Smart Pet Feeder Light SE User Instructions Before using this product, please read the instructions in this manual thoroughly. 9=HECI
Please use this device indoor. Do NOT place it under direct sunlight. Please keep away from fire sources. Do NOT put objects or items other from pet food into the barrel in case of device error or mistaken by pet. Please make sure the power cord is in place and will not be trampled, tripped, bite or damaged to avoid electric shock and other emergencies. The device body is NOT to be washed or soaked by water. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. This appliance must only be supplied at safety extralow voltage corresponding to the marking on the appliance.
)JJAJE
The device is suggested to be placed at a corner or against a wall to avoid tackled by pet. Do NOT disassemble, modify or repair this product by your own, otherwise all warranty and service rights will be waived. This product is suitable for dry pet food up to 16mm in diameter. Do NOT put in wet food so as not to cause blocking of the outlet channel or components damages. Shape and density of pet food may effect the actual capacity of the barrel; The amount of grain of each serving may vary from different grain density also. If there is any travel arrangement, please install dry batteries into the product in advance in case any power failure at home happens when you are away. 2-6)48-FEEDING SERIES 01
.++9=HEC5J=JAAJ
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement:
1.This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. The device has been evaluated to meet general RF exposure requirement. 2-6)48-FEEDING SERIES 02
JA
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. 2-6)48-FEEDING SERIES 03 Product Introduction Upper Cover Stainless Steel Barrel Indicator Light Manual Button Grain Outlet Food Bowl
=K=*KJJ
Manual feeding: Click the button two times to outlet 2 servings of grain. Device Untethering: Long press the button for 7 seconds. 2-6)48-FEEDING SERIES 1@E?=JHECDJ
White ashing: network unpaired White on: device functioning Yellow on: lack of grain Red on: grain stuck or device error Red ashing: battery low 04 2=?=CEC+JAJI
JA
After opening the package, please ensure that the product is intact and compare the accessories with the diagram below to confirm their completeness. Due to ongoing product updates and iterations, some accessories may undergo adjustments. Please refer to the actual items for accuracy. 2AJ.AA@AH*@O
5J=EAII5JAA*=HHA
E?K@AI=>=HHADA=@
.@*M
DO NOT EAT DFSICCANT SILICAGEL DFSICCANT DO NOT EAT DFSICCANT 7IAH=K=
7I>?=>A
,AIE??=J
2-6)48-FEEDING SERIES 05 Instruction
+A?JJDAFMAH=@=FJAH Connect the power adapter to the power interface at the bottom of the device, then plug it into the socket.Once you hear a short beep, the device has been successfully powered on.
AJMH?BECKH=JE
Scan the QR code shown in the illustration, or search for "Dipet life" on the App Store/Google Play Store to download the app and register/login. Connect your phone to a 2.4GHz WiFi network; 5GHz frequency band and WiFi networks requiring special authentica-
tion (such as those in hotels or airports) are not supported. (Please note to avoid special characters in the WiFi name to prevent interference during network configuration.) Download "Dipet Life" App 2-6)48-FEEDING SERIES 06 Scan to view tutorials Open the "Dipet life" app, bring your phone close to the device, and follow the app's prompts to search for and add the device. Then, proceed with the network configuration process as guided on the interface. Scan the QR code in the illustration for a tutorial. Please ensure that your phone's Bluetooth and location permissions are enabled. Once the network configuration is successful, the device indicator light will be solid white. If the network configuration fails, please patiently retry the process. Double-check if the WiFi password is entered correctly, and if the issue persists after multiple attempts, please contact customer support for assistance. After completing the above steps, the relevant functions of the smart feeder can be used normally. For more app-based remote interaction and visual features, make sure the device is connected to the network first and then experience them on the app. 2-6)48-FEEDING SERIES 07
=K=.AA@,EIFAIEC 2 Rapidly press the device's Manual Button twice, and the device will dispense 2 servings of feed.
+DE@?
Activation: Enable the child lock on the device control page within the app. Once activated, the device's Manual Button will be locked. Deactivation: After powering off the device and turning it back on, the device's Manual Button will be unlocked. Alternatively, deactivate the child lock on the device control page within the app. Once deactivated, the device's Manual Button will be unlocked.
*=JJAHO4AF=?AAJ Open the bottom battery cover and replace with four new AAA batteries. 2-6)48-FEEDING SERIES 08
,AIIE?=J4AF=?AAJ Open the desiccant box and remove the used desiccant packet. Take a new desiccant packet and place it inside the box. Cover the box and put the top cover back in place. It is recommended to replace the desiccant packet every 1-3 months. DO NOT EAT DFSICCANT SILICAGEL DFSICCANT DO NOT EAT DFSICCANT 2AJ.@)@@EJE
The device will automatically check if there is enough pet feed in the storage barrel. If it's insufficient, the indicator light will stay orange. Open the top cover to add pet feed to the storage barrel. 2-6)48-FEEDING SERIES 09 Maintenance
+A=ECB5J=EAII5JAA
*=HHA
The stainless steel barrel can be removed for wiping or washing with water. After air-drying, it can be placed back for use.
+A=ECB.AA@*M
Due to the attachment of food residues leading to bacterial growth, we recommend cleaning the feed bowl once every 3 days. After removing the feed bowl, wipe or wash it with water, let it air-dry, and then put it back for use. 2-6)48-FEEDING SERIES 10 Product Specifications Product Name: Smart Pet Feeder [Light SE]
Product Model: NFSFE32A Main Material: ABS, SUS304, Porcelain Capacity: 2.8L Product Size: 340*200*355mm N.W.: 2.1kg Connect Method: Wi-Fi (2.4GHz) Input: 5V 2A Product Grade: Qualified This product contains a wireless transmitter module with the approval code of CMIIT ID: 2020DP2713. 2-6)48-CARE SERIES 11 9=HH=JO6AHI Dear customers, thank you for purchasing this product, please read the below warranty terms carefully before using:
JD9=HH=JOEBAJEA+KIJAH5KFFHJ Only apply to eligible purchases made directly from the Pet Marvel authorized distributors. Warranty coverage applies to the original owner and the original product only. And is not transferable. The following conditions are not covered by the warranty:
Any malfunction or defect caused by improper use of environment or conditions;
Any fault or defect caused by improper installation, misuse, unauthorized maintenance, force majeure events, or other external reasons;
Any fault or defect caused by the use of non-original fittings or accessories;
The product has exceeded the warranty period;
Other failures or damages caused by none of the product design, technology, manufacturing process, or quality problems;
Normal fading, wear and tear, or consumption during the use of the product;
Not able to provide a valid purchase certificate. HM=HH=JOIAHLE?A=@HAEBH=JEFA=IACAJEJK?DLE=
-=EIAHLE?A(FAJ=HLA?
2-6)48-FEEDING SERIES 12 Note: Pictures on this brochure are for reference only, and the product is subject to the real object.