FCC ID: V5PSP30RF21 PIN PAD

PAX TECHNOLOGY LIMITED PINPAD Instruction Manual

(SP30) 1. Instructions PINPAD connect to POS or ECR by a communication line for entering password during transaction process. In order to correct using, you should refer to following instructions. 1Magnetic Stripe Card Put magnetic stripe side of magnetic card towards device interior, swipe the card with a steady speed during through magnetic reader slot. (Support bi-directional swiping) 2IC Card 4SAM Card Put IC card chip side upward, push-in IC card slot and to bottom. 3Tap contactless card (optional). Put the contactless card into the sensing area above the LCD Remove the SAM card cover (At the bottom of the terminal). Insert the SAM card to the corresponding card slot. 2. Installation and Usage Tips 1Avoid putting the terminal in direct sunlight, high temperature, moist, or dusty environment. 2Forbid non-professional to repair the terminal. 3Before insert the card, please check internal and around of IC card slot . when you found some suspicious objects , must report to related administrator. 3. Password Entering Tips:

It is highly recommended to enter password as following ways:

1Set up peep shields. Enter password with shield by the structures of cashier desk;

2Place the POS terminal at an appropriate angle and make sure it is difficult to peer the password. For example, the POS was installed above the movable bracket. 3In enter password perspective, avoid surrounding video surveillance;

4Paste text instructions to remind the customers to shelter with body or palm when enter password. 5Merchants can also choose other ways to protect the customer input password. PAX TECHNOLOGY LIMITED To know more product details, please visit http://www.pax.com.cn P/N:200312000000199 Caution:

This device complies with Part 15 of the FCC rules and Industry Canada licenseexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment. Such modifications or change could void the users authority to operate the equipment. This radio transmitter (identify the device by certification number or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Dn. FE @>

Model : SP30 us Rating: 5.0V===1.0A FCCID : VS5PSP30RF21 PAX Computer Technology (Shenzhen) Co.,Ltd. Madein China TTA TT CPD) TLL NO Ong HH UT NT TA OF 02 OF Oy OS 09 OL 0B 060} OF CS CCS A AR Pe ee a a AIRE TLIN COLSON 7 vat tnaagatvii utvlvaycoaalytataoigivblitya

PAX Technology Limited Date: Nov. 25, 2021 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: V5PSP30RF21 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Schematics Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, PAX Technology Limited File Name Schematics.pdf Block Diagram.pdf Operational Description.pdf Signature Jenna Tan / Certification Leader Typed name and Title

PAX Technology Limited Date: 2021-11-25 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: V5PSP30RF21 To Whom It May Concern:

This letter is to statement that SP30 / PIN PAD. has been tested according to FCC Part 15B by Waltek Testing Group Co., Ltd. (Test Report No.: WTD21D11128906E). And the SDOC file, meetting the requirements of the FCC regulations, would been provided when the device is sold by the responsible party in US. The service will not be sold until the SDOC is provided. If the sale does not have an SDOC, all responsibility is the responsibility of the applicant. Sincerely, Signature

[Jenna Tan]

[Certification Leader]

[PAX Technology Limited]

PAX Technology Limited FCC ID: V5PSP30RF21 POWER OF ATTORNEY Date: Nov. 25, 2021 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern:

We, the undersigned, hereby authorize Waltek Testing Group Co., Ltd. (Philo Zhong) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group Co., Ltd. (Philo Zhong) on our behalf shall have the same effect as acts of our own. This authorization expires on Nov. 24, 2022. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, PAX Technology Limited are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, PAX Technology Limited Signature Jenna Tan / Certification Leader Typed name and Title