Read/write head IQH1-F198-V1
) x 4
(
6
. 6 105 12 Dimensions 5
. 6 7 5
. 0 9 1 5
. 6 9 5
. 2 0 1 48.5 78 145 175
+
A
-
B 1 2 3 4 Shield 13.56 MHz 26 kBit/s 0 ... 150 mm 0 ... 150 mm max. 145 mm green: power on green flashing: read/write attempt performed yellow: data carrier detected 1.3 W from the IDENTControl
-25 ... 70 C (-13 ... 158 F)
-40 ... 85 C (-40 ... 185 F) EN 301489-1:2011 V1.9.2, EN 301489-3:2013 V1.6.1, EN 300330-2:2015 V1.6.1, EN 60950-1:2006 EN 61000-6-2:2005, EN 61000-6-4:2006 EN 60529 ISO/IEC 15693-2:2006 , ISO/IEC 15693-3:2009 , ISO/IEC 18000-3 , Electrical connection 2 1 3 4 Technical data General specifications Operating frequency Transfer rate Sensing range Read distance Write distance Width Indicators/operating means LED green/yellow P0 Electrical specifications Power consumption Supply Ambient conditions Ambient temperature Storage temperature Compliance with standards and direc-
tives Directive conformity R&TTE Directive 1995/5/EC Standard conformity Electromagnetic compatibility Degree of protection RFID Approvals and certificates Model Number IQH1-F198-V1 HF read/write head, ISO 15693, for IDENTControl Features
Operating frequency 13.56 MHz
Conforms to ISO 15693
Suitable for FRAM transponder
Particularly flat construction
Connection cable with V1 plug
(M12 x 1)
Degree of protection IP67
For connection to IDENTControl con-
trol interface Accessories IQC21-30P Data carrier IQC21-50P Data carrier IQC21-58 Data carrier IQC33-20 Data carrier IQC22-C1 Data carrier IQC33-30 Data carrier IQC33-50 Data carrier V1-G-5M-PUR-ABG-V1-W Connecting cable, M12 to M12, PUR ca-
ble 4-pin, shielded V1-G-10M-PUR-ABG-V1-W Connecting cable, M12 to M12, PUR ca-
ble 4-pin, shielded l m x
. g n e _ 1 5 8 7 8 1 t 6 0
-
0 1
-
7 1 0 2
:
e u s s i f o e t a D 4 0
:
3 1 9 1
-
9 0
-
7 1 0 2
:
e t a d e s a e e R l Refer to General Notes Relating to Pepperl+Fuchs Product Information. Pepperl+Fuchs Group www.pepperl-fuchs.com fa-info@us.pepperl-fuchs.com USA: +1 330 486 0001 Germany: +49 621 776 4411 fa-info@de.pepperl-fuchs.com Singapore: +65 6779 9091 fa-info@sg.pepperl-fuchs.com 1 Read/write head FCC approval IC approval Radio approval This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Caution:
Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is sub-
ject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interfer-
ence that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploita-
tion est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage, et
(2) lutilisateur de lappareil doit accepter tout brouillage radio-
lectrique subi, mme si le brouillage est susceptible den com-
promettre le fonctionnement. USA: FCC IREIQH1F198V1 Canada: IC 7037A-IQH1F198V1 Notes This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec-
tion against harmful interference when the equipment is operated in a commercial environ-
ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. IQH1-F198-V1 l m x
. g n e _ 1 5 8 7 8 1 t 6 0
-
0 1
-
7 1 0 2
:
e u s s i f o e t a D 4 0
:
3 1 9 1
-
9 0
-
7 1 0 2
:
e t a d e s a e e R l 2 Refer to General Notes Relating to Pepperl+Fuchs Product Information. Pepperl+Fuchs Group www.pepperl-fuchs.com fa-info@us.pepperl-fuchs.com USA: +1 330 486 0001 Germany: +49 621 776 4411 fa-info@de.pepperl-fuchs.com Singapore: +65 6779 9091 fa-info@sg.pepperl-fuchs.com