FCC ID: O3M9290002579X LED lamp

PERSONAL WIRE LESS LIGH TING Please go to www.meethue.com to learn more about hue and how to use it. FCC ID bridge: EW780891300 FCC ID lamp: O3M9290002265X EN This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Pour en savoir plus sur le systme hue et son utilisation, visitez le site www.meethue.com. ID FCC de la passerelle: EW780891300 ID FCC de lampoule: O3M9290002265X FR Cet appareil est conforme l'alina 15 de la rglementation de la FCC et la norme CNR-210 d'Industrie Canada. Son fonctionnement est assujetti aux deux conditions suivantes : (1) l'appareil ne doit pas causer d'interfrences nuisibles; (2) l'appareil doit accepter toute interfrence reue, y compris les interfrences qui peuvent causer un fonctionnement non dsir. IC Certication:

- LED lamp: company number: 10469A, UPN: 2265X.

- ZigBee IP bridge: company number: 1135B, UPN:

80891300. This Class B digital apparatus complies with Canadian ICES-003. This digital apparatus does not exceed the class B limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. NOTICE: Changes or modications made to this device not expressly approved by Philips Lighting Company (USA) and Philips Electronics Ltd (Canada)

(collectively Philips) may void the U.S. FCC and Canadian authorization to operate this device. Certication IC :

- Lampe DEL: numro de lenrtreprise: 10469A, NUP: 2265X.

- Passerelle IP ZigBee : numro de lenrtreprise: 1135B, NUP: 80891300 Cet appareil numrique de la classe B est conforme la norme canadienne NMB-003. Cet appareil numrique ne dpasse pas les limites applicables aux quipements de classe B en termes d'missions de bruit radiolectrique, telles que dnies par le Rglement sur le brouillage radiolectrique tabli par le Ministre des Communications du Canada. AVIS : les modications apportes cet appareil sans avoir t explicitement approuves par Philips Lighting Company (tats-Unis) et Philips Electronics Ltd

(Canada) (collectivement Philips) peuvent annuler l'autorisation d'utilisation de cet appareil octroye par la FCC aux tats-Unis et par Industrie Canada. The advanced interface module complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modica-

tions to this equipment. Such modications could void the user's authority to operate the equipment. This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna Increase the separation between the device and receiver Connect the device into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/television technician for help WARNINGS AND CAUTIONS:

The bulb is suitable for use in open luminaries

(xtures). The bulb is not suitable for totally enclosed xtures. The bulb is not intended for use with emergency exit

xtures or emergency lights. The bulb is not compatible with photo controls, occupancy sensors, or timing devices unless specically designed for hue. The bulb is not suitable for use with dimmers. The bulb is not suitable for use with dimmers. Risk of electric shock Do not use device where directly exposed to water. Before replacing, turn off power and let the bulb cool to avoid electrical shock or burn. The device is for indoor use only. Do not use the device in wet locations, e.g. bathrooms or outdoors. OPERATING INSTRUCTIONS:

This device is not a toy designed to be played with by children. Do not place the device on hot surfaces. For safety reasons, do not open device, which will also void the warranty. Only use the adaptor supplied; using a different adaptor can damage the device. Use the bulb only in a socket rated for this bulb. LIMITED WARRANTY:

Philips warrants that this device will be free from defects in material and workmanship and will operate for 2 years based on up to 3 hours average usage per day/7 days per week, when used as directed. If this device does not conform to the warranty, Philips will send you, at its election, a replacement device or refund your original purchase price upon receipt of the returned device, register receipt and proof of purchase. Please call our toll-free number 1-800-555-0050, write to Philips

(address indicated on the packaging) or send an email at the website www.philips.com to nd out how to return the device. This limited warranty does not cover devices subject to accident, neglect, abuse, misuse or acts of God. REPLACEMENT OR REFUND IS YOUR SOLE REMEDY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES ARE LIMITED IN DURA-

TION TO THE DURATION OF THIS WARRANTY. LIABILITY FOR INCIDENTAL OR CONSEQUEN-

TIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED. Some states and provinces do not allow exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specic legal rights, and you may also have other rights which vary from state to state and province to province. CLEANING AND MAINTENANCE:

Do not clean the device when it is on and connected to the power supply. To avoid scratching the device, clean only with a soft dry cloth. Do not use cleaning agents to clean the device. Manage in accordance with disposal laws in your area. Hue Personal Wireless Lighting is a trademark owned by Koninklijke Philips Electronics N.V. Wireless Specication:

Wireless RF mode frequency band: 2400~2483.5 MHz Wireless communications protocol: IEEE 802.15.4 Operating channels: channels 11 26 Environmental specication:

Temperature (operation): 0-35 C Temperature (Storage): -25-60 C Relative humidity: 5-95 % non condensing Standby power: 0.45 W per lamp Cet quipement est conforme aux limites dexposition la radiation FCC prsentes pour un environnement libre. Cet quipement doit tre install et exploit avec une distance minimale de 20 cm entre le radiateur et votre corps. Philips n'est pas responsable pour des interfrences nuisibles dans les communications radiolectriques si l'quipement nest pas install ou utilis conformment au mode demploi. lissue des tests dont il a fait lobjet, cet quipement a t dclar conforme la section15 de la rglementationFCC applicable aux appareils numriques de classeB. Ces limites sont conues pour fournir installations rsidentielles. Cet quipement gnre, utilise et peut mettre des ondes radiolectriques. Il est susceptible de crer des interfrences nuisibles dans les communications radiolectriques sil nest pas install ou utilis conformment au mode demploi. Cependant, labsence dinterfrences dans une installation particulire nest pas garantie. Dans le cas o cet quipement crerait des en teignant et en rallumant lappareil, il est conseill dessayer de corriger ces interfrences en appliquant une ou plusieurs des mesures suivantes:

dplacer lantenne de rception;

augmenter la distance entre lquipement et le rcepteur;

raccorder lquipement une prise de courant situe sur un circuit diffrent de celui sur lequel le rcepteur est connect;

prendre conseil auprs dun distributeur ou dun technicien radio/TV AVERTISSEMENTS ET MISES EN GARDE :

Cette ampoule peut tre utilise dans des luminaires ouverts. Cette ampoule n'est pas adapte aux luminaires totalement ferms. Cette ampoule n'a pas t conue pour tre utilise dans des lampes de sortie d'urgence. Cette ampoule n'est pas compatible avec les interrupteurs photo-lectriques, les dtecteurs de prsence, ni les minuteries, moins que ces systmes n'aient t spciquement conue pour elle. Cette ampoule n'est pas adapte aux variateurs. Risque de choc lectrique Ne pas utiliser l'appareil s'il est directement expos l'eau. Avant de changer l'ampoule, teignez l'appareil et laissez-la refroidir pour viter de vous brler ou de subir un choc lectrique. Cet appareil est conu pour une utilisation en intrieur seulement. N'utilisez pas l'appareil dans des lieux humides, par exemple la salle de bain ou l'extrieur. INSTRUCTIONS D'UTILISATION :

Cet appareil n'est pas un jouet et ne doit pas tre utilis par des enfants. Ne posez pas l'appareil sur des surfaces chaudes. Par mesure de scurit et pour ne pas perdre le bnce de la garantie, n'ouvrez pas l'appareil. Utilisez l'adaptateur fourni seulement. Si vous en utilisez un autre, vous pourriez endommager l'appareil. Utilisez uniquement l'ampoule dans une douille adapte. GARANTIE LIMITE :

Philips garantit que cet appareil sera exempt de dfauts matriels et de main-d'uvre et fonction-

nera pendant 2 ans, sur la base d'une utilisation quotidienne moyenne de 3 heures, raison de 7 jours par semaine, conforme aux directives. En cas de non respect de la garantie par cet appareil, Philips vous fera parvenir, son entire discrtion, un appareil de remplacement ou le remboursement de votre achat aprs rception de l'appareil dfectueux et d'une preuve d'achat. Pour savoir comment, renvoyer votre appareil, composez notre numro sans frais 1 800 555-0050, crivez-nous l'adresse du site Philips gurant sur l'emballage ou envoyez-

nous un courriel sur le site Web www.philips.com. Cette garantie limite ne couvre pas les accidents, la ngligence, l'utilisation abusive ou inapproprie, ni les cas de force majeure. LE REMPLACEMENT OU LE REMBOURSEMENT CONSTITUENT VOS SEULS RECOURS. LEXCLUSION DES CONDITIONS INTERDITES PAR LES LOIS EN VIGUEUR, TOUTE GARANTIE TACITE EST LIMITE LA DURE DE LA PRSENTE GARANTIE. TOUTE RESPONSA-

