| submitted | available | document details (if available) | source link |
|---|---|---|---|
| August 02 2019 | August 05 2019 | HD 271 S1 LAB02 Microsoft® Word 2016 |
| various | Reference test report part 1 | Test Report | 1.02 MiB | August 02 2019 / August 05 2019 |
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053
+86 (0) 755 2671 0594 Fax:
Email:
ee.shenzhen@sgs.com Report No.: SZEM180400321702 Page: 1 of 31 FCC TEST REPORT Application No:
SZEM1804003217RG Applicant:
Address of Applicant Manufacturer:
Address of Manufacturer Factory:
Address of Factory:
Product Name:
Model No.(EUT):
Trade Mark:
FCC ID:
Standards:
Fibocom Wireless Inc. 5/F, Tower A, Technology Building II, 1057 Nanhai Avenue, Shenzhen, China Fibocom Wireless Inc. 5/F, Tower A, Technology Building II, 1057 Nanhai Avenue, Shenzhen, China Shenzhen Eternity Technology Co., Ltd 1F, 2F, 4F Building A2, Yingzhan Industrial Zone, Longtian Community, Longtian Road, Pingshan District, Shenzhen, Guangdong Province, P.R. China LTE (CatM1,NB-IOT) Module M910-GL Fibocom ZMOM910GL 47 CFR Part 2 47 CFR Part 22 subpart H 47 CFR Part 24 subpart E 47 CFR Part 27 subpart C Test Method:
47 CFR Part 90 subpart S FCC KDB 971168 D01 Power Meas License Digital Systems V03r01 TIA-603-E 2016 Date of Receipt:
2018-06-21 Date of Test:
Date of Issue:
Test Result:
2018-06-25 to 2018-08-05 2018-08-08 PASS *
* In the configuration tested, the EUT detailed in this report complied with the standards specified above. Authorized Signature:
Derek Yang Wireless Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 2 of 31 1 Version Version Chapter Date Modifier Revision Record 01 2018-08-08 Remark Original 2018-08-08 Date 2018-08-08
(Mike Hu) /Project Engineer
(David Chen) /Reviewer Date Authorized for issue by:
Tested By Checked By This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 3 of 31 Content Page 1 VERSION 2 TEST SUMMARY 2.1 2.2 2.3 2.4 2.5 2.6 GSM850/ LTE BAND 5/26 (824-849 MHZ) GSM1900/LTE BAND 2 (1850-1915 MHZ) LTE BAND 4 (1710-1780 MHZ) LTE BAND 12 (699-716MHZ) LTE BAND 13 (777-787MHZ) LTE BAND 26 (814-824 MHZ) 3 GENERAL INFORMATION 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 CLIENT INFORMATION GENERAL DESCRIPTION OF EUT TEST MODE FREQUENCY LIST OF LOW/MIDDLE/HIGH CHANNELS TEST ENVIRONMENT TEST LOCATION TEST FACILITY DEVIATION FROM STANDARDS ABNORMALITIES FROM STANDARD CONDITIONS 3.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER 3.11 TECHNICAL SPECIFICATION 4 DESCRIPTION OF TESTS 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 CONDUCTED OUTPUT POWER EFFECTIVE (ISOTROPIC) RADIATED POWER OF TRANSMITTER OCCUPIED BANDWIDTH BAND EDGE AT ANTENNA TERMINALS SPURIOUS AND HARMONIC EMISSIONS AT ANTENNA TERMINAL PEAK-AVERAGE RATIO FIELD STRENGTH OF SPURIOUS RADIATION FREQUENCY STABILITY / TEMPERATURE VARIATION TEST SETUPS 4.9.1 Test Setup 1 2 5 5 5 6 6 7 9 10 10 10 10 11 16 16 16 17 17 17 17 19 19 19 20 21 21 22 22 23 25 25 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 4 of 31 4.9.2 Test Setup 2 4.9.3 Test Setup 3 4.9.4 Test Setup 4 4.10 TEST CONDITIONS 5 MAIN TEST INSTRUMENTS 6 MEASUREMENT UNCERTAINTY 7 PHOTOGRAPHS - EUT CONSTRUCTIONAL DETAILS 25 26 26 27 29 31 31 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 5 of 31 2 Test Summary 2.1 GSM850/ LTE BAND 5/26 (824-849 MHz) Requirements Test Result Verdict Test Item Effective
(Isotropic) Radiated Power Output Data Peak-Average Ratio Modulation Characteristics FCC Rule No. 2.1046, 22.913 ERP 7 W
---
Limit13 dB 2.1047 Digital modulation Section 1 of Appendix B Pass Section 2 of Appendix B Section 3 of Appendix B Section 4 of Appendix B Section 5 of Appendix B Pass Pass Pass Pass OBW: No limit. EBW: No limit.
-13 dBm/1%*EBW, in 1 MHz bands immediately outside and adjacent to the frequency block. FCC: -13 dBm/100 kHz, from 9 kHz to 10th harmonics but outside authorized operating frequency ranges. Section 6 of Appendix B Pass FCC: -13 dBm/100 kHz. 2.5ppm. Section 7 of Appendix B Section 8 of Appendix B Pass Pass NOTE: For the verdict, the N/A denotes not applicable, the N/T denotes not tested. 2.2 GSM1900/LTE BAND 2 (1850-1915 MHz) FCC Rule No. Requirements Test Result Verdict EIRP 2 W Limit13 dB Digital modulation OBW: No limit. EBW: No limit.
