FCC ID:2AS6EIP-BS-US IP-BS-US Setting Manual Copyright 2018 People & Technology Co., Ltd. All Rights Reserved Contents 1. Introduction ----------------------------------------
3 2. IP-BS-US --------------------------------------------
4 3. Hardware Specification ----------------------------
5 4. Scanner Install Location ----------------------------
6 5. Scanner Installation ---------------------------------
7 6. How to set up the scanner -------------------------
8 7. FAQ --------------------------------------------------
15 8. Special Note ------------------------------------------ 16 Copyright 2018 People & Technology Co., Ltd. All Rights Reserved 2 Introduction Purpose This document provides basic guidelines for customers who use products designed by People & Technology. Range The scope of this document is to provide software descriptions and general instructions from IP-BS-US. Object This document is intended for customers using People &
Technology's IP-BS - US. Question Please contact http://www.pntbiz.co.kr for technical support and documentation errors. Copyright 2018 People & Technology Co., Ltd. All Rights Reserved 3 IP-BS-US 2) Antenna 1) Scanner Body Component Description 1) IP-BS-US Scanner Body 2) Antenna
* If the component is missing or damaged, contact your place of purchase. Please keep the boxes and packaging materials in case of return. Copyright 2018 People & Technology Co., Ltd. All Rights Reserved 4 Hardware Specification Features Description CPU TI CC3200 ARM Cortex -M4 Core at 80 MHz Memory RAM (Up to 256KB) Storage External S-Flash Network 802.11 b/g/n BLE Scanner + Peripheral (nRF52832 x 2) Antenna BLE x2 / Wi-Fi x1 Power USB Port (With USB to UART) Copyright 2018 People & Technology Co., Ltd. All Rights Reserved 5 Scanner Install Location This scanner can be connected to the network anywhere within the range of the wireless network. However, the operating distance of the scanner, the range of wireless connections, may vary significantly depending on the physical arrangement of the scanner. For example, the thickness and number of walls that a wireless signal passes through can limit the scope of the scanner.
-
-
-
- Glass, insulated walls, tanks, mirrors, bricks, and concrete It is recommended to be near the WiFi router. Stay away from potentially interfering devices. Stay away from solid metal doors or metal surfaces. can affect radio signals. Copyright 2018 People & Technology Co., Ltd. All Rights Reserved 6 Scanner Installation Scanner Installation 1. Connect the scanner to the USB DC adapter. 2. Check the LEDs on the scanner. LED Scenario 1. Powered On 2. WiFi (AP) Connected 3. BT Signal Received 4. Data Transmitted PWR BT Wi-Fi PWR BT Wi-Fi PWR BT Wi-Fi PWR BT Wi-Fi Blinking 7 Copyright 2018 People & Technology Co., Ltd. All Rights Reserved How to set up the Scanner 1. Run the settings app provided. After launching the app, click the button in the lower right corner to search for the scanner. 2. Select the scanner you want to set from the list. Copyright 2018 People & Technology Co., Ltd. All Rights Reserved 8 How to set up the Scanner 3. Enter the PIN number you received.
(It can only be connected within 30 seconds of power on.) 4. Enter PIN number and the screen for setting up the scanner will be displayed. Copyright 2018 People & Technology Co., Ltd. All Rights Reserved 9 How to set up the Scanner 5. Click the SCAN SSID" button. 6. Click the "SEARCH" button in the top right corner to start WiFi scanning. Copyright 2018 People & Technology Co., Ltd. All Rights Reserved 10 How to set up the Scanner 7. Select the WiFi you want to connect to from the list.
*5GHz band is not supported 8. Check the selected WiFi SSID. Copyright 2018 People & Technology Co., Ltd. All Rights Reserved 11 How to set up the Scanner 9. Enter your WiFi password. 10. Check the scanner ID. Copyright 2018 People & Technology Co., Ltd. All Rights Reserved 12 How to set up the Scanner 11. Enter the server information to which the scanner will send data.
(Default value is WMS server information) 12. The scanner becomes a beacon and can send a beacon signal. Copyright 2018 People & Technology Co., Ltd. All Rights Reserved 13 How to set up the Scanner 13. Change to ON to set UUID, Major, Minor, Tx Power, Interval, and so on.
(USB Beacon information can also be changed by WMS) 14. When the setting is complete, click the
" Save " button to finish the setup. Copyright 2018 People & Technology Co., Ltd. All Rights Reserved 14 FAQ Q1. If you USB Scanner not found. A1. Turn off the scanner, power it back up, and try connecting It. can only be connected within 30 seconds of power on. Q2. If you unable to connect to WiFi SSID. A2. Please check your WiFi information and router settings. Q3. If you forgot ID and password. A3. Please contact the place of purchase or head office. Q4. If you want to buy an antenna. A4. Please contact the place of purchase or head office. If you have any questions, please contact http://www.pntbiz.com Copyright 2018 People & Technology Co., Ltd. All Rights Reserved 15 Special Note
* Bonding of scanner body and antenna When IP-BS-US is purchased by customers, the scanner body and the antenna of IP-BS-US is to be bonded firmly and then delivered to the customer to avoid separation of body and antenna.
* Separation of antenna is restricted for proper working We are NOT GAURANTEE of proper working of IP-BS-US in such a case when customer separates antenna of IP-BS-
US from its body at any reason. Copyright 2018 People & Technology Co., Ltd. All Rights Reserved 16 FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
* RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. www.pntbiz.com Copyright 2018 People & Technology Co., Ltd. All Rights Reserved