position on the highest maximum output power channel, until the report SAR is 0.8 W/kg or all required test position are tested. 4. For all positions / configurations, when the reported SAR is > 0.8 W/kg, SAR is measured for these test positions /
configurations on the subsequent next highest measured output power channel(s) until the reported SAR is 1.2 W/kg or all required channels are tested. 5. During SAR testing the WLAN transmission was verified using a spectrum analyzer. Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 46 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report Report No. : FA961801 14.1 Body SAR
<GSM SAR>
Plot No. Band Mode Test Position Gap
(mm) Ch. Freq.
(MHz) Average Power
(dBm) GSM850 GPRS(3 Tx slots) Front 128 824.2 28.28 01 GSM850 GPRS(3 Tx slots) GSM850 GPRS(3 Tx slots) GSM850 GPRS(3 Tx slots) GSM1900 GPRS(4 Tx slots) Front GSM1900 GPRS(4 Tx slots) GSM1900 GPRS(4 Tx slots) 02 GSM1900 GPRS(4 Tx slots)
<LTE SAR>
Back Back Back Back Back Back 0 0 0 0 0 0 0 0 Tune-Up Limit
(dBm) 29.50 Tune-up Scaling Factor 1.324 Drift
(dB) 0.04 Power Measured 1g SAR
(W/kg) Reported 1g SAR
(W/kg) 0.384 0.509 128 824.2 28.28 29.50 1.324
-0.17 0.804 1.065 189 836.4 28.24 29.50 1.337 251 848.8 28.26 29.50 1.330 512 1850.2 24.61 25.00 1.094 512 1850.2 24.61 25.00 1.094 661 1880 24.27 25.00 1.183 0.11 0.02 0.06 0.03 0.15 0.759 1.014 0.656 0.873 0.015 0.016 0.154 0.168 0.169 0.200 810 1909.8 24.1 25.00 1.230 0.1 0.184 0.226 Plot No. Band BW
(MHz) Modulation RB Size RB Test Offset Position Gap
(mm) Ch. Freq.
(MHz) Average Power
(dBm) Tune-Up Limit
(dBm) Tune-up Scaling Factor Power Measured Drift
(dB) 1g SAR
(W/kg) Reported 1g SAR
(W/kg) LTE Band 12 10M QPSK 03 LTE Band 12 10M QPSK LTE Band 12 10M QPSK LTE Band 12 10M QPSK LTE Band 13 10M QPSK LTE Band 13 10M QPSK LTE Band 13 10M QPSK 04 LTE Band 13 10M QPSK LTE Band 5 10M QPSK LTE Band 5 10M QPSK LTE Band 5 10M QPSK 05 LTE Band 5 10M QPSK LTE Band 26 15M QPSK LTE Band 26 15M QPSK LTE Band 26 15M QPSK LTE Band 26 15M QPSK LTE Band 26 15M QPSK 06 LTE Band 26 15M QPSK LTE Band 26 15M QPSK LTE Band 26 15M QPSK LTE Band 4 20M QPSK LTE Band 4 20M QPSK LTE Band 4 20M QPSK 07 LTE Band 4 20M QPSK LTE Band 2 20M QPSK LTE Band 2 20M QPSK 08 LTE Band 2 20M QPSK LTE Band 2 20M QPSK LTE Band 2 20M QPSK LTE Band 2 20M QPSK LTE Band 2 20M QPSK LTE Band 2 20M QPSK 1 1 3 3 1 1 3 3 1 1 3 3 1 1 1 1 3 3 3 3 1 1 3 3 1 1 1 1 3 3 3 3 5 5 0 0 5 5 3 3 5 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Front 0 23095 707.5 22.32 23.00 1.169 0.07 0.012 0.014 Back 0 23095 707.5 22.32 23.00 1.169 0.09 0.087 0.102 Front 0 23095 707.5 22.38 23.00 1.153 0.02 0.011 0.013 Back 0 23095 707.5 22.38 23.00 1.153 0.05 0.085 0.098 Front 0 23230 782 22.86 23.00 1.033 0.04 0.046 0.048 Back 0 23230 782 22.86 23.00 1.033 0.06 0.103 0.106 Front 0 23230 782 22.70 23.00 1.072 0.05 0.047 0.050 Back 0 23230 782 22.70 23.00 1.072 0.09 0.102 0.109 Front 0 20525 836.5 22.59 23.50 1.233 0.04 0.039 0.048 Back 0 20525 836.5 22.59 23.50 1.233 0.01 0.106 0.131 Front 0 20525 836.5 22.55 23.50 1.245 0.08 0.041 0.051 Back 0 20525 836.5 22.55 23.50 1.245 0.03 0.107 0.133 Front 0 26865 831.5 22.79 23.50 1.178 0.05 0.047 0.055 Back 0 26865 831.5 22.79 23.50 1.178 0.11 0.105 0.124 Back 0 26765 821.5 22.47 23.50 1.268 0.06 0.096 0.122 Back 0 26965 841.5 22.39 23.50 1.291 0.02 0.098 0.127 Front 0 26865 831.5 22.71 23.50 1.199 0.09 0.048 0.058 Back 0 26865 831.5 22.71 23.50 1.199 0.13 0.107 0.128 Back 0 26765 821.5 22.60 23.50 1.230 0.05 0.103 0.127 Back 0 26965 841.5 22.42 23.50 1.282 0.02 0.098 0.126 Front 0 20175 1732.5 22.60 23.00 1.096 0.16 0.003 0.003 Back 0 20175 1732.5 22.60 23.00 1.096 0.08 0.049 0.054 Front 0 20175 1732.5 22.31 23.00 1.172 0.04 0.003 0.004 Back 0 20175 1732.5 22.31 23.00 1.172 0.02 0.061 0.072 Front 0 19100 1900 22.78 23.00 1.052
-0.05 0.010 0.011 Back 0 19100 1900 22.78 23.00 1.052 0.03 0.082 0.086 Back 0 18700 1860 22.36 23.00 1.159 0.09 0.095 0.110 Back 0 18900 1880 22.37 23.00 1.156 0.07 0.077 0.089 Front 0 19100 1900 22.71 23.00 1.069 0.06 0.011 0.012 Back 0 19100 1900 22.71 23.00 1.069 0.09 0.087 0.093 Back 0 18700 1860 22.59 23.00 1.099 0.02 0.079 0.087 Back 0 18900 1880 22.44 23.00 1.138 0.13 0.080 0.091 Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 47 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report
<WLAN2.4GHz SAR>
Plot No. Band Mode Test Position Gap
(mm) Ch. Freq.
(MHz) Average Power
(dBm) Tune-Up Limit
(dBm) Tune-up Scaling Factor Report No. : FA961801 Duty Cycle
%
Duty Cycle Scaling Factor Power Measured Drift
(dB) 1g SAR
(W/kg) Reported 1g SAR
(W/kg) 09 WLAN2.4GHz 802.11b 1Mbps WLAN2.4GHz 802.11b 1Mbps WLAN2.4GHz 802.11b 1Mbps WLAN2.4GHz 802.11b 1Mbps Front Back Front Front 0 0 0 0 1 2412 16.10 16.50 1.096 98.72 1.013 0.03 0.161 0.179 1 2412 16.10 16.50 1.096 98.72 1.013
-0.06 0.125 0.139 6 2437 15.80 16.50 1.175 98.72 1.013 0.01 0.127 0.151 11 2462 15.60 16.50 1.230 98.72 1.013 0.07 0.129 0.161
<WLAN 5GHz SAR>
Plot No. Band Mode Test Position Gap
(mm) Ch. Freq.
(MHz) Average Power
(dBm) Tune-Up Limit
(dBm) Tune-up Scaling Factor Duty Cycle
%
Power Measured Drift
(dB) 1g SAR
(W/kg) Reported 1g SAR
(W/kg) Duty Cycle Scaling Factor WLAN 5.3GH 802.11a 6Mbps Front WLAN 5.3GH 802.11a 6Mbps Back WLAN 5.3GH 802.11a 6Mbps Front 10 WLAN 5.3GH 802.11a 6Mbps Front WLAN 5.3GH 802.11a 6Mbps Front WLAN 5.5GH 802.11a 6Mbps Front WLAN 5.5GH 802.11a 6Mbps Back 11 WLAN 5.5GH 802.11a 6Mbps Front WLAN 5.5GH 802.11a 6Mbps Front WLAN 5.5GH 802.11a 6Mbps Front WLAN 5.5GH 802.11a 6Mbps Front WLAN 5.5GH 802.11a 6Mbps Front WLAN 5.8GH 802.11a 6Mbps Front WLAN 5.8GH 802.11a 6Mbps Back 12 WLAN 5.8GH 802.11a 6Mbps Front WLAN 5.8GH 802.11a 6Mbps Front 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 52 5260 15.12 16.00 1.225 97.08 1.030 0.01 0.658 0.830 52 5260 15.12 16.00 1.225 97.08 1.030 0.06 0.251 0.317 56 5280 14.96 16.00 1.271 97.08 1.030 -0.01 0.827 1.082 60 5300 14.85 16.00 1.304 97.08 1.030 0.05 0.808 1.085 64 5320 15.03 16.00 1.251 97.08 1.030 0.02 0.736 0.948 140 5700 15.50 16.00 1.122 97.08 1.030 0.11 0.541 0.625 140 5700 15.50 16.00 1.122 97.08 1.030 0.02 0.132 0.153 100 5500 15.30 16.00 1.175 97.08 1.030 0.06 0.782 0.947 116 5580 15.36 16.00 1.159 97.08 1.030 0.02 0.738 0.881 124 5620 15.32 16.00 1.169 97.08 1.030 -0.04 0.628 0.756 132 5660 14.97 16.00 1.268 97.08 1.030 0.05 0.571 0.746 144 5720 15.27 16.00 1.183 97.08 1.030 0.08 0.480 0.585 165 5825 15.18 16.00 1.208 97.08 1.030 0.03 0.409 0.509 165 5825 15.18 16.00 1.208 97.08 1.030 0.01 0.104 0.129 149 5745 14.99 16.00 1.262 97.08 1.030 0.01 0.556 0.723 157 5785 15.03 16.00 1.250 97.08 1.030 0.01 0.490 0.631
<Bluetooth SAR>
Plot No. Band Mode Bluetooth DH5 1Mbps Bluetooth DH5 1Mbps 13 Bluetooth DH5 1Mbps Bluetooth DH5 1Mbps Test Position Gap
(mm) Ch. Freq.
(MHz) Average Power
(dBm) Tune-Up Limit
(dBm) Tune-up Scaling Factor Duty Cycle
%
Duty Cycle Scaling Factor Power Measured Drift
(dB) 1g SAR
(W/kg) Reported 1g SAR
(W/kg) 0 0 0 0 78 78 2480 6.25 2480 6.25 0 2402 5.45 39 2441 5.82 7 7 7 7 1.189 76.59 1.088 0.09 0.010 0.013 1.189 76.59 1.088 0.05 0.001 0.001 1.429 76.59 1.088 0.04 0.00894 0.014 1.313 76.59 1.088 0.01 0.007 0.011 Front Back Front Front Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 48 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report 15. Repeated SAR Measurement Report No. : FA961801 No. Band Mode Test Position Gap
(mm) Ch. Freq.
(MHz) Average Power
(dBm) Tune-Up Limit
(dBm) Tune-up Scaling Factor Duty Cycle
%
Duty Cycle Scaling Factor Power Measured Drift
(dB) 1g SAR
(W/kg) Ratio Reported 1g SAR
(W/kg) 1st GSM850 GPRS(3 Tx slots) Back 0 128 824.2 28.28 29.50 1.324 2nd GSM850 GPRS(3 Tx slots) Back 0 128 824.2 28.28 29.50 1.324
-
-
1.000
-0.17 0.804 1 1.000 0.12 0.799 1.006 1st WLAN5GHz 802.11a 6Mbps Front 2nd WLAN5GHz 802.11a 6Mbps Front 0 0 56 5280 14.96 16.00 1.271 97.08 1.030
-0.01 0.827 1 56 5280 14.96 16.00 1.271 97.08 1.030 0.08 0.819 1.010 1.065 1.058 1.082 1.072 General Note:
1. Per KDB 865664 D01v01r04, for each frequency band, repeated SAR measurement is required only when the measured SAR is 0.8W/kg. 2. Per KDB 865664 D01v01r04, if the ratio among the repeated measurement is 1.2 and the measured SAR
<1.45W/kg, only one repeated measurement is required. 3. The ratio is the difference in percentage between original and repeated measured SAR. 4. All measurement SAR result is scaled-up to account for tune-up tolerance and is compliant. Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 49 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report Report No. : FA961801 16. Simultaneous Transmission Analysis NO. 1. 2. 3. 4. 5. 6. Simultaneous Transmission Configurations GPRS/EDGE + WLAN2.4GHz GPRS/EDGE + Bluetooth GPRS/EDGE + WLAN5GHz LTE + WLAN2.4GHz LTE + WLAN5GHz LTE + Bluetooth Body Yes Yes Yes Yes Yes Yes General Note:
1. WLAN 2.4GHz and Bluetooth share the same antenna, and cannot transmit simultaneously. 2. According to the character of the EUT, WLAN 5GHz and Bluetooth cannot transmit simultaneously. 3. 4. Per KDB 447498 D01v06, simultaneous transmission SAR is compliant if, The reported SAR summation is calculated based on the same configuration and test position. i) Scalar SAR summation < 1.6W/kg. ii) SPLSR = (SAR1 + SAR2)^1.5 / (min. separation distance, mm), and the peak separation distance is determined from the square root of [(x1-x2)2 + (y1-y2)2 + (z1-z2)2], where (x1, y1, z1) and (x2, y2, z2) are the coordinates of the extrapolated peak SAR locations in the zoom scan. iii) If SPLSR 0.04, simultaneously transmission SAR measurement is not necessary. iv) Simultaneously transmission SAR measurement, and the reported multi-band SAR < 1.6W/kg. Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 50 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report 16.1 Body Exposure Conditions Report No. : FA961801 WWAN Band Exposure Position 1 WWAN 1g SAR
(W/kg) 2 2.4GHz WLAN 1g SAR
(W/kg) 3 4 5GHz WLAN 1g SAR
(W/kg) Bluetooth 1g SAR
(W/kg) 1+2 1+3 Summed 1g SAR
(W/kg) Summed 1g SAR
(W/kg) 1+4 Summed 1g SAR
(W/kg) GSM GSM850 GSM1900 Band 2 Band 4 Band 5 Band 12 Band 13 Band 26 LTE Front Back Front Back Front Back Front Back Front Back Front Back Front Back Front Back 0.509 1.065 0.016 0.226 0.012 0.110 0.004 0.072 0.051 0.133 0.014 0.102 0.050 0.109 0.058 0.128 0.179 0.139 0.179 0.139 0.179 0.139 0.179 0.139 0.179 0.139 0.179 0.139 0.179 0.139 0.179 0.139 1.085 0.014 0.317 0.001 1.085 0.014 0.317 0.001 1.085 0.014 0.317 0.001 1.085 0.014 0.317 0.001 1.085 0.014 0.317 0.001 1.085 0.014 0.317 0.001 1.085 0.014 0.317 0.001 1.085 0.014 0.317 0.001 0.69 1.20 0.20 0.37 0.19 0.25 0.18 0.21 0.23 0.27 0.19 0.24 0.23 0.25 0.24 0.27 1.59 1.38 1.10 0.54 1.10 0.43 1.09 0.39 1.14 0.45 1.10 0.42 1.14 0.43 1.14 0.45 0.52 1.07 0.03 0.23 0.03 0.11 0.02 0.07 0.07 0.13 0.03 0.10 0.06 0.11 0.07 0.13 Test EngineerChanglin Huang, Bin He, Mengming Dai Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 51 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report 17. Uncertainty Assessment Report No. : FA961801 Per KDB 865664 D01 SAR measurement 100MHz to 6GHz, when the highest measured 1-g SAR within a frequency band is < 1.5 W/kg. The expanded SAR measurement uncertainty must be 30%, for a confidence interval of k = 2. If these conditions are met, extensive SAR measurement uncertainty analysis described in IEEE Std 1528-2013 is not required in SAR reports submitted for equipment approval. For this device, the highest measured 1-g SAR is less 1.5W/kg and highest measured 10-g SAR is less 3.75W/kg. Therefore, the measurement uncertainty table is not required in this report. Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 52 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report 18. References Report No. : FA961801
[1] FCC 47 CFR Part 2 Frequency Allocations and Radio Treaty Matters; General Rules and Regulations
[2] ANSI/IEEE Std. C95.1-1992, IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz, September 1992
[3]
IEEE Std. 1528-2013, IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices:
Measurement Techniques, Sep 2013
[4] SPEAG DASY System Handbook
[5] FCC KDB 248227 D01 v02r02, SAR Guidance for IEEE 802.11 (WiFi) Transmitters, Oct 2015.
[6] FCC KDB 447498 D01 v06, Mobile and Portable Device RF Exposure Procedures and Equipment Authorization Policies, Oct 2015
[7] FCC KDB 941225 D05 v02r05, SAR Evaluation Considerations for LTE Devices, Dec 2015
[8] FCC KDB 865664 D01 v01r04, "SAR Measurement Requirements for 100 MHz to 6 GHz", Aug 2015.
[9] FCC KDB 865664 D02 v01r02, RF Exposure Compliance Reporting and Documentation Considerations Oct 2015. Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page 53 of 53 Issued Date : Jul. 29, 2019 Form version : 181113 FCC SAR Test Report Report No. : FA961801 Appendix A. Plots of System Performance Check The plots are shown as follows. Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page : A1 of A1 Issued Date : Jul. 29, 2019 Form version : 181113 Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2019.07.07 System Check_Head_750MHz DUT: D750V3-SN:1099 Communication System: UID 0, CW (0); Frequency: 750 MHz;Duty Cycle: 1:1 Medium: HSL_750_190707 Medium parameters used: f = 750 MHz; = 0.886 S/m; r = 41.532;
= 1000 kg/m3 Ambient Temperature23.5 ; Liquid Temperature22.6 DASY5 Configuration:
- Probe: EX3DV4 - SN3819; ConvF(10, 10, 10); Calibrated: 2019.03.01;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn715; Calibrated: 2019.01.23
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 2.59 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 55.14 V/m; Power Drift = 0.11 dB Peak SAR (extrapolated) = 3.02 W/kg SAR(1 g) = 2.11 W/kg; SAR(10 g) = 1.42 W/kg Maximum value of SAR (measured) = 2.63 W/kg 0 dB = 2.63 W/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2019.07.07 System Check_Head_835MHz DUT: D835V2-SN:4d162 Communication System: UID 0, CW (0); Frequency: 835 MHz;Duty Cycle: 1:1 Medium: HSL_835_190707 Medium parameters used: f = 835 MHz; = 0.902 S/m; r = 40.749;
= 1000 kg/m3 Ambient Temperature23.4 ; Liquid Temperature22.6 DASY5 Configuration:
- Probe: EX3DV4 - SN3819; ConvF(9.57, 9.57, 9.57); Calibrated: 2019.03.01;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn715; Calibrated: 2019.01.23
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 3.14 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 60.13 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 3.69 W/kg SAR(1 g) = 2.53 W/kg; SAR(10 g) = 1.67 W/kg Maximum value of SAR (measured) = 3.18 W/kg 0 dB = 3.18 W/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2019.07.06 System Check_Head_1750MHz DUT: D1750V2-SN:1137 Communication System: UID 0, CW; Frequency: 1750 MHz;Duty Cycle: 1:1 Medium: HSL_1750_190706 Medium parameters used: f = 1750 MHz; = 1.378 S/m; r = 41.34;
= 1000 kg/m3 Ambient Temperature23.6 ; Liquid Temperature22.7 DASY5 Configuration:
- Probe: EX3DV4 - SN3819; ConvF(8.54, 8.54, 8.54); Calibrated: 2019.03.01;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn715; Calibrated: 2019.01.23
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Pin=250mW/Area Scan (61x71x1): Interpolated grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 13.3 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 95.50 V/m; Power Drift = 0.17 dB Peak SAR (extrapolated) = 16.2 W/kg SAR(1 g) = 9.05 W/kg; SAR(10 g) = 4.82 W/kg Maximum value of SAR (measured) = 12.6 W/kg 0 dB = 12.6 W/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2019.07.05 System Check_Head_1900MHz DUT: D1900V2-SN:5d182 Communication System: UID 0, CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: HSL_1900_190705 Medium parameters used: f = 1900 MHz; = 1.445 S/m; r = 40.021;
= 1000 kg/m3 Ambient Temperature23.7 ; Liquid Temperature22.4 DASY5 Configuration:
- Probe: EX3DV4 - SN3819; ConvF(8.27, 8.27, 8.27); Calibrated: 2019.03.01;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn715; Calibrated: 2019.01.23
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 15.3 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 99.46 V/m; Power Drift = 0.15 dB Peak SAR (extrapolated) = 19.5 W/kg SAR(1 g) = 10.3 W/kg; SAR(10 g) = 5.28 W/kg Maximum value of SAR (measured) = 15.0 W/kg 0 dB = 15.0 W/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2019.07.11 System Check_Head_2450MHz DUT: D2450V2-SN:924 Communication System: UID 0, CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: HSL_2450_190711 Medium parameters used: f = 2450 MHz; = 1.732 S/m; r
= 1000 kg/m3 Ambient Temperature23.4
; Liquid Temperature22.7
= 40.764;
DASY5 Configuration:
- Probe: EX3DV4 - SN3819; ConvF(7.21, 7.21, 7.21); Calibrated: 2019.03.01;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn715; Calibrated: 2019.01.23
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Pin=250mW/Area Scan (81x81x1): Interpolated grid: dx=12mm, dy=12mm Maximum value of SAR (interpolated) = 20.0 W/kg Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 82.32 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 29.0 W/kg SAR(1 g) = 13.1 W/kg; SAR(10 g) = 5.87 W/kg Maximum value of SAR (measured) = 20.6 W/kg 0 dB = 20.6 W/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2019.07.11 System Check_Head_5250MHz DUT: D5GHzV2-SN:1167 Communication System: UID 0, CW (0); Frequency: 5250 MHz;Duty Cycle: 1:1 Medium: HSL_5250_190711 Medium parameters used: f = 5250 MHz; = 4.597 S/m; r
= 1000 kg/m3 Ambient Temperature23.6
; Liquid Temperature22.5
= 36.629;
DASY5 Configuration:
- Probe: EX3DV4 - SN3819; ConvF(5.07, 5.07, 5.07); Calibrated: 2019.03.01;
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn715; Calibrated: 2019.01.23
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Pin=100mW/Area Scan (71x71x1): Interpolated grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 18.9 W/kg Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 57.54 V/m; Power Drift = -0.12 dB Peak SAR (extrapolated) = 33.2 W/kg SAR(1 g) = 7.79 W/kg; SAR(10 g) = 2.13 W/kg Maximum value of SAR (measured) = 19.9 W/kg 0 dB = 19.9 W/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2019.07.12 System Check_Head_5600MHz DUT: D5GHzV2-SN:1167 Communication System: UID 0, CW (0); Frequency: 5600 MHz;Duty Cycle: 1:1 Medium: HSL_5600_190712 Medium parameters used: f = 5600 MHz; = 5.004 S/m; r
= 1000 kg/m3 Ambient Temperature23.7
; Liquid Temperature22.6
= 36.093;
DASY5 Configuration:
- Probe: EX3DV4 - SN3819; ConvF(4.7, 4.7, 4.7); Calibrated: 2019.03.01;
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn715; Calibrated: 2019.01.23
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Pin=100mW/Area Scan (71x71x1): Interpolated grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 18.8 W/kg Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 51.70 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 34.0 W/kg SAR(1 g) = 7.83 W/kg; SAR(10 g) = 2.25 W/kg Maximum value of SAR (measured) = 19.4 W/kg 0 dB = 19.4 W/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2019.07.12 System Check_Head_5750MHz DUT: D5GHzV2-SN:1167 Communication System: UID 0, CW (0); Frequency: 5750 MHz;Duty Cycle: 1:1 Medium: HSL_5750_190712 Medium parameters used: f = 5750 MHz; = 5.173 S/m; r
= 1000 kg/m3 Ambient Temperature23.6
; Liquid Temperature22.8
= 35.826;
DASY5 Configuration:
- Probe: EX3DV4 - SN3819; ConvF(4.77, 4.77, 4.77); Calibrated: 2019.03.01;
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn715; Calibrated: 2019.01.23
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Pin=100mW/Area Scan (71x71x1): Interpolated grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 19.5 W/kg Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 54.47 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 34.4 W/kg SAR(1 g) = 7.87 W/kg; SAR(10 g) = 2.15 W/kg Maximum value of SAR (measured) = 20.1 W/kg 0 dB = 20.1 W/kg FCC SAR Test Report Report No. : FA961801 Appendix B. Plots of High SAR Measurement The plots are shown as follows. Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page : B1 of B1 Issued Date : Jul. 29, 2019 Form version : 181113 Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2019.07.07 01_GSM850_GPRS(3 Tx slots)_Back_0mm_Ch128 Communication System: UID 0, GPRS/EDGE11 (0); Frequency: 824.2 MHz;Duty Cycle: 1:2.77 Medium: HSL_835_190707 Medium parameters used: f = 824.2 MHz; = 0.892 S/m; r = 40.852;
= 1000 kg/m3 Ambient Temperature23.4 ; Liquid Temperature22.6 DASY5 Configuration:
- Probe: EX3DV4 - SN3819; ConvF(9.57, 9.57, 9.57); Calibrated: 2019.03.01;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn715; Calibrated: 2019.01.23
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch128/Area Scan (71x111x1): Interpolated grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 1.41 W/kg Ch128/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 13.20 V/m; Power Drift = -0.17 dB Peak SAR (extrapolated) = 2.40 W/kg SAR(1 g) = 0.802 W/kg; SAR(10 g) = 0.408 W/kg Maximum value of SAR (measured) = 1.37 W/kg Ch128/Zoom Scan (5x5x7)/Cube 1: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 13.20 V/m; Power Drift = -0.17 dB Peak SAR (extrapolated) = 1.81 W/kg SAR(1 g) = 0.804 W/kg; SAR(10 g) = 0.436 W/kg Maximum value of SAR (measured) = 1.28 W/kg 0 dB = 1.28 W/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2019.07.05 02_GSM1900_GPRS(4 Tx slots)_Back_0mm_Ch810 Communication System: UID 0, GPRS/EDGE12 (0); Frequency: 1909.8 MHz;Duty Cycle: 1:2.08 Medium: HSL_1900_190705 Medium parameters used: f = 1910 MHz; = 1.455 S/m; r = 39.979;
= 1000 kg/m3 Ambient Temperature23.7 ; Liquid Temperature22.4 DASY5 Configuration:
- Probe: EX3DV4 - SN3819; ConvF(8.27, 8.27, 8.27); Calibrated: 2019.03.01;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn715; Calibrated: 2019.01.23
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch810/Area Scan (71x111x1): Interpolated grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.263 W/kg Ch810/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.086 V/m; Power Drift = 0.10 dB Peak SAR (extrapolated) = 0.546 W/kg SAR(1 g) = 0.184 W/kg; SAR(10 g) = 0.078 W/kg Maximum value of SAR (measured) = 0.286 W/kg 0 dB = 0.286 W/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2019.07.07 03_LTE Band 12_10M_QPSK_1RB_5Offset_Back_0mm_Ch23095 Communication System: UID 0, LTE (0); Frequency: 707.5 MHz;Duty Cycle: 1:1 Medium: HSL_750_190707 Medium parameters used: f = 707.5 MHz; = 0.864 S/m; r = 42.444;
= 1000 kg/m3 Ambient Temperature23.5 ; Liquid Temperature22.6 DASY5 Configuration:
- Probe: EX3DV4 - SN3819; ConvF(10, 10, 10); Calibrated: 2019.03.01;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn715; Calibrated: 2019.01.23
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch23095/Area Scan (71x111x1): Interpolated grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.141 W/kg Ch23095/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 1.307 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 0.268 W/kg SAR(1 g) = 0.087 W/kg; SAR(10 g) = 0.051 W/kg Maximum value of SAR (measured) = 0.169 W/kg 0 dB = 0.169 W/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2019.07.07 04_LTE Band 13_10M_QPSK_3RB_3Offset_Back_0mm_Ch23230 Communication System: UID 0, LTE (0); Frequency: 782 MHz;Duty Cycle: 1:1 Medium: HSL_750_190707 Medium parameters used: f = 782 MHz; = 0.905 S/m; r = 40.814;
= 1000 kg/m3 Ambient Temperature23.5 ; Liquid Temperature22.6 DASY5 Configuration:
- Probe: EX3DV4 - SN3819; ConvF(10, 10, 10); Calibrated: 2019.03.01;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn715; Calibrated: 2019.01.23
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch23230/Area Scan (71x111x1): Interpolated grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.150 W/kg Ch23230/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 0.9350 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 0.271 W/kg SAR(1 g) = 0.102 W/kg; SAR(10 g) = 0.054 W/kg Maximum value of SAR (measured) = 0.164 W/kg 0 dB = 0.164 W/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2019.07.07 05_LTE Band 5_10M_QPSK_3RB_0Offset_Back_0mm_Ch20525 Communication System: UID 0, LTE (0); Frequency: 836.5 MHz;Duty Cycle: 1:1 Medium: HSL_835_190707 Medium parameters used: f = 836.5 MHz; = 0.903 S/m; r = 40.74;
= 1000 kg/m3 Ambient Temperature23.4 ; Liquid Temperature22.6 DASY5 Configuration:
- Probe: EX3DV4 - SN3819; ConvF(9.57, 9.57, 9.57); Calibrated: 2019.03.01;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn715; Calibrated: 2019.01.23
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch20525/Area Scan (71x111x1): Interpolated grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.180 W/kg Ch20525/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 4.311 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 0.349 W/kg SAR(1 g) = 0.107 W/kg; SAR(10 g) = 0.056 W/kg Maximum value of SAR (measured) = 0.203 W/kg 0 dB = 0.203 W/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2019.07.07 06_LTE Band 26_15M_QPSK_3RB_0Offset_Back_0mm_Ch26865 Communication System: UID 0, LTE (0); Frequency: 831.5 MHz;Duty Cycle: 1:1 Medium: HSL_835_190707 Medium parameters used: f = 831.5 MHz; = 0.899 S/m; r = 40.782;
= 1000 kg/m3 Ambient Temperature23.4 ; Liquid Temperature22.6 DASY5 Configuration:
- Probe: EX3DV4 - SN3819; ConvF(9.57, 9.57, 9.57); Calibrated: 2019.03.01;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn715; Calibrated: 2019.01.23
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch26865/Area Scan (71x111x1): Interpolated grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.183 W/kg Ch26865/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 4.699 V/m; Power Drift = 0.13 dB Peak SAR (extrapolated) = 0.345 W/kg SAR(1 g) = 0.107 W/kg; SAR(10 g) = 0.056 W/kg Maximum value of SAR (measured) = 0.201 W/kg 0 dB = 0.201 W/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2019.07.06 07_LTE Band 4_20M_QPSK_3RB_0Offset_Back_0mm_Ch20175 Communication System: UID 0, LTE (0); Frequency: 1732.5 MHz;Duty Cycle: 1:1 Medium: HSL_1750_190706 Medium parameters used: f = 1732.5 MHz; = 1.36 S/m; r = 41.426;
= 1000 kg/m3 Ambient Temperature23.6 ; Liquid Temperature22.7 DASY5 Configuration:
- Probe: EX3DV4 - SN3819; ConvF(8.54, 8.54, 8.54); Calibrated: 2019.03.01;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn715; Calibrated: 2019.01.23
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch20175/Area Scan (71x111x1): Interpolated grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.103 W/kg Ch20175/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.241 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 0.155 W/kg SAR(1 g) = 0.061 W/kg; SAR(10 g) = 0.030 W/kg Maximum value of SAR (measured) = 0.0926 W/kg 0 dB = 0.0926 W/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2019.07.05 08_LTE Band 2_20M_QPSK_1RB_0Offset_Back_0mm_Ch18700 Communication System: UID 0, LTE (0); Frequency: 1860 MHz;Duty Cycle: 1:1 Medium: HSL_1900_190705 Medium parameters used: f = 1860 MHz; = 1.404 S/m; r = 40.204;
= 1000 kg/m3 Ambient Temperature23.7 ; Liquid Temperature22.4 DASY5 Configuration:
- Probe: EX3DV4 - SN3819; ConvF(8.27, 8.27, 8.27); Calibrated: 2019.03.01;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn715; Calibrated: 2019.01.23
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch18700/Area Scan (71x111x1): Interpolated grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.156 W/kg Ch18700/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.034 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 0.268 W/kg SAR(1 g) = 0.095 W/kg; SAR(10 g) = 0.041 W/kg Maximum value of SAR (measured) = 0.132 W/kg 0 dB = 0.132 W/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2019.07.11 09_WLAN2.4GHz_802.11b 1Mbps_Front_0mm_Ch1 Communication System: UID 0, WIFI (0); Frequency: 2412 MHz;Duty Cycle: 1:1.013 Medium: HSL_2450_190711 Medium parameters used: f = 2412 MHz; = 1.689 S/m; r = 40.929;
= 1000 kg/m3 Ambient Temperature23.4 ; Liquid Temperature22.7 DASY5 Configuration:
- Probe: EX3DV4 - SN3819; ConvF(7.21, 7.21, 7.21); Calibrated: 2019.03.01;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn715; Calibrated: 2019.01.23
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch1/Area Scan (81x141x1): Interpolated grid: dx=12mm, dy=12mm Maximum value of SAR (interpolated) = 0.245 W/kg Ch1/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 3.714 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 0.308 W/kg SAR(1 g) = 0.161 W/kg; SAR(10 g) = 0.072 W/kg Maximum value of SAR (measured) = 0.242 W/kg 0 dB = 0.242 W/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2019.07.11 10_WLAN5GHz_802.11a 6Mbps_Front_0mm_Ch60 Communication System: UID 0, WIFI (0); Frequency: 5300 MHz;Duty Cycle: 1:1.030 Medium: HSL_5250_190711 Medium parameters used: f = 5300 MHz; = 4.649 S/m; r = 36.574;
= 1000 kg/m3 Ambient Temperature23.6 ; Liquid Temperature22.5 DASY5 Configuration:
- Probe: EX3DV4 - SN3819; ConvF(5.07, 5.07, 5.07); Calibrated: 2019.03.01;
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn715; Calibrated: 2019.01.23
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch60/Area Scan (101x161x1): Interpolated grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 2.60 W/kg Ch60/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 0 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 4.24 W/kg SAR(1 g) = 0.808 W/kg; SAR(10 g) = 0.193 W/kg Maximum value of SAR (measured) = 2.37 W/kg 0 dB = 2.37 W/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2019.07.12 11_WLAN5GHz_802.11a 6Mbps_Front_0mm_Ch100 Communication System: UID 0, WIFI (0); Frequency: 5500 MHz;Duty Cycle: 1:1.030 Medium: HSL_5600_190712 Medium parameters used: f = 5500 MHz; = 4.888 S/m; r = 36.263;
= 1000 kg/m3 Ambient Temperature23.7 ; Liquid Temperature22.6 DASY5 Configuration:
- Probe: EX3DV4 - SN3819; ConvF(4.7, 4.7, 4.7); Calibrated: 2019.03.01;
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn715; Calibrated: 2019.01.23
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch100/Area Scan (101x161x1): Interpolated grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 2.79 W/kg Ch100/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 0 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 4.47 W/kg SAR(1 g) = 0.782 W/kg; SAR(10 g) = 0.181 W/kg Maximum value of SAR (measured) = 2.19 W/kg 0 dB = 2.19 W/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2019.07.12 12_WLAN5GHz_802.11a 6Mbps_Front_0mm_Ch149 Communication System: UID 0, WIFI (0); Frequency: 5745 MHz;Duty Cycle: 1:1.030 Medium: HSL_5750_190712 Medium parameters used: f = 5745 MHz; = 5.164 S/m; r = 35.837;
= 1000 kg/m3 Ambient Temperature23.6 ; Liquid Temperature22.8 DASY5 Configuration:
- Probe: EX3DV4 - SN3819; ConvF(4.77, 4.77, 4.77); Calibrated: 2019.03.01;
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn715; Calibrated: 2019.01.23
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch149/Area Scan (101x161x1): Interpolated grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 2.16 W/kg Ch149/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 0 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 3.33 W/kg SAR(1 g) = 0.556 W/kg; SAR(10 g) = 0.123 W/kg Maximum value of SAR (measured) = 1.62 W/kg 0 dB = 1.62 W/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2019.07.11 13_Bluetooth_DH5 1Mbps_Front_0mm_Ch0 Communication System: UID 0, Bluetooth (0); Frequency: 2402 MHz;Duty Cycle: 1:1.306 Medium: HSL_2450_190711 Medium parameters used: f = 2402 MHz; = 1.681 S/m; r = 40.955;
= 1000 kg/m3 Ambient Temperature23.4 ; Liquid Temperature22.7 DASY5 Configuration:
- Probe: EX3DV4 - SN3819; ConvF(7.21, 7.21, 7.21); Calibrated: 2019.03.01;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn715; Calibrated: 2019.01.23
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch0/Area Scan (81x131x1): Interpolated grid: dx=12mm, dy=12mm Maximum value of SAR (interpolated) = 0.0341 W/kg Ch0/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.765 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 0.0430 W/kg SAR(1 g) = 0.00894 W/kg; SAR(10 g) = 0.00324 W/kg Maximum value of SAR (measured) = 0.0172 W/kg 0 dB = 0.0341 W/kg FCC SAR Test Report Report No. : FA961801 Appendix C. DASY Calibration Certificate The DASY calibration certificates are shown as follows. Sporton International (Shenzhen) Inc. TEL : +86-755-86379589 / FAX : +86-755-86379595 FCC ID: V5PD190LTE Page : C1 of C1 Issued Date : Jul. 29, 2019 Form version : 181113
(cid:4162)
(cid:4162)(cid:2436)Add: No.51 Xueyuan Road, Tel:+86-lo-62304633-2079 E-mail: cttl@chinattl.com http://www.chinattl.cn Client Sporton Certificate No: Z18-60532
(cid:4559)(cid:1875)(cid:3242)(cid:2390)
(cid:1875)(cid:2109)(cid:1978)(cid:3242)
(cid:3950)(cid:4633) CALIBRATION CNAS L0570 Object D750V3-SN: 1099 Calibration Procedure^ FF-Z11-003-01 Calibration date: December 6, 2018 Calibration Procedures for dipole validation kits This calibration Certificate documents the traceability to national standards, which realize the physical units of measurements(SI). The measurements and the uncertainties with confidence probability are given on the following pages and are part ofthe certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature(22 3)c and humidity<70%. Calibration Equipment used (M&TE criticalfor calibration) Primary Standards D# Ca Date(Calibrated by, Certificate No.) Scheduled Caibration Power Meter NRVD Power sensor NRV-Z5 Reference Probe EX3DV4 DAE4 102196 07-Mar-18(CTTL,No.J18X01510) Mar-19 100596 07-Mar-18(CTTL, No.J18X01510) Mar-19 SN7514 27-Aug-18(SPEAG,No.EX3-7514_Aug18) Aug-19 SN1555 20-Aug-18(SPEAG,No.DAE4-1555_Aug18) Aug-19 Secondary Standards Signal Generator E4438C NetworkAnalyzer E5071C ID # Cal Date(Calibrated by, Certificate No.) Scheduled Calibration MY49071430 23-Jan-18 (CTTL, No.J18X00560) Jan-19 MY46110673 24-Jan-18 (CTTL, No.J18X00561) Jan-19 Name Function --Signature Calibrated by: ZhaoJing SAR Test Engineer ^><^^^ ,--
Reviewed by: Lin Hao SAR Test Engineer ^ \fi^^^'
Approved by: Qi Dianyuan SAR Project Leader ^^^fl{f ^
This calibration certificate shall not be reproduced exceptin full without written approval ofthe laboratory. Issued: December 9, 2018 Certificate No: Zl 8-60532 Page 1 of 8
^^^pB^^ @ fn Collaboration with
^^^^^~^^ CAUIHATIOM LADC BRATtON LABORATORY s p e a Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn Glossary:
TSL ConvF N/A tissue simulating liquid sensitivity in TSL / NORMx,y,z not applicable or not measured Calibration is Performed According to the Following Standards:
a) IEEE Std 1528-2013, "IEEE Recommended Practice for Determining the Peak Spatial-Averaged Specific Absorption Rate (SAR)in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209-1, "Measurement procedure for assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices- Part1: Device used nextto the ear(Frequency range of 300MHz to 6GHz)", July 2016 c) IEC 62209-2, "Procedure to measure the Specific Absorption Rate (SAR) For wireless communication devices used in close proximity to the human body (frequency range of 30MHz to 6GHz)", March 2010 d) KDB865664, SAR Measurement Requirements for100 MHz to 6 GHz Additional Documentation:
e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters:
@ Measurement Conditions: Further details are available from the Validation Report atthe end ofthe certificate. Allfigures stated in the certificate are valid atthe frequency indicated.
@ Antenna Parameters with TSL: The dipole is mounted with the spacerto position its feed point exactly below the center marking ofthe flat phantom section, with the arms oriented parallelto the body axis.
@ Feed PointImpedance and Return Loss: These parameters are measured with the dipole positioned underthe liquid filled phantom. The impedance stated is transformed from the measurement atthe SMA connectorto the feed point. The Return Loss ensures low reflected power. No uncertainty required.
@ Electrical Delay: One-way delay between the SMA connector and the antenna feed point. No uncertainty required.
@ SAR measured: SAR measured atthe stated antenna input power.
@ SAR normalized: SAR as measured, normalized to an input power of1 W atthe antenna connector.
@ SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of Measurement multiplied by the coverage factor k=2, which for a normal distribution Corresponds to a coverage probability of approximately 95%. Certificate No: Zl8-60532 Page 2 of8
^^g^^^tm^ @ In Collaboration with
'^^^!^~~^J CAJJiBRAHON LABC
(cid:896) (cid:3151) (cid:882) (cid:2095) -(cid:3151) BHAT1ON LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn Measurement Conditions DASY system configuration, as far as not given on page 1 DASY Version DASY52 52.lo.2.1495 Extrapolation Advanced Extrapolation Phantom Triple Flat Phantom 5.1C Distance Dipole Center- TSL 15 mm with Spacer Zoom Scan Resolution dx, dy, dz = 5 mm Frequency 750 MHz 1 MHz Head TSL parameters The following parameters and calculations were applied Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 C 41.9 0.89mho/m Measured Head TSL parameters (22.0 0.2) C 43.1 6% 0.87 mho/m 6 %
Head TSL temperature change during test <1.0C
(cid:845)(cid:845)(cid:845)(cid:845) (cid:845)(cid:845)(cid:845)(cid:845) SAR result with Head TSL SAR averaged over1 cm3 (1 g) of Head TSL Condition SAR measured 250 mW input power 2.07 mW/g SAR for nominal Head TSL parameters normalized to 1W 8.52 mW/g 18.8 %(k=2) SAR averaged over10 cm3 (lo g) of Head TSL Condition SAR measured 250 mW input power 1.38 mW/g SAR for nominal Head TSL parameters normalized to 1W 5.64 mW /g 18.7 % (k=2) Body TSL parameters The following parameters and calculations were applied Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 C 55.5 0.96 mho/m Measured Body TSL parameters (22.0 0.2) C 54.0 6 % 0.95mho/m 6%
Body TSL temperature change during test <1.0C
(cid:845)(cid:845)(cid:845)(cid:845) (cid:845)(cid:845)(cid:845)(cid:845) SAR result with Body TSL SAR averaged over1 cm3 (1 g) of Body TSL Condition SAR measured 250 mW input power 2.15 mW/g SAR for nominal Body TSL parameters normalized to 1W 8.61 mW/g 18.8%(k=2) SAR averaged over10 cm3 (lo g) of Body TSL Condition SAR measured 250 mW input power 1.44 mW/g SAR for nominal Body TSL parameters normalized to 1W 5.77 mW /g 18.7 % (k=2) Certificate No: Zl8-60532 Page 3 of8 In CoJtoboration with
(cid:3740) "
(cid:97)(cid:4162) Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn CALIBRATION LABORATORY Appendix (Additional assessments outside the scope of CNAS L0570) Antenna Parameters with Head TSL Impedance,transformed to feed point 54.2Q-1.12jQ Return Loss - 27.7dB Antenna Parameters with Body TSL Impedance,transformed to feed point 49.8Q- 3.37JQ Return Loss - 29.4dB General Antenna Parameters and Design Electrical Delay (one direction) 0.900 ns Afterlong term use with 100W radiated power, ony a slight warming ofthe dipole nearthe feedpoint can be measured. The dipole is made of standard semirigid coaxia cable. The center conductor ofthe feeding ine is directly connected to the second arm ofthe dipoe. The antenna is therefore short-circuited for DC-signas. On some ofthe dipoles, small end caps are added to the dipole arms in orderto improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overal dipole ength is still according to the Standard. No excessive force must be applied to the dipoe arms, because they might bend orthe soldered connections nearthe feedpoint may be damaged. II Additional EUT Data Manufactured by SPEAG Certificate No: Zl8-60532 Page 4 of8
(cid:3288)(cid:871)(cid:1066)
(cid:4162)"boration with
(cid:4162) s n e a CALJ BRAHOM LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn DASY5 Validation Reportfor Head TSL Date:12.0 Test Laboratory: CTTL, Beijing, China DUT: Dipole 750 MHz; Type: D750V3; Serial: D750V3 - SN: 1099 Date: 12.05.2018 Communication System: UID 0, CW; Frequency: 75G MHz; Duty Cycle: 1:1 Medium parameters used:f = 750 MHz; a = 0.865 S/m; r = 43.13; p = 1000 kg/m3 Phantom section: Right Section DASY5 Configuration:
. Probe: EX3DV4 - SN7514; ConvF(9.47, 9.47, 9.47) @ 750 MHz; Calibrated:
8/27/2018
@ Sensor-Surface: 1.4mm (Mechanical Surface Detection)
@ Electronics: DAE4 Snl555; Calibrated: 8/20/2018
. Phantom: MFP_V5.1C ; Type: QD 000 P51CA; Serial: 1062
. Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12
(7450) Dipole Calibration/Zoom Scan (7x7x7)(7x7x7)/Cube 0: Measurement grid: dx=5 dy^Smm, dz=5mm Reference Value = 53.37 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 3.12 W/kg SAR(1 g) = 2.07 W/kg; SAR(lo g) = 1.38 W/kg Maximum value of SAR (measured) = 2.75 W/kg
(cid:2808)
(cid:881)(cid:847)
(cid:829)
(cid:845)(cid:3108)(cid:99)9(cid:2580)
(cid:826)3.94
-5.91 7.88 9.85
@(cid:2946)"
0 dB = 2.75 W/kg = 4.39 dBW/kg Certificate No: Zl8-60532 Page 5 of 8
(cid:959) --(cid:2808)
(cid:2594)(cid:3918)(cid:4592)(cid:3227)(cid:1734) Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn Impedance Measurement Plotfor Head TSL Trl sll 50.00 40.00 30.00 20(cid:99)0(cid:829)
(cid:3698)0.00 0.000(cid:1249)
(cid:845)(cid:830)0.00
(cid:826)20. 00
(cid:826)30.00
(cid:845)4O(cid:99)00
(cid:826)5o(cid:273)(cid:829)0 Log Mag lO.OOdB/ Ref Q.QQQd [Fl]
7.676
(cid:881)B
(cid:98) l l "- "
i
(cid:273) l
- -(cid:4162) - - -
i (cid:273) i j
(cid:98) l " " " (cid:1506)- "
- - - i (cid:273) -(cid:4162)(cid:4162) - (cid:98) - - j - - -
(cid:1504)(cid:97)(cid:815);"";
188. "(cid:893)F(cid:3395)(cid:98) ;"L"
(cid:119) - - (cid:98) - (cid:273)
(cid:982)
(cid:1150)(cid:3008) sTT smith (R+3x) scale (cid:1789)(cid:99)ooou [Fl D(cid:1031)l]
(cid:1150)(cid:4598) (cid:836)50.00000 (cid:2946)HZ 54.155 (cid:860) (cid:826)1(cid:99)(cid:3698)(cid:831)42 (cid:829)
(cid:1150)
(cid:1580) Certificate No: Zl8-60532 Page 6 of 8 In Collaboration with s n e a CALIBRATION LABORATORY
(cid:4162)
(cid:4162)(cid:4157) Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn DASY5 Validation Reportfor Body TSL Date:12.05.2018 Test Laboratory: CTTL, Beijing, China DUT: Dipole 750 MHz; Type: D750V3; Serial: D750V3 - SN: 1099 Communication System: UID 0, CW; Frequency: 750 MHz; Duty Cycle: 1:1 Medium parameters used:f = 750 MHz; a = 0.951 S/m; sr = 54.02; p = 1000 kg/m3 Phantom section: Center Section DASY5 Configuration
@ Probe: EX3DV4 - SN7514; ConvF(9.68, 9.68, 9.68) @ 750 MHz; Calibrated:
8/27/2018
@ Sensor-Surface: 1.4mm (Mechanical Surface Detection)
@ Electronics: DAE4 Snl555; Calibrated: 8/20/2018
. Phantom: MFP_V5.1C ; Type: QD 000 P51CA; Serial: 1062
@ Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12
(7450) Dipole Calibration/Zoom Scan (7x7x7)(7x7x7)/Cube 0: Measurement grid: dx=5 dy^5mm, dz=5mm Reference Value = 51.51 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 3.29 W/kg SAR(1 g) = 2.15 W/kg; SAR(lo g) = 1.44 W/kg Maximum value of SAR (measured) = 2.88 W/kg
(cid:2808)
(cid:881)(cid:847)
(cid:3151)
-1.96
(cid:826)3.92
-5.89
-7.85
(cid:845)9(cid:99)8l 0 dB = 2.88 W/kg = 4.59 dBW/kg Certificate No: Zl 8-60532 Page 7 of 8
(cid:2750)(cid:864) ALIBRATION ollaboration with s p e a Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn
(cid:2850)(cid:846)(cid:2118)(cid:3569)(cid:3470)(cid:4162)(cid:1506)(cid:1733)(cid:3482)(cid:5373) Impedance Measurement Plotfor Body TSL
(cid:1565)
(cid:3199) Certificate No: Zl8-60532 Page 8 of 8 In Collaboration with (cid:3912)(cid:1561)
(cid:4559)(cid:1875)(cid:3242)(cid:2390)
(cid:1875)(cid:2109)(cid:1978)(cid:3242)
(cid:897)arn CALIBRATION CNAS L0570 Add: No.51 Xue(cid:902)uan Road, Haidian District, Beijing,100191, China
(cid:865)el:+86-lo-62304633-2079 Fax:+86-lo-62304633-2504
(cid:850)-mail: c(cid:4153)(cid:862)chinanl.com http://www.chinanl.cn '
(cid:3740)
(cid:4314)
(cid:99) (cid:864)port(cid:892)n (cid:97) (cid:99) (cid:99)(cid:99)"(cid:99)-;(cid:99)(cid:98) (cid:99) (cid:99)(cid:99)" (cid:273)(cid:99)(cid:99)(cid:99)(cid:99) (cid:99)(cid:99):(cid:848)ertificate No(cid:273);';(cid:840)(cid:99)(cid:273)(cid:3949)(cid:3844)(cid:99)(cid:837)-6053 Client Object D835V2-SN:4d162 Calibration Procedure(s) FF-Z11-003-01 Calibration date: December 5, 2018 Calibration Procedures for dipole validation kits This calibration Certificate documents the traceability to national standards, which realize the physical units of measurements(SI). The measurements and the uncertainties with confidence probability are given on the following pages and are part ofthe certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature(22 3)c and humidity<70%. Calibration Equipment used (M&TE criticalfor calibration) Primary Standards ID # Cal Date(Calibrated by, Certificate No.) Scheduled Calibration Primary Standards Power Meter NRVD I 102196 07-Mar-18 (CTTL, NO.J18X01510) Mar-19 Power Meter NRVD Power sensor NRV-Z5 100596 07-Mar-18 (CTTL, No.J 18X01510) Mar-19 Power sensor NRV-Z5 Reference Probe EX3DV4 SN7514 27-Aug-18(SPEAG,No.EX3-7514_Aug18) Aug-19 Reference Probe EX3DV4 DAE4 SN 1555 20-Aug-18(SPEAG,No.DAE4-1555_Aug18) Aug-19 DAE4 Secondary Standards ID # Cal Date(Calibrated by, Certificate No.) Scheduled Calibration Secondary Standards Signal Generator E4438C MY49071430 23-Jan-18 (CTTL, No.J 18X00560) Jan-19 Signal Generator E4438C NetworkAnalvzerE5071C MY46110673 24-Jan-18 (CTTL, No.J18X00561) Jan-19 NetworkAnalyzer E5071C Calibrated by: ZhaoJing SAR Test Engineer .^(cid:4142)(cid:1511) "*^^
Name Function ;;^ Signature Reviewed by: Lin Hao SAR Test Engineer ^. ^t^J^
Approved by: Qi Dianyuan SAR Project Leader ^^^\ ^
This calibration certificate shall not be reproduced exceptin full without written approval ofthe laboratory. Issued: December 8, 2018 Certificate No: Zl8-60533 Page 1 of 8
(cid:2750) In Collaboration with s d e a
(cid:1139)(cid:2447)(cid:4560)(cid:846)(cid:1354)Q(cid:2209) Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn Glossary:
TSL ConvF N/A tissue simulating liquid sensitivity in TSL / NORMx.y.z not applicable or not measured Calibration is Performed According to the Following Standards:
a) IEEE Std 1528-2013, "IEEE Recommended Practice for Determining the Peak Spatial-Averaged Specific Absorption Rate (SAR)in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b)IEC 62209-1, "Measurement procedure for assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices- Part1: Device used nextto the ear(Frequency range of 300MHz to 6GHz)", July 2016 c)IEC 62209-2, "Procedure to measure the Specific Absorption Rate (SAR) For wireless communication devices used in close proximity to the human body (frequency range of 30MHz to 6GHz)", March 2010 d)KDB865664, SAR Measurement Requirements for100 MHz to 6 GHz Additional Documentation:
e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters:
@ Measurement Conditions: Further details are available from the Validation Report atthe end ofthe certificate. Allfigures stated in the certificate are valid atthe frequency indicated.
@ Antenna Parameters with TSL: The dipole is mounted with the spacerto position its feed point exactly below the center marking ofthe flat phantom section, with the arms oriented parallelto the body axis.
@ Feed PointImpedance and Return Loss: These parameters are measured with the dipole positioned underthe liquid filled phantom. The impedance stated is transformed from the measurement atthe SMA connectorto the feed point. The Return Loss ensures low reflected power. No uncertainty required.
@ Electrical Delay: One-way delay between the SMA connector and the antenna feed point. No uncertainty required.
@ SAR measured: SAR measured atthe stated antenna input power.
@ SAR normalized: SAR as measured, normalized to an input power of1 W atthe antenna connector.
@ SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of Measurement multiplied by the coverage factor k=2, which for a normal distribution Corresponds to a coverage probability of approximately 95%. Certificate No: Zl 8-60533 Page 2 of 8
(cid:4162)
(cid:4162)(cid:3288)(cid:871)(cid:871)(cid:1431) In Collaboration with s 0 CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn Measurement Conditions DASY system configuration, as far as not given on page 1 DASY Version DASY52 52.lo.2.1495 Extrapolation Advanced Extrapolation Phantom Triple Flat Phantom 5.1C Distance Dipole Center- TSL 15 mm with Spacer Zoom Scan Resolution dx, dy, dz = 5 mm Frequency 835 MHz 1 MHz Head TSL parameters The following parameters and calculations were applied Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 C 4(cid:5373)5 0.90 mho/m Measured Head TSL parameters (22.0 0.2) C 42.7 6 % 0.88 mho/m 6 %
Head TSL temperature change during test (cid:4228) 0 (cid:98)c (cid:845)(cid:845)(cid:845)(cid:845) (cid:845)(cid:845)(cid:845)(cid:845) SAR result with Head TSL SAR averaged over1 cm3 (1 g) of Head TSL Condition SAR measured 250 mW input power 2.35 mW/g SAR for nominal Head TSL parameters normalized to 1W 9.61 mW/g 18.8%(k=2) SAR averaged over10 cm3 (lo g) of Head TSL Condition SAR measured 250 mW input power 1.56mW/g SAR for nominal Head TSL parameters normalized to 1W 6.35 mW/g 18.7 % (k=2) Body TSL parameters The following parameters and calculations were applied Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 C 55.2 0.97 mho/m Measured Body TSL parameters (22.0 0.2) C 53.7 6 % 0.99 mho/m 6 %
Body TSL temperature change during test (cid:4228) 0 (cid:98)c (cid:845)(cid:845)(cid:845)(cid:845) (cid:845)(cid:845)(cid:845)(cid:845) SAR result with Body TSL SAR averaged over1 cm3 (1 g) of Body TSL Condition SAR measured 250 mW input power 2.47 mW/g SAR for nominal Body TSL parameters normalized to 1W 9.70 mW/g 18.8 % (k=2) SAR averaged over10 cm3 (lo g) of Body TSL Condition SAR measured 250 mW input power 1.64 mW/g SAR for nominal Body TSL parameters normalized to 1W 6.47 mW/g 18.7 % (k=2) Certificate No: Zl 8-60533 Page 3 of 8 Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel:+86-lo-62304633-2079 Fax:+86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn Appendix (Additional assessments outside the scope of CNAS L0570) Antenna Parameters with Head TSL Impedance,transformed to feed point 52.6Q- 2.56JQ Return Loss - 28.9dB Antenna Parameters with Body TSL Impedance,transformed to feed point 47.2Q- 6.92JQ Return Loss - 22.3dB General Antenna Parameters and Design Electrical Delay (one direction) 1.306 ns Afterlong term use with 100W radiated power, only a sight warming ofthe dipoe nearthe feedpoint can be measured The dipole is made of standard semirigid coaxial cable. The center conductor ofthe feeding line is directly connected to the second arm ofthe dipole. The antenna is therefore short-circuited for DC-signals. On some ofthe dipoes, smal end caps are added to the dipole arms in orderto improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overal dipole ength is stil according to the Standard. No excessive force must be applied to the dipoe arms, because they might bend orthe soldered connections nearthe feedpoint may be damaged Additional EUT Data Manufactured by SPEAG Certificate No: Zl8-60533 Page 4 of 8 In Collaboration with s i e a CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn DASY5 Validation Reportfor Head TSL Date:12.04 2018 Test Laboratory: CTTL, Beijing, China DUT: Dipole 835 MHz; Type: D835V2; Serial: D835V2 - SN: 4dl62 Communication System: UID 0, CW; Frequency: 835 MHz; Duty Cycle: 1:1 Medium parameters used:f = 835 MHz; a = 0.881 S/m; sr = 42.71; p = 1000 kg/m3 Phantom section: Right Section DASY5 Configuration
. Probe: EX3DV4 - SN7514; ConvF(9.09, 9.09, 9.09) @ 835 MHz; Calibrated:
8/27/2018
@ Sensor-Surface: 1.4mm (Mechanical Surface Detection)
@ Electronics: DAE4 Snl555; Calibrated: 8/20/2018
@ Phantom: MFP_V5.1C ; Type: QD 000 P51CA; Serial: 1062
@ Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12
(7450) Dipole Calibration/Zoom Scan (7x7x7)(7x7x7)/Cube 0: Measurement grid: dx=5 dy=5mm, dz=5mm Reference Value = 57.75 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 3.50 W/kg SAR(1 g) = 2.35 W/kg; SAR(lo g) = 1.56 W/kg Maximum value of SAR (measured) = 3.11 W/kg
(cid:2808) dB
(cid:857)
-2.04
-4.08
(cid:845)6(cid:99)l2
-8.16
-10.20 0 dB = 3.11 W/kg = 4.93 dBW/kg Certificate No: Z18-60533 Page 5 of8 In Collaboration with
(cid:896) (cid:2373)-
CAU BRAT1ONLABORATOR^
(cid:4162)
(cid:3815) Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn
(cid:180)
(cid:3430) Impedance Measurement Plotfor Head TSL
(cid:99) ;
(cid:4162) i (cid:4162)(cid:845)(cid:845) (cid:4162)(cid:845) (cid:845) (cid:4162)(cid:2209)(cid:4162)(cid:4162) (cid:4162) (cid:4162) (cid:4162)
(cid:845) (cid:845) (cid:886)
(cid:845) "" "
(cid:826) (cid:826); 1 "@
(cid:1703) Certificate No: Zl8-60533 Page 6 of 8 In Collaboration with s p e a c CAUBRATION LABORATO^
Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn DASY5 Validation Reportfor Body TSL Date:12. Test Laboratory: CTTL, Beijing, China DUT: Dipole 835 MHz; Type: D835V2; Serial: D835V2 - SN: 4dl62 Date: 12(cid:99)O4(cid:99)2018 Communication System: UID 0, CW; Frequency: 835 MHz; Duty Cycle: 1:1 Medium parameters used:f^ 835 MHz; a = 0.986 S/m; er = 53.72; p = 1000 kg/m3 Phantom section: Center Section DASY5 Configuration:
. Probe: EX3DV4 - SN7514; ConvF(9.47,.9.47, 9.47) @ 835 MHz; Calibrated:
8/27/2018
@ Sensor-Surface: 1.4mm (Mechanical Surface Detection)
. Electronics: DAE4 Snl555; Calibrated: 8/20/2018
@ Phantom: MFP_V5.1C ; Type: QD 000 PS1CA; Serial: 1062
@ Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12
(7450) Dipole Calibration/Zoom Scan (7x7x7)(7x7x7)/Cube 0: Measurement grid: dx=5 dy=5mm, dz=5mm Reference Value = 55.24 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 3.72 W/kg SAR(1 g) = 2.47 W/kg; SAR(lo g) = 1.64 W/kg Maximum value of SAR (measured) = 3.29 W/kg
(cid:2808) dB 0 2.02
(cid:833)(cid:99)03 6(cid:99)05 8(cid:99)06 10.08 0 dB = 3.29 W/kg = 5.17 dBW/kg Certificate No: Zl8-60533 Page 7 of 8
(cid:2866)
(cid:3492)(cid:3030)(cid:2996)(cid:1397)0n(cid:1699)(cid:2060)
(cid:3151) (cid:882) (cid:1733) (cid:4639)
(cid:1384)(cid:4162)(cid:2520)CAUBRATIOIW (cid:846)BORATOB Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn Impedance Measurement Plotfor Body TSL
(cid:2850)
(cid:4175) Tr(cid:1506) S(cid:3151) 5OlO 0 40. oo 3o.oo 2 0. 00 10.00 0.000(cid:273)
-lo(cid:99)00
(cid:826)20.00
-30.00
-40.00
(cid:826)50.00
(cid:838)(cid:829)
(cid:863)(cid:828)(cid:3248)(cid:3248)(cid:892)(cid:829)(cid:829)(cid:1789)(cid:3248)(cid:878)
(cid:589)(cid:3698)(cid:857)(cid:847)(cid:3248)(cid:829)(cid:829)(cid:829)(cid:829)
(cid:1732)
(cid:1596)
(cid:845)
(cid:353)
(cid:865)
(cid:886)
(cid:1150)(cid:3008) ST(cid:3336) (cid:896)mith CR+(cid:2539)x) (cid:896)cale (cid:3336)(cid:99)000U (cid:872)F(cid:1506) Del]
(cid:845)
(cid:2762)
(cid:853)
(cid:867)
(cid:4162)
(cid:845)
(cid:845)
(cid:982)
(cid:1228)
(cid:845)
(cid:830)
(cid:886)
(cid:845)
(cid:889)
(cid:830)
(cid:866)(cid:886)
(cid:845)
(cid:845)
(cid:886)
(cid:887)
(cid:1505) 835.00000 MHz 47.204 (cid:829) -6.92
(cid:4162)
(cid:1610) Certificate No: Zl8-60533 Page 8 of 8
(cid:1626) (cid:892) e a
(cid:4567)(cid:1789)(cid:2744)(cid:3258)
(cid:4162)In Collaboration with E-mail: cttl@chinattl.com http://www.chinattl.cn (cid:2204)(cid:848)
(cid:4162)(cid:4162) Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 Cl;ent spo(cid:3400)oon (cid:99) (cid:99)(cid:99)"(cid:99)(cid:122)(cid:840)(cid:99)@ (cid:3722)(cid:3059)(cid:1608)*te(cid:99)N(cid:2209) @ (cid:4474)8(cid:3456)o2(cid:3810)
(cid:4559)(cid:3650)(cid:3242)(cid:2390)
(cid:1875)(cid:2109)(cid:1978)(cid:3242)
(cid:3950)(cid:4633) CALIBRATION CNAS L0570 Object D1750V2-SN:1137 Calibration Procedure(s) FF-Z11-003-01 Calibration Procedures for dipole validation kits Calibration date July 30, 2018 This calibration Certificate documents the traceability to national standards, which realize the physical units of measurements(SI). The measurements and the uncertainties with confidence probability are given on the following pages and are part ofthe certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature(22 3)c and humidity<70%. Calibration Equipment used (M&TE criticalfor calibration) Primary Standards Power Meter NRVD Power sensor NRV-Z5 Reference Probe EX3DV4 DAE4 1D#
102083 100542 SN 7464 SN 1524 Cal Date(Calibrated by, Certificate No.) 01-Nov-17 (CTTL, NO.J17X08756) 01-Nov-17 (CTTL, NO.J17X08756) 12-Sep-17(SPEAG,No.EX3-7464_Sep17) 13-Sep-17(SPEAG,No.DAE4-1524_Sep17) Scheduled Calibration Oct-18 Oct-18 Sep-18 Sep-18 Secondary Standards Signal Generator E4438C NetworkAnalyzer E5071C MY49071430 MY46110673 Cal Date(Calibrated by, Certificate No.) 23-Jan-18 (CTTL, No.J18X00560) 24-Jan-18 (CTTL, No.J18X00561) Scheduled Calibration Jan-19 Jan-19 Calibrated by Name Zhao Jing Function SAR Test Engineer Reviewed by Lin Hao SAR Test Engineer Approved by Qi Dianyuan SAR Project Leader This calibration certificate shall not be reproduced exceptin full without written approval ofthe laboratory
(cid:1557)
(cid:573)Issued: August 3, 2018 Signature
(cid:4670)
(cid:826)(cid:1397)(cid:2810)(cid:1228)(cid:815)(cid:99)(cid:99)(cid:99)(cid:2850)
(cid:815) Certificate No: Zl 8-60258 Page 1 of 8
| 1 2 3 4 5 | SAR report part 2 | RF Exposure Info | 3.74 MiB | August 02 2019 / August 05 2019 |
In Collaboration with s (cid:1937)"(cid:3087) Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn Glossary:
TSL ConvF N/A tissue simulating liquid sensitivity in TSL / NORMx.y.z not applicable or not measured Calibration is Performed According to the Following Standards:
a)IEEE Std 1528-2013, "IEEE Recommended Practice for Determining the Peak Spatial-Averaged Specific Absorption Rate (SAR)in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b)IEC 62209-1, "Measurement procedure for assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices- Part1: Device used nextto the ear(Frequency range of 300MHz to 6GHz)", July 2016 c)IEC 62209-2, "Procedure to measure the Specific Absorption Rate (SAR) For wireless communication devices used in close proximity to the human body (frequency range of 30MHz to 6GHz)", March 2010 d)KDB865664, SAR Measurement Requirements for100 MHz to 6 GHz Additional Documentation:
e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters:
@ Measurement Conditions: Further details are available from the Validation Report atthe end ofthe certificate. Allfigures stated in the certificate are valid atthe frequency indicated.
@ Antenna Parameters with TSL: The dipole is mounted with the spacerto position its feed point exactly below the center marking ofthe flat phantom section, with the arms oriented parallelto the body axis.
@ Feed PointImpedance and Return Loss: These parameters are measured with the dipole positioned underthe liquid filled phantom. The impedance stated is transformed from the measurement atthe SMA connectorto the feed point. The Return Loss ensures low reflected power. No uncertainty required.
@ Electrical Delay: One-way delay between the SMA connector and the antenna feed point. No uncertainty required.
@ SAR measured: SAR measured atthe stated antenna input power.
