BT-501 BT-501 BT-501 BT-501 Car Kit Car Kit EARPIECES B- VOLUME(-) MUTE ON BT-501 LED C- POWER ASSOCIATION D- ANSWER AND END BUTTON POWER JACK A- VOLUME (+) MUTE OFF Car Kit BT-501 Car Kit Car Kit BT-501 Car Kit Car Kit Car Kit Car Kit BT-Headsetfree BT-501 BT-501 BT-501 Mute function During a conversation, press the B button for 3 seconds to activate "Mute" mode. To deactivate it, press for 3 seconds the A button. BT-501 Car Kit Car Kit BT-501 Car Kit BT-501 Car Kit Car Kit BT-501 Car Kit BT-501 Car Kit Press the C button twice. Press the D button once. Car Kit Do not use the device during charging. BT-501. Car Kit Car Kit The fully charged battery has power for to 8 hours of talktime, up to hours of 120 standbtime. However, the times may vary when used with different mobile phones or other compatible Bluetooth devices, usag settings, usage styles, and environments. Leaving the device in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15 C and 25 C
(59 F and 77 F). A device with hot or cold temporarily, even battery may not work when the battery is fully charged. Battery performance in temperatures well below freezing. particularly limited is Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Operation is subject to the following two conditions:
1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.