-13 dBm/1%*EBW, in 1 MHz bands immediately outside and adjacent to the frequency block. Section 1 of Appendix B Pass Section 2 of Appendix B Section 3 of Appendix B Section 4 of Appendix B Section 5 of Appendix B Pass Pass Pass Pass
-13 dBm/1 MHz, from 9 kHz to 10th harmonics but outside authorized operating frequency ranges. Section 6 of Appendix B Pass This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Bandwidth 2.1049 Band Edges Compliance Spurious Emission at Antenna Terminals Field Strength of Spurious Radiation Frequency Stability 2.1051, 22.917 2.1051, 22.917 2.1053, 22.917 2.1055, 22.355 Test Item Effective
(Isotropic) Radiated Power Output Data Peak-Average Ratio Modulation Characteristics 2.1046, 24.232 2.1046, 24.232 2.1047 Bandwidth 2.1049 Band Edges Compliance Spurious Emission at Antenna Terminals 2.1051, 24.238 2.1051, 24.238 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 6 of 31 Test Item FCC Rule No. Requirements Test Result Verdict Field Strength of Spurious Radiation Frequency Stability 2.1053, 24.238 2.1055, 24.235
-13 dBm/1 MHz. 2.5 ppm. Section 7 of Appendix B Section 8 of Appendix B Pass Pass NOTE: For the verdict, the N/A denotes not applicable, the N/T denotes not tested. 2.3 LTE BAND 4 (1710-1780 MHz) FCC Rule No. Requirements Test Result Verdict Test Item Effective
(Isotropic) Radiated Power Output Data Peak-Average Ratio Modulation Characteristics 2.1046, 27.50(d) 2.1046, 27.50(d) 2.1047 Bandwidth 2.1049 Band Edges Compliance Spurious Emission at Antenna Terminals Field Strength of Spurious Radiation Frequency Stability 2.1051, 27.53(h) 2.1051, 27.53(h) 2.1053, 27.53(h) 2.1055, 27.54 Test Item Effective
(Isotropic) Radiated Power Output Data Peak-Average Ratio Modulation Characteristics 2.1046, 27.50(c) 2.1047 Bandwidth 2.1049 Band Edges Compliance Spurious Emission at 2.1051, 27.53(g) 2.1051, 27.53(g) EIRP 1 W Limit13 dB Digital modulation OBW: No limit. EBW: No limit.
-13 dBm/1%*EBW, in 1 MHz bands immediately outside and adjacent to the frequency block. Section 1 of Appendix B Pass Section 2 of Appendix B Section 3 of Appendix B Section 4 of Appendix B Section 5 of Appendix B Pass Pass Pass Pass
-13 dBm/1 MHz, from 9 kHz to 10th harmonics but outside authorized operating frequency ranges. Section 6 of Appendix B Pass
-13 dBm/1 MHz. 2.5 ppm. Section 7 of Appendix B Section 8 of Appendix B Pass Pass NOTE: For the verdict, the N/A denotes not applicable, the N/T denotes not tested. 2.4 LTE BAND 12 (699-716MHz) FCC Rule No Requirements Test Result Verdict 27.50(c) FCC: ERP 3 W. Section 1 of Appendix B Pass Limit13 dB Digital modulation OBW: No limit. EBW: No limit.
-13 dBm/1%*EBW, in 1 MHz bands immediately outside and adjacent to the frequency block. Section 2 of Appendix B Section 3 of Appendix B Section 4 of Appendix B Section 5 of Appendix B FCC: -13 dBm/100 kHz, from 9 kHz to 10th harmonics but outside authorized operating Section 6 of Appendix B Pass Pass Pass Pass Pass This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Test Item Antenna Terminals Field Strength of Spurious Radiation Frequency Stability SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 7 of 31 FCC Rule No Requirements frequency ranges. Test Result Verdict 2.1053, 27.53(g) 2.1055, 27.54 FCC: -13 dBm/100 kHz. 2.5ppm. Section 7 of Appendix B Section 8 of Appendix B Pass Pass NOTE: For the verdict, the N/A denotes not applicable, the N/T denotes not tested. 2.5 LTE BAND 13 (777-787MHz) FCC Rule No. Requirements Test Result Verdict Test Item Effective
(Isotropic) Radiated Power Output Data Peak-Average Ratio Modulation Characteristics 2.1046, 27.50(b) 27.50 2.1047 Bandwidth 2.1049, Band Edges Compliance 2.1051, 27.53(c) Section 1 of Appendix B Pass Section 2 of Appendix B Section 3 of Appendix B Section 4 of Appendix B Section 5 of Appendix B N/T Pass Pass Pass FCC: ERP 3 W. Limit13 dB Digital modulation OBW: No limit. EBW: No limit.
-13 dBm/1%*EBW, in 1 MHz bands immediately outside and adjacent to the frequency block.
-13 dBm/100 kHz, from 9 kHz to 10th harmonics but outside authorized operating frequency ranges.
(c) For operations in the 746-758 MHz band and the 776-788 MHz band, the power of any emission outside the licensee's frequency band(s) of operation shall be attenuated below the transmitter power (P) within the licensed band(s) of operation, measured in watts, in accordance with the following:
Spurious Emission at Antenna Terminals 2.1051, 27.53(c) 27.53(f)
(1) On any frequency outside the 746-
758 MHz band, the power of any emission shall be attenuated outside the band below the transmitter power (P) by at least 43 + 10 Section 6 of Appendix B Pass log (P) dB;
(2) On any frequency outside the 776-
788 MHz band, the power of any emission shall be attenuated outside the band below the transmitter power (P) by at least 43 + 10 log (P) dB;
(3) On all frequencies between 763-
775 MHz and 793-805 MHz, by a factor not less than 76 + 10 log (P) dB in a 6.25 kHz band segment, for base and fixed stations;
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 8 of 31 Test Item FCC Rule No. Requirements Test Result Verdict
(4) On all frequencies between 763-775 MHz and 793-805 MHz, by a factor not less than 65 + 10 log (P) dB in a 6.25 kHz band segment, for mobile and portable stations;
For operations in the 746-758 MHz, 775-
788 MHz, and 805-806 MHz bands, emissions in the band 1559-1610 MHz shall be limited to 70 dBW/MHz equivalent isotropically radiated power (EIRP) for wideband signals, and 80 dBW EIRP for discrete emissions of less than 700 Hz bandwidth. FCC: -13 dBm/100 kHz.
(c) For operations in the 746-758 MHz band and the 776-788 MHz band, the power of any emission outside the licensee's frequency band(s) of operation shall be attenuated below the transmitter power (P) within the licensed band(s) of operation, measured in watts, in accordance with the following:
(1) On any frequency outside the 746-
758 MHz band, the power of any emission shall be attenuated outside the band below the transmitter power (P) by at least 43 + 10 log (P) dB;
(2) On any frequency outside the 776-
788 MHz band, the power of any emission shall be attenuated outside the band below the transmitter power (P) by at least 43 + 10 log (P) dB;
(3) On all frequencies between 763-
775 MHz and 793-805 MHz, by a factor not less than 76 + 10 log (P) dB in a 6.25 kHz band segment, for base and fixed stations;
(4) On all frequencies between 763-775 MHz and 793-805 MHz, by a factor not less than 65 + 10 log (P) dB in a 6.25 kHz band segment, for mobile and portable stations;
For operations in the 746-758 MHz, 775-
788 MHz, and 805-806 MHz bands, emissions in the band 1559-1610 MHz shall be limited to 70 dBW/MHz equivalent isotropically radiated power (EIRP) for wideband signals, and 80 dBW EIRP for discrete emissions of less than 700 Hz bandwidth. Section 7 of Appendix B Pass Field Strength of Spurious Radiation 2.1053, 27.53(c) 27.53(f) Frequency Stability 2.1055, 27.54 Within authorized bands of operation/frequency block. Section 8 of Appendix B Pass NOTE: For the verdict, the N/A denotes not applicable, the N/T denotes not tested. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 9 of 31 2.6 LTE BAND 26 (814-824 MHz) Requirements Test Result Verdict Test Item Transmitter Conducted Power Output Peak-Average Ratio Modulation Characteristics FCC Rule No. 2.1046, 90.635
< 100 W.