@ SAR normalized: SAR as measured, normalized to an input power of1 W atthe antenna
@ SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the connector. nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of Measurement multiplied by the coverage factor k=2, which for a normal distribution Corresponds to a coverage probability of approximately 95%. Certificate No: Zl 8-60258 Page 2 of 8 E-mail: cttl@chinattl.com ttp: www.c na . Measurement Conditions DASY system configuration, as far as not given on page 1 I DASY Version DASYJ DASY52 52.lo.1.1476 Extrapolation Advanced Extrapolation Phantom Distance Dipole Center- TSL lo mm with Spacer Triple Flat Phantom 5.1 C Zoom Scan Resolution Frequency dx, dy, dz = 5 mm 1750 MHz 1 MHz Head TSL parameters The following parameters and calculations were applied Nominal Head TSL parameters Measured Head TSL parameters (2 Temperature Permittivity Conductivity 22.0 C 40.1 1.37 mho/m
(22.0 0.2) C 41.2 6 % 1.33mho/m 6%
Head TSL temperature change during test
(cid:1507) 0C (cid:845)(cid:845)(cid:845)(cid:845)
(cid:845)(cid:845)(cid:845)(cid:845) SAR averaged over1 cm^ (1 g) of Head TSL SAR measured SAR for nominal Head TSL parameters Condition 250 mW input power 8.91 mW / g normalized to 1W 36.5 mW/g 18.8 %(k=2) SAR averaged over10 crrf1 (lo g) of Head TSL Condition SAR measured SAR for nominal Head TSL parameters 250 mW input power 4.81 mW / g normalized to 1W 19.5 mW/g 18.7 % (k=2) Body TSL parameters The following parameters and calculations were applied Nominal Body TSL parameters <^.u ^
i Temperature Permittivity Conductivity 22.0 C 53.4 1.49 mho/m
(22.0 0.2) C 53.8 6 % 1.48 mho/m 6 %
Body TSL temperature change during test <1.0 C
<1.0C (cid:845)(cid:845)(cid:845)(cid:845)
(cid:845)(cid:845)(cid:845)(cid:845) SAR averaged over1 cm^ (1 g) of Body TSL Condition Condition SAR measured 250 mW input pow^
SAR for nominal Body TSL parameters normalized to 1W 250 mW input power 9.17 mW/g normalized to 1W 37.0 mW/g 18.8 %(k=2) SAR averaged over10 cm3 (lo g) of Body TSL Condition Condition SAR measured 250 mW input powi 250 mW input power 5.05 mW / g SAR for nominal Body TSL parameters normalized to 1W 20.3 mW/g 18.7 % (k=2) Certificate No: Zl 8-60258 Page 3 of 8
(cid:3029) (cid:829)
(cid:4162)In ""(cid:98)n with
(cid:4567)(cid:1789)(cid:2744)(cid:1822) a
(cid:4162)(cid:4162) Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn Appendix (Additional assessments outside the scope of CNAS L0570) Antenna Parameters with Head TSL Impedance,transformed to feed point Return Loss Antenna Parameters with Body TSL Impedance,transformed to feed point Return Loss General Antenna Parameters and Design 50.3-0.87 j(cid:860)
- 40.7 dB 44.8Q-2.59(cid:3008)
- 24.3 dB Electrical Delay (one direction) (cid:830).087 ns Afterlong term use with 100W radiated power, only a slight warming ofthe dipole nearthe feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor ofthe feeding line is directly connected to the second arm ofthe dipole. The antenna is therefore short-circuited for DC-signals. On some ofthe dipoles, small end caps are added to the dipole arms in orderto improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend orthe soldered connections nearthe feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Certificate No: Zl8-60258 Page 4 of 8
(cid:3740) InColta S J boration with e ^a Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn DASY5 Validation Reportfor Head TSL Date: 07.30.2018 Test Laboratory: CTTL, Beijing, China DUT: Dipole 1750 MHz; Type: D1750V2; Serial: D1750V2 - SN:1137 Communication System: UID 0, CW; Frequency: 1750 MHz; Duty Cycle: 1:1 Medium parameters used:f = 1750 MHz; o = 1.332 S/m; ex = 41.17; p = 1000 kg/m3 Phantom section: Center Section DASY5 Configuration
(cid:99) Probe: EX3DV4 - SN7464; Co(cid:868)vF(8.7, 8.7, 8.7) (cid:862)1750 MHz; Calibrated:
9/12/2017
(cid:99) Sensor-Surface:1.4mm (Mechanical Surface Detection)
. (cid:850)lectronics: DAE4 Snl524; Calibrated: 9/13/2017
(cid:99) Phantom: MFP_V5.1C ; Type: QD 000 P51CA; Serial:1062
(cid:99) Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11
(7439) System Performance Check/Zoom Scan (7x7x7)(7x7x7)/Cube 0: Measurement grid dx=5mm, dy=5mm, dz=5mm Reference Value = 96.50 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 16.1 W/kg SAR(1 g) = 8.91 W/kg; SAR(lo g) = 4.81 W/kg Maximum value of SAR (measured) = 13.5 W/kg
(cid:881)(cid:847) 3.25 6(cid:99)50
-9.74
-12.99
-16.24 0 dB = 13.5 W/kg = 11.30 dBW/kg Certificate No: Zl 8-60258 Page 5 of 8
(cid:1263)
(cid:1591) Collaboration
(cid:2750) (cid:4413)
(cid:4162) Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn Impedance Measurement Plotfor Head TSL T(cid:3699) (cid:2539)l Log Mag lQ.QQdB/ Ref Q-QoodB lFl]
50.00 1 x.7500000 GHZ (cid:826)40.740 dB 4000 30.00 20.00 10.00 0.000^
(cid:833)0.00
(cid:831)0.00
(cid:826)30.00
(cid:826)40.00
(cid:826)50o0
@(cid:3008) s(cid:2808) smith (cid:821)R+jx) scale l.ooou [FT Del]
(cid:843)1 1.75Q0OO0 GH2 50.289 ? (cid:826)874.57 mQ 103
(cid:3650)
(cid:4470) Certificate No: Zl 8-60258 Page 6 of 8
^^pPBKft^s^ In Collaboration with
(cid:4567)(cid:1789)(cid:2744)(cid:3398) jg o e a Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn DASY5 Validation Reportfor Body TSL Test Laboratory. CTTL, Beijing, China DUT: Dipole 1750 MHz; Type: D1750V2; Serial: D1750V2 - SN:1137 Date: 07(cid:99)30(cid:99)20l8 Communication System: UID 0, CW; Frequency:1750 MHz; Duty Cycle:1:1 Medium parameters used:f = 1750 MHz; a = 1.477 S/m; sr = 53.84; p = 1000 kg/m3 Phantom section: Left Section DASY5 Configuration:
. Probe: (cid:850)X3DV4 - SN7464; ConvF(8.6, 8.6, 8.6) (cid:862)1750 MHz; Calibrated:
9/12/2017
(cid:99) Sensor-Surface:1.4mm (Mechanical Surface Detection)
. (cid:850)lectronics: DAE4 Snl524; Calibrated: 9/13/2017
(cid:99) Phantom: MFP_V5.1C ; Type: QD 000 P51CA; Serial:1062
. Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11
(7439) System Performance Check/Zoom Scan (7x7x7)(7x7x7)/Cube 0: Measurement grid dx=5mm, dy=5mm, dz=5mm Reference Value = 77.55 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 16.0 W/kg SAR(1 g) = 9.17 W/kg; SAR(lo g) = 5.05 W/kg Maximum value of SAR (measured) =13.7 W/kg 3(cid:99)06 6.13
-9.19
-12.26
-15.32 0 dB = 13.7 W/kg = 11.37 dBW/kg Certificate No: Zl 8-60258 Page 7 of 8
(cid:4162)
(cid:1597)(cid:871)(cid:4579)(cid:871)
(cid:1073)
(cid:7716)(cid:864) Collaboration with Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn Impedance Measurement Plotfor Body TSL Tr(cid:1506) (cid:951)(cid:1789) Log Mag lO.OOdB/ Ref O.OOOdB [Fl]
(cid:834)O(cid:99)00 40(cid:99)00 30.00
(cid:831)0(cid:99)O0
(cid:830)0.00 0.000(cid:4350)
(cid:4162)(cid:1789)0(cid:99)00
-20.00
-30.00
-40.00
>1 1.7500000 GHZ -24.255 dB
(cid:826)(cid:4162) (cid:273)"
(cid:4162)(cid:97)(cid:3650) @-(cid:4162)-(cid:826) "
(cid:4162)(cid:4162)(cid:273)
(cid:3432)
(cid:826)(cid:826) '
-50.00
? HE sll smith (R+jx) scale l.OOOU [Fl Del]
>1 1.7500000 GHZ 44.801 Q -2.5948 D 35.04 -pF" ~~"~^^
(cid:1504)(cid:845)(cid:3414) (cid:4162)(cid:99)(cid:97) (cid:1462)8@a(cid:2692)(cid:1898)(cid:1138)(cid:2159)(cid:2487)(cid:4162)MMM(cid:4592)mMM(cid:4162)mM@@Q (cid:99) @@(cid:4162)@(cid:4162)(cid:4162)(cid:4162)(cid:4162)"(cid:4162) -(cid:4162)(cid:99)(cid:4162)(cid:4162)(cid:102)(cid:4162)(cid:4162)-(cid:4162)(cid:845)
(cid:3193) Certificate No: Zl8-60258 Page 8 of 8
(cid:3300) in Collaboration with Add: No.51 Xue(cid:902)uan (cid:863)oad, Hadian District, Beijing,100191, China Tel:+86-lo-62304633-2079 Fax:+86-lo-62304633-2504
(cid:850)-mail: c(cid:4063)(cid:862)china(cid:2733)l.com http://www.china(cid:2798)l.cn
(cid:2222)(cid:3492) Certificate No: Z18-60536 CALIBRATION CNAS L0570 Client ; (cid:4230)(cid:829)(cid:3651)(cid:829)(cid:1354) (cid:99) (cid:99) (cid:99)"(cid:99) (cid:98)(cid:98);(cid:99)
(cid:99) (cid:99) (cid:99) Object D1900V2-SN:5d182 Calibration Procedure(s) (cid:2317)F-Z11-003-0
(cid:848)alibration (cid:861)rocedures for (cid:99)dipole Xvalidation (cid:888)its
(cid:99) (cid:99) (cid:99)(cid:273) (cid:99) (cid:273) (cid:99) (cid:98) (cid:99) (cid:273) (cid:273)(cid:98) (cid:102) (cid:99) (cid:99)
(cid:273)(cid:273)
(cid:99)-
Calibration date December 7, 2018 This calibration Certificate documents the traceability to national standards, which realize the physical units of measurements(SI). The measurements and the uncertainties with confidence probability are given on the following pages and are p^rt ofthe certificate. All calibrations have been conducted in the closed laboratory facility, environment temperature(22 3)c and humidity<70%. Calibration Equipment used (M&TE criticalfor calibration) Power Meter NRVD Power sensor NRV-Z5 Reference Probe EX3DV4 DAE4 ID#
102196 100596 SN7514 SN 1555 Secondary Standards Signal Generator E4438C NetworkAnalyzer E5071C MY49071430 MY46110673 Cal Date(Calibrated by, Certificate No) 07-Mar-18 (CTTL, No.J18X01510) 07-Mar-18 (CTTL, NO.J18X01510) 27-Aug-18(SPEAG,No.EX3-7514_Aug18) 20-Aug-18(SPEAG,No.DAE4-1555_Aug18) Scheduled Calibration Mar-19 Mar-19 Aug-19 Aug-19 Cal Date(Calibrated by, Certificate No.) 23-Jan-18 (CTTL, No.J18X00560) 24-Jan-18 (CTTL, NO.J18X00561) Scheduled Calibration Jan-19 Jan-19 Calibrated by Name Zhao Jing Reviewed by Lin Wao Function SAR Test Engineer SAR Test Engineer Approved by Qi Dianyuan SAR Project Leader Issued: December10, 2018 This calibration certificate shall not be reproduced exceptin full without written approval ofthe laboratory Certificate No: Zl8-60536 Page 1 of 8
(cid:2297)
(cid:1937)(cid:3300)Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China taborationwith o e a Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn
(cid:4162)(cid:815)
(cid:4338) lossary:
TSL ConvF N/A tissue simulating liquid sensitivity in TSL / NORMx.y.z not applicable or not measured Calibration is Performed According to the Following Standards:
a)IEEE Std 1528-2013, "IEEE Recommended Practice for Determining the Peak Spatial-Averaged Specific Absorption Rate (SAR)in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b)IEC-62209-1, "Measurement procedure for assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices- Part1: Device used nextto the ear(Frequency range of 300MHzto 6GHz)", July 2016 c)IEC 62209-2, "Procedure to measure the Specific Absorption Rate (SAR) For wireless communication devices used in close proximity to the human body (frequency range of 30MHz to 6GHz)", March 2010 d)KDB865664, SAR Measurement Requirements for100 MHz to 6 GHz Additional Documentation:
e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters:
@ Measurement Conditions: Further details are available from the Validation Report atthe end ofthe certificate. Allfigures stated in the certificate are valid atthe frequency indicated.
@ Antenna Parameters with TSL: The dipole is mounted with the spacerto position its feed point exactly below the center marking ofthe flat phantom section, with the arms oriented parallelto the body axis.
@ Feed PointImpedance and Return Loss: These parameters are measured with the dipole positioned underthe liquid filled phantom. The impedance stated is transformed from the measurement atthe SMA connectorto the feed point. The Return Loss ensures low reflected power. No uncertainty required.
@ Electrical Delay: One-way delay between the SMA connector and the antenna feed point. No uncertainty required.
@ SAR measured: SAR measured atthe stated antenna input power.
@ SAR normalized: SAR as measured, normalized to an input power of1 W atthe antenna
@ SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the connector. nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of Measurement multiplied by the coverage factor k=2, which for a normal distribution Corresponds to a coverage probability of approximately 95%. Certificate No: Zl 8-60536 Page 2 of 8 In Collaboration with E-mail: cttl@chinattl.com http:/www.c na .cn Measurement Conditions DASY system configuration, as far as not given on page 1 DASY Version DASY52 Extrapolation Advanced Extrapolation 52.lo.2.1495 Triple Flat Phantom 5.1C Phantom Distance Dipole Center- TSL lo mm with Spacer Zoom Scan Resolution dx, dy, dz = 5 mm 1900 MHz 1 MHz Frequency Head TSL parameters The following parameters and calculations were applied Nominal Head TSL parameters Measured Head TSL parameters (^
Temperature Permittivity Conductivity 22.0 C 40.0 1.40 mho/m
(22.0 0.2) C 39.6 6 % 1.44 mho/m 6 %
Head TSL temperature change during test
(cid:4350) 0C (cid:845)(cid:845)(cid:845)(cid:845) (cid:845)(cid:845)(cid:845)(cid:845) SAR result with Head TSL SAR averaged over1 cm3 (1 g) of Head TSL SAR measured SAR for nominal Head TSL parameters Condition 250 mW input power 10.1 mW/g normalized to 1W 39.6 mW/g (cid:824)48.8 (cid:818)(k=(cid:2043) SAR averaged over10 cm3 (lo g) of Head TSL Condition SAR measured SAR for nominal Head TSL parameters 250 mW input power 5.25 mW / g normalized to 1W 20.7 mW/g 18.7 %(k=2) Body TSL parameters The following parameters and calculations were applied Nominal Body TSL parameters ^z.u ^
Measured Body TSL parameters (22.0 0.2) C 51.i
(22.0 0.2) C 51.8 6% 1.56 mho/m 6 %
Temperature Permittivity Conductivity 22.0 C 53.3 1.52 mho/m Body TSL temperature change during test <1.0 C
<1.0C (cid:845)(cid:845)(cid:845)(cid:845) (cid:845)(cid:845)(cid:845)(cid:845) SAR averaged over1 cm^ (1 g) of Body TSL Condition Condition SAR measured 250 mW input powc SAR for nominal Body TSL parameters normalized to 1W 250 mW input power 10.2 mW/g normalized to 1W 39.9 mW /g 18.8 % (k=2) SAR averaged over10 cm3 (log)of Body TSL Condition Condition SAR measured 250 mW input powi 250 mW input power 5.31 mW/g SAR for nominal Body TSL parameters normalized to 1W 20.9 mW /g + 18.7 % (k=2) Certificate No: Zl 8-60536 Page 3 of 8
(cid:4162)""boration with
(cid:864)P(cid:1789)(cid:2744)(cid:2862) s e a
(cid:4162) Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn CALIBRATION LABORATORY Appendix (Additional assessments outside the scope of CNAS L0570) Antenna Parameters with Head TSL Impedance,transformed to feed point Return Loss Antenna Parameters with Body TSL Impedance,transformed to feed point Return Loss General Antenna Parameters and Design 52.1Q+5.351n
- 25(cid:99)0dB 48.9(cid:862)+6.19j(cid:860)
- 24(cid:99)0dB Electrical Delay (one direction) 1.067 ns Afterlong term use with 100W radiated power, only a slight warming ofthe dipole nearthe feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor ofthe feeding line is directly connected to the second arm ofthe dipole. The antenna is therefore short-circuited for DC-signals. On some ofthe dipoles, small end caps are added to the dipole arms in orderto improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend orthe soldered connections nearthe feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Certificate No: Zl 8-60536 Page 4 of 8
(cid:4567)(cid:1789)(cid:2744)(cid:4510) s p e a(cid:4162)In Collaboration with
(cid:4162) CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn DASY5 Validation Reportfor Head TSL ^aic. x^.v Test Laboratory: CTTL, Beijing, China DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 - SN: 5dl82 Date:12(cid:99)06(cid:99)2018 Communication System: UID 0, CW; Frequency: 1900 MHz; Duty Cycle: 1:1 Medium parameters used:f = 1900 MHz; c = 1.441 S/m; sr = 39.59; p = 1000 kg/m3 Phantom section: Center Section DASY5 Configuration:
@ Probe: EX3DV4 - SN7514; ConvF(7.73,7.73,7.73) @ 1900 MHz; Calibrated:
8/27/2018
@ Sensor-Surface:1.4mm (Mechanical Surface Detection)
@ Electronics: DAE4 Snl555; Calibrated: 8/20/2018
@ Phantom: MFP_V5.1C ; Type: QD 000 P51CA; Serial:1062
@ Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12
(7450) System Performance Check/Zoom Scan (7x7x7)(7x7x7)/Cube 0: Measurement grid dx=5mm, dy=5mm, dz=5mm Reference Value = 95.91 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 19.3 W/kg SAR(1 g) = 10.1 W/kg; SAR(lo g) = 5.25 W/kg Maximum value of SAR (measured) = 15.8 W/kg dB 3.49
(cid:826)6.98
-10.48
-13.97
-17.46 0 dB = 15.8 W/kg = 11.99 dBW/kg Certificate No: Zl 8-60536 Page 5 of 8 In s laborationwith
(cid:1937)(cid:1071)Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China
(cid:4162)"
Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn Impedance Measurement Plotfor Head TSL Ref O.OOQd [F(cid:1506)]
(cid:99)" (cid:4162)\ (cid:99) (cid:99)(cid:99)(cid:99) (cid:99)(cid:4162)(cid:99)(cid:99)i-(cid:4162)
(cid:3274)
(cid:1352) Certificate No: Zl8-60536 Page 6 of 8 In Collaboration with s o e a CALIBRATION LABORATOR^
Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn DASY5 Validation Reportfor Body TSL Date: u.u:
Test Laboratory: CTTL, Beijing, China DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 - SN: 5dl82 Date: l2(cid:99)05(cid:99)2018 Communication System: UID 0, CW; Frequency: 1900 MHz; Duty Cycle: 1:1 Medium parameters used:f = 1900 MHz; a = 1.564 S/m; 8r = 51.82; p = 1000 kg/m3 Phantom section: Right Section DASY5 Configuration:
. Probe: EX3DV4 - SN7514; ConvF(7.53, 7.53, 7.53) @ 1900 MHz; Calibrated 8/27/2018
@ Sensor-Surface: 1.4mm (Mechanical Surface Detection)
@ Electronics: DAE4Snl555; Calibrated: 8/20/2018
@ Phantom: MFP_V5.1C ; Type: QD 000 P51CA; Serial: 1062
@ Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12
(7450) System Performance Check/Zoom Scan (7x7x7)(7x7x7)/Cube 0: Measurement grid dx=5mm, dy=5mm, dz=5mm Reference Value = 84.07 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated)^18.9 W/kg SAR(1 g) = 10.2 W/kg; SAR(lo g) = 5.31 W/kg Maximum value of SAR (measured) =15.7 W/kg dB 0
-3.46
-6.9z
-10.37
-13.83
-17.29 0 dB = 15.7 W/kg = 11.96 dBW/kg Certificate No: Z18-60536 Page 7 of 8
[n Collaboration with
^^pP^*"^@ In Col^aboration with i f f f s p e a c
'^^^^^^^ CALIBRATION LABORATOR^
(cid:829) (cid:959) Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn Impedance Measurement Plotfor Body TSL TPi'sii Log Mag lO.OOdB/ Ref O.ooodB [fi]
5OlO I >1 1.900,0000 GHZ 423.955 dB|
20.00 1 ' - !
0.000^ ! ! -I
-20.00 ! j- ^^^^p^-~^
nraa sn smith (R+jx) scale l.ooou [fi Del]
>1 1.9000000 GHZ 48.926 C3 6.19
(cid:4162)
(cid:2808)
(cid:840)
(cid:99) m. Certificate No: Zl 8-60536 Page 8 of 8
(cid:4567)(cid:1789)(cid:871)(cid:3258)
(cid:4162)""bration with E-mail: cttl@chinattl.com http://www.chinattl.cn (cid:2204)(cid:848)
(cid:4162)(cid:4162) Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 CALIBRATION LABORATORY Client Sporton Certificate No: Z19-60134
(cid:4559)(cid:1875)(cid:3242)(cid:2390)
(cid:1875)(cid:2109)(cid:1978)(cid:3242)
(cid:4517)(cid:4633) CALIBRATION CNAS L0570
(cid:1934)(cid:2653)(cid:3760)(cid:3222)"(cid:3274)"(cid:815) Object D2450V2 - SN: 924 Calibration Procedure(s) FF-Z11-003-01 Calibration Procedures for dipolevalidation kits Calibration date April15, 2019 This calibration Certificate documents the traceability to national standards, which realize the physical units of measurements(SI). The measurements and the uncertainties with confidence probability are given on the following pages and are part ofthe certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature(22 3)c and humidity<70%. Calibration Equipment used (M&TE criticalfor calibration) Power Meter NRP2 Power sensor NRP8S Reference Probe EX3DV4 DAE4 ID#
106277 104291 SN 3617 SN 1331 Cal Date(Calibrated by, Certificate No.) 20-Aug-18 (CTTL, No.J18X06862) 20-Aug-18 (CTTL, No.J18X06862) 31-Jan-19(SPEAG,No.EX3-3617_Jan19) 06-Feb-19(SPEAG,No.DAE4-1331_Feb19) Scheduled Calibration Aug-19 Aug-19 Jan-20 Feb-20 Secondary Standards Signal Generator E4438C NetworkAnalyzer E5071C MY49071430 MY46110673 Cal Date(Calibrated by, Certificate No.) 23-Jan-19 (CTTL, No.J19X00336) 24-Jan-19 (CTTL, No.J19X00547) Scheduled Calibration Jan-20 Jan-20 Calibrated by Reviewed by Name Zhao Jing Lin Hao Function SAR Test Engineer SAR Test Engineer Approved by Qi Dianyuan SAR Project Leader This calibration certificate shall not be reproduced exceptin full without written approval ofthe laboratory Issued: April 20, 2019 Certificate No: Z19-60134 Page 1 of 8
(cid:3300)
(cid:3550)tion with In Cdiab S J2 CALIBRAT^0(cid:1316)(cid:3151)(cid:4560)(cid:1307)(cid:829)(cid:4333)(cid:1593)(cid:3224)(cid:1593)(cid:3193)(cid:5373) e ^
Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn Glossary:
TSL ConvF N/A tissue simulating liquid sensitivity in TSL / NORMx,y,z not applicable or not measured Calibration is Performed According to the Following Standards:
a)IEEE Std 1528-2013, "IEEE Recommended Practice for Determining the Peak Spatial-Averaged Specific Absorption Rate (SAR)in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b)IEC 62209-1, "Measurement procedure for assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices- Part1: Device used nextto the ear(Frequency range of 300MHz to 6GHz)", July 2016 c)IEC 62209-2, "Procedure to measure the Specific Absorption Rate (SAR) For wireless communication devices used in close proximity to the human body (frequency range of 30MHz to 6GHz)", March 2010 d) KDB865664, SAR Measurement Requirements for100 MHz to 6 GHz Additional Documentation:
e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters:
@ Measurement Conditions: Further details are available from the Validation Report atthe end ofthe certificate. Allfigures stated in the certificate are valid atthe frequency indicated.
@ Antenna Parameters with TSL: The dipole is mounted with the spacerto position its feed point exactly below the center marking ofthe flat phantom section, with the arms oriented parallelto the body axis.
@ Feed PointImpedance and Return Loss: These parameters are measured with the dipole positioned underthe liquid filled phantom. The impedance stated is transformed from the measurement atthe SMA connectorto the feed point. The Return Loss ensures low reflected power. No uncertainty required.
@ Electrical Delay: One-way delay between the SMA connector and the antenna feed point. No uncertainty required.
@ SAR measured: SAR measured atthe stated antenna input power.
@ SAR normalized: SAR as measured, normalized to an input power of1 W atthe antenna connector.
@ SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of Measurement multiplied by the coverage factor k=2, which for a normal distribution Corresponds to a coverage probability of approximately 95%. Certificate No: Z19-60134 Page 2 of 8 In Col^aboration with s d e a a CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn Measurement Conditions DASY system configuration, as far as not given on page 1 DASY Version DASY52 Extrapolation Advanced Extrapolation Phantom TripeFat Phantom 5.1C Distance Dipole Center- TSL lo mm with Spacer 52.lo.2.1495 Zoom Scan Resolution dx, dy, dz = 5 mm Frequency 2450 MHz 1 MHz Head TSL parameters The following parameters and calculations were applied Nominal Head TSL parameters 22.0 C 39.2 1.80 mho/m Measured Head TSL parameters (22.0 0.2) C 40.4 6 % 1.85 mho/m 6 %
Temperature Permittivity Conductivity Head TSL temperature change during test (cid:1982) 0C (cid:845)(cid:845)(cid:845)(cid:845) SAR result with Head TSL SAR averaged over1 cm3 (1 g) of Head TSL Condition SAR measured 250 mW input power 13.1 W/kg SAR for nominal Head TSL parameters normalized to 1W 52.1 W/kg 18.8 % (k=2) SAR averaged over10 cm1 (lo g) of Head TSL Condition SAR measured 250 mW input power 5.99 W/kg SAR for nominal Head TSL parameters normalized to 1W 23.9 W/kg 18.7 % (k=2) Body TSL parameters The following parameters and calculations were applied Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 C 52.7 1.95 mho/m Measured Body TSL parameters (22.0 0.2) C 54.3 6 % 2.01 mho/m 6 %
Body TSL temperature change during test (cid:4228) 0C (cid:845)(cid:845)(cid:845)(cid:845) (cid:845)(cid:845)(cid:845)(cid:845) SAR result with Body TSL SAR averaged over1 cm3 (1 g) of Body TSL Condition SAR measured 250 mW input power 12.6 W/kg SAR for nominal Body TSL parameters normalized to 1W 50.1 W/kg 18.8% (k=2) SAR averaged over10 cm3 (lo g) of Body TSL Condition SAR measured 250 mW input power 5.83 W/kg SAR for nominal Body TSL parameters norma zed to 1W 23.3 W/kg 18.7 % (k=2) Certificate No: Z19-60134 Page 3 of 8 Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn Appendix (Additional assessments outside the scope of CNAS L0570) Antenna Parameters with Head TSL Impedance,transformed to feed point 51.9Q+2.68JQ Return Loss - 29.9dB Antenna Parameters with Body TSL Impedance,transformed to feed point 48.8Q+4.17JQ Return Loss - 27.2dB General Antenna Parameters and Design Electrical Delay (one direction) 1.019ns Afterlong term use with 100W radiated power, only a slight warming ofthe dipole nearthe feedpoint can be measured The dipole is made of standard semirigid coaxial cable. The center conductor ofthe feeding ine is directly connected to the second arm ofthe dipoe. The antenna is therefore short-circuited for DC-signas. On some ofthe dipoles, smal end caps are added to the dipole arms in orderto improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipoe ength is stil according to the Standard. No excessive force must be applied to the dipole arms, because they might bend orthe soldered connections nearthe feedpoint may be damaged II Additional EUT Data Manufactured by SPEAG Certificate No: Z19-60134 Page 4 of 8 In Collaboration with s o e a RATORY Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn DASY5 Validation Reportfor Head TSL Date: U4. Test Laboratory: CTTL, Beijing, China DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 - SN: 924 Date: 04(cid:99)l5(cid:99)2019 Communication System: UID 0, CW; Frequency: 2450 MHz; Duty Cycle: 1:1 Medium parameters used:f = 2450 MHz; a = 1.85 S/m; er = 40.35; p = 1000 kg/m3 Phantom section: Right Section DASY5 Configuration:
. Probe: EX3DV4 - SN3617; ConvF(7.62, 7.62, 7.62) @ 2450 MHz; Calibrated 1/31/2019
@ Sensor-Surface: 1.4mm (Mechanical Surface Detection)
@ Electronics: DAE4 Snl 331; Calibrated: 2/6/2019
@ Phantom: MFP_V5.1C ; Type: QD 000 P51CA; Serial: 1062
@ Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12
(7450) Dipole Calibration/Zoom Scan (7x7x7)(7x7x7)/Cube 0: Measurement grid: dx=5 dy=5mm, dz=5mm Reference Value = 86.73 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 28.0 W/kg SAR(1 g) = 13.1 W/kg; SAR(lo g) = 5.99 W/kg Maximum value of SAR (measured) = 22.2 W/kg
(cid:2808) dB 0
-(cid:833).53
(cid:845)9(cid:99)05
-13.58
-18.10
-22.63 0 dB = 22.2 W/kg = 13.46 dBW/kg Certificate No: Z19-60134 Page 5 of 8 In Collaboration with CALIBRATION LABORATOR^
Haidian District, Beijing,100191, China Fax: +86-lo-62304633-2504 http://www.chinattl.cn
(cid:99)(cid:4162)Add: No.51 Xueyuan 1 Tel: +86-lo-62304633 E-mail: cttl@chinattl.c R^oad,
-2079
;om Impedance Measurement Plotfor Head TSL
(cid:865)rl si(cid:1789) Log Mag lO.OOd (cid:828) Ref O.OOOdB [Fl]
50(cid:273)00 @T 2.4500000 GHz -(cid:831)9.890 dB 40.00 30.00 20.00 10.00 0.000^
-10.00
(cid:826)20.00
(cid:826)30.00
(cid:826)40.00
@50(cid:99)00
@(cid:3650) sl smith CR+jx) scale (cid:830).000U [Fl Del]
(cid:1150)(cid:1789) 2.4 500000 GHZ 51.860 (cid:829) 2.6811
(cid:573)
(cid:828)
(cid:2963)
(cid:865)(cid:864)tar (cid:831).25(cid:825)GHz(cid:3274)(cid:1402)(cid:3542)"(cid:3274)(cid:1476)(cid:3492)(cid:1610)(cid:815)(cid:1058)"(cid:1610)(cid:1610)(cid:3274) (cid:854)(cid:847)(cid:1898)IOOHz (cid:2056)(cid:3274)(cid:3274)(cid:3274)(cid:3274)1(cid:4443)(cid:1610)(cid:4443)(cid:1238)(cid:3274)(cid:1610)(cid:3274)(cid:1541)(cid:3274)(cid:1610)(cid:3285)(cid:1901)(cid:3274)(cid:1610)(cid:1490)(cid:4162)(cid:3258) Certificate No: Z19-60134 Page 6 of 8 In Collaboration with
(cid:3288)(cid:871)(cid:3258)(cid:3258) s o e a CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn DASY5 Validation Reportfor Body TSL Date:in.i Test Laboratory: CTTL, Beijing, China DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 - SN: 924 Date: 04(cid:99)15(cid:99)20l9 Communication System: UID 0, CW; Frequency: 2450 MHz; Duty Cycle:1:1 Medium parameters used:f = 2450 MHz; a = 2.005 S/m; er = 54.25; p = 1000 kg/m3 Phantom section: Center Section DASY5 Configuration:
. Probe: EX3DV4 - SN3617; ConvF(7.79, 7.79, 7.79) (cid:862)2450 MHz; Calibrated 1/31/2019
(cid:99) Sensor-Surface:1.4mm (Mechanical Surface Detection)
. Electronics: DAE4 Snl331; Calibrated: 2/6/2019
. Phantom: MFP_V5.1C ; Type: QD 000 P51CA; Serial: 1062
. Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12
(7450) Dipole Calibration/Zoom Scan (7x7x7)(7x7x7)/Cube 0: Measurement grid: dx=5 dy=5mm, dz=5mm Reference Value = 95.46 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 26.3 W/kg SAR(1 g) = 12.6 W/kg; SAR(lo g) = 5.83 W/kg Maximum value of SAR (measured) = 20.9 W/kg
(cid:2808) So
-4.38
-8.77
-13.15
-17.54
(cid:845)2l(cid:99)92 0 dB = 20.9 W/kg = 13.20 dBW/kg Certificate No: Z19-60134 Page 7 of 8
(cid:4567)(cid:871)(cid:3258)(cid:857) s (cid:3151) e a (cid:2808) (cid:826)
^^^K^m^0^ CALIBRATION LABORATORY
(cid:4162) Collaboration with Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2079 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn Impedance Measurement Plotfor Body TSL Tr(cid:1304) s(cid:2808) (cid:857)og Mag lO.OOd(cid:3400) R(cid:882)f O.OOOdB [Fl]
>1 2.4 500000 GHZ -27." 168 dB
(cid:4162) (cid:4162)(cid:857)-(cid:4162)(cid:4162)(cid:3828)(cid:1228)(cid:4162)--(cid:826)(cid:4162)(cid:4162)(cid:4162) (cid:4162)
(cid:856)
(cid:891) 50(cid:99)00 40.00 30.00 20.00
(cid:5373)0.00 0.000(cid:273)
-(cid:2408)0.00
-20.00
(cid:832)0.00
-40.00
-(cid:2408)(cid:99)o0
(cid:1150)(cid:3364) sl (cid:896)mith (cid:821)R+jx) scale (cid:830).000U (cid:872)F(cid:1506) Del]
(cid:3666) 2.4 500000 GHZ 48.820 (cid:829) 4(cid:1304)6
<
1 (cid:864)tart (cid:831).25 ;(cid:1742)(cid:4432)(cid:3222)"(cid:3274)(cid:815)(cid:815)(cid:815):";(cid:3977);(cid:98)(cid:3274)(cid:3274)(cid:815)(cid:815)(cid:3676)(cid:3274);(cid:1610)(cid:1610)(cid:1565)(cid:1146)00 (cid:1610)(cid:1648)(cid:1610)(cid:1610)(cid:4575)(cid:1093)(cid:1112)(cid:1610)(cid:1610)(cid:3274)(cid:815)""(cid:1058)"(cid:1610)(cid:1610)(cid:1610)(cid:3274) (cid:864)top (cid:865)
(cid:845)(cid:4162) (cid:4162)(cid:4162)(cid:3887)(cid:4162) Certificate No: Z19-60134 Page 8 of 8 This calibration certificate shall not be reproduced exceptin full without written approval ofthe laboratory.
(cid:2118)
(cid:902)
(cid:902)
(cid:815)(cid:3087) E-mail: cttl@chinattl.com http://www.chinattl.cn (cid:2204)(cid:848) Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2512 Fax: +86-lo-62304633-2504
(cid:815)
(cid:7716)(cid:7716)(cid:815)
(cid:4162)
(cid:2946)
(cid:573) Client Sporton Certificate No: Z18-60259 m^
CALIBRATION CNAS L0570 Object D5GHzV2-SN:1167 Calibration Procedure(s) FF-Z11-003-01 Calibration Procedures for dipole validation kits Calibration date August 03, 2018 This calibration Certificate documents the traceability to national standards, which realize the physical units of measurements(SI). The measurements and the uncertainties with confidence probability are given on the following pages and are part ofthe certificate. All calibrations have been conducted in the closed laboratory facility, environment temperature(22 3)C and humidity<70%. Calibration Equipment used (M&TE criticalfor calibration) Primary Standards Power Meter NRP2 Power sensor NRP-Z91 ReferenceProbe EX3DV4 DAE4 ID#
102083 100542 SN 7464 SN 1524 Cal Date(Calibrated by, Certificate No.) 01-Nov-17 (CTTL, NO.J17X08756) 01-Nov-17 (CTTL, NO.J17X08756) 12-Sep-17(SPEAG,No.EX3-7464_Sep17) 13-Sep-17(SPEAG,No.DAE4-1524_Sep17) Scheduled Calibration Oct-18 Oct-18 Sep-18 Sep-18 Secondary Standards Signal Generator E4438C NetworkAnalyzerE5071 C MY49071430 MY46110673 Cal Date(Calibrated by, Certificate No.) 23-Jan-18 (CTTL, No.J18X00560) 24-Jan-18 (CTTL, No.J18X00561) Scheduled Calibration Jan-19 Jan-19 Calibrated by: ZhaoJing AR Test Engineer \^|ft ^
Calibrated by Name Function Signature Name Zhao Jing AR Test Engineer Function Reviewed by: LinHao SAR Test Engineer ^W^-^7 \:
Reviewed by SAR Test Engineer Lin Hao Approved by: Qi Dianyuan SAR Project Leader ^S^^^@^-'~
Approved by SAR Project Leader Qi Dianyuan Issued: August 6, 2018 " -
Certificate No: Zl 8-60259 Pagel of14
(cid:4567)(cid:1789)(cid:2744)(cid:3258) s e a
(cid:4162)In Collaboration with
(cid:4162)(cid:4162)AUBAON (cid:857)ABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2512 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn tissue simulating liquid sensitivity in TSL / NORMx,y,z not applicable or not measured Glossary:
TSL ConvF N/A Calibration is Performed According to the Following Standards:
a)IEEE Std 1528-2013, "IEEE Recommended Practice for Determining the Peak Spatial-Averaged Specific Absorption Rate (SAR)in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b)IEC 62209-1, "Measurement procedure for assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices- Part1: Device used nextto the ear(Frequency range of 300MHz to 6GHz)", July 2016 c)IEC 62209-2, "Procedure to measure the Specific Absorption Rate (SAR) For wireless communication devices used in close proximity to the human body (frequency range of 30MHz to 6GHz)", March 2010 d)KDB865664, SAR Measurement Requirements for100 MHz to 6 GHz Additional Documentation:
e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters:
@ Measurement Conditions: Further details are available from the Validation Report atthe end ofthe certificate. Allfigures stated in the certificate are valid atthe frequency indicated.
@ Antenna Parameters with TSL: The dipole is mounted with the spacerto position its feed point exactly below the center marking ofthe flat phantom section, with the arms oriented parallelto the body axis.
@ Feed PointImpedance and Return Loss: These parameters are measured with the dipole positioned underthe liquid filled phantom. The impedance stated is transformed from the measurement atthe SMA connectorto the feed point. The Return Loss ensures low reflected power. No uncertainty required.
@ Electrical Delay: One-way delay between the SMA connector and the antenna feed point. No uncertainty required.
@ SAR measured: SAR measured atthe stated antenna input power.
@ SAR normalized: SAR as measured, normalized to an input power of1 W atthe antenna connector.
@ SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of Measurement multiplied by the coverage factor k=2, which for a normal distribution Corresponds to a coverage probability of approximately 95%. Certificate No: Zl 8-60259 Page 2 of14
(cid:4567)(cid:1789)(cid:2744)(cid:1431) Coliabora(cid:4162)Collaboration with
(cid:4162)(cid:4162) Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2512 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn CAJJ BRAT1ON LABORATORY Measurement Conditions DASY system configuration, as far as not given on page 1 DASY Version DASY52 Extrapolation Advanced Extrapolation Phantom Triple Flat Phantom 5.1 C Distance Dipole Center- TSL lo mm with Spacer Zoom Scan Resolution dx, dy = 4 mm, dz = 1.4 mm Graded Ratio = 1.4 (Z direction) 52.lo.1.1476 Frequency 5250 MHz 1 MHz 5600 MHz 1 MHz 5750 MHz 1 MHz Head TSL parameters at 5250 MHz The following parameters and calculations were applied Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 C 35.9 4.71 mho/m Measured Head TSL parameters (22.0 0.2) C 35.9 6 % 4.82 mho/m 6 %
Head TSL temperature change during test (cid:4228) 0c (cid:845)(cid:845)(cid:845)(cid:845) (cid:845)(cid:845)(cid:845)(cid:845) SAR result with Head TSL at 5250 MHz SAR averaged over1 cm3 (1 g) of Head TSL Condition SAR measured 100 mW input power 7.69 mW / g SAR for nominal Head TSL parameters normalized to 1W 77.0 mW/g 24.4 % (k=2) SAR averaged over10 cm^ (log) of HeadTSL Condition SAR measured 100 mW input power 2.20 mW / g SAR for nominal Head TSL parameters normalized to 1W 22.0 mW /g 24.2 % (k=2) Certificate No: Zl8-60259 Page 3 of14 flpPl^^^k,^ In Collaboration with Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2512 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn Head TSL arameters at 5600 MHz were applied Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 C 35.5 5.07 mho/m Measured Head TSL parameters (22.0 0.2) C 35.1 6% 5.18mho/m 6%
Head TSL temperature change during test
<1.0C (cid:845)(cid:845)(cid:845)(cid:845) (cid:845)(cid:845)(cid:845)(cid:845) SAR result with Head TSL at 5600 MHz SAR averaged over1 cm3 (1 g) of Head TSL Condition SAR measured SAR for nominal Head TSL parameters 100 mW input power 8.09 mW / g normalized to 1W 80.8 mW /g 24.4 % (k=2) SAR averaged over10 cm3 (lo g) of Head TSL Condition SAR measured SAR for nominal Head TSL parameters 100 mW input power 2.32 mW / g normalized to 1W 23.2 mW /g 24.2 % (k=2) Head TSL parameters at 5750 MHz The following parameters and calculations were applied Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 C 35.4 5.22 mho/m Measured Head TSL parameters (22.0 0.2) C 34.9 6 % 5.37 mho/m 6 %
Head TSL temperature change during test
(cid:4228) 0C (cid:845)(cid:845)(cid:845)(cid:845) (cid:845)(cid:845)(cid:845)(cid:845) SAR result with Head TSL at 5750 MHz SAR averaged over1 cm3 (1 g) of Head TSL Condition SAR measured SAR for nominal Head TSL parameters 100 mW input power 7.70 mW / g normalized to 1W 76.9 mW /g 24.4 % (k=2) SAR averaged over10 cm3 (lo g) of Head TSL Condition SAR measured SAR for nominal Head TSL parameters 100 mW input power 2.17 mW/g normalized to 1W 21.6 mW/g 24.2 %(k=2) Certificate No: Zl 8-60259 Page 4 of14
(cid:4162)(cid:871)(cid:4579)(cid:871) s D (cid:98) (cid:2095) (cid:3151)
(cid:4162)Collaboration with Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2512 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn Body TSL parameters at 5250 MHz The following parameters and calculations were applied Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 C 48.9 5.36 mho/m Measured Body TSL parameters (22.0 0.2) C 48.4 6 % 5.32 mho/m 6 %
Body TSL temperature change during test (cid:4228) 0 (cid:98)C (cid:845)(cid:845)(cid:845)(cid:845) (cid:845)(cid:845)(cid:845)(cid:845) SAR result with Body TSL at 5250 MHz SAR averaged over1 cm3 (1 g) of Body TSL Condition SAR measured 100 mW input power 7.46 mW / g SAR for nominal Body TSL parameters normalized to 1W 74.4 mW /g 24.4 % (k=2) SAR averaged over10 cmi (lo g) of Body TSL Condition SAR measured 100 mW input power 2.10 mW/g SAR for nominal Body TSL parameters normalized to 1W 20.9 mW /g 24.2 % (k=2) Body TSL parameters at 5600 MHz The following parameters and calculations were applied Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 C 48.5 5.77 mho/m Measured Body TSL parameters (22.0 0.2) C 47.7 6 % 5.79 mho/m 6 %
Body TSL temperature change during test (cid:2008) 0 (cid:98)c (cid:845)(cid:845)(cid:845)(cid:845) (cid:845)(cid:845)(cid:845)(cid:845) SAR result with Body TSL at 5600 MHz SAR averaged over1 cm3 (1 g) of Body TSL Condition SAR measured 100 mW input power 7.73 mW/g SAR for nominal Body TSL parameters normalized to 1W 77.1 mW /g 24.4 % (k=2) SAR averaged over10 cm3 (lo g) of Body TSL Condition SAR measured 100 mW input power 2.16mW/g SAR for nominal Body TSL parameters normalized to 1W 21.5 mW/g 24.2 %(k=2) Certificate No: Zl 8-60259 Page 5 of14 In Collaboration with s CALIBRATION LABORATC CALIBRATION LABORATO mw jad, Haidian District, Beijing,10019 d, Haidian District, Beijing, 1001^
12 Fax: +86-lo-62304633-2 1512 Fax: +86-lo-62304633-25 m http://www.chinattl.cn http://www.chinattl.cn
)1, China 504
(cid:4162)(cid:4162)(cid:3288)(cid:871)(cid:3258)(cid:871)
(cid:4162)(cid:4162) Add: No.51 Xueyuan Ro Tel: +86-lo-62304633-2:
E-mail: cttl@chinattl.cor Body TSL parameters at 5750 MHz The following parameters and calculations were applied Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 C 48.3 5.94 mho/m Measured Body TSL parameters (22.0 0.2) C 48.5 6 % 5.93 mho/m 6 %
Body TSL temperature change during test
<1.0C (cid:845)(cid:845)(cid:845)(cid:845) (cid:845)(cid:845)(cid:845)(cid:845) SAR result with Body TSL at 5750 MHz SAR averaged over1 cm^ (1 g) of Body TSL Condition SAR measured 100 mW input power 7.43 mW / g SAR for nominal Body TSL parameters normalized to 1W 74.3 mW /g 24.4 % (k=2) SAR averaged over10 cm3 (lo g) of Body TSL Condition SAR measured 100 mW input power 2.08 mW/g SAR for nominal Body TSL parameters normalized to 1W 20.8 mW /g 24.2 % (k=2) Certificate No: Zl8-60259 Page 6 of14 In Collaboration with
(cid:896) (cid:1733) CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2512 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn
(cid:4162)
(cid:4162)(cid:3266) Appendix (Additional assessments outside the scope of CNAS L0570) Antenna Parameters with Head TSL at 5250 MHz Impedance,transformed to feed point 50.3Q - 9.42JQ Return Loss - 20.6dB Antenna Parameters with Head TSL at 5600 MHz Impedance,transformed to feed point 58.1Q-7.15jQ Return Loss -20.0dB Antenna Parameters with Head TSL at 5750 MHz Impedance,transformed to feed point 53.5Q - 7.66JQ Return Loss -21.8dB Antenna Parameters with Body TSL at 5250 MHz Impedance,transformed to feed point 49.5Q - 7.40JQ Return Loss - 22.6dB Antenna Parameters with Body TSL at 5600 MHz Impedance,transformed to feed point 58.0Q - 6.37JQ Return Loss - 20.5dB Antenna Parameters with Body TSL at 5750 MHz Impedance,transformed to feed point 54.5Q - 7.07JQ Return Loss -21.9dB Certificate No: Zl8-60259 Page 7 of14 Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2512 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn General Antenna Parameters and Design Electrical Delay (one direction) 1.065 nS Afterlong term use with 100W radiated power, only a slight warming ofthe dipole nearthe feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor ofthe feeding line is directly connected to the second arm ofthe dipole. The antenna is therefore short-circuited for DC-signals. On some ofthe dipoles, small end caps are added to the dipole arms in orderto improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend orthe soldered connections nearthe feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Certificate No: Zl8-60259 Page 8 of14
(cid:896) (cid:829) (cid:2095)(cid:2634)Collaboration with (cid:4162) Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2512 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn CALIBRATION LABORATORY DASY5 Validation Reportfor Head TSL Date: 07.27.2018 Test Laboratory: CTTL, Beijing, China DUT: Dipole 5GHz; Type: D5GHzV2; Serial: D5GHzV2 - SN:1167 Communication System: CW; Frequency: 5250 MHz, Frequency: 5600 MHz, Frequency: 5750 MHz, Medium parameters used: f = 5250 MHz; a = 4.822 S/m; er = 35.92; p = 1000 kg/m3, Medium parameters used: f = 5600 MHz; a = 5.184 S/m; er = 35(cid:99)(cid:1506)4; p =
1000 kg/m3, Medium parameters used:f = 5750 MHz; a = 5.365 S/m; er = 34.88; p
= 1000kg/m3, Phantom section: Center Section DASY5 Configuration:
@ Probe: EX3DV4 - SN7464; ConvF(5.68, 5.68, 5.68) @ 5250 MHz; Calibrated:
9/12/2017, ConvF(4.98, 4.98, 4.98) @ 5600 MHz; Calibrated: 9/12/2017, ConvF(5.04, 5.04, 5.04) @ 5750 MHz; Calibrated: 9/12/2017,
@ Sensor-Surface: 1.4mm (Mechanical Surface Detection)
@ Electronics: DAE4 Sn1524; Calibrated: 9/13/2017
@ Phantom: MFP_V5.1C ; Type: QD 000 P51CA; Serial: 1062
@ Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11
(7439) Dipole Calibration /Pin=loomW, d=10mm,f=5250 MHz/Zoom Scan, dist=(cid:5373)(cid:99)4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=(cid:1506)(cid:99)4mm Reference Value = 65.09 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 32.4 W/kg SAR(1 g) = 7.69 W/kg; SAR(lo g) = 2.2 W/kg Maximum value of SAR (measured) = 18.0 W/kg Dipole Calibration /Pin=loomW, d=10mm,f=5600 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 63.53 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 36.2 W/kg SAR(1 g) = 8.09 W/kg; SAR(lo g) = 2.32 W/kg Maximum value of SAR (measured) = 19.7 W/kg Dipole Calibration /Pin=loomW, d=10mm,f=5750 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 63.79 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 36.2 W/kg SAR(1 g) = 7.7 W/kg; SAR(lo g) = 2.17 W/kg Maximum value of SAR (measured) = 19.0 W/kg Certificate No: Zl8-60259 Page 9 of14 In Collaboration with
(cid:3828)(cid:871)(cid:3258)(cid:1431) " e a Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2512 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn dB 0
-10.00
-20.00
-30.00
-(cid:833)0(cid:99)00
-50.00 0 dB (cid:3511) (cid:1506)9.0 W/kg @l2.79 dBW@kg Certificate No: Zl8-60259 Page lo of14 Collaboration with
^^^pP^^^@ In Collaboration with In fifyrrirfy s d & 0 ^
5
^^^^^^^^ CALIBRATION LABORATORY o e Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2512 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn Impedance Measurement Plotfor Head TSL Trl Sll Log Mag lO.OOdB/ Ref O.OOOdB [Fl]
5O' r>l 5.2 5OOOOO GHZ -20.583 dB
(cid:1003) 5 GH2 (cid:826) dB 2 5.6000000 GHZ (cid:826)20.003 dB 40.00 3 5.750OOOO GHZ (cid:826)2(cid:1304).823 dB 30.00 20(cid:99)o0
(cid:1789)0.00 0.000^
(cid:4162)(cid:1789)(cid:829).00
(cid:4162)(cid:1597)0(cid:99)00
(cid:826)30.00
(cid:826)40.00
(cid:826)50.00 (cid:99) "(cid:4162)
@(cid:3650) sl Smith (R+jX) Scale l.OOOU [Fl Del]
(cid:2313) 5.25OOOOO GHZ 50.314 n (cid:826)9.41 2 5.6000000 GHZ 58.136 n (cid:3070)(cid:99)(cid:3755)5 F 3 5.75OOOOO GHZ 53.485 (cid:862) (cid:836).65 F
(cid:1733)
(cid:982) (cid:846) (cid:4106) Certificate No: Zl 8-60259 Page 11 of14
(cid:4567)(cid:1789)(cid:3258)(cid:871) s o e a(cid:4162)Collaboration with
(cid:4162) Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2512 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn CALIBRATION LABORATORY DASY5 Validation Reportfor Body TSL Date: 08.02.2018 Test Laboratory: CTTL, Beijing, China DUT: Dipole 5GHz; Type: D5GHzV2; Serial: D5GHzV2 - SN: 1167 Communication System: CW; Frequency: 5250 MHz, Frequency: 5600 MHz, Frequency: 5750 MHz, Medium parameters used: f = 5250 MHz; a = 5.316 S/m; er = 48.42; p = 1000 kg/m3, Medium parameters used: f = 5600 MHz; a = 5.789 S/m; ex = 47.7; p =
1000 kg/m3, Medium parameters used:f = 5750 MHz; a = 5.926 S/m; er = 48.45; p
= 1000kg/m3, Phantom section: Right Section DASY5 Configuration:
@ Probe: EX3DV4 - SN7464; ConvF(5.29, 5.29, 5.29) @ 5250 MHz; Calibrated:
9/12/2017, ConvF(4.5, 4.5, 4.5) @ 5600 MHz; Calibrated: 9/12/2017, ConvF(4.59, 4.59, 4.59) @ 5750 MHz; Calibrated: 9/12/2017,
@ Sensor-Surface: 1.4mm (Mechanical Surface Detection)
@ Electronics: DAE4 Sn1524; Calibrated: 9/13/2017
@ Phantom: MFP_V5.1C ; Type: QD 000 P51CA; Serial: 1062
@ Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11
(7439) Dipole Calibration /Pin=loomW, d=10mm,f=5250 MHz/Zoom Scan, dist=(cid:1506)(cid:99)4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 64.14 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 31.9 W/kg SAR(1 g) = 7.46 W/kg; SAR(lo g) = 2.1 W/kg Maximum value of SAR (measured) = 17.6 W/kg Dipole Calibration /Pin=loomW, d=10mm,f=5600 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 62.32 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 36.3 W/kg SAR(1 g) = 7.73 W/kg; SAR(lo g) = 2.16 W/kg Maximum value of SAR (measured) = 19.1 W/kg Dipole Calibration /Pin=loomW, d=10mm,f=5750 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 63.99 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 35.2 W/kg SAR(1 g) = 7.43 W/kg; SAR(lo g) = 2.08 W/kg Maximum value of SAR (measured) = 18.0 W/kg Certificate No: Zl8-60259 Page 12 of14
(cid:3108)(cid:3258)(cid:871)(cid:3258) " (cid:98) "
(cid:4162)Collaboration with
(cid:4162)(cid:4162)CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian DistrictBeijing,100191, China Tel (cid:824)86-lo-62304633-2512 (cid:851)ax: +86-lo-62304633-2504 E-mail c(cid:3650)(cid:862)china(cid:4228)l.com http://www.china(cid:1589)l.cn dB
(cid:836).48
(cid:2762) (cid:833).96
(cid:4162)2243
(cid:831)9.91
(cid:826)3(cid:2580)(cid:273)39 0 dB (cid:842) 18.0 W/kg (cid:842) 12.55 d BW@kg Certificate No: Zl8-60259 Page 13 of14
(cid:2317) Collaboration with
(cid:4609) e a
(cid:4162) Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2512 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn Impedance Measurement Plotfor Body TSL
(cid:3248)
(cid:4544)
(cid:3336) 0(cid:3248) 0(cid:3191) 0 0 0 O
(cid:829) o 0 0 0 o 0 O 0 0 0 0
(cid:834)
(cid:1249)
(cid:2946)
(cid:838) L T a
(cid:834)
(cid:99)
(cid:1597) 6
(cid:4287) 0(cid:838)
(cid:1789)
(cid:4525) 3
(cid:4162)
(cid:3699) o
(cid:1597) 0 4
(cid:99) 0 3
(cid:99)
(cid:2407) 0 0
(cid:3336) 0
(cid:1789) 0 0
(cid:2407) 0 3 0 4 0
(cid:834)
(cid:1672) R
(cid:2390)(cid:1150)
+
(cid:2407) G H z G H z H z
(cid:1789)
(cid:3698)
(cid:864) o 0 0 0
(cid:99) 0 0 0
(cid:860)
(cid:99) 0 O
(cid:99) o 0 0 0 0
(cid:99) 0 0
(cid:99) 0 O
(cid:99) 0 O
(cid:99)
(cid:829) 0
(cid:99) T S
(cid:1789)
(cid:834)
(cid:99) h 0 0
(cid:860)
(cid:1597)
(cid:3248) 0 0 0 m 0 0
(cid:829)
(cid:826) (cid:826) - (cid:826) (cid:826) X 4(cid:1597) O 0 0 0 O 0 3
(cid:834) o
(cid:834)
(cid:3181)
(cid:1597)
(cid:835)
(cid:2580)
(cid:1386)
(cid:1597)
(cid:852)
(cid:4598)
(cid:99)
(cid:99)
(cid:1597)
(cid:864)
(cid:99)
(cid:1506)[
/
G(cid:852) H H G H
(cid:2850)
(cid:2390)
(cid:3288)R 2 z z
(cid:848)
(cid:831)
(cid:1597)
(cid:831)
(cid:99)
(cid:1732)
@
@
@
(cid:1789)
(cid:829)
(cid:829) n 000 0
(cid:4525)
(cid:1504)
(cid:4227)
(cid:3288) 0 4
(cid:834)
(cid:1789) 3
(cid:838)
(cid:838)
(cid:1789)
(cid:99)
(cid:99)
(cid:99)
(cid:3336)
(cid:1796) O O U
(cid:1504) 3 9 3 7 0
(cid:835)
(cid:4287)
(cid:2580) 0
@
@
@
d
(cid:99)
[
7
(cid:831)
(cid:831)
(cid:3248)
(cid:994)
(cid:3248)
(cid:3248)
(cid:99)
(cid:1789)
(cid:3248) d d F
(cid:831) 0
(cid:1597) C(cid:860) C C
(cid:99)
(cid:99) 4 6
(cid:831) 4(cid:838) B
(cid:834)
(cid:833)
(cid:838)
(cid:834)
(cid:838)
(cid:1504)
(cid:833)
(cid:848)D
]
(cid:1597)
(cid:833)
(cid:833)
(cid:992)
(cid:3206)
]
0
(cid:838)
(cid:838)
(cid:1789) 8 3
(cid:831)
(cid:837)
(cid:1228) p p
(cid:99) F F
(cid:3310)
(cid:4656)
(cid:982) (cid:846) (cid:3289) (cid:4670) Certificate No: Zl 8-60259 Page 14 of14 Client : Sporton Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2512 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com Http://www.chinattl.en
(cid:2204) (cid:847)F (cid:848)ALIBRATION Certificate No: Z19-60029
(cid:1448)@(cid:1348)(cid:1914)(cid:1546)(cid:6344)'(cid:1461)(cid:4556)(cid:3285)(cid:3025)(cid:3285)(cid:4481)(cid:1112)(cid:4470)(cid:1887)(cid:3143)(cid:3908)(cid:2692)(cid:1294)(cid:1435)(cid:2797)(cid:1352)"(cid:4520)(cid:2992)(cid:4125)(cid:3222) @
Object DAE4-SN;715 Calibration Procedure(s) FF-Z11-002-01 Calibration Procedure for the Data Acquisition Electronics
(DAEx) Calibration date January 23, 2019 This calibration Certificate documents the traceability to national standards, which realize the physical units of measurements(SI). The measurements and the uncertainties with confidence probability are given on the following pages and are part ofthe certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature(22 3)c and humidity<70%. Calibration Equipment used (M&TE criticalfor calibration) Primary Standards ID# Cal Date(Calibrated by, Certificate No.) Scheduled Calibration Process Calibrator 753 | 1971018 20-Jun-18 (CTTL, No.J 18X05034) June-19 Calibrated by Reviewed by Name Function Signature Yu Zongying SAR Test Engineer Lin Hao SAR Test Engineer Approved by Qi Dianyuan SAR Project Leader This calibration certificate shall not be reproduced exceptin full without written approval ofthe laboratory. Issued: January 24, 2019 Certificate No: Z19-60029 Page 1 of 3 Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86-lo-62304633-2512 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com Http://www.chinattl.cn Glossary:
DAE Connector angle data acquisition electronics information used in DASY system to align probe sensor X to the robot coordinate system. Methods Applied and Interpretation of Parameters:
@ DC Voltage Measurement Calibration Factor assessed for use in DASY system by comparison with a calibrated instrumenttraceable to national standards. The figure given corresponds to the full scale range ofthe voltmeterin the respective range. Connector angle: The angle ofthe connectoris assessed measuring the angle mechanically by a tool inserted. Uncertainty is notrequired. The report provide only calibration results for DAE, it does not contain other performance testresults. Certificate No: Zl9-60029 Page 2 of3
(cid:4567)(cid:1789)(cid:3258)(cid:871)s p e - (cid:1831)
(cid:4162)In Collaboration with Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China Tel: +86-lo-62304633-2512 Fax: +86-lo-62304633-2504 E-mail: cttl@chinattl.com Http://www.chinattl.cn
'^^^^^0^ CAUBRAHQN LABORATORY 330.5 1 330.5 1 DC Voltage Measurement A/D - Converter Resolution nominal High Range: 1LSB= 6.1|xV, fullrange = -100...+300 mV Low Range: 1LSB= 61 nV , fullrange = -1 +3mV DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec Calibration Factors X Y z High Range 405.101 0.15% (k=2) 404.654 + 0.15% (k=2) 404.478 +0.15% (k=2) Low Range 3.99019 +0.7% (k=2) 3.97763 0.7% (k=2) 3.97614 0.7% (k=2) Connector Angle Connector Angle to be used in DASY system Certificate No: Z19-60029 Page 3 of3 Calibration Laboratory of Schmid & Partner Engineering AG Zeughausstrasse 43, 8004 Zurich, Switzerland (cid:2223) Accredited by the Swiss Accreditation Service (SAS) The Swiss Accreditation Service is one ofthe signatories to the EA Multilateral Agreementforthe recognition of calibration certificates Client Sporton
(cid:860) S c S Schweizerischer Kalibrierdienst Service suisse d'etalonnage Servizio svizzero ditaratura Swiss Calibration Service Accreditation No.: SCS 0108 Calibration procedure(s) Object (cid:1610) (cid:4556)(cid:4162)'
Calibration date (cid:4162) This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (SI). The measurements and the uncertainties with confidence probability are given on the following pages and are part ofthe certificate All calibrations have been conducted in the closed laboratory facility: environmenttemperature (22 + 3)C and humidity < 70%
Calibration Equipment used (M&TE criticalfor calibration) Cal Date (Certificate No.) Scheduled Calibration Primary Standards ID Power meter NRP SN:104778 04-Apr-18 (No. 217-02672/02673) Apr-19 Power sensor NRP-Z91 SN:103244 04-Apr-18 (No. 217-02672) Apr-19 Power sensor NRP-Z91 SN:103245 O4-Apr-18 (No. 217-02673) Apr-19 Reference 20 dB Attenuator SN: S5277 (20x) 04-Apr-18 (No, 217-02682) Apr-19 DAE4 SN: 660 19-Dec-18 (No. DAE4-660_Dec18) Dec-19 Reference Probe ES3DV2 SN:3013 31-Dec-18 (No. ES3-3013_Dec18) Dec-19 Secondary Standards ID Check Date (in house) Scheduled Check Power meter E4419B SN: GB41293874 06-Apr-16 (in house check Jun-18) In house check: Jun-20 Power sensor E4412A SN: MY41498087 O6-Apr-16 (in house check Jun-18) In house check: Jun-20 Power sensor E4412A SN: 000110210 O6-Apr-16 (in house check Jun-18) In house check: Jun-20 RF generator HP 8648C SN: US3642U01700 04-Aug-99 (in house check Jun-18) In house check (cid:2407)(cid:2407)n-20 Network Analyzer E8358A SN: US41080477 31-Mar-14 (in house check Oct-18) In house check: Oct-19 Calibrated by Approved by This calibration certificate shall not be reproduced exceptin full without written approval ofthe laboratory Certificate No: EX3-3819_Marl9 Page 1 of10 ignature Issued: March 2, 2019 Calibration Laboratory of Schmid & Partner Engineering AG Zeughausstrasse 43, 8004 Zurich, Switzerland (cid:2440)(cid:862) S c S Schweizerischer Kalibrierdienst Service suisse d'etalonnage Servizio svizzero ditaratura Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) The Swiss Accreditation Service is one ofthe signatories to the EA Multilateral Agreementforthe recognition of calibration certificates Accreditation No.: SCS 0108 Glossary:
TSL NORMx,y,z ConvF DCP CF A, B, C, D Polarization q>
Polarization 9 tissue simulating liquid sensitivity in free space sensitivity in TSL / NORMx.y.z diode compression point crestfactor(1/duty_cycle) ofthe RF signal modulation dependentlinearization parameters 9 rotation around probe axis
& rotation around an axis thatis in the plane normalto probe axis (at measurement center), i.e., a = 0 is normalto probe axis information used in DASY system to align probe sensor X to the robot coordinate system Connector Angle Calibration is Performed According to the Following Standards:
a) IEEE Std 1528-2013, "IEEE Recommended Practice for Determining the Peak Spatial-Averaged Specific Absorption Rate (SAR)in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 held and body-mounted devices used nextto the ear(frequency range of 300 MHz to 6 GHz)", July 2016 b) IEC 62209-1,", "Measurement procedure forthe assessment of Specific Absorption Rate (SAR)from hand
(cid:2381) c) IEC 62209-2, "Procedure to determine the Specific Absorption Rate (SAR)for wireless communication devices
(cid:3507) used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March 2010 d^ KDB 865664, "SAR Measurement Requirements for100 MHz to 6 GHz"
(cid:2993) Methods Applied and Interpretation of Parameters:
@ NORMx,y,z: Assessed for E-field polarization ^ = 0 (f < 900 MHz in TEM-cell;f > 1800 MHz: R22 waveguide). NORMx,y,z are only intermediate values,i.e.,the uncertainties of NORMx.y.z does not affectthe E2-field uncertainty inside TSL (see below ConvF).
@ NORM(f)x,y,z - NORMx,y,z * frequency_response (see Frequency Response Chart). This linearization is implemented in DASY4 software versions laterthan 4.2. The uncertainty ofthe frequency response is included in the stated uncertainty of ConvF.
@ DCPx,y,z: DCP are numericallinearization parameters assessed based on the data of power sweep with CW signal(no uncertainty required). DCP does not depend on frequency nor media.
@ PAR: PAR is the Peak to Average Ratio thatis not calibrated but determined based on the signal
@ Ax,y,z; Bx,y,z; Cx,y,z; Dx,y,z; VRx,y,z: A, B, C, D are numericallinearization parameters assessed based on characteristics the data of power sweep for specific modulation signal. The parameters do not depend on frequency nor media. VR is the maximum calibration range expressed in RMS voltage across the diode.
