Paxton ins-40213-US Paxlock US
???????????????
12) Rear battery cover 13) Rear handle cover 14) Rear Handle 15) Small mounting screws x 2 16) Long mounting screws x 3 17) Battery cover key 18) Handle removal pin 19) Keys x 2 *
20) Handle washers x 2 21) Strike plate 22) Strike plate screws x 2 Whats in the box 1) Front handle 2) Lock Cylinder *
3) Paxlock front housing 4) Motor adjustment plate 5) Motor 6) 2-3/8 Latch 7) Latch screws x 2 8) Motor backplate 9) Backplate/Rose assembly 10) Paxlock rear housing 11) 4 x AA Alkaline batteries
* Not for SFIC Tools List Power Drill Drill bits (1, 5/16, 5/8, 1/8) Crosshead screwdriver Chisel 1 Knife Adhesive tape Pencil Tape measure 1 x 2x 2X 312*345689101516171819*720212211121314 Step 1: Marking out Tape template to door, mark holes then remove template for drilling. Step 2: Drilling To ensure accuracy you should drill holes from both sides of the door towards the center. This avoids the risk of damaging the door face when the drill breaks through. Make sure to include pilot holes either side of the central hole to ensure flush fitting of the motor plates. Step 3: Marking out and chiseling for latch To install the latch; drill a 1 (25mm) hole, slide in the latch, then draw around the faceplate. Remove the latch and score the outline with a knife to avoid splitting the wood when chiselling. 2 122-3/8 (60mm) backset5/16 (8mm)5/16 (8mm)5/16 (8mm)5/16 (8mm)2-1/8 (54mm)5/16 (8mm)5/8 (16mm)31 (25mm) Width3-1/4 (82mm) Depthx 2x 2X 312*345689101516171819*720212211121314 Step 4: Fitting the door latch Attach the latch using the screws provided. Step 5: Fitting the strike plate Close the door to mark the horizontal line of the strike plate. Measure one half of door thickness from door stop to mark vertical center line of the strike. Drill 1 (25.4mm) hole, 1/2 (12.7mm) deep at intersection of horizontal and vertical center lines. Cut out jamb 3/32 (2.4mm) deep or until the strike is flush with jamb. Tighten the strike plate screws securely. Step 6: Inserting the motor Pass the motor through the central hole within the door, making sure to pass the motor lead through the hole first. 3 465 Step 7: Rotating the motor adjustment plate To ensure that the motor adjustment plate is at the correct distance, rotate until it sits flush with the door and the motor has engaged properly. Please refer to the diagram for the correct position of the plate for each door thickness. Step 8: Ensuring the latch engages Make sure the tail of the latch is engaging with the motor retractor correctly as illustrated. Step 9: Fitting the front housing Line up front housing and ensure the body is flush to the door.
*PaxLock US is set up for RH doors by default please see page 8 for LH operation. 4 897- 1-3/4 (45mm)- 2 (50mm) Step 10: Fitting the rear backplate assembly Feed the motor cable through the hole in the motor back plate. Step 11: Fitting the rear housing and motor wiring Feed both the cables through the rear housing cutout and fit the lower long mounting screws. Step 12: Fitting the rear lock assembly and wiring Fit top, long mounting screws and 2 lower short screws. 5 131415101112 Step 10: Fitting the batteries Step 11: Securing the rear cover Step 12: Fitting the cover plate and handle 6 131415101112 Optional step: Handle orientation for LH door To configure for LH door operation, remove the front and rear handles using the handle removal pin. Unscrew the 4 screws securing the rose to the front/rear housings, rotate 180 degrees and screw back together. Refit the handles, and push home until the axle engagement clicks. Optional step: Contact switch Optional step: Inserting the handle washers Handle feel can be tightened with the use of the included washers. 7 Software installation x1 x1 200 1000 Net2 Pro/Net2 Lite: http://paxton.info/1438 Wireless Signal Range 8 0 m3m15m20m30m50ft65ft100ft10ft0 ft Enrolling a PaxLock 9 124563 PaxLock reset 1 3 Battery replacement 1 3 2 4 2 4 10 Specifications Features Maximum number of users/tokens Access Levels Time zones Door unlock time Recommended number of Paxlocks per Net2Air bridge Net2Air bridge per system Net2Air wireless range Events stored Environment Battery type Typical Battery life Operating temperature Moisture resistance External Use Vandal resistance Dimensions Total outside dimensions (includes handle clearance) UL has only evaluated the Operating temperature specification Min Typ 1 sec Min 50 ft 4 x AA Alkaline Max 10,000 250 64 60 secs 10 200 3,584 Max 20,000 operations 0 C (-32 F) 30,000 operations
+55 C (+131F) IPX4 No No Height 81/2 Depth 3 Width 6 11 12
+44 (0)1273 811011paxton.supportsupport@paxton.co.uk+44 (0)1273 811011paxton.supportsupport@paxton.co.uk+1(800) 672-7298usapaxton.supportsupportUS@paxton-access.com+1(800) 672-7298usapaxton.supportsupportUS@paxton-access.com+49 (0) 251 2080 6900paxton.gmbh.supportsupport@paxton-gmbh.de+31 (0)76 3333 999paxton.benelux.supportsupport@paxton-benelux.com+31 (0)76 3333 999paxton.benelux.supportsupport@paxton-benelux.com+31 (0)76 3333 999paxton.benelux.supportsupport@paxton-benelux.com+33 (0)157 329356support@paxtonaccess.fr +27 (0) 272 14276691support@paxtonaccess.co.za+44 (0)1273 811011paxton.supportpaxton.supportpaxton.supportsupport@paxton.co.uk The declaration of conformity is available on request. Contact details are provided at:
http://paxton.info/596 These products are not suitable for retail sale. All warranties are invalid if these products are not installed by a competent person. North America:-
Product Compliance and limitations Wiring methods shall be in accordance with the National Electrical Code (ANSI/NFPA70), local codes, and the authorities having jurisdiction. To comply as a UL listed installation, the following conditions must apply:-
Server based functions (Antipassback, Time and Attendance, etc) have not been evaluated by UL and cannot be used for UL 294 installations. Where an equivalent cable / wire is used it must be UL Listed All interconnecting devices must be UL Listed. The use of Wiegand readers and the configuration software has not been evaluated by UL Door contact connections are limited to a maximum of 30m. IP rating not verified by UL. Indoor use only UL listed to the following standards: ANSI/UL 10C compliant (20 min fire doors), CAN/ULC S104 compliant (20 min fire doors), UL 294 compliant, CSA C22.2 NO. 205-12 compliant FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The Paxlock US has been designed and complies with the safety requirements for portable (<20cm) RF exposure in ac-
cordance with FCC rule part 2.1093 and KDB 447498 D01 as demonstrated in the RF exposure analysis. Installers must ensure that this device must not be co-located or operated in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. IC Compliance This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The Paxlock US has been designed and complies with the safety requirements for RF exposure in accordance with RSS-
102 as demonstrated in the RF exposure analysis. 13 14 Made in the UK Paxton Ltd 1.0.0 22/10/2014