FCC ID: IREIQR3FP RFID Reader

Module Integration Guide HF RFID Reader Module

#70152029 PH RADIO MODULE IQR3-FP FCC ID: IREIQR3FP IC ID: 7037A-IQR3FP CONFIDENTIAL acc. to ISO 16016 Only valid as long as released in EDM!

Module Integration Guide for #70152029 Mannheim template: FTM-0027B scale:

respons date: 2023-03-31 14-4772A DF.MSH sheet 1 of 11 Released EDM checkout 2023-MRZ-31 Table of Contents ........................................................................................................................... 1 General Description .................................................................................................................................... 3 1.1 Module description ............................................................................................................................. 3 1.2 Module features ................................................................................................................................. 3 1.3 1.4 Qualified personnel ............................................................................................................................ 3 Environmental conditions ................................................................................................................... 3 1.5 Module components .......................................................................................................................... 4 Interfacing of module ......................................................................................................................... 5 1.6 1.7 Labeling ............................................................................................................................................. 5 1.8 Mounting module inside host ............................................................................................................. 5 1.8.1 PCB outline of module for host integration .................................................................................... 5 1.8.2 Position of host interface connector............................................................................................... 5 2 Electrical characteristics ............................................................................................................................. 6 2.1 Maximum Ratings .............................................................................................................................. 6 2.2 2.3 2.4 2.5 Pin definition ...................................................................................................................................... 6 Supply voltage ................................................................................................................................... 7 Data Interface .................................................................................................................................... 7 ESD sensitivity ................................................................................................................................... 7 3 Firmware characteristics ............................................................................................................................ 8 Description of air interface ................................................................................................................. 8 3.1 3.2 3.3 Indicator Elements ............................................................................................................................. 8 Available UART commands and parameters .................................................................................... 8 3.4 Special test modes needed for certification ....................................................................................... 8 4 FCC Regulatory Information ....................................................................................................................... 9 4.1 4.2 User Guide Requirements ................................................................................................................. 9 Labeling Requirements ...................................................................................................................... 9 4.3 Approved Antennas ........................................................................................................................... 9 IC Regulatory Information ........................................................................................................................ 10 5 5.1 5.2 User Guide Requirements ............................................................................................................... 10 Labeling Requirements .................................................................................................................... 10 5.3 Approved Antennas ......................................................................................................................... 10 6 Change history ......................................................................................................................................... 11 CONFIDENTIAL acc. to ISO 16016 Only valid as long as released in EDM!

Module Integration Guide for #70152029 Mannheim template: FTM-0027B scale:

respons date: 2023-03-31 14-4772A DF.MSH sheet 2 of 11 Released EDM checkout 2023-MRZ-31 1 General Description 1.1 Module description The module operates in the 13.56MHz HF frequency range and is optimized for use in industrial applications involving high distances. The device reads and writes passive tags in line with ISO 15693. The module can be used in the United States and Canada. The module is compliant with the relevant transmission regulations. The user can add LEDs to monitor the status of the module. The module has a typical detection range of around 30cm. This range is determined by the tag used and can be adjusted by configuring the transmission power. Other range influencing factors include the transponder size, the setup and installation of the specific application and the surrounding materials, particularly metal. For the actual read and write distances under real conditions, the combination of module and tag must be tested in the desired application. The radio module can be interfaced to various industrial busses by host product. 1.2 Module features Integrated coil antenna (magnetic near field)

- Flexible HF read/write module with high distance detection range

- Multi-tag reading of up to 20 tags ensures increased productivity

- Provides simple interface for host products 1.3 Qualified personnel Only appropriately trained and qualified personnel may carry out mounting, installation, commissioning, operation, maintenance, and dismounting of the product. The personnel must have read and understood the instruction manual and the further documentation. Prior to using the product make yourself familiar with it. Read the document carefully. 1.4 Environmental conditions Operating or storing the module outside the specified range may damage the module. Also this could lead to incorrect operation of desired module functionality. To reach full temperature range a potting will be needed for end product, which allows better cooling of electronic. Table 1 Environmental operating conditions Absolute maximum rating Operation temperature (with non-transmission periods) Operation temperature (Continuous transmission mode) Storage temperature Value

-25 ... +70C

-25 ... +55C

-40 ... +85C CONFIDENTIAL acc. to ISO 16016 Only valid as long as released in EDM!