@ ConvF and Boundary Effect Parameters: Assessed in flat phantom using E-field (or Temperature Transfer Standard forf <, 800 MHz) and inside waveguide using analyticalfield distributions based on power measurements forf > 800 MHz. The same setups are used for assessment ofthe parameters applied for boundary compensation (alpha, depth) of which typical uncertainty values are given. These parameters are used in DASY4 software to improve probe accuracy close to the boundary. The sensitivity in TSL corresponds to NORMx,y,z * ConvF whereby the uncertainty corresponds to that given for ConvF. A frequency dependent ConvF is used in DASY version 4.4 and higher which allows extending the validity from 50 MHz to 100 MHz. "@ l!@*@" "^^ii-7Qri ncinn a flat nhantom Sphericalisotropy (3D deviation from isotropy):in a field oflow gradients realized using a flat phantom MHZ. exposed by a patch antenna. Sensor Offset The sensor offset corresponds to the offset of virtual measurement centerfrom the probe tip
(on probe axis). No tolerance required. Connector Angle: The angle is assessed using the information gained by determining the NORMx (no uncertainty required). Certificate No: EX3-3819_MaM9 Page 2 of10 dBVuV EX3DV4-SN:3819 March 1,2019 DASY/EASY - Parameters of Probe: EX3DV4 - SN:3819 Basic Calibration Parameters Sensor X SensorY Sensor Z Unc (k=2) Norm .V/(V/mf) 0.46 0.40 0.46 10.1 %
DCP mV) 101.7 100.6 (cid:1506)0(cid:1506) 3 Calibration Results for Modulation Res onse A UID Communication System Name mV dev (k=2) dB 0 cw X 0.0 0.0 1.0 0.00 149.0 +3.0 % + 4.7%
B C Y 0.0 0.0 1.0 142.6 Y 0.0 0.0 1.0 155.7 The reported uncertainty of measurementis stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximatey 95%. A The uncertainties of Norm X,Y,Z do not affectthe E2-field uncertainty inside TSL (see Pages 5 and 6). B Numericallinearization parameter: uncertainty notrequired. E Uncertainty is determined using the max. deviation from linearresponse applying rectangular distribution and is expressed forthe square ofthe field value. Certificate No: EX3-3819_Marl9 Page 3 of10 EX3DV4-SN.3819 March 1,2019 DASY/EASY - Parameters of Probe: EX3DV4 - SN.3819 Other Probe Parameters n Mode de ration Point ration Point ration Point nt Distance from Surface Triangular 112.8 enabled disabled 337 mm lo mm 9 mm 2.5 mm 1 mm 1 mm 1 mm 1.4 mm Certificate No: EX3-3819_Marl9 Page 4 of10 EX3DV4-SN:3819 March 1,2019 DASY/EASY - Parameters of Probe: EX3DV4 - SN:3819 Calibration Parameter Determined in Head Tissue Simulating Media f(MHz)c Relative PermittivityF Conductivity
(S/m)F ConvF X ConvF Y ConvF Z Alpha^
Depth
(mm) Unc
(k=2) 750 4(cid:833)9 0.89 10.00 10.00 10.00 0.42 1.05 12.0%
835 4(cid:1506)5 0.90 9.57 9.57 9.57 0.55 0.89 12.0%
900 41.5 0.97 9.43 9.43 9.43 0.41 1.05 12.0%
1450 40.5 (cid:4230) 20 8.68 8.68 8.68 0.29 0.80 12.0%
1750 40(cid:1506) (cid:1506) 37 8.54 8.54 8.54 0.40 0.89 12.0%
1900 40.0 1.40 8.27 8.27 8.27 0.23 0.99 12.0%
2000 40.0 (cid:5373) 40 8.20 8.20 8.20 0.35 0.86 12.0%
2300 39.5 1.67 7.64 7.64 7.64 0.37 0.86 12.0%
2450 39.2 (cid:1506) 80 7.21 7.21 7.21 0.34 0.92 + 12.0%
2600 39.0 (cid:1506) 96 7.06 7.06 7.06 0.38 0.89 12.0 %
3300 38.2 2.71 6.91 6.91 6.91 0.29 (cid:1506) 20 14.0 %
3500 37.9 2.91 6.89 6.89 6.89 0.25 1.20 14.0 %
3700 37.7 3 (cid:5373)2 6.67 6.67 6.67 0.25 (cid:1506) 25 14.0 %
5250 35.9 4.71 5.07 5.07 5.07 0.40 1.80 14.0 %
5600 35.5 5.07 4.70 4.70 4.70 0.40 1.80 14.0 %
5750 35.4 5.22 4.77 4.77 4.77 0.40 (cid:3108) 80 14.0 %
c Frequency validity above 300 MHz of +100 MHz only applies for DASY v4.4 and higher(see Page 2), else itis restricted to 50 MHz. The uncertainty is the RSS ofthe ConvF uncertainty at calibration frequency and the uncertainty forthe indicated frequency band. Frequency validity below 300 MHz is lo, 25, 40, 50 and 70 MHz for ConvF assessments at 30, 64,128,150 and 220 MHz respectively. Validity of ConvF assessed at 6 MHz is 4-9 MHz, and ConvF assessed at13 MHz is 9-19 MHz. Above 5 GHz frequency validity can be extended to 110 MHz. F Atfrequencies below 3 GHz,the validity oftissue parameters (e and <s) can be relaxed to + lo% ifliquid compensation formula is applied to measured SAR values. Atfrequencies above 3 GHz,the validity oftissue parameters (e and a)is restricted to 5%. The uncertainty is the RSS of the ConvF uncertainty forindicated targettissue parameters. G Alpha/Depth are determined during calibration. SPEAG warrants thatthe remaining deviation due to the boundary effect after compensation is always less than 1% forfrequencies below 3 GHz and below 2% forfrequencies between 3-6 GHz at any distance largerthan halfthe probe tip diameterfrom the boundary. Certificate No: EX3-3819_Marl9 Page 5 of10 EX3DV4-SN:3819 March 1,2019 DASY/EASY - Parameters of Probe: EX3DV4 - SN:3819 Calibration Parameter Determined in Body Tissue Simulating Media f(MHz)c Relative Conductivity PermittivityF Depth
(mm)
(S/m)F ConvF X ConvF Y ConvF Z Alpha0 Unc
(k=2) 750 55.5 0.96 9.68 9.68 9.68 0.69 0.80 12.0%
835 55.2 0.97 9.40 9.40 9.40 0.49 0.97 12.0%
900 55.0 (cid:1506) 05 9.36 9.36 9.36 0.50 0.92 12.0%
1750 53.4 1.49 8.06 8.06 8.06 0.33 0.85 12.0%
1900 53.3 1.52 7.66 7.66 7.66 0.25 (cid:5373) (cid:1506)(cid:1506) 12.0%
2300 52.9 (cid:1506) 8(cid:5373) 7.49 7.49 7.49 0.32 0.96 12.0%
2450 52.7 1.95 7.32 7.32 7.32 0.37 0.89 12.0%
2600 52.5 2.16 7.04 7.04 7.04 0.34 0.95 12.0 %
3300 51.6 3.08 6.60 6.60 6.60 0.28 (cid:4230) 20 14.0 %
3500 51.3 3.31 6.57 6.57 6.57 0.25 1.20 14.0 %
3700 51.0 3.55 6.37 6.37 6.37 0.30 1.25 14.0 %
5250 48.9 5.36 4.46 4.46 4.46 0.50 1.90 14.0 %
5600 48.5 5.77 3.92 3.92 3.92 0.50 (cid:1506) 90 14.0 %
5750 48.3 5.94 4.07 4.07 4.07 0.50 (cid:3151) 90 14.0 %
c Frequency validity above 300 MHz of 100 MHz only applies for DASY v4.4 and higher(see Page 2), else itis restricted to + 50 MHz. The uncertainty is the RSS ofthe ConvF uncertainty at calibration frequency and the uncertainty forthe indicated frequency band. Frequency validity below 300 MHz is + lo, 25, 40, 50 and 70 MHz for ConvF assessments at 30, 64,128,150 and 220 MHz respectively. Validity of ConvF assessed at 6 MHz is 4-9 MHz, and ConvF assessed at13 MHz is 9-19 MHz. Above 5 GHz frequency validity can be extended to 110 MHz. F Atfrequencies below 3 GHz,the validity oftissue parameters (e and a) can be relaxed to lo% ifliquid compensation formula is applied to measured SAR values. Atfrequencies above 3 GHz,the validity oftissue parameters (e and cr)is restricted to 5%. The uncertainty is the RSS of the ConvF uncertainty forindicated targettissue parameters. G Alpha/Depth are determined during calibration. SPEAG warrants thatthe remaining deviation due to the boundary effect after compensation is always less than 1% forfrequencies below 3 GHz and below 2% forfrequencies between 3-6 GHz at any distance largerthan halfthe probe tip diameterfrom the boundary. Certificate No: EX3-3819_Marl9 Page 6 of10 EX3DV4-SN:3819 March 1,2019 Frequency Response of E-Field
(TEM-Cell:ifill0 EXX, Waveguide: R22)
(cid:4659)
(cid:1986) N
(cid:2375)
(cid:3288) LO(cid:3517)
(cid:860)
(cid:3650)
(cid:1228) o(cid:4620)
(cid:849)
(cid:967)
(cid:4184)
(cid:3237)
(cid:860)
(cid:4350)
(cid:3755)
(cid:1307)
(cid:3318)
(cid:1597) 5
(cid:3108) 4
(cid:3238) 3
(cid:2764)
(cid:4162)
(cid:99) 2
(cid:3108)
(cid:833)
(cid:857) 0
(cid:857) 9
(cid:860) 8
(cid:2093) 7
(cid:3517) 6 0 5
(cid:3517)
(cid:4162) f[MHz]
tEm (cid:2029) tfiVl R22 Uncertainty of Frequency Response of E-field: 6.3% (k=2) Certificate No: EX3-3819_Marl9 Page 7 of10 Receiving Pattern (<|>), ^ = 0 EX3DV4-SN:3819 March 1,2019 so:(cid:99)
(cid:99)(cid:840)
(cid:99) (cid:99)
(cid:1504)
(cid:4162)
(cid:4162)(cid:176)
(cid:4162)X
(cid:99)
(cid:2317)
(cid:4071) Certificate No: EX3-3819_Marl9 Page 8 of10 EX3DV4-SN:3819 March 1,2019 Dynamic Range f(SARhead
(TEM cell,fevaF 1900 MHz)
) 2
@
0
(cid:4304)
(cid:3650)
(cid:3248)
(cid:3288) L0(cid:3751)
(cid:833)
@
(cid:3650) lo-2 lo-1 jo 101 102 SAR [mW/cm3]
(cid:3108)03 not compensated compensated Uncertainty of Linearity Assessment: 0.6% (k=2) Certificate No: EX3-3819_Marl9 Page 9 of10 EX3DV4-SN:3819 March 1,2019 Conversion Factor Assessment f = 835 MHz.WGLS R9 (H_convF) f = 1900 MHz.WGLS R22 (H_convF)
(cid:1683)
(cid:575)
\
(cid:831)
(cid:3650) 0
(cid:831)
(cid:3250)
(cid:845)
(cid:3569)
(cid:2471)
(cid:4191)
(cid:3949) S 5
(cid:845)- (cid:99)
(cid:2029)meauie (cid:4162)""""(cid:4162)"""""
i, lo 15 20 25 30 35 40
(cid:832)0 (cid:818) (cid:2992)
(cid:2029)
(cid:4373) z [mm]
(cid:1058)
@@
Deviation from Isotropy in Liquid z [mm]
(cid:2029)
(cid:2356) Error(<|),^),f = 900 MHz uoneiA9Q
(cid:2408)(cid:99)0 -0.8 -0.6 -0.4 -0.2 0.0 0.2 0.4 0.6 0(cid:99)8 (cid:2436)(cid:99)0 Uncertainty of SphericalIsotropy Assessment: (cid:3698)2.6% (k(cid:2408)2) Certificate No: EX3-3819_Marl9 Page lo of10
| 1 2 3 4 5 | Test report | Test Report | 5.36 MiB | August 02 2019 / August 05 2019 |
FCC RF Test Report Report No. : FR961801B FCC RF Test Report APPLICANT EQUIPMENT BRAND NAME MODEL NAME
: PAX Technology Limited
: Mobile Payment Terminal
: PAX
: D190 FCC ID
: V5PD190LTE STANDARD
: FCC Part 15 Subpart C 15.247 CLASSIFICATION
: (DTS) Digital Transmission System The product was received on Jun. 18, 2019 and testing was completed on Jul. 08, 2019. We, Sporton International (Shenzhen) Inc., would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of Sporton International (Shenzhen) Inc., the test report shall not be reproduced except in full. Reviewed by: Derreck Chen / Supervisor Approved by: Eric Shih / Manager Sporton International (ShenZhen) Inc. 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen, 518055 Peoples Republic of China Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 1 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Report No. : FR961801B TABLE OF CONTENTS REVISION HISTORY .......................................................................................................................................... 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .......................................................................................................................... 5 1.1 Applicant ............................................................................................................................................ 5 1.2 Manufacturer ...................................................................................................................................... 5 1.3 Product Feature of Equipment Under Test ........................................................................................ 5 1.4 Product Specification of Equipment Under Test ................................................................................ 6 1.5 Modification of EUT ........................................................................................................................... 6 1.6 Testing Location ................................................................................................................................ 6 1.7 Applicable Standards ......................................................................................................................... 7 2 TEST CONFIGURATION OF EQUIPMENT UNDER TEST ........................................................................ 8 2.1 Carrier Frequency Channel ............................................................................................................... 8 2.2 Test Mode .......................................................................................................................................... 9 2.3 Connection Diagram of Test System ............................................................................................... 10 2.4 Support Unit used in test configuration and system ........................................................................ 11 2.5 EUT Operation Test Setup .............................................................................................................. 11 2.6 Measurement Results Explanation Example ................................................................................... 11 3 TEST RESULT .......................................................................................................................................... 12 3.1 6dB and 99% Bandwidth Measurement .......................................................................................... 12 3.2 Output Power Measurement ............................................................................................................ 21 3.3 Power Spectral Density Measurement ............................................................................................ 22 3.4 Conducted Band Edges and Spurious Emission Measurement ..................................................... 31 3.5 Radiated Band Edges and Spurious Emission Measurement ........................................................ 40 3.6 AC Conducted Emission Measurement........................................................................................... 44 3.7 Antenna Requirements .................................................................................................................... 46 4 LIST OF MEASURING EQUIPMENT ........................................................................................................ 47 5 UNCERTAINTY OF EVALUATION ........................................................................................................... 48 APPENDIX A. CONDUCTED TEST RESULTS APPENDIX B. AC CONDUCTED EMISSION TEST RESULT APPENDIX C. RADIATED SPURIOUS EMISSION APPENDIX D. DUTY CYCLE PLOTS APPENDIX E. SETUP PHOTOGRAPHS Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 2 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Report No. : FR961801B REVISION HISTORY REPORT NO. VERSION DESCRIPTION ISSUED DATE FR961801B Rev. 01 Initial issue of report Jul. 29, 2019 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 3 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Report No. : FR961801B SUMMARY OF TEST RESULT Report Section FCC Rule Description Limit Result Remark 3.1 15.247(a)(2) 6dB Bandwidth 0.5MHz Pass 3.1
-
99% Bandwidth
-
Pass 3.2 15.247(b)(3) Peak Output Power 30dBm Pass 3.3 15.247(e) Power Spectral Density 8dBm/3kHz Pass 3.4 15.247(d) Conducted Band Edges and Spurious Emission 20dBc Pass
-
-
-
-
-
3.5 15.247(d) Radiated Band Edges 15.209(a) &
and Spurious Emission 15.247(d) Under limit Pass 5.00 dB at 56.190 MHz Under limit 3.6 15.207 AC Conducted Emission 15.207(a) Pass 3.07 dB at 0.460 MHz 3.7 15.203 &
15.247(b) Antenna Requirement N/A Pass
-
Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 4 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report 1 General Description 1.1 Applicant PAX Technology Limited Report No. : FR961801B Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong 1.2 Manufacturer PAX Computer Technology (Shenzhen) Co., Ltd. 4/F, No.3 Building, Software Park, Second Central Science-Tech Road, High-Tech industrial Park, Shenzhen, Guangdong, P.R.C. 1.3 Product Feature of Equipment Under Test Equipment Brand Name Model Name FCC ID EUT supports Radios application IMEI Code HW Version SW Version EUT Stage Product Feature Mobile Payment Terminal PAX D190 V5PD190LTE GSM/LTE/NFC WLAN 2.4GHz 802.11b/g/n HT20 WLAN 5GHz 802.11a/n HT20/HT40 WLAN 5GHz 802.11ac VHT20/VHT40/VHT80 Bluetooth BR/EDR/LE Conducted: 868197030036813 Conduction: 868197030032408 Radiation: N/A D190-xxx-xxx-xxxx V0.0.0.1 Production Unit Remark: The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 5 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Report No. : FR961801B 1.4 Product Specification of Equipment Under Test Standards-related Product Specification Tx/Rx Frequency Range Number of Channels Carrier Frequency of Each Channel Maximum Output Power to Antenna 99% Occupied Bandwidth Antenna Type / Gain Type of Modulation 2402 MHz ~ 2480 MHz 40 40 Channel(37 hopping + 3 advertising channel) Bluetooth v4.0 LE: 3.70 dBm (0.0023 W) Bluetooth v5.0 LE: 3.60 dBm (0.0023 W) Bluetooth v4.0 LE: 1.049MHz Bluetooth v5.0 LE: 2.066MHz FPC Antenna with gain -0.60 dBi Bluetooth LE : GFSK Note: For Bluetooth v4.0 LE and Bluetooth v5.0 LE mode, the RSE testing has assessed only Bluetooth v4.0 LE by referring to their maximum conducted power. 1.5 Modification of EUT No modifications are made to the EUT during all test items. 1.6 Testing Location Sporton International (Shenzhen) Inc. is accredited to ISO/IEC 17025:2017 by American Association for Laboratory Accreditation with Certificate Number 5145.01. Test Firm Sporton International (Shenzhen) Inc. Test Site Location 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen, 518055 Peoples Republic of China TEL: +86-755-86379589 FAX: +86-755-86379595 Sporton Site No. FCC Designation No. FCC Test Firm Registration No. Test Site No. CO01-SZ TH01-SZ CN1256 421272 Test Firm Sporton International (Shenzhen) Inc. Test Site Location No. 3 Bldg the third floor of south, Shahe River west, Fengzeyuan Warehouse, Nanshan Shenzhen, 518055 Peoples Republic of China TEL: +86-755-33202398 Test Site No. Sporton Site No. FCC Designation No. FCC Test Firm Registration No. 03CH02-SZ CN1256 421272 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 6 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report 1.7 Applicable Standards Report No. : FR961801B According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards:
47 CFR Part 15 Subpart C 15.247 FCC KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.10-2013 Remark:
1. All test items were verified and recorded according to the standards and without any deviation during the test. 2. This EUT has also been tested and complied with the requirements of FCC Part 15, Subpart B, recorded in a separate test report. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 7 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Report No. : FR961801B 2 Test Configuration of Equipment Under Test 2.1 Carrier Frequency Channel Frequency Band Channel 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 2400-2483.5 MHz Freq.
(MHz) 2402 2404 2406 2408 2410 2412 2414 2416 2418 2420 2422 2424 2426 2428 2430 2432 2434 2436 2438 2440 2442 Channel 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
-
-
Freq.
(MHz) 2444 2446 2448 2450 2452 2454 2456 2458 2460 2462 2464 2466 2468 2470 2472 2474 2476 2478 2480
-
-
Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 8 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report 2.2 Test Mode Report No. : FR961801B a. The EUT has been associated with peripherals and configuration operated in a manner tended to maximize its emission characteristics in a typical application. Frequency range investigated:
conduction emission (150 kHz to 30 MHz), radiation emission (9 kHz to the 10th harmonic of the highest fundamental frequency or to 40 GHz, whichever is lower). For radiated measurement, pre-scanned in three orthogonal panels, X, Y, Z. The worst cases (Z plane) were recorded in this report. b. AC power line Conducted Emission was tested under maximum output power. The following summary table is showing all test modes to demonstrate in compliance with the standard. Summary table of Test Cases Data Rate / Modulation Bluetooth LE / GFSK Mode 1: Bluetooth Tx CH00_2402 MHz_1Mbps Mode 2: Bluetooth Tx CH19_2440 MHz_1Mbps Mode 3: Bluetooth Tx CH39_2480 MHz_1Mbps Mode 1: Bluetooth Tx CH00_2402 MHz_1Mbps Mode 2: Bluetooth Tx CH19_2440 MHz_1Mbps Mode 3: Bluetooth Tx CH39_2480 MHz_1Mbps Mode 1 : GSM850 Idle + Bluetooth Link + WLAN Link (2.4G) + Battery + USB Cable(Charging from Adapter) Test Item Conducted TCs Radiated TCs AC Conducted Emission Remark: For Radiated Test Cases, The tests were performed with Adapter and USB Cable. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 9 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report 2.3 Connection Diagram of Test System For Radiation Report No. : FR961801B Power Source EUT For Conducted Emission System Simulator Bluetooth Earphone WLAN AP Notebook Power Source EUT Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 10 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Report No. : FR961801B 2.4 Support Unit used in test configuration and system Item Equipment Trade Name Model Name FCC ID Data Cable Power Cord 1. Base Station Anritsu MT8820C N/A N/A Unshielded,1.8m 2. WLAN AP D-Link DIR-820L KA2IR820LA1 N/A Unshielded,1.8m 3. Notebook Lenovo E540 FCC DoC N/A AC I/P:
Unshielded, 1.2 m DC O/P:
Shielded, 1.8 m 4. Bluetooth Earphone Samsung EO-MG900 N/A N/A N/A 2.5 EUT Operation Test Setup For BLE function, the engineering test program was provided and enabled to make EUT continuous transmit/receive. For AC power line conducted emissions, the EUT was set to connect with the WLAN AP under large package sizes transmission. 2.6 Measurement Results Explanation Example For all conducted test items:
The offset level is set in the spectrum analyzer to compensate the RF cable loss and attenuator factor between EUT conducted output port and spectrum analyzer. With the offset compensation, the spectrum analyzer reading level is exactly the EUT RF output level. Example :
The spectrum analyzer offset is derived from RF cable loss and attenuator factor. Offset = RF cable loss + attenuator factor. Following shows an offset computation example with cable loss 5.0 dB and 10dB attenuator. Offset(dB) = RF cable loss(dB) + attenuator factor(dB).
= 5.0 + 10 = 15.0 (dB) Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 11 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 Report No. : FR961801B FCC RF Test Report 3 Test Result 3.1 6dB and 99% Bandwidth Measurement 3.1.1 Limit of 6dB and 99% Bandwidth The minimum 6 dB bandwidth shall be at least 500 kHz. 3.1.2 Measuring Instruments The section 4.0 of List of Measuring Equipment of this test report is used for test. 3.1.3 Test Procedures 1. 2. The testing follows ANSI C63.10-2013 clause 11.8 The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. 3. Set to the maximum power setting and enable the EUT transmit continuously. 4. Make the measurement with the spectrum analyzer's resolution bandwidth (RBW) = 100 kHz. Set the Video bandwidth (VBW) = 300 kHz. In order to make an accurate measurement. The 6 dB bandwidth must be greater than 500 kHz. 5. For 99% Bandwidth Measurement, the spectrum analyzer's resolution bandwidth (RBW) is set 30kHz and set the Video bandwidth (VBW) = 100kHz. 6. Measure and record the results in the test report. 3.1.4 Test Setup Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 12 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report 3.1.5 Test Result of 6dB Bandwidth Please refer to Appendix A. Bluetooth v4.0 LE 6 dB Bandwidth Plot on Channel 00 Report No. : FR961801B Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 13 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Report No. : FR961801B 6 dB Bandwidth Plot on Channel 19 6 dB Bandwidth Plot on Channel 39 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 14 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Bluetooth v5.0 LE 6 dB Bandwidth Plot on Channel 00 Report No. : FR961801B 6 dB Bandwidth Plot on Channel 19 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 15 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Report No. : FR961801B 6 dB Bandwidth Plot on Channel 39 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 16 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report 3.1.6 Test Result of 99% Occupied Bandwidth Please refer to Appendix A. Bluetooth v4.0 LE 99% Bandwidth Plot on Channel 00 Report No. : FR961801B Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 17 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Report No. : FR961801B 99% Occupied Bandwidth Plot on Channel 19 99% Occupied Bandwidth Plot on Channel 39 Note : The occupied channel bandwidth is maintained within the band of operation for all of the modulations. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 18 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Bluetooth v5.0 LE 99% Bandwidth Plot on Channel 00 Report No. : FR961801B 99% Occupied Bandwidth Plot on Channel 19 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 19 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Report No. : FR961801B 99% Occupied Bandwidth Plot on Channel 39 Note : The occupied channel bandwidth is maintained within the band of operation for all of the modulations. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 20 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report 3.2 Output Power Measurement 3.2.1 Limit of Output Power Report No. : FR961801B For systems using digital modulation in the 2400-2483.5MHz, the limit for output power is 30dBm. If transmitting antenna of directional gain greater than 6dBi is used, the output power from the intentional radiator shall be reduced below the above stated value by the amount in dB that the directional gain of the antenna exceeds 6 dBi. In case of point-to-point operation, the limit has to be reduced by 1dB for every 3dB that the directional gain of the antenna exceeds 6dBi. 3.2.2 Measuring Instruments The section 4.0 of List of Measuring Equipment of this test report is used for test. 3.2.3 Test Procedures 1. The testing follows the Measurement Procedure of ANSI C63.10-2013 clause 11.9.1.3 PKPM1 Peak power meter or ANSI C63.10-2013 clause 11.9.2.3.2 Method AVGPM-G method. 2. The RF output of EUT was connected to the power meter by RF cable and attenuator. The path loss was compensated to the results for each measurement. 3. Set to the maximum power setting and enable the EUT transmit continuously. 4. Measure the conducted output power and record the results in the test report. 3.2.4 Test Setup 3.2.5 Test Result of Average Output Power Please refer to Appendix A. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 21 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report 3.3 Power Spectral Density Measurement 3.3.1 Limit of Power Spectral Density Report No. : FR961801B The peak power spectral density shall not be greater than 8dBm in any 3kHz band at any time interval of continuous transmission. 3.3.2 Measuring Instruments The section 4.0 of List of Measuring Equipment of this test report is used for test. 3.3.3 Test Procedures 1. The testing follows Measurement Procedure of ANSI C63.10-2013 clause 11.10.2 Method PKPSD. 2. The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. 3. Set to the maximum power setting and enable the EUT transmit continuously. 4. Make the measurement with the spectrum analyzer's resolution bandwidth (RBW) = 3 kHz. Video bandwidth VBW = 10 kHz In order to make an accurate measurement, set the span to 1.5 times DTS Channel Bandwidth. (6dB BW) 5. Detector = peak, Sweep time = auto couple, Trace mode = max hold, Allow trace to fully stabilize. Use the peak marker function to determine the maximum power level. 6. Measure and record the results in the test report. 7. The Measured power density (dBm)/ 100kHz is a reference level and used as 20dBc down limit line for Conducted Band Edges and Conducted Spurious Emission. 3.3.4 Test Setup 3.3.5 Test Result of Power Spectral Density Please refer to Appendix A. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 22 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report 3.3.6 Test Result of Power Spectral Density Plots (100kHz) Bluetooth v4.0 LE PSD 100kHz Plot on Channel 00 Report No. : FR961801B PSD 100kHz Plot on Channel 19 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 23 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Report No. : FR961801B PSD 100kHz Plot on Channel 39 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 24 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Bluetooth v5.0 LE PSD 100kHz Plot on Channel 00 Report No. : FR961801B PSD 100kHz Plot on Channel 19 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 25 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Report No. : FR961801B PSD 100kHz Plot on Channel 39 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 26 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report 3.3.7 Test Result of Power Spectral Density Plots (3kHz) Bluetooth v4.0 LE PSD 3kHz Plot on Channel 00 Report No. : FR961801B PSD 3kHz Plot on Channel 19 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 27 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Report No. : FR961801B PSD 3kHz Plot on Channel 39 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 28 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Bluetooth v5.0 LE PSD 3kHz Plot on Channel 00 Report No. : FR961801B PSD 3kHz Plot on Channel 19 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 29 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Report No. : FR961801B PSD 3kHz Plot on Channel 39 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 30 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Report No. : FR961801B 3.4 Conducted Band Edges and Spurious Emission Measurement 3.4.1 Limit of Conducted Band Edges and Spurious Emission All harmonics/spurious must be at least 20 dB down from the highest emission level within the authorized band. 3.4.2 Measuring Instruments The section 4.0 of List of Measuring Equipment of this test report is used for test. 3.4.3 Test Procedure 1. The testing follows ANSI C63.10-2013 clause 11.13 2. The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. 3. Set to the maximum power setting and enable the EUT transmit continuously. 4. Set RBW = 100 kHz, VBW=300 kHz, Peak Detector. Unwanted Emissions measured in any 100 kHz bandwidth outside of the authorized frequency band shall be attenuated by at least 20 dB relative to the maximum in-band peak PSD level in 100 kHz when maximum peak conducted output power procedure is used. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. 5. Measure and record the results in the test report. 6. The RF fundamental frequency should be excluded against the limit line in the operating frequency band. 3.4.4 Test Setup Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 31 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report 3.4.5 Test Result of Conducted Band Edges Plots Bluetooth v4.0 LE Low Band Edge Plot on Channel 00 Report No. : FR961801B High Band Edge Plot on Channel 39 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 32 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Bluetooth v5.0 LE Low Band Edge Plot on Channel 00 Report No. : FR961801B High Band Edge Plot on Channel 39 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 33 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Report No. : FR961801B 3.4.6 Test Result of Conducted Spurious Emission Plots Bluetooth v4.0 LE Conducted Spurious Emission Plot on Bluetooth LE 1Mbps GFSK Channel 00 Conducted Spurious Emission Plot on Bluetooth LE 1Mbps GFSK Channel 00 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 34 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Report No. : FR961801B Conducted Spurious Emission Plot on Bluetooth LE 1Mbps GFSK Channel 19 Conducted Spurious Emission Plot on Bluetooth LE 1Mbps GFSK Channel 19 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 35 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Report No. : FR961801B Conducted Spurious Emission Plot on Bluetooth LE 1Mbps GFSK Channel 39 Conducted Spurious Emission Plot on Bluetooth LE 1Mbps GFSK Channel 39 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 36 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Report No. : FR961801B Bluetooth v5.0 LE Conducted Spurious Emission Plot on Bluetooth LE 1Mbps GFSK Channel 00 Conducted Spurious Emission Plot on Bluetooth LE 1Mbps GFSK Channel 00 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 37 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Report No. : FR961801B Conducted Spurious Emission Plot on Bluetooth LE 1Mbps GFSK Channel 19 Conducted Spurious Emission Plot on Bluetooth LE 1Mbps GFSK Channel 19 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 38 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Report No. : FR961801B Conducted Spurious Emission Plot on Bluetooth LE 1Mbps GFSK Channel 39 Conducted Spurious Emission Plot on Bluetooth LE 1Mbps GFSK Channel 39 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 39 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Report No. : FR961801B 3.5 Radiated Band Edges and Spurious Emission Measurement 3.5.1 Limit of Radiated Band Edges and Spurious Emission In any 100 kHz bandwidth outside the intentional radiator frequency band, all harmonics/spurious must be at least 20 dB below the highest emission level within the authorized band. If the output power of this device was measured by spectrum analyzer, the attenuation under this paragraph shall be 30 dB instead of 20 dB. In addition, radiated emissions which fall in the restricted bands must also comply with the limits as below. Frequency
(MHz) 0.009 0.490 0.490 1.705 1.705 30.0 30 88 88 216 216 - 960 Above 960 Field Strength Measurement Distance
(microvolts/meter)
(meters) 2400/F(kHz) 24000/F(kHz) 30 100 150 200 500 300 30 30 3 3 3 3 3.5.2 Measuring Instruments The section 4.0 of List of Measuring Equipment of this test report is used for test. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 40 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report 3.5.3 Test Procedures Report No. : FR961801B 1. 2. The testing follows ANSI C63.10-2013 clause 11.11 & 11.12 The EUT was arranged to its worst case and then tune the antenna tower (from 1 m to 4 m) and turntable (from 0 degree to 360 degrees) to find the maximum reading. A pre-amp and a high pass filter are used for the test in order to get better signal level. 3. The EUT was placed on a turntable with 0.8 meter for frequency below 1GHz and 1.5 meter for frequency above 1GHz respectively above ground. 4. The EUT was set 3 meters from the interference receiving antenna, which was mounted on the top of a variable height antenna tower. 5. 6. Corrected Reading: Antenna Factor + Cable Loss + Read Level - Preamp Factor = Level For testing below 1GHz, if the emission level of the EUT in peak mode was 3 dB lower than the limit specified, then peak values of EUT will be reported, otherwise, the emissions will be repeated one by one using the CISPR quasi-peak method and reported. 7. For testing above 1GHz, the emission level of the EUT in peak mode was 20dB lower than average limit (that means the emission level in average mode also complies with the limit in average mode), then peak values of EUT will be reported, otherwise, the emissions will be measured in average mode again and reported. 8. Use the following spectrum analyzer settings:
(1) Span shall wide enough to fully capture the emission being measured;
(2) Set RBW=100 kHz for f < 1 GHz; VBW RBW; Sweep = auto; Detector function = peak;
Trace = max hold;
(3) Set RBW = 1 MHz, VBW= 3MHz for f 1 GHz for peak measurement. For average measurement:
VBW = 10 Hz, when duty cycle is no less than 98 percent. VBW 1/T, when duty cycle is less than 98 percent where T is the minimum transmission duration over which the transmitter is on and is transmitting at its maximum power control level for the tested mode of operation. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 41 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report 3.5.4 Test Setup For radiated emissions below 30MHz Report No. : FR961801B For radiated emissions from 30MHz to 1GHz For radiated emissions above 1GHz Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 42 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Report No. : FR961801B 3.5.5 Test Results of Radiated Spurious Emissions (9 kHz ~ 30 MHz) The low frequency, which started from 9 kHz to 30MHz, was pre-scanned and the result which was 20dB lower than the limit line was not reported. There is a comparison data of both open-field test site and semi-Anechoic chamber, and the result came out very similar. 3.5.6 Test Result of Radiated Spurious at Band Edges Please refer to Appendix C. 3.5.7 Duty Cycle Please refer to Appendix D. 3.5.8 Test Result of Radiated Spurious Emission (30MHz ~ 10th Harmonic) Please refer to Appendix C. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 43 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report 3.6 AC Conducted Emission Measurement 3.6.1 Limit of AC Conducted Emission Report No. : FR961801B For equipment that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies within the band 150 kHz to 30 MHz shall not exceed the limits in the following table. Frequency of emission (MHz) Conducted limit (dBV) 0.15-0.5 0.5-5 5-30 Quasi-peak 66 to 56*
56 60 Average 56 to 46*
46 50
*Decreases with the logarithm of the frequency. 3.6.2 Measuring Instruments The section 4.0 of List of Measuring Equipment of this test report is used for test. 3.6.3 Test Procedures 1. The EUT was placed 0.4 meter from the conducting wall of the shielding room was kept at least 80 centimeters from any other grounded conducting surface. 2. Connect EUT to the power mains through a line impedance stabilization network (LISN). 3. All the support units are connecting to the other LISN. 4. The LISN provides 50 ohm coupling impedance for the measuring instrument. 5. The FCC states that a 50 ohm, 50 microhenry LISN should be used. 6. Both sides of AC line were checked for maximum conducted interference. 7. The frequency range from 150 kHz to 30 MHz was searched. 8. Set the test-receiver system to Peak Detect Function and specified bandwidth (IF Bandwidth =
9kHz) with Maximum Hold Mode. Then measurement is also conducted by Average Detector and Quasi-Peak Detector Function respectively. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 44 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report 3.6.4 Test Setup Report No. : FR961801B 3.6.5 Test Result of AC Conducted Emission Please refer to Appendix B. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 45 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report 3.7 Antenna Requirements 3.7.1 Standard Applicable Report No. : FR961801B If directional gain of transmitting antennas is greater than 6dBi, the power shall be reduced by the same level in dB comparing to gain minus 6dBi. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the rule. 3.7.2 Antenna Anti-Replacement Construction An embedded-in antenna design is used. 3.7.3 Antenna Gain The antenna peak gain of EUT is less than 6 dBi. Therefore, it is not necessary to reduce maximum peak output power limit. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 46 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report 4 List of Measuring Equipment Report No. : FR961801B Instrument Manufacturer Model No. Serial No. Characteristics Calibration Date Test Date Due Date Remark Spectrum Analyzer Pulse Power Senor R&S FSV40 101078 10Hz~40GHz Apr. 18, 2019 Jul. 02, 2019 Apr. 17, 2020 Anritsu MA2411B 1207253 30MHz~40GHz Dec. 22, 2018 Jul. 02, 2019 Dec. 21, 2019 Power Meter Anritsu ML2495A 1218010 50MHz Bandwidth Dec. 22, 2018 Jul. 02, 2019 Dec. 21, 2019 EXA Spectrum Analyzer KEYSIGHT N9010A MY551502 13 10Hz~44GHz Apr. 19, 2019 Loop Antenna R&S HFH2-Z2 100354 9kHz~30MHz May 29, 2019 Bilog Antenna TeseQ CBL6112D 35408 30MHz-2GHz Apr. 19, 2019 Double Ridge SCHWARZBE Horn Antenna CK HF Amplifier MITEQ BBHA 9120D TTA1840-35-
HG 9120D-128 5 1GHz~18GHz Jan. 07, 2019 1871923 18GHz~40GHz Jul. 16, 2018 SHF-EHF Horn com-power AH-840 101071 18Ghz-40GHz Mar. 30, 2019 LF Amplifier Burgeon BPA-530 102211 0.01~3000Mhz Oct. 18, 2018 HF Amplifier MITEQ 1800-30-10P-
1707137 1GHz~18GHz Oct. 20, 2018 AMF-7D-0010 Amplifier Agilent 8449B R AC Power Source Chroma 61601 3008A010 23 616010002 470 1GHz~26.5GHz Oct. 18, 2018 N/A NCR Turn Table Chaintek T-200 N/A 0~360 degree NCR Antenna Mast Chaintek MBS-400 N/A 1 m~4 m NCR Jul. 02, 2019~
Jul. 08, 2019 Jul. 02, 2019~
Jul. 08, 2019 Jul. 02, 2019~
Jul. 08, 2019 Jul. 02, 2019~
Jul. 08, 2019 Jul. 02, 2019~
Jul. 08, 2019 Jul. 02, 2019~
Jul. 08, 2019 Jul. 02, 2019~
Jul. 08, 2019 Jul. 02, 2019~
Jul. 08, 2019 Jul. 02, 2019~
Jul. 08, 2019 Jul. 02, 2019~
Jul. 08, 2019 Jul. 02, 2019~
Jul. 08, 2019 Jul. 02, 2019~
Jul. 08, 2019 Apr. 18, 2020 May 28, 2020 Apr. 18, 2020 Jan. 06, 2020 Jul. 15, 2019 Mar. 29, 2020 Oct. 17, 2019 Oct. 19, 2019 Oct. 17, 2019 NCR NCR NCR EMI Receiver R&S ESR7 101630 9kHz~7GHz; Dec. 23, 2018 Jun. 21, 2019 Dec. 22, 2019 AC LISN EMCO 3816/2SH 00103912 9kHz~30MHz Oct. 18, 2018 Jun. 21, 2019 Oct. 17, 2019 AC LISN
(for auxiliary EMCO 3816/2SH 00103892 9kHz~30MHz Dec. 23, 2018 Jun. 21, 2019 Dec. 22, 2019 equipment) AC Power Source Chroma 61602 616020000 891 NCR: No Calibration Required 100Vac~250Vac Jul. 18, 2018 Jun. 21, 2019 Jul. 17, 2019 Conducted
(TH01-SZ) Conducted
(TH01-SZ) Conducted
(TH01-SZ) Radiation
(03CH02-SZ) Radiation
(03CH02-SZ) Radiation
(03CH02-SZ) Radiation
(03CH02-SZ) Radiation
(03CH02-SZ) Radiation
(03CH02-SZ) Radiation
(03CH02-SZ) Radiation
(03CH02-SZ) Radiation
(03CH02-SZ) Radiation
(03CH02-SZ) Radiation
(03CH02-SZ) Radiation
(03CH02-SZ) Conduction
(CO01-SZ) Conduction
(CO01-SZ) Conduction
(CO01-SZ) Conduction
(CO01-SZ) Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 47 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report 5 Uncertainty of Evaluation Report No. : FR961801B The measurement uncertainties shown below were calculated in accordance with the requirements of ANSI 63.10-2013. All the measurement uncertainty value were shown with a coverage K=2 to indicate 95% level of confidence. The measurement data show herein meets or exceeds the CISPR measurement uncertainty values specified in CISPR 16-4-2 and can be compared directly to specified limit to determine compliance. Uncertainty of Conducted Emission Measurement (150 kHz ~ 30 MHz) Measuring Uncertainty for a Level of Confidence of 95% (U = 2Uc(y)) Uncertainty of Radiated Emission Measurement (30 MHz ~ 1000 MHz) Measuring Uncertainty for a Level of Confidence of 95% (U = 2Uc(y)) 2.6 dB 5.1 dB Uncertainty of Radiated Emission Measurement (1000 MHz ~ 18000 MHz) Measuring Uncertainty for a Level of Confidence of 95% (U = 2Uc(y)) 5.0 dB Uncertainty of Radiated Emission Measurement (18000 MHz ~ 40000 MHz) Measuring Uncertainty for a Level of Confidence of 95% (U = 2Uc(y)) 4.4 dB Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: 48 of 48 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CBT4.0/5.0 Version 2.0 FCC RF Test Report Appendix A. Conducted Test Results Report No. : FR961801B Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: A1 of A1 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Number :
FR961801B Bluetooth v4.0 Low Energy Test Engineer:
Test Date:
Hayden Chen 2019/07/02 Temperature:
Relative Humidity:
21~25 51~54 C
%
TEST RESULTS DATA 6dB and 99% Occupied Bandwidth Mod. Data Rate NTX CH. Freq.
(MHz) 99%
Occupied BW
(MHz) 6dB BW
(MHz) 6dB BW Limit
(MHz) Pass/Fail BLE 1Mbps BLE 1Mbps BLE 1Mbps 1 1 1 0 19 39 2402 2440 2480 1.049 1.047 1.049 0.719 0.715 0.715 0.50 0.50 0.50 Pass Pass Pass TEST RESULTS DATA Average Power Table Mod. Data Rate NTX CH. Freq.
(MHz) Duty Factor
(dB) Average Conducted Power
(dBm) BLE 1Mbps BLE 1Mbps BLE 1Mbps 1 1 1 0 19 39 2402 2440 2480 2.04 2.04 2.04 3.60 3.70 3.50 TEST RESULTS DATA Power Density Mod. Data Rate NTX CH. Freq.
(MHz) Peak PSD Peak PSD
(dBm
/100kHz)
(dBm
/3kHz) BLE 1Mbps BLE 1Mbps BLE 1Mbps 1 1 1 0 19 39 2402 2440 2480 2.99 3.24 3.24
-10.42
-10.32
-10.18 DG
(dBi)
-0.60
-0.60
-0.60 Peak PSD Limit
(dBm
/3kHz) Pass/Fail 8.00 8.00 8.00 Pass Pass Pass Note: PSD (dBm/ 100kHz) is a reference level used for Conducted Band Edges and Conducted Spurious Emission 20dBc limit. A1 of A2 Report Number :
FR961801B Bluetooth v5.0 Low Energy Test Engineer:
Test Date:
Hayden Chen 2019/07/02 Temperature:
Relative Humidity:
21~25 51~54 C
%
TEST RESULTS DATA 6dB and 99% Occupied Bandwidth Mod. Data Rate NTX CH. Freq.
(MHz) 99%
Occupied BW
(MHz) 6dB BW
(MHz) 6dB BW Limit
(MHz) Pass/Fail BLE5.0 2Mbps BLE5.0 2Mbps BLE5.0 2Mbps 1 1 1 0 19 39 2402 2440 2480 2.066 2.062 2.066 1.115 1.111 1.111 0.50 0.50 0.50 Pass Pass Pass TEST RESULTS DATA Average Power Table Mod. Data Rate NTX CH. Freq.
(MHz) Duty Factor
(dB) Average Conducted Power
(dBm) BLE5.0 2Mbps BLE5.0 2Mbps BLE5.0 2Mbps 1 1 1 0 19 39 2402 2440 2480 4.83 4.83 4.83 3.40 3.60 3.40 TEST RESULTS DATA Power Density Mod. Data Rate NTX CH. Freq.
(MHz) Peak PSD Peak PSD
(dBm
/100kHz)
(dBm
/3kHz) BLE5.0 2Mbps BLE5.0 2Mbps BLE5.0 2Mbps 1 1 1 0 19 39 2402 2440 2480 2.81 3.13 3.20
-13.67
-13.27
-13.33 DG
(dBi)
-0.60
-0.60
-0.60 Peak PSD Limit
(dBm
/3kHz) Pass/Fail 8.00 8.00 8.00 Pass Pass Pass Note: PSD (dBm/ 100kHz) is a reference level used for Conducted Band Edges and Conducted Spurious Emission 20dBc limit. A2 of A2 FCC RF Test Report Report No. : FR961801B Appendix B. AC Conducted Emission Test Results Test Engineer : Bear Xiong Temperature :
22~25 Relative Humidity : 50~55%
Test Voltage :
120Vac / 60Hz Phase :
Line Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: B1 of B2 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 FCC RF Test Report Report No. : FR961801B Test Engineer : Bear Xiong Test Voltage :
120Vac / 60Hz Temperature :
22~25 Relative Humidity : 50~55%
Phase :
Neutral Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: B2 of B2 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 FCC RF Test Report Report No. : FR961801B Appendix C. Radiated Spurious Emission BLE Note Frequency Level Over Limit Read Antenna Cable Preamp Ant Table Peak Pol. 2.4GHz 2400~2483.5MHz BLE (Band Edge @ 3m) BLE CH 00 2402MHz BLE CH 19 2440MHz
*
*
*
*
*
*
*
*
( MHz ) Factor
( dBV/m ) ( dB ) ( dBV/m ) ( dBV ) ( dB/m ) Level Limit Line Loss Factor Pos Pos Avg.
( dB )
( cm ) ( deg ) (P/A) (H/V)
( dB ) 2355.15 45.59
-28.41 2354.21 36.97
-17.03 2402 2402 93.2 92.59
-
-
2387.18 45.95
-28.05 2389.38 37.43
-16.57 2402 2402 96.42 95.8
-
-
2378.04 45.93
-28.07 2374.54 36.46
-17.54 2440 2440 94.01 93.42
-
-
2486.7 46.89
-27.11 2497.69 37.16
-16.84 2329.18 45.56
-28.44 2326.94 36.98
-17.02 2440 2440 97.39 96.75
-
-
2485.16 48.07
-25.93 2485.23 37.45
-16.55 74 54
-
-
74 54
-
-
74 54
-
-
74 54 74 54
-
-
74 54 44.89 26.99 6.53 32.82 113 215 36.27 26.99 6.53 32.82 113 215 92.31 27.07 91.7 27.07 6.6 6.6 32.78 113 215 32.78 113 215 45.11 27.07 6.57 32.8 167 276 36.56 27.07 95.53 27.07 94.91 27.07 6.6 6.6 6.6 32.8 167 276 32.78 167 276 32.78 167 276 45.13 27.03 6.57 32.8 113 226 35.66 27.03 6.57 32.8 113 226 92.9 27.2 6.67 32.76 113 226 92.31 27.2 6.67 32.76 113 226 45.62 27.29 6.7 32.72 113 226 35.8 27.33 6.73 32.7 113 226 44.99 26.91 36.41 26.91 6.5 6.5 32.84 143 275 32.84 143 275 96.28 27.2 6.67 32.76 143 275 95.64 27.2 6.67 32.76 143 275 46.8 27.29 36.18 27.29 6.7 6.7 32.72 143 275 32.72 143 275 P A P A P A P A P A P A P A P A P A P A H H H H V V V V H H H H H H V V V V V V Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number Report Issued Date
: C1 of C6
: Jul. 29, 2019 Report Version
: Rev. 01 BLE CH 39 2480MHz Remark FCC RF Test Report Report No. : FR961801B
*
*
*
*
2480 2480 2498 94.91 94.27
-
-
46.84
-27.16 2483.76 37.81
-16.19 2480 2480 97.55 96.95
-
-
2498.28 46.53
-27.47 2483.84 38.11
-15.89
-
-
74 54
-
-
74 54 93.64 27.29 6.7 32.72 100 212 P H 93 27.29 6.7 32.72 100 212 A H 45.48 27.33 6.73 32.7 100 212 P H 36.54 27.29 6.7 32.72 100 212 A H 96.28 27.29 6.7 32.72 143 271 95.68 27.29 6.7 32.72 143 271 45.17 27.33 6.73 32.7 143 271 36.84 27.29 6.7 32.72 143 271 P A P A V V V V 1. No other spurious found. 2. All results are PASS against Peak and Average limit line. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number Report Issued Date
: C2 of C6
: Jul. 29, 2019 Report Version
: Rev. 01 FCC RF Test Report Report No. : FR961801B 2.4GHz 2400~2483.5MHz BLE (Harmonic @ 3m) BLE Note Frequency Level Over Limit Read Antenna Cable Preamp Ant Table Peak Pol. BLE CH 00 2402MHz BLE CH 19 2440MHz BLE CH 39 2480MHz Remark
( MHz ) Factor
( dBV/m ) ( dB ) ( dBV/m ) ( dBV ) ( dB/m ) Level Limit Line Loss Factor Pos Pos Avg.
( dB )
( cm ) ( deg ) (P/A) (H/V)
( dB ) 4804 41.8
-32.2 74 58.65 31.01 9.61 57.47 160 360 P H 4804 42.69
-31.31 74 59.54 31.01 9.61 57.47 160 360 4880 7320 4880 7320 4960 7440 4960 7440 41.51
-32.49 46.92
-27.08 42.32
-31.68 46.69
-27.31 42.47
-31.53 46.36
-27.64 41.77
-32.23 46.51
-27.49 74 74 74 74 74 74 74 74 58.26 31.06 9.71 57.52 160 360 57.84 35.97 12.04 58.93 160 360 59.07 31.06 9.71 57.52 160 360 57.61 35.97 12.04 58.93 160 360 59.12 31.12 9.81 57.58 160 360 56.9 36.29 12.15 58.98 160 360 58.42 31.12 9.81 57.58 160 360 57.05 36.29 12.15 58.98 160 360 P P P P P P P P P V H H V V H H V V 1. No other spurious found. 2. All results are PASS against Peak and Average limit line. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number Report Issued Date
: C3 of C6
: Jul. 29, 2019 Report Version
: Rev. 01 FCC RF Test Report Report No. : FR961801B BLE Note Frequency Level Over Limit Read Antenna Cable Preamp Ant Table Peak Pol. Emission below 1GHz 2.4GHz BLE (LF) Limit Line Level Factor Loss Factor Pos Pos Avg.
( MHz )
( dBV/m ) ( dB ) ( dBV/m ) (dBV) ( dB/m )
( dB )
( dB ) ( cm ) ( deg ) (P/A) (H/V) 2.4GHz BLE LF 30 27.22
-12.78 56.19 25.33
-14.67 40 40 34.36 24.8 0.56 32.5 44.25 12.76 0.77 32.45
-
-
-
-
191.99 34.01
-9.49 43.5 49.33 15.06 1.43 31.81 198 162 248.25 34.36
-11.64 391.81 33.1
-12.9 928.22 29.52
-16.48 30 34.24
-5.76 56.19 82.38 35
-5 30.5
-9.5 46 46 46 40 40 40 45.77 18.74 1.65 31.8 41.11 21.61 2.1 31.72 27.92 29.45 3.36 31.21 41.38 24.8 0.56 32.5
-
-
-
-
-
-
-
-
53.92 12.76 0.77 32.45 100 255 47.88 13.68 0.94 32 176.47 29.03
-14.47 43.5 44.26 15.27 1.35 31.85 264.74 28.34
-17.66 621.7 27.75
-18.25 46 46 38.42 20.07 1.71 31.86 30.71 25.99 2.72 31.67
-
-
-
-
-
-
-
-
P P P P P P P P P P P P H H H H H H V V V V V V Remark 1. No other spurious found. 2. All results are PASS against limit line. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number Report Issued Date
: C4 of C6
: Jul. 29, 2019 Report Version
: Rev. 01 FCC RF Test Report Report No. : FR961801B Note symbol
*
!
Fundamental Frequency which can be ignored. However, the level of any unwanted emissions shall not exceed the level of the fundamental frequency. Test result is over limit line. P/A Peak or Average H/V Horizontal or Vertical Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number Report Issued Date
: C5 of C6
: Jul. 29, 2019 Report Version
: Rev. 01 FCC RF Test Report Report No. : FR961801B A calculation example for radiated spurious emission is shown as below:
WIFI Note Frequency Level Over Limit Read Antenna Cable Preamp Ant Table Peak Pol. Ant. 1+2 802.11b CH 01 2412MHz
( MHz ) Factor
( dBV/m ) ( dB ) ( dBV/m ) ( dBV ) ( dB/m ) Level Limit Line Loss Factor Pos Pos Avg.
( dB )
( cm ) ( deg ) (P/A) (H/V)
( dB ) 2390 55.45
-18.55 74 54.51 32.22 4.58 35.86 103 308 P H 2390 43.54
-10.46 54 42.6 32.22 4.58 35.86 103 308 A H 1. Level(dBV/m) =
Antenna Factor(dB/m) + Cable Loss(dB) + Read Level(dBV) - Preamp Factor(dB) 2. Over Limit(dB) = Level(dBV/m) Limit Line(dBV/m) For Peak Limit @ 2390MHz:
1. Level(dBV/m)
= Antenna Factor(dB/m) + Cable Loss(dB) + Read Level(dBV) - Preamp Factor(dB)
= 32.22(dB/m) + 4.58(dB) + 54.51(dBV) 35.86 (dB)
= 55.45 (dBV/m) 2. Over Limit(dB)
= Level(dBV/m) Limit Line(dBV/m)
= 55.45(dBV/m) 74(dBV/m)
= -18.55(dB) For Average Limit @ 2390MHz:
1. Level(dBV/m)
= Antenna Factor(dB/m) + Cable Loss(dB) + Read Level(dBV) - Preamp Factor(dB)
= 32.22(dB/m) + 4.58(dB) + 42.6(dBV) 35.86 (dB)
= 43.54 (dBV/m) 2. Over Limit(dB)
= Level(dBV/m) Limit Line(dBV/m)
= 43.54(dBV/m) 54(dBV/m)
= -10.46(dB) Both peak and average measured complies with the limit line, so test result is PASS. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number Report Issued Date
: C6 of C6
: Jul. 29, 2019 Report Version
: Rev. 01 FCC RF Test Report Appendix D. Duty Cycle Plots Report No. : FR961801B Band Duty Cycle(%) T(ms) 1/T(KHz) VBW Setting Bluetooth v4.0 LE 62.50 0.3913 2.556 3kHz Bluetooth v4.0 LE Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PD190LTE Page Number
: D1 of D1 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01
| 1 2 3 4 5 | Reference test report part 1 | Test Report | 1.02 MiB | August 02 2019 / August 05 2019 |
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053
+86 (0) 755 2671 0594 Fax:
Email:
ee.shenzhen@sgs.com Report No.: SZEM180400321702 Page: 1 of 31 FCC TEST REPORT Application No:
SZEM1804003217RG Applicant:
Address of Applicant Manufacturer:
Address of Manufacturer Factory:
Address of Factory:
Product Name:
Model No.(EUT):
Trade Mark:
FCC ID:
Standards:
Fibocom Wireless Inc. 5/F, Tower A, Technology Building II, 1057 Nanhai Avenue, Shenzhen, China Fibocom Wireless Inc. 5/F, Tower A, Technology Building II, 1057 Nanhai Avenue, Shenzhen, China Shenzhen Eternity Technology Co., Ltd 1F, 2F, 4F Building A2, Yingzhan Industrial Zone, Longtian Community, Longtian Road, Pingshan District, Shenzhen, Guangdong Province, P.R. China LTE (CatM1,NB-IOT) Module M910-GL Fibocom ZMOM910GL 47 CFR Part 2 47 CFR Part 22 subpart H 47 CFR Part 24 subpart E 47 CFR Part 27 subpart C Test Method:
47 CFR Part 90 subpart S FCC KDB 971168 D01 Power Meas License Digital Systems V03r01 TIA-603-E 2016 Date of Receipt:
2018-06-21 Date of Test:
Date of Issue:
Test Result:
2018-06-25 to 2018-08-05 2018-08-08 PASS *
* In the configuration tested, the EUT detailed in this report complied with the standards specified above. Authorized Signature:
Derek Yang Wireless Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 2 of 31 1 Version Version Chapter Date Modifier Revision Record 01 2018-08-08 Remark Original 2018-08-08 Date 2018-08-08
(Mike Hu) /Project Engineer
(David Chen) /Reviewer Date Authorized for issue by:
Tested By Checked By This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 3 of 31 Content Page 1 VERSION 2 TEST SUMMARY 2.1 2.2 2.3 2.4 2.5 2.6 GSM850/ LTE BAND 5/26 (824-849 MHZ) GSM1900/LTE BAND 2 (1850-1915 MHZ) LTE BAND 4 (1710-1780 MHZ) LTE BAND 12 (699-716MHZ) LTE BAND 13 (777-787MHZ) LTE BAND 26 (814-824 MHZ) 3 GENERAL INFORMATION 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 CLIENT INFORMATION GENERAL DESCRIPTION OF EUT TEST MODE FREQUENCY LIST OF LOW/MIDDLE/HIGH CHANNELS TEST ENVIRONMENT TEST LOCATION TEST FACILITY DEVIATION FROM STANDARDS ABNORMALITIES FROM STANDARD CONDITIONS 3.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER 3.11 TECHNICAL SPECIFICATION 4 DESCRIPTION OF TESTS 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 CONDUCTED OUTPUT POWER EFFECTIVE (ISOTROPIC) RADIATED POWER OF TRANSMITTER OCCUPIED BANDWIDTH BAND EDGE AT ANTENNA TERMINALS SPURIOUS AND HARMONIC EMISSIONS AT ANTENNA TERMINAL PEAK-AVERAGE RATIO FIELD STRENGTH OF SPURIOUS RADIATION FREQUENCY STABILITY / TEMPERATURE VARIATION TEST SETUPS 4.9.1 Test Setup 1 2 5 5 5 6 6 7 9 10 10 10 10 11 16 16 16 17 17 17 17 19 19 19 20 21 21 22 22 23 25 25 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 4 of 31 4.9.2 Test Setup 2 4.9.3 Test Setup 3 4.9.4 Test Setup 4 4.10 TEST CONDITIONS 5 MAIN TEST INSTRUMENTS 6 MEASUREMENT UNCERTAINTY 7 PHOTOGRAPHS - EUT CONSTRUCTIONAL DETAILS 25 26 26 27 29 31 31 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 5 of 31 2 Test Summary 2.1 GSM850/ LTE BAND 5/26 (824-849 MHz) Requirements Test Result Verdict Test Item Effective
(Isotropic) Radiated Power Output Data Peak-Average Ratio Modulation Characteristics FCC Rule No. 2.1046, 22.913 ERP 7 W
---
Limit13 dB 2.1047 Digital modulation Section 1 of Appendix B Pass Section 2 of Appendix B Section 3 of Appendix B Section 4 of Appendix B Section 5 of Appendix B Pass Pass Pass Pass OBW: No limit. EBW: No limit.
-13 dBm/1%*EBW, in 1 MHz bands immediately outside and adjacent to the frequency block. FCC: -13 dBm/100 kHz, from 9 kHz to 10th harmonics but outside authorized operating frequency ranges. Section 6 of Appendix B Pass FCC: -13 dBm/100 kHz. 2.5ppm. Section 7 of Appendix B Section 8 of Appendix B Pass Pass NOTE: For the verdict, the N/A denotes not applicable, the N/T denotes not tested. 2.2 GSM1900/LTE BAND 2 (1850-1915 MHz) FCC Rule No. Requirements Test Result Verdict EIRP 2 W Limit13 dB Digital modulation OBW: No limit. EBW: No limit.
-13 dBm/1%*EBW, in 1 MHz bands immediately outside and adjacent to the frequency block. Section 1 of Appendix B Pass Section 2 of Appendix B Section 3 of Appendix B Section 4 of Appendix B Section 5 of Appendix B Pass Pass Pass Pass
-13 dBm/1 MHz, from 9 kHz to 10th harmonics but outside authorized operating frequency ranges. Section 6 of Appendix B Pass This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Bandwidth 2.1049 Band Edges Compliance Spurious Emission at Antenna Terminals Field Strength of Spurious Radiation Frequency Stability 2.1051, 22.917 2.1051, 22.917 2.1053, 22.917 2.1055, 22.355 Test Item Effective
(Isotropic) Radiated Power Output Data Peak-Average Ratio Modulation Characteristics 2.1046, 24.232 2.1046, 24.232 2.1047 Bandwidth 2.1049 Band Edges Compliance Spurious Emission at Antenna Terminals 2.1051, 24.238 2.1051, 24.238 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 6 of 31 Test Item FCC Rule No. Requirements Test Result Verdict Field Strength of Spurious Radiation Frequency Stability 2.1053, 24.238 2.1055, 24.235
-13 dBm/1 MHz. 2.5 ppm. Section 7 of Appendix B Section 8 of Appendix B Pass Pass NOTE: For the verdict, the N/A denotes not applicable, the N/T denotes not tested. 2.3 LTE BAND 4 (1710-1780 MHz) FCC Rule No. Requirements Test Result Verdict Test Item Effective
(Isotropic) Radiated Power Output Data Peak-Average Ratio Modulation Characteristics 2.1046, 27.50(d) 2.1046, 27.50(d) 2.1047 Bandwidth 2.1049 Band Edges Compliance Spurious Emission at Antenna Terminals Field Strength of Spurious Radiation Frequency Stability 2.1051, 27.53(h) 2.1051, 27.53(h) 2.1053, 27.53(h) 2.1055, 27.54 Test Item Effective
(Isotropic) Radiated Power Output Data Peak-Average Ratio Modulation Characteristics 2.1046, 27.50(c) 2.1047 Bandwidth 2.1049 Band Edges Compliance Spurious Emission at 2.1051, 27.53(g) 2.1051, 27.53(g) EIRP 1 W Limit13 dB Digital modulation OBW: No limit. EBW: No limit.
-13 dBm/1%*EBW, in 1 MHz bands immediately outside and adjacent to the frequency block. Section 1 of Appendix B Pass Section 2 of Appendix B Section 3 of Appendix B Section 4 of Appendix B Section 5 of Appendix B Pass Pass Pass Pass
-13 dBm/1 MHz, from 9 kHz to 10th harmonics but outside authorized operating frequency ranges. Section 6 of Appendix B Pass
-13 dBm/1 MHz. 2.5 ppm. Section 7 of Appendix B Section 8 of Appendix B Pass Pass NOTE: For the verdict, the N/A denotes not applicable, the N/T denotes not tested. 2.4 LTE BAND 12 (699-716MHz) FCC Rule No Requirements Test Result Verdict 27.50(c) FCC: ERP 3 W. Section 1 of Appendix B Pass Limit13 dB Digital modulation OBW: No limit. EBW: No limit.
-13 dBm/1%*EBW, in 1 MHz bands immediately outside and adjacent to the frequency block. Section 2 of Appendix B Section 3 of Appendix B Section 4 of Appendix B Section 5 of Appendix B FCC: -13 dBm/100 kHz, from 9 kHz to 10th harmonics but outside authorized operating Section 6 of Appendix B Pass Pass Pass Pass Pass This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Test Item Antenna Terminals Field Strength of Spurious Radiation Frequency Stability SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 7 of 31 FCC Rule No Requirements frequency ranges. Test Result Verdict 2.1053, 27.53(g) 2.1055, 27.54 FCC: -13 dBm/100 kHz. 2.5ppm. Section 7 of Appendix B Section 8 of Appendix B Pass Pass NOTE: For the verdict, the N/A denotes not applicable, the N/T denotes not tested. 2.5 LTE BAND 13 (777-787MHz) FCC Rule No. Requirements Test Result Verdict Test Item Effective
(Isotropic) Radiated Power Output Data Peak-Average Ratio Modulation Characteristics 2.1046, 27.50(b) 27.50 2.1047 Bandwidth 2.1049, Band Edges Compliance 2.1051, 27.53(c) Section 1 of Appendix B Pass Section 2 of Appendix B Section 3 of Appendix B Section 4 of Appendix B Section 5 of Appendix B N/T Pass Pass Pass FCC: ERP 3 W. Limit13 dB Digital modulation OBW: No limit. EBW: No limit.
-13 dBm/1%*EBW, in 1 MHz bands immediately outside and adjacent to the frequency block.
-13 dBm/100 kHz, from 9 kHz to 10th harmonics but outside authorized operating frequency ranges.
(c) For operations in the 746-758 MHz band and the 776-788 MHz band, the power of any emission outside the licensee's frequency band(s) of operation shall be attenuated below the transmitter power (P) within the licensed band(s) of operation, measured in watts, in accordance with the following:
Spurious Emission at Antenna Terminals 2.1051, 27.53(c) 27.53(f)
(1) On any frequency outside the 746-
758 MHz band, the power of any emission shall be attenuated outside the band below the transmitter power (P) by at least 43 + 10 Section 6 of Appendix B Pass log (P) dB;
(2) On any frequency outside the 776-
788 MHz band, the power of any emission shall be attenuated outside the band below the transmitter power (P) by at least 43 + 10 log (P) dB;
(3) On all frequencies between 763-
775 MHz and 793-805 MHz, by a factor not less than 76 + 10 log (P) dB in a 6.25 kHz band segment, for base and fixed stations;
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 8 of 31 Test Item FCC Rule No. Requirements Test Result Verdict
(4) On all frequencies between 763-775 MHz and 793-805 MHz, by a factor not less than 65 + 10 log (P) dB in a 6.25 kHz band segment, for mobile and portable stations;
For operations in the 746-758 MHz, 775-
788 MHz, and 805-806 MHz bands, emissions in the band 1559-1610 MHz shall be limited to 70 dBW/MHz equivalent isotropically radiated power (EIRP) for wideband signals, and 80 dBW EIRP for discrete emissions of less than 700 Hz bandwidth. FCC: -13 dBm/100 kHz.
(c) For operations in the 746-758 MHz band and the 776-788 MHz band, the power of any emission outside the licensee's frequency band(s) of operation shall be attenuated below the transmitter power (P) within the licensed band(s) of operation, measured in watts, in accordance with the following:
(1) On any frequency outside the 746-
758 MHz band, the power of any emission shall be attenuated outside the band below the transmitter power (P) by at least 43 + 10 log (P) dB;
(2) On any frequency outside the 776-
788 MHz band, the power of any emission shall be attenuated outside the band below the transmitter power (P) by at least 43 + 10 log (P) dB;
(3) On all frequencies between 763-
775 MHz and 793-805 MHz, by a factor not less than 76 + 10 log (P) dB in a 6.25 kHz band segment, for base and fixed stations;
(4) On all frequencies between 763-775 MHz and 793-805 MHz, by a factor not less than 65 + 10 log (P) dB in a 6.25 kHz band segment, for mobile and portable stations;
For operations in the 746-758 MHz, 775-
788 MHz, and 805-806 MHz bands, emissions in the band 1559-1610 MHz shall be limited to 70 dBW/MHz equivalent isotropically radiated power (EIRP) for wideband signals, and 80 dBW EIRP for discrete emissions of less than 700 Hz bandwidth. Section 7 of Appendix B Pass Field Strength of Spurious Radiation 2.1053, 27.53(c) 27.53(f) Frequency Stability 2.1055, 27.54 Within authorized bands of operation/frequency block. Section 8 of Appendix B Pass NOTE: For the verdict, the N/A denotes not applicable, the N/T denotes not tested. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 9 of 31 2.6 LTE BAND 26 (814-824 MHz) Requirements Test Result Verdict Test Item Transmitter Conducted Power Output Peak-Average Ratio Modulation Characteristics FCC Rule No. 2.1046, 90.635
< 100 W.
---
FCC: Limit13 dB 2.1047 Digital modulation Bandwidth 2.1049 OBW: No limit. EBW: No limit. Emission Mask 2.1051 90.210 For any frequency removed from the EA licensees frequency block by up to and including 37.5 kHz, the power of any emission shall be attenuated below the transmitter power (P) in watts by at least 116 Log10(f/6.1) decibels or 50+10Log10(P) decibels or 80 decibels, whichever is the lesser attenuation, where f is the frequency removed from the center of the outer channel in the block in kilohertz and where f is greater than 12.5 kHz. Section 1 of Appendix B Section 2 of Appendix B Section 3 of Appendix B Section 4 of Appendix B PASS N/T PASS PASS Section 5 of Appendix B PASS emissions 2.1051, 90.691
< 43 + 10Log10(P[Watts]) for all out-of-band Spurious Emission at Antenna Terminals Field Strength of Spurious Radiation Frequency Stability NOTE: For the verdict, the N/A denotes not applicable, the N/T denotes not tested. Note LTE BAND 26 (814-849MHz) overlaps the entire frequency range of LTE BAND 5 (824-849MHz), therefore, test data provided in this report covers BAND 5 as well as BAND 26 subject to Part 22.