BILIT POUR DOMMAGE INDIRECT OU CONSCUTIF EST DONC EXPRESSMENT EXCLUE. Certains tats et provinces ne permettant pas l'exclusion des dommages indirects ou conscutifs, la limitation ou l'exclusion ci-dessus pourrait ne pas s'appliquer vous. Cette garantie vous octroie des droits juridiques spciques et les autres droits dont vous pouvez bncier varient selon les tats et les provinces. NETTOYAGE ET ENTRETIEN :

Ne nettoyez pas cet appareil lorsqu'il est allum et raccord l'alimentation. Pour viter de rayer l'appareil, nettoyez-le l'aide d'un chiffon doux et sec uniquement. N'utilisez aucun produit de nettoyage sur l'appareil. Respectez les lgislations rgissant la mise au rebut dans votre rgion. Hue Personal Wireless Lighting est une marque de commerce appartenant Koninklijke Philips Electronics N.V. Caractristiques sans l :

Bande de frquence pour le mode radiofrquence sans

l :2 400~2 483.5 MHz Protocole de communication sans l :IEEE 802.15.4 Canaux de fonctionnement : canaux 11 26 Caractristique environnementale :

Temprature (fonctionnement) : 0 35 C Temprature (stockage) : -25 60 C Humidit relative : 5 95 % sans condensation Consommation en veille : 0,45 W par ampoule

Notam BR30 13mm 6mm hue BR30 8W 150mA 110-130Vac 50/60Hz Factory Mark A3 Made in China Date Code Font size: 1.5mm height laser mark 5mm Should be centered on the back 5mm Serial No.: ABC123 5mm 8 Font size: 1.3mm height Font size: 1.3mm height 630 Lumens FCC ID: O3M9290002579X IC:10469A-2579X Model: 9290002579 FRONT BACK COLOR: PANTONE DARK GREY 433U 20mm this is a custom laser mark and the heat sink manufacturer should not print it on the heat sink

Philips(China)lnvestment Co.,Ltd No.9,888 Tianlin ,Road,Ming Hang District Shanghai China 01810-1099 Tel:+86-21-24128117 Fax:+86-21-54451520 Request for Class Il Permissive Change FCC ID: 03M9290002579X To: Federal Communication Commission Data: August 20,2013 Please be notified that we, the undersigned, Philips(China)Investment Co.,Ltd. Declare that the reasons for this Class Class Il Permissive Change are as below:

L2 inductor change from 4.7mH to 5mH. C14 Y-cap change from 2.2nF to 4.7nF. Add a new capacitor C18. Lamp housing partly potted. 1 2 3. 4. Package of R2,R3,R4, R6,R7,R8 change from 0805 to 0603. 5 6 Layout of LED board changed: Distance from connection pin to foil on bottom side is enlarged. Please refer to below form for detailed information:

Item Key Components Deviation Remark before after L2 4,.7mMH 5.0mH Change the inductance c14 2.2nF 4.7nF Change the capacitance c18 N/A CER1 1206 NPO Add one capacitor 1KV 150P PMS R R2,R3,R4, R6,R7,R8 0805 0603 Package change Lamp housing Non-potting | Partly potting Improve thermal performance Thank you, Sincerely, Phan.