---
FCC: Limit13 dB 2.1047 Digital modulation Bandwidth 2.1049 OBW: No limit. EBW: No limit. Emission Mask 2.1051 90.210 For any frequency removed from the EA licensees frequency block by up to and including 37.5 kHz, the power of any emission shall be attenuated below the transmitter power (P) in watts by at least 116 Log10(f/6.1) decibels or 50+10Log10(P) decibels or 80 decibels, whichever is the lesser attenuation, where f is the frequency removed from the center of the outer channel in the block in kilohertz and where f is greater than 12.5 kHz. Section 1 of Appendix B Section 2 of Appendix B Section 3 of Appendix B Section 4 of Appendix B PASS N/T PASS PASS Section 5 of Appendix B PASS emissions 2.1051, 90.691
< 43 + 10Log10(P[Watts]) for all out-of-band Spurious Emission at Antenna Terminals Field Strength of Spurious Radiation Frequency Stability NOTE: For the verdict, the N/A denotes not applicable, the N/T denotes not tested. Note LTE BAND 26 (814-849MHz) overlaps the entire frequency range of LTE BAND 5 (824-849MHz), therefore, test data provided in this report covers BAND 5 as well as BAND 26 subject to Part 22.
< 43 + 10Log10(P[Watts]) for all out-of-band Section 8 of Appendix B Section 6 of Appendix B Section 7 of Appendix B 2.1055, 90.213 2.1053, 90.691
< 2.5ppm. emissions PASS PASS PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 10 of 31 3 General Information 3.1 Client Information Applicant:
Fibocom Wireless Inc. Address of Applicant:
5/F, Tower A, Technology Building II, 1057 Nanhai Avenue, Shenzhen, China Manufacturer:
Fibocom Wireless Inc. Address of Manufacturer: 5/F, Tower A, Technology Building II, 1057 Nanhai Avenue, Shenzhen, China Factory:
Shenzhen Eternity Technology Co., Ltd Address of Factory:
1F, 2F, 4F Building A2, Yingzhan Industrial Zone, Longtian Community, Longtian Road, Pingshan District, Shenzhen, Guangdong Province, P.R. China 3.2 General Description of EUT Product Name:
LTE (CatM1,NB-IOT) Module Model No.:
Trade Mark:
Sample Type:
Antenna Type:
3.3 Test Mode Test Mode M910-GL Fibocom LTE (CatM1,NB-IOT) Module PIFA Test Modes Description GSM/TM1 GSM system, GPRS, GMSK modulation GSM/TM2 GSM system, EGPRS, 8PSK modulation LTE-M1 LTE-NB1 LTE/TM1 LTE system, QPSK modulation LTE system, BPSK modulation LTE/TM2 LTE system, QPSK modulation NOTE: The test mode(s) are selected according to relevant radio technology specifications. LTE system, 16QAM modulation This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 11 of 31 3.4 Frequency List of Low/Middle/High Channels Test Mode TX / RX GSM850 TX RX Test Mode TX / RX GSM1900 TX RX RF Channel Low (L) Middle (M) High (H) Channel 128 Channel 190 Channel 251 824.2MHz 836.6 MHz 848.8 MHz Channel 128 Channel 190 Channel 251 869.2 MHz 881.6 MHz 893.8 MHz RF Channel Low (L) Middle (M) High (H) Channel 512 Channel 661 Channel 810 1850.2MHz 1880.0 MHz 1909.8 MHz Channel 512 Channel 661 Channel 810 1930.2 MHz 1960.0 MHz 1989.8 MHz Channel/Frequency(MHz) Channel Frequency Channel/Frequency(MHz) Channel Frequency Channel/Frequency(MHz) Channel Frequency Channel/Frequency(MHz) Channel Frequency Channel/Frequency(MHz) Channel Frequency LTE-NB1 BAND 2 Channel and Frequency List Lowest 18601 1850.1 Middle 18900 1880 LTE-NB1 BAND 4 Channel and Frequency List Lowest 19951 1710.1 Middle 20175 1732.5 LTE-NB1 BAND 5 Channel and Frequency List Lowest 20401 824.1 Middle 20525 836.5 LTE-NB1 BAND 12 Channel and Frequency List Lowest 23011 699.1 Middle 23095 707.5 LTE-NB1 BAND 13 Channel and Frequency List Lowest 23181 777.1 Middle 23230 782 LTE-NB1 BAND 26(814-824) Channel and Frequency List Channel/Frequency(MHz) Channel Frequency Lowest 26691 814.1 Middle 26740 819 Highest 19199 1909.9 Highest 20399 1754.9 Highest 20649 848.9 Highest 23179 715.9 Highest 23279 786.9 Highest 26789 823.9 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 12 of 31 LTE-NB1 BAND 26(824-849) Channel and Frequency List Channel/Frequency(MHz) Channel Frequency Lowest 26791 824.1 Test Mode Bandwidth TX / RX LTE BAND 2 1.4MHz 3MHz 5MHz 10MHz 15MHz 20MHz TX RX TX RX TX RX TX RX TX RX TX RX Middle 26925 836.5 Highest 27039 848.9 RF Channel Low (L) Middle (M) High (H) Channel 18607 Channel 18900 Channel 19193 1850.7 MHz 1880 MHz 1909.3 MHz Channel 607 Channel 900 Channel 1193 1930.7 MHz 1960 MHz 1989.3 MHz Channel 18615 Channel 18900 Channel 19185 1851.5 MHz 1880 MHz 1908.5 MHz Channel 615 Channel 900 Channel 1185 1931.5 MHz 1960 MHz 1988.5 MHz Channel 18625 Channel 18900 Channel 19175 1852.5 MHz 1880 MHz 1907.5 MHz Channel 625 Channel 900 Channel1175 1932.5 MHz 1960 MHz 1987.5 MHz Channel 18650 Channel 18900 Channel 19150 1855 MHz 1880 MHz 1905 MHz Channel 650 Channel 900 Channel 1150 1935 MHz 1960 MHz 1985 MHz Channel 18675 Channel 18900 Channel 19125 1857.5 MHz 1880 MHz 1902.5 MHz Channel 675 Channel 900 Channel 1125 1937.5 MHz 1960 MHz 1982.5 MHz Channel 18700 Channel 18900 Channel 19100 1860 MHz 1880 MHz 1900 MHz Channel 700 Channel 900 Channel 1100 1940 MHz 1960 MHz 1980 MHz Test Mode Bandwidth TX / RX RF Channel Low (L) Middle (M) High (H) LTE BAND 4 1.4MHz 3MHz TX RX TX RX Channel 19957 Channel 20175 Channel 20393 1710.7 MHz 1732.5 MHz 1754.3 MHz Channel 1975 Channel 2175 Channel 2375 2112.5 MHz 2132.5MHz 2152.5 MHz Channel 19965 Channel 20175 Channel 20385 1711.5 MHz 1732.5 MHz 1753.5 MHz Channel 2000 Channel 2175 Channel 2350 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 13 of 31 5MHz 10MHz 15MHz 20MHz TX RX TX RX TX RX TX RX Test Mode Bandwidth TX / RX LTE BAND 5 1.4MHz 3MHz 5MHz 10MHz