www.penclic.se 1 2 EN Welcome to the quick guide. Penclic Mini Keyboard combines ergonomically sound design with modern keyboard technology
Penclic Mini Keyboard setup Insert the rechargeable batteries and start charging with the included micro-USB charging cable. Insert the Nano-USB receiver into the USB port, then set the keyboard power switch on the bottom of the keyboard to ON. Driver installation starts automatically. The wireless connection activates automatically. How to use your Penclic Mini Keyboard Penclic Mini Keyboard K2 (wireless) has 1 LED indicating battery status. LED behavior Indication
repeatedly The keyboard on/
off switch was set to on. Recharge your battery. (NOTE:Do not recharge non-rechargeable batteries.)
green repeatedly Battery is currently being recharged. LED is constantly green Battery is currently being recharged. Num Lock actives the numpad functions which is the smaller orange numbers. Special functions (blue text) activated by holding the Fn key and then pressing:
Fn +
F2 F3 F4 F9 F10 F11 F12 Delete Up arrow Left arrow Down Arrow Right Arrow Function Mute Lower volume Higher volume Pause/Break Scroll Lock Num Lock Print Screen Insert Page Up Home Page Down End 2 3
The supported platforms for Penclic Mini Keyboard are all operating systems that support HID 1.1. These include Windows XP or later, Mac OSX version 10.1 or later and most
installation is needed. Connection USB. AAA 1.2V NiMH Recharging battery (Everyday use last approximately 2 months before charging is needed).
-Charging via USB .
battery can be used. NOTE: DO NOT RECHARGE. Nano USB-receiver 2,4GHz.
-Connection via USB . Energy saving mode starts after 10 min, press a button to start. MAC operating systems do not support all the special functions. Measurements
Height: 6 mm (21 mm at top),
Weight: 381g including 1.4m cable.
4 Troubleshooting
Make sure the Penclic Mini Keyboard USB
USB port. Un-plug and re-plug the Nano-USB receiver. Connect to another USB port. Connect to another computer. Check the battery. Technical support Should you require additional technical support with your Penclic, please use our Web site
(www.penclic.se) for further information or contact our support group through e-mail. Call Technical Support during business hours, Central European time (UTC+1). Contact
contact@penclic.se
FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. IC WARNING This device complies with Industry Canada RSS-210 standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.