< 43 + 10Log10(P[Watts]) for all out-of-band Section 8 of Appendix B Section 6 of Appendix B Section 7 of Appendix B 2.1055, 90.213 2.1053, 90.691
< 2.5ppm. emissions PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 10 of 31 3 General Information 3.1 Client Information Applicant:
Fibocom Wireless Inc. Address of Applicant:
5/F, Tower A, Technology Building II, 1057 Nanhai Avenue, Shenzhen, China Manufacturer:
Fibocom Wireless Inc. Address of Manufacturer: 5/F, Tower A, Technology Building II, 1057 Nanhai Avenue, Shenzhen, China Factory:
Shenzhen Eternity Technology Co., Ltd Address of Factory:
1F, 2F, 4F Building A2, Yingzhan Industrial Zone, Longtian Community, Longtian Road, Pingshan District, Shenzhen, Guangdong Province, P.R. China 3.2 General Description of EUT Product Name:
LTE (CatM1,NB-IOT) Module Model No.:
Trade Mark:
Sample Type:
Antenna Type:
3.3 Test Mode Test Mode M910-GL Fibocom LTE (CatM1,NB-IOT) Module PIFA Test Modes Description GSM/TM1 GSM system, GPRS, GMSK modulation GSM/TM2 GSM system, EGPRS, 8PSK modulation LTE-M1 LTE-NB1 LTE/TM1 LTE system, QPSK modulation LTE system, BPSK modulation LTE/TM2 LTE system, QPSK modulation NOTE: The test mode(s) are selected according to relevant radio technology specifications. LTE system, 16QAM modulation This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 11 of 31 3.4 Frequency List of Low/Middle/High Channels Test Mode TX / RX GSM850 TX RX Test Mode TX / RX GSM1900 TX RX RF Channel Low (L) Middle (M) High (H) Channel 128 Channel 190 Channel 251 824.2MHz 836.6 MHz 848.8 MHz Channel 128 Channel 190 Channel 251 869.2 MHz 881.6 MHz 893.8 MHz RF Channel Low (L) Middle (M) High (H) Channel 512 Channel 661 Channel 810 1850.2MHz 1880.0 MHz 1909.8 MHz Channel 512 Channel 661 Channel 810 1930.2 MHz 1960.0 MHz 1989.8 MHz Channel/Frequency(MHz) Channel Frequency Channel/Frequency(MHz) Channel Frequency Channel/Frequency(MHz) Channel Frequency Channel/Frequency(MHz) Channel Frequency Channel/Frequency(MHz) Channel Frequency LTE-NB1 BAND 2 Channel and Frequency List Lowest 18601 1850.1 Middle 18900 1880 LTE-NB1 BAND 4 Channel and Frequency List Lowest 19951 1710.1 Middle 20175 1732.5 LTE-NB1 BAND 5 Channel and Frequency List Lowest 20401 824.1 Middle 20525 836.5 LTE-NB1 BAND 12 Channel and Frequency List Lowest 23011 699.1 Middle 23095 707.5 LTE-NB1 BAND 13 Channel and Frequency List Lowest 23181 777.1 Middle 23230 782 LTE-NB1 BAND 26(814-824) Channel and Frequency List Channel/Frequency(MHz) Channel Frequency Lowest 26691 814.1 Middle 26740 819 Highest 19199 1909.9 Highest 20399 1754.9 Highest 20649 848.9 Highest 23179 715.9 Highest 23279 786.9 Highest 26789 823.9 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 12 of 31 LTE-NB1 BAND 26(824-849) Channel and Frequency List Channel/Frequency(MHz) Channel Frequency Lowest 26791 824.1 Test Mode Bandwidth TX / RX LTE BAND 2 1.4MHz 3MHz 5MHz 10MHz 15MHz 20MHz TX RX TX RX TX RX TX RX TX RX TX RX Middle 26925 836.5 Highest 27039 848.9 RF Channel Low (L) Middle (M) High (H) Channel 18607 Channel 18900 Channel 19193 1850.7 MHz 1880 MHz 1909.3 MHz Channel 607 Channel 900 Channel 1193 1930.7 MHz 1960 MHz 1989.3 MHz Channel 18615 Channel 18900 Channel 19185 1851.5 MHz 1880 MHz 1908.5 MHz Channel 615 Channel 900 Channel 1185 1931.5 MHz 1960 MHz 1988.5 MHz Channel 18625 Channel 18900 Channel 19175 1852.5 MHz 1880 MHz 1907.5 MHz Channel 625 Channel 900 Channel1175 1932.5 MHz 1960 MHz 1987.5 MHz Channel 18650 Channel 18900 Channel 19150 1855 MHz 1880 MHz 1905 MHz Channel 650 Channel 900 Channel 1150 1935 MHz 1960 MHz 1985 MHz Channel 18675 Channel 18900 Channel 19125 1857.5 MHz 1880 MHz 1902.5 MHz Channel 675 Channel 900 Channel 1125 1937.5 MHz 1960 MHz 1982.5 MHz Channel 18700 Channel 18900 Channel 19100 1860 MHz 1880 MHz 1900 MHz Channel 700 Channel 900 Channel 1100 1940 MHz 1960 MHz 1980 MHz Test Mode Bandwidth TX / RX RF Channel Low (L) Middle (M) High (H) LTE BAND 4 1.4MHz 3MHz TX RX TX RX Channel 19957 Channel 20175 Channel 20393 1710.7 MHz 1732.5 MHz 1754.3 MHz Channel 1975 Channel 2175 Channel 2375 2112.5 MHz 2132.5MHz 2152.5 MHz Channel 19965 Channel 20175 Channel 20385 1711.5 MHz 1732.5 MHz 1753.5 MHz Channel 2000 Channel 2175 Channel 2350 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 13 of 31 5MHz 10MHz 15MHz 20MHz TX RX TX RX TX RX TX RX Test Mode Bandwidth TX / RX LTE BAND 5 1.4MHz 3MHz 5MHz 10MHz TX RX TX RX TX RX TX RX 2115 MHz 2132.5MHz 2150 MHz Channel 19975 Channel 20175 Channel 20375 1712.5 MHz 1732.5 MHz 1752.5 MHz Channel 1975 Channel 2175 Channel 2375 2112.5 MHz 2132.5MHz 2152.5 MHz Channel 20000 Channel 20175 Channel 20350 1715 MHz 1732.5 MHz 1750 MHz Channel 2000 Channel 2175 Channel 2350 2115 MHz 2132.5MHz 2150 MHz Channel 20025 Channel 20175 Channel 20325 1717.5 MHz 1732.5 MHz 1747.5 MHz Channel 2025 Channel 2175 Channel 2325 2117.5 MHz 2132.5MHz 2147.5 MHz Channel 20050 Channel 20175 Channel 20300 1720 MHz 1732.5 MHz 1745 MHz Channel 2050 Channel 2175 Channel 2300 2120 MHz 2132.5MHz 2145 MHz RF Channel Low (L) Middle (M) High (H) Channel 20407 Channel 20525 Channel 20643 824.7 MHz 836.5 MHz 848.3 MHz Channel 2407 Channel 2525 Channel 2643 869.7 MHz 881.5 MHz 893.3 MHz Channel 20415 Channel 20525 Channel 20635 825.5 MHz 836.5 MHz 847.5 MHz Channel 2415 Channel 2525 Channel 2635 870.5 MHz 881.5 MHz 892.5 MHz Channel 20425 Channel 20525 Channel 20625 826.5 MHz 836.5 MHz 846.5 MHz Channel 2425 Channel 2525 Channel 2625 871.5 MHz 881.5 MHz 891.5 MHz Channel 20450 Channel 20525 Channel 20600 829 MHz 836.5 MHz 844 MHz Channel 2450 Channel 2525 Channel 2600 874 MHz 881.5 MHz 889 MHz Test Mode Bandwidth TX / RX RF Channel This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 14 of 31 LTE BAND12 1.4MHz 3MHz 5MHz 10MHz TX RX TX RX TX RX TX RX Test Mode Bandwidth TX / RX LTE BAND 13 5MHz 10MHz TX RX TX RX Test Mode Bandwidth TX / RX LTE BAND26
(814-824) 1.4MHz 3MHz TX RX TX RX Low (L) Middle (M) High (H) Channel 23017 Channel 23095 Channel 23173 699.7 MHz 707.5 MHz 715.3 MHz Channel 5017 Channel 5095 Channel 5173 729.7 MHz 737.5 MHz 745.3 MHz Channel 23025 Channel 23095 Channel 23165 700.5 MHz 707.5 MHz 714.5 MHz Channel 5025 Channel 5095 Channel 5165 730.5 MHz 737.5 MHz 744.5 MHz Channel 23035 Channel 23095 Channel 23155 701.5 MHz 707.5 MHz 713.5 MHz Channel 5035 Channel 5095 Channel 5155 731.5 MHz 737.5 MHz 743.5 MHz Channel 23060 Channel 23095 Channel 23130 704 MHz 707.5 MHz 711 MHz Channel 5060 Channel 5095 Channel 5130 734 MHz 737.5 MHz 741 MHz RF Channel Low (L) Middle (M) High (H) Channel 23025 Channel 23230 Channel 23255 779.5 MHz 782 MHz 784.5 MHz Channel 5205 Channel 5230 Channel 5255 748.5 MHz 751 MHz 753.5 MHz Channel 23230 Channel 23230 Channel 23230 782 MHz 782 MHz 782 MHz Channel 5230 Channel 5230 Channel 5230 751 MHz 751 MHz 751 MHz RF Channel Low (L) Middle (M) High (H) Channel 26697 Channel 26740 Channel 26783 814.7 MHz 819 MHz 823.3 MHz Channel 8697 Channel 8740 Channel 8783 859.7 MHz 864MHz 868.3 MHz Channel 26705 Channel 26740 Channel 26775 815.5 MHz 819 MHz 822.5 MHz Channel 8705 Channel 8740 Channel 8775 860.5 MHz 864MHz 867.5 MHz 5MHz TX Channel 26715 Channel 26740 Channel 26765 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 15 of 31 816.5 MHz 819 MHz 821.5 MHz Channel 8715 Channel 8740 Channel 8755 861.5 MHz 864MHz 866.5 MHz Channel 26740 Channel 26740 Channel 26740 819 MHz 819 MHz 819 MHz Channel 8740 Channel 8740 Channel 8740 864MHz 864MHz 864MHz RX TX RX 10MHz Test Mode Bandwidth TX / RX 1.4MHz 3MHz LTE BAND26
(824-849) 5MHz 10MHz 15MHz TX RX TX RX TX RX TX RX TX RX RF Channel Low (L) Middle (M) High (H) Channel 26797 Channel 26915 Channel 27033 824.7 MHz 836.5 MHz 848.3 MHz Channel 8697 Channel 8915 Channel 9033 859.7 MHz 881.5 MHz 893.3 MHz Channel 26805 Channel 26915 Channel 27025 825.5 MHz 836.5 MHz 847.5 MHz Channel 8805 Channel 8915 Channel 9025 860.5 MHz 881.5 MHz 892.5 MHz Channel 26815 Channel 26915 Channel 27015 826.5 MHz 836.5 MHz 846.5 MHz Channel 8815 Channel 8915 Channel 9015 871.5 MHz 881.5 MHz 891.5 MHz Channel 26840 Channel 26915 Channel 26990 829 MHz 836.5 MHz 844 MHz Channel 8840 Channel 8915 Channel 8990 874 MHz 881.5 MHz 889 MHz Channel 26865 Channel 26915 Channel 26965 831.5 MHz 836.5 MHz 841.5 MHz Channel 8865 Channel 8915 Channel 8965 876.5 MHz 881.5 MHz 886.5 MHz This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 16 of 31 3.5 Test Environment Environment Parameter Relative Humidity Atmospheric Pressure:
Temperature Voltage:
Selected Values During Tests 52%
101.32 KPa NT LV NV HV 25 C 3.3V 3.8V 4.3V NOTE: LV= lower extreme test voltage; NV= nominal voltage HV= upper extreme test voltage; NT= normal temperature 3.6 Test Location All tests were performed at:
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 3.7 Test Facility The test facility is recognized, certified, or accredited by the following organizations:
CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. FCC Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. Industry Canada (IC) This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 17 of 31 Two 3m Semi-anechoic chambers and the 10m Semi-anechoic chamber of SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab have been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 4620C-1, 4620C-2, 4620C-3. 3.8 Deviation from Standards None. 3.9 Abnormalities from Standard Conditions None. 3.10Other Information Requested by the Customer None. 3.11 Technical Specification Characteristics Description Radio System Type GSM LTE GSM850 GSM1900 LTE BAND 2 LTE BAND 4 Supported Frequency Range LTE BAND 5 LTE BAND 12 LTE BAND 13 LTE BAND 26
(814 to 824 MHz ) LTE BAND 26
(824 to 849 MHz ) GSM850:32.5 dBm GSM1900: 30dBm Target TX Output Power Transmission (TX):824 to 849 MHz Receiving (RX):869 to 894 MHz Transmission (TX):1850 to 1910 MHz Receiving (RX): 1930 to 1990 MHz Transmission (TX):1850 to 1910 MHz Receiving (RX):1930 to 1990 MHz Transmission (TX):1710 to 1755 MHz Receiving (RX): 2110 to 2155 MHz Transmission (TX): 824 to 849 MHz Receiving (RX): 869 to 894 MHz Transmission (TX):699 to 716 MHz Receiving (RX): 729 to 746 MHz Transmission (TX):777 to 787 MHz Receiving (RX): 746 to 756 MHz Transmission (TX): 814 to 824MHz Receiving (RX): 859 to 869 MHz Transmission (TX):824 to 849 MHz Receiving (RX):869 to 894 MHz This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 18 of 31 LTE -M1 BAND 2: 24dBm LTE -M1 BAND 4: 24dBm LTE -M1 BAND 5: 24dBm LTE -M1 BAND 12: 24dBm LTE -M1 BAND 13: 24dBm LTE -M1 BAND 26: 24dBm LTE -NB1 BAND 2: 23.5dBm LTE -NB1 BAND 4: 23.5dBm LTE -NB1 BAND 5: 23.5dBm LTE -NB1 BAND 12: 23.5dBm LTE -NB1 BAND 13: 23.5dBm LTE -NB1 BAND 26: 23.5dBm GSM System:
0.2 MHz LTE-M1 Supported Channel Bandwidth LTE BAND 2 LTE BAND 4 LTE BAND 5 LTE BAND 12 LTE BAND 13 LTE BAND 26
(814-824) LTE BAND 26
(824-849) LTE BAND 2 LTE BAND 4 LTE BAND 5 5 MHz;
10 MHz;
15 MHz, 20 MHz 1.4 MHz;
3 MHz;
5 MHz;
10 MHz;
15 MHz, 20 MHz 1.4 MHz;
3 MHz;
5 MHz;
10 MHz 1.4 MHz;
3 MHz;
5 MHz;
10 MHz 5 MHz;
10 MHz 1.4 MHz;
3 MHz;
5 MHz;
10 MHz;
1.4 MHz;
3 MHz;
5 MHz;
10 MHz;
15 MHz Subcarrier:
3.75KHz MHz;
15 KHz Subcarrier:
3.75KHz MHz;
15 KHz Subcarrier:
3.75KHz MHz;
15 KHz LTE BAND 12 Subcarrier:
3.75KHz MHz;
15 KHz LTE-NB1 LTE BAND 13 Subcarrier:
3.75KHz MHz;
15 KHz LTE BAND 26
(814-824) LTE BAND 26
(824-849) Subcarrier:
3.75KHz MHz;
15 KHz Subcarrier:
3.75KHz MHz;
15 KHz Characteristics Description Designation of Emissions GSM850 GSM1900
(Note: the necessary bandwidth of which is the worst value from the measured occupied LTE M1 BAND 2 LTE-M1 LTE M1 BAND 4 246KGXW; 246KG7W 246KGXW; 245KG7W 1M11G7D;1M13W7D;
1M11G7D;1M12W7D;
LTE M1 BAND 12 1M11G7D;1M11W7D;
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. bandwidths for each type of channel bandwidth configuration.) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 19 of 31 LTE M1 BAND13 1M10G7D;1M11W7D;
LTE M1 BAND 26814-824 1M10G7D;1M11W7D LTE M1 BAND 5 LTE M1 BAND 26824-849 1M12G7D;1M11W7D;
LTE NB1 BAND 2 LTE NB1 BAND 4 LTE NB1 BAND 12 LTE-NB1 LTE NB1 BAND13 186KG7D 185KG7D 187KG7D 186KG7D LTE NB1 BAND 26814-824 185KG7D LTE NB1 BAND 5 LTE NB1 BAND 26824-849 185KG7D 4 Description of Tests 4.1 Conducted Output Power Measurement Procedure: FCC KDB 971168 D01 V03r01 The transmitter output was connected to a calibrated coaxial cable, attenuator and power meter, the other end of which was connected to a Base Station Simulator. The Base Station Simulator was set to force the EUT to its maximum power setting. The power output at the transmitter antenna port was determined by adding the value of the cable insertion loss to the power reading. The tests were performed at three frequencies (low channel, middle channel and high channel) and on the highest power levels, which can be setup on the transmitters. Note: Reference test setup 1 4.2 Effective (Isotropic) Radiated Power of Transmitter Measurement Procedure: FCC KDB 971168 D01 V03r01 ; ANSI/TIA-603-E-2016-Section 2.2.17 Below 1GHz test procedure as below:
1). The EUT was powered ON and placed on a 0.8m high table in the chamber. The antenna of the transmitter was extended to its maximum length. 2). The disturbance of the transmitter was maximized on the test receiver display by raising and lowering from 1m to 4m the receive antenna and by rotating through 360 the turntable. After the fundamental emission was maximized, a field strength measurement was made. 3). Steps 1) and 2) were performed with the EUT and the receive antenna in both vertical and horizontal polarization. 4). The transmitter was then removed and replaced with another antenna. The center of the antenna was approximately at the same location as the center of the transmitter. 5). A signal at the disturbance was fed to the substitution antenna by means of a non-radiating cable. With both the substitution and the receive antennas horizontally polarized, the receive antenna was raised and lowered to obtain a maximum reading at the test receiver. The level of the signal generator was adjusted until the measured field strength level in step 2) is obtained for this set of conditions. 6). The output power into the substitution antenna was then measured. 7). Steps 5) and 6) were repeated with both antennas polarized. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 20 of 31 8). Calculate power in dBm by the following formula:
ERP (dBm) = Pg(dBm) cable loss (dB) + antenna gain (dBd) Where:
Pg is the generator output power into the substitution antenna. Above 1GHz test procedure as below:
1). Different between above is the test site, change from Semi- Anechoic Chamber to fully Anechoic Chamber 2). Calculate power in dBm by the following formula:
EIRP(dBm) = Pg(dBm) cable loss (dB) + antenna gain (dBi) EIRP=ERP+2.15dB Where:
Pg is the generator output power into the substitution antenna. 3). Test the EUT in the lowest channel, the middle channel the Highest channel 4). The radiation measurements are performed in X, Y, Z axis positioning. And found the X axis positioning which it is worse case, Only the test worst case mode is recorded in the report. 5). Repeat above procedures until all frequencies measured was complete. Note: Reference test setup 2 4.3 Occupied Bandwidth Measurement Procedure: FCC KDB 971168 D01 V03r01 Section 4.2 The occupied bandwidth, that is the frequency bandwidth such that, below its lower and above its upper frequency limits, the mean powers radiated are each equal to 0.5 percent of the total mean power radiated by a given emission shall be measured. The transmitter output was connected to a calibrated coaxial cable, attenuator and Spectrum analyser, the other end of which was connected to a Base Station Simulator. The Base Station Simulator was set to force the EUT to its maximum power setting. The tests were performed at three frequencies (low channel, middle channel and high channel).The span of the analyzer shall be set to capture all products of the modulation process, including the emission skirts. The resolution bandwidth shall be set to as close to 1 percent of the selected span as is possible without being below 1 percent. The video bandwidth shall be set to 3 times the resolution bandwidth. Video averaging is not permitted. Where practical, a sampling detector shall be used since a peak or, peak hold, may produce a wider bandwidth than actual. The trace data points are recovered and are directly summed in linear terms. The recovered amplitude data points, beginning at the lowest frequency, are placed in a running sum until 0.5 percent of the total is reached and that frequency recorded. The process is repeated for the highest frequency data points. This frequency is recorded. The span between the two recorded frequencies is the occupied bandwidth. Note: Reference test setup 1 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 21 of 31 4.4 Band Edge at Antenna Terminals Measurement Procedure: FCC KDB 971168 D01 V03r01 Section 6.0 The transmitter output was connected to a calibrated coaxial cable, attenuator and Spectrum analyser, the other end of which was connected to a Base Station Simulator. The Base Station Simulator was set to force the EUT to its maximum power setting. The tests were performed at three frequencies (low channel and high channel).in the 1MHz bands immediately outside and adjacent to the frequency block a resolution bandwidth of 100kHz or 1% of the emission bandwidth of the fundamental emission of the transmitter may be employed. The EUT emission bandwidth is measured as the width of the signal between two points, outside of which all emission are attenuated at least 26dB below the transmitter power. The video bandwidth of the spectrum analyzer was set at thrice the resolution bandwidth. Detector Mode was set to peak or peak hold power. Note: Reference test setup 1 4.5 Spurious And Harmonic Emissions at Antenna Terminal Measurement Procedure: FCC KDB 971168 D01 V03r01 The transmitter output was connected to a calibrated coaxial cable, attenuator and Spectrum analyzer, the other end of which was connected to a Base Station Simulator. The Base Station Simulator was set to force the EUT to its maximum power setting. The tests were performed at three frequencies (low channel and high channel).The level of the carrier and the various conducted spurious and harmonic frequencies is This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 22 of 31 measured by means of a calibrated spectrum analyzer. The spectrum is scanned from the lowest frequency generated in the equipment up to a frequency including its 10th harmonic. On any frequency outside a licensees frequency block, the power of any emission shall be attenuated below the transmitter power (P) by at least 43 + 10 log(P) dB. Compliance with these provisions is based on the use of measurement instrumentation employing a resolution bandwidth of 1 MHz or greater. However, in the 1 MHz bands immediately outside and adjacent to the frequency block a resolution bandwidth of at least one percent of the emission bandwidth of the fundamental emission of the transmitter may be employed. The emission bandwidth is defined as the width of the signal between two points, one below the carrier center frequency and one above the carrier center frequency, outside of which all emission are attenuated at least 26 dB below the transmitter power. Note: Reference test setup 1 4.6 Peak-Average Ratio Measurement Procedure: FCC KDB 971168 D01 V03r01 Section 5.7.1 A peak to average ratio measurement is performed at the conducted port of the EUT. For WCDMA signals, the spectrum analyzers Complementary Cumulative Distribution Function (CCDF) measurement profile is used to determine the largest deviation between the average and the peak power of the EUT in a given bandwidth. The CCDF curve shows how much time the peak waveform spends at or above a given average power level. The percent of time the signal spends at or above the level defines the probability for that particular power level. For GSM signals, an average and a peak trace are used on a spectrum analyzer to determine the largest deviation between the average and the peak power of the EUT in a bandwidth greater than the emission bandwidth. The traces are generated with the spectrum analyzer set to zero span mode. Note: Reference test setup 1 4.7 Field Strength of Spurious Radiation Measurement Procedure: FCC KDB 971168 D01 V03r01 Below 1GHz test procedure as below:
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 23 of 31 1). The EUT was powered ON and placed on a 150cm high table in the chamber. The antenna of the transmitter was extended to its maximum length. 2). The disturbance of the transmitter was maximized on the test receiver display by raising and lowering from 1m to 4m (for the test frequency of below 30MHz, the antenna was tuned to heights 1 meter) the receive antenna and by rotating through 360 the turntable. After the fundamental emission was maximized, a field strength measurement was made. 3). Steps 1) and 2) were performed with the EUT and the receive antenna in both vertical and horizontal polarization. 4). The transmitter was then removed and replaced with another antenna. The center of the antenna was approximately at the same location as the center of the transmitter. 5). A signal at the disturbance was fed to the substitution antenna by means of a non-radiating cable. With both the substitution and the receive antennas horizontally polarized, the receive antenna was raised and lowered to obtain a maximum reading at the test receiver. The level of the signal generator was adjusted until the measured field strength level in step 2) is obtained for this set of conditions. 6). The output power into the substitution antenna was then measured. 7). Steps 5) and 6) were repeated with both antennas polarized. 8) Calculate power in dBm by the following formula:
ERP(dBm) = Pg(dBm) cable loss (dB) + antenna gain (dBd) Where:
Pd is the dipole equivalent power, Pg is the generator output into the substitution antenna, and the antenna gain is the gain of the substitute antenna used relative to either a half-wave dipole (dBd) or an isotropic source (dBi). The substitute level is equal to Pg [dBm] cable loss [dB]. The calculated Pd levels are then compared to the absolute spurious emission limit of -13dBm which is equivalent to the required minimum attenuation of 43 + 10log10(Power [Watts]). Above 1GHz test procedure as below:
1) Different between above is the test site, change from Semi- Anechoic Chamber to fully Anechoic Chamber 2) Calculate power in dBm by the following formula:
EIRP(dBm) = Pg(dBm) cable loss (dB) + antenna gain (dBi) EIRP=ERP+2.15dB Where:
Pg is the generator output power into the substitution antenna. 3. Test the EUT in the lowest channel, the middle channel the Highest channel 4. The radiation measurements are performed in X, Y, Z axis positioning. And found the X axis positioning which it is worse case, Only the test worst case mode is recorded in the report. 5. Repeat above procedures until all frequencies measured was complete Note: Reference test setup 3 4.8 Frequency Stability / Temperature Variation Measurement Procedure:
Frequency stability testing is performed in accordance with the guidelines of FCC KDB 971168 D01 V03r01;
ANSI/TIA-603-E-2016
. The frequency stability of the transmitter is measured by:
a.) Temperature: The temperature is varied from -30C to +50C in 10C increments using an environmental chamber. b.) Primary Supply Voltage: The primary supply voltage is varied from 85% to 115% of the nominal value for non hand-carried battery and AC powered equipment. For hand-carried, battery-powered equipment, This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 24 of 31 primary supply voltage is reduced to the battery operating end point which shall be specified by the manufacturer. Specification The frequency stability shall be sufficient to ensure that the fundamental emission stays within the authorized frequency block. The frequency stability of the transmitter shall be maintained within 0.00025% (2.5 ppm ) of the center frequency. Time Period and Procedure:
1. The carrier frequency of the transmitter is measured at room temperature (20C to provide a reference). 2. The equipment is turned on in a standby condition for fifteen minutes before applying power to the transmitter. Measurement of the carrier frequency of the transmitter is made within one minute after applying power to the transmitter. 3. Frequency measurements are made at 10C intervals ranging from -30C to +50C. A period of at least one half-hour is provided to allow stabilization of the equipment at each temperature level. Note: Reference test setup 4 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 4.9 Test Setups 4.9.1 Test Setup 1 4.9.2 Test Setup 2 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 25 of 31 Figure 1. 30MHz to 1GHz Figure 2. above 1GHz This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 4.9.3 Test Setup 3 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 26 of 31 Figure 1. Below 30MHz Figure 2. 30MHz to 1GHz Figure 3. above 1GHz 4.9.4 Test Setup 4 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 27 of 31 4.10 Test Conditions Test Case Test Conditions Transmit Output Power Data Average Power, Total Average Power, Spectral Density (if required) Test Environment Ambient Climate & Rated Voltage Test Setup Test Setup 1 Channels RF
(TX) L, M, H (L= low channel, M= middle channel, H= high channel ) Test Mode Test Environment GSM/TM1;GSM/TM2; LTE/TM1;LTE/TM2 Ambient Climate & Rated Voltage Test Setup Test Setup 1 Channels RF
(TX) L, M, H (L= low channel, M= middle channel, H= high channel ) Test Mode Test Environment GSM/TM1;GSM/TM2; LTE/TM1;LTE/TM2 Ambient Climate & Rated Voltage Peak-to-Average Ratio Test Setup Test Setup 1
(if required) Channels RF
(TX) L, M, H (L= low channel, M= middle channel, H= high channel ) Test Mode Test Environment GSM/TM1;GSM/TM2;LTE/TM1;LTE/TM2 Ambient Climate & Rated Voltage Test Setup Test Setup 1 Channels RF
(TX) Test Mode Test Environment M (M= middle channel ) GSM/TM1;GSM/TM2; LTE/TM1;LTE/TM2 Ambient Climate & Rated Voltage Test Setup Test Setup 1 Channels RF
(TX) L, M, H (L= low channel, M= middle channel, H= high channel ) Test Mode Test Environment GSM/TM1;GSM/TM2; LTE/TM1;LTE/TM2 Ambient Climate & Rated Voltage Test Setup Test Setup 1 Modulation Characteristics Bandwidth Occupied Bandwidth Emission Bandwidth
(if required) RF
(TX) Channels L, M, H (L= low channel, M= middle channel, H= high channel ) Band Edges Compliance Test Mode Test Environment GSM/TM1;GSM/TM2; LTE/TM1;LTE/TM2 Ambient Climate & Rated Voltage This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Spurious Emission at Antenna Terminals SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 28 of 31 Test Setup Test Setup 1 Channels RF
(TX) Test Mode Test Environment L, H (L= low channel, H= high channel ) GSM/TM1;GSM/TM2; LTE/TM1;LTE/TM2 Ambient Climate & Rated Voltage Test Setup Test Setup 1 RF
(TX) Channels L,M, H
(L= low channel, M= middle channel, H= high channel ) Test Mode GSM/TM1;UMTS/TM1; LTE/TM1 Test Environment Ambient Climate & Rated Voltage Test Setup Test Setup 2 Field Strength of Spurious Radiation Test Mode GSM/TM1;GSM/TM2; LTE/TM1;LTE/TM2;
NOTE: If applicable, the EUT conf. that has maximum power density (based on the equivalent power level) is selected. Channels RF
(TX) L, M, H (L= low channel, M= middle channel, H= high channel ) Test Environment
(1) -30 C to +50 C with step 10 C at Rated Voltage;
(2) VL, VN and VH of Rated Voltage at Ambient Climate. Test Setup Test Setup 4 Channels RF
(TX) L, M, H (L= low channel, M= middle channel, H= high channel ) Test Mode GSM/TM1;GSM/TM2; LTE/TM1;LTE/TM2 Frequency Stability This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 29 of 31 5 Main Test Instruments RE in Chamber Item Test Equipment Manufacturer Model No. Inventory No. Cal. date
(yyyy/mm/dd) Cal.Due date
(yyyy/mm/dd) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 3m Semi-Anechoic Chamber 3m Semi-Anechoic Chamber EMI Test Receiver ETS-LINDGREN N/A SEM001-01 2018/03/13 2021/03/12 AUDIX Agilent Technologies N/A SEM001-02 2018/03/13 2021/03/12 N9038A SEM004-05 2017/10/09 2018/10/09 EXA Signal Agilent Analyzer (10Hz-
Technologies N9010A SEM004-09 2018/04/13 2019/04/12 26.5GHz) Inc BiConiLog Antenna
(26-3000MHz) Double-ridged horn
(1-18GHz) Horn Antenna (18-
26GHz) Horn Antenna
(15GHz-40GHz) ETS-LINDGREN 3142C SEM003-02 201711/15 2020/11/15 ETS-LINDGREN 3117 SEM003-11 2015/10/17 2018/10/17 ETS-LINDGREN 3160 SEM003-12 2017/11/24 2020/11/24 Schwarzbeck BBHA 9170 SEM003-15 2017/10/17 2020/10/17 Low Noise Amplifier Black Diamond
(100MHz-18GHz) Series Band filter Pre-amplifier (0.1-
N/A Agilent 1300MHz) Technologies BDLNA-
0118-
352810 N/A SEM005-05 2017/09/27 2018/09/26 N/A N/A N/A 8447D SEM005-01 2018/03/13 2019/03/12 Pre-Amplifier (0.1-
26.5GHz) Pre-amplifier
(26GHz-40GHz) Band filter Universal radio communication tester Universal radio communication tester Compliance Directions Systems Inc. Compliance Directions Systems Inc. Amindeon PAP-0126 SEM004-10 2017/10/17 2018/10/17 PAP-2640-
50 SEM005-08 2018/03/14 2019/03/14 82346 SEM023-01 N/A N/A Rohde &Schwarz CMU200 SEM010-01 2017/10/09 2018/10/09 Rohde &Schwarz CMW500 SEM010-03 2017/10/23 2018/10/23 DC Power Supply Zhao Xin RXN-305D SEM011-02 2017/10/09 2018/10/09 BiConiLog Antenna Schwarzbeck VULB9163 SEM003-05 2015/10/17 2018/10/17 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 30 of 31
(30MHz-3GHz) Horn Antenna
(800MHz-18GHz) 19 Rohde &Schwarz HF907 SEM003-06 2018/06/06 2021/06/06 RE in Chamber Item Test Equipment Manufacturer Model No. Inventory No. Cal. Date (yyyy-
mm-dd) Cal. Due date
(yyyy-mm-dd) 1 2 3 4 5 10m Semi-Anechoic Chamber EMI Test Receiver
(9k-7GHz) Trilog-Broadband Antenna(30M-1GHz) SAEMC FSAC1018 SEM001-03 2018/3/10 2019/3/9 Rohde & Schwarz ESR SEM004-03 2018/02/14 2019/02/14 Schwarzbeck VULB9168 SEM003-18 2016/06/29 2019/06/29 Pre-amplifier Sonoma Instrument Co 310N SEM005-03 2018/6/6 2019/6/5
.Loop Antenna ETS-Lindgren 6502 SEM003-08 2015/08/14 2018/08/14 RF connected test Item Test Equipment Manufacturer Model No. Inventory Cal. date Cal.Due date No.
(yyyy-mm-dd)
(yyyy-mm-dd) 1 2 3 4 5 6 7 8 9 Humi/ Temp Indicator MingGao TH101B W006-09 2018/03/13 2019/03/12 Signal Analyzer Spectrum Analyzer
(20Hz-43GHz) Rohde Schwarz Rohde &
Schwarz FSV W005-02 2018/03/13 2019/03/12 FSU43 SEM004-08 2018/04/14 2019/04/13 Barometer ChangChun DYM3 SEL0088 2018/05/24 2019/05/24 Dual Output Mobile Communication DC Source Digital Multimeter Wideband Radio Communication Tester Wideband Radio CommunicationTester Agilent Technologies 66311B W009-09 2018/4/28 2019/4/28 Inc Fluke Rohde &
Schwarz Rohde &
Schwarz 15B+
W055-01 2018/03/13 2019/03/12 CMW500 W005-02 2018/03/13 2019/03/12 CMW500 W005-02 2018/03/13 2019/03/12 Temperature Chamber GIANT FORCE ICT-150-40-
CP-AR W027-04 2017/12/04 2018/12/04 10 Wideband Radio CommunicationTeste Anristu MT8821C 6201462742 2017/8/13 2018/8/12 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 31 of 31 6 Measurement Uncertainty For a 95% confidence level (k = 2), the measurement expanded uncertainties for defined systems, in accordance with the recommendations of ISO 17025 as following:
Test Item Extended Uncertainty Data Transmit Output Power Data Power [dBm]
Bandwidth Magnitude [%]
U =0.37 dB U = 0.2%
Band Edge Compliance Disturbance Power [dBm]
U = 2.0 dB Spurious Emissions, Conducted Disturbance Power [dBm]
U = 2.0 dB Field Strength of Spurious Radiation ERP[dBm]/EIRP [dBm]
For 3 m Chamber:
U = 4.5 dB (30 MHz to 1GHz) U = 3.3 dB (above 1 GHz) For 10 m Chamber:
U = 4.5 dB (30 MHz to 1GHz) U = 3.2 dB (above 1 GHz) Frequency Stability Frequency Accuracy [ppm]
U = 0.24 ppm 7 Photographs - EUT Constructional Details Refer to Appendix A - Photographs of EUT Constructional Details for SZEM1804003217RG. The End This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
| 1 2 3 4 5 | Reference test report part 10 | Test Report | 5.41 MiB | August 02 2019 / August 05 2019 |
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 1 of 44 Appendix B LTE-NB1 BAND4 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 1 2 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 2 of 44 CONTENT Page EFFECTIVE (ISOTROPIC) RADIATED POWER OUTPUT DATA ............................................................3 PEAK-TO-AVERAGE RATIO ........................................................................................................................5 2.1 FOR LTE-NB1 ...............................................................................................................................................6 2.1.1 Test Band = LTE-NB1 BAND4 ..............................................................................................................6 3 MODULATION CHARACTERISTICS ........................................................................................................11 3.1 FOR LTE-NB1 .............................................................................................................................................11 3.1.1 Test Band = LTE-NB1 BAND4 ............................................................................................................11 4 BANDWIDTH ................................................................................................................................................13 4.1 FOR LTE-NB1 .............................................................................................................................................14 4.1.1 Test Band = LTE-NB1 BAND4 ............................................................................................................14 5 BAND EDGES COMPLIANCE ....................................................................................................................17 5.1 FOR LTE-NB1 .............................................................................................................................................17 5.1.1 Test Band = LTE-NB1 BAND4 ............................................................................................................17 6 SPURIOUS EMISSION AT ANTENNA TERMINAL ..................................................................................23 6.1 FOR LTE-NB1 .............................................................................................................................................23 6.1.1 Test Band = LTE-NB1 BAND4 ............................................................................................................23 7 FIELD STRENGTH OF SPURIOUS RADIATION .....................................................................................42 7.1 FOR LTE-NB1 .............................................................................................................................................42 7.1.1 Test Band = LTE-NB1 BAND4 ............................................................................................................42 8 FREQUENCY STABILITY ...........................................................................................................................46 8.1 8.2 FREQUENCY ERROR VS. VOLTAGE ............................................................................................................46 FREQUENCY ERROR VS. TEMPERATURE ...................................................................................................47 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 3 of 44 Test
(kHz) Number channel Spacing Measured Test Band Test Mode Sub-carrier 1 Effective (Isotropic) Radiated Power Output Data Effective Isotropic Radiated Power of Transmitter (EIRP) for LTE-NB1 BAND4 EIRP
(dBm) 23.86 23.97 24.25 24.38 24.15 24.21 23.96 24.05 24.13 24.29 24.32 24.23
(dBm) 22.26 22.37 22.65 22.78 22.55 22.61 22.36 22.45 22.53 22.69 22.72 22.63 of T 1T0 1T47 1T0 1T47 1T0 1T47 1T0 1T47 1T0 1T47 1T0 1T47 BAND4 MCH MCH HCH HCH TM2 TM1 LCH LCH 3.75 3.75 Test Band Test Mode Sub-carrier Spacin
(kHz) Test channel TM1 15 BAND4 LCH MCH HCH LCH TM2 15 MCH HCH Number Measured of T 1T0 1T11 1T0 1T11 1T0 1T11 1T0 1T11 12T0 1T0 1T11 12T0 1T0 1T11 12T0
(dBm) 22.88 22.84 22.88 22.89 22.88 22.81 22.72 22.87 20.97 22.78 22.91 20.96 22.64 22.73 20.87 EIRP
(dBm) 24.48 24.44 24.48 24.49 24.48 24.41 24.32 24.47 22.57 24.38 24.51 22.56 24.24 24.33 22.47 limit
(dBm) Verdict PASS 30 30 PASS PASS 30 PASS 30 30 PASS PASS 30 PASS 30 PASS 30 30 PASS PASS 30 PASS 30 30 PASS limit
(dBm) Verdict 30 PASS PASS 30 PASS 30 PASS 30 30 PASS PASS 30 PASS 30 PASS 30 30 PASS PASS 30 PASS 30 30 PASS PASS 30 PASS 30 30 PASS Note:
a: For getting the EIRP (Efficient Isotropic Radiated Power) in substitution method, the following formula should be taken to calculate it, EIRP [dBm] = SGP [dBm] Cable Loss [dB] + Gain [dBi]
b: SGP=Signal Generator Level This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 4 of 44 2 Peak-to-Average Ratio Part I - Test Results Test Band Test Mode Test Channel Measured[dB]
Limit [dB]
TM1/1T BAND4 TM2/1T TM2/Full T LCH MCH HCH LCH MCH HCH LCH MCH HCH 5.22 4.90 1.59 4.14 6.43 1.68 3.91 2.29 3.68 13 13 13 13 13 13 13 13 13 Verdict PASS PASS PASS PASS PASS PASS PASS PASS PASS Part II - Test Plots 2.1 For LTE-NB1 2.1.1 Test Band = LTE-NB1 BAND4 2.1.1.1 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=15kHz.T size=1T0 2.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 5 of 44 2.1.1.1.2 Test Channel = MCH 2.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 6 of 44 2.1.1.2 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz.T size=1T0 2.1.1.2.1 Test Channel = LCH 2.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 7 of 44 2.1.1.2.3 Test Channel = HCH 2.1.1.3 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz.T size=12T0 2.1.1.3.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 8 of 44 2.1.1.3.2 Test Channel = MCH 2.1.1.3.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 9 of 44 3 Modulation Characteristics Part I - Test Plots 3.1 For LTE-NB1 3.1.1 Test Band = LTE-NB1 BAND4 3.1.1.1 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=15kHz.T size=1T0 3.1.1.1.1 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 10 of 44 3.1.1.2 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz.T size=12T0 3.1.1.2.1 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 4 Bandwidth Part I - Test Results Test Band Test Mode BAND4 TM2/15kHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 11 of 44 Test Channel LCH MCH HCH Occupied Bandwidth
[kHz]
185.41 185.41 185.41 Emission Bandwidth [kHz]
243.36 243.36 243.36 Verdict PASS PASS PASS 4.1 For LTE-NB1 4.1.1 Test Band = LTE-NB1 BAND4 4.1.1.1 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz.T size=12T0 4.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 12 of 44 4.1.1.1.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 13 of 44 4.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 14 of 44 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 15 of 44 5 Band Edges Compliance 5.1 For LTE-NB1 5.1.1 Test Band = LTE-NB1 BAND4 5.1.1.1 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=3.75kHz 5.1.1.1.1 Test Channel = LCH 5.1.1.1.1.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 16 of 44 5.1.1.1.2 Test Channel = HCH 5.1.1.1.2.1 Test T size=1T 5.1.1.2 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=3.75kHz 5.1.1.2.1 Test Channel = LCH 5.1.1.2.1.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 17 of 44 5.1.1.2.2 Test Channel = HCH 5.1.1.2.2.1 Test T size=1T 5.1.1.3 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=15kHz 5.1.1.3.1 Test Channel = LCH 5.1.1.3.1.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 18 of 44 5.1.1.3.2 Test Channel = HCH 5.1.1.3.2.1 Test T size=1T 5.1.1.4 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz 5.1.1.4.1 Test Channel = LCH 5.1.1.4.1.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 19 of 44 5.1.1.4.1.2 Test T size=Full T 5.1.1.4.2 Test Channel = HCH 5.1.1.4.2.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 20 of 44 5.1.1.4.2.2 Test T size=Full T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 21 of 44
[
6 Spurious Emission at Antenna Terminal NOTE1: For the averaged unwanted emissions measurements, the measurement points in each sweep is greater than twice the Span/RBW in order to ensure bin-to-bin spacing of < RBW/2 so that narrowband signals are not lost between frequency bins. As to the present test item, the "Measurement Points = k *
(Span / RBW)" with k between 4 and 5, which results in an acceptable level error of less than 0.5 dB. NOTE2: only the worst case data displayed in this report. Part I - Test Plots 6.1 For LTE-NB1 6.1.1 Test Band = LTE-NB1 BAND4 6.1.1.1 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=3.75kHz 6.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 22 of 44 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 23 of 44 6.1.1.1.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 24 of 44 6.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 25 of 44 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 26 of 44 6.1.1.2 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=3.75kHz 6.1.1.2.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 27 of 44 6.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 28 of 44 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 29 of 44 6.1.1.2.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 30 of 44 6.1.1.3 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=15kHz 6.1.1.3.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 31 of 44 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 32 of 44 6.1.1.3.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 33 of 44 6.1.1.3.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 34 of 44 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 35 of 44 6.1.1.4 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz 6.1.1.4.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 36 of 44 6.1.1.4.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 37 of 44 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 38 of 44 6.1.1.4.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 39 of 44 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 40 of 44 7 Field Strength of Spurious Radiation 7.1 For LTE-NB1 7.1.1 Test Band = LTE-NB1 BAND4 7.1.1.1 Test Mode =LTE-NB1/ Sub-carrier spacing=3.75kHz 7.1.1.1.1 Test Channel = LCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 64.400000 104.250000 1271.000000 3424.775000 5137.200000 6849.625000 63.400000 104.300000 1259.500000 3424.450000 5136.875000 6849.625000
-81.82
-76.93
-66.61
-45.78
-57.82
-44.89
-78.26
-83.62
-62.57
-41.25
-65.01
-47.25
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-68.82
-63.93
-53.61
-32.78
-44.82
-31.89
-65.26
-70.62
-49.57
-28.25
-52.01
-34.25 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal 7.1.1.1.2 Test Channel = MCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 65.200000 104.250000 1128.500000 3465.725000 5197.000000 6929.575000 62.500000 104.300000 1225.000000 3464.750000 5197.650000 6929.575000
-82.22
-76.95
-67.06
-52.09
-62.04
-46.16
-77.65
-83.11
-62.54
-36.96
-63.83
-47.35
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-69.22
-63.95
-54.06
-39.09
-49.04
-33.16
-64.65
-70.11
-49.54
-23.96
-50.83
-34.35 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 41 of 44 7.1.1.1.3 Test Channel = HCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 64.300000 148.200000 1224.500000 3504.725000 5257.125000 7009.525000 62.700000 104.300000 1257.000000 3505.375000 5257.125000 7009.525000
-82.01
-65.81
-66.63
-55.99
-61.62
-48.56
-77.80
-83.69
-62.59
-38.44
-66.31
-49.44
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-69.01
-52.81
-53.63
-42.99
-48.62
-35.56
-64.80
-70.69
-49.59
-25.44
-53.31
-36.44 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal NOTE:
1) The disturbance above 13GHz and below 30MHz was very low, and the above harmonics were the highest point could be found when testing, so only the above harmonics had been displayed. 2) We have tested all modulation and all bandwidth, but only the worst case data presented in this report. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 42 of 44 8 Frequency Stability 8.1 Frequency Error VS. Voltage Test Band Test Mode Test Channel Test Temp. LCH TN TM1/15k MCH TN HCH TN LCH TN TM2/15k MCH TN HCH TN BAND4 Test Volt. VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH Freq. Error
[Hz]
11.19
-7.35
-9.26
-7.84 5.17 3.61
-0.49 1.50
-0.84 8.88
-2.13
-7.16 5.60 5.24 0.81 0.63
-9.24 3.85 Freq. vs. rated [ppm] Verdict PASS 0.006542 PASS
-0.004301 PASS
-0.005414 PASS
-0.004526 PASS 0.002983 PASS 0.002085 PASS
-0.000279 PASS 0.000854 PASS
-0.000476 PASS 0.005195 PASS
-0.001248 PASS
-0.004189 PASS 0.003233 PASS 0.003026 PASS 0.000467 PASS 0.000361 PASS
-0.005265 PASS 0.002194 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 43 of 44 8.2 Frequency Error VS. Temperature Test Band Test Mode Test Channel Test Volt. Test Temp.
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50 LCH VN BAND4 TM1 15kHz MCH VN HCH VN Freq. Error
[Hz]
-8.38 7.55
-1.47 1.70 8.77
-0.97 1.45
-8.37 8.61 8.28
-0.06
-5.16 3.11 7.30 2.12 3.62 2.30
-0.58 1.23 2.93 7.01 0.89 7.16 2.02 8.03 3.36 8.54 Freq. vs. rated [ppm]
Verdict
-0.004901 0.004413
-0.000857 0.000995 0.005127
-0.000570 0.000847
-0.004893 0.005038 0.004780
-0.000036
-0.002976 0.001796 0.004213 0.001225 0.002089 0.001327
-0.000335 0.000702 0.001669 0.003994 0.000506 0.004077 0.001150 0.004575 0.001914 0.004869 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 44 of 44 Test Band Test Mode Test Channel Test Volt. Test Temp.
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50 LCH VN BAND4 TM2 15kHz MCH VN HCH VN The End Freq. Error
[Hz]
-4.54
-8.65
-5.35
-5.57 7.05 0.81 8.31 4.35
-5.81
-7.00 2.32
-0.79
-9.99
-2.82 9.69
-1.94 5.39 2.43 7.79 9.88
-9.49
-3.95
-3.14 6.09 6.58 8.25 9.38 Freq. vs. rated [ppm]
Verdict
-0.002655
-0.005060
-0.003127
-0.003257 0.004123 0.000475 0.004859 0.002546
-0.003399
-0.004040 0.001341
-0.000455
-0.005768
-0.001629 0.005593
-0.001122 0.003113 0.001403 0.004437 0.005629
-0.005406
-0.002251
-0.001790 0.003469 0.003749 0.004699 0.005346 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
| 1 2 3 4 5 | Reference test report part 11 | Test Report | 4.65 MiB | August 02 2019 / August 05 2019 |
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 1 of 38 Appendix B LTE-NB1 BAND12 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 1 2 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 2 of 38 CONTENT Page EFFECTIVE (ISOTROPIC) RADIATED POWER OUTPUT DATA ............................................................3 PEAK-TO-AVERAGE RATIO ........................................................................................................................5 2.1 FOR LTE-NB1 ...............................................................................................................................................5 2.1.1 Test Band = LTE-NB1 BAND12 ...........................................................................................................5 3 MODULATION CHARACTERISTICS ........................................................................................................10 3.1 FOR LTE-NB1 .............................................................................................................................................10 3.1.1 Test Band = LTE-NB1 BAND12 .........................................................................................................10 4 BANDWIDTH ................................................................................................................................................12 4.1 FOR LTE-NB1 .............................................................................................................................................13 4.1.1 Test Band = LTE-NB1 BAND12 .........................................................................................................13 5 BAND EDGES COMPLIANCE ....................................................................................................................16 5.1 FOR LTE-NB1 .............................................................................................................................................16 5.1.1 Test Band = LTE-NB1 BAND12 .........................................................................................................16 6 SPURIOUS EMISSION AT ANTENNA TERMINAL ..................................................................................22 6.1 FOR LTE-NB1 .............................................................................................................................................22 6.1.1 Test Band = LTE-NB1 BAND12 .........................................................................................................22 7 FIELD STRENGTH OF SPURIOUS RADIATION .....................................................................................35 7.1 FOR LTE-NB1 .............................................................................................................................................35 7.1.1 Test Band = LTE-NB1 BAND12 .........................................................................................................35 8 FREQUENCY STABILITY ...........................................................................................................................39 8.1 8.2 FREQUENCY ERROR VS. VOLTAGE ............................................................................................................39 FREQUENCY ERROR VS. TEMPERATURE ...................................................................................................40 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 3 of 38 1 Effective (Isotropic) Radiated Power Output Data Effective Isotropic Radiated Power of Transmitter (EIRP) for LTE-NB1 BAND12 Test Band Test Mode Sub-carrier Spacing
(kHz) BAND12 TM1 3.75 TM2 3.75 Test channel LCH MCH HCH LCH MCH HCH Number of T 1T0 1T47 1T0 1T47 1T0 1T47 1T0 1T47 1T0 1T47 1T0 1T47 Measured
(dBm) 22.34 22.35 22.26 22.36 22.4 22.36 22.51 22.58 22.45 22.42 22.42 22.44 ERP
(dBm) 19.59 19.6 19.51 19.61 19.65 19.61 19.76 19.83 19.7 19.67 19.67 19.69 limit
(dBm) Verdict PASS 34.77 34.77 PASS PASS 34.77 PASS 34.77 34.77 PASS PASS 34.77 PASS 34.77 PASS 34.77 34.77 PASS PASS 34.77 PASS 34.77 34.77 PASS Test Band Test Mode Sub-carrier Spacin
(kHz) Test channel TM1 15 BAND12 LCH MCH HCH LCH TM2 15 MCH HCH Number Measured of T 1T0 1T11 1T0 1T11 1T0 1T11 1T0 1T11 12T0 1T0 1T11 12T0 1T0 1T11 12T0
(dBm) 22.1 22.12 22.18 22.26 22.23 22.22 22.22 22.21 20.26 22.33 22.37 20.35 22.38 22.41 20.25 ERP
(dBm) 19.35 19.37 19.43 19.51 19.48 19.47 19.47 19.46 17.51 19.58 19.62 17.6 19.63 19.66 17.5 limit
(dBm) Verdict 34.77 PASS PASS 34.77 PASS 34.77 PASS 34.77 34.77 PASS PASS 34.77 PASS 34.77 PASS 34.77 34.77 PASS PASS 34.77 PASS 34.77 34.77 PASS PASS 34.77 PASS 34.77 34.77 PASS Note:
a: For getting the ERP (Efficient Radiated Power) in substitution method, the following formula should be taken to calculate it, ERP [dBm] = SGP [dBm] Cable Loss [dB] + Gain [dBd]
b: SGP=Signal Generator Level This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 4 of 38 2 Peak-to-Average Ratio Part I - Test Results Test Band Test Mode Test Channel Measured[dB]
Limit [dB]
TM1/1T BAND12 TM2/1T TM2/Full T LCH MCH HCH LCH MCH HCH LCH MCH HCH 5.13 4.58 4.67 4.84 4.12 4.03 6.41 5.10 3.22 13 13 13 13 13 13 13 13 13 Verdict PASS PASS PASS PASS PASS PASS PASS PASS PASS Part II - Test Plots 2.1 For LTE-NB1 2.1.1 Test Band = LTE-NB1 BAND12 2.1.1.1 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=15kHz.T size=1T0 2.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 5 of 38 2.1.1.1.2 Test Channel = MCH 2.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 6 of 38 2.1.1.2 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz.T size=1T0 2.1.1.2.1 Test Channel = LCH 2.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 7 of 38 2.1.1.2.3 Test Channel = HCH 2.1.1.3 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz.T size=12T0 2.1.1.3.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 8 of 38 2.1.1.3.2 Test Channel = MCH 2.1.1.3.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 9 of 38 3 Modulation Characteristics Part I - Test Plots 3.1 For LTE-NB1 3.1.1 Test Band = LTE-NB1 BAND12 3.1.1.1 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=15kHz.T size=1T0 3.1.1.1.1 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 10 of 38 3.1.1.2 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz.T size=12T0 3.1.1.2.1 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 4 Bandwidth Part I - Test Results Test Band Test Mode BAND12 TM2/15kHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 11 of 38 Test Channel LCH MCH HCH Occupied Bandwidth
[kHz]
187.01 185.01 185.01 Emission Bandwidth [kHz]
246.55 246.75 243.76 Verdict PASS PASS PASS 4.1 For LTE-NB1 4.1.1 Test Band = LTE-NB1 BAND12 4.1.1.1 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz.T size=12T0 4.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 12 of 38 4.1.1.1.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 13 of 38 4.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 14 of 38 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 15 of 38 5 Band Edges Compliance 5.1 For LTE-NB1 5.1.1 Test Band = LTE-NB1 BAND12 5.1.1.1 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=3.75kHz 5.1.1.1.1 Test Channel = LCH 5.1.1.1.1.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 16 of 38 5.1.1.1.2 Test Channel = HCH 5.1.1.1.2.1 Test T size=1T 5.1.1.2 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=3.75kHz 5.1.1.2.1 Test Channel = LCH 5.1.1.2.1.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 17 of 38 5.1.1.2.2 Test Channel = HCH 5.1.1.2.2.1 Test T size=1T 5.1.1.3 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=15kHz 5.1.1.3.1 Test Channel = LCH 5.1.1.3.1.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 18 of 38 5.1.1.3.2 Test Channel = HCH 5.1.1.3.2.1 Test T size=1T 5.1.1.4 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz 5.1.1.4.1 Test Channel = LCH 5.1.1.4.1.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 19 of 38 5.1.1.4.1.2 Test T size=Full T 5.1.1.4.2 Test Channel = HCH 5.1.1.4.2.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 20 of 38 5.1.1.4.2.2 Test T size=Full T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 21 of 38
[
6 Spurious Emission at Antenna Terminal NOTE1: For the averaged unwanted emissions measurements, the measurement points in each sweep is greater than twice the Span/RBW in order to ensure bin-to-bin spacing of < RBW/2 so that narrowband signals are not lost between frequency bins. As to the present test item, the "Measurement Points = k *
(Span / RBW)" with k between 4 and 5, which results in an acceptable level error of less than 0.5 dB. NOTE2: only the worst case data displayed in this report. Part I - Test Plots 6.1 For LTE-NB1 6.1.1 Test Band = LTE-NB1 BAND12 6.1.1.1 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=3.75kHz 6.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 22 of 38 6.1.1.1.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 23 of 38 6.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 24 of 38 6.1.1.2 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=3.75kHz 6.1.1.2.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 25 of 38 6.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 26 of 38 6.1.1.2.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 27 of 38 6.1.1.3 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=15kHz 6.1.1.3.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 28 of 38 6.1.1.3.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 29 of 38 6.1.1.3.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 30 of 38 6.1.1.4 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz 6.1.1.4.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 31 of 38 6.1.1.4.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 32 of 38 6.1.1.4.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 33 of 38 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 34 of 38 7 Field Strength of Spurious Radiation 7.1 For LTE-NB1 7.1.1 Test Band = LTE-NB1 BAND12 7.1.1.1 Test Mode =LTE-NB1/ Sub-carrier spacing=3.75kHz 7.1.1.1.1 Test Channel = LCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 63.226667 1402.500000 2105.000000 3507.000000 5173.762500 6049.800000 62.713333 1402.500000 2104.500000 3507.487500 5048.475000 7807.725000
-81.98
-45.28
-52.97
-66.84
-66.80
-65.21
-77.70
-37.16
-52.73
-68.03
-66.48
-64.27
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-68.98
-32.28
-39.97
-53.84
-53.80
-52.21
-64.70
-24.16
-39.73
-55.03
-53.48
-51.27 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal 7.1.1.1.2 Test Channel = MCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 63.880000 568.295833 1415.000000 2122.500000 3537.712500 7074.037500 62.993333 943.258333 1414.500000 2122.500000 3536.737500 7917.900000
-81.43
-81.12
-48.27
-59.91
-67.44
-63.19
-77.98
-62.29
-40.94
-53.91
-66.73
-64.02
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-68.43
-68.12
-35.27
-46.91
-54.44
-50.19
-64.98
-49.29
-27.94
-40.91
-53.73
-51.02 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 35 of 38 7.1.1.1.3 Test Channel = HCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 64.440000 124.966667 1427.000000 2140.500000 3566.962500 5708.062500 61.920000 104.293333 1426.500000 2140.500000 3566.962500 7708.762500
-81.89
-87.69
-49.15
-59.41
-67.58
-65.99
-78.33
-84.75
-40.28
-56.92
-66.69
-64.94
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-68.89
-74.69
-36.15
-46.41
-54.58
-52.99
-65.33
-71.75
-27.28
-43.92
-53.69
-51.94 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal NOTE:
1) The disturbance above 13GHz and below 30MHz was very low, and the above harmonics were the highest point could be found when testing, so only the above harmonics had been displayed. 2) We have tested all modulation and all bandwidth, but only the worst case data presented in this report. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 36 of 38 8 Frequency Stability 8.1 Frequency Error VS. Voltage Test Band Test Mode Test Channel Test Temp. LCH TN TM1/15k MCH TN HCH TN LCH TN TM2/15k MCH TN HCH TN BAND12 Test Volt. VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH Freq. Error
[Hz]
3.46 7.56
-6.96
-5.39
-5.86
-3.85
-0.38
-6.56
-1.51
-2.99 1.62 3.88 7.95 9.62
-0.62
-5.47 4.99 7.63 Freq. vs. rated [ppm] Verdict PASS 0.004956 PASS 0.010813 PASS
-0.009957 PASS
-0.007614 PASS
-0.008286 PASS
-0.005447 PASS
-0.000526 PASS
-0.009159 PASS
-0.002107 PASS
-0.004272 PASS 0.002314 PASS 0.005550 PASS 0.011233 PASS 0.013599 PASS
-0.000879 PASS
-0.007637 PASS 0.006969 PASS 0.010658 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 37 of 38 8.2 Frequency Error VS. Temperature Test Band Test Mode Test Channel Test Volt. Test Temp.
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50 LCH VN BAND12 TM1 15kHz MCH VN HCH VN Freq. Error
[Hz]
9.47 8.01
-4.79
-1.49 6.86 3.29
-9.22
-1.10 0.53 9.90 7.63 2.88 6.27 9.36
-2.09
-3.37 4.01
-0.85 6.69
-5.94 3.17
-3.49
-5.21 6.30 3.64
-2.15 1.04 Freq. vs. rated [ppm]
Verdict 0.013544 0.011459
-0.006852
-0.002137 0.009819 0.004704
-0.013183
-0.001567 0.000763 0.013995 0.010778 0.004067 0.008866 0.013230
-0.002952
-0.004757 0.005665
-0.001206 0.009340
-0.008293 0.004424
-0.004872
-0.007273 0.008801 0.005088
-0.003005 0.001447 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 38 of 38 Test Band Test Mode Test Channel Test Volt. Test Temp.
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50 LCH VN BAND12 TM2 15kHz MCH VN HCH VN The End Freq. Error
[Hz]
0.75 7.35
-4.48
-7.89
-1.84 9.47 8.99 1.04
-0.03
-5.73 5.21
-6.32 5.63
-1.10 5.88
-3.33 6.56
-1.87
-9.39
-2.76 9.16
-8.34
-7.38 7.03
-3.37
-4.93
-8.62 Freq. vs. rated [ppm]
Verdict 0.001067 0.010509
-0.006407
-0.011292
-0.002629 0.013550 0.012854 0.001494
-0.000041
-0.008106 0.007362
-0.008936 0.007961
-0.001556 0.008309
-0.004700 0.009272
-0.002644
-0.013116
-0.003862 0.012793
-0.011654
-0.010312 0.009826
-0.004713
-0.006888
-0.012035 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
| 1 2 3 4 5 | Reference test report part 12 | Test Report | 5.40 MiB | August 02 2019 / August 05 2019 |
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 1 of 32 Appendix B LTE-NB1 BAND 13 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 1 2 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 2 of 32 CONTENT Page EFFECTIVE (ISOTROPIC) RADIATED POWER OUTPUT DATA ............................................................3 PEAK-TO-AVERAGE RATIO ........................................................................................................................4 2.1 FOR LTE-NB1 ...............................................................................................................................................4 2.1.1 Test Band = LTE-NB1 band13 ..............................................................................................................4 3 MODULATION CHARACTERISTICS ..........................................................................................................9 3.1 FOR LTE-NB1 ...............................................................................................................................................9 3.1.1 Test Band = LTE-NB1 band13 ..............................................................................................................9 4 BANDWIDTH ................................................................................................................................................11 4.1 FOR LTE-NB1 .............................................................................................................................................11 4.1.1 Test Band = LTE-NB1 band13 ............................................................................................................11 5 BAND EDGES COMPLIANCE ....................................................................................................................15 5.1 FOR LTE-NB1 .............................................................................................................................................15 5.1.1 Test Band = LTE-NB1 band13 ............................................................................................................15 6 SPURIOUS EMISSION AT ANTENNA TERMINAL ..................................................................................21 6.1 FOR LTE-NB1 .............................................................................................................................................21 6.1.1 Test Band = LTE-NB1 band13 ............................................................................................................21 7 FIELD STRENGTH OF SPURIOUS RADIATION .....................................................................................28 7.1 FOR LTE-NB1 .............................................................................................................................................28 7.1.1 Test Band = LTE-NB1 band13 ............................................................................................................28 8 FREQUENCY STABILITY ...........................................................................................................................30 8.1 8.2 FREQUENCY ERROR VS. VOLTAGE ............................................................................................................30 FREQUENCY ERROR VS. TEMPERATURE ...................................................................................................31 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 3 of 32 1 Effective (Isotropic) Radiated Power Output Data Effective Isotropic Radiated Power of Transmitter (EIRP) for LTE-NB1 BAND13 Test Band Test Mode Sub-carrier Spacing
(kHz) BAND13 TM1 3.75 TM2 3.75 Test channel LCH MCH HCH LCH MCH HCH Number of T 1T0 1T47 1T0 1T47 1T0 1T47 1T0 1T47 1T0 1T47 1T0 1T47 Measured
(dBm) 22.73 22.64 22.61 22.67 22.67 22.54 22.67 22.7 22.75 22.64 22.68 22.63 ERP
(dBm) 19.78 19.69 19.66 19.72 19.72 19.59 19.72 19.75 19.8 19.69 19.73 19.68 limit
(dBm) Verdict PASS 34.77 34.77 PASS PASS 34.77 PASS 34.77 34.77 PASS PASS 34.77 PASS 34.77 PASS 34.77 34.77 PASS PASS 34.77 PASS 34.77 34.77 PASS Test Band Test Mode Sub-carrier Spacin
(kHz) Test channel TM1 15 BAND13 LCH MCH HCH LCH TM2 15 MCH HCH Number Measured of T 1T0 1T11 1T0 1T11 1T0 1T11 1T0 1T11 12T0 1T0 1T11 12T0 1T0 1T11 12T0
(dBm) 23.02 23.15 22.83 22.78 22.81 22.71 23.07 23.03 21.15 22.87 22.95 20.88 22.75 22.73 22.84 ERP
(dBm) 20.07 20.2 19.88 19.83 19.86 19.76 20.12 20.08 18.2 19.92 20 17.93 19.8 19.78 19.89 limit
(dBm) Verdict 34.77 PASS PASS 34.77 PASS 34.77 PASS 34.77 34.77 PASS PASS 34.77 PASS 34.77 PASS 34.77 34.77 PASS PASS 34.77 PASS 34.77 34.77 PASS PASS 34.77 PASS 34.77 34.77 PASS Note:
a: For getting the ERP (Efficient Radiated Power) in substitution method, the following formula should be taken to calculate it, ERP [dBm] = SGP [dBm] Cable Loss [dB] + Gain [dBd]
b: SGP=Signal Generator Level This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 4 of 32 2 Peak-to-Average Ratio Part I - Test Results Test Band Test Mode Test Channel Measured[dB]
Limit [dB]
TM1/1T BAND13 TM2/1T TM2/Full T LCH MCH HCH LCH MCH HCH LCH MCH HCH 4.46 4.52 4.61 3.97 4.14 4.03 4.29 4.04 4.03 13 13 13 13 13 13 13 13 13 Verdict PASS PASS PASS PASS PASS PASS PASS PASS PASS Part II - Test Plots 2.1 For LTE-NB1 2.1.1 Test Band = LTE-NB1 band13 2.1.1.1 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=15kHz.T size=1T0 2.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 5 of 32 2.1.1.1.2 Test Channel = MCH 2.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 6 of 32 2.1.1.2 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz.T size=1T0 2.1.1.2.1 Test Channel = LCH 2.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 7 of 32 2.1.1.2.3 Test Channel = HCH 2.1.1.3 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz.T size=12T0 2.1.1.3.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 8 of 32 2.1.1.3.2 Test Channel = MCH 2.1.1.3.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 9 of 32 3 Modulation Characteristics Part I - Test Plots 3.1 For LTE-NB1 3.1.1 Test Band = LTE-NB1 band13 3.1.1.1 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=15kHz.T size=1T0 3.1.1.1.1 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 10 of 32 3.1.1.2 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz.T size=12T0 3.1.1.2.1 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 4 Bandwidth Part I - Test Results Test Band Test Mode BAND13 TM2/15kHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 11 of 32 Test Channel LCH MCH HCH Occupied Bandwidth
[kHz]
185.81 184.61 185.01 Emission Bandwidth [kHz]
244.16 243.36 244.16 Verdict PASS PASS PASS 4.1 For LTE-NB1 4.1.1 Test Band = LTE-NB1 band13 4.1.1.1 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz.T size=12T0 4.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 12 of 32 4.1.1.1.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 13 of 32 4.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 14 of 32 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 15 of 32 5 Band Edges Compliance 5.1 For LTE-NB1 5.1.1 Test Band = LTE-NB1 band13 5.1.1.1 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=3.75kHz 5.1.1.1.1 Test Channel = LCH 5.1.1.1.1.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 16 of 32 5.1.1.1.2 Test Channel = HCH 5.1.1.1.2.1 Test T size=1T 5.1.1.2 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=3.75kHz 5.1.1.2.1 Test Channel = LCH 5.1.1.2.1.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 17 of 32 5.1.1.2.2 Test Channel = HCH 5.1.1.2.2.1 Test T size=1T 5.1.1.3 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=15kHz 5.1.1.3.1 Test Channel = LCH 5.1.1.3.1.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 18 of 32 5.1.1.3.2 Test Channel = HCH 5.1.1.3.2.1 Test T size=1T 5.1.1.4 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz 5.1.1.4.1 Test Channel = LCH 5.1.1.4.1.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 19 of 32 5.1.1.4.1.2 Test T size=Full T 5.1.1.4.2 Test Channel = HCH 5.1.1.4.2.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 20 of 32 5.1.1.4.2.2 Test T size=Full T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 21 of 32 6 Spurious Emission at Antenna Terminal NOTE1: For the averaged unwanted emissions measurements, the measurement points in each sweep is greater than twice the Span/RBW in order to ensure bin-to-bin spacing of < RBW/2 so that narrowband signals are not lost between frequency bins. As to the present test item, the "Measurement Points = k *
(Span / RBW)" with k between 4 and 5, which results in an acceptable level error of less than 0.5 dB. NOTE2: only the worst case data displayed in this report. Part I - Test Plots 6.1 For LTE-NB1 6.1.1 Test Band = LTE-NB1 band13 6.1.1.1 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=3.75kHz 6.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 22 of 32 6.1.1.1.2 Test Channel = MCH 6.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 23 of 32 6.1.1.2 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=3.75kHz 6.1.1.2.1 Test Channel = LCH 6.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 24 of 32 6.1.1.2.3 Test Channel = HCH 6.1.1.3 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=15kHz 6.1.1.3.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 25 of 32 6.1.1.3.2 Test Channel = MCH 6.1.1.3.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 26 of 32 6.1.1.4 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz 6.1.1.4.1 Test Channel = LCH 6.1.1.4.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 27 of 32 6.1.1.4.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 28 of 32 7 Field Strength of Spurious Radiation 7.1 For LTE-NB1 7.1.1 Test Band = LTE-NB1 band13 7.1.1.1 Test Mode =LTE-NB1/ Sub-carrier spacing=3.75kHz 7.1.1.1.1 Test Channel = LCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 64.813333 90.480000 590.891667 1559.000000 3221.812500 6040.050000 63.366667 104.293333 1039.000000 1558.500000 3117.487500 6057.112500
-81.67
-80.91
-80.43
-55.74
-68.94
-65.53
-77.59
-83.50
-61.18
-49.94
-63.67
-65.56
-13.00
-13.00
-13.00
-40.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-68.67
-67.91
-67.43
-15.74
-55.94
-52.53
-64.59
-70.50
-48.18
-36.94
-50.67
-52.56 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal 7.1.1.1.2 Test Channel = MCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 64.066667 90.480000 651.620833 1564.000000 2802.000000 6050.287500 63.226667 104.293333 1042.500000 1563.500000 3127.725000 7829.662500
-82.05
-83.97
-78.69
-56.06
-57.76
-65.29
-77.96
-85.33
-60.72
-50.22
-64.06
-64.56
-13.00
-13.00
-13.00
-40.00
-13.00
-13.00
-13.00
-13.00
-13.00
-40.00
-13.00
-13.00
-69.05
-70.97
-65.69
-16.06
-44.76
-52.29
-64.96
-72.33
-47.72
-10.22
-51.06
-51.56 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 29 of 32 7.1.1.1.3 Test Channel = HCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 63.553333 104.293333 344.486667 1569.000000 3137.475000 5515.012500 62.993333 104.293333 268.560000 1569.000000 3136.987500 6490.500000
-81.85
-84.81
-86.72
-51.55
-68.77
-66.86
-78.12
-88.81
-87.81
-46.09
-69.02
-65.37
-13.00
-13.00
-13.00
-40.00
-13.00
-13.00
-13.00
-13.00
-13.00
-40.00
-13.00
-13.00
-68.85
-71.81
-73.72
-11.55
-55.77
-53.86
-65.12
-75.81
-74.81
-6.09
-56.02
-52.37 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal NOTE:
1) The disturbance above 13GHz and below 30MHz was very low, and the above harmonics were the highest point could be found when testing, so only the above harmonics had been displayed. 2) We have tested all modulation and all bandwidth, but only the worst case data presented in this report. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 30 of 32 8 Frequency Stability 8.1 Frequency Error VS. Voltage Test Band Test Mode Test Channel Test Temp. LCH TN TM1/15k MCH TN HCH TN LCH TN TM2/15k MCH TN HCH TN BAND13 Test Volt. VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH Freq. Error
[Hz]
5.51
-8.99
-6.82 8.05 6.91 3.09
-9.73 0.75
-2.79 0.62
-9.39 9.08
-3.87 6.44
-5.40 4.58
-9.97 1.86 Freq. vs. rated [ppm] Verdict PASS 0.007089 PASS
-0.011572 PASS
-0.008781 PASS 0.010300 PASS 0.008835 PASS 0.003951 PASS
-0.012369 PASS 0.000947 PASS
-0.003546 PASS 0.000799 PASS
-0.012085 PASS 0.011686 PASS
-0.004949 PASS 0.008240 PASS
-0.006908 PASS 0.005815 PASS
-0.012670 PASS 0.002365 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 31 of 32 8.2 Frequency Error VS. Temperature Test Band Test Mode Test Channel Test Volt. Test Temp.
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50 LCH VN BAND13 TM1 15kHz MCH VN HCH VN Freq. Error
[Hz]
-7.60
-4.75
-4.61 3.49
-8.32
-8.64
-5.72 2.82 9.88 8.80
-8.52 6.68
-4.94 7.59 7.04 6.09
-3.00
-0.14 2.68 1.07
-4.40 7.29
-7.04 9.61
-5.50 0.04 6.34 Freq. vs. rated [ppm]
Verdict
-0.009786
-0.006118
-0.005927 0.004485
-0.010702
-0.011122
-0.007364 0.003623 0.012708 0.011250
-0.010894 0.008548
-0.006316 0.009707 0.008996 0.007784
-0.003834
-0.000175 0.003407 0.001356
-0.005595 0.009265
-0.008949 0.012214
-0.006988 0.000048 0.008060 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 32 of 32 Test Band Test Mode Test Channel Test Volt. Test Temp.
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50 LCH VN BAND13 TM2 15kHz MCH VN HCH VN The End Freq. Error
[Hz]
-4.56
-1.53
-4.98
-3.46
-6.30
-1.73
-8.27 0.66
-2.66
-0.23 9.60 1.55
-7.07
-1.28
-6.77 8.53
-8.68
-9.13
-4.61
-5.81
-5.69
-1.60
-6.27
-5.29
-9.23
-6.37
-8.92 Freq. vs. rated [ppm]
Verdict
-0.005862
-0.001967
-0.006410
-0.004448
-0.008109
-0.002232
-0.010645 0.000844
-0.003424
-0.000293 0.012280 0.001983
-0.009046
-0.001634
-0.008660 0.010910
-0.011100
-0.011669
-0.005857
-0.007385
-0.007231
-0.002037
-0.007964
-0.006718
-0.011733
-0.008089
-0.011330 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
| 1 2 3 4 5 | Reference test report part 13 | Test Report | 5.76 MiB | August 02 2019 / August 05 2019 |
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 1 of 38 Appendix B LTE-NB1 BAND26(814MHz-824MHz) This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 2 of 38 CONTENT Page 1 EFFECTIVE (ISOTROPIC) RADIATED POWER OUTPUT DATA ............................................................ 3 2 PEAK-TO-AVERAGE RATIO ....................................................................................................................... 4 2.1 FOR LTE-NB1 .............................................................................................................................................. 4 2.1.1 Test Band = LTE-NB1 BAND26(814MHz-824MHz) ......................................................................... 4 3 MODULATION CHARACTERISTICS .......................................................................................................... 9 3.1 FOR LTE-NB1 .............................................................................................................................................. 9 3.1.1 Test Band = LTE-NB1 BAND26(814MHz-824MHz) ......................................................................... 9 4 BANDWIDTH ............................................................................................................................................... 11 4.1 FOR LTE-NB1 ............................................................................................................................................ 11 4.1.1 Test Band = LTE-NB1 BAND26(814MHz-824MHz) ....................................................................... 11 5 EMISSION MASK ........................................................................................................................................ 15 5.1 FOR LTE-NB1 ............................................................................................................................................ 15 5.1.1 Test Band = LTE-NB1 BAND26(814MHz-824MHz) ....................................................................... 15 6 SPURIOUS EMISSION AT ANTENNA TERMINAL .................................................................................. 21 6.1 FOR LTE-NB1 ............................................................................................................................................ 21 6.1.1 Test Band = LTE-NB1 BAND26(814MHz-824MHz) ....................................................................... 21 7 FIELD STRENGTH OF SPURIOUS RADIATION ..................................................................................... 34 7.1 FOR LTE-NB1 ............................................................................................................................................ 34 7.1.1 Test Band = LTE-NB1 BAND26(814MHz-824MHz) ....................................................................... 34 8 FREQUENCY STABILITY .......................................................................................................................... 36 FREQUENCY ERROR VS. VOLTAGE ........................................................................................................... 36 FREQUENCY ERROR VS. TEMPERATURE .................................................................................................. 37 8.1 8.2 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 3 of 38 1 Effective (Isotropic) Radiated Power Output Data Effective Isotropic Radiated Power of Transmitter (EIRP) for LTE-NB1 BAND26 Test Band Test Mode Sub-carrier Spacing
(kHz) Test Number Measured channel of T
(dBm) ERP
(dBm) limit
(dBm) Verdict LCH TM1 3.75 MCH BAND26 HCH LCH TM2 3.75 MCH HCH 1T0 1T47 1T0 1T47 1T0 1T47 1T0 1T47 1T0 1T47 1T0 1T47 22.29 22.36 22.72 22.68 22.76 22.71 22.28 22.32 22.67 22.67 22.74 22.68 18.74 18.81 19.17 19.13 19.21 19.16 18.73 18.77 19.12 19.12 19.19 19.13 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS Test Band Test Mode Sub-carrier Spacin
(kHz) Test Number Measured channel of T
(dBm) ERP
(dBm) limit
(dBm) Verdict LCH TM1 15 MCH BAND26 HCH LCH TM2 15 MCH HCH 1T0 1T11 1T0 1T11 1T0 1T11 1T0 1T11 12T0 1T0 1T11 12T0 1T0 1T11 12T0 22.04 22.03 22.71 22.64 22.82 22.75 22.13 22.02 20.4 22.69 22.61 20.67 22.76 22.81 20.78 18.49 18.48 19.16 19.09 19.27 19.2 18.58 18.47 16.85 19.14 19.06 17.12 19.21 19.26 17.23 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS Note:
a: For getting the ERP (Efficient Radiated Power) in substitution method, the following formula should be taken to calculate it, ERP [dBm] = SGP [dBm] Cable Loss [dB] + Gain [dBd]
b: SGP=Signal Generator Level This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 4 of 38 2 Peak-to-Average Ratio Part I - Test Results Test Band Test Mode Test Channel Measured[dB]
Limit [dB]
Verdict TM1/1T BAND26 TM2/1T TM2/Full T Part II - Test Plots 2.1 For LTE-NB1 LCH MCH HCH LCH MCH HCH LCH MCH HCH 5.16 4.67 4.96 4.12 4.46 5.51 4.84 3.42 4.72 13 13 13 13 13 13 13 13 13 PASS PASS PASS PASS PASS PASS PASS PASS PASS 2.1.1 Test Band = LTE-NB1 BAND26(814MHz-824MHz) 2.1.1.1 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=15kHz.T size=1T0 2.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 5 of 38 2.1.1.1.2 Test Channel = MCH 2.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 6 of 38 2.1.1.2 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz.T size=1T0 2.1.1.2.1 Test Channel = LCH 2.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 7 of 38 2.1.1.2.3 Test Channel = HCH 2.1.1.3 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz.T size=12T0 2.1.1.3.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 8 of 38 2.1.1.3.2 Test Channel = MCH 2.1.1.3.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 9 of 38 3 Modulation Characteristics Part I - Test Plots 3.1 For LTE-NB1 3.1.1 Test Band = LTE-NB1 BAND26(814MHz-824MHz) 3.1.1.1 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=15kHz.T size=1T0 3.1.1.1.1 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 10 of 38 3.1.1.2 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz.T size=12T0 3.1.1.2.1 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 4 Bandwidth Part I - Test Results Test Band Test Mode BAND26 TM2/15kHz 4.1 For LTE-NB1 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 11 of 38 Test Occupied Bandwidth Emission Channel LCH MCH HCH
[kHz]
184.61 185.01 185.01 Bandwidth [kHz]
243.76 243.76 242.96 Verdict PASS PASS PASS 4.1.1 Test Band = LTE-NB1 BAND26(814MHz-824MHz) 4.1.1.1 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz.T size=12T0 4.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 12 of 38 4.1.1.1.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 13 of 38 4.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 14 of 38 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 15 of 38 5 Emission Mask 5.1 For LTE-NB1 5.1.1 Test Band = LTE-NB1 BAND26(814MHz-824MHz) 5.1.1.1 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=3.75kHz 5.1.1.1.1 Test Channel = LCH 5.1.1.1.1.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 16 of 38 5.1.1.1.2 Test Channel = HCH 5.1.1.1.2.1 Test T size=1T 5.1.1.2 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=3.75kHz 5.1.1.2.1 Test Channel = LCH 5.1.1.2.1.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 17 of 38 5.1.1.2.2 Test Channel = HCH 5.1.1.2.2.1 Test T size=1T 5.1.1.3 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=15kHz 5.1.1.3.1 Test Channel = LCH 5.1.1.3.1.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 18 of 38 5.1.1.3.2 Test Channel = HCH 5.1.1.3.2.1 Test T size=1T 5.1.1.4 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz 5.1.1.4.1 Test Channel = LCH 5.1.1.4.1.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 19 of 38 5.1.1.4.1.2 Test T size=Full T 5.1.1.4.2 Test Channel = HCH 5.1.1.4.2.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 20 of 38 5.1.1.4.2.2 Test T size=Full T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 21 of 38
[
6 Spurious Emission at Antenna Terminal NOTE1: For the averaged unwanted emissions measurements, the measurement points in each sweep is greater than twice the Span/RBW in order to ensure bin-to-bin spacing of < RBW/2 so that narrowband signals are not lost between frequency bins. As to the present test item, the "Measurement Points = k *
(Span / RBW)" with k between 4 and 5, which results in an acceptable level error of less than 0.5 dB. NOTE2: only the worst case data displayed in this report. Part I - Test Plots 6.1 For LTE-NB1 6.1.1 Test Band = LTE-NB1 BAND26(814MHz-824MHz) 6.1.1.1 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=3.75kHz 6.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 22 of 38 6.1.1.1.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 23 of 38 6.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 24 of 38 6.1.1.2 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=3.75kHz 6.1.1.2.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 25 of 38 6.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 26 of 38 6.1.1.2.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 27 of 38 6.1.1.3 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=15kHz 6.1.1.3.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 28 of 38 6.1.1.3.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 29 of 38 6.1.1.3.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 30 of 38 6.1.1.4 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz 6.1.1.4.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 31 of 38 6.1.1.4.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 32 of 38 6.1.1.4.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 33 of 38 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 34 of 38 7 Field Strength of Spurious Radiation 7.1 For LTE-NB1 7.1.1 Test Band = LTE-NB1 BAND26(814MHz-824MHz) 7.1.1.1 Test Mode =LTE-NB1/ Sub-carrier spacing=3.75kHz 7.1.1.1.1 Test Channel = LCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 64.393333 104.246667 979.787500 1633.000000 3265.200000 6487.575000 63.926667 104.293333 633.929167 979.741667 1632.500000 3265.200000
-82.04
-77.99
-66.10
-57.74
-66.86
-65.14
-78.91
-83.98
-70.21
-60.82
-54.26
-67.17
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-69.04
-64.99
-53.10
-44.74
-53.86
-52.14
-65.91
-70.98
-57.21
-47.82
-41.26
-54.17 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal 7.1.1.1.2 Test Channel = MCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization
-82.18
-77.43
-69.22
-56.24
-65.61
-65.09
-78.37
-82.71
-61.43
-53.34
-68.28
-66.29
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-69.18
-64.43
-56.22
-43.24
-52.61
-52.09
-65.37
-69.71
-48.43
-40.34
-55.28
-53.29 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal 63.553333 104.293333 925.245833 1638.000000 3275.925000 6550.950000 63.693333 104.293333 655.150000 1638.000000 3456.300000 5937.187500 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 35 of 38 7.1.1.1.3 Test Channel = HCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 63.786667 124.966667 359.420000 1643.000000 3465.562500 7044.300000 63.086667 104.293333 657.120833 1643.000000 3286.162500 3465.562500 NOTE:
-82.59
-86.93
-86.29
-61.74
-67.38
-64.79
-77.78
-86.72
-65.79
-56.56
-65.57
-67.10
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-69.59
-73.93
-73.29
-48.74
-54.38
-51.79
-64.78
-73.72
-52.79
-43.56
-52.57
-54.10 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal 1) The disturbance above 13GHz and below 30MHz was very low, and the above harmonics were the highest point could be found when testing, so only the above harmonics had been displayed. 2) We have tested all modulation and all bandwidth, but only the worst case data presented in this report. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 36 of 38 8 Frequency Stability 8.1 Frequency Error VS. Voltage Test Band Test Mode Test Channel Test Temp. Test Volt. Freq. Error Freq. vs.