Module Integration Guide for #70152029 Mannheim template: FTM-0027B scale:

respons date: 2023-03-31 14-4772A DF.MSH sheet 3 of 11 Released EDM checkout 2023-MRZ-31 1.5 Module components The radio module consist of 2 assembled PCBs with the electronic components and integrated coil antenna. On the electronics PCB are multiple shields used to cover RF sensitive parts. The host system is connected via 2x8Pin connector. Additional LEDs may be connected to module for visualization of module state. Figure 1 stack up of radio module CONFIDENTIAL acc. to ISO 16016 Only valid as long as released in EDM!

Module Integration Guide for #70152029 Mannheim template: FTM-0027B scale:

respons date: 2023-03-31 14-4772A DF.MSH sheet 4 of 11 Released EDM checkout 2023-MRZ-31 1.6 Interfacing of module The interfacing of module is made in host product, which provides the typical 24V supply to the module. Also the digital interface of RFID reader is interfaced via serial interface at CMOS Levels. The housing of module is designed to be able to contain the host product as well and a variable amount of external connectors. 1.7 Labeling Figure 2 labeling of module The labeling of the module is applied on the shielding of module. 1.8 Mounting module inside host 1.8.1 PCB outline of module for host integration A 3D model of module can be requested by module integrator under a non-disclosure agreement. 1.8.2 Position of host interface connector A 3D model of module containing position of interface connector can be requested by module integrator under a non-disclosure agreement. CONFIDENTIAL acc. to ISO 16016 Only valid as long as released in EDM!

Module Integration Guide for #70152029 Mannheim template: FTM-0027B scale:

respons date: 2023-03-31 14-4772A DF.MSH sheet 5 of 11 Released EDM checkout 2023-MRZ-31 2 Electrical characteristics 2.1 Maximum Ratings Table 2 Electrical operating conditions maximum ratings Supply voltage All digital interfacing signals 2.2 Pin definition Value typical 24V DC, range of 8 33V DC (absolute maximum) 3.3V LVCMOS Figure 3 Pinning of module to host connection Table 3 Pinning of module to host connection Provide supply here 8 33V DC Direction Bidirectional GROUND Usage host Bidirectional GROUND To host Bidirectional GROUND Pin Usage radio module GROUND 1 Supply voltage into module To module 2 GROUND 3 5V supply output 4 GROUND 5 Reserved 6 GROUND 7 UART 8 GROUND 9 10 UART direction 11 GROUND 12 UART 13 GROUND 14 RESET input 15 GROUND 16 3V3 supply output Bidirectional GROUND To module Bidirectional GROUND To host Bidirectional GROUND To host Bidirectional GROUND To module Bidirectional GROUND To host max 100mA supply for host DO NOT CONNECT Serial data from host to module Low = RX/ High = TX is active Serial data from module to host Pull to low level, to reset module max 50mA supply for host Level 5V 3.3V LVCMOS 3.3V LVCMOS 3.3V LVCMOS 3.3V LVCMOS 3.3V CONFIDENTIAL acc. to ISO 16016 Only valid as long as released in EDM!

Module Integration Guide for #70152029 Mannheim template: FTM-0027B scale:

respons date: 2023-03-31 14-4772A DF.MSH sheet 6 of 11 Released EDM checkout 2023-MRZ-31 2.3 Supply voltage Nominal power supply voltage is 24 VDC; voltage range is 8 ... 33 VDC (absolute maximum). Supply must be SELV (Safety Extra Low Voltage). The current consumption is <=700mA at nominal voltage 24 VDC. The average power consumption is <=5W. 2.4 Data Interface UART interface is used for module configuration and RFID data transfer. 2.5 ESD sensitivity The digital interfacing signals must be protected against electro static discharge on host side, if made available to end user. CONFIDENTIAL acc. to ISO 16016 Only valid as long as released in EDM!