TX RX TX RX TX RX TX RX 2115 MHz 2132.5MHz 2150 MHz Channel 19975 Channel 20175 Channel 20375 1712.5 MHz 1732.5 MHz 1752.5 MHz Channel 1975 Channel 2175 Channel 2375 2112.5 MHz 2132.5MHz 2152.5 MHz Channel 20000 Channel 20175 Channel 20350 1715 MHz 1732.5 MHz 1750 MHz Channel 2000 Channel 2175 Channel 2350 2115 MHz 2132.5MHz 2150 MHz Channel 20025 Channel 20175 Channel 20325 1717.5 MHz 1732.5 MHz 1747.5 MHz Channel 2025 Channel 2175 Channel 2325 2117.5 MHz 2132.5MHz 2147.5 MHz Channel 20050 Channel 20175 Channel 20300 1720 MHz 1732.5 MHz 1745 MHz Channel 2050 Channel 2175 Channel 2300 2120 MHz 2132.5MHz 2145 MHz RF Channel Low (L) Middle (M) High (H) Channel 20407 Channel 20525 Channel 20643 824.7 MHz 836.5 MHz 848.3 MHz Channel 2407 Channel 2525 Channel 2643 869.7 MHz 881.5 MHz 893.3 MHz Channel 20415 Channel 20525 Channel 20635 825.5 MHz 836.5 MHz 847.5 MHz Channel 2415 Channel 2525 Channel 2635 870.5 MHz 881.5 MHz 892.5 MHz Channel 20425 Channel 20525 Channel 20625 826.5 MHz 836.5 MHz 846.5 MHz Channel 2425 Channel 2525 Channel 2625 871.5 MHz 881.5 MHz 891.5 MHz Channel 20450 Channel 20525 Channel 20600 829 MHz 836.5 MHz 844 MHz Channel 2450 Channel 2525 Channel 2600 874 MHz 881.5 MHz 889 MHz Test Mode Bandwidth TX / RX RF Channel This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 14 of 31 LTE BAND12 1.4MHz 3MHz 5MHz 10MHz TX RX TX RX TX RX TX RX Test Mode Bandwidth TX / RX LTE BAND 13 5MHz 10MHz TX RX TX RX Test Mode Bandwidth TX / RX LTE BAND26
(814-824) 1.4MHz 3MHz TX RX TX RX Low (L) Middle (M) High (H) Channel 23017 Channel 23095 Channel 23173 699.7 MHz 707.5 MHz 715.3 MHz Channel 5017 Channel 5095 Channel 5173 729.7 MHz 737.5 MHz 745.3 MHz Channel 23025 Channel 23095 Channel 23165 700.5 MHz 707.5 MHz 714.5 MHz Channel 5025 Channel 5095 Channel 5165 730.5 MHz 737.5 MHz 744.5 MHz Channel 23035 Channel 23095 Channel 23155 701.5 MHz 707.5 MHz 713.5 MHz Channel 5035 Channel 5095 Channel 5155 731.5 MHz 737.5 MHz 743.5 MHz Channel 23060 Channel 23095 Channel 23130 704 MHz 707.5 MHz 711 MHz Channel 5060 Channel 5095 Channel 5130 734 MHz 737.5 MHz 741 MHz RF Channel Low (L) Middle (M) High (H) Channel 23025 Channel 23230 Channel 23255 779.5 MHz 782 MHz 784.5 MHz Channel 5205 Channel 5230 Channel 5255 748.5 MHz 751 MHz 753.5 MHz Channel 23230 Channel 23230 Channel 23230 782 MHz 782 MHz 782 MHz Channel 5230 Channel 5230 Channel 5230 751 MHz 751 MHz 751 MHz RF Channel Low (L) Middle (M) High (H) Channel 26697 Channel 26740 Channel 26783 814.7 MHz 819 MHz 823.3 MHz Channel 8697 Channel 8740 Channel 8783 859.7 MHz 864MHz 868.3 MHz Channel 26705 Channel 26740 Channel 26775 815.5 MHz 819 MHz 822.5 MHz Channel 8705 Channel 8740 Channel 8775 860.5 MHz 864MHz 867.5 MHz 5MHz TX Channel 26715 Channel 26740 Channel 26765 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 15 of 31 816.5 MHz 819 MHz 821.5 MHz Channel 8715 Channel 8740 Channel 8755 861.5 MHz 864MHz 866.5 MHz Channel 26740 Channel 26740 Channel 26740 819 MHz 819 MHz 819 MHz Channel 8740 Channel 8740 Channel 8740 864MHz 864MHz 864MHz RX TX RX 10MHz Test Mode Bandwidth TX / RX 1.4MHz 3MHz LTE BAND26
(824-849) 5MHz 10MHz 15MHz TX RX TX RX TX RX TX RX TX RX RF Channel Low (L) Middle (M) High (H) Channel 26797 Channel 26915 Channel 27033 824.7 MHz 836.5 MHz 848.3 MHz Channel 8697 Channel 8915 Channel 9033 859.7 MHz 881.5 MHz 893.3 MHz Channel 26805 Channel 26915 Channel 27025 825.5 MHz 836.5 MHz 847.5 MHz Channel 8805 Channel 8915 Channel 9025 860.5 MHz 881.5 MHz 892.5 MHz Channel 26815 Channel 26915 Channel 27015 826.5 MHz 836.5 MHz 846.5 MHz Channel 8815 Channel 8915 Channel 9015 871.5 MHz 881.5 MHz 891.5 MHz Channel 26840 Channel 26915 Channel 26990 829 MHz 836.5 MHz 844 MHz Channel 8840 Channel 8915 Channel 8990 874 MHz 881.5 MHz 889 MHz Channel 26865 Channel 26915 Channel 26965 831.5 MHz 836.5 MHz 841.5 MHz Channel 8865 Channel 8915 Channel 8965 876.5 MHz 881.5 MHz 886.5 MHz This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 16 of 31 3.5 Test Environment Environment Parameter Relative Humidity Atmospheric Pressure:
Temperature Voltage:
Selected Values During Tests 52%
101.32 KPa NT LV NV HV 25 C 3.3V 3.8V 4.3V NOTE: LV= lower extreme test voltage; NV= nominal voltage HV= upper extreme test voltage; NT= normal temperature 3.6 Test Location All tests were performed at:
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 3.7 Test Facility The test facility is recognized, certified, or accredited by the following organizations:
CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. FCC Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. Industry Canada (IC) This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 17 of 31 Two 3m Semi-anechoic chambers and the 10m Semi-anechoic chamber of SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab have been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 4620C-1, 4620C-2, 4620C-3. 3.8 Deviation from Standards None. 3.9 Abnormalities from Standard Conditions None. 3.10Other Information Requested by the Customer None. 3.11 Technical Specification Characteristics Description Radio System Type GSM LTE GSM850 GSM1900 LTE BAND 2 LTE BAND 4 Supported Frequency Range LTE BAND 5 LTE BAND 12 LTE BAND 13 LTE BAND 26
(814 to 824 MHz ) LTE BAND 26