[Hz]
rated [ppm]
Verdict LCH TN TM1/15k MCH TN HCH TN LCH TN TM2/15k MCH TN HCH TN VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH 7.83 0.34
-4.73 8.10
-6.52 9.28
-1.51 3.73
-2.67 4.72
-9.30
-4.20
-2.65
-8.08
-9.32
-7.20
-1.00 2.68 0.009599 0.000417
-0.005805 0.009891
-0.007966 0.011327
-0.001830 0.004523
-0.003238 0.005787
-0.011410
-0.005146
-0.003232
-0.009867
-0.011378
-0.008737
-0.001218 0.003250 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS BAND26 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 37 of 38 8.2 Frequency Error VS. Temperature Test Band Test Mode Test Channel Test Volt. Test Temp. Freq. Error
[Hz]
Freq. vs. rated [ppm]
Verdict
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-1.98
-0.002429 1.84 3.55 0.002256 0.004358
-6.92
-0.008487 7.65 0.009379
-4.35
-0.005330
-4.37
-0.005354
-7.46
-0.009151 3.56 3.26 9.77 5.67 0.004371 0.003983 0.011930 0.006921
-2.89
-0.003528 6.73 0.008218
-3.37
-0.004116
-2.86
-0.003493
-7.42
-0.009063
-9.53
-0.011642 5.37 0.07 4.89 0.006518 0.000081 0.005934
-3.55
-0.004313 9.95 5.55 3.22 4.05 0.012082 0.006730 0.003911 0.004918
-0.05
-0.000062 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS LCH VN BAND26 TM1 15kHz MCH VN HCH VN This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Test Band Test Mode Test Channel Test Volt. Test Temp.
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50 LCH VN BAND26 TM2 15kHz MCH VN HCH VN The End Report No.: SZEM180400321702 Page: 38 of 38 Freq. Error
[Hz]
Freq. vs. rated [ppm]
Verdict
-1.03
-0.001264
-7.85
-0.009630 5.83 0.007153
-8.71
-0.010678
-1.11
-0.001367 0.36 9.46 0.000446 0.011606
-7.23
-0.008867
-8.09
-0.009922 0.38 1.63 0.000466 0.001994
-7.23
-0.008823 9.26 0.011305
-8.66
-0.010577 4.12 0.005036
-3.08
-0.003762
-9.39
-0.011466 2.30 0.002804
-1.00
-0.001215
-1.62
-0.001968 7.14 4.86 5.25 0.008666 0.005905 0.006377
-7.02
-0.008522
-0.30
-0.000364 4.57 0.005547
-8.52
-0.010341 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
| 1 2 3 4 5 | Reference test report part 14 | Test Report | 5.78 MiB | August 02 2019 / August 05 2019 |
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 1 of 38 Appendix B LTE-NB1 BAND26(824MHz-849MHz) This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 1 2 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 2 of 38 CONTENT Page EFFECTIVE (ISOTROPIC) RADIATED POWER OUTPUT DATA ............................................................ 3 PEAK-TO-AVERAGE RATIO ....................................................................................................................... 4 2.1 FOR LTE-NB1 .............................................................................................................................................. 4 2.1.1 Test Band = LTE-NB1 BAND26(824MHz-849MHz) ......................................................................... 4 3 MODULATION CHARACTERISTICS .......................................................................................................... 9 3.1 FOR LTE-NB1 .............................................................................................................................................. 9 3.1.1 Test Band = LTE-NB1 BAND26(824MHz-849MHz) ......................................................................... 9 4 BANDWIDTH ............................................................................................................................................... 11 4.1 FOR LTE-NB1 ............................................................................................................................................ 11 4.1.1 Test Band = LTE-NB1 BAND26(824MHz-849MHz) ....................................................................... 11 5 BAND EDGES COMPLIANCE ................................................................................................................... 15 5.1 FOR LTE-NB1 ............................................................................................................................................ 15 5.1.1 Test Band = LTE-NB1 BAND26(824MHz-849MHz) ....................................................................... 15 6 SPURIOUS EMISSION AT ANTENNA TERMINAL .................................................................................. 21 6.1 FOR LTE-NB1 ............................................................................................................................................ 21 6.1.1 Test Band = LTE-NB1 BAND26(824MHz-849MHz) ....................................................................... 21 7 FIELD STRENGTH OF SPURIOUS RADIATION ..................................................................................... 34 7.1 FOR LTE-NB1 ............................................................................................................................................ 34 7.1.1 Test Band = LTE-NB1 BAND26(824MHz-849MHz) ....................................................................... 34 8 FREQUENCY STABILITY .......................................................................................................................... 34 FREQUENCY ERROR VS. VOLTAGE ........................................................................................................... 36 FREQUENCY ERROR VS. TEMPERATURE .................................................................................................. 37 8.1 8.2 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 3 of 38 1 Effective (Isotropic) Radiated Power Output Data Effective Isotropic Radiated Power of Transmitter (EIRP) for LTE-NB1 BAND26 Test Band Test Mode Sub-carrier Spacing
(kHz) Test Number Measured channel of T
(dBm) ERP
(dBm) limit
(dBm) Verdict LCH TM1 3.75 MCH BAND26 HCH LCH TM2 3.75 MCH HCH 1T0 1T47 1T0 1T47 1T0 1T47 1T0 1T47 1T0 1T47 1T0 1T47 22.85 22.88 22.91 22.82 22.81 22.76 22.71 22.72 22.78 22.77 22.84 22.72 19.3 19.33 19.36 19.27 19.26 19.21 19.16 19.17 19.23 19.22 19.29 19.17 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS Test Band Test Mode Sub-carrier Spacin
(kHz) Test Number Measured channel of T
(dBm) ERP
(dBm) limit
(dBm) Verdict LCH TM1 15 MCH BAND26 HCH LCH TM2 15 MCH HCH 1T0 1T11 1T0 1T11 1T0 1T11 1T0 1T11 12T0 1T0 1T11 12T0 1T0 1T11 12T0 22.88 22.75 23.32 23.29 22.88 22.91 22.91 22.84 21.15 23.27 23.34 21.45 22.95 23 21.26 19.33 19.2 19.77 19.74 19.33 19.36 19.36 19.29 17.6 19.72 19.79 17.9 19.4 19.45 17.71 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS Note:
a: For getting the ERP (Efficient Radiated Power) in substitution method, the following formula should be taken to calculate it, ERP [dBm] = SGP [dBm] Cable Loss [dB] + Gain [dBd]
b: SGP=Signal Generator Level This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 4 of 38 2 Peak-to-Average Ratio Part I - Test Results Test Band Test Mode Test Channel Measured[dB]
Limit [dB]
Verdict TM1/1T BAND26 TM2/1T TM2/Full T Part II - Test Plots 2.1 For LTE-NB1 LCH MCH HCH LCH MCH HCH LCH MCH HCH 4.67 4.70 4.72 4.70 4.20 4.72 3.10 3.36 3.94 13 13 13 13 13 13 13 13 13 PASS PASS PASS PASS PASS PASS PASS PASS PASS 2.1.1 Test Band = LTE-NB1 BAND26(824MHz-849MHz) 2.1.1.1 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=15kHz.T size=1T0 2.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 5 of 38 2.1.1.1.2 Test Channel = MCH 2.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 6 of 38 2.1.1.2 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz.T size=1T0 2.1.1.2.1 Test Channel = LCH 2.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 7 of 38 2.1.1.2.3 Test Channel = HCH 2.1.1.3 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz.T size=12T0 2.1.1.3.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 8 of 38 2.1.1.3.2 Test Channel = MCH 2.1.1.3.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 9 of 38 3 Modulation Characteristics Part I - Test Plots 3.1 For LTE-NB1 3.1.1 Test Band = LTE-NB1 BAND26(824MHz-849MHz) 3.1.1.1 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=15kHz.T size=1T0 3.1.1.1.1 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 10 of 38 3.1.1.2 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz.T size=12T0 3.1.1.2.1 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 4 Bandwidth Part I - Test Results Test Band Test Mode Band 13 TM2/15kHz 4.1 For LTE-NB1 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 11 of 38 Test Occupied Bandwidth Emission Channel LCH MCH HCH
[kHz]
185.01 185.01 185.01 Bandwidth [kHz]
243.76 243.76 243.36 Verdict PASS PASS PASS 4.1.1 Test Band = LTE-NB1 BAND26(824MHz-849MHz) 4.1.1.1 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz.T size=12T0 4.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 12 of 38 4.1.1.1.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 13 of 38 4.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 14 of 38 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 15 of 38 5 Band Edges Compliance 5.1 For LTE-NB1 5.1.1 Test Band = LTE-NB1 BAND26(824MHz-849MHz) 5.1.1.1 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=3.75kHz 5.1.1.1.1 Test Channel = LCH 5.1.1.1.1.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 16 of 38 5.1.1.1.2 Test Channel = HCH 5.1.1.1.2.1 Test T size=1T 5.1.1.2 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=3.75kHz 5.1.1.2.1 Test Channel = LCH 5.1.1.2.1.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 17 of 38 5.1.1.2.2 Test Channel = HCH 5.1.1.2.2.1 Test T size=1T 5.1.1.3 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=15kHz 5.1.1.3.1 Test Channel = LCH 5.1.1.3.1.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 18 of 38 5.1.1.3.2 Test Channel = HCH 5.1.1.3.2.1 Test T size=1T 5.1.1.4 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz 5.1.1.4.1 Test Channel = LCH 5.1.1.4.1.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 19 of 38 5.1.1.4.1.2 Test T size=Full T 5.1.1.4.2 Test Channel = HCH 5.1.1.4.2.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 20 of 38 5.1.1.4.2.2 Test T size=Full T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 21 of 38
[
6 Spurious Emission at Antenna Terminal NOTE1: For the averaged unwanted emissions measurements, the measurement points in each sweep is greater than twice the Span/RBW in order to ensure bin-to-bin spacing of < RBW/2 so that narrowband signals are not lost between frequency bins. As to the present test item, the "Measurement Points = k *
(Span / RBW)" with k between 4 and 5, which results in an acceptable level error of less than 0.5 dB. NOTE2: only the worst case data displayed in this report. Part I - Test Plots 6.1 For LTE-NB1 6.1.1 Test Band = LTE-NB1 BAND26(824MHz-849MHz) 6.1.1.1 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=3.75kHz 6.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 22 of 38 6.1.1.1.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 23 of 38 6.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 24 of 38 6.1.1.2 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=3.75kHz 6.1.1.2.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 25 of 38 6.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 26 of 38 6.1.1.2.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 27 of 38 6.1.1.3 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=15kHz 6.1.1.3.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 28 of 38 6.1.1.3.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 29 of 38 6.1.1.3.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 30 of 38 6.1.1.4 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz 6.1.1.4.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 31 of 38 6.1.1.4.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 32 of 38 6.1.1.4.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 33 of 38 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 34 of 38 7 Field Strength of Spurious Radiation 7.1 For LTE-NB1 7.1.1 Test Band = LTE-NB1 BAND26(824MHz-849MHz) 7.1.1.1 Test Mode =LTE-NB1/ Sub-carrier spacing=3.75kHz 7.1.1.1.1 Test Channel = LCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 62.993333 104.293333 355.593333 1653.000000 3305.175000 6503.175000 63.180000 104.293333 260.860000 1653.000000 3306.150000 3485.550000
-82.38
-83.26
-86.15
-61.24
-68.37
-65.01
-77.48
-86.44
-87.38
-56.51
-64.34
-65.74
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-69.38
-70.26
-73.15
-48.24
-55.37
-52.01
-64.48
-73.44
-74.38
-43.51
-51.34
-52.74 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal 7.1.1.1.2 Test Channel = MCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 63.460000 104.293333 1003.500000 1673.000000 3346.125000 6583.612500 62.480000 104.293333 1003.500000 1673.000000 3526.012500 7917.900000
-82.11
-84.81
-61.31
-60.08
-66.00
-65.44
-77.77
-84.48
-55.07
-58.20
-68.03
-64.48
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-69.11
-71.81
-48.31
-47.08
-53.00
-52.44
-64.77
-71.48
-42.07
-45.20
-55.03
-51.48 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 35 of 38 7.1.1.1.3 Test Channel = HCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 64.440000 104.293333 358.393333 1693.000000 3386.100000 6476.850000 62.153333 104.293333 272.900000 1692.500000 3386.100000 6951.675000 NOTE:
-82.24
-84.88
-85.85
-63.10
-68.78
-65.12
-77.96
-89.14
-87.73
-64.13
-66.73
-65.39
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-69.24
-71.88
-72.85
-50.10
-55.78
-52.12
-64.96
-76.14
-74.73
-51.13
-53.73
-52.39 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal 1) The disturbance above 13GHz and below 30MHz was very low, and the above harmonics were the highest point could be found when testing, so only the above harmonics had been displayed. 2) We have tested all modulation and all bandwidth, but only the worst case data presented in this report. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 36 of 38 8 Frequency Stability 8.1 Frequency Error VS. Voltage Test Band Test Mode Test Channel Test Temp. Test Volt. Freq. Error Freq. vs.
[Hz]
rated [ppm]
Verdict LCH TN TM1/15k MCH TN HCH TN LCH TN TM2/15k MCH TN HCH TN VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH
-4.57
-6.35
-5.50 4.62 6.01 1.82 2.35 9.40 4.84 2.05 7.79 3.48
-7.97
-2.13
-4.94 4.77 8.37 4.45
-0.005550
-0.007702
-0.006671 0.005523 0.007188 0.002177 0.002773 0.011074 0.005698 0.002482 0.009453 0.004217
-0.009523
-0.002546
-0.005903 0.005621 0.009860 0.005237 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS BAND26 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 37 of 38 8.2 Frequency Error VS. Temperature Test Band Test Mode Test Channel Test Volt. Test Temp. Freq. Error
[Hz]
Freq. vs. rated [ppm]
Verdict
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-8.26
-0.010029 2.92 5.08 0.003540 0.006170
-9.05
-0.010976
-7.25
-0.008799
-3.76
-0.004561 3.24 0.003929
-5.82
-0.007067
-5.59
-0.006781 2.22 7.76 2.66 7.56 0.002657 0.009278 0.003175 0.009042
-6.62
-0.007919
-3.19
-0.003818
-2.33
-0.002786 0.48 0.13 0.000579 0.000154
-0.31
-0.000364 7.92 3.39 8.10 7.66 4.18 0.009326 0.003999 0.009545 0.009026 0.004927
-2.09
-0.002459
-7.23
-0.008518 1.73 0.002041 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS LCH VN BAND26 TM1 15kHz MCH VN HCH VN This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 38 of 38 Freq. vs. rated [ppm]
Verdict Test Band Test Mode Test Channel Test Volt. Test Temp.
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50 LCH VN BAND26 TM2 15kHz MCH VN HCH VN The End Freq. Error
[Hz]
0.62 4.18 0.000753 0.005078
-2.22
-0.002694
-7.24
-0.008789 1.91 0.002323
-6.66
-0.008083 4.61 0.005589
-5.84
-0.007090
-3.62
-0.004393 9.46 7.85 5.88 0.011310 0.009387 0.007034
-5.73
-0.006850 2.74 3.69 0.003274 0.004411
-3.83
-0.004584 1.06 0.001263
-0.83
-0.000995 7.99 0.009410
-0.77
-0.000908
-5.60
-0.006598 0.70 0.000822
-9.18
-0.010813 9.23 0.010872
-0.44
-0.000520
-7.13
-0.008402 1.94 0.002280 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
| 1 2 3 4 5 | Reference test report part 2 | Test Report | 3.17 MiB | August 02 2019 / August 05 2019 |
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 1 of 63 Appendix B GSM850 & GSM1900 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 2 of 63 CONTENT Page 1. EFFECTIVE (ISOTROPIC) RADIATED POWER OUTPUT DATA ................................................................................................ 4 1.1. Test Result ................................................................................................................................................. 4 2. PEAK-TO-AVERAGE RATIO .......................................................................................................................................... 5 2.1. Test Result ................................................................................................................................................. 5 2.2. Test Band = GSM 850 ............................................................................................................................. 5 2.2.1. Test Mode = GPRS 850 ...................................................................................................................... 5 2.2.1.1. Test Channel = LCH ........................................................................................................................ 5 2.2.1.2. Test Channel = MCH ....................................................................................................................... 6 2.2.1.3. Test Channel = HCH ........................................................................................................................ 6 2.2.2. Test Mode = EGPRS 850 .................................................................................................................... 7 2.2.2.1. Test Channel = LCH ........................................................................................................................ 7 2.2.2.2. Test Channel = MCH ....................................................................................................................... 7 2.2.2.3. Test Channel = HCH ........................................................................................................................ 8 2.3. Test Band = GSM 1900 ........................................................................................................................... 8 2.3.1. Test Mode = GPRS 1900 .................................................................................................................... 8 2.3.1.1. Test Channel = LCH ........................................................................................................................ 8 2.3.1.2. Test Channel = MCH ....................................................................................................................... 9 2.3.1.3. Test Channel = HCH ........................................................................................................................ 9 2.3.2. Test Mode = EGPRS 1900 ............................................................................................................... 10 2.3.2.1. Test Channel = LCH ...................................................................................................................... 10 2.3.2.2. Test Channel = MCH ..................................................................................................................... 10 2.3.2.3. Test Channel = HCH ...................................................................................................................... 11 3. MODULATION CHARACTERISTICS ............................................................................................................................... 12 3.1. For GSM ................................................................................................................................................... 12 3.1.1. Test BAND = GSM 850 ..................................................................................................................... 12 3.1.1.1. Test Mode = GSM/TM1 ................................................................................................................. 12 3.1.1.1.1. Test Channel = MCH ................................................................................................................. 12 3.1.1.2. Test Mode = GSM/TM2 ................................................................................................................. 13 3.1.1.2.1. Test Channel = MCH ................................................................................................................. 13 3.1.2. Test BAND = GSM 1900 ................................................................................................................... 13 3.1.2.1. Test Mode = GSM/TM1 ................................................................................................................. 13 3.1.2.1.1. Test Channel = MCH ................................................................................................................. 13 3.1.2.2. Test Mode = GSM/TM2 ................................................................................................................. 14 3.1.2.2.1. Test Channel = MCH ................................................................................................................. 14 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 3 of 63 4. 26DB BANDWIDTH AND OCCUPIED BANDWIDTH .......................................................................................................... 15 4.1. Test Result ............................................................................................................................................... 15 4.2. Test Plots ................................................................................................................................................. 15 5. BAND EDGE COMPLIANCE ........................................................................................................................................ 22 5.1. Test Plots ................................................................................................................................................. 22 6. SPURIOUS EMISSION AT ANTENNA TERMINAL .............................................................................................................. 26 6.1. Test Plots ................................................................................................................................................. 26 7. FIELD STRENGTH OF SPURIOUS RADIATION .................................................................................................................. 57 7.1. Test Band = GPRS 850 ......................................................................................................................... 57 7.1.1. Test Channel = LCH .......................................................................................................................... 57 7.1.2. Test Channel = MCH ......................................................................................................................... 57 7.1.3. Test Channel = HCH .......................................................................................................................... 58 7.2. Test Band = GPRS 1900 ....................................................................................................................... 58 7.2.1. Test Channel = LCH .......................................................................................................................... 58 7.2.2. Test Channel = MCH ......................................................................................................................... 59 7.2.3. Test Channel = HCH .......................................................................................................................... 59 8. FREQUENCY STABILITY ............................................................................................................................................. 60 8.1. Frequency Error Vs Voltage .................................................................................................................. 60 8.2. Frequency Error Vs Temperature ........................................................................................................ 61 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 4 of 63 1. Effective (Isotropic) Radiated Power Output Data 1.1. Test Result BAND Channel Power(dBm) ERP(dBm) Limit(dBm) Verdict GPRS850 GPRS850 GPRS850 EGPRS850 EGPRS850 EGPRS850 128 190 251 128 190 251 31.42 31.55 31.48 26.18 26.13 26.02 27.87 28.00 27.93 22.63 22.58 22.47 38.45 38.45 38.45 38.45 38.45 38.45 PASS PASS PASS PASS PASS PASS BAND Channel Power(dBm) EIRP(dBm) Limit(dBm) Verdict GPRS1900 GPRS1900 GPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 512 661 810 512 661 810 28.10 27.86 27.49 24.73 24.34 24.26 29.2 28.96 28.59 25.83 25.44 25.36 33 33 33 33 33 33 PASS PASS PASS PASS PASS PASS Note:
a: For getting the ERP (Efficient Radiated Power) in substitution method, the following formula should be taken to calculate it, ERP [dBm] = SGP [dBm] Cable Loss [dB] + Gain [dBd]
EIRP [dBm] = SGP [dBm] Cable Loss [dB] + Gain [dBi]
b: SGP=Signal Generator Level This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 5 of 63 2. Peak-to-Average Ratio 2.1. Test Result BAND Channel GPRS850 GPRS850 GPRS850 EGPRS850 EGPRS850 EGPRS850 GPRS1900 GPRS1900 GPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 128 190 251 128 190 251 512 661 810 512 661 810 2.2. Test Band = GSM 850 2.2.1. Test Mode = GPRS 850 2.2.1.1. Test Channel = LCH Peak-to-Average Ratio(dB) Limit(dBm) Verdict 8.17 8.06 8.06 10.64 10.61 11.07 8.14 8.26 8.29 10.99 11.13 11.04 13 13 13 13 13 13 13 13 13 13 13 13 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:52:03 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 6 of 63 2.2.1.2. Test Channel = MCH 2.2.1.3. Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:52:28Date: 7.JUL.2018 13:52:52 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 7 of 63 2.2.2. Test Mode = EGPRS 850 2.2.2.1. Test Channel = LCH 2.2.2.2. Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 14:02:18Date: 7.JUL.2018 14:02:44 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 8 of 63 2.2.2.3. Test Channel = HCH 2.3. Test Band = GSM 1900 2.3.1. Test Mode = GPRS 1900 2.3.1.1. Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 14:03:09Date: 7.JUL.2018 13:29:33 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 9 of 63 2.3.1.2. Test Channel = MCH 2.3.1.3. Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:29:58Date: 7.JUL.2018 13:30:22 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 10 of 63 2.3.2. Test Mode = EGPRS 1900 2.3.2.1. Test Channel = LCH 2.3.2.2. Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:42:56Date: 7.JUL.2018 13:43:21 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 11 of 63 2.3.2.3. Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:43:47 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 12 of 63 3. Modulation Characteristics 3.1. For GSM 3.1.1. Test BAND = GSM 850 3.1.1.1. Test Mode = GSM/TM1 3.1.1.1.1. Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 13 of 63 3.1.1.2. Test Mode = GSM/TM2 3.1.1.2.1. Test Channel = MCH 3.1.2. Test BAND = GSM 1900 3.1.2.1. Test Mode = GSM/TM1 3.1.2.1.1. Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 14 of 63 3.1.2.2. Test Mode = GSM/TM2 3.1.2.2.1. Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 15 of 63 4. 26dB Bandwidth and Occupied Bandwidth 4.1. Test Result BAND Channel GPRS850 GPRS850 GPRS850 EGPRS850 EGPRS850 EGPRS850 GPRS1900 GPRS1900 GPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 128 190 251 128 190 251 512 661 810 512 661 810 4.2. Test Plots Occupied Bandwidth 26dB Bandwidth
(kHz) 246.02 241.68 244.57 244.57 246.02 243.13 246.02 241.68 246.02 244.57 243.13 240.23
(kHz) 314.49 298.55 313.04 291.30 295.65 295.65 304.35 305.80 295.65 302.90 294.20 291.30 GPRS850_128 Limit(kHz) Verdict
---
---
---
---
---
---
---
---
---
---
---
---
PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS GPRS850_190 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:47:57 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 16 of 63 GPRS850_251 EGPRS850_128 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:48:19Date: 7.JUL.2018 13:48:41 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 17 of 63 EGPRS850_190 EGPRS850_251 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:57:42Date: 7.JUL.2018 13:58:07 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 18 of 63 GPRS1900_512 GPRS1900_661 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:58:32Date: 7.JUL.2018 13:24:24 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 19 of 63 GPRS1900_810 EGPRS1900_512 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:24:47Date: 7.JUL.2018 13:25:09 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 20 of 63 EGPRS1900_661 EGPRS1900_810 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:37:14Date: 7.JUL.2018 13:37:39 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 21 of 63 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:38:04 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 22 of 63 5. Band Edge Compliance 5.1. Test Plots GPRS850_128 GPRS850_251 EGPRS850_128 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:49:12Date: 7.JUL.2018 13:49:43 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 23 of 63 EGPRS850_251 GPRS1900_512 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:59:02Date: 7.JUL.2018 13:59:33 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 24 of 63 GPRS1900_810 EGPRS1900_512 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:25:40Date: 7.JUL.2018 13:26:11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 25 of 63 EGPRS1900_810 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:38:34Date: 7.JUL.2018 13:39:05 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 26 of 63 6. Spurious Emission at Antenna Terminal NOTE1: For the averaged unwanted emissions measurements, the measurement points in each sweep is greater than twice the Span/RBW in order to ensure bin-to-bin spacing of < RBW/2 so that narrowband signals are not lost between frequency bins. As to the present test item, the "Measurement Points = k *
(Span / RBW)" with k between 4 and 5, which results in an acceptable level error of less than 0.5 dB. NOTE2: only the worst case data displayed in this report. 6.1. Test Plots GPRS850_128 GPRS850_128 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:49:56 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 27 of 63 GPRS850_128 GPRS850_128 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:50:04Date: 7.JUL.2018 13:50:14 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 28 of 63 GPRS850_190 GPRS850_190 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:50:22Date: 7.JUL.2018 13:50:34 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 29 of 63 GPRS850_190 GPRS850_190 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:50:43Date: 7.JUL.2018 13:50:52 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 30 of 63 GPRS850_251 GPRS850_251 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:51:01Date: 7.JUL.2018 13:51:13 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 31 of 63 GPRS850_251 GPRS850_251 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:51:21Date: 7.JUL.2018 13:51:31 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 32 of 63 EGPRS850_128 EGPRS850_128 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:51:39Date: 7.JUL.2018 13:59:49 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 33 of 63 EGPRS850_128 EGPRS850_128 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:59:58Date: 7.JUL.2018 14:00:09 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 34 of 63 EGPRS850_190 EGPRS850_190 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 14:00:18Date: 7.JUL.2018 14:00:34 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 35 of 63 EGPRS850_190 EGPRS850_190 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 14:00:43Date: 7.JUL.2018 14:00:53 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 36 of 63 EGPRS850_251 EGPRS850_251 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 14:01:02Date: 7.JUL.2018 14:01:18 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 37 of 63 EGPRS850_251 EGPRS850_251 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 14:01:27Date: 7.JUL.2018 14:01:38 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 38 of 63 GPRS1900_512 GPRS1900_512 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 14:01:54Date: 7.JUL.2018 13:26:24 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 39 of 63 GPRS1900_512 GPRS1900_512 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:26:40Date: 7.JUL.2018 13:26:49 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 40 of 63 GPRS1900_512 GPRS1900_512 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:26:58Date: 7.JUL.2018 13:27:07 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 41 of 63 GPRS1900_661 GPRS1900_661 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:27:16Date: 7.JUL.2018 13:27:28 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 42 of 63 GPRS1900_661 GPRS1900_661 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:27:36Date: 7.JUL.2018 13:27:45 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 43 of 63 GPRS1900_661 GPRS1900_661 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:27:55Date: 7.JUL.2018 13:28:04 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 44 of 63 GPRS1900_810 GPRS1900_810 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:28:12Date: 7.JUL.2018 13:28:25 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 45 of 63 GPRS1900_810 GPRS1900_810 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:28:33Date: 7.JUL.2018 13:28:42 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 46 of 63 GPRS1900_810 GPRS1900_810 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:28:52Date: 7.JUL.2018 13:29:00 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 47 of 63 EGPRS1900_512 EGPRS1900_512 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:29:09Date: 7.JUL.2018 13:39:21 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 48 of 63 EGPRS1900_512 EGPRS1900_512 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:39:38Date: 7.JUL.2018 13:39:47 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 49 of 63 EGPRS1900_512 EGPRS1900_512 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:39:57Date: 7.JUL.2018 13:40:06 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 50 of 63 EGPRS1900_661 EGPRS1900_661 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:40:15Date: 7.JUL.2018 13:40:30 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 51 of 63 EGPRS1900_661 EGPRS1900_661 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:40:39Date: 7.JUL.2018 13:40:48 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 52 of 63 EGPRS1900_661 EGPRS1900_661 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:40:58Date: 7.JUL.2018 13:41:07 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 53 of 63 EGPRS1900_810 EGPRS1900_810 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:41:23Date: 7.JUL.2018 13:41:39 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 54 of 63 EGPRS1900_810 EGPRS1900_810 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:41:55Date: 7.JUL.2018 13:42:04 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 55 of 63 EGPRS1900_810 EGPRS1900_810 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:42:14Date: 7.JUL.2018 13:42:23 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 56 of 63 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Date: 7.JUL.2018 13:42:32 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 57 of 63 7. Field Strength of Spurious Radiation 7.1. Test Band = GPRS 850 7.1.1. Test Channel = LCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 60.797500 104.302000 450.010000 1752.825000 2472.900000 4694.350000 61.137000 633.485500 1648.275000 2472.975000 3734.650000 6506.650000
-73.89
-77.36
-69.44
-37.57
-46.70
-55.74
-67.98
-67.82
-46.68
-46.35
-56.42
-53.60 7.1.2. Test Channel = MCH
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-60.89
-64.36
-56.44
-24.57
-33.70
-42.74
-54.98
-54.82
-33.68
-33.35
-43.42
-40.60 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 62.883000 104.253500 437.497000 1899.300000 2509.800000 6510.150000 62.349500 595.219000 1673.100000 2510.025000 4339.100000
-73.65
-75.03
-69.31
-37.90
-45.42
-53.01
-69.10
-63.19
-45.76
-46.65
-56.37
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-60.65
-62.03
-56.31
-24.90
-32.42
-40.01
-56.10
-50.19
-32.76
-33.65
-43.37 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 58 of 63 6468.500000
-53.15
-13.00
-40.15 Horizontal 7.1.3. Test Channel = HCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 62.107000 104.253500 550.017000 1697.400000 2472.975000 6059.000000 61.185500 412.471000 1051.375000 1697.625000 2609.700000 5152.850000
-73.70
-74.53
-70.21
-49.13
-46.02
-53.37
-69.13
-71.12
-56.78
-45.58
-47.82
-54.99 7.2. Test Band = GPRS 1900 7.2.1. Test Channel = LCH
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-60.70
-61.53
-57.21
-36.13
-33.02
-40.37
-56.13
-58.12
-43.78
-32.58
-34.82
-41.99 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 56.723500 450.010000 1265.300000 3700.700000 5550.800000 10065.600000 61.282500 424.984000 1075.300000 3699.650000 5550.450000 7913.650000
-76.43
-70.05
-55.23
-54.34
-51.64
-50.72
-68.41
-72.50
-50.20
-52.16
-50.16
-51.75
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-63.43
-57.05
-42.23
-41.34
-38.64
-37.72
-55.41
-59.50
-37.20
-39.16
-37.16
-38.75 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 59 of 63 7.2.2. Test Channel = MCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 60.409500 767.976000 1249.300000 3759.500000 5640.050000 10276.000000 60.021500 768.073000 1440.200000 5116.450000 7994.150000 10612.400000
-75.41
-65.39
-55.12
-56.41
-52.49
-51.44
-69.69
-61.52
-47.39
-53.68
-51.82
-50.69 7.2.3. Test Channel = HCH
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-62.41
-52.39
-42.12
-43.41
-39.49
-38.44
-56.69
-48.52
-34.39
-40.68
-38.82
-37.69 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 62.495000 450.010000 768.073000 3819.700000 5967.300000 10024.400000 61.670500 449.961500 768.073000 1401.600000 3819.000000 6139.150000 NOTE:
-74.22
-68.83
-65.06
-54.48
-53.48
-51.21
-69.19
-69.53
-61.67
-47.56
-51.89
-52.27
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-61.22
-55.83
-52.06
-41.48
-40.48
-38.21
-56.19
-56.53
-48.67
-34.56
-38.89
-39.27 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 60 of 63 1) All modes were tested, but the data presented above is the worst case.the disturbance above 13GHz and below 30MHz was very low, and the above harmonics were the highest point could be found when testing, so only the above harmonics had been displayed. 8. Frequency Stability 8.1. Frequency Error Vs Voltage BAND Channel Voltage
(Vdc) GPRS850 GPRS850 GPRS850 GPRS850 GPRS850 GPRS850 GPRS850 GPRS850 GPRS850 EGPRS850 EGPRS850 EGPRS850 EGPRS850 EGPRS850 EGPRS850 EGPRS850 EGPRS850 EGPRS850 GPRS1900 GPRS1900 GPRS1900 GPRS1900 GPRS1900 GPRS1900 GPRS1900 GPRS1900 GPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 128 128 128 190 190 190 251 251 251 128 128 128 190 190 190 251 251 251 512 512 512 661 661 661 810 810 810 512 512 512 661 661 661 810 810 810 VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH Voltage Temperature Deviation
() TN TN TN TN TN TN TN TN TN TN TN TN TN TN TN TN TN TN TN TN TN TN TN TN TN TN TN TN TN TN TN TN TN TN TN TN
(Hz) 17.11 19.98 23.76 19.53 23.31 22.02 21.31 20.40 22.24 18.18 23.47 24.60 19.50 19.50 23.83 23.37 23.89 21.50 7.23 13.85 18.27 16.30 9.49 9.27 7.26 18.21 17.43 6.20 14.30 16.79 8.01 10.30 12.85 13.88 18.31 15.85 Deviation
(ppm) 0.020761 0.024248 0.028831 0.023348 0.027863 0.026320 0.025104 0.024039 0.026208 0.022054 0.028478 0.029849 0.023309 0.023309 0.028481 0.027539 0.028147 0.025333 0.003909 0.007486 0.009877 0.008673 0.005049 0.004929 0.003804 0.009535 0.009129 0.003350 0.007730 0.009074 0.004259 0.005478 0.006835 0.007269 0.009585 0.008301 Limit
(ppm) Verdict 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 61 of 63 8.2. Frequency Error Vs Temperature BAND Channel Voltage
(Vdc) GPRS850 GPRS850 GPRS850 GPRS850 GPRS850 GPRS850 GPRS850 GPRS850 GPRS850 GPRS850 GPRS850 GPRS850 GPRS850 GPRS850 GPRS850 GPRS850 GPRS850 GPRS850 GPRS850 GPRS850 GPRS850 GPRS850 GPRS850 GPRS850 GPRS850 GPRS850 GPRS850 EGPRS850 EGPRS850 EGPRS850 EGPRS850 EGPRS850 EGPRS850 EGPRS850 EGPRS850 EGPRS850 EGPRS850 EGPRS850 EGPRS850 EGPRS850 EGPRS850 EGPRS850 EGPRS850 128 128 128 128 128 128 128 128 128 190 190 190 190 190 190 190 190 190 251 251 251 251 251 251 251 251 251 128 128 128 128 128 128 128 128 128 190 190 190 190 190 190 190 VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN Temperature Temperature Deviation
()
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30
(Hz) 22.50 22.60 21.31 20.99 22.86 22.83 20.34 22.99 21.99 19.63 21.92 22.73 21.34 21.92 20.89 20.86 21.34 20.99 20.79 21.15 22.86 22.08 21.95 23.92 19.95 22.12 21.18 25.54 24.54 24.31 24.15 25.09 24.44 25.60 25.93 22.44 25.57 25.96 25.73 22.47 24.25 25.31 22.57 Deviation
(ppm) 0.027303 0.027421 0.025854 0.025462 0.027734 0.027695 0.024679 0.027891 0.026676 0.023464 0.026204 0.027169 0.025509 0.026204 0.024969 0.024930 0.025509 0.025085 0.024496 0.024914 0.026930 0.026017 0.025865 0.028185 0.023507 0.026055 0.024952 0.030985 0.029771 0.029497 0.029301 0.030437 0.029653 0.031064 0.031455 0.027225 0.030565 0.031028 0.030758 0.026860 0.028982 0.030256 0.026976 Limit
(ppm) Verdict 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. EGPRS850 EGPRS850 EGPRS850 EGPRS850 EGPRS850 EGPRS850 EGPRS850 EGPRS850 EGPRS850 EGPRS850 EGPRS850 GPRS1900 GPRS1900 GPRS1900 GPRS1900 GPRS1900 GPRS1900 GPRS1900 GPRS1900 GPRS1900 GPRS1900 GPRS1900 GPRS1900 GPRS1900 GPRS1900 GPRS1900 GPRS1900 GPRS1900 GPRS1900 GPRS1900 GPRS1900 GPRS1900 GPRS1900 GPRS1900 GPRS1900 GPRS1900 GPRS1900 GPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 190 190 251 251 251 251 251 251 251 251 251 512 512 512 512 512 512 512 512 512 661 661 661 661 661 661 661 661 661 810 810 810 810 810 810 810 810 810 512 512 512 512 512 512 512 512 512 661 661 VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 62 of 63 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20 25.47 25.80 23.50 23.37 20.92 22.12 22.73 24.31 24.89 24.25 24.80 15.21 17.66 17.72 17.21 15.21 15.53 20.86 19.37 12.40 11.01 9.85 6.20 10.53 8.10 6.52 7.43 10.65 6.65 14.50 15.95 14.63 17.08 13.40 16.21 17.40 13.50 12.85 13.37 19.95 18.31 15.98 15.69 8.78 18.14 10.69 8.17 14.88 12.82 0.030449 0.030835 0.027691 0.027539 0.024648 0.026055 0.026778 0.028642 0.029327 0.028566 0.029212 0.008219 0.009545 0.009580 0.009301 0.008219 0.008393 0.011273 0.010470 0.006701 0.005856 0.005238 0.003297 0.005599 0.004311 0.003469 0.003950 0.005667 0.003538 0.007591 0.008351 0.007658 0.008943 0.007016 0.008486 0.009112 0.007066 0.006728 0.007224 0.010784 0.009894 0.008638 0.008481 0.004746 0.009807 0.005776 0.004415 0.007917 0.006818 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. EGPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 EGPRS1900 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321701 Page: 63 of 63 661 661 661 661 661 661 661 810 810 810 810 810 810 810 810 810 VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN VN
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50 16.43 11.66 12.30 18.34 11.88 16.30 14.56 16.18 16.08 19.15 19.24 15.66 17.98 20.02 16.79 15.24 The End 0.008741 0.006200 0.006543 0.009754 0.006320 0.008673 0.007745 0.008470 0.008419 0.010025 0.010076 0.008199 0.009416 0.010481 0.008791 0.007979 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
| 1 2 3 4 5 | Reference test report part 3 | Test Report | 2.27 MiB | August 02 2019 / August 05 2019 |
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 1 of 36 Appendix B LTE-M1 BAND 2 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 1 2 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 2 of 36 CONTENT Page EFFECTIVE (ISOTROPIC) RADIATED POWER OUTPUT DATA ............................................................3 PEAK-TO-AVERAGE RATIO ........................................................................................................................7 2.1 FOR LTE-M1 .................................................................................................................................................7 2.1.1 Test Band = LTE-M1 BAND2 ................................................................................................................7 3 MODULATION CHARACTERISTICS ........................................................................................................14 3.1 FOR LTE-M1 ...............................................................................................................................................14 3.1.1 Test Band = LTE-M1 BAND2 ..............................................................................................................14 4 BANDWIDTH ................................................................................................................................................16 4.1 FOR LTE ......................................................................................................................................................16 4.1.1 Test Band = LTE-M1 BAND2 ..............................................................................................................16 5 BAND EDGES COMPLIANCE ....................................................................................................................23 5.1 FOR LTE-M1 ...............................................................................................................................................23 5.1.1 Test Band = LTE-M1 BAND2 ..............................................................................................................23 6 SPURIOUS EMISSION AT ANTENNA TERMINAL ..................................................................................28 6.1 FOR LTE-M1 ...............................................................................................................................................28 6.1.1 Test Band = LTE-M1 BAND2 ..............................................................................................................28 7 FIELD STRENGTH OF SPURIOUS RADIATION .....................................................................................32 7.1 FOR LTE-M1 ...............................................................................................................................................32 7.1.1 Test Band = LTE-M1 BAND2 ..............................................................................................................32 8 FREQUENCY STABILITY ...........................................................................................................................34 8.1 8.2 FREQUENCY ERROR VS. VOLTAGE ............................................................................................................34 FREQUENCY ERROR VS. TEMPERATURE ...................................................................................................35 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 3 of 36 1 Effective (Isotropic) Radiated Power Output Data Test Band(LTE) Test Test channel Test Mode Bandwidth Effective Isotropic Radiated Power of Transmitter (EIRP) for LTE-M1 BAND 2 EIRP
(dBm) 24.02 23.91 22.14 24.12 24.07 22.27 24.34 24.44 22.28 Test RB Measured
(dBm) 22.92 RB1#0 RB1#5 22.81 21.04 RB6#0 23.02 RB1#0 22.97 RB1#5 RB6#0 21.17 23.24 RB1#0 23.34 RB1#5 RB6#0 21.18 M1/TM1 MCH 1.4M HCH LCH LTE-
BAND2 Test Band(LTE) Test Mode Test Bandwidth Test channel LCH BAND2 LTE-
M1/TM2 1.4M MCH HCH Test Band(LTE) Test Mode Test Bandwidth Test channel LCH BAND2 LTE-
M1/TM1 3M MCH HCH Test Band(LTE) Test Mode Test Bandwidth Test channel BAND2 LTE-
M1/TM2 3M LCH MCH Test RB Measured
(dBm) 22.21 RB1#0 22.26 RB1#5 21.03 RB6#0 RB1#0 22.44 22.55 RB1#5 21.1 RB6#0 22.45 RB1#0 RB1#5 22.59 21.07 RB6#0 Test RB Measured
(dBm) 23.07 RB1#0 23.1 RB1#5 RB6#0 21.11 23.21 RB1#0 23.23 RB1#5 21.24 RB6#0 RB1#0 23.24 23.25 RB1#5 RB6#0 21.17 Test RB Measured
(dBm) 22.3 RB1#0 RB1#5 22.19 21.12 RB6#0 22.45 RB1#0 RB1#5 22.5 EIRP
(dBm) 23.31 23.36 22.13 23.54 23.65 22.2 23.55 23.69 22.17 EIRP
(dBm) 24.17 24.2 22.21 24.31 24.33 22.34 24.34 24.35 22.27 EIRP
(dBm) 23.4 23.29 22.22 23.55 23.6 limit
(dBm) Verdict PASS 33.00 33.00 PASS PASS 33.00 PASS 33.00 PASS 33.00 33.00 PASS PASS 33.00 PASS 33.00 33.00 PASS limit
(dBm) Verdict PASS 33.00 PASS 33.00 PASS 33.00 33.00 PASS PASS 33.00 PASS 33.00 PASS 33.00 33.00 PASS PASS 33.00 limit
(dBm) Verdict PASS 33.00 PASS 33.00 33.00 PASS PASS 33.00 PASS 33.00 PASS 33.00 33.00 PASS PASS 33.00 33.00 PASS limit
(dBm) Verdict PASS 33.00 33.00 PASS PASS 33.00 PASS 33.00 33.00 PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 4 of 36 HCH RB6#0 RB1#0 RB1#5 RB6#0 21.08 22.49 22.53 21.16 Test Band(LTE) Test Mode Test Bandwidth Test channel LCH BAND2 LTE-
M1/TM1 5M MCH HCH Test Band(LTE) Test Mode Test Bandwidth Test channel LCH BAND2 LTE-
M1/TM2 5M MCH HCH Test Band(LTE) Test Mode Test Bandwidth Test channel LCH BAND2 LTE-
M1/TM1 10M MCH HCH Test Band(LTE) Test Mode Test Bandwidth Test channel BAND2 LTE-
M1/TM2 10M LCH MCH Test RB Measured
(dBm) 22.99 RB1#0 RB1#5 22.91 22.05 RB6#0 23.23 RB1#0 23.26 RB1#5 RB6#0 22.36 23.18 RB1#0 23.22 RB1#5 RB6#0 22.2 Test RB Measured
(dBm) RB1#0 22.44 22.51 RB1#5 21.01 RB6#0 22.64 RB1#0 RB1#5 22.67 21.16 RB6#0 22.71 RB1#0 22.6 RB1#5 RB6#0 21.35 Test RB Measured
(dBm) RB1#0 22.99 22.99 RB1#5 22.03 RB6#0 RB1#0 23.23 23.23 RB1#5 22.28 RB6#0 23.13 RB1#0 RB1#5 23.12 22.19 RB6#0 Test RB Measured
(dBm) 22.46 RB1#0 22.48 RB1#5 RB6#0 21.21 22.63 RB1#0 22.64 RB1#5 RB6#0 21.18 22.18 23.59 23.63 22.26 EIRP
(dBm) 24.09 24.01 23.15 24.33 24.36 23.46 24.28 24.32 23.3 EIRP
(dBm) 23.54 23.61 22.11 23.74 23.77 22.26 23.81 23.7 22.45 EIRP
(dBm) 24.09 24.09 23.13 24.33 24.33 23.38 24.23 24.22 23.29 EIRP
(dBm) 23.56 23.58 22.31 23.73 23.74 22.28 33.00 33.00 33.00 33.00 PASS PASS PASS PASS limit
(dBm) Verdict PASS 33.00 33.00 PASS PASS 33.00 PASS 33.00 PASS 33.00 33.00 PASS PASS 33.00 PASS 33.00 33.00 PASS limit
(dBm) Verdict 33.00 PASS PASS 33.00 PASS 33.00 PASS 33.00 33.00 PASS PASS 33.00 PASS 33.00 PASS 33.00 33.00 PASS limit
(dBm) Verdict 33.00 PASS PASS 33.00 PASS 33.00 33.00 PASS PASS 33.00 PASS 33.00 PASS 33.00 33.00 PASS PASS 33.00 limit
(dBm) Verdict PASS 33.00 PASS 33.00 33.00 PASS PASS 33.00 PASS 33.00 33.00 PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 5 of 36 HCH RB1#0 RB1#5 RB6#0 22.53 22.54 21.14 23.63 23.64 22.24 33.00 33.00 33.00 PASS PASS PASS Test Band(LTE) Test Mode Test Bandwidth Test channel LCH BAND2 LTE-
M1/TM1 15M MCH HCH Test Band(LTE) Test Mode Test Bandwidth Test channel LCH BAND2 LTE-
M1/TM2 15M MCH HCH Test Band(LTE) Test Mode Test Bandwidth Test channel LCH BAND2 LTE-
M1/TM1 20M MCH HCH Test Band(LTE) Test Mode Test Bandwidth Test channel BAND2 LTE-
M1/TM2 20M LCH MCH HCH Test RB Measured
(dBm) 23.17 RB1#0 23.08 RB1#5 RB6#0 23.08 23.21 RB1#0 23.12 RB1#5 23.15 RB6#0 RB1#0 23.09 23.03 RB1#5 RB6#0 23.07 Test RB Measured
(dBm) 22.39 RB1#0 RB1#5 22.35 22.98 RB6#0 22.61 RB1#0 22.62 RB1#5 RB6#0 23.14 22.46 RB1#0 22.51 RB1#5 RB6#0 23.02 23 Test RB Measured
(dBm) 22.96 RB1#0 RB1#5 23.02 RB6#0 RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 22.97 22.91 22.97 22.99 23.03 23.11 Test RB Measured
(dBm) RB1#0 22.46 22.53 RB1#5 23.07 RB6#0 RB1#0 22.43 22.38 RB1#5 23.02 RB6#0 RB1#0 22.56 EIRP
(dBm) 24.27 24.18 24.18 24.31 24.22 24.25 24.19 24.13 24.17 EIRP
(dBm) 23.49 23.45 24.08 23.71 23.72 24.24 23.56 23.61 24.12 EIRP
(dBm) 24.06 24.12 24.1 24.07 24.01 24.07 24.09 24.13 24.21 EIRP
(dBm) 23.56 23.63 24.17 23.53 23.48 24.12 23.66 limit
(dBm) Verdict PASS 33.00 PASS 33.00 33.00 PASS PASS 33.00 PASS 33.00 PASS 33.00 33.00 PASS PASS 33.00 33.00 PASS limit
(dBm) Verdict PASS 33.00 33.00 PASS PASS 33.00 PASS 33.00 PASS 33.00 33.00 PASS PASS 33.00 PASS 33.00 33.00 PASS limit
(dBm) Verdict PASS 33.00 33.00 PASS PASS 33.00 PASS 33.00 33.00 PASS PASS 33.00 PASS 33.00 PASS 33.00 33.00 PASS limit
(dBm) Verdict 33.00 PASS PASS 33.00 PASS 33.00 33.00 PASS PASS 33.00 PASS 33.00 33.00 PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 6 of 36 Note:
a: For getting the EIRP (Efficient Isotropic Radiated Power) in substitution method, the following formula should be taken to calculate it, RB1#5 RB6#0 22.51 23.15 23.61 24.25 33.00 33.00 PASS PASS EIRP [dBm] = SGP [dBm] Cable Loss [dB] + Gain [dBi]
b: SGP=Signal Generator Level This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 7 of 36 2 Peak-to-Average Ratio Part I - Test Results Test Band Test Mode Test Channel Measured[dB]
Limit [dB]
Band 2 TM1/5M Full RB TM1/5M 1 RB TM2/5M Full RB TM2/5M 1 RB LCH MCH HCH LCH MCH HCH LCH MCH HCH LCH MCH HCH 4.93 5.04 4.23 4.32 4.55 4.32 4.96 6.38 6.20 5.30 4.84 4.84 13 13 13 13 13 13 13 13 13 13 13 13 Verdict PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS Part II - Test Plots 2.1 For LTE-M1 2.1.1 Test Band = LTE-M1 BAND2 2.1.1.1 Test Mode = LTE-M1/TM1.Bandwidth=5MHz Full RB 2.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 8 of 36 2.1.1.1.2 Test Channel = MCH 2.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 9 of 36 2.1.1.2 Test Mode = LTE-M1/TM1.Bandwidth=5MHz 1 RB 2.1.1.2.1 Test Channel = LCH 2.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 10 of 36 2.1.1.2.3 Test Channel = HCH 2.1.1.3 Test Mode = LTE-M1/TM2.Bandwidth=5MHz Full RB 2.1.1.3.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 11 of 36 2.1.1.3.2 Test Channel = MCH 2.1.1.3.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 12 of 36 2.1.1.4 Test Mode = LTE-M1/TM2.Bandwidth=5MHz 1 RB 2.1.1.4.1 Test Channel = LCH 2.1.1.4.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 13 of 36 2.1.1.4.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 14 of 36 3 Modulation Characteristics Part I - Test Plots 3.1 For LTE-M1 3.1.1 Test Band = LTE-M1 BAND2 3.1.1.1 Test Mode = LTE-M1 /TM1 5MHz 3.1.1.1.1 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 15 of 36 3.1.1.2 Test Mode = LTE-M1 /TM2 5MHz 3.1.1.2.1 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 4 Bandwidth Part I - Test Results Test Band Test Mode BAND2 TM1/ 5MHz TM2/ 5MHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 16 of 36 Test Channel LCH MCH HCH LCH MCH HCH Occupied Bandwidth
[MHz]
1.10 1.10 1.11 1.13 1.13 1.13 Emission Bandwidth [MHz]
1.41 1.39 1.38 1.48 1.46 1.40 Verdict PASS PASS PASS PASS PASS PASS 4.1 For LTE 4.1.1 Test Band = LTE-M1 BAND2 4.1.1.1 Test Mode = LTE-M1/TM1 5MHz 4.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 17 of 36 4.1.1.1.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 18 of 36 4.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 19 of 36 4.1.1.2 Test Mode = LTE-M1/TM2 5MHz 4.1.1.2.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 20 of 36 4.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 21 of 36 4.1.1.2.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 22 of 36 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 23 of 36 5 Band Edges Compliance 5.1 For LTE-M1 5.1.1 Test Band = LTE-M1 BAND2 5.1.1.1 Test Mode = LTE-M1/TM1 5MHz 5.1.1.1.1 Test Channel = LCH 5.1.1.1.1.1 Test RB=1RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 24 of 36 5.1.1.1.1.2 Test RB=6RB 5.1.1.1.2 Test Channel = HCH 5.1.1.1.2.1 Test RB=1RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 25 of 36 5.1.1.1.2.2 Test RB=6RB 5.1.1.2 Test Mode = LTE-M1/TM2 5MHz 5.1.1.2.1 Test Channel = LCH 5.1.1.2.1.1 Test RB=1RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Test RB=6RB SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 26 of 36 5.1.1.2.2 Test Channel = HCH 5.1.1.2.2.1 Test RB=1RB 5.1.1.2.2.2 Test RB=6RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 27 of 36 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 28 of 36
[
6 Spurious Emission at Antenna Terminal NOTE1: For the averaged unwanted emissions measurements, the measurement points in each sweep is greater than twice the Span/RBW in order to ensure bin-to-bin spacing of < RBW/2 so that narrowband signals are not lost between frequency bins. As to the present test item, the "Measurement Points = k *
(Span / RBW)" with k between 4 and 5, which results in an acceptable level error of less than 0.5 dB. NOTE2: only the worst case data displayed in this report. Part I - Test Plots 6.1 For LTE-M1 6.1.1 Test Band = LTE-M1 BAND2 6.1.1.1 Test Mode = LTE-M1 / TM1 5MHz RB1#0 6.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 29 of 36 6.1.1.1.2 Test Channel = MCH 6.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 30 of 36 6.1.1.2 Test Mode = LTE-M1 / TM2 5MHz RB1#0 6.1.1.2.1 Test Channel = LCH 6.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 31 of 36 6.1.1.2.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 32 of 36 7 Field Strength of Spurious Radiation 7.1 For LTE-M1 7.1.1 Test Band = LTE-M1 BAND2 7.1.1.1 Test Mode =LTE-M1/TM1 5MHz RB1#0 7.1.1.1.1 Test Channel = LCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 64.100000 125.000000 306.050000 3701.025000 5704.650000 7401.150000 62.550000 110.200000 283.150000 3700.375000 5572.050000 7401.150000
-82.39
-87.32
-87.52
-53.80
-67.09
-58.62
-77.77
-93.24
-87.71
-43.21
-67.36
-63.51
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-69.39
-74.32
-74.52
-40.80
-54.09
-45.62
-64.77
-80.24
-74.71
-30.21
-54.36
-50.51 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal 7.1.1.1.2 Test Channel = MCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 65.000000 124.950000 346.150000 3755.300000 5633.150000 7510.675000 62.700000 110.350000 300.300000 3755.300000 5731.625000 7511.000000
-82.03
-87.36
-86.16
-51.30
-65.93
-57.54
-78.31
-93.64
-87.25
-44.66
-67.04
-61.29
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-69.03
-74.36
-73.16
-38.30
-52.93
-44.54
-65.31
-80.64
-74.25
-31.66
-54.04
-48.29 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 33 of 36 7.1.1.1.3 Test Channel = HCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 65.000000 125.000000 313.100000 3809.900000 5716.025000 7621.175000 62.300000 110.350000 262.450000 3810.550000 5716.350000 7621.500000
-82.48
-87.41
-86.53
-53.51
-61.22
-54.66
-77.91
-93.24
-87.93
-48.28
-65.33
-63.56
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-69.48
-74.41
-73.53
-40.51
-48.22
-41.66
-64.91
-80.24
-74.93
-35.28
-52.33
-50.56 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal NOTE:
1) The disturbance above 13GHz and below 30MHz was very low, and the above harmonics were the highest point could be found when testing, so only the above harmonics had been displayed. 2) We have tested all modulation and all bandwidth, but only the worst case data presented in this report. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 34 of 36 8 Frequency Stability 8.1 Frequency Error VS. Voltage Test Band Test Mode Test Channel Test Temp. LCH TN LTE-M1/TM1 5MHz MCH TN HCH TN LCH TN LTE-M1/TM2 5MHz MCH TN HCH TN LTE-M1 BAND2 Test Volt. VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH Freq. Error
[Hz]
-11.51 3.95
-9.78 9.55
-8.67 1.37 8.75
-3.10
-8.84 6.36 1.99 9.48 2.75 5.15
-1.61 3.91 3.83
-3.20 Freq. vs. rated [ppm] Verdict PASS
-0.006205 PASS 0.002132
-0.005274 PASS PASS 0.005079 PASS
-0.004614 0.000726 PASS PASS 0.004594 PASS
-0.001629 PASS
-0.004639 0.003430 PASS PASS 0.001074 PASS 0.005113 0.001461 PASS PASS 0.002740 PASS
-0.000858 0.002051 PASS PASS 0.002009
-0.001679 PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 35 of 36 8.2 Frequency Error VS. Temperature Test Band Test Mode Test Channel Test Volt. Test Temp. LCH VN LTE-M1 BAND2 LTE-M1/TM1 5MHz MCH VN HCH VN
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50 Freq. Error
[Hz]
9.46
-7.30 6.48 0.59
-0.30
-2.96 4.35 1.51 9.38 6.57 6.10 9.85 8.11 2.17 0.23
-2.38
-6.13
-5.25
-1.95 3.22
-6.30 3.58
-9.25
-7.34
-3.01
-6.16
-6.60 Freq. vs. rated [ppm]
Verdict 0.005102
-0.003936 0.003494 0.000319
-0.000164
-0.001595 0.002345 0.000815 0.005059 0.003496 0.003243 0.005241 0.004314 0.001152 0.000122
-0.001268
-0.003259
-0.002790
-0.001023 0.001689
-0.003308 0.001882
-0.004856
-0.003851
-0.001582
-0.003233
-0.003462 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 36 of 36 Test Band Test Mode Test Channel Test Volt. Test Temp.
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50 LCH VN LTE-M1 BAND2 LTE-M1/TM2 5MHz MCH VN HCH VN The End Freq. Error
[Hz]
-2.46 5.60 2.20 4.22 5.75
-4.56 3.19
-2.42 7.90
-8.13 5.65
-4.77 9.80 5.26
-7.81 9.19 0.28
-5.44 7.07
-4.49 2.15 7.08 5.37 8.84 2.75
-3.31
-4.66 Freq. vs. rated [ppm]
Verdict
-0.001328 0.003018 0.001188 0.002274 0.003101
-0.002459 0.001722
-0.001304 0.004258
-0.004323 0.003003
-0.002536 0.005214 0.002797
-0.004152 0.004886 0.000147
-0.002895 0.003711
-0.002359 0.001129 0.003718 0.002817 0.004643 0.001443
-0.001738
-0.002445 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
| 1 2 3 4 5 | Reference test report part 4 | Test Report | 2.05 MiB | August 02 2019 / August 05 2019 |
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 1 of 35 Appendix B LTE-M1 BAND 4 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 1 2 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 2 of 35 CONTENT Page EFFECTIVE (ISOTROPIC) RADIATED POWER OUTPUT DATA ............................................................3 PEAK-TO-AVERAGE RATIO ........................................................................................................................9 2.1 FOR LTE-M1 ...............................................................................................................................................10 2.1.1 Test Band = LTE-M1 BAND4 ..............................................................................................................10 3 MODULATION CHARACTERISTICS ........................................................................................................16 3.1 FOR LTE-M1 ...............................................................................................................................................16 3.1.1 Test Band = LTE-M1 BAND4 ..............................................................................................................16 4 BANDWIDTH ................................................................................................................................................18 4.1 FOR LTE ......................................................................................................................................................18 4.1.1 Test Band = LTE-M1 BAND4 ..............................................................................................................18 5 BAND EDGES COMPLIANCE ....................................................................................................................25 5.1 FOR LTE-M1 ...............................................................................................................................................25 5.1.1 Test Band = LTE-M1 BAND4 ..............................................................................................................25 6 SPURIOUS EMISSION AT ANTENNA TERMINAL ..................................................................................29 6.1 FOR LTE-M1 ...............................................................................................................................................29 6.1.1 Test Band = LTE-M1 BAND4 ..............................................................................................................29 7 FIELD STRENGTH OF SPURIOUS RADIATION .....................................................................................33 7.1 FOR LTE-M1 ...............................................................................................................................................33 7.1.1 Test Band = LTE-M1 BAND4 ..............................................................................................................33 8 FREQUENCY STABILITY ...........................................................................................................................35 8.1 8.2 FREQUENCY ERROR VS. VOLTAGE ............................................................................................................35 FREQUENCY ERROR VS. TEMPERATURE ...................................................................................................36 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 3 of 35 1 Effective (Isotropic) Radiated Power Output Data Test Band(LTE) Test Test channel Test Mode Bandwidth Effective Isotropic Radiated Power of Transmitter (EIRP) for LTE-M1 BAND 4 EIRP
(dBm) 24.44 24.49 23.59 24.57 24.62 23.62 24.58 24.6 23.49 Test RB Measured
(dBm) 22.84 RB1#0 RB1#5 22.89 21.99 RB6#0 22.97 RB1#0 23.02 RB1#5 RB6#0 22.02 RB1#0 22.98 RB1#5 RB6#0 M1/TM1 21.89 MCH 1.4M HCH LCH LTE-
23 BAND4 Test Band(LTE) Test Mode Test Bandwidth Test channel LCH BAND4 LTE-
M1/TM2 1.4M MCH HCH Test Band(LTE) Test Mode Test Bandwidth Test channel LCH BAND4 LTE-
M1/TM1 3M MCH HCH Test RB Measured
(dBm) RB1#0 22.24 22.31 RB1#5 21.23 RB6#0 22.26 RB1#0 RB1#5 22.11 21.21 RB6#0 22.25 RB1#0 22.31 RB1#5 RB6#0 21.23 Test RB Measured
(dBm) 22.82 RB1#0 22.77 RB1#5 21.88 RB6#0 RB1#0 22.83 22.87 RB1#5 21.85 RB6#0 RB1#0 22.81 22.72 RB1#5 RB6#0 21.83 EIRP
(dBm) 23.84 23.91 22.83 23.86 23.71 22.81 23.85 23.91 22.83 EIRP
(dBm) 24.42 24.37 23.48 24.43 24.47 23.45 24.41 24.32 23.43 limit
(dBm) Verdict PASS 30 30 PASS PASS 30 PASS 30 PASS 30 30 PASS PASS 30 PASS 30 30 PASS limit
(dBm) Verdict 30 PASS PASS 30 PASS 30 PASS 30 30 PASS PASS 30 PASS 30 PASS 30 30 PASS limit
(dBm) Verdict PASS 30 PASS 30 PASS 30 30 PASS PASS 30 PASS 30 30 PASS PASS 30 30 PASS LTE-
Test Test Test BAND4 channel Band(LTE) Test Mode Bandwidth limit
(dBm) Verdict PASS 30 PASS 30 30 PASS PASS 30 30 PASS 30 PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Test RB Measured
(dBm) 21.84 RB1#0 21.92 RB1#5 RB6#0 20.74 21.95 RB1#0 22.01 RB1#5 RB6#0 20.75 EIRP
(dBm) 23.44 23.52 22.34 23.55 23.61 22.35 M1/TM2 MCH LCH 3M SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 4 of 35 HCH RB1#0 RB1#5 RB6#0 21.97 22.11 20.72 Test Band(LTE) Test Mode Test Bandwidth Test channel LCH BAND4 LTE-
M1/TM1 5M MCH HCH Test Band(LTE) Test Mode Test Bandwidth Test channel LCH BAND4 LTE-
M1/TM2 5M MCH HCH Test Band(LTE) Test Mode Test Bandwidth Test channel LCH BAND4 LTE-
M1/TM1 10M MCH HCH Test Band(LTE) Test Mode Test Bandwidth Test channel BAND4 LTE-
M1/TM2 10M LCH MCH Test RB Measured
(dBm) 22.81 RB1#0 22.74 RB1#5 RB6#0 21.92 22.75 RB1#0 22.78 RB1#5 21.88 RB6#0 RB1#0 22.81 22.87 RB1#5 RB6#0 21.93 Test RB Measured
(dBm) 22.22 RB1#0 RB1#5 22.28 20.92 RB6#0 22.26 RB1#0 22.28 RB1#5 RB6#0 20.88 22.15 RB1#0 22.25 RB1#5 RB6#0 20.95 Test RB Measured
(dBm) RB1#0 22.74 22.63 RB1#5 21.87 RB6#0 RB1#0 22.85 22.66 RB1#5 21.81 RB6#0 22.75 RB1#0 RB1#5 22.77 21.82 RB6#0 Test RB Measured
(dBm) 22.14 RB1#0 22.06 RB1#5 20.78 RB6#0 RB1#0 22.22 22.26 RB1#5 RB6#0 20.8 23.57 23.71 22.32 EIRP
(dBm) 24.41 24.34 23.52 24.35 24.38 23.48 24.41 24.47 23.53 EIRP
(dBm) 23.82 23.88 22.52 23.86 23.88 22.48 23.75 23.85 22.55 EIRP
(dBm) 24.34 24.23 23.47 24.45 24.26 23.41 24.35 24.37 23.42 EIRP
(dBm) 23.74 23.66 22.38 23.82 23.86 22.4 30 30 30 PASS PASS PASS limit
(dBm) Verdict PASS 30 PASS 30 30 PASS PASS 30 PASS 30 PASS 30 30 PASS PASS 30 30 PASS limit
(dBm) Verdict PASS 30 30 PASS PASS 30 PASS 30 PASS 30 30 PASS PASS 30 PASS 30 30 PASS limit
(dBm) Verdict 30 PASS PASS 30 PASS 30 30 PASS PASS 30 PASS 30 PASS 30 30 PASS PASS 30 limit
(dBm) Verdict PASS 30 PASS 30 PASS 30 30 PASS PASS 30 30 PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 5 of 35 HCH RB1#0 RB1#5 RB6#0 22.14 22.16 20.91 Test Band(LTE) Test Mode Test Bandwidth Test channel LCH BAND4 LTE-
M1/TM1 15M MCH HCH Test Band(LTE) Test Mode Test Bandwidth Test channel LCH BAND4 LTE-
M1/TM2 15M MCH HCH Test Band(LTE) Test Mode Test Bandwidth Test channel LCH BAND4 LTE-
M1/TM1 20M MCH HCH Test Band(LTE) Test Mode Test Bandwidth Test channel BAND4 LTE-
M1/TM2 20M LCH MCH Test RB Measured
(dBm) 22.72 RB1#0 22.57 RB1#5 RB6#0 22.63 22.76 RB1#0 22.73 RB1#5 22.79 RB6#0 RB1#0 22.67 22.55 RB1#5 RB6#0 22.67 Test RB Measured
(dBm) 22.12 RB1#0 RB1#5 22.11 22.81 RB6#0 22.29 RB1#0 22.27 RB1#5 RB6#0 22.76 22.4 RB1#0 22.38 RB1#5 RB6#0 22.67 Test RB Measured
(dBm) RB1#0 22.78 22.74 RB1#5 22.83 RB6#0 RB1#0 22.89 22.82 RB1#5 22.93 RB6#0 22.94 RB1#0 RB1#5 22.83 22.92 RB6#0 Test RB Measured
(dBm) 22.27 RB1#0 22.14 RB1#5 22.08 RB6#0 RB1#0 22.61 22.67 RB1#5 RB6#0 23.02 23.74 23.76 22.51 EIRP
(dBm) 24.32 24.17 24.23 24.36 24.33 24.39 24.27 24.15 24.27 EIRP
(dBm) 23.72 23.71 24.41 23.89 23.87 24.36 24 23.98 24.27 EIRP
(dBm) 24.38 24.34 24.43 24.49 24.42 24.53 24.54 24.43 24.52 EIRP
(dBm) 23.87 23.74 23.68 24.21 24.27 24.62 30 30 30 PASS PASS PASS limit
(dBm) Verdict PASS 30 PASS 30 30 PASS PASS 30 PASS 30 PASS 30 30 PASS PASS 30 30 PASS limit
(dBm) Verdict PASS 30 30 PASS PASS 30 PASS 30 PASS 30 30 PASS PASS 30 PASS 30 30 PASS limit
(dBm) Verdict 30 PASS PASS 30 PASS 30 30 PASS PASS 30 PASS 30 PASS 30 30 PASS PASS 30 limit
(dBm) Verdict PASS 30 PASS 30 PASS 30 30 PASS PASS 30 30 PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 6 of 35 HCH RB1#0 RB1#5 RB6#0 22.52 22.58 23.02 24.12 24.18 24.62 30 30 30 PASS PASS PASS Note:
a: For getting the EIRP (Efficient Isotropic Radiated Power) in substitution method, the following formula should be taken to calculate it, EIRP [dBm] = SGP [dBm] Cable Loss [dB] + Gain [dBi]
b: SGP=Signal Generator Level This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 7 of 35 Verdict PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS 2 Peak-to-Average Ratio Part I - Test Results Test Band Test Mode Test Channel Measured[dB]
Limit [dB]
Band 4 TM1/5M Full RB TM1/5M 1 RB TM2/5M Full RB TM2/5M 1 RB LCH MCH HCH LCH MCH HCH LCH MCH HCH LCH MCH HCH 4.26 4.29 5.65 4.38 4.32 4.03 5.77 4.26 5.88 5.01 5.04 4.17 Part II - Test Plots 2.1 For LTE-M1 2.1.1 Test Band = LTE-M1 BAND4 2.1.1.1 Test Mode = LTE-M1/TM1.Bandwidth=5MHz Full RB 2.1.1.1.1 Test Channel = LCH 13 13 13 13 13 13 13 13 13 13 13 13 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 8 of 35 2.1.1.1.2 Test Channel = MCH 2.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 9 of 35 2.1.1.2 Test Mode = LTE-M1/TM1.Bandwidth=5MHz 1 RB 2.1.1.2.1 Test Channel = LCH 2.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 10 of 35 2.1.1.2.3 Test Channel = HCH 2.1.1.3 Test Mode = LTE-M1/TM2.Bandwidth=5MHz Full RB 2.1.1.3.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 11 of 35 2.1.1.3.2 Test Channel = MCH 2.1.1.3.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 12 of 35 2.1.1.4 Test Mode = LTE-M1/TM2.Bandwidth=5MHz 1 RB 2.1.1.4.1 Test Channel = LCH 2.1.1.4.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 13 of 35 2.1.1.4.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 14 of 35 3 Modulation Characteristics Part I - Test Plots 3.1 For LTE-M1 3.1.1 Test Band = LTE-M1 BAND4 3.1.1.1 Test Mode = LTE-M1 /TM1 5MHz 3.1.1.1.1 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 15 of 35 3.1.1.2 Test Mode = LTE-M1 /TM2 5MHz 3.1.1.2.1 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 4 Bandwidth Part I - Test Results Test Band Test Mode BAND4 TM1/ 5MHz TM2/ 5MHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 16 of 35 Test Channel LCH MCH HCH LCH MCH HCH Occupied Bandwidth
[MHz]
0.92 1.11 1.10 0.95 1.12 1.12 Emission Bandwidth [MHz]
1.18 1.18 1.16 1.23 1.22 1.23 Verdict PASS PASS PASS PASS PASS PASS 4.1 For LTE 4.1.1 Test Band = LTE-M1 BAND4 4.1.1.1 Test Mode = LTE-M1/TM1 5MHz 4.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 17 of 35 4.1.1.1.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 18 of 35 4.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 19 of 35 4.1.1.2 Test Mode = LTE-M1/TM2 5MHz 4.1.1.2.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 20 of 35 4.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 21 of 35 4.1.1.2.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 22 of 35 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 23 of 35 5 Band Edges Compliance 5.1 For LTE-M1 5.1.1 Test Band = LTE-M1 BAND4 5.1.1.1 Test Mode = LTE-M1/TM1 5MHz 5.1.1.1.1 Test Channel = LCH 5.1.1.1.1.1 Test RB=1RB 5.1.1.1.1.2 Test RB=6RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 24 of 35 5.1.1.1.2 Test Channel = HCH 5.1.1.1.2.1 Test RB=1RB 5.1.1.1.2.2 Test RB=6RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 25 of 35 5.1.1.2 Test Mode = LTE-M1/TM2 5MHz 5.1.1.2.1 Test Channel = LCH 5.1.1.2.1.1 Test RB=1RB 5.1.1.2.1.2 Test RB=6RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 26 of 35 5.1.1.2.2 Test Channel = HCH 5.1.1.2.2.1 Test RB=1RB 5.1.1.2.2.2 Test RB=6RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 27 of 35
[
6 Spurious Emission at Antenna Terminal NOTE1: For the averaged unwanted emissions measurements, the measurement points in each sweep is greater than twice the Span/RBW in order to ensure bin-to-bin spacing of < RBW/2 so that narrowband signals are not lost between frequency bins. As to the present test item, the "Measurement Points = k *
(Span / RBW)" with k between 4 and 5, which results in an acceptable level error of less than 0.5 dB. NOTE2: only the worst case data displayed in this report. Part I - Test Plots 6.1 For LTE-M1 6.1.1 Test Band = LTE-M1 BAND4 6.1.1.1 Test Mode = LTE-M1 / TM1 5MHz RB1#0 6.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 28 of 35 6.1.1.1.2 Test Channel = MCH 6.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 29 of 35 6.1.1.2 Test Mode = LTE-M1 / TM2 5MHz RB1#0 6.1.1.2.1 Test Channel = LCH 6.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 30 of 35 6.1.1.2.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 31 of 35 7 Field Strength of Spurious Radiation 7.1 For LTE-M1 7.1.1 Test Band = LTE-M1 BAND4 7.1.1.1 Test Mode =LTE-M1/TM1 5MHz RB1#0 7.1.1.1.1 Test Channel = LCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 65.050000 124.950000 791.595833 3420.225000 5131.350000 6841.500000 62.650000 110.750000 268.750000 3420.550000 5131.025000 6842.150000
-82.47
-87.58
-80.51
-53.64
-62.79
-53.17
-77.74
-93.38
-87.06
-45.80
-61.05
-59.38
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-69.47
-74.58
-67.51
-40.64
-49.79
-40.17
-64.74
-80.38
-74.06
-32.80
-48.05
-46.38 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal 7.1.1.1.2 Test Channel = MCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 65.450000 125.000000 307.900000 3460.525000 5190.825000 6921.775000 62.450000 111.050000 265.000000 3460.200000 5190.500000 6921.775000
-82.12
-87.29
-87.02
-50.50
-61.64
-54.89
-77.68
-93.43
-87.14
-45.08
-64.21
-56.73
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-69.12
-74.29
-74.02
-37.50
-48.64
-41.89
-64.68
-80.43
-74.14
-32.08
-51.21
-43.73 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 32 of 35 7.1.1.1.3 Test Channel = HCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 65.150000 125.000000 1103.000000 3501.150000 5250.950000 7001.400000 62.100000 300.300000 1046.000000 3501.150000 5250.300000 7002.050000
-82.19
-87.64
-61.93
-52.13
-65.26
-54.74
-78.43
-87.33
-61.12
-55.85
-65.82
-61.34
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-69.19
-74.64
-48.93
-39.13
-52.26
-41.74
-65.43
-74.33
-48.12
-42.85
-52.82
-48.34 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal NOTE:
1) The disturbance above 13GHz and below 30MHz was very low, and the above harmonics were the highest point could be found when testing, so only the above harmonics had been displayed. 2) We have tested all modulation and all bandwidth, but only the worst case data presented in this report. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 33 of 35 8 Frequency Stability 8.1 Frequency Error VS. Voltage Test Band Test Mode Test Channel Test Temp. LCH TN LTE-M1/TM1 5MHz MCH TN HCH TN LCH TN LTE-M1/TM2 5MHz MCH TN HCH TN LTE-M1 BAND4 Test Volt. VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH Freq. Error
[Hz]
-5.13
-8.66
-9.96 6.69
-6.87 5.30 9.17
-0.30
-0.76 4.49
-2.37 8.11
-6.02 3.88 7.45 8.26 3.05 2.02 Freq. vs. rated [ppm] Verdict PASS
-0.002991 PASS
-0.005047
-0.005809 PASS PASS 0.003859 PASS
-0.003967 0.003058 PASS PASS 0.005238 PASS
-0.000174 PASS
-0.000434 0.002616 PASS PASS
-0.001382 PASS 0.004727
-0.003476 PASS PASS 0.002239 PASS 0.004301 0.004720 PASS PASS 0.001744 0.001154 PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 34 of 35 8.2 Frequency Error VS. Temperature Test Band Test Mode Test Channel Test Volt. Test Temp.
