LIMITED WARRANTY Pelican Accessories warrants to the original consumer purchaser thatthe product will be free from defects in materials and / or workmanshipfor a period of 120 days from the date of purchase. If a defect covered by this warranty occurs during this period, Pelican Accessories at its option will repair or replace, at no charge, any part that Pelican Accessories determines to be defective. To obtain warranty service during the warranty period, send the defective product postage pre-paid, with a money order for $4.00 to cover thereturn postage and handling, along with proof of purchase and the dateof purchase to:
PELICAN ACCESSORIES 1840 East 27th Street Vernon, CA 90058 Up to 50 Feet of Range Over 100 Hours on Two AAs This warranty shall not apply if the product has been damaged by abuse,misuses, negligence, accident, modification, tampering or by any othercauses unrelated to defective materials and / or workmanship. 8 Separate Channels Repair or replacement as provided under this warranty is Pelican Accessories' exclusive prerogative. ANY APPLICABLE IMPLIED WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HERBY LIMITED TO 120 DAYS FROM THE DATE OF PURCHASE AN ARE SUBJECT TO THE CONDITIONS SET FORTH IN THIS LIMITED WARRANTY. IN NO EVENT SHALL PELICAN ACCESSORIES OR INCIDENTAL DAMAGES RESULT FROM THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTIES. This warranty gives you specific legal rights, and you may also have other legal rights, Which vary from state to state. Dual Rumble Motors Forward Positioned Black and White Buttons Low Battery Indicator Changes or modifications not expressly approved by the manufacture could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For technical questions please visit http://www.pelicanacc.com or call us directly at 1-800-331-3844 Pelican and its logo are registered trademarks. Xbox is a registered trademark of Microsoft Corporation. This product is not designed, manufactured, sponsored or endorsed by Microsoft Corporation. PL-2006 Instruction for Operation:
Instruction for Operation:
Eclipse Wireless Controller White Botton L Botton Analog Stick Power On/Off-
Rumble Off Switch D-Pad Back Botton Channel Switch LED CHANNEL 1 2 3 4 OFF ON RUMBLE OFF BACK START Start Button BAND B A Band Switch Black Button R Botton Action Buttons Black Button White Button Analog Stick Eclipse Wireless Receiver PRODUCT OVERVIEW:Eclipse Wireless Controller uses advance technology which gives you the ability to play without the limitations of a typical corded controller, hence there are a few switches and LED (lights) not found on your basic Xbox Controller. Channel Switch (Receiver and Controller):
This switch selects the broadcast channel of the radio frequency. There are four positions;
1, 2, 3 and 4. There is a corresponding Channel Switch on the receiver Band Switch (Receiver and Controller):
This switch selects the bandwidth. There are two positions; A and B. There is a corresponding Band Switch on the receiver Power Switch (Controller):
This switch selects the power mode. There are 3 positions; Off, On, and Rumble Off INSTRUCTIONS:
1. Insert Batteries:
Remove the battery lid and place the two AA batteries (included) into the Eclipse Wireless Controller. Make sure they are inserted as shown in the battery compartment. The batteries included are not long life. 2. Plug in the Receiver:
3. Check Band setting:
With the Xbox turned off, plug the cable of receiver into controller port one (far left port.) Confirm that the Band Switch is set to A on both the controller and the receiver. Note: the only time you would ever change this switch is if you experienced a drop off in the signal, causing game play to be suspended. If this happens repeatedly we suggest you switch to Band B on both the Controller and Receiver. 4. Select a Channel on the Controller:
You may select any channel you desire 1, 2, 3 or 4. 5. Select a Channel on the Receiver:
This must match the channel selected on the Controller. Note: If using more then one controller you must use different channel settings, i.e., the first controller and receiver are set to Channel 1, the second controller and receiver are set to Channel 2. The channel position selected on the Eclipse Wireless Controller and Receiver have no relation to the Xbox controller ports. 6. Turn ON the Controller Turn the power switch located on the Controller to the ON position - You will see the following:
On the Controller the LED will come on, lit green Note: If the LED on the pad comes on and goes to Red this is your low battery indicator meaning your battery has less then 20% power capacity. On the Receiver, the left LED will come on indicating there is a "Pad in". The right LED will flash continually indicating the signal is strong Note: If you wish to extend battery life select the rumble off position. This will turn off the rumble effect in game play, resulting in a doubling of your battery life. Memory Card Slots Signal LED (Red) OTHER FEATURES:
Multiple Players:
You may play with up to four Eclipse Wireless controllers. Check to see that the channel switches are set as outlined above. Power Save Mode:
When not in use the Eclipse Wireless controller automatically goes into a sleep mode to conserve batteries. A touch of any button puts the controller back into play mode. Note: Turn off the controller when not in use to extend your battery life. Link LED (Red) Channel Switch CHANNEL 1 2 3 4 SIGNAL BAND A B Band Switch