(824 to 849 MHz ) GSM850:32.5 dBm GSM1900: 30dBm Target TX Output Power Transmission (TX):824 to 849 MHz Receiving (RX):869 to 894 MHz Transmission (TX):1850 to 1910 MHz Receiving (RX): 1930 to 1990 MHz Transmission (TX):1850 to 1910 MHz Receiving (RX):1930 to 1990 MHz Transmission (TX):1710 to 1755 MHz Receiving (RX): 2110 to 2155 MHz Transmission (TX): 824 to 849 MHz Receiving (RX): 869 to 894 MHz Transmission (TX):699 to 716 MHz Receiving (RX): 729 to 746 MHz Transmission (TX):777 to 787 MHz Receiving (RX): 746 to 756 MHz Transmission (TX): 814 to 824MHz Receiving (RX): 859 to 869 MHz Transmission (TX):824 to 849 MHz Receiving (RX):869 to 894 MHz This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 18 of 31 LTE -M1 BAND 2: 24dBm LTE -M1 BAND 4: 24dBm LTE -M1 BAND 5: 24dBm LTE -M1 BAND 12: 24dBm LTE -M1 BAND 13: 24dBm LTE -M1 BAND 26: 24dBm LTE -NB1 BAND 2: 23.5dBm LTE -NB1 BAND 4: 23.5dBm LTE -NB1 BAND 5: 23.5dBm LTE -NB1 BAND 12: 23.5dBm LTE -NB1 BAND 13: 23.5dBm LTE -NB1 BAND 26: 23.5dBm GSM System:
0.2 MHz LTE-M1 Supported Channel Bandwidth LTE BAND 2 LTE BAND 4 LTE BAND 5 LTE BAND 12 LTE BAND 13 LTE BAND 26
(814-824) LTE BAND 26
(824-849) LTE BAND 2 LTE BAND 4 LTE BAND 5 5 MHz;
10 MHz;
15 MHz, 20 MHz 1.4 MHz;
3 MHz;
5 MHz;
10 MHz;
15 MHz, 20 MHz 1.4 MHz;
3 MHz;
5 MHz;
10 MHz 1.4 MHz;
3 MHz;
5 MHz;
10 MHz 5 MHz;
10 MHz 1.4 MHz;
3 MHz;
5 MHz;
10 MHz;
1.4 MHz;
3 MHz;
5 MHz;
10 MHz;
15 MHz Subcarrier:
3.75KHz MHz;
15 KHz Subcarrier:
3.75KHz MHz;
15 KHz Subcarrier:
3.75KHz MHz;
15 KHz LTE BAND 12 Subcarrier:
3.75KHz MHz;
15 KHz LTE-NB1 LTE BAND 13 Subcarrier:
3.75KHz MHz;
15 KHz LTE BAND 26
(814-824) LTE BAND 26
(824-849) Subcarrier:
3.75KHz MHz;
15 KHz Subcarrier:
3.75KHz MHz;
15 KHz Characteristics Description Designation of Emissions GSM850 GSM1900
(Note: the necessary bandwidth of which is the worst value from the measured occupied LTE M1 BAND 2 LTE-M1 LTE M1 BAND 4 246KGXW; 246KG7W 246KGXW; 245KG7W 1M11G7D;1M13W7D;
1M11G7D;1M12W7D;
LTE M1 BAND 12 1M11G7D;1M11W7D;
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. bandwidths for each type of channel bandwidth configuration.) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 19 of 31 LTE M1 BAND13 1M10G7D;1M11W7D;
LTE M1 BAND 26814-824 1M10G7D;1M11W7D LTE M1 BAND 5 LTE M1 BAND 26824-849 1M12G7D;1M11W7D;
LTE NB1 BAND 2 LTE NB1 BAND 4 LTE NB1 BAND 12 LTE-NB1 LTE NB1 BAND13 186KG7D 185KG7D 187KG7D 186KG7D LTE NB1 BAND 26814-824 185KG7D LTE NB1 BAND 5 LTE NB1 BAND 26824-849 185KG7D 4 Description of Tests 4.1 Conducted Output Power Measurement Procedure: FCC KDB 971168 D01 V03r01 The transmitter output was connected to a calibrated coaxial cable, attenuator and power meter, the other end of which was connected to a Base Station Simulator. The Base Station Simulator was set to force the EUT to its maximum power setting. The power output at the transmitter antenna port was determined by adding the value of the cable insertion loss to the power reading. The tests were performed at three frequencies (low channel, middle channel and high channel) and on the highest power levels, which can be setup on the transmitters. Note: Reference test setup 1 4.2 Effective (Isotropic) Radiated Power of Transmitter Measurement Procedure: FCC KDB 971168 D01 V03r01 ; ANSI/TIA-603-E-2016-Section 2.2.17 Below 1GHz test procedure as below:
1). The EUT was powered ON and placed on a 0.8m high table in the chamber. The antenna of the transmitter was extended to its maximum length. 2). The disturbance of the transmitter was maximized on the test receiver display by raising and lowering from 1m to 4m the receive antenna and by rotating through 360 the turntable. After the fundamental emission was maximized, a field strength measurement was made. 3). Steps 1) and 2) were performed with the EUT and the receive antenna in both vertical and horizontal polarization. 4). The transmitter was then removed and replaced with another antenna. The center of the antenna was approximately at the same location as the center of the transmitter. 5). A signal at the disturbance was fed to the substitution antenna by means of a non-radiating cable. With both the substitution and the receive antennas horizontally polarized, the receive antenna was raised and lowered to obtain a maximum reading at the test receiver. The level of the signal generator was adjusted until the measured field strength level in step 2) is obtained for this set of conditions. 6). The output power into the substitution antenna was then measured. 7). Steps 5) and 6) were repeated with both antennas polarized. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 20 of 31 8). Calculate power in dBm by the following formula:
ERP (dBm) = Pg(dBm) cable loss (dB) + antenna gain (dBd) Where:
Pg is the generator output power into the substitution antenna. Above 1GHz test procedure as below:
1). Different between above is the test site, change from Semi- Anechoic Chamber to fully Anechoic Chamber 2). Calculate power in dBm by the following formula:
EIRP(dBm) = Pg(dBm) cable loss (dB) + antenna gain (dBi) EIRP=ERP+2.15dB Where:
Pg is the generator output power into the substitution antenna. 3). Test the EUT in the lowest channel, the middle channel the Highest channel 4). The radiation measurements are performed in X, Y, Z axis positioning. And found the X axis positioning which it is worse case, Only the test worst case mode is recorded in the report. 5). Repeat above procedures until all frequencies measured was complete. Note: Reference test setup 2 4.3 Occupied Bandwidth Measurement Procedure: FCC KDB 971168 D01 V03r01 Section 4.2 The occupied bandwidth, that is the frequency bandwidth such that, below its lower and above its upper frequency limits, the mean powers radiated are each equal to 0.5 percent of the total mean power radiated by a given emission shall be measured. The transmitter output was connected to a calibrated coaxial cable, attenuator and Spectrum analyser, the other end of which was connected to a Base Station Simulator. The Base Station Simulator was set to force the EUT to its maximum power setting. The tests were performed at three frequencies (low channel, middle channel and high channel).The span of the analyzer shall be set to capture all products of the modulation process, including the emission skirts. The resolution bandwidth shall be set to as close to 1 percent of the selected span as is possible without being below 1 percent. The video bandwidth shall be set to 3 times the resolution bandwidth. Video averaging is not permitted. Where practical, a sampling detector shall be used since a peak or, peak hold, may produce a wider bandwidth than actual. The trace data points are recovered and are directly summed in linear terms. The recovered amplitude data points, beginning at the lowest frequency, are placed in a running sum until 0.5 percent of the total is reached and that frequency recorded. The process is repeated for the highest frequency data points. This frequency is recorded. The span between the two recorded frequencies is the occupied bandwidth. Note: Reference test setup 1 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 21 of 31 4.4 Band Edge at Antenna Terminals Measurement Procedure: FCC KDB 971168 D01 V03r01 Section 6.0 The transmitter output was connected to a calibrated coaxial cable, attenuator and Spectrum analyser, the other end of which was connected to a Base Station Simulator. The Base Station Simulator was set to force the EUT to its maximum power setting. The tests were performed at three frequencies (low channel and high channel).in the 1MHz bands immediately outside and adjacent to the frequency block a resolution bandwidth of 100kHz or 1% of the emission bandwidth of the fundamental emission of the transmitter may be employed. The EUT emission bandwidth is measured as the width of the signal between two points, outside of which all emission are attenuated at least 26dB below the transmitter power. The video bandwidth of the spectrum analyzer was set at thrice the resolution bandwidth. Detector Mode was set to peak or peak hold power. Note: Reference test setup 1 4.5 Spurious And Harmonic Emissions at Antenna Terminal Measurement Procedure: FCC KDB 971168 D01 V03r01 The transmitter output was connected to a calibrated coaxial cable, attenuator and Spectrum analyzer, the other end of which was connected to a Base Station Simulator. The Base Station Simulator was set to force the EUT to its maximum power setting. The tests were performed at three frequencies (low channel and high channel).The level of the carrier and the various conducted spurious and harmonic frequencies is This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 22 of 31 measured by means of a calibrated spectrum analyzer. The spectrum is scanned from the lowest frequency generated in the equipment up to a frequency including its 10th harmonic. On any frequency outside a licensees frequency block, the power of any emission shall be attenuated below the transmitter power (P) by at least 43 + 10 log(P) dB. Compliance with these provisions is based on the use of measurement instrumentation employing a resolution bandwidth of 1 MHz or greater. However, in the 1 MHz bands immediately outside and adjacent to the frequency block a resolution bandwidth of at least one percent of the emission bandwidth of the fundamental emission of the transmitter may be employed. The emission bandwidth is defined as the width of the signal between two points, one below the carrier center frequency and one above the carrier center frequency, outside of which all emission are attenuated at least 26 dB below the transmitter power. Note: Reference test setup 1 4.6 Peak-Average Ratio Measurement Procedure: FCC KDB 971168 D01 V03r01 Section 5.7.1 A peak to average ratio measurement is performed at the conducted port of the EUT. For WCDMA signals, the spectrum analyzers Complementary Cumulative Distribution Function (CCDF) measurement profile is used to determine the largest deviation between the average and the peak power of the EUT in a given bandwidth. The CCDF curve shows how much time the peak waveform spends at or above a given average power level. The percent of time the signal spends at or above the level defines the probability for that particular power level. For GSM signals, an average and a peak trace are used on a spectrum analyzer to determine the largest deviation between the average and the peak power of the EUT in a bandwidth greater than the emission bandwidth. The traces are generated with the spectrum analyzer set to zero span mode. Note: Reference test setup 1 4.7 Field Strength of Spurious Radiation Measurement Procedure: FCC KDB 971168 D01 V03r01 Below 1GHz test procedure as below:
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 23 of 31 1). The EUT was powered ON and placed on a 150cm high table in the chamber. The antenna of the transmitter was extended to its maximum length. 2). The disturbance of the transmitter was maximized on the test receiver display by raising and lowering from 1m to 4m (for the test frequency of below 30MHz, the antenna was tuned to heights 1 meter) the receive antenna and by rotating through 360 the turntable. After the fundamental emission was maximized, a field strength measurement was made. 3). Steps 1) and 2) were performed with the EUT and the receive antenna in both vertical and horizontal polarization. 4). The transmitter was then removed and replaced with another antenna. The center of the antenna was approximately at the same location as the center of the transmitter. 5). A signal at the disturbance was fed to the substitution antenna by means of a non-radiating cable. With both the substitution and the receive antennas horizontally polarized, the receive antenna was raised and lowered to obtain a maximum reading at the test receiver. The level of the signal generator was adjusted until the measured field strength level in step 2) is obtained for this set of conditions. 6). The output power into the substitution antenna was then measured. 7). Steps 5) and 6) were repeated with both antennas polarized. 8) Calculate power in dBm by the following formula:
ERP(dBm) = Pg(dBm) cable loss (dB) + antenna gain (dBd) Where:
Pd is the dipole equivalent power, Pg is the generator output into the substitution antenna, and the antenna gain is the gain of the substitute antenna used relative to either a half-wave dipole (dBd) or an isotropic source (dBi). The substitute level is equal to Pg [dBm] cable loss [dB]. The calculated Pd levels are then compared to the absolute spurious emission limit of -13dBm which is equivalent to the required minimum attenuation of 43 + 10log10(Power [Watts]). Above 1GHz test procedure as below:
1) Different between above is the test site, change from Semi- Anechoic Chamber to fully Anechoic Chamber 2) Calculate power in dBm by the following formula:
EIRP(dBm) = Pg(dBm) cable loss (dB) + antenna gain (dBi) EIRP=ERP+2.15dB Where:
Pg is the generator output power into the substitution antenna. 3. Test the EUT in the lowest channel, the middle channel the Highest channel 4. The radiation measurements are performed in X, Y, Z axis positioning. And found the X axis positioning which it is worse case, Only the test worst case mode is recorded in the report. 5. Repeat above procedures until all frequencies measured was complete Note: Reference test setup 3 4.8 Frequency Stability / Temperature Variation Measurement Procedure:
Frequency stability testing is performed in accordance with the guidelines of FCC KDB 971168 D01 V03r01;
ANSI/TIA-603-E-2016
. The frequency stability of the transmitter is measured by:
a.) Temperature: The temperature is varied from -30C to +50C in 10C increments using an environmental chamber. b.) Primary Supply Voltage: The primary supply voltage is varied from 85% to 115% of the nominal value for non hand-carried battery and AC powered equipment. For hand-carried, battery-powered equipment, This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 24 of 31 primary supply voltage is reduced to the battery operating end point which shall be specified by the manufacturer. Specification The frequency stability shall be sufficient to ensure that the fundamental emission stays within the authorized frequency block. The frequency stability of the transmitter shall be maintained within 0.00025% (2.5 ppm ) of the center frequency. Time Period and Procedure:
1. The carrier frequency of the transmitter is measured at room temperature (20C to provide a reference). 2. The equipment is turned on in a standby condition for fifteen minutes before applying power to the transmitter. Measurement of the carrier frequency of the transmitter is made within one minute after applying power to the transmitter. 3. Frequency measurements are made at 10C intervals ranging from -30C to +50C. A period of at least one half-hour is provided to allow stabilization of the equipment at each temperature level. Note: Reference test setup 4 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 4.9 Test Setups 4.9.1 Test Setup 1 4.9.2 Test Setup 2 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 25 of 31 Figure 1. 30MHz to 1GHz Figure 2. above 1GHz This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 4.9.3 Test Setup 3 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 26 of 31 Figure 1. Below 30MHz Figure 2. 30MHz to 1GHz Figure 3. above 1GHz 4.9.4 Test Setup 4 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 27 of 31 4.10 Test Conditions Test Case Test Conditions Transmit Output Power Data Average Power, Total Average Power, Spectral Density (if required) Test Environment Ambient Climate & Rated Voltage Test Setup Test Setup 1 Channels RF
(TX) L, M, H (L= low channel, M= middle channel, H= high channel ) Test Mode Test Environment GSM/TM1;GSM/TM2; LTE/TM1;LTE/TM2 Ambient Climate & Rated Voltage Test Setup Test Setup 1 Channels RF
(TX) L, M, H (L= low channel, M= middle channel, H= high channel ) Test Mode Test Environment GSM/TM1;GSM/TM2; LTE/TM1;LTE/TM2 Ambient Climate & Rated Voltage Peak-to-Average Ratio Test Setup Test Setup 1
(if required) Channels RF
(TX) L, M, H (L= low channel, M= middle channel, H= high channel ) Test Mode Test Environment GSM/TM1;GSM/TM2;LTE/TM1;LTE/TM2 Ambient Climate & Rated Voltage Test Setup Test Setup 1 Channels RF
(TX) Test Mode Test Environment M (M= middle channel ) GSM/TM1;GSM/TM2; LTE/TM1;LTE/TM2 Ambient Climate & Rated Voltage Test Setup Test Setup 1 Channels RF
(TX) L, M, H (L= low channel, M= middle channel, H= high channel ) Test Mode Test Environment GSM/TM1;GSM/TM2; LTE/TM1;LTE/TM2 Ambient Climate & Rated Voltage Test Setup Test Setup 1 Modulation Characteristics Bandwidth Occupied Bandwidth Emission Bandwidth
(if required) RF