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50 LCH VN LTE-M1 BAND4 LTE-M1/TM1 5MHz MCH VN HCH VN Freq. Error
[Hz]
-3.59 2.09 2.54
-9.41
-8.64
-9.60
-8.42 7.08
-9.72 8.01
-8.20 2.04 6.94 2.40
-7.48
-2.12 8.58 3.21 3.43 8.51 9.61
-1.67 6.52 2.55 9.93 0.29 6.28 Freq. vs. rated [ppm]
Verdict
-0.002094 0.001218 0.001484
-0.005488
-0.005038
-0.005599
-0.004909 0.004128
-0.005669 0.004623
-0.004734 0.001179 0.004006 0.001386
-0.004320
-0.001222 0.004952 0.001853 0.001961 0.004864 0.005493
-0.000954 0.003728 0.001458 0.005672 0.000166 0.003590 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 35 of 35 Test Band Test Mode Test Channel Test Volt. Test Temp.
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50 LCH VN LTE-M1 BAND4 LTE-M1/TM2 5MHz MCH VN HCH VN The End Freq. Error
[Hz]
2.73 4.57 9.05
-5.05
-1.95 1.14
-3.56
-6.61
-9.44 3.67 0.90 8.16
-6.83 2.53
-0.48 7.86 9.37
-6.72
-2.33 6.10 9.47
-8.26
-7.86 2.69 0.87 1.62
-5.29 Freq. vs. rated [ppm]
Verdict 0.001591 0.002663 0.005277
-0.002943
-0.001137 0.000665
-0.002079
-0.003854
-0.005503 0.002120 0.000522 0.004711
-0.003944 0.001461
-0.000277 0.004539 0.005407
-0.003879
-0.001333 0.003484 0.005413
-0.004718
-0.004493 0.001536 0.000495 0.000924
-0.003022 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
| 1 2 3 4 5 | Reference test report part 5 | Test Report | 2.12 MiB | August 02 2019 / August 05 2019 |
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 1 of 36 Appendix B LTE-M1 BAND12 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 1 2 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 2 of 36 CONTENT Page EFFECTIVE (ISOTROPIC) RADIATED POWER OUTPUT DATA ............................................................3 PEAK-TO-AVERAGE RATIO ........................................................................................................................6 2.1 FOR LTE-M1 .................................................................................................................................................6 2.1.1 Test Band = LTE-M1 band12 ................................................................................................................6 3 MODULATION CHARACTERISTICS ........................................................................................................13 3.1 FOR LTE-M1 ...............................................................................................................................................13 3.1.1 Test Band = LTE-M1 band12 ..............................................................................................................13 4 BANDWIDTH ................................................................................................................................................15 4.1 FOR LTE ......................................................................................................................................................15 4.1.1 Test Band = LTE-M1 band12 ..............................................................................................................15 5 BAND EDGES COMPLIANCE ....................................................................................................................22 5.1 FOR LTE-M1 ...............................................................................................................................................22 5.1.1 Test Band = LTE-M1 band12 ..............................................................................................................22 6 SPURIOUS EMISSION AT ANTENNA TERMINAL ..................................................................................27 6.1 FOR LTE-M1 ...............................................................................................................................................27 6.1.1 Test Band = LTE-M1 band12 ..............................................................................................................27 7 FIELD STRENGTH OF SPURIOUS RADIATION .....................................................................................31 7.1 FOR LTE-M1 ...............................................................................................................................................31 7.1.1 Test Band = LTE-M1 band12 ..............................................................................................................31 8 FREQUENCY STABILITY ...........................................................................................................................33 8.1 8.2 FREQUENCY ERROR VS. VOLTAGE ............................................................................................................33 FREQUENCY ERROR VS. TEMPERATURE ...................................................................................................34 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 3 of 36 1 Effective (Isotropic) Radiated Power Output Data Effective Isotropic Radiated Power of Transmitter (EIRP) for LTE-M1 BAND12 Test Band(LTE) Test Mode Test Bandwidth Test channel LCH BAND12 LTE-
M1/TM1 1.4M MCH HCH Test Band(LTE) Test Mode Test Bandwidth Test channel LCH BAND12 LTE-
M1/TM2 1.4M MCH HCH Test Band(LTE) Test Mode Test Bandwidth Test channel LCH BAND12 LTE-
M1/TM1 3M MCH HCH Test Band(LTE) Test Mode Test Bandwidth Test channel BAND12 LTE-
M1/TM2 3M LCH MCH Test RB Measured
(dBm) 23.37 RB1#0 RB1#5 23.43 22.21 RB6#0 23.19 RB1#0 23.21 RB1#5 RB6#0 22.22 23.13 RB1#0 23.16 RB1#5 RB6#0 22.05 Test RB Measured
(dBm) RB1#0 22.52 22.53 RB1#5 21.28 RB6#0 22.55 RB1#0 RB1#5 22.61 21.26 RB6#0 22.25 RB1#0 22.53 RB1#5 RB6#0 21.08 Test RB Measured
(dBm) 23.43 RB1#0 23.49 RB1#5 22.33 RB6#0 RB1#0 23.06 23.12 RB1#5 22.13 RB6#0 23.01 RB1#0 RB1#5 23.07 22.31 RB6#0 Test RB Measured
(dBm) 22.83 RB1#0 22.73 RB1#5 RB6#0 21.06 22.28 RB1#0 22.26 RB1#5 RB6#0 21.08 ERP
(dBm) 20.62 20.68 19.46 20.44 20.46 19.47 20.38 20.41 19.3 ERP
(dBm) 19.77 19.78 18.53 19.8 19.86 18.51 19.5 19.78 18.33 ERP
(dBm) 20.68 20.74 19.58 20.31 20.37 19.38 20.26 20.32 19.56 ERP
(dBm) 20.08 19.98 18.31 19.53 19.51 18.33 limit
(dBm) Verdict PASS 34.77 34.77 PASS PASS 34.77 PASS 34.77 PASS 34.77 34.77 PASS PASS 34.77 PASS 34.77 34.77 PASS limit
(dBm) Verdict 34.77 PASS PASS 34.77 PASS 34.77 PASS 34.77 34.77 PASS PASS 34.77 PASS 34.77 PASS 34.77 34.77 PASS limit
(dBm) Verdict PASS 34.77 PASS 34.77 PASS 34.77 34.77 PASS PASS 34.77 PASS 34.77 PASS 34.77 34.77 PASS PASS 34.77 limit
(dBm) Verdict PASS 34.77 PASS 34.77 34.77 PASS PASS 34.77 PASS 34.77 34.77 PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 4 of 36 HCH RB1#0 RB1#5 RB6#0 22.31 22.38 21.06 19.56 19.63 18.31 34.77 34.77 34.77 PASS PASS PASS Test Band(LTE) Test Mode Test Bandwidth Test channel LCH BAND12 LTE-
M1/TM1 5M MCH HCH Test Band(LTE) Test Mode Test Bandwidth Test channel LCH BAND12 LTE-
M1/TM2 5M MCH HCH Test Band(LTE) Test Mode Test Bandwidth Test channel LCH BAND12 LTE-
M1/TM1 10M MCH HCH Test Band(LTE) Test Mode Test Bandwidth Test channel BAND12 LTE-
M1/TM2 10M LCH MCH HCH Test RB Measured
(dBm) 23.38 RB1#0 23.42 RB1#5 RB6#0 22.41 23.42 RB1#0 23.48 RB1#5 22.14 RB6#0 RB1#0 23.25 23.27 RB1#5 RB6#0 22.02 Test RB Measured
(dBm) 22.98 RB1#0 RB1#5 22.86 21.35 RB6#0 22.42 RB1#0 22.87 RB1#5 RB6#0 21.35 22.61 RB1#0 22.7 RB1#5 RB6#0 21.25 Test RB Measured
(dBm) 23.19 RB1#0 RB1#5 23.23 22.16 RB6#0 23.22 RB1#0 RB1#5 23.2 22.1 RB6#0 23.13 RB1#0 23.07 RB1#5 RB6#0 21.98 Test RB Measured
(dBm) RB1#0 22.91 22.97 RB1#5 21.17 RB6#0 RB1#0 22.87 22.77 RB1#5 22.1 RB6#0 RB1#0 22.86 ERP
(dBm) 20.63 20.67 19.66 20.67 20.73 19.39 20.5 20.52 19.27 ERP
(dBm) 20.23 20.11 18.6 19.67 20.12 18.6 19.86 19.95 18.5 ERP
(dBm) 20.44 20.48 19.41 20.47 20.45 19.35 20.38 20.32 19.23 ERP
(dBm) 20.16 20.22 18.42 20.12 20.02 19.35 20.11 limit
(dBm) Verdict PASS 34.77 PASS 34.77 34.77 PASS PASS 34.77 PASS 34.77 PASS 34.77 34.77 PASS PASS 34.77 34.77 PASS limit
(dBm) Verdict PASS 34.77 34.77 PASS PASS 34.77 PASS 34.77 PASS 34.77 34.77 PASS PASS 34.77 PASS 34.77 34.77 PASS limit
(dBm) Verdict PASS 34.77 34.77 PASS PASS 34.77 PASS 34.77 34.77 PASS PASS 34.77 PASS 34.77 PASS 34.77 34.77 PASS limit
(dBm) Verdict 34.77 PASS PASS 34.77 PASS 34.77 34.77 PASS PASS 34.77 PASS 34.77 34.77 PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 5 of 36 Note:
a: For getting the ERP (Efficient Radiated Power) in substitution method, the following formula should be taken to calculate it, RB1#5 RB6#0 22.76 21.12 20.01 18.37 34.77 34.77 PASS PASS ERP [dBm] = SGP [dBm] Cable Loss [dB] + Gain [dBd]
b: SGP=Signal Generator Level This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 6 of 36 2 Peak-to-Average Ratio Part I - Test Results Test Band Test Mode Test Channel Measured[dB]
Limit [dB]
BAND12 TM1/5M Full RB TM1/5M 1 RB TM2/5M Full RB TM2/5M 1 RB LCH MCH HCH LCH MCH HCH LCH MCH HCH LCH MCH HCH 5.30 5.68 5.36 4.17 5.01 6.17 5.54 6.55 5.45 5.45 5.48 5.45 13 13 13 13 13 13 13 13 13 13 13 13 Verdict PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS Part II - Test Plots 2.1 For LTE-M1 2.1.1 Test Band = LTE-M1 band12 2.1.1.1 Test Mode = LTE-M1/TM1.Bandwidth=5MHz Full RB 2.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 7 of 36 2.1.1.1.2 Test Channel = MCH 2.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 8 of 36 2.1.1.2 Test Mode = LTE-M1/TM1.Bandwidth=5MHz 1 RB 2.1.1.2.1 Test Channel = LCH 2.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 9 of 36 2.1.1.2.3 Test Channel = HCH 2.1.1.3 Test Mode = LTE-M1/TM2.Bandwidth=5MHz Full RB 2.1.1.3.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 10 of 36 2.1.1.3.2 Test Channel = MCH 2.1.1.3.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 11 of 36 2.1.1.4 Test Mode = LTE-M1/TM2.Bandwidth=5MHz 1 RB 2.1.1.4.1 Test Channel = LCH 2.1.1.4.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 12 of 36 2.1.1.4.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 13 of 36 3 Modulation Characteristics Part I - Test Plots 3.1 For LTE-M1 3.1.1 Test Band = LTE-M1 band12 3.1.1.1 Test Mode = LTE-M1 /TM1 5MHz 3.1.1.1.1 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 14 of 36 3.1.1.2 Test Mode = LTE-M1 /TM2 5MHz 3.1.1.2.1 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 4 Bandwidth Part I - Test Results Test Band Test Mode Band12 TM1/ 5MHz TM2/ 5MHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 15 of 36 Test Channel LCH MCH HCH LCH MCH HCH Occupied Bandwidth
[MHz]
1.10 1.11 1.11 1.11 1.11 1.11 Emission Bandwidth [MHz]
1.38 1.39 1.40 1.48 1.47 1.48 Verdict PASS PASS PASS PASS PASS PASS 4.1 For LTE 4.1.1 Test Band = LTE-M1 band12 4.1.1.1 Test Mode = LTE-M1/TM1 5MHz 4.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 16 of 36 4.1.1.1.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 17 of 36 4.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 18 of 36 4.1.1.2 Test Mode = LTE-M1/TM2 5MHz 4.1.1.2.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 19 of 36 4.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 20 of 36 4.1.1.2.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 21 of 36 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 22 of 36 5 Band Edges Compliance 5.1 For LTE-M1 5.1.1 Test Band = LTE-M1 band12 5.1.1.1 Test Mode = LTE-M1/TM1 5MHz 5.1.1.1.1 Test Channel = LCH 5.1.1.1.1.1 Test RB=1RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 23 of 36 5.1.1.1.1.2 Test RB=6RB 5.1.1.1.2 Test Channel = HCH 5.1.1.1.2.1 Test RB=1RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 24 of 36 5.1.1.1.2.2 Test RB=6RB 5.1.1.2 Test Mode = LTE-M1/TM2 5MHz 5.1.1.2.1 Test Channel = LCH 5.1.1.2.1.1 Test RB=1RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 25 of 36 5.1.1.2.1.2 Test RB=6RB 5.1.1.2.2 Test Channel = HCH 5.1.1.2.2.1 Test RB=1RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 26 of 36 5.1.1.2.2.2 Test RB=6RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 27 of 36
[
6 Spurious Emission at Antenna Terminal NOTE1: For the averaged unwanted emissions measurements, the measurement points in each sweep is greater than twice the Span/RBW in order to ensure bin-to-bin spacing of < RBW/2 so that narrowband signals are not lost between frequency bins. As to the present test item, the "Measurement Points = k *
(Span / RBW)" with k between 4 and 5, which results in an acceptable level error of less than 0.5 dB. NOTE2: only the worst case data displayed in this report. Part I - Test Plots 6.1 For LTE-M1 6.1.1 Test Band = LTE-M1 band12 6.1.1.1 Test Mode = LTE-M1 / TM1 5MHz RB1#0 6.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 28 of 36 6.1.1.1.2 Test Channel = MCH 6.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 29 of 36 6.1.1.2 Test Mode = LTE-M1 / TM2 5MHz RB1#0 6.1.1.2.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 30 of 36 6.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 31 of 36 6.1.1.2.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 32 of 36 7 Field Strength of Spurious Radiation 7.1 For LTE-M1 7.1.1 Test Band = LTE-M1 band12 7.1.1.1 Test Mode =LTE-M1/TM1 5MHz RB1#0 7.1.1.1.1 Test Channel = LCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 63.693333 125.013333 933.083333 1398.000000 2098.500000 5594.475000 63.226667 932.120833 1398.500000 2098.000000 6041.512500 7855.987500
-82.31
-86.79
-63.85
-47.88
-60.70
-63.39
-78.41
-61.51
-40.99
-52.72
-65.70
-64.38
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-69.31
-73.79
-50.85
-34.88
-47.70
-50.39
-65.41
-48.51
-27.99
-39.72
-52.70
-51.38 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal 7.1.1.1.2 Test Channel = MCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 64.393333 124.966667 941.104167 1410.500000 2116.000000 7053.075000 63.553333 300.293333 940.187500 1410.500000 2116.500000 5643.225000
-82.16
-87.31
-65.49
-44.48
-60.12
-62.61
-78.32
-86.70
-61.47
-39.66
-54.71
-65.20
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-69.16
-74.31
-52.49
-31.48
-47.12
-49.61
-65.32
-73.70
-48.47
-26.66
-41.71
-52.20 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 33 of 36 7.1.1.1.3 Test Channel = HCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 65.606667 124.966667 929.875000 1422.500000 2200.000000 5690.025000 62.666667 949.033333 1422.500000 2134.000000 3556.237500 5690.512500
-82.63
-87.26
-66.28
-43.92
-59.40
-64.24
-77.61
-58.23
-40.30
-57.57
-68.73
-65.21
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-69.63
-74.26
-53.28
-30.92
-46.40
-51.24
-64.61
-45.23
-27.30
-44.57
-55.73
-52.21 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal NOTE:
1) The disturbance above 13GHz and below 30MHz was very low, and the above harmonics were the highest point could be found when testing, so only the above harmonics had been displayed. 2) We have tested all modulation and all bandwidth, but only the worst case data presented in this report. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 34 of 36 8 Frequency Stability 8.1 Frequency Error VS. Voltage Test Band Test Mode Test Channel Test Temp. LCH TN LTE-M1/TM1 5MHz MCH TN HCH TN LCH TN LTE-M1/TM2 5MHz MCH TN HCH TN LTE-M1 Band12 Test Volt. VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH Freq. Error
[Hz]
-4.15 1.52
-5.14
-6.03 7.24 6.15
-4.36
-9.67 9.77 7.34
-1.45 5.16 1.82
-2.80
-2.78
-8.06 5.87
-2.85 Freq. vs. rated [ppm] Verdict PASS
-0.005913 PASS 0.002170 PASS
-0.007324 PASS
-0.008529 PASS 0.010235 PASS 0.008704 PASS
-0.006118 PASS
-0.013566 PASS 0.013712 PASS 0.010461 PASS
-0.002068 PASS 0.007363 PASS 0.002579 PASS
-0.003957 PASS
-0.003937 PASS
-0.011306 PASS 0.008244 PASS
-0.003997 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 35 of 36 8.2 Frequency Error VS. Temperature Test Band Test Mode Test Channel Test Volt. Test Temp.
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50 LCH VN LTE-M1 Band12 LTE-M1/TM1 5MHz MCH VN HCH VN Freq. Error
[Hz]
-4.52
-2.76
-0.37
-7.02
-6.08
-7.27 8.62 9.54 0.20
-6.83
-1.46
-3.43
-9.98 6.36 0.30
-2.49
-5.07
-3.84
-5.02 1.21
-9.79
-1.71 3.15
-7.68
-6.04 7.24
-4.75 Freq. vs. rated [ppm]
Verdict
-0.006449
-0.003938
-0.000526
-0.010012
-0.008667
-0.010359 0.012287 0.013595 0.000280
-0.009658
-0.002062
-0.004852
-0.014114 0.008991 0.000425
-0.003521
-0.007170
-0.005438
-0.007042 0.001702
-0.013741
-0.002404 0.004424
-0.010773
-0.008479 0.010164
-0.006668 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 36 of 36 Test Band Test Mode Test Channel Test Volt. Test Temp.
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50 LCH VN LTE-M1 band2 LTE-M1/TM2 5MHz MCH VN HCH VN The End Freq. Error
[Hz]
-9.21 1.68 9.17 6.38 0.80
-3.01 6.80
-4.02
-7.80
-3.55 7.35
-7.63 3.60 0.74 7.72 1.82 5.66 1.69
-6.25 8.41 7.17
-4.38 4.05 2.72
-2.47
-8.58
-3.82 Freq. vs. rated [ppm]
Verdict
-0.013127 0.002391 0.013078 0.009088 0.001146
-0.004294 0.009694
-0.005731
-0.011119
-0.005027 0.010396
-0.010790 0.005087 0.001049 0.010913 0.002576 0.008001 0.002391
-0.008776 0.011803 0.010068
-0.006153 0.005689 0.003824
-0.003465
-0.012036
-0.005358 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
| 1 2 3 4 5 | Reference test report part 6 | Test Report | 2.09 MiB | August 02 2019 / August 05 2019 |
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 1 of 33 Appendix B LTE-M1 BAND 13 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 1 2 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 2 of 33 CONTENT Page EFFECTIVE (ISOTROPIC) RADIATED POWER OUTPUT DATA ............................................................3 PEAK-TO-AVERAGE RATIO ........................................................................................................................4 2.1 FOR LTE-M1 .................................................................................................................................................4 2.1.1 Test Band = LTE-M1 BAND13 ..............................................................................................................4 3 MODULATION CHARACTERISTICS ........................................................................................................11 3.1 FOR LTE-M1 ...............................................................................................................................................11 3.1.1 Test Band = LTE-M1 BAND13 ............................................................................................................11 4 BANDWIDTH ................................................................................................................................................13 4.1 FOR LTE ......................................................................................................................................................13 4.1.1 Test Band = LTE-M1 BAND13 ............................................................................................................13 5 BAND EDGES COMPLIANCE ....................................................................................................................20 5.1 FOR LTE-M1 ...............................................................................................................................................20 5.1.1 Test Band = LTE-M1 BAND13 ............................................................................................................20 6 SPURIOUS EMISSION AT ANTENNA TERMINAL ..................................................................................25 6.1 FOR LTE-M1 ...............................................................................................................................................25 6.1.1 Test Band = LTE-M1 BAND13 ............................................................................................................25 7 FIELD STRENGTH OF SPURIOUS RADIATION .....................................................................................32 7.1 FOR LTE-M1 ...............................................................................................................................................32 7.1.1 Test Band = LTE-M1 BAND13 ............................................................................................................32 8 FREQUENCY STABILITY ...........................................................................................................................34 8.1 8.2 FREQUENCY ERROR VS. VOLTAGE ............................................................................................................34 FREQUENCY ERROR VS. TEMPERATURE ...................................................................................................35 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 3 of 33 1 Effective (Isotropic) Radiated Power Output Data Effective Isotropic Radiated Power of Transmitter (EIRP) for LTE-M1 BAND13 Test Band(LTE) Test Mode Test Bandwidth Test channel LCH BAND13 LTE-
M1/TM1 5M MCH HCH Test Band(LTE) Test Mode Test Bandwidth Test channel LCH BAND13 LTE-
M1/TM2 5M MCH HCH Test Band(LTE) Test Mode Test Bandwidth Test channel BAND13 LTE-
M1/TM1 10M MCH Test Band(LTE) Test Mode Test Bandwidth Test channel BAND13 LTE-
M1/TM2 10M MCH Test RB Measured
(dBm) 23.06 RB1#0 RB1#5 22.98 22.09 RB6#0 23.03 RB1#0 23.07 RB1#5 RB6#0 22.18 22.93 RB1#0 22.96 RB1#5 RB6#0 21.99 Test RB Measured
(dBm) RB1#0 22.63 22.65 RB1#5 21.1 RB6#0 22.65 RB1#0 RB1#5 22.67 21.11 RB6#0 22.46 RB1#0 22.49 RB1#5 RB6#0 21.14 Test RB Measured
(dBm) 23.06 RB1#0 23.25 RB1#5 RB6#0 22.12 ERP
(dBm) 20.11 20.03 19.14 20.08 20.12 19.23 19.98 20.01 19.04 ERP
(dBm) 19.68 19.7 18.15 19.7 19.72 18.16 19.51 19.54 18.19 ERP
(dBm) 20.11 20.3 19.17 limit
(dBm) Verdict PASS 34.77 34.77 PASS PASS 34.77 PASS 34.77 PASS 34.77 34.77 PASS PASS 34.77 PASS 34.77 34.77 PASS limit
(dBm) Verdict 34.77 PASS PASS 34.77 PASS 34.77 PASS 34.77 34.77 PASS PASS 34.77 PASS 34.77 PASS 34.77 34.77 PASS limit
(dBm) Verdict PASS 34.77 PASS 34.77 34.77 PASS Test RB Measured
(dBm) 22.71 RB1#0 RB1#5 22.63 21.15 RB6#0 ERP
(dBm) 19.76 19.68 18.2 limit
(dBm) Verdict PASS 34.77 34.77 PASS PASS 34.77 Note:
a: For getting the ERP (Efficient Radiated Power) in substitution method, the following formula should be taken to calculate it, ERP [dBm] = SGP [dBm] Cable Loss [dB] + Gain [dBd]
b: SGP=Signal Generator Level This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 4 of 33 2 Peak-to-Average Ratio Part I - Test Results Test Band Test Mode Test Channel Measured[dB]
Limit [dB]
BAND13 TM1/5M Full RB TM1/5M 1 RB TM2/5M Full RB TM2/5M 1 RB LCH MCH HCH LCH MCH HCH LCH MCH HCH LCH MCH HCH 4.38 5.30 4.43 4.09 4.03 3.97 5.25 5.25 5.57 4.49 4.87 4.78 13 13 13 13 13 13 13 13 13 13 13 13 Verdict PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS Part II - Test Plots 2.1 For LTE-M1 2.1.1 Test Band = LTE-M1 BAND13 2.1.1.1 Test Mode = LTE-M1/TM1.Bandwidth=5MHz Full RB 2.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 5 of 33 2.1.1.1.2 Test Channel = MCH 2.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 6 of 33 2.1.1.2 Test Mode = LTE-M1/TM1.Bandwidth=5MHz 1 RB 2.1.1.2.1 Test Channel = LCH 2.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 7 of 33 2.1.1.2.3 Test Channel = HCH 2.1.1.3 Test Mode = LTE-M1/TM2.Bandwidth=5MHz Full RB 2.1.1.3.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 8 of 33 2.1.1.3.2 Test Channel = MCH 2.1.1.3.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 9 of 33 2.1.1.4 Test Mode = LTE-M1/TM2.Bandwidth=5MHz 1 RB 2.1.1.4.1 Test Channel = LCH 2.1.1.4.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 10 of 33 2.1.1.4.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 11 of 33 3 Modulation Characteristics Part I - Test Plots 3.1 For LTE-M1 3.1.1 Test Band = LTE-M1 BAND13 3.1.1.1 Test Mode = LTE-M1 /TM1 5MHz 3.1.1.1.1 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 12 of 33 3.1.1.2 Test Mode = LTE-M1 /TM2 5MHz 3.1.1.2.1 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 4 Bandwidth Part I - Test Results Test Band Test Mode BAND13 TM1/ 5MHz TM2/ 5MHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 13 of 33 Test Channel LCH MCH HCH LCH MCH HCH Occupied Bandwidth
[MHz]
1.10 1.10 1.10 1.11 1.11 1.11 Emission Bandwidth [MHz]
1.39 1.41 1.42 1.49 1.49 1.48 Verdict PASS PASS PASS PASS PASS PASS 4.1 For LTE 4.1.1 Test Band = LTE-M1 BAND13 4.1.1.1 Test Mode = LTE-M1/TM1 5MHz 4.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 14 of 33 4.1.1.1.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 15 of 33 4.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 16 of 33 4.1.1.2 Test Mode = LTE-M1/TM2 5MHz 4.1.1.2.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 17 of 33 4.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 18 of 33 4.1.1.2.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 19 of 33 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 20 of 33 5 Band Edges Compliance 5.1 For LTE-M1 5.1.1 Test Band = LTE-M1 BAND13 5.1.1.1 Test Mode = LTE-M1/TM1 5MHz 5.1.1.1.1 Test Channel = LCH 5.1.1.1.1.1 Test RB=1RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 21 of 33 5.1.1.1.1.2 Test RB=6RB 5.1.1.1.2 Test Channel = HCH 5.1.1.1.2.1 Test RB=1RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 22 of 33 5.1.1.1.2.2 Test RB=6RB 5.1.1.1.3 Test Channel = LCH 5.1.1.1.3.1 Test RB=1RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 23 of 33 5.1.1.1.3.2 Test RB=6RB 5.1.1.1.4 Test Channel = HCH 5.1.1.1.4.1 Test RB=1RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 24 of 33 5.1.1.1.4.2 Test RB=6RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 25 of 33
[
6 Spurious Emission at Antenna Terminal NOTE1: For the averaged unwanted emissions measurements, the measurement points in each sweep is greater than twice the Span/RBW in order to ensure bin-to-bin spacing of < RBW/2 so that narrowband signals are not lost between frequency bins. As to the present test item, the "Measurement Points = k *
(Span / RBW)" with k between 4 and 5, which results in an acceptable level error of less than 0.5 dB. NOTE2: only the worst case data displayed in this report. Part I - Test Plots 6.1 For LTE-M1 6.1.1 Test Band = LTE-M1 BAND13 6.1.1.1 Test Mode = LTE-M1 / TM1 5MHz RB1#0 6.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 26 of 33 6.1.1.1.2 Test Channel = MCH 6.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 27 of 33 6.1.1.2 Test Mode = LTE-M1 / TM2 5MHz RB1#0 6.1.1.2.1 Test Channel = LCH 6.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 28 of 33 6.1.1.2.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 29 of 33 7 Field Strength of Spurious Radiation 7.1 For LTE-M1 7.1.1 Test Band = LTE-M1 BAND13 7.1.1.1 Test Mode =LTE-M1/TM1 5MHz RB1#0 7.1.1.1.1 Test Channel = LCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 63.693333 90.480000 1554.500000 2332.000000 3109.200000 6486.112500 63.553333 104.293333 1554.500000 2332.500000 3109.200000 7451.362500
-82.27
-84.74
-53.20
-59.12
-67.75
-65.23
-78.21
-84.38
-52.64
-58.92
-65.06
-66.14
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-69.27
-71.74
-40.20
-46.12
-54.75
-52.23
-65.21
-71.38
-39.64
-45.92
-52.06
-53.14 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal 7.1.1.1.2 Test Channel = MCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 63.693333 104.246667 1559.500000 2339.000000 4298.212500 7919.850000 57.113333 104.293333 1560.000000 2339.500000 3118.950000 7034.550000
-81.51
-83.92
-54.36
-58.22
-67.09
-63.99
-77.57
-84.75
-50.80
-53.22
-65.09
-65.23
-13.00
-13.00
-40.00
-13.00
-13.00
-13.00
-13.00
-13.00
-40.00
-13.00
-13.00
-13.00
-68.51
-70.92
-14.36
-45.22
-54.09
-50.99
-64.57
-71.75
-10.80
-40.22
-52.09
-52.23 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 30 of 33 7.1.1.1.3 Test Channel = HCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 63.880000 104.246667 1565.000000 2347.000000 3129.187500 6486.600000 62.433333 104.293333 1564.500000 2346.500000 3129.675000 7051.612500
-82.02
-85.19
-54.61
-59.20
-67.68
-65.26
-77.72
-85.03
-50.78
-57.13
-67.45
-65.22
-13.00
-13.00
-40.00
-13.00
-13.00
-13.00
-13.00
-13.00
-40.00
-13.00
-13.00
-13.00
-69.02
-72.19
-14.61
-46.20
-54.68
-52.26
-64.72
-72.03
-10.78
-44.13
-54.45
-52.22 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal NOTE:
1) The disturbance above 13GHz and below 30MHz was very low, and the above harmonics were the highest point could be found when testing, so only the above harmonics had been displayed. 2) We have tested all modulation and all bandwidth, but only the worst case data presented in this report. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 31 of 33 8 Frequency Stability 8.1 Frequency Error VS. Voltage Test Band Test Mode Test Channel Test Temp. LCH TN LTE-M1/TM1 5MHz MCH TN HCH TN LCH TN LTE-M1/TM2 5MHz MCH TN HCH TN LTE-M1 BAND13 Test Volt. VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH Freq. Error
[Hz]
-13.81 8.77 3.89
-0.63
-8.99
-9.38 0.38
-0.35
-3.82 4.56 1.54
-6.47 6.67
-7.23 7.01 5.69
-2.49 1.70 Freq. vs. rated [ppm] Verdict PASS
-0.017711 PASS 0.011255 PASS 0.004992 PASS
-0.000803 PASS
-0.011493 PASS
-0.011997 PASS 0.000490 PASS
-0.000443 PASS
-0.004872 PASS 0.005845 PASS 0.001978 PASS
-0.008306 PASS 0.008530 PASS
-0.009247 PASS 0.008963 PASS 0.007256 PASS
-0.003168 PASS 0.002170 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 32 of 33 8.2 Frequency Error VS. Temperature Test Band Test Mode Test Channel Test Volt. Test Temp.
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50 LCH VN LTE-M1 BAND13 LTE-M1/TM1 5MHz MCH VN HCH VN Freq. Error
[Hz]
-3.32 1.48
-3.11
-6.58 1.12
-7.66
-3.43
-6.51 0.56
-0.04 2.49
-0.86 9.97
-3.33
-0.68 2.61 4.46 9.00
-2.52
-2.30
-2.88
-5.00 2.69 9.29 3.10 2.45
-5.04 Freq. vs. rated [ppm]
Verdict
-0.004261 0.001905
-0.003986
-0.008447 0.001434
-0.009822
-0.004396
-0.008354 0.000721
-0.000049 0.003178
-0.001101 0.012744
-0.004253
-0.000872 0.003332 0.005705 0.011511
-0.003212
-0.002937
-0.003673
-0.006375 0.003433 0.011840 0.003949 0.003117
-0.006422 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 33 of 33 Test Band Test Mode Test Channel Test Volt. Test Temp.
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50 LCH VN LTE-M1 BAND13 LTE-M1/TM2 5MHz MCH VN HCH VN The End Freq. Error
[Hz]
-0.98 4.57
-2.68
-8.96 1.43 6.54
-2.27 0.56 4.88 7.50
-9.97
-8.08 8.28 4.56
-0.39
-3.50
-3.84 3.56
-8.87
-6.30 0.22
-0.99 0.77 4.44 1.39 6.38
-0.12 Freq. vs. rated [ppm]
Verdict
-0.001261 0.005858
-0.003437
-0.011501 0.001834 0.008386
-0.002914 0.000717 0.006263 0.009592
-0.012754
-0.010339 0.010584 0.005835
-0.000503
-0.004470
-0.004917 0.004552
-0.011306
-0.008025 0.000279
-0.001259 0.000983 0.005659 0.001770 0.008131
-0.000148 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
| 1 2 3 4 5 | Reference test report part 7 | Test Report | 5.43 MiB | August 02 2019 / August 05 2019 |
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 1 of 34 Appendix B LTE-M1 BAND26(814MHz-824MHz) This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 1 2 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 2 of 34 CONTENT Page EFFECTIVE (ISOTROPIC) RADIATED POWER OUTPUT DATA ............................................................ 3 PEAK-TO-AVERAGE RATIO ....................................................................................................................... 5 2.1 FOR LTE-M1 ................................................................................................................................................ 5 2.1.1 Test Band = LTE-M1 BAND26(814MHz-824MHz) ............................................................................ 5 3 MODULATION CHARACTERISTICS ........................................................................................................ 12 3.1 FOR LTE-M1 .............................................................................................................................................. 12 3.1.1 Test Band = LTE-M1 BAND26(814MHz-824MHz) .......................................................................... 12 4 BANDWIDTH ............................................................................................................................................... 14 4.1 FOR LTE ..................................................................................................................................................... 14 4.1.1 Test Band = LTE-M1 BAND26(814MHz-824MHz) .......................................................................... 14 5 EMISSION MASK ........................................................................................................................................ 21 5.1 FOR LTE-M1 .............................................................................................................................................. 21 5.1.1 Test Band = LTE-M1 BAND26(814MHz-824MHz) .......................................................................... 21 6 SPURIOUS EMISSION AT ANTENNA TERMINAL .................................................................................. 26 6.1 FOR LTE-M1 .............................................................................................................................................. 26 6.1.1 Test Band = LTE-M1 BAND26(814MHz-824MHz) .......................................................................... 26 7 FIELD STRENGTH OF SPURIOUS RADIATION ..................................................................................... 30 7.1 FOR LTE-M1 .............................................................................................................................................. 30 7.1.1 Test Band = LTE-M1 BAND26(814MHz-824MHz) .......................................................................... 30 8 FREQUENCY STABILITY .......................................................................................................................... 32 FREQUENCY ERROR VS. VOLTAGE ........................................................................................................... 32 FREQUENCY ERROR VS. TEMPERATURE .................................................................................................. 33 8.1 8.2 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 3 of 34 1 Effective (Isotropic) Radiated Power Output Data Effective Isotropic Radiated Power of Transmitter (ERP) for LTE-M1 BAND26 Test Band(LTE) Test Mode Test Test Bandwidth channel Test RB Measured
(dBm) ERP
(dBm) limit
(dBm) Verdict LCH BAND26 LTE-
M1/TM1 1.4M MCH HCH RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 23.27 23.25 22.25 23.26 23.18 22.24 23.23 23.25 22.27 19.72 19.7 18.7 19.71 19.63 18.69 19.68 19.7 18.72 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 PASS PASS PASS PASS PASS PASS PASS PASS PASS Test Band(LTE) Test Mode Test Test Bandwidth channel Test RB Measured
(dBm) ERP
(dBm) limit
(dBm) Verdict LCH BAND26 LTE-
M1/TM2 1.4M MCH HCH RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 22.36 22.46 21.15 22.49 22.44 21.22 22.47 22.57 21.13 18.81 18.91 17.6 18.94 18.89 17.67 18.92 19.02 17.58 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 PASS PASS PASS PASS PASS PASS PASS PASS PASS Test Band(LTE) Test Mode Test Test Bandwidth channel Test RB Measured
(dBm) ERP
(dBm) limit
(dBm) Verdict LCH BAND26 LTE-
M1/TM1 3M MCH HCH RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 23.18 23.16 22.23 23.13 23.17 22.32 23.25 23.21 22.29 19.63 19.61 18.68 19.58 19.62 18.77 19.7 19.66 18.74 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 PASS PASS PASS PASS PASS PASS PASS PASS PASS Test Band(LTE) Test Mode Test Test Bandwidth channel Test RB Measured
(dBm) ERP
(dBm) limit
(dBm) Verdict BAND26 LTE-
M1/TM2 3M LCH MCH RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 22.31 22.37 21.11 22.42 22.27 21.19 18.76 18.82 17.56 18.87 18.72 17.64 50.00 50.00 50.00 50.00 50.00 50.00 PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 4 of 34 HCH RB1#0 RB1#5 RB6#0 22.43 22.35 21.16 18.88 18.8 17.61 50.00 50.00 50.00 PASS PASS PASS Test Band(LTE) Test Mode Test Test Bandwidth channel Test RB Measured
(dBm) ERP
(dBm) limit
(dBm) Verdict LCH BAND26 LTE-
M1/TM1 5M MCH HCH RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 23.13 23.23 22.15 23.16 23.17 22.21 23.23 23.07 22.28 19.58 19.68 18.6 19.61 19.62 18.66 19.68 19.52 18.73 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 PASS PASS PASS PASS PASS PASS PASS PASS PASS Test Band(LTE) Test Mode Test Test Bandwidth channel Test RB Measured
(dBm) ERP
(dBm) limit
(dBm) Verdict LCH BAND26 LTE-
M1/TM2 5M MCH HCH Test Band(LTE) Test Mode Test Test Bandwidth channel BAND26 LTE-
M1/TM1 10M MCH Test Band(LTE) Test Mode Test Test Bandwidth channel BAND26 LTE-
M1/TM2 10M MCH RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 Test RB RB1#0 RB1#5 RB6#0 Test RB RB1#0 RB1#5 RB6#0 22.68 22.75 21.18 22.75 22.67 21.33 22.64 22.67 21.19 19.13 19.2 17.63 19.2 19.12 17.78 19.09 19.12 17.64 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 PASS PASS PASS PASS PASS PASS PASS PASS PASS Measured
(dBm) ERP
(dBm) limit
(dBm) Verdict 23.03 23.12 22.24 19.48 19.57 18.69 50.00 50.00 50.00 PASS PASS PASS Measured
(dBm) ERP
(dBm) limit
(dBm) Verdict 22.48 22.63 21.22 18.93 19.08 17.67 50.00 50.00 50.00 PASS PASS PASS Note:
a: For getting the ERP (Efficient Radiated Power) in substitution method, the following formula should be taken to calculate it, ERP [dBm] = SGP [dBm] Cable Loss [dB] + Gain [dBd]
b: SGP=Signal Generator Level This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 5 of 34 2 Peak-to-Average Ratio Part I - Test Results Test Band Test Mode Test Channel Measured[dB]
Limit [dB]
Verdict BAND26 TM1/5M Full RB TM1/5M 1 RB TM2/5M Full RB TM2/5M 1 RB LCH MCH HCH LCH MCH HCH LCH MCH HCH LCH MCH HCH 5.19 4.87 4.93 4.64 4.72 4.49 5.62 5.80 5.74 5.13 5.28 5.10 13 13 13 13 13 13 13 13 13 13 13 13 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS Part II - Test Plots 2.1 For LTE-M1 2.1.1 Test Band = LTE-M1 BAND26(814MHz-824MHz) 2.1.1.1 Test Mode = LTE-M1/TM1.Bandwidth=5MHz Full RB 2.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 6 of 34 2.1.1.1.2 Test Channel = MCH 2.1.1.1.3 Test Channel = HCH 2.1.1.2 Test Mode = LTE-M1/TM1.Bandwidth=5MHz 1 RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 7 of 34 2.1.1.2.1 Test Channel = LCH 2.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 8 of 34 2.1.1.2.3 Test Channel = HCH 2.1.1.3 Test Mode = LTE-M1/TM2.Bandwidth=5MHz Full RB 2.1.1.3.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 9 of 34 2.1.1.3.2 Test Channel = MCH 2.1.1.3.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 10 of 34 2.1.1.4 Test Mode = LTE-M1/TM2.Bandwidth=5MHz 1 RB 2.1.1.4.1 Test Channel = LCH 2.1.1.4.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 11 of 34 2.1.1.4.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 12 of 34 3 Modulation Characteristics Part I - Test Plots 3.1 For LTE-M1 3.1.1 Test Band = LTE-M1 BAND26(814MHz-824MHz) 3.1.1.1 Test Mode = LTE-M1 /TM1 5MHz 3.1.1.1.1 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 13 of 34 3.1.1.2 Test Mode = LTE-M1 /TM2 5MHz 3.1.1.2.1 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 14 of 34 4 Bandwidth Part I - Test Results Test Band Test Mode Test Occupied Bandwidth Emission Channel
[MHz]
Bandwidth [MHz]
Verdict LCH MCH HCH LCH MCH HCH 1.10 1.10 1.10 1.11 1.11 1.11 1.38 1.40 1.40 1.48 1.47 1.46 PASS PASS PASS PASS PASS PASS BAND26 TM1/ 5MHz TM2/ 5MHz 4.1 For LTE 4.1.1 Test Band = LTE-M1 BAND26(814MHz-824MHz) 4.1.1.1 Test Mode = LTE-M1/TM1 5MHz 4.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 15 of 34 4.1.1.1.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 16 of 34 4.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 17 of 34 4.1.1.2 Test Mode = LTE-M1/TM2 5MHz 4.1.1.2.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 18 of 34 4.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 19 of 34 4.1.1.2.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 20 of 34 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 21 of 34 5 Emission Mask 5.1 For LTE-M1 5.1.1 Test Band = LTE-M1 BAND26(814MHz-824MHz) 5.1.1.1 Test Mode = LTE-M1/TM1 5MHz 5.1.1.1.1 Test Channel = LCH 5.1.1.1.1.1 Test RB=1RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 22 of 34 5.1.1.1.1.2 Test RB=6RB 5.1.1.1.2 Test Channel = HCH 5.1.1.1.2.1 Test RB=1RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 23 of 34 5.1.1.1.2.2 Test RB=6RB 5.1.1.2 Test Mode = LTE-M1/TM2 5MHz 5.1.1.2.1 Test Channel = LCH 5.1.1.2.1.1 Test RB=1RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 24 of 34 5.1.1.2.1.2 Test RB=6RB 5.1.1.2.2 Test Channel = HCH 5.1.1.2.2.1 Test RB=1RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 25 of 34 5.1.1.2.2.2 Test RB=6RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 26 of 34
[
6 Spurious Emission at Antenna Terminal NOTE1: For the averaged unwanted emissions measurements, the measurement points in each sweep is greater than twice the Span/RBW in order to ensure bin-to-bin spacing of < RBW/2 so that narrowband signals are not lost between frequency bins. As to the present test item, the "Measurement Points = k *
(Span / RBW)" with k between 4 and 5, which results in an acceptable level error of less than 0.5 dB. NOTE2: only the worst case data displayed in this report. Part I - Test Plots 6.1 For LTE-M1 6.1.1 Test Band = LTE-M1 BAND26(814MHz-824MHz) 6.1.1.1 Test Mode = LTE-M1 / TM1 5MHz RB1#0 6.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 27 of 34 6.1.1.1.2 Test Channel = MCH 6.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 28 of 34 6.1.1.2 Test Mode = LTE-M1 / TM2 5MHz RB1#0 6.1.1.2.1 Test Channel = LCH 6.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 29 of 34 6.1.1.2.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 30 of 34 7 Field Strength of Spurious Radiation 7.1 For LTE-M1 7.1.1 Test Band = LTE-M1 BAND26(814MHz-824MHz) 7.1.1.1 Test Mode =LTE-M1/TM1 5MHz RB1#0 7.1.1.1.1 Test Channel = LCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 64.533333 90.480000 977.816667 1629.000000 2442.500000 3257.400000 62.340000 977.725000 1629.000000 2443.500000 3256.912500 3445.575000
-81.98
-83.79
-55.84
-59.11
-54.78
-66.22
-78.22
-49.01
-56.45
-55.99
-65.30
-64.03
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-68.98
-70.79
-42.84
-46.11
-41.78
-53.22
-65.22
-36.01
-43.45
-42.99
-52.30
-51.03 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal 7.1.1.1.2 Test Channel = MCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 64.253333 653.820833 1634.000000 2450.500000 3267.150000 6534.862500 63.553333 633.791667 980.750000 1634.000000 2450.500000 3455.812500
-81.92
-60.45
-59.33
-55.56
-66.94
-64.38
-78.14
-63.99
-47.03
-56.21
-56.07
-64.08
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-68.92
-47.45
-46.33
-42.56
-53.94
-51.38
-65.14
-50.99
-34.03
-43.21
-43.07
-51.08 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 31 of 34 7.1.1.1.3 Test Channel = HCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 63.413333 90.480000 655.837500 1638.500000 2457.500000 3276.412500 62.993333 655.745833 983.775000 1638.500000 2457.500000 3465.562500 NOTE:
-82.38
-83.53
-67.75
-59.99
-55.45
-67.67
-77.84
-61.88
-46.90
-56.12
-55.55
-65.38
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-69.38
-70.53
-54.75
-46.99
-42.45
-54.67
-64.84
-48.88
-33.90
-43.12
-42.55
-52.38 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal 1) The disturbance above 13GHz and below 30MHz was very low, and the above harmonics were the highest point could be found when testing, so only the above harmonics had been displayed. 2) We have tested all modulation and all bandwidth, but only the worst case data presented in this report. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 32 of 34 8 Frequency Stability 8.1 Frequency Error VS. Voltage Test Band Test Mode Test Channel Test Temp. Test Volt. Freq. Error Freq. vs.
[Hz]
rated [ppm]
Verdict LCH TN LTE-M1/TM1 5MHz MCH TN HCH TN LCH TN LTE-M1/TM2 5MHz MCH TN HCH TN VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH
-10.51
-0.012876 PASS
-2.01
-5.44
-4.47
-4.15 5.35 9.78
-8.62
-2.37
-5.96 6.85
-6.06
-6.24 8.13
-4.01 6.86 3.88
-4.78
-0.002463 PASS
-0.006663 PASS
-0.005452 PASS
-0.005065 PASS 0.006532 PASS 0.011909 PASS
-0.010491 PASS
-0.002881 PASS
-0.007294 PASS 0.008388 PASS
-0.007423 PASS
-0.007625 PASS 0.009925 PASS
-0.004895 PASS 0.008347 PASS 0.004723 PASS
-0.005823 PASS LTE-M1 BAND26 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 33 of 34 8.2 Frequency Error VS. Temperature Test Band Test Mode Test Channel Test Volt. Test Temp.
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50 LCH VN LTE-M1 BAND26 LTE-M1/TM1 5MHz MCH VN HCH VN Freq. vs. rated [ppm]
Verdict Freq. Error
[Hz]
5.79 4.44 0.007097 0.005443
-8.69
-0.010645 0.90 4.97 0.001107 0.006084
-9.62
-0.011785
-4.27
-0.005225
-3.09
-0.003788
-1.89
-0.002320 7.21 3.16 8.45 9.06 0.008798 0.003853 0.010312 0.011058
-3.79
-0.004629
-5.27
-0.006432 3.77 0.004606
-3.90
-0.004757 2.60 9.39 7.01 4.24 8.53 0.003169 0.011430 0.008537 0.005158 0.010384
-7.41
-0.009020
-4.12
-0.005012 9.35 0.011378
-3.64
-0.004429 4.76 0.005794 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Test Band Test Mode Test Channel Test Volt. Test Temp.
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50 LCH VN LTE-M1 BAND26 LTE-M1/TM2 5MHz MCH VN HCH VN The End Report No.: SZEM180400321702 Page: 34 of 34 Freq. Error
[Hz]
Freq. vs. rated [ppm]
Verdict
-7.00
-0.008579 9.41 7.42 0.011531 0.009089
-8.53
-0.010449 7.50 3.11 8.02 0.009183 0.003809 0.009822
-6.35
-0.007782
-3.13
-0.003837 1.57 0.001912
-0.13
-0.000154 2.61 0.003186
-5.54
-0.006764 6.39 5.48 2.27 0.007797 0.006695 0.002768
-3.00
-0.003660
-4.58
-0.005595
-1.89
-0.002301 2.44 1.16 3.73 0.002970 0.001416 0.004538
-2.20
-0.002677
-5.53
-0.006736 6.67 0.008119
-6.16
-0.007499
-7.88
-0.009597 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
| 1 2 3 4 5 | Reference test report part 8 | Test Report | 5.46 MiB | August 02 2019 / August 05 2019 |
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 1 of 35 Appendix B LTE-M1 BAND 26(824MHz-849MHz) This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 1 2 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 2 of 35 CONTENT Page EFFECTIVE (ISOTROPIC) RADIATED POWER OUTPUT DATA ............................................................ 3 PEAK-TO-AVERAGE RATIO ....................................................................................................................... 6 2.1 FOR LTE-M1 ................................................................................................................................................ 6 2.1.1 Test Band = LTE-M1 BAND26(824MHz-849MHz) ............................................................................ 6 3 MODULATION CHARACTERISTICS ........................................................................................................ 13 3.1 FOR LTE-M1 .............................................................................................................................................. 13 3.1.1 Test Band = LTE-M1 BAND26(824MHz-849MHz) .......................................................................... 13 4 BANDWIDTH ............................................................................................................................................... 15 4.1 FOR LTE ..................................................................................................................................................... 15 4.1.1 Test Band = LTE-M1 BAND26(824MHz-849MHz) .......................................................................... 15 5 BAND EDGES COMPLIANCE ................................................................................................................... 22 5.1 FOR LTE-M1 .............................................................................................................................................. 22 5.1.1 Test Band = LTE-M1 BAND26(824MHz-849MHz) .......................................................................... 22 6 SPURIOUS EMISSION AT ANTENNA TERMINAL .................................................................................. 27 6.1 FOR LTE-M1 .............................................................................................................................................. 27 6.1.1 Test Band = LTE-M1 BAND26(824MHz-849MHz) .......................................................................... 27 7 FIELD STRENGTH OF SPURIOUS RADIATION ..................................................................................... 31 7.1 FOR LTE-M1 .............................................................................................................................................. 31 7.1.1 Test Band = LTE-M1 BAND26(824MHz-849MHz) .......................................................................... 31 8 FREQUENCY STABILITY .......................................................................................................................... 33 FREQUENCY ERROR VS. VOLTAGE ........................................................................................................... 33 FREQUENCY ERROR VS. TEMPERATURE .................................................................................................. 34 8.1 8.2 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 3 of 35 1 Effective (Isotropic) Radiated Power Output Data Effective Isotropic Radiated Power of Transmitter (EIRP) for LTE-M1 BAND 26 Test Band(LTE) Test Mode Test Test Bandwidth channel Test RB Measured
(dBm) ERP
(dBm) limit
(dBm) Verdict LCH BAND26 LTE-
M1/TM1 1.4M MCH HCH RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 23.3 23.31 22.27 23.19 23.22 22.19 23.19 23.23 22.21 19.75 19.76 18.72 19.64 19.67 18.64 19.64 19.68 18.66 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 PASS PASS PASS PASS PASS PASS PASS PASS PASS Test Band(LTE) Test Mode Test Test Bandwidth channel Test RB Measured
(dBm) ERP
(dBm) limit
(dBm) Verdict LCH BAND26 LTE-
M1/TM2 1.4M MCH HCH RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 22.48 22.52 21.06 22.44 22.6 21.12 22.44 22.57 21.26 18.93 18.97 17.51 18.89 19.05 17.57 18.89 19.02 17.71 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 PASS PASS PASS PASS PASS PASS PASS PASS PASS Test Band(LTE) Test Mode Test Test Bandwidth channel Test RB Measured
(dBm) ERP
(dBm) limit
(dBm) Verdict LCH BAND26 LTE-
M1/TM1 3M MCH HCH RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 23.15 23.19 22.17 23.28 23.2 22.26 23.14 23.17 22.22 19.6 19.64 18.62 19.73 19.65 18.71 19.59 19.62 18.67 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 PASS PASS PASS PASS PASS PASS PASS PASS PASS Test Band(LTE) Test Mode Test Test Bandwidth channel Test RB Measured
(dBm) ERP
(dBm) limit
(dBm) Verdict BAND26 LTE-
M1/TM2 3M LCH MCH RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 22.23 22.43 21.22 22.42 22.47 21.21 18.68 18.88 17.67 18.87 18.92 17.66 38.45 38.45 38.45 38.45 38.45 38.45 PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 4 of 35 HCH RB1#0 RB1#5 RB6#0 22.32 22.36 21.22 18.77 18.81 17.67 38.45 38.45 38.45 PASS PASS PASS Test Band(LTE) Test Mode Test Test Bandwidth channel Test RB Measured
(dBm) ERP
(dBm) limit
(dBm) Verdict LCH BAND26 LTE-
M1/TM1 5M MCH HCH RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 23.24 23.18 22.21 23.21 23.28 22.33 23.23 23.26 22.29 19.69 19.63 18.66 19.66 19.73 18.78 19.68 19.71 18.74 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 PASS PASS PASS PASS PASS PASS PASS PASS PASS Test Band(LTE) Test Mode Test Test Bandwidth channel Test RB Measured
(dBm) ERP
(dBm) limit
(dBm) Verdict LCH BAND26 LTE-
M1/TM2 5M MCH HCH RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 22.75 22.68 21.37 22.74 22.65 21.34 22.45 22.66 21.35 19.2 19.13 17.82 19.19 19.1 17.79 18.9 19.11 17.8 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 PASS PASS PASS PASS PASS PASS PASS PASS PASS Test Band(LTE) Test Mode Test Test Bandwidth channel Test RB Measured
(dBm) ERP
(dBm) limit
(dBm) Verdict LCH BAND26 LTE-
M1/TM1 10M MCH HCH RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 23.27 23.32 22.28 23.23 23.26 22.26 23.33 23.23 22.4 19.72 19.77 18.73 19.68 19.71 18.71 19.78 19.68 18.85 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 PASS PASS PASS PASS PASS PASS PASS PASS PASS Test Band(LTE) Test Mode Test Test Bandwidth channel Test RB Measured
(dBm) ERP
(dBm) limit
(dBm) Verdict BAND26 LTE-
M1/TM2 10M LCH MCH HCH RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 RB1#0 22.63 22.65 21.36 22.73 22.64 21.39 22.71 19.08 19.1 17.81 19.18 19.09 17.84 19.16 38.45 38.45 38.45 38.45 38.45 38.45 38.45 PASS PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 5 of 35 RB1#5 RB6#0 22.69 21.36 19.14 17.81 38.45 38.45 PASS PASS Test Band(LTE) Test Mode Test Test Bandwidth channel Test RB Measured
(dBm) ERP
(dBm) limit
(dBm) Verdict LCH BAND26 LTE-
M1/TM1 15M MCH HCH RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 23.18 23.28 22.38 23.18 23.29 22.25 23.26 23.29 22.33 19.63 19.73 18.83 19.63 19.74 18.7 19.71 19.74 18.78 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 PASS PASS PASS PASS PASS PASS PASS PASS PASS Test Band(LTE) Test Mode Test Test Bandwidth channel Test RB Measured
(dBm) ERP
(dBm) limit
(dBm) Verdict LCH BAND26 LTE-
M1/TM2 15M MCH HCH RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 RB1#0 RB1#5 RB6#0 22.67 22.72 21.44 22.59 22.63 21.37 22.69 22.57 21.38 19.12 19.17 17.89 19.04 19.08 17.82 19.14 19.02 17.83 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 38.45 PASS PASS PASS PASS PASS PASS PASS PASS PASS Note:
a: For getting the ERP (Efficient Radiated Power) in substitution method, the following formula should be taken to calculate it, ERP [dBm] = SGP [dBm] Cable Loss [dB] + Gain [dBd]
b: SGP=Signal Generator Level This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 6 of 35 2 Peak-to-Average Ratio Part I - Test Results Test Band Test Mode Test Channel Measured[dB]
Limit [dB]
Verdict Band 2 TM1/5M Full RB TM1/5M 1 RB TM2/5M Full RB TM2/5M 1 RB LCH MCH HCH LCH MCH HCH LCH MCH HCH LCH MCH HCH 4.99 5.07 5.97 5.45 4.72 6.84 5.74 5.88 5.94 5.36 5.25 6.29 13 13 13 13 13 13 13 13 13 13 13 13 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS Part II - Test Plots 2.1 For LTE-M1 2.1.1 Test Band = LTE-M1 BAND26(824MHz-849MHz) 2.1.1.1 Test Mode = LTE-M1/TM1.Bandwidth=5MHz Full RB 2.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 7 of 35 2.1.1.1.2 Test Channel = MCH 2.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 8 of 35 2.1.1.2 Test Mode = LTE-M1/TM1.Bandwidth=5MHz 1 RB 2.1.1.2.1 Test Channel = LCH 2.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 9 of 35 2.1.1.2.3 Test Channel = HCH 2.1.1.3 Test Mode = LTE-M1/TM2.Bandwidth=5MHz Full RB 2.1.1.3.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 10 of 35 2.1.1.3.2 Test Channel = MCH 2.1.1.3.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 11 of 35 2.1.1.4 Test Mode = LTE-M1/TM2.Bandwidth=5MHz 1 RB 2.1.1.4.1 Test Channel = LCH 2.1.1.4.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 12 of 35 2.1.1.4.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 13 of 35 3 Modulation Characteristics Part I - Test Plots 3.1 For LTE-M1 3.1.1 Test Band = LTE-M1 BAND26(824MHz-849MHz) 3.1.1.1 Test Mode = LTE-M1 /TM1 5MHz 3.1.1.1.1 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 14 of 35 3.1.1.2 Test Mode = LTE-M1 /TM2 5MHz 3.1.1.2.1 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 15 of 35 4 Bandwidth Part I - Test Results Test Band Test Mode Test Occupied Bandwidth Emission Channel
[MHz]
Bandwidth [MHz]
Verdict BAND26 TM1/ 5MHz TM2/ 5MHz 4.1 For LTE LCH MCH HCH LCH MCH HCH 1.10 1.12 1.10 1.11 1.11 1.11 1.40 1.40 1.41 1.46 1.45 1.44 PASS PASS PASS PASS PASS PASS 4.1.1 Test Band = LTE-M1 BAND26(824MHz-849MHz) 4.1.1.1 Test Mode = LTE-M1/TM1 5MHz 4.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 16 of 35 4.1.1.1.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 17 of 35 4.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 18 of 35 4.1.1.2 Test Mode = LTE-M1/TM2 5MHz 4.1.1.2.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 19 of 35 4.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 20 of 35 4.1.1.2.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 21 of 35 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 22 of 35 5 Band Edges Compliance 5.1 For LTE-M1 5.1.1 Test Band = LTE-M1 BAND26(824MHz-849MHz) 5.1.1.1 Test Mode = LTE-M1/TM1 5MHz 5.1.1.1.1 Test Channel = LCH 5.1.1.1.1.1 Test RB=1RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 23 of 35 5.1.1.1.1.2 Test RB=6RB 5.1.1.1.2 Test Channel = HCH 5.1.1.1.2.1 Test RB=1RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 24 of 35 5.1.1.1.2.2 Test RB=6RB 5.1.1.2 Test Mode = LTE-M1/TM2 5MHz 5.1.1.2.1 Test Channel = LCH 5.1.1.2.1.1 Test RB=1RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 25 of 35 5.1.1.2.1.2 Test RB=6RB 5.1.1.2.2 Test Channel = HCH 5.1.1.2.2.1 Test RB=1RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 26 of 35 5.1.1.2.2.2 Test RB=6RB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 27 of 35
[
6 Spurious Emission at Antenna Terminal NOTE1: For the averaged unwanted emissions measurements, the measurement points in each sweep is greater than twice the Span/RBW in order to ensure bin-to-bin spacing of < RBW/2 so that narrowband signals are not lost between frequency bins. As to the present test item, the "Measurement Points = k *
(Span / RBW)" with k between 4 and 5, which results in an acceptable level error of less than 0.5 dB. NOTE2: only the worst case data displayed in this report. Part I - Test Plots 6.1 For LTE-M1 6.1.1 Test Band = LTE-M1 BAND26(824MHz-849MHz) 6.1.1.1 Test Mode = LTE-M1 / TM1 5MHz RB1#0 6.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 28 of 35 6.1.1.1.2 Test Channel = MCH 6.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 29 of 35 6.1.1.2 Test Mode = LTE-M1 / TM2 5MHz RB1#0 6.1.1.2.1 Test Channel = LCH 6.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 30 of 35 6.1.1.2.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 31 of 35 7 Field Strength of Spurious Radiation 7.1 For LTE-M1 7.1.1 Test Band = LTE-M1 BAND26(824MHz-849MHz) 7.1.1.1 Test Mode =LTE-M1/TM1 5MHz RB1#0 7.1.1.1.1 Test Channel = LCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 64.346667 658.908333 989.733333 1648.500000 2472.500000 3296.887500 62.340000 659.000000 989.733333 1648.500000 2472.500000 3297.375000
-82.03
-67.51
-59.97
-60.66
-57.98
-65.53
-77.85
-65.20
-48.34
-58.38
-57.41
-64.83
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-69.03
-54.51
-46.97
-47.66
-44.98
-52.53
-64.85
-52.20
-35.34
-45.38
-44.41
-51.83 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal 7.1.1.1.2 Test Channel = MCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 63.786667 648.595833 1001.000000 1668.500000 2502.500000 3336.862500 61.733333 667.845833 1001.500000 1668.500000 3336.862500 6486.112500
-82.38
-72.31
-58.87
-64.17
-58.02
-68.15
-78.81
-61.97
-53.15
-60.65
-65.85
-65.57
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-69.38
-59.31
-45.87
-51.17
-45.02
-55.15
-65.81
-48.97
-40.15
-47.65
-52.85
-52.57 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 32 of 35 7.1.1.1.3 Test Channel = HCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 63.273333 675.775000 1013.500000 1689.000000 2533.000000 3377.325000 63.040000 675.820833 1013.500000 1689.000000 2532.500000 3377.325000 NOTE:
-82.61
-67.26
-59.25
-63.26
-58.91
-66.36
-77.72
-61.53
-53.53
-62.08
-59.36
-65.75
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-69.61
-54.26
-46.25
-50.26
-45.91
-53.36
-64.72
-48.53
-40.53
-49.08
-46.36
-52.75 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal 1) The disturbance above 13GHz and below 30MHz was very low, and the above harmonics were the highest point could be found when testing, so only the above harmonics had been displayed. 2) We have tested all modulation and all bandwidth, but only the worst case data presented in this report. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 33 of 35 8 Frequency Stability 8.1 Frequency Error VS. Voltage Test Band Test Mode Test Channel Test Temp. Test Volt. Freq. Error Freq. vs.