Module Integration Guide for #70152029 Mannheim template: FTM-0027B scale:

respons date: 2023-03-31 14-4772A DF.MSH sheet 7 of 11 Released EDM checkout 2023-MRZ-31 3 Firmware characteristics 3.1 Description of air interface For detailed information about the air interface protocol please refer to ISO15693-3 and ISO15693-2. 3.2 Indicator Elements The module has option to connect 4 LEDs. The basic indicators denote:

Green LED: Power on Blue LED: Transmission mode Yellow LED: Read/write operation successful Red LED: Error state 3.3 Available UART commands and parameters The full command and parameter set can be requested under a non-disclosure agreement. 3.4 Special test modes needed for certification For certification a firmware including test modes can be requested by test laboratory under a non-disclosure agreement. This firmware will not be available for end user. CONFIDENTIAL acc. to ISO 16016 Only valid as long as released in EDM!

Module Integration Guide for #70152029 Mannheim template: FTM-0027B scale:

respons date: 2023-03-31 14-4772A DF.MSH sheet 8 of 11 Released EDM checkout 2023-MRZ-31 4 FCC Regulatory Information 4.1 User Guide Requirements FCC Information This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Notice To comply with FCC part 15 rules in the United States, the system must be professionally installed to ensure compliance with the Part 15 certification. It is the responsibility of the operator and professional installer to ensure that only certified systems are deployed in the United States. The use of the system in any other combination (such as co-located antennas transmitting the same information) is expressly forbidden. FCC Exposure Information This equipment complies with FCC and ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet quipement est conforme aux limites d'exposition aux rayonnements ISED tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Ce transmetteur ne doit pas etre place au meme endroit ou utilise simultanement avec un autre transmetteur ou antenne. Warning!

Malfunctions with pacemakers This device does not exceed the permissible limits for electromagnetic fields. Maintain a minimum distance of 30 cm between the device and your pacemaker. Inadequate distance from the transmitter antenna can result in inhibitions, reprogramming, or incorrect stimulation pulses. 4.2 Labeling Requirements Contains FCC ID: IREIQR3FP 4.3 Approved Antennas Only module internal antenna can be used. CONFIDENTIAL acc. to ISO 16016 Only valid as long as released in EDM!

Module Integration Guide for #70152029 Mannheim template: FTM-0027B scale:

respons date: 2023-03-31 14-4772A DF.MSH sheet 9 of 11 Released EDM checkout 2023-MRZ-31 5 IC Regulatory Information 5.1 User Guide Requirements IC Information This device complies with Industry Canada license exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause interference, and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. IC Exposure Information This equipment complies with FCC and ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet quipement est conforme aux limites d'exposition aux rayonnements ISED tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Ce transmetteur ne doit pas etre place au meme endroit ou utilise simultanement avec un autre transmetteur ou antenne. Warning!

Malfunctions with pacemakers This device does not exceed the permissible limits for electromagnetic fields. Maintain a minimum distance of 30 cm between the device and your pacemaker. Inadequate distance from the transmitter antenna can result in inhibitions, reprogramming, or incorrect stimulation pulses. Dysfonctionnement du stimulateur cardiaque Cet appareil ne dpasse pas les limites admissibles pour les champs lectromagntiques. Maintenez une distance minimale de 30 cm entre l'appareil et votre stimulateur cardiaque. Si la distance la tte de metteur est trop courte, des impulsions d'inhibition, de reprogrammation ou de stimulation incorrecte peuvent se produire. 5.2 Labeling Requirements Contains IC: 7037A-IQR3FP 5.3 Approved Antennas Only module internal antenna can be used. CONFIDENTIAL acc. to ISO 16016 Only valid as long as released in EDM!

Module Integration Guide for #70152029 Mannheim template: FTM-0027B scale:

respons date: 2023-03-31 14-4772A DF.MSH sheet 10 of 11 Released EDM checkout 2023-MRZ-31 6 Change history Version 14-4772 14-4772A Date 2023-01-03 2023-03-31 Author Martin Schmitt Martin Schmitt Remarks Initial released version Updated exposure Information CONFIDENTIAL acc. to ISO 16016 Only valid as long as released in EDM!

