Version: 2020-05-25
User Manual
Model: SB1008
1. Quick start guide
Overview
1. Screen
2. Touch key
3. Charging POGO PIN
Make sure the POGO-pins on the charging cable fit
correctly onto the charging terminals on the back of
smart watch.
Plug the big end of the USB cable to a power source
and after successful charging, a charging icon will
appear on the screen.
Install “Orunning” app on the phone
Search and install the “Orunning” app from Google Play
or App Store. Or scan the following QR code to install
the app directly.
Android
IOS
Connect the smart watch with the phone
1. Enable Bluetooth on your smart phone.
2. Open the “Orunning” app on your smart phone, and
then fill in all the requested information in the
“Settings” menu.
3. Tap “Connect device” in the “Settings” menu.
4. Select the smart watch icon to connect.
5. Choose your device name to connect it with your
phone.
Unbind smart watch with mobile phone
1. Open “Orunning” app on your smart phone.
2. Tap “Disconnect device” in the “Settings” menu and
confirm “OK”.
3. To disconnect your smart watch with an iPhone, click
“Disconnect device” in the “Settings” menu of
“Orunning” app, and go to the Bluetooth settings on
your iPhone, then access and select “Forget This
Device”.
Operation Introduction
To switch on the watch, press and hold the touch key
until the display is on.
To switch off the watch, press the touch key
repeatedly until “more” icon shows on the display and
then long press to enter in “Power off”, long press the
touch key again.
You can press the touch key, or turn on gesture
control in advanced settings of Orunning and raise your
hand to light the screen.
2. Functions
Watch face
Daily activities
There are 3 watch faces. In the current watch face, press
and hold the touch key to choose the one you like.
The watch will record your daily activity automatically.
Press the touch key to check pedometer, distance and
calories. After synchronizing with Orunning, these sports
data can be also checked in Orunning.
Sports
Press the touch key repeatedly until Sports icon shows
on the display and long press the touch key to enter in
the multi-sport mode.
The smart watch has 4 sports modes: Walking, Running,
Cycling and Hiking. Long press touch key to choose one
of them and then do sports. The smart watch will record
your sports data.
When you finish your sports, you can long press the
touch key twice to stop your sport and save the sports
data. If you’ve connected your smart watch with the
“Orunning” app via Bluetooth, you can also check your
sports data in the app.
Note: If the exercise time is less than 5 minutes, the data
cannot be saved.
Sleep status
Wear the watch to fall asleep during 9:00 p.m. to 9:00
a.m.; the watch can record your sleep data of last night
on the next day. Press the touch key repeatedly to check
the sleep data.
Message
Unread messages will be displayed in “Message”
interface. Long press the touch key to enter in and read
the messages on the watch.
Weather
More
Power Off
About
After connecting with Orunning, you can select city in
advanced settings of the app. And the weather of this
city will be displayed on the watch.
Press the touch key repeatedly until “More” icon shows
on the display and long press the touch key to enter in
“Power off”, “About”, “Find Phone” and “Reset”.
Long press the touch key to turn off the watch.
Long press the touch key, you can check watch name, BT
marc address and firmware version of your watch.
Find Phone
Reset
After connecting with Orunning, you can look for your
phone by long press the touch key.
Long press the touch key, your watch will be reset and
restart.
Sedentary reminder
Turn on the sedentary reminder you’ve set in Orunning.
When the time is up, your watch will vibrate to remind
you to do some sports.
Remote capture
After successfully connecting with Orunning, choose
“Take pictures” in Orunning, and then short press the
touch key to take photos, and long press the touch key
to exit.
Notifications
After successfully connecting with Orunning, turn on
“Notifications” in Settings, you will receive these
notifications on your watch.
More functions
Enjoy more smart functions in Orunning.
3.FCC Caution
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Any Changes or modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate the equipment.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
-
receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Increase the separation between the equipment and
- Consult the dealer or an experienced radio/TV
technician for help.
The device has been evaluated to meet general RF
exposure requirement. The device can be used in
portable exposure condition without restriction.