(TX) Channels L, M, H (L= low channel, M= middle channel, H= high channel ) Band Edges Compliance Test Mode Test Environment GSM/TM1;GSM/TM2; LTE/TM1;LTE/TM2 Ambient Climate & Rated Voltage This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Spurious Emission at Antenna Terminals SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 28 of 31 Test Setup Test Setup 1 Channels RF
(TX) Test Mode Test Environment L, H (L= low channel, H= high channel ) GSM/TM1;GSM/TM2; LTE/TM1;LTE/TM2 Ambient Climate & Rated Voltage Test Setup Test Setup 1 RF
(TX) Channels L,M, H
(L= low channel, M= middle channel, H= high channel ) Test Mode GSM/TM1;UMTS/TM1; LTE/TM1 Test Environment Ambient Climate & Rated Voltage Test Setup Test Setup 2 Field Strength of Spurious Radiation Test Mode GSM/TM1;GSM/TM2; LTE/TM1;LTE/TM2;
NOTE: If applicable, the EUT conf. that has maximum power density (based on the equivalent power level) is selected. Channels RF
(TX) L, M, H (L= low channel, M= middle channel, H= high channel ) Test Environment
(1) -30 C to +50 C with step 10 C at Rated Voltage;
(2) VL, VN and VH of Rated Voltage at Ambient Climate. Test Setup Test Setup 4 Channels RF
(TX) L, M, H (L= low channel, M= middle channel, H= high channel ) Test Mode GSM/TM1;GSM/TM2; LTE/TM1;LTE/TM2 Frequency Stability This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 29 of 31 5 Main Test Instruments RE in Chamber Item Test Equipment Manufacturer Model No. Inventory No. Cal. date
(yyyy/mm/dd) Cal.Due date
(yyyy/mm/dd) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 3m Semi-Anechoic Chamber 3m Semi-Anechoic Chamber EMI Test Receiver ETS-LINDGREN N/A SEM001-01 2018/03/13 2021/03/12 AUDIX Agilent Technologies N/A SEM001-02 2018/03/13 2021/03/12 N9038A SEM004-05 2017/10/09 2018/10/09 EXA Signal Agilent Analyzer (10Hz-
Technologies N9010A SEM004-09 2018/04/13 2019/04/12 26.5GHz) Inc BiConiLog Antenna
(26-3000MHz) Double-ridged horn
(1-18GHz) Horn Antenna (18-
26GHz) Horn Antenna
(15GHz-40GHz) ETS-LINDGREN 3142C SEM003-02 201711/15 2020/11/15 ETS-LINDGREN 3117 SEM003-11 2015/10/17 2018/10/17 ETS-LINDGREN 3160 SEM003-12 2017/11/24 2020/11/24 Schwarzbeck BBHA 9170 SEM003-15 2017/10/17 2020/10/17 Low Noise Amplifier Black Diamond
(100MHz-18GHz) Series Band filter Pre-amplifier (0.1-
N/A Agilent 1300MHz) Technologies BDLNA-
0118-
352810 N/A SEM005-05 2017/09/27 2018/09/26 N/A N/A N/A 8447D SEM005-01 2018/03/13 2019/03/12 Pre-Amplifier (0.1-
26.5GHz) Pre-amplifier
(26GHz-40GHz) Band filter Universal radio communication tester Universal radio communication tester Compliance Directions Systems Inc. Compliance Directions Systems Inc. Amindeon PAP-0126 SEM004-10 2017/10/17 2018/10/17 PAP-2640-
50 SEM005-08 2018/03/14 2019/03/14 82346 SEM023-01 N/A N/A Rohde &Schwarz CMU200 SEM010-01 2017/10/09 2018/10/09 Rohde &Schwarz CMW500 SEM010-03 2017/10/23 2018/10/23 DC Power Supply Zhao Xin RXN-305D SEM011-02 2017/10/09 2018/10/09 BiConiLog Antenna Schwarzbeck VULB9163 SEM003-05 2015/10/17 2018/10/17 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 30 of 31
(30MHz-3GHz) Horn Antenna
(800MHz-18GHz) 19 Rohde &Schwarz HF907 SEM003-06 2018/06/06 2021/06/06 RE in Chamber Item Test Equipment Manufacturer Model No. Inventory No. Cal. Date (yyyy-
mm-dd) Cal. Due date
(yyyy-mm-dd) 1 2 3 4 5 10m Semi-Anechoic Chamber EMI Test Receiver
(9k-7GHz) Trilog-Broadband Antenna(30M-1GHz) SAEMC FSAC1018 SEM001-03 2018/3/10 2019/3/9 Rohde & Schwarz ESR SEM004-03 2018/02/14 2019/02/14 Schwarzbeck VULB9168 SEM003-18 2016/06/29 2019/06/29 Pre-amplifier Sonoma Instrument Co 310N SEM005-03 2018/6/6 2019/6/5
.Loop Antenna ETS-Lindgren 6502 SEM003-08 2015/08/14 2018/08/14 RF connected test Item Test Equipment Manufacturer Model No. Inventory Cal. date Cal.Due date No.
(yyyy-mm-dd)
(yyyy-mm-dd) 1 2 3 4 5 6 7 8 9 Humi/ Temp Indicator MingGao TH101B W006-09 2018/03/13 2019/03/12 Signal Analyzer Spectrum Analyzer
(20Hz-43GHz) Rohde Schwarz Rohde &
Schwarz FSV W005-02 2018/03/13 2019/03/12 FSU43 SEM004-08 2018/04/14 2019/04/13 Barometer ChangChun DYM3 SEL0088 2018/05/24 2019/05/24 Dual Output Mobile Communication DC Source Digital Multimeter Wideband Radio Communication Tester Wideband Radio CommunicationTester Agilent Technologies 66311B W009-09 2018/4/28 2019/4/28 Inc Fluke Rohde &
Schwarz Rohde &
Schwarz 15B+
W055-01 2018/03/13 2019/03/12 CMW500 W005-02 2018/03/13 2019/03/12 CMW500 W005-02 2018/03/13 2019/03/12 Temperature Chamber GIANT FORCE ICT-150-40-
CP-AR W027-04 2017/12/04 2018/12/04 10 Wideband Radio CommunicationTeste Anristu MT8821C 6201462742 2017/8/13 2018/8/12 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321702 Page: 31 of 31 6 Measurement Uncertainty For a 95% confidence level (k = 2), the measurement expanded uncertainties for defined systems, in accordance with the recommendations of ISO 17025 as following:
Test Item Extended Uncertainty Data Transmit Output Power Data Power [dBm]
Bandwidth Magnitude [%]
U =0.37 dB U = 0.2%
Band Edge Compliance Disturbance Power [dBm]
U = 2.0 dB Spurious Emissions, Conducted Disturbance Power [dBm]
U = 2.0 dB Field Strength of Spurious Radiation ERP[dBm]/EIRP [dBm]
For 3 m Chamber:
U = 4.5 dB (30 MHz to 1GHz) U = 3.3 dB (above 1 GHz) For 10 m Chamber:
U = 4.5 dB (30 MHz to 1GHz) U = 3.2 dB (above 1 GHz) Frequency Stability Frequency Accuracy [ppm]
U = 0.24 ppm 7 Photographs - EUT Constructional Details Refer to Appendix A - Photographs of EUT Constructional Details for SZEM1804003217RG. The End This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
This product uses the FCC Data API but is not endorsed or certified by the FCC