[Hz]
rated [ppm]
Verdict LCH TN LTE-M1/TM1 5MHz MCH TN HCH TN LCH TN LTE-M1/TM2 5MHz MCH TN HCH TN VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH
-14.45
-0.017525 2.26
-9.05
-7.44
-4.04
-5.85
-8.13 1.75
-1.06 4.75 4.09 8.68 7.99
-5.73
-1.63 0.99 1.56 5.18 0.002737
-0.010978
-0.008894
-0.004826
-0.006995
-0.009582 0.002066
-0.001255 0.005757 0.004955 0.010526 0.009547
-0.006847
-0.001951 0.001164 0.001834 0.006112 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS LTE-M1 BAND26 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 34 of 35 8.2 Frequency Error VS. Temperature Test Band Test Mode Test Channel Test Volt. Test Temp. Freq. Error
[Hz]
Freq. vs. rated [ppm]
Verdict
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50 8.22 0.009964
-5.52
-0.006693 7.69 0.009327
-4.79
-0.005809 1.92 5.10 3.21 0.002330 0.006185 0.003895
-5.78
-0.007004
-6.17
-0.007477 2.43 4.11 0.002904 0.004912
-4.15
-0.004961 1.45 0.001734
-4.02
-0.004811
-2.04
-0.002440
-0.39
-0.000464
-1.29
-0.001540 6.30 9.16 6.48 5.65 1.99 0.007528 0.010801 0.007643 0.006656 0.002349
-0.88
-0.001041 2.79 6.27 0.003287 0.007394
-7.03
-0.008292
-9.02
-0.010635 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS LCH VN LTE-M1 BAND26 LTE-M1/TM1 5MHz MCH VN HCH VN This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Test Band Test Mode Test Channel Test Volt. Test Temp.
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50 LCH VN LTE-M1 BAND26 LTE-M1/TM2 5MHz MCH VN HCH VN The End Report No.: SZEM180400321702 Page: 35 of 35 Freq. Error
[Hz]
Freq. vs. rated [ppm]
Verdict
-9.27
-0.011245
-4.61
-0.005588 0.35 7.54 0.000420 0.009142
-8.26
-0.010011 2.94 0.003565
-3.94
-0.004772 5.78 7.63 0.007013 0.009251
-1.62
-0.001932
-8.11
-0.009692
-8.68
-0.010371
-0.35
-0.000416
-1.14
-0.001363
-0.81
-0.000971 3.28 2.16 0.003916 0.002582
-3.11
-0.003721 9.44 2.94 2.98 0.011133 0.003462 0.003513
-7.27
-0.008572 0.62 0.000731
-9.93
-0.011701 4.51 4.39 0.005312 0.005175
-8.98
-0.010589 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
| 1 2 3 4 5 | Reference test report part 9 | Test Report | 5.53 MiB | August 02 2019 / August 05 2019 |
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 1 of 44 Appendix B LTE-NB1 BAND2 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 1 2 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 2 of 44 CONTENT Page EFFECTIVE (ISOTROPIC) RADIATED POWER OUTPUT DATA ............................................................3 PEAK-TO-AVERAGE RATIO ........................................................................................................................4 2.1 FOR LTE-NB1 ...............................................................................................................................................4 2.1.1 Test Band = LTE-NB1 BAND2 ..............................................................................................................4 3 MODULATION CHARACTERISTICS ..........................................................................................................9 3.1 FOR LTE-NB1 ...............................................................................................................................................9 3.1.1 Test Band = LTE-NB1 BAND2 ..............................................................................................................9 4 BANDWIDTH ................................................................................................................................................11 4.1 FOR LTE-NB1 .............................................................................................................................................11 4.1.1 Test Band = LTE-NB1 BAND2 ............................................................................................................11 5 BAND EDGES COMPLIANCESS ...............................................................................................................15 5.1 FOR LTE-NB1 .............................................................................................................................................15 5.1.1 Test Band = LTE-NB1 BAND2 ............................................................................................................15 6 SPURIOUS EMISSION AT ANTENNA TERMINAL ..................................................................................21 6.1 FOR LTE-NB1 .............................................................................................................................................21 6.1.1 Test Band = LTE-NB1 BAND2 ............................................................................................................21 7 FIELD STRENGTH OF SPURIOUS RADIATION .....................................................................................40 7.1 FOR LTE-NB1 .............................................................................................................................................40 7.1.1 Test Band = LTE-NB1 BAND2 ............................................................................................................40 8 FREQUENCY STABILITY ...........................................................................................................................42 8.1 8.2 FREQUENCY ERROR VS. VOLTAGE ............................................................................................................42 FREQUENCY ERROR VS. TEMPERATURE ...................................................................................................43 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 3 of 44 Test
(kHz) Number channel Spacing Measured Test Band Test Mode Sub-carrier 1 Effective (Isotropic) Radiated Power Output Data Effective Isotropic Radiated Power of Transmitter (EIRP) for LTE-NB1 BAND2 EIRP
(dBm) 23.23 22.97 23.55 23.82 23.51 23.46 23.73 23.95 23.48 23.53 23.69 23.41
(dBm) 22.13 22.87 22.45 22.72 22.41 22.36 22.63 22.85 22.38 22.43 22.59 22.31 of T 1T0 1T47 1T0 1T47 1T0 1T47 1T0 1T47 1T0 1T47 1T0 1T47 BAND2 MCH MCH HCH HCH TM2 TM1 LCH LCH 3.75 3.75 Test Band Test Mode Sub-carrier Spacin
(kHz) Test channel TM1 15 BAND2 LCH MCH HCH LCH TM2 15 MCH HCH Number Measured of T 1T0 1T11 1T0 1T11 1T0 1T11 1T0 1T11 12T0 1T0 1T11 12T0 1T0 1T11 12T0
(dBm) 22.56 22.45 22.77 22.76 22.63 22.75 21.61 21.63 20.34 22.72 22.79 20.93 22.61 22.56 20.75 EIRP
(dBm) 23.66 23.55 23.87 23.86 23.73 23.85 22.71 22.63 21.44 23.82 23.89 22.03 23.71 23.66 21.85 limit
(dBm) Verdict PASS 33.00 33.00 PASS PASS 33.00 PASS 33.00 33.00 PASS PASS 33.00 PASS 33.00 PASS 33.00 33.00 PASS PASS 33.00 PASS 33.00 33.00 PASS limit
(dBm) Verdict 33.00 PASS PASS 33.00 PASS 33.00 PASS 33.00 33.00 PASS PASS 33.00 PASS 33.00 PASS 33.00 33.00 PASS PASS 33.00 PASS 33.00 33.00 PASS PASS 33.00 PASS 33.00 33.00 PASS Note:
a: For getting the EIRP (Efficient Isotropic Radiated Power) in substitution method, the following formula should be taken to calculate it, EIRP [dBm] = SGP [dBm] Cable Loss [dB] + Gain [dBi]
b: SGP=Signal Generator Level This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 4 of 44 2 Peak-to-Average Ratio Part I - Test Results Test Band Test Mode Test Channel Measured[dB]
Limit [dB]
TM1/1T BAND2 TM2/1T TM2/Full T LCH MCH HCH LCH MCH HCH LCH MCH HCH 4.12 4.58 4.55 4.55 4.09 4.67 2.61 2.35 2.55 13 13 13 13 13 13 13 13 13 Verdict PASS PASS PASS PASS PASS PASS PASS PASS PASS Part II - Test Plots 2.1 For LTE-NB1 2.1.1 Test Band = LTE-NB1 BAND2 2.1.1.1 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=15kHz.T size=1T0 2.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 5 of 44 2.1.1.1.2 Test Channel = MCH 2.1.1.1.3 Test Channel = HCH 2.1.1.2 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz.T size=1T0 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 6 of 44 2.1.1.2.1 Test Channel = LCH 2.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 7 of 44 2.1.1.2.3 Test Channel = HCH 2.1.1.3 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz.T size=12T0 2.1.1.3.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 8 of 44 2.1.1.3.2 Test Channel = MCH 2.1.1.3.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 9 of 44 3 Modulation Characteristics Part I - Test Plots 3.1 For LTE-NB1 3.1.1 Test Band = LTE-NB1 BAND2 3.1.1.1 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=15kHz.T size=1T0 3.1.1.1.1 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 10 of 44 3.1.1.2 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz.T size=12T0 3.1.1.2.1 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 4 Bandwidth Part I - Test Results Test Band Test Mode BAND2 TM2/15kHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 11 of 44 Test Channel LCH MCH HCH Occupied Bandwidth
[kHz]
184.61 186.61 186.61 Emission Bandwidth [kHz]
242.96 242.16 242.16 Verdict PASS PASS PASS 4.1 For LTE-NB1 4.1.1 Test Band = LTE-NB1 BAND2 4.1.1.1 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz.T size=12T0 4.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 12 of 44 4.1.1.1.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 13 of 44 4.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 14 of 44 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 15 of 44 5 Band Edges Compliance 5.1 For LTE-NB1 5.1.1 Test Band = LTE-NB1 BAND2 5.1.1.1 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=3.75kHz 5.1.1.1.1 Test Channel = LCH 5.1.1.1.1.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 16 of 44 5.1.1.1.2 Test Channel = HCH 5.1.1.1.2.1 Test T size=1T 5.1.1.2 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=3.75kHz 5.1.1.2.1 Test Channel = LCH 5.1.1.2.1.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 17 of 44 5.1.1.2.2 Test Channel = HCH 5.1.1.2.2.1 Test T size=1T 5.1.1.3 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=15kHz 5.1.1.3.1 Test Channel = LCH 5.1.1.3.1.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 18 of 44 5.1.1.3.2 Test Channel = HCH 5.1.1.3.2.1 Test T size=1T 5.1.1.4 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz 5.1.1.4.1 Test Channel = LCH 5.1.1.4.1.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 19 of 44 5.1.1.4.1.2 Test T size=Full T 5.1.1.4.2 Test Channel = HCH 5.1.1.4.2.1 Test T size=1T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 20 of 44 5.1.1.4.2.2 Test T size=Full T This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 21 of 44
[
6 Spurious Emission at Antenna Terminal NOTE1: For the averaged unwanted emissions measurements, the measurement points in each sweep is greater than twice the Span/RBW in order to ensure bin-to-bin spacing of < RBW/2 so that narrowband signals are not lost between frequency bins. As to the present test item, the "Measurement Points = k *
(Span / RBW)" with k between 4 and 5, which results in an acceptable level error of less than 0.5 dB. NOTE2: only the worst case data displayed in this report. Part I - Test Plots 6.1 For LTE-NB1 6.1.1 Test Band = LTE-NB1 BAND2 6.1.1.1 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=3.75kHz 6.1.1.1.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 22 of 44 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 23 of 44 6.1.1.1.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 24 of 44 6.1.1.1.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 25 of 44 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 26 of 44 6.1.1.2 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=3.75kHz 6.1.1.2.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 27 of 44 6.1.1.2.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 28 of 44 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 29 of 44 6.1.1.2.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 30 of 44 6.1.1.3 Test Mode = LTE-NB1/TM1.Sub-carrier spacing=15kHz 6.1.1.3.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 31 of 44 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 32 of 44 6.1.1.3.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 33 of 44 6.1.1.3.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 34 of 44 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 35 of 44 6.1.1.4 Test Mode = LTE-NB1/TM2.Sub-carrier spacing=15kHz 6.1.1.4.1 Test Channel = LCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 36 of 44 6.1.1.4.2 Test Channel = MCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 37 of 44 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 38 of 44 6.1.1.4.3 Test Channel = HCH This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 39 of 44 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 40 of 44 7 Field Strength of Spurious Radiation 7.1 For LTE-NB1 7.1.1 Test Band = LTE-NB1 BAND2 7.1.1.1 Test Mode =LTE-NB1/ Sub-carrier spacing=3.75kHz 7.1.1.1.1 Test Channel = LCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 64.950000 104.250000 780.595833 1236.000000 3704.600000 8632.250000 62.350000 104.300000 798.929167 1213.000000 3705.575000 7843.150000
-81.79
-85.64
-80.81
-66.66
-44.85
-63.90
-77.67
-85.10
-80.55
-67.23
-52.19
-64.25
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-68.79
-72.64
-67.81
-53.66
-31.85
-50.90
-64.67
-72.10
-67.55
-54.23
-39.19
-51.25 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal 7.1.1.1.2 Test Channel = MCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization
-83.13
-84.18
-66.53
-53.10
-52.76
-53.09
-77.86
-85.02
-62.55
-44.70
-53.18
-63.95
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-70.13
-71.18
-53.53
-40.10
-39.76
-40.09
-64.86
-72.02
-49.55
-31.70
-40.18
-50.95 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal 55.100000 104.250000 1271.000000 3759.525000 5639.650000 7520.100000 63.150000 104.300000 1234.000000 3759.200000 5639.975000 9242.275000 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 41 of 44 7.1.1.1.3 Test Channel = HCH Frequency (MHz) Level (dBm) Limit Line (dBm) Over Limit (dB) Polarization 64.150000 104.250000 1194.000000 3814.775000 5722.525000 9235.775000 62.350000 104.300000 1258.500000 3814.450000 5722.200000 7629.950000
-81.81
-77.76
-66.69
-50.55
-64.88
-64.30
-77.89
-83.83
-62.56
-44.53
-64.94
-60.20
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-13.00
-68.81
-64.76
-53.69
-37.55
-51.88
-51.30
-64.89
-70.83
-49.56
-31.53
-51.94
-47.20 Vertical Vertical Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal NOTE:
1) The disturbance above 13GHz and below 30MHz was very low, and the above harmonics were the highest point could be found when testing, so only the above harmonics had been displayed. 2) We have tested all modulation and all bandwidth, but only the worst case data presented in this report. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 42 of 44 8 Frequency Stability 8.1 Frequency Error VS. Voltage Test Band Test Mode Test Channel Test Temp. LCH TN TM1/15k MCH TN HCH TN LCH TN TM2/15k MCH TN HCH TN BAND2 Test Volt. VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH VL VN VH Freq. Error
[Hz]
5.44 6.92 1.02
-0.60
-2.46
-2.61
-1.39
-4.62
-5.36 7.41 7.01
-9.63
-5.24
-7.01
-0.46
-6.77
-3.29 8.84 Freq. vs. rated [ppm] Verdict PASS 0.002941 PASS 0.003741 PASS 0.000550 PASS
-0.000319 PASS
-0.001310 PASS
-0.001388 PASS
-0.000730 PASS
-0.002418 PASS
-0.002809 PASS 0.004006 PASS 0.003790 PASS
-0.005206 PASS
-0.002787 PASS
-0.003730 PASS
-0.000246 PASS
-0.003548 PASS
-0.001724 PASS 0.004630 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 43 of 44 8.2 Frequency Error VS. Temperature Test Band Test Mode Test Channel Test Volt. Test Temp.
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50 LCH VN BAND2 TM1 15kHz MCH VN HCH VN Freq. Error
[Hz]
-6.60
-7.12
-0.43
-8.41 4.12
-1.39
-8.78 1.80
-5.79
-8.85
-5.37
-3.42 0.06
-9.04
-6.17
-9.81
-5.61 6.98
-4.20
-8.66
-9.94 5.11
-4.47 5.16 5.73 3.77
-9.63 Freq. vs. rated [ppm]
Verdict
-0.003566
-0.003850
-0.000232
-0.004545 0.002228
-0.000751
-0.004748 0.000971
-0.003131
-0.004707
-0.002857
-0.001818 0.000034
-0.004808
-0.003281
-0.005217
-0.002986 0.003711
-0.002201
-0.004539
-0.005207 0.002678
-0.002341 0.002703 0.003001 0.001974
-0.005044 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 44 of 44 Test Band Test Mode Test Channel Test Volt. Test Temp.
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50
-30
-20
-10 0 10 20 30 40 50 LCH VN BAND2 TM2 15kHz MCH VN HCH VN The End Freq. Error
[Hz]
-6.13 1.21 7.86
-1.28 2.02
-4.42
-0.46
-9.72
-2.52 9.34
-4.10
-2.15 3.32
-5.85 3.37 4.87 9.31
-7.32
-2.32
-6.07 5.19 2.69
-5.15 6.54 3.09
-1.70
-5.86 Freq. vs. rated [ppm]
Verdict
-0.003313 0.000653 0.004248
-0.000693 0.001093
-0.002391
-0.000248
-0.005255
-0.001362 0.004970
-0.002181
-0.001143 0.001766
-0.003112 0.001794 0.002589 0.004950
-0.003894
-0.001216
-0.003182 0.002721 0.001410
-0.002699 0.003428 0.001621
-0.000889
-0.003068 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
| 1 2 3 4 5 | Test report | Test Report | 1.18 MiB | August 02 2019 / August 05 2019 |
FCC RF Test Report Report No. : FG961801B FCC RF Test Report APPLICANT
: PAX Technology Limited EQUIPMENT
: Mobile Payment Terminal BRAND NAME MODEL NAME
: PAX
: D190 FCC ID
: V5PD190LTE STANDARD
: 47 CFR Part 2, 22(H), 24(E), 27(L), 27(F), 27(H) CLASSIFICATION
: PCS Licensed Transmitter (PCB) The product was installed a module during the test: LTE (CatM1,NB-IO) Module (Model Name:
M910-GL, FCC ID: ZMOM910GL ) during test. The product was received on Jun. 17, 2019 and completely tested on Jun. 25, 2019. We, Sporton International (ShenZhen) Inc., would like to declare that the tested sample has been evaluated in accordance with the procedures given in ANSI C63.26-2015 and shown compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of Sporton International (ShenZhen) Inc., the test report shall not be reproduced except in full. Reviewed by: Derreck Chen / Supervisor Approved by: Eric Shih / Manager Sporton International (ShenZhen) Inc. 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen, 518055 Peoples Republic of China Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 1 of 20 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B TABLE OF CONTENTS REVISION HISTORY .......................................................................................................................................... 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .......................................................................................................................... 5 1.1 Applicant ............................................................................................................................................ 5 1.2 Product Feature of Equipment Under Test ........................................................................................ 5 1.3 Product Specification of Equipment Under Test ................................................................................ 6 1.4 Modification of EUT ........................................................................................................................... 6 1.5 Maximum ERP/EIRP Power, Frequency Tolerance, and Emission Designator ............................... 7 1.6 Testing Location ................................................................................................................................ 9 1.7 Applicable Standards ......................................................................................................................... 9 2 TEST CONFIGURATION OF EQUIPMENT UNDER TEST ...................................................................... 10 2.1 Test Mode ........................................................................................................................................ 10 2.2 Connection Diagram of Test System ............................................................................................... 11 2.3 Support Unit used in test configuration and system ........................................................................ 11 2.4 Frequency List of Low/Middle/High Channels ................................................................................. 12 3 CONDUCTED TEST ITEMS ...................................................................................................................... 15 3.1 Measuring Instruments .................................................................................................................... 15 3.2 Test Setup ....................................................................................................................................... 15 3.3 Test Result of Conducted Test ........................................................................................................ 15 3.4 Conducted Output Power and ERP/EIRP ....................................................................................... 16 4 RADIATED TEST ITEMS .......................................................................................................................... 17 4.1 Measuring Instruments .................................................................................................................... 17 4.2 Test Setup ....................................................................................................................................... 17 4.3 Test Result of Radiated Test ........................................................................................................... 17 4.4 Radiated Spurious Emission ........................................................................................................... 18 5 LIST OF MEASURING EQUIPMENT ........................................................................................................ 19 6 UNCERTAINTY OF EVALUATION ........................................................................................................... 20 APPENDIX A. TEST RESULTS OF CONDUCTED TEST APPENDIX B. TEST RESULTS OF RADIATED TEST APPENDIX C. TEST SETUP PHOTOGRAPHS Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 2 of 20 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B REVISION HISTORY REPORT NO. VERSION DESCRIPTION ISSUED DATE FG961801B Rev. 01 Initial issue of report Jul. 29, 2019 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 3 of 20 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B SUMMARY OF TEST RESULT Report Section FCC Rule Description Limit Result Remark 2.1046 Conducted Output Power Reporting Only PASS
-
22.913(a)(5) 27.50(b)(10) 27.50(c)(10) 24.232(c) Effective Radiated Power
(Band 5) (Band 26) Effective Radiated Power
(Band 12) (Band 13) ERP < 7 Watt PASS ERP < 3 Watt PASS Equivalent Isotropic Radiated Power
(Band 2) EIRP < 2Watt PASS 27.50(d)(4) Equivalent Isotropic Radiated Power
(Band 4) EIRP < 1Watt PASS 24.232(d) Peak-to-Average Ratio
<13 dB PASS 2.1049 Occupied Bandwidth Reporting Only PASS 1 1 2.1051 22.917(a) 24.238(a) Conducted Band Edge Measurement
(Band 2) (Band 4) (Band 5) 27.53(c)(2)(4)
(Band 12) (Band 13)
< 43+10log10(P[Watts]) PASS 1 27.53(g) 27.53(h) 2.1051 22.917(a) 24.238(a) 27.53(c)(2) 27.53(g) 27.53(h) 2.1055 22.355 2.1055 24.235 27.54 2.1053 22.917(a) 24.238(a) 27.53(c)(2) 27.53(f) 27.53(g) 27.53(h)
(Band 26) Conducted Spurious Emission
(Band 2) (Band 4) (Band 5)
(Band 12) (Band 13)
(Band 26)
< 43+10log10(P[Watts]) PASS 1 Frequency Stability Temperature & Voltage
< 2.5 ppm for Part 22 Within Authorized Band PASS 1 Radiated Spurious Emission
(Band 2) (Band 4) (Band 5)
(Band 12) (Band 13)
(Band 26)
< 43+10log10(P[Watts]) PASS Under limit 25.15 dB at 1555.000 MHz 3.4 3.5 3.6 3.7 3.8 3.9 4.4 Remark 1: The conducted test items were leverage from module RF report which can refer to Report No. SZEM180400321702. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 4 of 20 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B 1 General Description 1.1 Applicant PAX Technology Limited Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong 1.2 Product Feature of Equipment Under Test Equipment Brand Name Model Name FCC ID EUT supports Radios application IMEI Code HW Version SW Version EUT Stage Product Feature Mobile Payment Terminal PAX D190 V5PD190LTE GSM/LTE/NFC WLAN 2.4GHz 802.11b/g/n HT20 WLAN 5GHz 802.11a/n HT20/HT40 WLAN 5GHz 802.11ac VHT20/VHT40/VHT80 Bluetooth BR / EDR / LE Radiation: 868197030033828 D190-xxx-xxx-xxxx V0.0.0.1 Production Unit Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 5 of 20 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B 1.3 Product Specification of Equipment Under Test Standards-related Product Specification LTE Band 2 : 1850.7 MHz ~ 1909.3 MHz LTE Band 4 : 1710.7 MHz ~ 1754.3 MHz LTE Band 5 : 824.7 MHz ~ 848.3 MHz LTE Band 12 : 699.7 MHz ~ 715.3 MHz LTE Band 13 : 779.5 MHz ~ 784.5 MHz LTE Band 26 : 824.7MHz ~ 848.3 MHz LTE Band 2 : 1930.7 MHz ~ 1989.3 MHz LTE Band 4 : 2110.7 MHz ~ 2154.3 MHz LTE Band 5 : 869.7 MHz ~ 893.3 MHz LTE Band 12 : 729.7 MHz ~ 745.3 MHz LTE Band 13 : 748.5 MHz ~ 753.5 MHz LTE Band 26 : 869.7MHz ~ 893.3MHz LTE Band 2 : 1.4MHz / 3MHz / 5MHz / 10MHz / 15MHz / 20MHz LTE Band 4 : 1.4MHz / 3MHz / 5MHz / 10MHz / 15MHz / 20MHz LTE Band 5 : 1.4MHz / 3MHz / 5MHz / 10MHz LTE Band 12 : 1.4MHz / 3MHz / 5MHz / 10MHz LTE Band 13 : 5MHz / 10MHz LTE Band 26 : 1.4MHz / 3MHz / 5MHz / 10MHz / 15MHz LTE Band 2 : 22.78 dBm LTE Band 4 : 22.60 dBm LTE Band 5 : 22.96 dBm LTE Band 12 : 22.51 dBm LTE Band 13 : 22.86 dBm LTE Band 26 : 22.79 dBm LTE Band 2 : 1.00 dBi LTE Band 4 : 1.00 dBi LTE Band 5 : 0.80 dBi LTE Band 12 : 0.80 dBi LTE Band 13 : 0.80 dBi LTE Band 26 : 0.80 dBi QPSK / 16QAM Tx Frequency Rx Frequency Bandwidth Maximum Output Power to Antenna Antenna Gain Type of Modulation 1.4 Modification of EUT No modifications are made to the EUT during all test items. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 6 of 20 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B 1.5 Maximum ERP/EIRP Power, Frequency Tolerance, and Emission Designator LTE Band 2 QPSK 16QAM BW
(MHz) Frequency Range
(MHz) Emission Designator
(99%OBW) Frequency Tolerance
(ppm) Maximum EIRP(W) Emission Designator
(99%OBW) Frequency Tolerance
(ppm) Maximum EIRP(W) 1.4 1850.7 ~ 1909.3 3 5 10 15 20 1851.5 ~ 1908.5 1852.5 ~ 1907.5 1855.0 ~ 1905.0 1857.5 ~ 1902.5 1860.0 ~ 1900.0
-
-
-
-
-
-
-
-
-
-
-
-
0.2259 0.2280 0.2301 0.2333 0.2366 0.2388
-
-
-
-
-
-
-
-
-
-
-
-
0.2244 0.2218 0.2291 0.2312 0.2360 0.2366 LTE Band 4 QPSK 16QAM BW
(MHz) Frequency Range
(MHz) Emission Designator
(99%OBW) Frequency Tolerance
(ppm) Maximum EIRP(W) Emission Designator
(99%OBW) Frequency Tolerance
(ppm) Maximum EIRP(W) 1.4 1710.7 ~ 1754.3 3 5 10 15 20 1711.5 ~ 1753.5 1712.5 ~ 1752.5 1715.0 ~ 1750.0 1717.5 ~ 1747.5 1720.0 ~ 1745.0
-
-
-
-
-
-
-
-
-
-
-
-
0.2118 0.2118 0.2123 0.2143 0.2203 0.2291
-
-
-
-
-
-
-
-
-
-
-
-
0.2198 0.2198 0.2193 0.2153 0.2198 0.2286 LTE Band 5 QPSK 16QAM BW
(MHz) Frequency Range
(MHz) Emission Designator
(99%OBW) Frequency Tolerance
(ppm) Maximum ERP(W) Emission Designator
(99%OBW) Frequency Tolerance
(ppm) Maximum ERP(W) 1.4 824.7 ~ 848.3 3 5 825.5 ~ 847.5 826.5 ~ 846.5 10 829.0 ~ 844.0
-
-
-
-
-
-
-
-
0.1334 0.1330 0.1288 0.1321
-
-
-
-
-
-
-
-
0.1368 0.1361 0.1361 0.1365 LTE Band 12 QPSK 16QAM BW
(MHz) Frequency Range
(MHz) Emission Designator
(99%OBW) Frequency Tolerance
(ppm) Maximum ERP(W) Emission Designator
(99%OBW) Frequency Tolerance
(ppm) Maximum ERP(W) 1.4 699.7 ~ 715.3 700.5 ~ 714.5 701.5 ~ 713.5 704.0 ~ 711.0 3 5 10
-
-
-
-
Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE
-
-
-
-
0.1262 0.1245 0.1259 0.1306
-
-
-
-
-
-
-
-
0.1282 0.1259 0.1271 0.1303 Page Number
: 7 of 20 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B LTE Band 13 QPSK 16QAM BW
(MHz) 5 10 Frequency Range
(MHz) Emission Designator
(99%OBW) Frequency Tolerance
(ppm) Maximum ERP(W) Emission Designator
(99%OBW) Frequency Tolerance
(ppm) Maximum ERP(W) 779.5 ~ 784.5 782.0
-
-
LTE Band 26
-
-
QPSK 0.1337 0.1416
-
-
-
-
16QAM 0.1413 0.1396 BW
(MHz) Frequency Range
(MHz) Emission Designator
(99%OBW) Frequency Tolerance
(ppm) Maximum EIRP(W) Emission Designator
(99%OBW) Frequency Tolerance
(ppm) Maximum EIRP(W) 1.4 824.7 ~ 848.3 825.5 ~ 847.5 826.5 ~ 846.5 829.0 ~ 844.0 831.5 ~ 841.5 3 5 10 15
-
-
-
-
-
-
-
-
-
-
0.1334 0.1330 0.1288 0.1321 0.1393
-
-
-
-
-
-
-
-
-
-
0.1368 0.1361 0.1361 0.1365 0.1390 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 8 of 20 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B 1.6 Testing Location Sporton International (Shenzhen) Inc. is accredited to ISO/IEC 17025:2017 by American Association for Laboratory Accreditation with Certificate Number 5145.01. Test Firm Sporton International (Shenzhen) Inc. Test Site Location No. 3 Bldg the third floor of south, Shahe River west, Fengzeyuan Warehouse, Nanshan Shenzhen, 518055 Peoples Republic of China TEL: +86-755-33202398 Test Site No. Sporton Site No. FCC Designation No. FCC Test Firm Registration No. 03CH01-SZ CN1256 421272 1.7 Applicable Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards:
47 CFR Part 2, 22(H), 24(E), 27(L), 27(F), 27(H) ANSI C63.26-2015 FCC KDB 971168 D01 Power Meas License Digital Systems v03r01 FCC KDB 412172 D01 Determining ERP and EIRP v01r01 Remark:
1. All test items were verified and recorded according to the standards and without any deviation during the test. 2. This EUT has also been tested and complied with the requirements of FCC Part 15, Subpart B, recorded in a separate test report. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 9 of 20 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B 2 Test Configuration of Equipment Under Test 2.1 Test Mode Antenna port conducted and radiated test items listed below are performed according to KDB 971168 D01 Power Meas License Digital Systems v03r01 with maximum output power. Radiated measurements are performed by rotating the EUT in three different orthogonal test planes to find the maximum emission. Bandwidth (MHz) Modulation RB #
Test Channel Test Items Band 1.4 3 v v v v
-
v v v v
-
v v v v
-
v 5 v v v v v v v v v v v v v v v v 10 15 20 QPSK 16QAM 64QA M v v v v v v v v v v v v v v v v v v
-
-
-
v v v
-
-
v v v
-
-
v v v
-
-
-
-
v v
-
-
-
v v
-
-
-
v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1 v v v v v v v v v v v v v v v v Half Full L M H v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v 2 4 5 12 13 26 2 4 12 13 26 2 4 12 13 26 v v v v
-
v v v v
-
v v v v
-
v 1. The mark v means that this configuration is chosen for testing 2. The mark - means that this bandwidth is not supported. 3. The device is investigated from 30MHz to 10 times of fundamental signal for radiated spurious emission test under different RB size/offset and modulations in exploratory test. Subsequently, only the worst case emissions are reported. 4. LTE Band 26 overlaps the entire frequency range of LTE Band 5. Therefore, the test results provided in this report Max. Output Power E.R.P /
E.I.R.P Radiated Spurious Emission Note covers Band 5 and the portion of Band 26 subject to Part 22. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 10 of 20 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B 2.2 Connection Diagram of Test System System Simulator Power Source EUT This example is connection diagram of EUT test configurations.
. For detail, please refer to test mode configuration and setup photographs for each test item. 2.3 Support Unit used in test configuration and system Item Equipment Trade Name Model No. FCC ID Data Cable Power Cord 1. LTE Base Station Anritsu CMW500 Fcc DoC N/A Shielded, 1.5m Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 11 of 20 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B 2.4 Frequency List of Low/Middle/High Channels BW [MHz]
Channel/Frequency(MHz) Lowest Middle Highest LTE Band 2 Channel and Frequency List 20 15 10 5 3 1.4 Channel Frequency Channel Frequency Channel Frequency Channel Frequency Channel Frequency Channel Frequency 18700 1860 18675 1857.5 18650 1855 18625 1852.5 18615 1851.5 18607 1850.7 18900 1880 18900 1880 18900 1880 18900 1880 18900 1880 18900 1880 19100 1900 19125 1902.5 19150 1905 19175 1907.5 19185 1908.5 19193 1909.3 BW [MHz]
Channel/Frequency(MHz) Lowest Middle Highest LTE Band 4 Channel and Frequency List 20 15 10 5 3 1.4 Channel Frequency Channel Frequency Channel Frequency Channel Frequency Channel Frequency Channel Frequency 20050 1720 20025 1717.5 20000 1715 19975 1712.5 19965 1711.5 19957 1710.7 20175 1732.5 20175 1732.5 20175 1732.5 20175 1732.5 20175 1732.5 20175 1732.5 20300 1745 20325 1747.5 20350 1750 20375 1752.5 20385 1753.5 20393 1754.3 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 12 of 20 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B BW [MHz]
Channel/Frequency(MHz) Lowest Middle Highest LTE Band 5 Channel and Frequency List 10 5 3 1.4 Channel Frequency Channel Frequency Channel Frequency Channel Frequency 20450 829 20425 826.5 20415 825.5 20407 824.7 20525 836.5 20525 836.5 20525 836.5 20525 836.5 20600 844 20625 846.5 20635 847.5 20643 848.3 BW [MHz]
Channel/Frequency(MHz) Lowest Middle Highest LTE Band 12 Channel and Frequency List 10 5 3 1.4 Channel Frequency Channel Frequency Channel Frequency Channel Frequency 23060 704 23035 701.5 23025 700.5 23017 699.7 23095 707.5 23095 707.5 23095 707.5 23095 707.5 LTE Band 13 Channel and Frequency List BW [MHz]
Channel/Frequency(MHz) Lowest 10 5 Channel Frequency Channel Frequency
-
-
23205 779.5 Middle 23230 782 23230 782 23130 711 23155 713.5 23165 714.5 23173 715.3 Highest
-
-
23255 784.5 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 13 of 20 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B BW [MHz]
Channel/Frequency(MHz) Lowest Middle Highest LTE Band 26 Channel and Frequency List 15 10 5 3 1.4 Channel Frequency Channel Frequency Channel Frequency Channel Frequency Channel Frequency 26865 831.5 26840 829 26815 826.5 26805 825.5 26797 824.7 26915 836.5 26915 836.5 26915 836.5 26915 836.5 26915 836.5 26965 841.5 26990 844 27015 846.5 27025 847.5 27033 848.3 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 14 of 20 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B 3 Conducted Test Items 3.1 Measuring Instruments See list of measuring instruments of this test report. 3.2 Test Setup 3.2.1 Conducted Output Power 3.3 Test Result of Conducted Test Please refer to Appendix A. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 15 of 20 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B 3.4 Conducted Output Power and ERP/EIRP 3.4.1 Description of the Conducted Output Power Measurement and ERP/EIRP Measurement A system simulator was used to establish communication with the EUT. Its parameters were set to force the EUT transmitting at maximum output power. The measured power in the radio frequency on the transmitter output terminals shall be reported. The ERP of mobile transmitters must not exceed 7 Watts for LTE Band 5 and Band 26. The ERP of mobile transmitters must not exceed 3 Watts for LTE Band 12, Band 13. The EIRP of mobile transmitters must not exceed 2 Watts for LTE Band 2 The EIRP of mobile transmitters must not exceed 1 Watts for LTE Band 4. According to KDB 412172 D01 Power Approach, EIRP = PT + GT LC, ERP = EIRP -2.15, where PT = transmitter output power in dBm GT = gain of the transmitting antenna in dBi LC = signal attenuation in the connecting cable between the transmitter and antenna in dB 3.4.2 Test Procedures 1. 2. The testing follows ANSI C63.26 Section 5.2 The transmitter output port was connected to the system simulator. 3. Set EUT at maximum power through the system simulator. 4. Select lowest, middle, and highest channels for each band and different modulation. 5. Measure and record the power level from the system simulator. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 16 of 20 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B 4 Radiated Test Items 4.1 Measuring Instruments See list of measuring instruments of this test report. 4.2 Test Setup 4.2.1 For radiated test from 30MHz to 1GHz 4.2.2 For radiated test above 1GHz 4.3 Test Result of Radiated Test Please refer to Appendix B. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 17 of 20 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B 4.4 Radiated Spurious Emission 4.4.1 Description of Radiated Spurious Emission The radiated spurious emission was measured by substitution method according to ANSI C63.26. The power of any emission outside of the authorized operating frequency ranges must be attenuated below the transmitter power (P) by a factor of at least 43 + 10 log (P) dB. For LTE Band 13 For operations in the 746-758 MHz, 775-788 MHz, and 805-806 MHz bands, emissions in the band 1559-1610 MHz shall be limited to 70 dBW/MHz equivalent isotropically radiated power (EIRP) for wideband signals, and 80 dBW EIRP for discrete emissions of less than 700 Hz bandwidth. The spectrum is scanned from 30 MHz up to a frequency including its 10th harmonic. 4.4.2 Test Procedures 1. 2. 3. 4. 5. The testing follows ANSI C63.26 Section 5.5 The EUT was placed on a turntable with 0.8 meter height for frequency below 1GHz and 1.5 meter height for frequency above 1GHz respectively above ground. The EUT was set 3 meters from the receiving antenna mounted on the antenna tower. The table was rotated 360 degrees to determine the position of the highest spurious emission. The height of the receiving antenna is varied between 1m to 4m to search the maximum spurious emission for both horizontal and vertical polarizations. 6. During the measurement, the system simulator parameters were set to force the EUT transmitting at maximum output power. 7. Make the measurement with the spectrum analyzer's RBW = 1MHz, VBW = 3MHz, taking the record of maximum spurious emission. 8. A horn antenna was substituted in place of the EUT and was driven by a signal generator. 9. Tune the output power of signal generator to the same emission level with EUT maximum spurious emission. 10. EIRP (dBm) = S.G. Power Tx Cable Loss + Tx Antenna Gain 11. ERP (dBm) = EIRP - 2.15 12. The RF fundamental frequency should be excluded against the limit line in the operating frequency band. The limit line is derived from 43 + 10log(P)dB below the transmitter power P(Watts)
= P(W)- [43 + 10log(P)] (dB)
= [30 + 10log(P)] (dBm) - [43 + 10log(P)] (dB)
= -13dBm. 13. For Band 7, 38, 41:
The limit line is derived from 55 + 10log(P)dB below the transmitter power P(Watts) Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 18 of 20 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B 5 List of Measuring Equipment Instrument Manufacturer Model No. Serial No. Characteristics Calibration Date Test Date Due Date Remark EMI Test Receiver&SA Agilent N9038A MY52260185 20Hz~26.5GHz Aug. 30, 2018 Jun. 25, 2019 Aug. 29, 2019 HF Amplifier KEYSIGHT 83017A MY53270104 0.5GHz~26.5Ghz Dec. 22, 2018 Jun. 25, 2019 Dec. 21, 2019 Bilog Antenna TeseQ CBL6112D 35407 30MHz-2GHz Jun. 05, 2019 Jun. 25, 2019 Jun. 04, 2020 Double Ridge Horn Antenna ETS Lindgren 3117 119436 1GHz~18GHz Jun. 28, 2018 Jun. 25, 2019 Jun. 27, 2019 SHF-EHF Horn com-power AH-840 101071 18Ghz-40GHz Mar. 30, 2019 Jun. 25, 2019 Mar. 29, 2020 LF Amplifier Burgeon BPA-530 102209 0.01~3000Mhz Apr. 19, 2019 Jun. 25, 2019 Apr. 18, 2020 HF Amplifier MITEQ HF Amplifier MITEQ AMF-7D-00 101800-30-1 0P-R TTA1840-35
-HG 1707137 1GHz~18GHz Oct. 19, 2018 Jun. 25, 2019 Oct. 18, 2019 1871923 18GHz~40GHz Jul. 17, 2018 Jun. 25, 2019 Jul. 16, 2019 AC Power Source Chroma 61601 616010001985 N/A NCR Jun. 25, 2019 NCR Turn Table EM EM1000 N/A 0~360 degree NCR Jun. 25, 2019 NCR Radiation
(03CH01-SZ) Radiation
(03CH01-SZ) Radiation
(03CH01-SZ) Radiation
(03CH01-SZ) Radiation
(03CH01-SZ) Radiation
(03CH01-SZ) Radiation
(03CH01-SZ) Radiation
(03CH01-SZ) Radiation
(03CH01-SZ) Radiation
(03CH01-SZ) NCR: No Calibration Required Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 19 of 20 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B 6 Uncertainty of Evaluation The measurement uncertainties shown below were calculated in accordance with the requirements of ANSI 63.26-2015. All the measurement uncertainty value were shown with a coverage K=2 to indicate 95% level of confidence. The measurement data show herein meets or exceeds the CISPR measurement uncertainty values specified in CISPR 16-4-2 and can be compared directly to specified limit to determine compliance. Uncertainty of Radiated Emission Measurement (30 MHz ~ 1000 MHz) Measuring Uncertainty for a Level of Confidence of 95% (U = 2Uc(y)) Uncertainty of Radiated Emission Measurement (1 GHz ~ 18 GHz) Measuring Uncertainty for a Level of Confidence of 95% (U = 2Uc(y)) Uncertainty of Radiated Emission Measurement (18 GHz ~ 40 GHz) Measuring Uncertainty for a Level of Confidence of 95% (U = 2Uc(y)) 2.5dB 3.5dB 4.0dB Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 20 of 20 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B Appendix A. Test Results of Conducted Test Conducted Output Power(Average power) LTE Band 2 Maximum Average Power [dBm]
Index BW [MHz]
Mod RB Size RB Offset Lowest Middle Highest L M H 20 20 20 20 20 20 20 20 20 20 15 15 15 15 15 15 15 15 15 15 QPSK 16-QAM QPSK 16-QAM 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 15 15 15 15 15 15 15 15 15 15 11 11 11 11 11 11 11 11 11 11 22.36 22.45 22.59 22.45 22.41 22.64 22.58 22.59 22.44 22.47 22.54 22.46 22.48 22.44 22.41 22.71 22.49 22.73 22.45 22.52 22.37 22.34 22.44 22.28 22.27 22.36 22.27 22.33 22.41 22.26 22.25 22.23 22.24 22.25 22.23 22.45 22.23 22.28 22.21 22.41 22.78 22.66 22.71 22.48 22.42 22.67 22.56 22.74 22.64 22.54 22.74 22.66 22.54 22.64 22.49 22.71 22.69 22.61 22.64 22.71 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: A1 of A22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B LTE Band 2 Maximum Average Power [dBm]
Index BW [MHz]
Mod RB Size RB Offset Lowest Middle Highest L M H 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 QPSK 16-QAM QPSK 16-QAM 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 7 7 7 7 7 7 7 7 7 7 3 3 3 3 3 3 3 3 3 3 22.51 22.50 22.48 22.56 21.98 22.54 22.64 22.51 22.43 21.48 22.50 22.45 22.43 22.53 21.88 22.44 22.60 22.50 22.39 21.42 22.35 22.30 22.38 22.31 21.73 22.47 22.41 22.16 22.21 21.29 22.32 22.30 22.31 22.29 21.70 22.42 22.39 22.11 22.21 21.23 22.61 22.54 22.54 22.68 21.99 22.56 22.41 22.56 22.45 21.42 22.61 22.51 22.44 22.62 21.92 22.51 22.33 22.50 22.43 21.40 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: A2 of A22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B LTE Band 2 Maximum Average Power [dBm]
Index BW [MHz]
Mod RB Size RB Offset Lowest Middle Highest L M H 3 3 3 3 3 3 3 3 3 3 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 QPSK 16-QAM QPSK 16-QAM 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 22.38 22.41 22.37 22.28 21.69 22.33 22.30 22.37 22.26 21.34 22.46 22.44 22.40 22.27 21.69 22.30 22.32 22.41 22.31 21.32 22.25 22.29 22.28 22.30 21.60 22.38 22.29 22.12 22.16 21.23 22.29 22.20 22.32 22.24 21.61 22.34 22.38 22.10 22.20 21.22 22.58 22.42 22.42 22.57 21.83 22.46 22.27 22.41 22.34 21.34 22.54 22.44 22.38 22.53 21.86 22.51 22.32 22.51 22.40 21.32 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: A3 of A22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B LTE Band 4 Maximum Average Power [dBm]
Index BW [MHz]
Mod RB Size RB Offset Lowest Middle Highest L M H 20 20 20 20 20 20 20 20 20 20 15 15 15 15 15 15 15 15 15 15 QPSK 16-QAM QPSK 16-QAM 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 15 15 15 15 15 15 15 15 15 15 11 11 11 11 11 11 11 11 11 11 22.41 22.19 22.26 22.23 22.17 22.41 22.32 22.34 22.27 22.47 22.23 22.15 22.17 22.13 22.10 22.40 22.18 22.42 22.14 22.21 22.60 22.29 22.31 22.24 22.33 22.48 22.59 22.31 22.44 22.31 21.94 21.92 21.93 21.94 21.92 22.14 21.92 21.97 21.90 22.10 22.31 22.12 22.21 22.23 22.31 22.19 22.24 22.11 22.21 22.31 22.43 22.35 22.23 22.33 22.18 22.40 22.38 22.30 22.33 22.40 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: A4 of A22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B LTE Band 4 Maximum Average Power [dBm]
Index BW [MHz]
Mod RB Size RB Offset Lowest Middle Highest L M H 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 QPSK 16-QAM QPSK 16-QAM 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 7 7 7 7 7 7 7 7 7 7 3 3 3 3 3 3 3 3 3 3 21.96 22.08 22.02 22.11 21.41 22.24 22.17 22.04 22.15 21.06 22.08 22.02 21.45 21.43 21.34 22.17 22.14 21.54 21.51 21.00 22.00 22.08 22.01 22.19 21.46 22.33 22.29 22.08 22.19 21.03 22.11 22.07 21.64 21.49 21.41 22.31 22.28 21.54 21.57 20.96 22.31 22.23 22.22 22.27 21.74 22.21 22.31 22.15 22.31 21.08 22.27 22.25 21.66 21.71 21.68 22.47 22.41 21.69 21.70 21.15 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: A5 of A22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B LTE Band 4 Maximum Average Power [dBm]
Index BW [MHz]
Mod RB Size RB Offset Lowest Middle Highest L M H 3 3 3 3 3 3 3 3 3 3 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 QPSK 16-QAM QPSK 16-QAM 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 22.05 21.97 21.40 21.40 21.30 22.15 22.09 21.48 21.41 21.01 22.02 21.99 21.43 21.37 21.33 22.13 22.05 21.50 21.50 20.96 22.09 22.02 21.63 21.39 21.39 22.23 22.21 21.55 21.49 20.91 22.11 22.03 21.60 21.44 21.42 22.31 22.26 21.55 21.51 20.93 22.26 22.23 21.59 21.64 21.63 22.42 22.41 21.65 21.61 21.07 22.21 22.26 21.60 21.64 21.61 22.42 22.36 21.65 21.67 21.14 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: A6 of A22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B LTE Band 5 Maximum Average Power [dBm]
Index BW [MHz]
Mod RB Size RB Offset Lowest Middle Highest L M H 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 QPSK 16-QAM QPSK 16-QAM 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 7 7 7 7 7 7 7 7 7 7 3 3 3 3 3 3 3 3 3 3 22.65 22.75 22.62 22.57 22.08 22.87 22.88 22.70 22.65 21.69 22.73 22.77 22.24 22.21 22.09 22.83 22.86 22.16 22.09 21.60 22.55 22.59 22.55 22.59 21.88 22.75 22.83 22.55 22.63 21.54 22.66 22.61 22.08 22.01 22.00 22.78 22.88 22.06 22.12 21.64 22.77 22.96 22.76 22.73 22.12 22.95 22.90 22.80 22.62 21.66 22.76 22.67 22.21 22.19 22.11 22.89 22.92 22.12 22.21 21.70 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: A7 of A22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B LTE Band 5 Maximum Average Power [dBm]
Index BW [MHz]
Mod RB Size RB Offset Lowest Middle Highest L M H 3 3 3 3 3 3 3 3 3 3 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 QPSK 16-QAM QPSK 16-QAM 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 22.62 22.74 22.63 22.48 21.99 22.77 22.89 22.64 22.60 21.59 22.58 22.69 22.58 22.49 22.04 22.81 22.84 22.71 22.60 21.65 22.56 22.52 22.46 22.51 21.78 22.67 22.75 22.45 22.64 21.55 22.45 22.56 22.45 22.51 21.79 22.68 22.83 22.51 22.61 21.50 22.73 22.81 22.75 22.68 22.08 22.92 22.81 22.77 22.62 21.66 22.67 22.83 22.66 22.68 22.11 22.86 22.91 22.74 22.52 21.56 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: A8 of A22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B LTE Band 12 Maximum Average Power [dBm]
Index BW [MHz]
Mod RB Size RB Offset Lowest Middle Highest L M H 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 QPSK 16-QAM QPSK 16-QAM 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 7 7 7 7 7 7 7 7 7 7 3 3 3 3 3 3 3 3 3 3 22.31 22.51 22.41 22.25 21.75 22.29 22.32 22.34 22.37 21.40 22.23 22.23 22.29 22.14 21.68 22.22 22.24 22.32 22.31 21.32 22.30 22.32 22.38 22.24 21.56 22.27 22.37 22.25 22.50 21,42 22.28 22.35 21.79 21.64 21.82 22.29 22.35 21.77 21.92 21.33 22.16 22.28 22.28 22.23 21.50 22.22 22.32 22.27 22.21 21.19 22.15 22.09 21.59 21.56 21.61 22.35 22.39 21.65 21.56 21.11 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: A9 of A22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B LTE Band 12 Maximum Average Power [dBm]
Index BW [MHz]
Mod RB Size RB Offset Lowest Middle Highest L M H 3 3 3 3 3 3 3 3 3 3 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 QPSK 16-QAM QPSK 16-QAM 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 22.19 22.28 22.25 22.15 21.70 22.23 22.22 22.33 22.37 21.39 22.19 22.22 22.29 22.23 21.73 22.28 22.33 22.31 22.38 21.39 22.23 22.16 22.30 22.24 21.46 22.24 22.35 22.23 22.44 22.43 22.29 22.20 22.36 22.21 21.52 22.22 22.33 22.21 22.43 22.37 22.17 22.19 22.19 22.22 21.44 22.19 22.31 22.22 22.13 21.14 22.13 22.14 22.23 22.23 21.44 22.20 22.22 22.27 22.11 21.17 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: A10 of A22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B LTE Band 13 Maximum Average Power [dBm]
Index BW [MHz]
Mod RB Size RB Offset Lowest Middle Highest L M H 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 QPSK 16-QAM QPSK 16-QAM 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 7 7 7 7 7 7 7 7 7 7 3 3 3 3 3 3 3 3 3 3
-
22.61 22.57 22,06 22.00 21.93 22.68 22.79 22.00 22.13 21.47 22.56 22.86 22.54 22.70 22.03 22.80 22.78 22.65 22.59 21.35 22.49 22.54 22.05 22.02 21.91 22.75 22.80 22.03 21.95 21.33
-
22.56 22.45 22.09 22.04 22.03 22.85 22.73 22.01 22.02 21.51 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: A11 of A22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B LTE Band 26 Maximum Average Power [dBm]
Index BW [MHz]
Mod RB Size RB Offset Lowest Middle Highest L M H 15 15 15 15 15 15 15 15 15 15 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 QPSK 16-QAM QPSK 16-QAM QPSK 16-QAM 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 11 11 11 11 11 11 11 11 11 11 7 7 7 7 7 7 7 7 7 7 3 3 3 3 3 3 3 3 3 3 22.79 22.48 22.71 22.55 22.50 22.78 22.69 22.56 22.37 22.58 22.40 22.41 22.32 22.42 21.76 22.66 22.59 22.40 22.35 21.27 22.45 22.38 22.57 22.38 22.41 22.63 22.53 22.49 22.45 22.44 22.52 22.37 22.69 22.54 22.49 22.77 22.68 22.55 22.36 22.57 22.49 22.39 22.56 22.48 21.89 22.59 22.70 22.40 22.52 21.24 22.42 22.39 21.83 21.88 21.76 22.61 22.69 21.81 21.79 21.62 22.39 22.36 22.42 22.33 22.31 22.56 22.55 22.30 22.28 22.42 22.20 22.15 22.35 22.22 21.78 22.67 22.61 22.42 22.33 21.33 22.35 22.23 21.74 21.72 21.71 22.66 22.62 21.73 21.71 21.30 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: A12 of A22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B LTE Band 26 Maximum Average Power [dBm]
Index BW [MHz]
Mod RB Size RB Offset Lowest Middle Highest L M H 3 3 3 3 3 3 3 3 3 3 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 QPSK 16-QAM QPSK 16-QAM 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 22.38 22.40 22.56 22.36 22.40 22.57 22.60 22.40 22.46 22.55 22.43 22.42 22.55 22.38 22.41 22.61 22.60 22.45 22.40 22.52 22.47 22.33 22.59 22.46 22.46 22.69 22.66 22.52 22.26 22.57 22.46 22.33 22.60 22.52 22.39 22.71 22.67 22.55 22.34 22.48 22.33 22.36 22.36 22.28 22.28 22.52 22.53 22.31 22.25 22.43 22.31 22.36 22.43 22.23 22.27 22.57 22.50 22.23 22.26 22.43 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: A13 of A22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B ERP/EIRP Bandwidth 1.4M 3M 5M LTE Band 2 (GT - LC = 1.00 dB) QPSK Channel Frequency
(MHz) Conducted Power (dBm) Conducted Power (Watts) 18607 18900 19193 18615 18900 19185 18625 18900 19175
(Low)
(Mid)
(High)
(Low)
(Mid)
(High)
(Low)
(Mid)
(High) 1850.7 1880 1909.3 1851.5 1880 1908.5 1852.5 1880 1907.5 22.46 22.29 22.54 22.38 22.25 22.58 22.53 22.29 22.62 0.1762 0.1694 0.1795 0.1730 0.1679 0.1811 0.1791 0.1694 0.1828 EIRP(dBm) 23.46 23.29 23.54 23.38 23.25 23.58 23.53 23.29 23.62 EIRP(Watts) 0.2218 0.2133 0.2259 0.2178 0.2113 0.2280 0.2254 0.2133 0.2301 Bandwidth 10M 15M 20M LTE Band 2 (GT - LC = 1.00 dB) QPSK Channel Frequency
(MHz) Conducted Power (dBm) Conducted Power
(Watts) 18650 18900 19150 18675 18900 19125 18650 18900 19100
(Low)
(Mid)
(High)
(Low)
(Mid)
(High)
(Low)
(Mid)
(High) 1855 1880 1905 1857.5 1880 1902.5 1860 1880 1900 22.56 22.31 22.68 22.54 22.25 22.74 22.36 22.37 22.78 0.1803 0.1702 0.1854 0.1795 0.1679 0.1879 0.1722 0.1726 0.1897 EIRP(dBm) 23.56 23.31 23.68 23.54 23.25 23.74 23.36 23.37 23.78 EIRP(Watts) 0.2270 0.2143 0.2333 0.2259 0.2113 0.2366 0.2168 0.2173 0.2388 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: A14 of A22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B Bandwidth 1.4M 3M 5M LTE Band 2 (GT - LC = 1.00 dB) 16QAM Channel Frequency
(MHz) Conducted Power (dBm) Conducted Power
(Watts) 18607 18900 19193 18615 18900 19185 18625 18900 19175
(Low)
(Mid)
(High)
(Low)
(Mid)
(High)
(Low)
(Mid)
(High) 1850.7 1880 1909.3 1851.5 1880 1908.5 1852.5 1880 1907.5 22.30 22.34 22.51 22.33 22.38 22.46 22.60 22.39 22.33 0.1698 0.1714 0.1782 0.1710 0.1730 0.1762 0.1820 0.1734 0.1710 EIRP(dBm) 23.30 23.34 23.51 23.33 23.38 23.46 23.60 23.39 23.33 EIRP(Watts) 0.2138 0.2158 0.2244 0.2153 0.2178 0.2218 0.2291 0.2183 0.2153 Bandwidth 10M 15M 20M LTE Band 2 (GT - LC = 1.00 dB) 16QAM Channel Frequency
(MHz) Conducted Power (dBm) Conducted Power
(Watts) 18650 18900 19150 18675 18900 19125 18650 18900 19100
(Low)
(Mid)
(High)
(Low)
(Mid)
(High)
(Low)
(Mid)
(High) 1855 1880 1905 1857.5 1880 1902.5 1860 1880 1900 22.64 22.41 22.41 22.73 22.28 22.61 22.59 22.33 22.74 0.1837 0.1742 0.1742 0.1875 0.1690 0.1824 0.1816 0.1710 0.1879 EIRP(dBm) 23.64 23.41 23.41 23.73 23.28 23.61 23.59 23.33 23.74 EIRP(Watts) 0.2312 0.2193 0.2193 0.2360 0.2128 0.2296 0.2286 0.2153 0.2366 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: A15 of A22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B Bandwidth 1.4M 3M 5M LTE Band 4 (GT - LC = 1.00 dB) QPSK Channel Frequency
(MHz) Conducted Power (dBm) Conducted Power
(Watts) 19957 20175 20393 19965 20175 20385 19975 20175 20375
(Low)
(Mid)
(High)
(Low)
(Mid)
(High)
(Low)
(Mid)
(High) 1710.7 1732.5 1754.3 1711.5 1732.5 1753.5 1712.5 1732.5 1752.5 21.99 22.03 22.26 22.05 22.09 22.26 22.08 22.11 22.27 0.1581 0.1596 0.1683 0.1603 0.1618 0.1683 0.1614 0.1626 0.1687 EIRP(dBm) 22.99 23.03 23.26 23.05 23.09 23.26 23.08 23.11 23.27 EIRP(Watts) 0.1991 0.2009 0.2118 0.2018 0.2037 0.2118 0.2032 0.2046 0.2123 Bandwidth 10M 15M 20M LTE Band 4 (GT - LC = 1.00 dB) QPSK Channel Frequency
(MHz) Conducted Power (dBm) Conducted Power
(Watts) 20000 20175 20350 20025 20175 20325 20050 20175 20300
(Low)
(Mid)
(High)
(Low)
(Mid)
(High)
(Low)
(Mid)
(High) 1715 1732.5 1750 1717.5 1732.5 1747.5 1720 1732.5 1745 21.96 22.00 22.31 22.23 21.94 22.43 22.41 22.60 22.31 0.1570 0.1585 0.1702 0.1671 0.1563 0.1750 0.1742 0.1820 0.1702 EIRP(dBm) 22.96 23.00 23.31 23.23 22.94 23.43 23.41 23.60 23.31 EIRP(Watts) 0.1977 0.1995 0.2143 0.2104 0.1968 0.2203 0.2193 0.2291 0.2143 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: A16 of A22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B Bandwidth 1.4M 3M 5M LTE Band 4 (GT - LC = 1.00 dB) 16QAM Channel Frequency
(MHz) Conducted Power (dBm) Conducted Power
(Watts) 19957 20175 20393 19965 20175 20385 19975 20175 20375
(Low)
(Mid)
(High)
(Low)
(Mid)
(High)
(Low)
(Mid)
(High) 1710.7 1732.5 1754.3 1711.5 1732.5 1753.5 1712.5 1732.5 1752.5 22.13 22.31 22.42 22.15 22.23 22.42 22.14 22.28 22.41 0.1633 0.1702 0.1746 0.1641 0.1671 0.1746 0.1637 0.1690 0.1742 EIRP(dBm) 23.13 23.31 23.42 23.15 23.23 23.42 23.14 23.28 23.41 EIRP(Watts) 0.2056 0.2143 0.2198 0.2065 0.2104 0.2198 0.2061 0.2128 0.2193 Bandwidth 10M 15M 20M LTE Band 4 (GT - LC = 1.00 dB) 16QAM Channel Frequency
(MHz) Conducted Power (dBm) Conducted Power
(Watts) 20000 20175 20350 20025 20175 20325 20050 20175 20300
(Low)
(Mid)
(High)
(Low)
(Mid)
(High)
(Low)
(Mid)
(High) 1715 1732.5 1750 1717.5 1732.5 1747.5 1720 1732.5 1745 22.24 22.33 22.21 22.42 21.97 22.30 22.32 22.59 22.24 0.1675 0.1710 0.1663 0.1746 0.1574 0.1698 0.1706 0.1816 0.1675 EIRP(dBm) 23.24 23.33 23.21 23.42 22.97 23.30 23.32 23.59 23.24 EIRP(Watts) 0.2109 0.2153 0.2094 0.2198 0.1982 0.2138 0.2148 0.2286 0.2109 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: A17 of A22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B Bandwidth 1.4M 3M 5M LTE Band 12 (GT - LC = 0.80 dB) QPSK Channel Frequency
(MHz) Conducted Power (dBm) Conducted Power (Watts) 23017 23095 23173 23025 23095 23165 23035 23095 23155
(Low)
(Mid)
(High)
(Low)
(Mid)
(High)
(Low)
(Mid)
(High) 699.7 707.5 715.3 700.5 707.5 714.5 701.5 707.5 713.5 22.29 22.36 22.23 22.25 22.30 22.19 22.23 22.35 22.09 0.1694 0.1722 0.1671 0.1679 0.1698 0.1656 0.1671 0.1718 0.1618 ERP(dBm) 20.94 21.01 20.88 20.90 20.95 20.84 20.88 21.00 20.74 ERP(Watts) 0.1242 0.1262 0.1225 0.1230 0.1245 0.1213 0.1225 0.1259 0.1186 Bandwidth Channel Frequency
(MHz) LTE Band 12 (GT - LC = 0.80 dB) QPSK 23060
(Low) 704 10M 23095
(Mid) 707.5 23130
(High) 711 Conducted Power (dBm) 22.51 22.32 22.28 Conducted Power (Watts) ERP(dBm) ERP(Watts) 0.1782 21.16 0.1306 0.1706 20.97 0.1250 0.1690 20.93 0.1239 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: A18 of A22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B Bandwidth 1.4M 3M 5M LTE Band 12 (GT - LC = 0.80 dB) 16QAM Channel Frequency
(MHz) Conducted Power (dBm) Conducted Power
(Watts) 23017 23095 23173 23025 23095 23165 23035 23095 23155
(Low)
(Mid)
(High)
(Low)
(Mid)
(High)
(Low)
(Mid)
(High) 699.7 707.5 715.3 700.5 707.5 714.5 701.5 707.5 713.5 22.38 22.43 22.11 22.22 22.35 22.31 22.24 22.35 22.39 0.1730 0.1750 0.1626 0.1667 0.1718 0.1702 0.1675 0.1718 0.1734 ERP(dBm) 21.03 21.08 20.76 20.87 21.00 20.96 20.89 21.00 21.04 ERP(Watts) 0.1268 0.1282 0.1191 0.1222 0.1259 0.1247 0.1227 0.1259 0.1271 Bandwidth Channel Frequency
(MHz) LTE Band 12 (GT - LC = 0.80 dB) 16QAM 23060
(Low) 704 10M 23095
(Mid) 707.5 23130
(High) 711 Conducted Power (dBm) 22.37 22.50 22.21 Conducted Power (Watts) ERP(dBm) ERP(Watts) 0.1726 21.02 0.1265 0.1778 21.15 0.1303 0.1663 20.86 0.1219 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: A19 of A22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B LTE Band 13 (GT - LC = 0.80 dB) QPSK Bandwidth Channel Frequency
(MHz) Conducted Power (dBm) Conducted Power (Watts) 23205
(Low) 5M 23230
(Mid) 23255
(High) 779.5 782 784.5 22.61 22.49 22.56 0.1824 0.1774 0.1803 ERP(dBm) 21.26 21.14 21.21 ERP(Watts) 0.1337 0.1300 0.1321
-
-
Bandwidth Channel Frequency
(MHz) Conducted Power (dBm) Conducted Power (Watts) LTE Band 13 (GT - LC = 0.80 dB) 16QAM 23205
(Low) 5M 23230
(Mid) 23255
(High) 779.5 782 784.5 22.68 22.75 22.85 0.1854 0.1884 0.1928
-
-
ERP(dBm) 21.33 21.40 21.50 ERP(Watts) 0.1358 0.1380 0.1413 10M 23230
(Mid) 782 22.86 0.1932 21.51 0.1416 10M 23230
(Mid) 782 22.80 0.1905 21.45 0.1396
-
-
-
-
-
-
-
-
-
-
-
-
Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: A20 of A22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B Bandwidth 1.4M 3M 5M LTE Band 26 (GT - LC = 0.80 dB) QPSK Channel Frequency
(MHz) Conducted Power (dBm) Conducted Power
(Watts) 26797 26915 27033 26805 26915 27025 26815 26915 27015
(Low)
(Mid)
(High)
(Low)
(Mid)
(High)
(Low)
(Mid)
(High) 824.7 836.5 848.3 825.5 836.5 847.5 826.5 836.5 846.5 22.55 22.60 22.43 22.56 22.59 22.36 22.45 22.42 22.35 0.1799 0.1820 0.1750 0.1803 0.1816 0.1722 0.1758 0.1746 0.1718 ERP(dBm) 21.20 21.25 21.08 21.21 21.24 21.01 21.10 21.07 21.00 ERP(Watts) 0.1318 0.1334 0.1282 0.1321 0.1330 0.1262 0.1288 0.1279 0.1259 Bandwidth Channel Frequency
(MHz) Conducted Power (dBm) Conducted Power
(Watts) LTE Band 26 (GT - LC = 0.80 dB) QPSK 26840
(Low) 10M 26915
(Mid) 26990
(High) 26865
(Low) 15M 26915
(Mid) 26965
(High) 829 836.5 844 831.5 836.5 841.5 22.32 22.56 22.35 22.79 22.52 22.39 0.1706 0.1803 0.1718 0.1901 0.1786 0.1734 ERP(dBm) 20.97 21.21 21.00 21.44 21.17 21.04 ERP(Watts) 0.1250 0.1321 0.1259 0.1393 0.1309 0.1271 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: A21 of A22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B Bandwidth 1.4M 3M 5M LTE Band 26 (GT - LC = 0.80 dB) 16QAM Channel Frequency
(MHz) Conducted Power (dBm) Conducted Power
(Watts) 26797 26915 27033 26805 26915 27025 26815 26915 27015
(Low)
(Mid)
(High)
(Low)
(Mid)
(High)
(Low)
(Mid)
(High) 824.7 836.5 848.3 825.5 836.5 847.5 826.5 836.5 846.5 22.61 22.71 22.57 22.57 22.69 22.52 22.53 22.69 22.62 0.1824 0.1866 0.1807 0.1807 0.1858 0.1786 0.1791 0.1858 0.1828 ERP(dBm) 21.26 21.36 21.22 21.22 21.34 21.17 21.18 21.34 21.27 ERP(Watts) 0.1337 0.1368 0.1324 0.1324 0.1361 0.1309 0.1312 0.1361 0.1340 Bandwidth Channel Frequency
(MHz) Conducted Power (dBm) Conducted Power
(Watts) LTE Band 26 (GT - LC = 0.80 dB) 16QAM 26840
(Low) 10M 26915
(Mid) 26990
(High) 26865
(Low) 15M 26915
(Mid) 26965
(High) 829 836.5 844 831.5 836.5 841.5 22.59 22.70 22.61 22.78 22.77 22.56 0.1816 0.1862 0.1824 0.1897 0.1892 0.1803 ERP(dBm) 21.24 21.35 21.26 21.43 21.42 21.21 ERP(Watts) 0.1330 0.1365 0.1337 0.1390 0.1387 0.1321 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: A22 of A22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B Appendix B. Test Results of Radiated Test Radiated Spurious Emission Channel Frequency EIRP Limit