(signature) Duncan Li/Compliance Engineer Philips(China)Investment Co.,Ltd. Tel:+86-21-24128117 Fax:+86-21-54451520

Philips(China)Investment Co.,Ltd No.9,888 Tianlin ,Road,Ming Hang District Shanghai China 01810-1099 Tel:+86-21-24128117 Fax:+86-21-54451520 Request _for Confidentiality Date: _2013-08-19 Subject: Confidentiality Request for: 03M9290002579X Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit L_] Short Term | Permanent Block Diagrams

] Short Term External Photos

<] Short Term Permanent* Internal Photos

(] Short Term DX] Permanent Operation Description/Theory of Operation

(] Short Term [<]Permanent Parts List & Placement/BOM C1 Short Term L_|Permanent Tune-Up Procedure

["] Short Term DX] Permanent Schematics X] Short Term Test Setup Photos

&X] Short Term [JPermanent* Users Manual

*Note: Insert Explanation as Necessai Philips (China) Investment Co.,Ltd. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 __ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, 1 By: Lbncow Ui Duncan Li

(Signature/Title*) (Print name)

' _ The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting. 022311 -6

Philips(China)Investment Co.,Ltd No.9,888 Tianlin ,Road,Ming Hang District Shanghai China 01810-1099 Tel:+86-21-24128117 Fax:+86-21-54451520 Authority to Act as Agent Date: _2013-08-19 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

Audix Technology (WuJiang)Co.,Ltd. is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 12 months By: bus aa Duncan Li

(Signature) (Print name) Title: Compliance Engineer On behalf of: Philips (China) Investment Co.,Ltd.

(Company Name) Telephone: +86-21-24128117 022311 +6

./01/234456748695:;/93:<=:3>4

!@AB %CDE@C%????F*("""(-GH????

@@+)G+")-G")-!$#""! #" E@C

@AB + A C

I>J/46548695:;/93:<=:3>4./01/23/;4

R(

R KLM:N:34 O P Q,

F SDCF

T SOF

@$U @

!@ UV@ R%??????Q, D??????

??????4WM:=:J24X8M:9<Y4Z9[/23\/93486]^_3;]4?@ACC@

CCCP@D@AB CDAa ab@

D AD@ Cb@ C

W/7\<9/9348695:;/93:<=:3>c4

E@,AAD CADbC@A

b@ DC @D@A

dM673eI/7\48695:;/93:<=:3>c4

E@,A A CAbC@A bC

C???#"???DCCfCQE@g@hP

@CCPC@ @A g

bDACDgOC@ @

A@A gOb @AC@A @@@

+@A g")$#G"-

ijIK45674Z9;1237>48<9<;<4kJJ=:l<3:692c4

@@@ @Ab!

CDDCP,AAbDAPCb@A

! D

OD%

!@S*

($PRE@C@B@C AC CDbAb @D

E@bAD+@$O@$gP DAC@ D C

+@B@C @AAF@ ,C b@A%m QU+Un@$A,DAC @A

@D!,A@ ACCo pqqrsstutvt t

Philips (China) Investment Co.,Ltd. No.9, 888 Tianlin Road, Min Hang District, Shanghai, China. 01810-1099 Tel: +86-21-24128117 Fax: +86-21-54451520 to Act as Agent Date: _2013-6-8 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

Audix Technolo i is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 8-12 months By: Duncan_Li (Signature') WPunconk

(Print name) Title: Compliance Engineer On behalf of: __ Philips (China) Investment Co.,Ltd.

(Company Name) Telephone: +86-21-24128117

' _ Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022311 ~6 No.9, 888 Tianlin Road, Min Hang District, Shanghai, China. 01810-1099 Tel: +86-21-24128636 Fax: +86-21-54451520 Date: _2013-6-8 Subject: Confidentiality Request for: 03M9290002579X Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit

[_] Short Term x] Permanent Block Diagrams EX] Short Term External Photos

>] Short Term (jPermanent*? Internal Photos Short Term &X] Permanent Operation Description/Theory of Operation

[J Short Term K]Permanent Parts List & Placement/BOM CJ Short Term |_|Permanent Tune-Up Procedure Short Term 0] Permanent Schematics X] Short Term Test Setup Photos KX] Short Term [_]Permanent* Users Manual

*Note: Insert Explanation as Necessar Philips (China) Investment Co.,Ltd. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___ 180 __ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB wiil then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: DumcawA Dunean Li

(Signature/Title*) (Print name)

? . The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting. 3. Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022311 -6