Module Integration Guide for #70152029 Mannheim template: FTM-0027B scale:

respons date: 2023-03-31 14-4772A DF.MSH sheet 11 of 11 Released EDM checkout 2023-MRZ-31

plate number 10-D6H9 /

fmt 10-D6H9 /

cab print laser sticker X CONFIDENTIAL acc. ISO 16016 Only valid as long as released in EDM!

scale: 1:1/2:1 date: 2022-Dec-08 Mannheim type label PH RADIO MODULE IQR3-FP #70152029 respons. 10-D6H9 DF.KD sheet 1 of 1 Released EDM checkout 2022-DEZ-13

fa PEPPERL+FUCHS SENSING YOUR NEEDS Pepperl+Fuchs Inc. Date: 27th Feb 2023 Attestation Statement according to 2.911(d)(5)(i) and 2.911(d)(5)(ii) Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Attestation Statement according to 2.911(d)(5)(i) and 2.91 1(d)(5)(ii) FCC ID: IREIQR3FP TO WHOM IT MAY CONCERN:

Hereby we certify that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Further we certify that, as of the date of the filing of the application, Pepperl+Fuchs Inc. is not identified on the Covered List as an entity producing covered equipment. Sincerely, 1600 Enterprise Parkway TWINSBURG, OH 44087-2245 H Mores a PEPPERL + FUCHS

(signature & company stamp) Pepperl+Fuchs Inc. 1600 Enterprise Parkway OH 44087 Twinsburg USA Helmut HORNIS

+1 (330) 486-0148 hhornis@us.pepperl-fuchs.com Page 1 of 1

FaPEPPERL+FUCHS SENSING YOUR NEEDS Pepperl+Fuchs Inc. Date: 27th Feb 2023 Attestation Statement according to 2.911(d)(7) Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Attestation Statement according to 2.911(d)(7) FCC ID: IREIQR3FP TO WHOM IT MAY CONCERN:

We, Pepperl+Fuchs Inc. designate Pepperl+Fuchs Inc., to act as U.S. agent for service of process. Pepperl+Fuchs Inc. with FCC Registration Number (FRN) 0005824040 hereby acknowledges the obligation of the U.S. agent for service of process. Further Pepperl+Fuchs Inc. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Sincerely, Ue Lorn PEPPERL + FUCHS 1600 Enterprise Parkway

(signature & company stamp) TWINSBURG, OH 44087-2245 Pepperl+Fuchs Inc. 1600 Enterprise Parkway OH 44087 Twinsburg USA Helmut HORNIS

+1 (330) 486-0148 hhornis@us.pepperl-fuchs.com Page 1 of 1

Pepperl+Fuchs Inc. Date: 13th Dec 2022 Radio Module usage declaration Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 Certification and Engineering Bureau Industry Canada Spectrum Engineering Branch 3701 Carling Avenue, Building 94 Ottawa, Ontario K2H 8S2 Subject:

FCC ID:

FCC / ISED Module Usage Statement IREIQR3FP IC Company Number:

UPN:

HVIN:

PMN:

7037A IQR3FP IQR3FP IQR3FP TO WHOM IT MAY CONCERN We herewith declare the radio module will only be used in our own end products and the radio module itself will not be sold to any third party separately. Best Regards, Pepperl+Fuchs Inc. 1600 Enterprise Parkway OH 44087 Twinsburg Helmut HORNIS Signature: Date: 12/13/2022 14-4781 Page 1 of 1

LONG-TERM CONFIDENTIALITY REQUEST for Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 TO WHOM IT MAY CONCERN Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we request Long-Term Confidentiality for the following product:

Grantee Code Equipment Product Code Check your GC here. Click Grantee Search. FCC ID:

For the product stated above, we request Long-Term Confidentiality for exhibits which contain Block Diagram, Operational Description, Parts List/Tune Up Info, Schematics, SDR Software/Security Info. The above exhibits contain our benefit to our competitors. This information will not be publicly available. trade secrets and proprietary information If you have any questions, please feel free to contact us at the address shown below. Sincerely, Company Name:

Company Address:

Contact Name:

Signature:

Phone:

Fax:

E-mail:

Signature Date:

that could be of Document Version 1.1 2020-10-30

RSP-100, Issue 12, August 2019 Modular Approval Attestation Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 Certification and Engineering Bureau Innovation, Science and Economic Development Canada Spectrum Engineering Branch 3701 Carling Avenue, Building 94 Ottawa, Ontario K2H 8S2 Subject: FCC / ISED Modular Approval Statement Grantee Code Equipment Product Code Check your GC here. Click Grantee Search. Check your CN here. FCC ID:

CN:

(Company Number) HVIN:

(Hardware Version Id. Number) HMN:

(Host Marketing Name) UPN:

(Unique Product Number) PMN:

(Product Marketing Name) FVIN:

(Firmware Version Id. Number) TO WHOM IT MAY CONCERN Pursuant to Paragraphs RSP-100, Issue 12 and CFR 15.212, we herewith declare for our module. Modular approval requirement

(a) The radio elements shall have the radio frequency circuitry shielded. Physical/discrete and tuning capacitors may be located external to the shield, but shall be on the module assembly. Yes No *

*Please provide a detailed explanation if the answer is No.:

(b) If the module has modulation/data input(s), they shall be buffered in order to ensure that the module will comply with the requirements set out in the applicable Radio Standards Specification (RSS) and Part 15 under conditions of excessive data rates or over-modulation.

*Please provide a detailed explanation if the answer is No.:

(c) The module shall have its own power supply regulation on the module itself. This is to ensure that the module will comply with the requirements set out in the applicable standard regardless of the design of the power supplying circuitry in the host product that houses the module.

*Please provide a detailed explanation if the answer is No.:

(d) The module shall comply with the provisions for external power amplifiers and antennas detailed in the applicable RSS and rule part. The equipment certification application shall contain:

i. a detailed description of the configuration of highest antenna gain for each type of transmitting antenna for licence-exempt modules;

ii. the maximum transmitting antenna gain for licence modules; and iii. a detailed description of the configuration of lowest antenna gain for each type of receiving antenna for Dynamic Frequency Selection

(DFS) modules with removable antenna(s).

*Please provide a detailed explanation if the answer is No.:

Modular approval requirement

(e) The module shall be tested for compliance with the applicable standard in a stand-alone configuration

(i.e. the module shall not be inside another product during testing). Yes No *

*Please provide a detailed explanation if the answer is No.:

(f) The module complies or will comply with applicable RSS-102 exposure requirements and any applicable FCC RF exposure requirement (1.1307(b), 1.1310, 2.1091, and 2.1093) in its intended configuration/integration in a host.

*Please provide a detailed explanation if the answer is No.:

(g) The module must be labeled with its permanently affixed label (indicating ISED certification number, HVIN and FCC identifier), or use an electronic display (see KDB Publication 784748 and RSP-100, section 5).

*Please provide a detailed explanation if the answer is No.:

(h) The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee.

*Please provide a detailed explanation if the answer is No.:

(i) (Only applicable for FCC) The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b). For further information concerning antenna connectors see: DA-00-1087.

*Please provide a detailed explanation if the answer is No.:

If you have any questions, please feel free to contact us at the address shown below Best regards, Company Name:

Company Address:

Contact Name:

Signature:

Phone:

Fax:

E-mail:

Signature Date:

INFO for applicant: Limited Modolar Approval (LMA) may be granted when one or more of the requirements in the table above cannot be demonstrated. LMA will also be issued in those instances where applicants can demonstrate that they will retain control over the final installation of the device, such that compliance of the end product is assured. In such cases, an operating condition on the LMA for the module must state that the module is only approved for use when installed in devices produced by a specificmanufacturer. When LMA is sought, the application for equipment certification must specifically state how control of the end product, into which the module will be installed, will be maintained, such that full compliance of the end product is always ensured. Document Version 2.1 2020-10-30