( MHz )
( dBm )
( dBm ) 3700.32 5550.48 7400.64 3700.32 5550.48 7400.64 3758.92 5638.38 7517.84 3758.92 5638.38 7517.84 3817.52 5726.28 7635.04 3817.52 5726.28 7635.04
-53.14
-57.89
-55.83
-48.48
-57.81
-55.98
-51.73
-58.00
-56.32
-48.41
-57.29
-56.18
-54.25
-57.55
-56.46
-52.53
-57.04
-55.33
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13 Lowest Middle Highest LTE Band 2 / 1.4MHz / QPSK Over Limit
( dB )
-40.14
-44.89
-42.83
-35.48
-44.81
-42.98
-38.73
-45.00
-43.32
-35.41
-44.29
-43.18
-41.25
-44.55
-43.46
-39.53
-44.04
-42.33 SPA S.G. TX Cable Reading
(dBm) Power
( dBm ) loss
( dB )
-75.74
-81.80
-82.17
-72.77
-82.15
-82.29
-73.67
-81.62
-82.25
-73.51
-81.06
-82.1
-76.63
-81.67
-81.98
-76.51
-81.64
-81.53
-59.90
-63.61
-58.99
-55.24
-63.53
-59.14
-58.48
-63.80
-59.47
-55.16
-63.09
-59.33
-60.99
-63.36
-59.62
-59.27
-62.85
-58.49 5.82 7.28 8.32 5.82 7.28 8.32 5.85 7.30 8.35 5.85 7.30 8.35 5.88 7.32 8.38 5.88 7.32 8.38 Remark: Spurious emissions within 30-1000MHz were found more than 20dB below limit line. TX Antenna Polarization Gain
(dBi) 12.58 13.00 11.48 12.58 13.00 11.48 12.60 13.10 11.50 12.60 13.10 11.50 12.62 13.13 11.54 12.62 13.13 11.54
(H/V) H H H V V V H H H V V V H H H V V V Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: B1 of B22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B Channel Frequency EIRP Limit
( MHz )
( dBm )
( dBm ) 3700.48 5550.72 7400.96 3700.48 5550.72 7400.96 3757.48 5636.22 7514.96 3757.48 5636.22 7514.96 3814.48 5721.72 7628.96 3814.48 5721.72 7628.96
-52.86
-57.45
-55.56
-47.72
-57.15
-55.71
-51.23
-57.54
-56.27
-49.89
-57.68
-56.15
-50.64
-57.51
-55.87
-45.53
-56.69
-55.36
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13 Lowest Middle Highest LTE Band 2 / 3MHz / QPSK Over Limit
( dB )
-39.86
-44.45
-42.56
-34.72
-44.15
-42.71
-38.23
-44.54
-43.27
-36.89
-44.68
-43.15
-37.64
-44.51
-42.87
-32.53
-43.69
-42.36 SPA S.G. TX Cable Reading
(dBm) Power
( dBm ) loss
( dB )
-75.46
-81.36
-81.90
-72.01
-81.49
-82.02
-73.17
-81.16
-82.21
-74.99
-81.45
-82.08
-73.02
-81.63
-81.39
-69.51
-81.29
-81.56
-59.62
-63.17
-58.72
-54.48
-62.87
-58.87
-57.98
-63.34
-59.42
-56.64
-63.48
-59.30
-57.38
-63.32
-59.03
-52.27
-62.50
-58.52 5.82 7.28 8.32 5.82 7.28 8.32 5.85 7.30 8.35 5.85 7.30 8.35 5.88 7.32 8.38 5.88 7.32 8.38 Remark: Spurious emissions within 30-1000MHz were found more than 20dB below limit line. TX Antenna Polarization Gain
(dBi) 12.58 13.00 11.48 12.58 13.00 11.48 12.60 13.10 11.50 12.60 13.10 11.50 12.62 13.13 11.54 12.62 13.13 11.54
(H/V) H H H V V V H H H V V V H H H V V V Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: B2 of B22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B Channel Frequency EIRP Limit
( MHz )
( dBm )
( dBm ) 3700.68 5551.02 7401.36 3700.68 5551.02 7401.36 3755.68 5633.52 7511.36 3755.68 5633.52 7511.36 3810.68 5716.02 7621.36 3810.68 5716.02 7621.36
-47.76
-57.89
-56.00
-44.48
-57.84
-56.04
-52.44
-58.21
-56.09
-48.41
-57.82
-56.46
-50.88
-57.66
-56.38
-47.01
-57.03
-55.88
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13 Lowest Middle Highest LTE Band 2 / 5MHz / QPSK Over Limit
( dB )
-34.76
-44.89
-43.00
-31.48
-44.84
-43.04
-39.44
-45.21
-43.09
-35.41
-44.82
-43.46
-37.88
-44.66
-43.38
-34.01
-44.03
-42.88 SPA S.G. TX Cable Reading
(dBm) Power
( dBm ) loss
( dB )
-70.36
-81.80
-82.34
-68.77
-82.18
-82.35
-74.38
-81.83
-82.03
-73.51
-81.59
-82.39
-73.16
-81.68
-81.94
-70.93
-81.47
-81.78
-54.52
-63.61
-59.16
-51.24
-63.56
-59.20
-59.19
-64.01
-59.24
-55.16
-63.62
-59.61
-57.62
-63.47
-59.54
-53.75
-62.84
-59.04 5.82 7.28 8.32 5.82 7.28 8.32 5.85 7.30 8.35 5.85 7.30 8.35 5.88 7.32 8.38 5.88 7.32 8.38 Remark: Spurious emissions within 30-1000MHz were found more than 20dB below limit line. TX Antenna Polarization Gain
(dBi) 12.58 13.00 11.48 12.58 13.00 11.48 12.60 13.10 11.50 12.60 13.10 11.50 12.62 13.13 11.54 12.62 13.13 11.54
(H/V) H H H V V V H H H V V V H H H V V V Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: B3 of B22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B Channel Frequency EIRP Limit
( MHz )
( dBm )
( dBm ) 3701.18 5551.77 7402.36 3701.18 5551.77 7402.36 3751.18 5626.77 7502 3751.18 5626.77 7502 3801.18 5701.77 7602.36 3801.18 5701.77 7602.36
-53.48
-57.76
-55.59
-44.59
-57.63
-56.06
-53.31
-58.29
-56.11
-44.56
-57.54
-56.12
-50.24
-57.65
-56.36
-46.36
-57.34
-56.53
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13 Lowest Middle Highest LTE Band 2 / 10MHz / QPSK Over Limit
( dB )
-40.48
-44.76
-42.59
-31.59
-44.63
-43.06
-40.31
-45.29
-43.11
-31.56
-44.54
-43.12
-37.24
-44.65
-43.36
-33.36
-44.34
-43.53 SPA S.G. TX Cable Reading
(dBm) Power
( dBm ) loss
( dB )
-76.08
-81.67
-81.93
-68.88
-81.97
-82.37
-75.25
-81.99
-82.11
-69.66
-81.74
-82.11
-72.52
-81.67
-81.97
-70.28
-81.78
-82.14
-60.24
-63.48
-58.75
-51.35
-63.35
-59.22
-60.06
-64.09
-59.26
-51.31
-63.34
-59.27
-56.98
-63.46
-59.52
-53.10
-63.15
-59.69 5.82 7.28 8.32 5.82 7.28 8.32 5.85 7.30 8.35 5.85 7.30 8.35 5.88 7.32 8.38 5.88 7.32 8.38 Remark: Spurious emissions within 30-1000MHz were found more than 20dB below limit line. TX Antenna Polarization Gain
(dBi) 12.58 13.00 11.48 12.58 13.00 11.48 12.60 13.10 11.50 12.60 13.10 11.50 12.62 13.13 11.54 12.62 13.13 11.54
(H/V) H H H V V V H H H V V V H H H V V V Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: B4 of B22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B Channel Frequency EIRP Limit
( MHz )
( dBm )
( dBm ) 3701.68 5552.52 7403.36 3701.68 5552.52 7403.36 3746.68 5620.02 7493.36 3746.68 5620.02 7493.36 3791.68 5687.52 7583.36 3791.68 5687.52 7583.36
-51.30
-57.91
-55.90
-46.59
-57.32
-56.29
-50.22
-57.82
-56.45
-45.97
-57.53
-56.26
-51.53
-57.22
-56.43
-49.75
-57.42
-56.58
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13 Lowest Middle Highest LTE Band 2 / 15MHz / QPSK Over Limit
( dB )
-38.30
-44.91
-42.90
-33.59
-44.32
-43.29
-37.22
-44.82
-43.45
-32.97
-44.53
-43.26
-38.53
-44.22
-43.43
-36.75
-44.42
-43.58 SPA S.G. TX Cable Reading
(dBm) Power
( dBm ) loss
( dB )
-73.90
-81.82
-82.24
-70.88
-81.66
-82.6
-72.16
-81.52
-82.45
-71.07
-81.73
-82.25
-74.36
-81.14
-82.11
-74.07
-81.69
-82.26
-58.06
-63.63
-59.06
-53.35
-63.04
-59.45
-56.97
-63.62
-59.60
-52.72
-63.33
-59.41
-58.27
-63.03
-59.59
-56.49
-63.23
-59.74 5.82 7.28 8.32 5.82 7.28 8.32 5.85 7.30 8.35 5.85 7.30 8.35 5.88 7.32 8.38 5.88 7.32 8.38 Remark: Spurious emissions within 30-1000MHz were found more than 20dB below limit line. TX Antenna Polarization Gain
(dBi) 12.58 13.00 11.48 12.58 13.00 11.48 12.60 13.10 11.50 12.60 13.10 11.50 12.62 13.13 11.54 12.62 13.13 11.54
(H/V) H H H V V V H H H V V V H H H V V V Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: B5 of B22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B Channel Frequency EIRP Limit
( MHz )
( dBm )
( dBm ) 3702.18 5553.27 7404.36 3702.18 5553.27 7404.36 3742.18 5613.27 7484.36 3742.18 5613.27 7484.36 3782.18 5673.27 7564.36 3782.18 5673.27 7564.36
-53.01
-58.13
-56.08
-48.97
-57.53
-56.14
-52.13
-58.26
-56.81
-50.52
-57.29
-56.87
-52.08
-58.13
-56.93
-50.66
-57.70
-56.76
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13 Lowest Middle Highest LTE Band 2 / 20MHz / QPSK Over Limit
( dB )
-40.01
-45.13
-43.08
-35.97
-44.53
-43.14
-39.13
-45.26
-43.81
-37.52
-44.29
-43.87
-39.08
-45.13
-43.93
-37.66
-44.70
-43.76 SPA S.G. TX Cable Reading
(dBm) Power
( dBm ) loss
( dB )
-75.61
-82.04
-82.42
-73.26
-81.87
-82.45
-74.62
-82.04
-82.88
-75.02
-81.92
-82.92
-74.91
-81.95
-82.68
-74.98
-81.81
-82.5
-59.77
-63.85
-59.24
-55.73
-63.25
-59.30
-58.88
-64.06
-59.96
-57.27
-63.09
-60.02
-58.82
-63.94
-60.09
-57.40
-63.51
-59.92 5.82 7.28 8.32 5.82 7.28 8.32 5.85 7.30 8.35 5.85 7.30 8.35 5.88 7.32 8.38 5.88 7.32 8.38 Remark: Spurious emissions within 30-1000MHz were found more than 20dB below limit line. TX Antenna Polarization Gain
(dBi) 12.58 13.00 11.48 12.58 13.00 11.48 12.60 13.10 11.50 12.60 13.10 11.50 12.62 13.13 11.54 12.62 13.13 11.54
(H/V) H H H V V V H H H V V V H H H V V V Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: B6 of B22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B Channel Frequency EIRP Limit
( MHz )
( dBm )
( dBm ) 3420.32 5130.48 6840.64 3420.32 5130.48 6840.64 3463.74 5195.61 6927.48 3463.74 5195.61 6927.48 3507.52 5261.28 7015.04 3507.52 5261.28 7015.04
-51.17
-58.38
-48.76
-45.06
-57.57
-50.41
-48.13
-58.11
-54.12
-44.33
-57.82
-54.59
-45.69
-57.71
-55.63
-41.52
-58.17
-55.82
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13 Lowest Middle Highest LTE Band 4 / 1.4MHz / QPSK Over Limit
( dB )
-38.17
-45.38
-35.76
-32.06
-44.57
-37.41
-35.13
-45.11
-41.12
-31.33
-44.82
-41.59
-32.69
-44.71
-42.63
-28.52
-45.17
-42.82 SPA S.G. TX Cable Reading
(dBm) Power
( dBm ) loss
( dB )
-71.32
-81.50
-73.76
-66.41
-81.43
-77.24
-69.67
-81.71
-79.27
-65.67
-81.69
-80.66
-67.62
-81.55
-80.96
-63.85
-81.89
-81.5
-58.05
-64.06
-52.15
-51.94
-63.25
-53.80
-54.98
-63.78
-57.52
-51.18
-63.49
-57.99
-52.53
-63.38
-59.06
-48.36
-63.84
-59.25 5.60 7.10 8.38 5.60 7.10 8.38 5.65 7.13 8.40 5.65 7.13 8.40 5.68 7.15 8.42 5.68 7.15 8.42 Remark: Spurious emissions within 30-1000MHz were found more than 20dB below limit line. TX Antenna Polarization Gain
(dBi) 12.48 12.78 11.77 12.48 12.78 11.77 12.50 12.80 11.80 12.50 12.80 11.80 12.52 12.82 11.85 12.52 12.82 11.85
(H/V) H H H V V V H H H V V V H H H V V V Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: B7 of B22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B Channel Frequency EIRP Limit
( MHz )
( dBm )
( dBm ) 3420.48 5130.72 6840.96 3420.48 5130.72 6840.96 3462.48 5193.72 6924.96 3462.48 5193.72 6924.96 3504.48 5256.72 7008.96 3504.48 5256.72 7008.96
-52.22
-58.51
-53.74
-45.24
-57.82
-49.14
-48.20
-58.06
-54.51
-44.38
-58.03
-54.74
-45.69
-57.69
-54.64
-40.61
-58.16
-56.16
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13 Lowest Middle Highest LTE Band 4 / 3MHz / QPSK Over Limit
( dB )
-39.22
-45.51
-40.74
-32.24
-44.82
-36.14
-35.20
-45.06
-41.51
-31.38
-45.03
-41.74
-32.69
-44.69
-41.64
-27.61
-45.16
-43.16 SPA S.G. TX Cable Reading
(dBm) Power
( dBm ) loss
( dB )
-72.37
-81.63
-78.74
-66.59
-81.68
-75.97
-69.74
-81.66
-79.66
-65.72
-81.9
-80.81
-66.82
-81.47
-79.90
-63.28
-81.91
-81.6
-59.10
-64.19
-57.13
-52.12
-63.50
-52.53
-55.05
-63.73
-57.91
-51.23
-63.70
-58.14
-52.53
-63.36
-58.07
-47.45
-63.83
-59.59 5.60 7.10 8.38 5.60 7.10 8.38 5.65 7.13 8.40 5.65 7.13 8.40 5.68 7.15 8.42 5.68 7.15 8.42 Remark: Spurious emissions within 30-1000MHz were found more than 20dB below limit line. TX Antenna Polarization Gain
(dBi) 12.48 12.78 11.77 12.48 12.78 11.77 12.50 12.80 11.80 12.50 12.80 11.80 12.52 12.82 11.85 12.52 12.82 11.85
(H/V) H H H V V V H H H V V V H H H V V V Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: B8 of B22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B Channel Frequency EIRP Limit
( MHz )
( dBm )
( dBm ) 3420.68 5131.02 6841.36 3420.68 5131.02 6841.36 3460.68 5191.02 6921.36 3460.68 5191.02 6921.36 3500.68 5251.02 7001.36 3500.68 5251.02 7001.36
-52.66
-59.06
-50.33
-45.70
-58.22
-47.54
-48.00
-58.77
-55.12
-45.99
-58.46
-50.88
-46.37
-58.08
-55.10
-43.53
-58.89
-56.17
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13 Lowest Middle Highest LTE Band 4 / 5MHz / QPSK Over Limit
( dB )
-39.66
-46.06
-37.33
-32.70
-45.22
-34.54
-35.00
-45.77
-42.12
-32.99
-45.46
-37.88
-33.37
-45.08
-42.10
-30.53
-45.89
-43.17 SPA S.G. TX Cable Reading
(dBm) Power
( dBm ) loss
( dB )
-72.81
-82.18
-75.33
-67.05
-82.08
-74.37
-69.54
-82.37
-80.23
-67.33
-82.33
-77.09
-67.50
-81.86
-80.37
-66.2
-82.64
-81.62
-59.54
-64.74
-53.72
-52.58
-63.90
-50.93
-54.85
-64.44
-58.52
-52.84
-64.13
-54.28
-53.21
-63.75
-58.53
-50.37
-64.56
-59.60 5.60 7.10 8.38 5.60 7.10 8.38 5.65 7.13 8.40 5.65 7.13 8.40 5.68 7.15 8.42 5.68 7.15 8.42 Remark: Spurious emissions within 30-1000MHz were found more than 20dB below limit line. TX Antenna Polarization Gain
(dBi) 12.48 12.78 11.77 12.48 12.78 11.77 12.50 12.80 11.80 12.50 12.80 11.80 12.52 12.82 11.85 12.52 12.82 11.85
(H/V) H H H V V V H H H V V V H H H V V V Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: B9 of B22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B Channel Frequency EIRP Limit
( MHz )
( dBm )
( dBm ) 3421.18 5131.77 6842.36 3421.18 5131.77 6842.36 3456.18 5184.27 6912.36 3456.18 5184.27 6912.36 3491.18 5236.77 6982.36 3491.18 5236.77 6982.36
-52.86
-58.73
-52.05
-47.07
-57.89
-49.34
-47.61
-58.94
-54.26
-44.70
-58.07
-54.60
-48.15
-58.54
-56.29
-42.94
-58.21
-56.06
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13 Lowest Middle Highest LTE Band 4 / 10MHz / QPSK Over Limit
( dB )
-39.86
-45.73
-39.05
-34.07
-44.89
-36.34
-34.61
-45.94
-41.26
-31.70
-45.07
-41.60
-35.15
-45.54
-43.29
-29.94
-45.21
-43.06 SPA S.G. TX Cable Reading
(dBm) Power
( dBm ) loss
( dB )
-73.01
-81.85
-77.05
-68.42
-81.75
-76.17
-68.35
-82.42
-79.37
-66.38
-81.94
-80.81
-69.28
-82.26
-81.52
-65.61
-82
-81.66
-59.74
-64.41
-55.44
-53.95
-63.57
-52.73
-54.46
-64.61
-57.66
-51.55
-63.74
-58.00
-54.99
-64.21
-59.72
-49.78
-63.88
-59.49 5.60 7.10 8.38 5.60 7.10 8.38 5.65 7.13 8.40 5.65 7.13 8.40 5.68 7.15 8.42 5.68 7.15 8.42 Remark: Spurious emissions within 30-1000MHz were found more than 20dB below limit line. TX Antenna Polarization Gain
(dBi) 12.48 12.78 11.77 12.48 12.78 11.77 12.50 12.80 11.80 12.50 12.80 11.80 12.52 12.82 11.85 12.52 12.82 11.85
(H/V) H H H V V V H H H V V V H H H V V V Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: B10 of B22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B Channel Frequency EIRP Limit
( MHz )
( dBm )
( dBm ) 3421.68 5132.52 6843.36 3421.68 5132.52 6843.36 3451.68 5177.52 6903.36 3451.68 5177.52 6903.36 3481.68 5222.52 6963.36 3481.68 5222.52 6963.36
-52.33
-58.42
-50.72
-55.82
-57.61
-47.18
-50.47
-57.88
-54.68
-45.91
-57.83
-54.05
-56.43
-57.92
-55.27
-42.17
-58.16
-55.72
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13 Lowest Middle Highest LTE Band 4 / 15MHz / QPSK Over Limit
( dB )
-39.33
-45.42
-37.72
-42.82
-44.61
-34.18
-37.47
-44.88
-41.68
-32.91
-44.83
-41.05
-43.43
-44.92
-42.27
-29.17
-45.16
-42.72 SPA S.G. TX Cable Reading
(dBm) Power
( dBm ) loss
( dB )
-72.48
-81.54
-75.72
-77.17
-81.47
-74.01
-71.21
-81.36
-79.76
-67.59
-81.7
-80.41
-77.76
-81.58
-80.47
-64.17
-81.99
-81.47
-59.21
-64.10
-54.11
-62.70
-63.29
-50.57
-57.32
-63.55
-58.08
-52.76
-63.50
-57.45
-63.27
-63.59
-58.70
-49.01
-63.83
-59.15 5.60 7.10 8.38 5.60 7.10 8.38 5.65 7.13 8.40 5.65 7.13 8.40 5.68 7.15 8.42 5.68 7.15 8.42 Remark: Spurious emissions within 30-1000MHz were found more than 20dB below limit line. TX Antenna Polarization Gain
(dBi) 12.48 12.78 11.77 12.48 12.78 11.77 12.50 12.80 11.80 12.50 12.80 11.80 12.52 12.82 11.85 12.52 12.82 11.85
(H/V) H H H V V V H H H V V V H H H V V V Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: B11 of B22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B Channel Frequency EIRP Limit
( MHz )
( dBm )
( dBm ) 3422.18 5133.27 6844.36 3422.18 5133.27 6844.36 3447.18 5170.77 6894.36 3447.18 5170.77 6894.36 3472.18 5208.27 6944.36 3472.18 5208.27 6944.36
-51.45
-58.15
-55.83
-56.76
-57.85
-48.42
-53.05
-58.15
-54.31
-45.02
-57.71
-54.48
-47.27
-58.03
-52.77
-43.29
-58.22
-54.52
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13 Lowest Middle Highest LTE Band 4 / 20MHz / QPSK Over Limit
( dB )
-38.45
-45.15
-42.83
-43.76
-44.85
-35.42
-40.05
-45.15
-41.31
-32.02
-44.71
-41.48
-34.27
-45.03
-39.77
-30.29
-45.22
-41.52 SPA S.G. TX Cable Reading
(dBm) Power
( dBm ) loss
( dB )
-71.60
-81.27
-80.83
-78.11
-81.71
-75.25
-73.79
-81.51
-79.40
-66.7
-81.57
-80.85
-68.81
-81.69
-77.95
-64.63
-82.05
-80.43
-58.33
-63.83
-59.22
-63.64
-63.53
-51.81
-59.90
-63.82
-57.71
-51.87
-63.38
-57.88
-54.11
-63.70
-56.20
-50.13
-63.89
-57.95 5.60 7.10 8.38 5.60 7.10 8.38 5.65 7.13 8.40 5.65 7.13 8.40 5.68 7.15 8.42 5.68 7.15 8.42 Remark: Spurious emissions within 30-1000MHz were found more than 20dB below limit line. TX Antenna Polarization Gain
(dBi) 12.48 12.78 11.77 12.48 12.78 11.77 12.50 12.80 11.80 12.50 12.80 11.80 12.52 12.82 11.85 12.52 12.82 11.85
(H/V) H H H V V V H H H V V V H H H V V V Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: B12 of B22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B LTE Band 12 / 1.4MHz / QPSK Channel Frequency EIRP Limit
( MHz )
( dBm )
( dBm ) 1398.14 2097.21 2796.28 1398.14 2097.21 2796.28 1413.74 2120.61 2827.48 1413.74 2120.61 2827.48 1429.34 2144.01 2858.68 1429.34 2144.01 2858.68
-49.49
-61.05
-60.20
-49.45
-61.55
-59.48
-48.84
-61.45
-60.20
-50.49
-61.68
-59.04
-51.83
-61.30
-60.33
-53.97
-61.54
-58.95
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13 Lowest Middle Highest Over Limit
( dB )
-36.49
-48.05
-47.20
-36.45
-48.55
-46.48
-35.84
-48.45
-47.20
-37.49
-48.68
-46.04
-38.83
-48.30
-47.33
-40.97
-48.54
-45.95 SPA S.G. TX Cable Reading
(dBm) Power
( dBm ) loss
( dB )
-59.42
-78.22
-78.74
-60.41
-78.51
-78.78
-58.76
-78.71
-78.80
-61.47
-78.71
-78.45
-61.83
-78.65
-79.04
-64.97
-78.64
-78.57
-52.72
-64.60
-65.13
-52.68
-65.10
-64.41
-52.09
-65.02
-65.13
-53.74
-65.25
-63.97
-55.00
-64.88
-65.25
-57.14
-65.12
-63.87 3.98 4.85 5.50 3.98 4.85 5.50 4.00 4.88 5.52 4.00 4.88 5.52 4.10 4.90 5.55 4.10 4.90 5.55 Remark: Spurious emissions within 30-1000MHz were found more than 20dB below limit line. TX Antenna Polarization Gain
(dBi) 9.36 10.55 12.58 9.36 10.55 12.58 9.40 10.60 12.60 9.40 10.60 12.60 9.42 10.63 12.62 9.42 10.63 12.62
(H/V) H H H V V V H H H V V V H H H V V V Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: B13 of B22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B Channel Frequency EIRP Limit
( MHz )
( dBm )
( dBm ) 1398.3 2097.45 2796.6 1398.3 2097.45 2796.6 1412.3 2118.45 2824.6 1412.3 2118.45 2824.6 1426.3 2139.45 2852.6 1426.3 2139.45 2852.6
-48.68
-61.47
-60.34
-51.27
-61.22
-59.28
-49.40
-61.40
-60.21
-50.12
-60.54
-59.26
-53.47
-61.26
-60.11
-53.51
-61.18
-59.28
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13 Lowest Middle Highest LTE Band 12 / 3MHz / QPSK Over Limit
( dB )
-35.68
-48.47
-47.34
-38.27
-48.22
-46.28
-36.40
-48.40
-47.21
-37.12
-47.54
-46.26
-40.47
-48.26
-47.11
-40.51
-48.18
-46.28 SPA S.G. TX Cable Reading
(dBm) Power
( dBm ) loss
( dB )
-58.61
-78.64
-78.88
-62.23
-78.18
-78.58
-59.32
-78.66
-78.81
-61.10
-77.57
-78.67
-63.47
-78.61
-78.82
-64.51
-78.28
-78.90
-51.91
-65.02
-65.27
-54.50
-64.77
-64.21
-52.65
-64.97
-65.14
-53.37
-64.11
-64.19
-56.64
-64.84
-65.03
-56.68
-64.76
-64.20 3.98 4.85 5.50 3.98 4.85 5.50 4.00 4.88 5.52 4.00 4.88 5.52 4.10 4.90 5.55 4.10 4.90 5.55 Remark: Spurious emissions within 30-1000MHz were found more than 20dB below limit line. TX Antenna Polarization Gain
(dBi) 9.36 10.55 12.58 9.36 10.55 12.58 9.40 10.60 12.60 9.40 10.60 12.60 9.42 10.63 12.62 9.42 10.63 12.62
(H/V) H H H V V V H H H V V V H H H V V V Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: B14 of B22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B Channel Frequency EIRP Limit
( MHz )
( dBm )
( dBm ) 1398.5 2097.75 2797 1398.5 2097.75 2797 1410.5 2115.75 2821 1410.5 2115.75 2821 1422.5 2133.75 2845 1422.5 2133.75 2845
-46.78
-61.42
-60.48
-50.60
-61.63
-59.63
-48.96
-60.59
-60.07
-50.82
-61.30
-59.11
-51.26
-61.45
-60.19
-53.12
-61.28
-59.06
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13 Lowest Middle Highest LTE Band 12 / 5MHz / QPSK Over Limit
( dB )
-33.78
-48.42
-47.48
-37.60
-48.63
-46.63
-35.96
-47.59
-47.07
-37.82
-48.30
-46.11
-38.26
-48.45
-47.19
-40.12
-48.28
-46.06 SPA S.G. TX Cable Reading
(dBm) Power
( dBm ) loss
( dB )
-56.71
-78.59
-79.02
-61.56
-78.59
-78.93
-58.88
-77.85
-78.67
-61.80
-78.33
-78.52
-61.26
-78.80
-78.90
-64.12
-78.38
-78.68
-50.01
-64.97
-65.41
-53.83
-65.18
-64.56
-52.21
-64.16
-65.00
-54.07
-64.87
-64.04
-54.43
-65.03
-65.11
-56.29
-64.86
-63.98 3.98 4.85 5.50 3.98 4.85 5.50 4.00 4.88 5.52 4.00 4.88 5.52 4.10 4.90 5.55 4.10 4.90 5.55 Remark: Spurious emissions within 30-1000MHz were found more than 20dB below limit line. TX Antenna Polarization Gain
(dBi) 9.36 10.55 12.58 9.36 10.55 12.58 9.40 10.60 12.60 9.40 10.60 12.60 9.42 10.63 12.62 9.42 10.63 12.62
(H/V) H H H V V V H H H V V V H H H V V V Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: B15 of B22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B Channel Frequency EIRP Limit
( MHz )
( dBm )
( dBm ) 1399 2098.5 2798 1399 2098.5 2798 1406 2109 2812 1406 2109 2812 1413 2119.5 2826 1413 2119.5 2826
-46.07
-61.26
-60.22
-51.13
-61.27
-59.15
-53.16
-61.44
-60.14
-49.59
-61.26
-59.23
-48.62
-61.42
-60.23
-51.55
-61.41
-58.83
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13 Lowest Middle Highest LTE Band 12 / 10MHz / QPSK Over Limit
( dB )
-33.07
-48.26
-47.22
-38.13
-48.27
-46.15
-40.16
-48.44
-47.14
-36.59
-48.26
-46.23
-35.62
-48.42
-47.23
-38.55
-48.41
-45.83 SPA S.G. TX Cable Reading
(dBm) Power
( dBm ) loss
( dB )
-56.00
-78.43
-78.76
-62.09
-78.23
-78.45
-63.08
-78.61
-78.74
-60.57
-78.22
-78.64
-58.54
-78.68
-78.83
-62.53
-78.44
-78.24
-49.30
-64.81
-65.15
-54.36
-64.82
-64.08
-56.41
-65.01
-65.07
-52.84
-64.83
-64.16
-51.79
-65.00
-65.15
-54.72
-64.99
-63.75 3.98 4.85 5.50 3.98 4.85 5.50 4.00 4.88 5.52 4.00 4.88 5.52 4.10 4.90 5.55 4.10 4.90 5.55 Remark: Spurious emissions within 30-1000MHz were found more than 20dB below limit line. TX Antenna Polarization Gain
(dBi) 9.36 10.55 12.58 9.36 10.55 12.58 9.40 10.60 12.60 9.40 10.60 12.60 9.42 10.63 12.62 9.42 10.63 12.62
(H/V) H H H V V V H H H V V V H H H V V V Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: B16 of B22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B Channel Frequency EIRP Limit
( MHz )
( dBm )
( dBm ) 1554.5 2331.75 3109 1554.5 2331.75 3109 1554.5 2331.75 3109 1554.5 2331.75 3109 1564.5 2346.75 3129 1564.5 2346.75 3129
-63.53
-60.00
-58.13
-63.25
-60.22
-57.08
-65.99
-60.82
-59.38
-65.00
-60.80
-57.68
-65.53
-61.41
-59.49
-66.52
-60.51
-57.42
-13
-13
-13
-13
-13
-13
-40
-13
-13
-40
-13
-13
-40
-13
-13
-40
-13
-13 Lowest Middle Highest LTE Band 13 / 5MHz / QPSK Over Limit
( dB )
-50.53
-47.00
-45.13
-50.25
-47.22
-44.08
-25.99
-47.82
-46.38
-25.00
-47.80
-44.68
-25.53
-48.41
-46.49
-26.52
-47.51
-44.42 SPA S.G. TX Cable Reading
(dBm) Power
( dBm ) loss
( dB )
-73.89
-77.68
-77.63
-74.23
-78.18
-78.31
-76.35
-78.50
-78.88
-75.98
-78.76
-78.91
-75.89
-79.09
-79.03
-77.50
-78.56
-78.76
-66.76
-63.55
-63.06
-66.48
-63.77
-62.01
-69.24
-64.39
-64.31
-68.25
-64.37
-62.61
-68.70
-64.99
-64.41
-69.69
-64.09
-62.34 3.98 4.85 5.50 3.98 4.85 5.50 4.00 4.88 5.52 4.00 4.88 5.52 4.10 4.90 5.55 4.10 4.90 5.55 Remark: Spurious emissions within 30-1000MHz were found more than 20dB below limit line. Channel Frequency EIRP Limit
( MHz )
( dBm )
( dBm ) 1555 2332.5 3110 1555 2332.5 3110
-65.15
-61.32
-59.48
-66.64
-60.90
-57.47
-40
-13
-13
-40
-13
-13 Middle LTE Band 13 / 10MHz / QPSK Over Limit
( dB )
-25.15
-48.32
-46.48
-26.64
-47.90
-44.47 SPA S.G. TX Cable Reading
(dBm) Power
( dBm )
-75.51
-79.00
-78.98
-77.62
-78.86
-78.70
-68.40
-64.89
-64.41
-69.89
-64.47
-62.40 loss
( dB ) 4.00 4.88 5.52 4.00 4.88 5.52 Remark: Spurious emissions within 30-1000MHz were found more than 20dB below limit line. TX Antenna Polarization Gain
(dBi) 9.36 10.55 12.58 9.36 10.55 12.58 9.40 10.60 12.60 9.40 10.60 12.60 9.42 10.63 12.62 9.42 10.63 12.62 Gain
(dBi) 9.40 10.60 12.60 9.40 10.60 12.60
(H/V) H H H V V V H H H V V V H H H V V V
(H/V) H H H V V V TX Antenna Polarization Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: B17 of B22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B LTE Band 26 / 1.4MHz / QPSK Channel Frequency EIRP Limit
( MHz )
( dBm )
( dBm ) 1648.14 2472.21 3296.28 1648.14 2472.21 3296.28 1671.74 2507.61 3343.48 1671.74 2507.61 3343.48 1695.34 2543.01 3390.68 1695.34 2543.01 3390.68
-67.26
-60.49
-59.29
-65.73
-60.17
-58.47
-66.71
-59.98
-59.29
-66.50
-59.84
-59.03
-66.85
-60.23
-60.47
-66.07
-59.75
-58.94
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13 Lowest Middle Highest Over Limit
( dB )
-54.26
-47.49
-46.29
-52.73
-47.17
-45.47
-53.71
-46.98
-46.29
-53.50
-46.84
-46.03
-53.85
-47.23
-47.47
-53.07
-46.75
-45.94 SPA S.G. TX Cable Reading
(dBm) Power
( dBm ) loss
( dB )
-78.01
-78.83
-79.60
-77.12
-78.83
-79.67
-77.65
-78.58
-79.90
-78.15
-78.65
-79.94
-78.11
-78.96
-79.82
-78.00
-78.70
-79.62
-70.49
-64.04
-64.22
-68.96
-63.72
-63.40
-69.96
-63.55
-64.22
-69.75
-63.41
-63.96
-70.02
-63.81
-65.39
-69.24
-63.33
-63.86 3.98 4.85 5.50 3.98 4.85 5.50 4.00 4.88 5.52 4.00 4.88 5.52 4.10 4.90 5.55 4.10 4.90 5.55 Remark: Spurious emissions within 30-1000MHz were found more than 20dB below limit line. TX Antenna Polarization Gain
(dBi) 9.36 10.55 12.58 9.36 10.55 12.58 9.40 10.60 12.60 9.40 10.60 12.60 9.42 10.63 12.62 9.42 10.63 12.62
(H/V) H H H V V V H H H V V V H H H V V V Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: B18 of B22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B Channel Frequency EIRP Limit
( MHz )
( dBm )
( dBm ) 1648.3 2472.45 3296.6 1648.3 2472.45 3296.6 1670.3 2505.45 3340.6 1670.3 2505.45 3340.6 1692.3 2538.45 3384.6 1692.3 2538.45 3384.6
-66.87
-60.43
-58.98
-66.48
-60.14
-58.43
-66.99
-60.04
-59.29
-66.29
-59.88
-58.51
-66.77
-60.13
-60.45
-66.31
-59.66
-58.69
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13 Lowest Middle Highest LTE Band 26 / 3MHz / QPSK Over Limit
( dB )
-53.87
-47.43
-45.98
-53.48
-47.14
-45.43
-53.99
-47.04
-46.29
-53.29
-46.88
-45.51
-53.77
-47.13
-47.45
-53.31
-46.66
-45.69 SPA S.G. TX Cable Reading
(dBm) Power
( dBm ) loss
( dB )
-77.62
-78.77
-79.29
-77.87
-78.80
-79.63
-77.87
-78.64
-79.90
-77.84
-78.69
-79.42
-78.03
-78.80
-80.22
-78.24
-78.54
-79.45
-70.10
-63.98
-63.91
-69.71
-63.69
-63.36
-70.24
-63.61
-64.22
-69.54
-63.45
-63.44
-69.94
-63.71
-65.37
-69.48
-63.24
-63.61 3.98 4.85 5.50 3.98 4.85 5.50 4.00 4.88 5.52 4.00 4.88 5.52 4.10 4.90 5.55 4.10 4.90 5.55 Remark: Spurious emissions within 30-1000MHz were found more than 20dB below limit line. TX Antenna Polarization Gain
(dBi) 9.36 10.55 12.58 9.36 10.55 12.58 9.40 10.60 12.60 9.40 10.60 12.60 9.42 10.63 12.62 9.42 10.63 12.62
(H/V) H H H V V V H H H V V V H H H V V V Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: B19 of B22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B Channel Frequency EIRP Limit
( MHz )
( dBm )
( dBm ) 1648.5 2472.75 3297 1648.5 2472.75 3297 1668.5 2502.75 3337 1668.5 2502.75 3337 1688.5 2532.75 3377 1688.5 2532.75 3377
-66.73
-60.43
-59.32
-65.69
-60.10
-58.40
-66.77
-59.74
-59.06
-66.06
-59.62
-58.57
-66.80
-60.08
-60.06
-66.06
-59.96
-59.09
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13 Lowest Middle Highest LTE Band 26 / 5MHz / QPSK Over Limit
( dB )
-53.73
-47.43
-46.32
-52.69
-47.10
-45.40
-53.77
-46.74
-46.06
-53.06
-46.62
-45.57
-53.80
-47.08
-47.06
-53.06
-46.96
-46.09 SPA S.G. TX Cable Reading
(dBm) Power
( dBm ) loss
( dB )
-77.48
-78.77
-79.63
-77.08
-78.76
-79.60
-77.65
-78.21
-79.57
-77.61
-78.35
-79.58
-77.80
-78.75
-79.83
-77.77
-78.84
-79.85
-69.96
-63.98
-64.25
-68.92
-63.65
-63.33
-70.02
-63.31
-63.99
-69.31
-63.19
-63.50
-69.97
-63.66
-64.98
-69.23
-63.54
-64.01 3.98 4.85 5.50 3.98 4.85 5.50 4.00 4.88 5.52 4.00 4.88 5.52 4.10 4.90 5.55 4.10 4.90 5.55 Remark: Spurious emissions within 30-1000MHz were found more than 20dB below limit line. TX Antenna Polarization Gain
(dBi) 9.36 10.55 12.58 9.36 10.55 12.58 9.40 10.60 12.60 9.40 10.60 12.60 9.42 10.63 12.62 9.42 10.63 12.62
(H/V) H H H V V V H H H V V V H H H V V V Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: B20 of B22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B Channel Frequency EIRP Limit
( MHz )
( dBm )
( dBm ) 1649 2473.5 3298 1649 2473.5 3298 1664 2496 3328 1664 2496 3328 1679 2518.5 3358 1679 2518.5 3358
-66.86
-60.21
-59.03
-66.28
-60.03
-58.29
-65.72
-59.65
-58.84
-66.36
-60.09
-58.79
-66.34
-60.10
-58.83
-65.98
-60.15
-58.70
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13 Lowest Middle Highest LTE Band 26 / 10MHz / QPSK Over Limit
( dB )
-53.86
-47.21
-46.03
-53.28
-47.03
-45.29
-52.72
-46.65
-45.84
-53.36
-47.09
-45.79
-53.34
-47.10
-45.83
-52.98
-47.15
-45.70 SPA S.G. TX Cable Reading
(dBm) Power
( dBm ) loss
( dB )
-77.61
-78.55
-79.34
-77.67
-78.69
-79.49
-76.60
-78.12
-79.35
-77.91
-78.82
-79.80
-77.34
-78.70
-79.02
-77.69
-78.96
-79.54
-70.09
-63.76
-63.96
-69.51
-63.58
-63.22
-68.97
-63.22
-63.77
-69.61
-63.66
-63.72
-69.51
-63.68
-63.75
-69.15
-63.73
-63.62 3.98 4.85 5.50 3.98 4.85 5.50 4.00 4.88 5.52 4.00 4.88 5.52 4.10 4.90 5.55 4.10 4.90 5.55 Remark: Spurious emissions within 30-1000MHz were found more than 20dB below limit line. TX Antenna Polarization Gain
(dBi) 9.36 10.55 12.58 9.36 10.55 12.58 9.40 10.60 12.60 9.40 10.60 12.60 9.42 10.63 12.62 9.42 10.63 12.62
(H/V) H H H V V V H H H V V V H H H V V V Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: B21 of B22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0 FCC RF Test Report Report No. : FG961801B Channel Frequency EIRP Limit
( MHz )
( dBm )
( dBm ) 1649.5 2474.25 3299 1649.5 2474.25 3299 1659.5 2489.25 3319 1659.5 2489.25 3319 1669.5 2504.25 3339 1669.5 2504.25 3339
-66.91
-60.31
-59.15
-66.05
-59.80
-58.56
-65.92
-60.06
-59.17
-66.21
-59.87
-58.42
-67.11
-60.18
-59.37
-66.25
-60.36
-58.76
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13 Lowest Middle Highest LTE Band 26 / 15MHz / QPSK Over Limit
( dB )
-53.91
-47.31
-46.15
-53.05
-46.80
-45.56
-52.92
-47.06
-46.17
-53.21
-46.87
-45.42
-54.11
-47.18
-46.37
-53.25
-47.36
-45.76 SPA S.G. TX Cable Reading
(dBm) Power
( dBm ) loss
( dB )
-77.66
-78.65
-79.46
-77.44
-78.46
-79.76
-76.80
-78.53
-79.58
-77.76
-78.60
-79.53
-77.99
-78.65
-79.98
-77.80
-79.09
-79.67
-70.14
-63.86
-64.08
-69.28
-63.35
-63.49
-69.17
-63.63
-64.10
-69.46
-63.44
-63.35
-70.28
-63.76
-64.29
-69.42
-63.94
-63.68 3.98 4.85 5.50 3.98 4.85 5.50 4.00 4.88 5.52 4.00 4.88 5.52 4.10 4.90 5.55 4.10 4.90 5.55 Remark: Spurious emissions within 30-1000MHz were found more than 20dB below limit line. TX Antenna Polarization Gain
(dBi) 9.36 10.55 12.58 9.36 10.55 12.58 9.40 10.60 12.60 9.40 10.60 12.60 9.42 10.63 12.62 9.42 10.63 12.62
(H/V) H H H V V V H H H V V V H H H V V V Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: B22 of B22 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FGLTE Version 2.0
| 1 2 3 4 5 | Test report Band 26 | Test Report | 1.67 MiB | August 02 2019 / August 05 2019 |
FCC RF Test Report Report No. : FW961801 FCC RF Test Report APPLICANT
: PAX Technology Limited EQUIPMENT
: Mobile Payment Terminal BRAND NAME MODEL NAME
: PAX
: D190 FCC ID
: V5PD190LTE STANDARD
: 47 CFR Part 2, and 90(S) CLASSIFICATION
: PCS Licensed Transmitter (PCB) The product was installed a module during the test: LTE (CatM1,NB-IO) Module (Model Name:
M910-GL, FCC ID: ZMOM910GL ) during test. The product was received on Jun. 17, 2019 and completely tested on Jun. 25, 2019. We, Sporton International (ShenZhen) Inc., would like to declare that the tested sample has been evaluated in accordance with the procedures given in ANSI C63.26-2015 and shown compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of Sporton International (ShenZhen) Inc., the test report shall not be reproduced except in full. Reviewed by: Derreck Chen / Supervisor Approved by: Eric Shih / Manager Sporton International (ShenZhen) Inc. 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen, 518055 Peoples Republic of China Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 1 of 21 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FWLTE Version 2.0 FCC RF Test Report Report No. : FW961801 TABLE OF CONTENTS REVISION HISTORY .......................................................................................................................................... 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .......................................................................................................................... 5 1.1 Applicant ............................................................................................................................................ 5 1.2 Feature of Equipment Under Test ..................................................................................................... 5 1.3 Product Specification of Equipment Under Test ............................................................................... 5 1.4 Modification of EUT ........................................................................................................................... 5 1.5 Maximum Conducted Power, Frequency Tolerance and Emission Designator ................................ 6 1.6 Testing Site........................................................................................................................................ 7 1.7 Applied Standards ............................................................................................................................. 7 2 TEST CONFIGURATION OF EQUIPMENT UNDER TEST ........................................................................ 8 2.1 Test Mode.......................................................................................................................................... 8 2.2 Connection Diagram of Test System ................................................................................................ 8 2.3 Support Unit used in test configuration and system .......................................................................... 9 2.4 Frequency List of Low/Middle/High Channels ................................................................................... 9 3 TEST RESULT ........................................................................................................................................... 10 3.1 Conducted Output Power Measurement ......................................................................................... 10 3.2 Field Strength of Spurious Radiation Measurement ....................................................................... 11 4 LIST OF MEASURING EQUIPMENT ........................................................................................................ 13 5 UNCERTAINTY OF EVALUATION ........................................................................................................... 14 APPENDIX A. TEST RESULTS OF CONDUCTED TEST APPENDIX B. TEST RESULTS OF RADIATED TEST APPENDIX C. TEST SETUP PHOTOGRAPHS Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 2 of 21 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FWLTE Version 2.0 FCC RF Test Report Report No. : FW961801 REVISION HISTORY REPORT NO. VERSION DESCRIPTION ISSUED DATE FW961801 Rev. 01 Initial issue of report Jul. 29, 2019 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 3 of 21 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FWLTE Version 2.0 Report Section FCC RF Test Report Report No. : FW961801 SUMMARY OF TEST RESULT FCC Rule Description Limit Result Remark 3.1 2.1046 Conducted Output Power Reporting only PASS
-
-
-
3.2
-
2.1049 Occupied Bandwidth and 90.209 2.1051 90.691 2.1051 26dB Bandwidth Emission masks In-band emissions Emission masks 90.691 Out of band emissions 2.1053 Field Strength of Spurious 90.691 Radiation 2.1055 Frequency Stability for 90.213 Temperature & Voltage Reporting only PASS
< 50+10log10(P[Watts]) PASS
< 43+10log10(P[Watts]) PASS 1 1 1 1 Under limit
< 43+10log10(P[Watts]) PASS 44.49 dB at 3256.280 MHz
< 2.5 ppm PASS 1 Remark 1: The conducted test items were leverage from module RF report which can refer to Report No. SZEM180400321702. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 4 of 21 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FWLTE Version 2.0 FCC RF Test Report 1 General Description 1.1 Applicant PAX Technology Limited Report No. : FW961801 Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong 1.2 Feature of Equipment Under Test Equipment Brand Name Model Name FCC ID EUT supports Radios application IMEI Code HW Version SW Version EUT Stage Product Feature Mobile Payment Terminal PAX D190 V5PD190LTE GSM/LTE/NFC WLAN 2.4GHz 802.11b/g/n HT20 WLAN 5GHz 802.11a/n HT20/HT40 WLAN 5GHz 802.11ac VHT20/VHT40/VHT80 Bluetooth BR / EDR / LE Radiation: 868197030033828 D190-xxx-xxx-xxxx V0.0.0.1 Production Unit Remark: The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. 1.3 Product Specification of Equipment Under Test Product Specification subjective to this standard Tx Frequency Rx Frequency Bandwidth Maximum Output Power to Antenna Antenna Gain Type of Modulation 814.7 ~ 823.3 MHz 859.7 ~ 868.3 MHz 1.4MHz / 3MHz / 5MHz / 10MHz / 15MHz 22.73 dBm 0.80 dBi QPSK / 16QAM 1.4 Modification of EUT No modifications are made to the EUT during all test items. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 5 of 21 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FWLTE Version 2.0 FCC RF Test Report Report No. : FW961801 1.5 Maximum Conducted Power, Frequency Tolerance and Emission Designator FCC Rule System Type of Modulation BW Part 90S Part 90S Part 90S Part 90S Part 90S Part 90S Part 90S Part 90S Part 90S Part 90S LTE Band 26 QPSK LTE Band 26 16QAM LTE Band 26 QPSK LTE Band 26 16QAM LTE Band 26 QPSK LTE Band 26 16QAM LTE Band 26 QPSK LTE Band 26 16QAM LTE Band 26 QPSK LTE Band 26 16QAM 1.4 MHz 1.4 MHz 3 MHz 3 MHz 5 MHz 5 MHz 10 MHz 10 MHz 15 MHz 15 MHz Maximum Conducted power(W) 0.1828 0.1875 0.1824 0.1866 0.1816 0.1866 0.1811 0.1871 0.1854 0.1858 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 6 of 21 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FWLTE Version 2.0 FCC RF Test Report 1.6 Testing Site Report No. : FW961801 Sporton International (Shenzhen) Inc. is accredited to ISO/IEC 17025:2017 by American Association for Laboratory Accreditation with Certificate Number 5145.01. Test Firm Sporton International (Shenzhen) Inc. Test Site Location No. 3 Bldg the third floor of south, Shahe River west, Fengzeyuan Warehouse, Nanshan Shenzhen, 518055 Peoples Republic of China TEL: +86-755-33202398 Test Site No. Sporton Site No. FCC Designation No. FCC Test Firm Registration No. 03CH01-SZ CN1256 421272 1.7 Applied Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards:
47 CFR Part 2, 90(S) ANSI C63.26-2015 FCC KDB 971168 D01 Power Meas. License Digital Systems v03r01 FCC KDB 971168 D02 Misc Rev Approv License Devices v02r01 Remark:
1. All test items were verified and recorded according to the standards and without any deviation during the test. 2. This EUT has also been tested and complied with the requirements of FCC Part 15, Subpart B, recorded in a separate test report. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 7 of 21 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FWLTE Version 2.0 FCC RF Test Report Report No. : FW961801 2 Test Configuration of Equipment Under Test 2.1 Test Mode During all testing, EUT is in link mode with base station emulator at maximum power level. The spurious emission measurements were carried out in semi-anechoic chamber with 3-meter test range, and EUT is rotated on three test planes to find out the worst emission. Frequency range investigated for radiated emission is 30 MHz to 9000 MHz. Test Items Band Max. Output Power 26 Radiated Spurious Emission 26 Bandwidth (MHz) Modulation RB #
Test Channel 1.4 v v 3 v v 5 v v 10 15 20 QPSK 16QAM v v v v
-
-
v v v 1 v v Half Full v v L v v M v v H v v 1. The mark v means that this configuration is chosen for testing 2. The mark - means that this bandwidth is not supported. Note 3. LTE Band26 transmit frequency for part22 rule is 824MHz-849MHz, for part90 rule is 814MHz-824MHz. ERP over 15MHz bandwidth complies the ERP limit line of part22 rule, therefore ERP of the partial frequency spectrum which falls within part 22 also complies. 2.2 Connection Diagram of Test System System Simulator Power Source EUT This example is connection diagram of EUT test configurations.
. For detail, please refer to test mode configuration and setup photographs for each test item. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 8 of 21 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FWLTE Version 2.0 FCC RF Test Report Report No. : FW961801 2.3 Support Unit used in test configuration and system Item Equipment Trade Name Model No. FCC ID Data Cable Power Cord 1. LTE Base Station Anritsu CMW500 Fcc DoC N/A Shielded, 1.5m 2.4 Frequency List of Low/Middle/High Channels BW [MHz]
Channel/Frequency(MHz) Lowest Middle Highest LTE Band 26 Channel and Frequency List 15 10 5 3 1.4 Channel Frequency Channel Frequency Channel Frequency Channel Frequency Channel Frequency 26765 821.5
-
-
26715 816.5 26705 815.5 26697 814.7
-
-
26740 819 26740 819 26740 819 26740 819
-
-
-
-
26765 821.5 26775 822.5 26783 823.3 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 9 of 21 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FWLTE Version 2.0 FCC RF Test Report Report No. : FW961801 3 Test Result 3.1 Conducted Output Power Measurement 3.1.1 Description of the Conducted Output Power Measurement A system simulator was used to establish communication with the EUT. Its parameters were set to enforce EUT transmitting at the maximum power. The measured power in the radio frequency on the transmitter output terminals shall be reported. 3.1.2 Measuring Instruments The measuring equipment is listed in the section 4 of this test report. 3.1.3 Test Procedures 1. The transmitter output port was connected to the system simulator. 2. Set EUT at maximum power through the system simulator. 3. Select lowest, middle, and highest channels for each band and different modulation. 4. Measure and record the power level from the system simulator. 3.1.4 Test Setup 3.1.5 Test Result of Conducted Output Power Please refer to Appendix A. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 10 of 21 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FWLTE Version 2.0 FCC RF Test Report Report No. : FW961801 3.2 Field Strength of Spurious Radiation Measurement 3.2.1 Description of Field Strength of Spurious Radiated Measurement The radiated spurious emission was measured by substitution method according to ANSI/TIA-603-E. The power of any emission FCC Part 90.691 on any frequency removed from the assigned frequency by more than 250 percent of the authorized bandwidth at least 43 + 10 log (P) dB. The spectrum is scanned from 30 MHz up to a frequency including its 10th harmonic. The power of any emission outside of the authorized operating frequency ranges must be attenuated below the transmitter power (P) by a factor of at least 43+10log10(P[Watts]) dB. The spectrum is scanned from 30 MHz up to a frequency including its 10th harmonic. 3.2.2 Measuring Instruments The measuring equipment is listed in the section 4 of this test report. 3.2.3 Test Procedures 1. The EUT was placed on a turntable with 0.8 meter for frequency below 1GHz and 1.5 meter for frequency above 1GHz respectively above ground. 2. The EUT was set 3 meters from the receiving antenna, which was mounted on the antenna tower. 3. 4. The table was rotated 360 degrees to determine the position of the highest spurious emission. The height of the receiving antenna is varied between one meter and four meters to search the maximum spurious emission for both horizontal and vertical polarizations. 5. Make the measurement with the spectrum analyzer's RBW = 1MHz, VBW = 3MHz, Sweep =
500ms, Taking the record of maximum spurious emission. 6. A horn antenna was substituted in place of the EUT and was driven by a signal generator. 7. Tune the output power of signal generator to the same emission level with EUT maximum spurious emission. 8. Taking the record of output power at antenna port. 9. Repeat step 7 to step 8 for another polarization. 10. EIRP (dBm) = S.G. Power Tx Cable Loss + Tx Antenna Gain 11. ERP (dBm) = EIRP - 2.15 12. The RF fundamental frequency should be excluded against the limit line in the operating frequency band. 13. The limit line is derived from 43 + 10log(P) dB below the transmitter power P(Watts) Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 11 of 21 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FWLTE Version 2.0 FCC RF Test Report 3.2.4 Test Setup For radiated test from 30MHz to 1GHz Report No. : FW961801 For radiated test above 1GHz 3.2.5 Test Result of Field Strength of Spurious Radiated Please refer to Appendix B. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 12 of 21 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FWLTE Version 2.0 FCC RF Test Report 4 List of Measuring Equipment Report No. : FW961801 Instrument Manufacturer Model No. Serial No. Characteristics Calibration Date Test Date Due Date Remark EMI Test Receiver&SA Agilent N9038A MY52260185 20Hz~26.5GHz Aug. 30, 2018 Jun. 25, 2019 Aug. 29, 2019 HF Amplifier KEYSIGHT 83017A MY53270104 0.5GHz~26.5Ghz Dec. 22, 2018 Jun. 25, 2019 Dec. 21, 2019 Bilog Antenna TeseQ CBL6112D 35407 30MHz-2GHz Jun. 05, 2019 Jun. 25, 2019 Jun. 04, 2020 Double Ridge Horn Antenna ETS Lindgren 3117 119436 1GHz~18GHz Jun. 28, 2018 Jun. 25, 2019 Jun. 27, 2019 SHF-EHF Horn com-power AH-840 101071 18Ghz-40GHz Mar. 30, 2019 Jun. 25, 2019 Mar. 29, 2020 LF Amplifier Burgeon BPA-530 102209 0.01~3000Mhz Apr. 19, 2019 Jun. 25, 2019 Apr. 18, 2020 HF Amplifier MITEQ HF Amplifier MITEQ AMF-7D-00 101800-30-1 0P-R TTA1840-35
-HG 1707137 1GHz~18GHz Oct. 19, 2018 Jun. 25, 2019 Oct. 18, 2019 1871923 18GHz~40GHz Jul. 17, 2018 Jun. 25, 2019 Jul. 16, 2019 AC Power Source Chroma 61601 616010001985 N/A NCR Jun. 25, 2019 NCR Turn Table EM EM1000 N/A 0~360 degree NCR Jun. 25, 2019 NCR Radiation
(03CH01-SZ) Radiation
(03CH01-SZ Radiation
(03CH01-SZ) Radiation
(03CH01-SZ) Radiation
(03CH01-SZ) Radiation
(03CH01-SZ) Radiation
(03CH01-SZ) Radiation
(03CH01-SZ) Radiation
(03CH01-SZ) Radiation
(03CH01-SZ) NCR: No Calibration Required Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 13 of 21 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FWLTE Version 2.0 FCC RF Test Report 5 Uncertainty of Evaluation Report No. : FW961801 The measurement uncertainties shown below were calculated in accordance with the requirements of ANSI 63.26-2015. All the measurement uncertainty value were shown with a coverage K=2 to indicate 95% level of confidence. The measurement data show herein meets or exceeds the CISPR measurement uncertainty values specified in CISPR 16-4-2 and can be compared directly to specified limit to determine compliance. Uncertainty of Radiated Emission Measurement (30 MHz ~ 1000 MHz) Measuring Uncertainty for a Level of Confidence of 95% (U = 2Uc(y)) Uncertainty of Radiated Emission Measurement (1 GHz ~ 18 GHz) Measuring Uncertainty for a Level of Confidence of 95% (U = 2Uc(y)) Uncertainty of Radiated Emission Measurement (18 GHz ~ 40 GHz) Measuring Uncertainty for a Level of Confidence of 95% (U = 2Uc(y)) 2.5dB 3.5dB 4.0dB Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: 14 of 21 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FWLTE Version 2.0 FCC RF Test Report Report No. : FW961801 Appendix A. Test Results of Conducted Test Conducted Output Power (Average power) LTE Band 26 Maximum Average Power [dBm]
Index BW [MHz]
Mod RB Size RB Offset Lowest Middle Highest L M H 22.68 22.50 22.61 22.46 22.45 22.69 22.65 22.51 22.47 22.56
-
15 15 15 15 15 15 15 15 15 15 10 10 10 10 10 10 10 10 10 10 QPSK 16-QAM QPSK 16-QAM 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 11 11 11 11 11 11 11 11 11 11 7 7 7 7 7 7 7 7 7 7
-
-
22.51 22.41 22.58 22.50 21.91 22.61 22.72 22.42 22.54 21.26
-
Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: A1 of A2 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FWLTE Version 2.0 FCC RF Test Report Report No. : FW961801 LTE Band 26 Maximum Average Power [dBm]
Index BW [MHz]
Mod RB Size RB Offset Lowest Middle Highest L M H 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 3 3 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 QPSK 16-QAM QPSK 16-QAM QPSK 16-QAM 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 5 0 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 22.47 22.40 22.59 22.40 22.43 22.65 22.55 22.51 22.47 22.46 22.40 22.42 22.58 22.38 22.42 22.59 22.62 22.42 22.48 22.57 22.44 22.43 22.56 22.39 22.42 22.62 22.61 22.46 22.41 22.53 22.44 22.41 21.85 21.90 21.78 22.63 22.71 21.83 21.81 21.64 22.49 22.35 22.61 22.48 22.48 22.71 22.68 22.54 22.28 22.59 22.48 22.35 22.62 22.54 22.41 22.73 22.69 22.57 22.36 22.50 22.36 22.24 21.75 21.73 21.72 22.67 22.63 21.74 21.72 21.31 22.34 22.37 22.37 22.29 22.29 22.53 22.54 22.32 22.26 22.44 22.32 22.37 22.44 22.24 22.28 22.58 22.51 22.24 22.27 22.44 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: A2 of A2 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FWLTE Version 2.0 FCC RF Test Report Report No. : FW961801 Appendix B. Test Results of Radiated Test Radiated Spurious Emission LTE Band 26 / 1.4MHz / QPSK Channel Frequency EIRP Limit
( MHz )
( dBm )
( dBm ) 1628.14 2442.21 3256.28 1632 2442.21 3256.28 1636.74 2455.11 3273.48 1636.74 2455.11 3273.48 1645.34 2468.01 3290.68 1645.34 2468.01 3290.68
-66.87
-60.52
-58.83
-65.97
-59.85
-57.49
-66.62
-60.43
-58.98
-66.02
-60.24
-58.01
-66.98
-60.20
-59.14
-66.32
-60.12
-58.16
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13 Lowest Middle Highest Over Limit
( dB )
-53.87
-47.52
-45.83
-52.97
-46.85
-44.49
-53.62
-47.43
-45.98
-53.02
-47.24
-45.01
-53.98
-47.20
-46.14
-53.32
-47.12
-45.16 SPA S.G. TX Cable Reading
(dBm) Power
( dBm ) loss
( dB )
-77.56
-78.59
-78.95
-77.26
-78.36
-78.88
-77.31
-78.63
-79.19
-77.31
-78.83
-79.31
-77.73
-78.40
-79.45
-77.71
-78.71
-79.36
-70.10
-64.07
-63.76
-69.20
-63.40
-62.42
-69.87
-64.00
-63.91
-69.27
-63.81
-62.94
-70.15
-63.78
-64.06
-69.49
-63.70
-63.08 3.98 4.85 5.50 3.98 4.85 5.50 4.00 4.88 5.52 4.00 4.88 5.52 4.10 4.90 5.55 4.10 4.90 5.55 Remark: Spurious emissions within 30-1000MHz were found more than 20dB below limit line. TX Antenna Polarization Gain
(dBi) 9.36 10.55 12.58 9.36 10.55 12.58 9.40 10.60 12.60 9.40 10.60 12.60 9.42 10.63 12.62 9.42 10.63 12.62
(H/V) H H H V V V H H H V V V H H H V V V Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: B1 of B3 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FWLTE Version 2.0 FCC RF Test Report Report No. : FW961801 Channel Frequency EIRP Limit
( MHz )
( dBm )
( dBm ) 1628.3 2442.45 3256.6 1628.3 2442.45 3256.6 1635.3 2452.95 3270.6 1635.3 2452.95 3270.6 1642.3 2463.45 3284.6 1642.3 2463.45 3284.6
-67.01
-60.36
-59.05
-66.51
-60.00
-58.14
-67.03
-60.24
-59.01
-66.36
-60.12
-57.86
-66.91
-60.56
-58.72
-66.25
-60.30
-57.88
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13 Lowest Middle Highest LTE Band 26 / 3MHz / QPSK Over Limit
( dB )
-54.01
-47.36
-46.05
-53.51
-47.00
-45.14
-54.03
-47.24
-46.01
-53.36
-47.12
-44.86
-53.91
-47.56
-45.72
-53.25
-47.30
-44.88 SPA S.G. TX Cable Reading
(dBm) Power
( dBm ) loss
( dB )
-77.70
-78.43
-79.17
-77.80
-78.51
-79.53
-77.72
-78.31
-79.22
-77.65
-78.63
-79.16
-77.66
-78.76
-78.93
-77.64
-78.89
-79.18
-70.24
-63.91
-63.98
-69.74
-63.55
-63.07
-70.28
-63.81
-63.94
-69.61
-63.69
-62.79
-70.08
-64.14
-63.64
-69.42
-63.88
-62.80 3.98 4.85 5.50 3.98 4.85 5.50 4.00 4.88 5.52 4.00 4.88 5.52 4.10 4.90 5.55 4.10 4.90 5.55 Remark: Spurious emissions within 30-1000MHz were found more than 20dB below limit line. TX Antenna Polarization Gain
(dBi) 9.36 10.55 12.58 9.36 10.55 12.58 9.40 10.60 12.60 9.40 10.60 12.60 9.42 10.63 12.62 9.42 10.63 12.62
(H/V) H H H V V V H H H V V V H H H V V V Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: B2 of B3 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FWLTE Version 2.0 FCC RF Test Report Report No. : FW961801 Channel Frequency EIRP Limit
( MHz )
( dBm )
( dBm ) 1628.5 2442.75 3257 1628.5 2442.75 3257 1633.5 2450.25 3267 1633.5 2450.25 3267 1638.5 2457.75 3277 1638.5 2457.75 3277
-66.91
-60.51
-59.30
-66.17
-59.80
-57.71
-66.76
-60.84
-59.35
-66.52
-60.09
-58.24
-65.49
-60.66
-59.18
-66.20
-59.88
-57.95
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13 Lowest Middle Highest LTE Band 26 / 5MHz / QPSK Over Limit
( dB )
-53.91
-47.51
-46.30
-53.17
-46.80
-44.71
-53.76
-47.84
-46.35
-53.52
-47.09
-45.24
-52.49
-47.66
-46.18
-53.20
-46.88
-44.95 SPA S.G. TX Cable Reading
(dBm) Power
( dBm ) loss
( dB )
-77.60
-78.58
-79.42
-77.46
-78.31
-79.10
-77.45
-78.91
-79.47
-77.81
-78.60
-79.63
-76.24
-78.86
-79.39
-77.59
-78.47
-79.25
-70.14
-64.06
-64.23
-69.40
-63.35
-62.64
-70.01
-64.41
-64.28
-69.77
-63.66
-63.17
-68.66
-64.24
-64.10
-69.37
-63.46
-62.87 3.98 4.85 5.50 3.98 4.85 5.50 4.00 4.88 5.52 4.00 4.88 5.52 4.10 4.90 5.55 4.10 4.90 5.55 Remark: Spurious emissions within 30-1000MHz were found more than 20dB below limit line. Channel Frequency EIRP Limit
( MHz )
( dBm )
( dBm ) 1629 2443.5 3258 1629 2443.5 3258
-66.98
-60.65
-58.64
-65.37
-60.17
-58.10
-13
-13
-13
-13
-13
-13 Middle LTE Band 26 / 10MHz / QPSK Over Limit
( dB )
-53.98
-47.65
-45.64
-52.37
-47.17
-45.10 SPA S.G. TX Cable Reading
(dBm) Power
( dBm )
-77.67
-78.72
-78.76
-76.66
-78.68
-79.49
-70.23
-64.22
-63.57
-68.62
-63.74
-63.03 loss
( dB ) 4.00 4.88 5.52 4.00 4.88 5.52 Remark: Spurious emissions within 30-1000MHz were found more than 20dB below limit line. TX Antenna Polarization Gain
(dBi) 9.36 10.55 12.58 9.36 10.55 12.58 9.40 10.60 12.60 9.40 10.60 12.60 9.42 10.63 12.62 9.42 10.63 12.62 Gain
(dBi) 9.40 10.60 12.60 9.40 10.60 12.60
(H/V) H H H V V V H H H V V V H H H V V V
(H/V) H H H V V V TX Antenna Polarization Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID : V5PD190LTE Page Number
: B3 of B3 Report Issued Date : Jul. 29, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FWLTE Version 2.0
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2019-08-05 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
| 2 | 829 ~ 844 | PCB - PCS Licensed Transmitter | ||
| 3 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 4 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | ||
| 5 | 13.56 ~ 13.56 | DXX - Part 15 Low Power Communication Device Transmitter |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 2 3 4 5 | Effective |
2019-08-05
|
||||
| 1 2 3 4 5 | Applicant's complete, legal business name |
PAX Technology Limited
|
||||
| 1 2 3 4 5 | FCC Registration Number (FRN) |
0010188456
|
||||
| 1 2 3 4 5 | Physical Address |
Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour
|
||||
| 1 2 3 4 5 |
Hong Kong, N/A
|
|||||
| 1 2 3 4 5 |
China
|
|||||
| app s | TCB Information | |||||
| 1 2 3 4 5 | TCB Application Email Address |
s******@nemko.com
|
||||
| 1 2 3 4 5 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
| 1 2 3 4 5 |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|||||
| 1 2 3 4 5 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
| app s | FCC ID | |||||
| 1 2 3 4 5 | Grantee Code |
V5P
|
||||
| 1 2 3 4 5 | Equipment Product Code |
D190LTE
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 2 3 4 5 | Name |
J******** T********
|
||||
| 1 2 3 4 5 | Telephone Number |
86-75********
|
||||
| 1 2 3 4 5 | Fax Number |
86-75********
|
||||
| 1 2 3 4 5 |
c******@paxsz.com
|
|||||
| app s | Technical Contact | |||||
| n/a | ||||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 2 3 4 5 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 2 3 4 5 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 2 3 4 5 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 02/01/2020 | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 2 3 4 5 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 2 3 4 5 | Equipment Class | DTS - Digital Transmission System | ||||
| 1 2 3 4 5 | PCB - PCS Licensed Transmitter | |||||
| 1 2 3 4 5 | DSS - Part 15 Spread Spectrum Transmitter | |||||
| 1 2 3 4 5 | NII - Unlicensed National Information Infrastructure TX | |||||
| 1 2 3 4 5 | DXX - Part 15 Low Power Communication Device Transmitter | |||||
| 1 2 3 4 5 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Mobile Payment Terminal | ||||
| 1 2 3 4 5 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 2 3 4 5 | Modular Equipment Type | Does not apply | ||||
| 1 2 3 4 5 | Purpose / Application is for | Original Equipment | ||||
| 1 2 3 4 5 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
| 1 2 3 4 5 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 2 3 4 5 | Grant Comments | Output power listed is conducted. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.18 W/kg and 1.20 W/kg, respectively. | ||||
| 1 2 3 4 5 | Power output listed is ERP for Part 22 and Part 27 below 1 GHz, EIRP for Part 24 and Part 27 above 1 GHz, and conducted for Part 90 operations. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.07 W/kg and 1.59 W/kg, respectively. | |||||
| 1 2 3 4 5 | Output power listed is conducted. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are < 0.10 W/kg and 1.07 W/kg, respectively. | |||||
| 1 2 3 4 5 | Output power listed is conducted. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.09 W/kg and 1.59 W/kg, respectively. | |||||
| 1 2 3 4 5 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 2 3 4 5 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 2 3 4 5 | Firm Name |
Sporton International (Shenzhen) Inc.
|
||||
| 1 2 3 4 5 | Name |
I******** H********
|
||||
| 1 2 3 4 5 | Telephone Number |
+86 0********
|
||||
| 1 2 3 4 5 |
I******@sporton-lab.com
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15C | CC | 2402 | 2480 | 0.0023 | |||||||||||||||||||||||||||||||||||
| 1 | 2 | 15C | CC | 2412 | 2462 | 0.0407 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 2 | 1 | 22H | 824.2 | 848.8 | 0.877 | 0.1 ppm | 246KGXW | ||||||||||||||||||||||||||||||||||
| 2 | 2 | 22H | 824.2 | 848.8 | 0.3027 | 0.1 ppm | 246KG7W | ||||||||||||||||||||||||||||||||||
| 2 | 3 | 24E | 1850.2 | 1909.8 | 0.7998 | 0.1 ppm | 246KGXW | ||||||||||||||||||||||||||||||||||
| 2 | 4 | 24E | 1850.2 | 1909.8 | 0.3606 | 0.1 ppm | 245KG7W | ||||||||||||||||||||||||||||||||||
| 2 | 5 | 24E | 1860 | 1900 | 0.2388 | 0.1 ppm | 1M11G7D | ||||||||||||||||||||||||||||||||||
| 2 | 6 | 24E | 1860 | 1900 | 0.2366 | 0.1 ppm | 1M13W7D | ||||||||||||||||||||||||||||||||||
| 2 | 7 | 27 | 1720 | 1745 | 0.2291 | 0.1 ppm | 1M11G7D | ||||||||||||||||||||||||||||||||||
| 2 | 8 | 27 | 1720 | 1745 | 0.2286 | 0.1 ppm | 1M12W7D | ||||||||||||||||||||||||||||||||||
| 2 | 9 | 22H | 829 | 844 | 0.1321 | 0.1 ppm | 1M12G7D | ||||||||||||||||||||||||||||||||||
| 2 | 1 | 22H | 829 | 844 | 0.1365 | 0.1 ppm | 1M11W7D | ||||||||||||||||||||||||||||||||||
| 2 | 11 | 22H | 824.7 | 848.3 | 0.1334 | 0.1 ppm | 1M12G7D | ||||||||||||||||||||||||||||||||||
| 2 | 12 | 22H | 824.7 | 848.3 | 0.1368 | 0.1 ppm | 1M11W7D | ||||||||||||||||||||||||||||||||||
| 2 | 13 | 27 | 704 | 711 | 0.1306 | 0.1 ppm | 1M11G7D | ||||||||||||||||||||||||||||||||||
| 2 | 14 | 27 | 704 | 711 | 0.1303 | 0.1 ppm | 1M11W7D | ||||||||||||||||||||||||||||||||||
| 2 | 15 | 27 | 782 | 782 | 0.1416 | 0.1 ppm | 1M10G7D | ||||||||||||||||||||||||||||||||||
| 2 | 16 | 27 | 782 | 782 | 0.1396 | 0.1 ppm | 1M11W7D | ||||||||||||||||||||||||||||||||||
| 2 | 17 | 27 | 779.5 | 784.5 | 0.1413 | 0.1 ppm | 1M11W7D | ||||||||||||||||||||||||||||||||||
| 2 | 18 | 22H | 831.5 | 841.5 | 0.1393 | 0.1 ppm | 1M12G7D | ||||||||||||||||||||||||||||||||||
| 2 | 19 | 22H | 831.5 | 841.5 | 0.139 | 0.1 ppm | 1M11W7D | ||||||||||||||||||||||||||||||||||
| 2 | 2 | 9 | 821.5 | 821.5 | 0.1854 | 0.1 ppm | 1M10G7D | ||||||||||||||||||||||||||||||||||
| 2 | 21 | 9 | 821.5 | 821.5 | 0.1858 | 0.1 ppm | 1M11W7D | ||||||||||||||||||||||||||||||||||
| 2 | 22 | 9 | 814.7 | 823.3 | 0.1875 | 0.1 ppm | 1M11W7D | ||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 3 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0046000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 4 | 1 | 15E | CC | 5180 | 5240 | 0.0356 | |||||||||||||||||||||||||||||||||||
| 4 | 2 | 15E | CC | 5260 | 5320 | 0.0325 | |||||||||||||||||||||||||||||||||||
| 4 | 3 | 15E | CC | 5500 | 5720 | 0.0355 | |||||||||||||||||||||||||||||||||||
| 4 | 4 | 15E | CC | 5745 | 5825 | 0.033 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 5 | 1 | 15C | CC | 13.56000000 | 13.56000000 | ||||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC