Product Information 1 6 Product Information Product Features 200W6
Outstanding front of screen performance
WSXGA, wide format 1680x1050 resolution for sharper display
Fast 16ms response time displays fast moving pictures better
Widest viewing angle up to 176 degree
Dual Input accepts both analog VGA and digital DVI signals
Maximum comfort for maximum productivity
SmartManage provides LAN-based asset management capabilities
Large viewing area for seeing more without scrolling
Screen tilt, swivel and height adjustment for ideal viewing angle
Easy, user friendly plug-and play installation
Multi-function for ultimate convenience
USB port for convenient peripheral connections
Built-in speakers for audio without desktop clutter
Stand-alone audio for efficient net conferencing
Easy plug and play DVI ensures true digital experience RETURN TO TOP OF THE PAGE Technical Specifications*
LCD PANEL Type Screen size Pixel Pitch LCD Panel type Effective viewing area Display Colors SCANNING Vertical refresh rate Horizontal Frequency VIDEO Video dot rate Input impedance
- Video
- Sync TFT LCD 20.1" / 51cm 0.258 x 0.258mm 1680 x 1050 pixels R.G.B. vertical stripe Anti-glare polarizer, hard coated 433.44 x 270.9 mm 8 bits interface (16.7M colors) 56Hz-85Hz 30kHz-93kHz (Analog input) 165 MHz 75 ohm 2K2 ohm file://N:\DFU\Philips\LCD\200W6_V.H620W1\ENGLISH\200W6\product\product.htm 2005-03-16 Product Information 2 6 Input signal levels Sync input signal 0.7 Vpp Separate sync Composite sync Sync on green Sync polarities Positive and negative Video interface AUDIO-IN Input signal level Headphone out signal level Input signal connector Loudspeaker D-Sub (Analog) DVI-D (Digital) 0.7 Vpp 20mW x 2, 32 3.5mm mini jack 4W Stereo Audio (2W/channel RMSx2, 200Hz-12kHz, 4 ohm,THD=10%) Optical characteristics Contrast ratio:
Brightness:
600:1 (typ). 300 cd/m2 (typ.) Peak contrast angle 6 o'clock White Chromaticity:
x: 0.283 y: 0.297 (at 9300K) x: 0.313 y: 0.329 (at 6500K) Viewing Angle:
(C/R>10) Response time Upper >88 (typ.) Lower >88 (typ.) Left >88 (typ.) Right >88 (typ.) 16 ms (typ.)
* This data is subject to change without notice. RETURN TO TOP OF THE PAGE Resolution & Preset Modes Maximum 1680 x 1050 at 75Hz(analog input) 1680 x 1050 at 60Hz(digtal input) Recommended 1680 x 1050 at 60Hz * at DVI digital input 39 user definable modes 15 factory preset modes:
H. freq (kHz) Resolution V. freq (Hz) file://N:\DFU\Philips\LCD\200W6_V.H620W1\ENGLISH\200W6\product\product.htm 2005-03-16 Product Information 3 6 31.469 31.469 31.469 35.000 37.500 35.156 37.879 46.875 48.363 60.023 68.700 63.981 79.976 75.0 65.29 640x350 720x400 640x480 640x480 640x480 800x600 800x600 800x600 1024x768 1024x768 1152x870 1280x1024 1280x1024 1600x1200 1680x1050 70.086 70.087 59.940 67.000 75.000 56.250 60.317 75.000 60.004 75.029 75.000 60.020 75.025 60 60.0 RETURN TO TOP OF THE PAGE Automatic Power Saving If you have VESA DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. The following table shows the power consumption and signaling of this automatic power saving feature:
Power Management Definition VESA Mode Video H-sync V-sync Active Sleep Switch Off ON OFF OFF Yes No
Yes No
Power Used
< 50W
< 1.5W
< 1.5W LED color Green Amber OFF This monitor is ENERGY STAR compliant. As an ENERGY STAR Partner, PHILIPS has determined that this product meets the ENERGY STAR guidelines for energy efficiency. RETURN TO TOP OF THE PAGE file://N:\DFU\Philips\LCD\200W6_V.H620W1\ENGLISH\200W6\product\product.htm 2005-03-16 Product Information 4 6 Physical Specifications Dimension (WxHxD) Weight Tilt / Swivel Power supply Power consumption Temperature Relative humidity System MTBF Cabinet color Altitude 478 x 423.5 x235 mm (incl. Pedestal) 7.6 Kg
-5 ~ 25 / 125 90 240 VAC, 60 - 50 Hz 50 W* (typ.) 5 C to 40 C (operating)
-20 C to 60 C (storage) 20% to 80%
50K hrs (excluding CCFL 40K hrs) 200W6CB: Black 200W6CS: Silver
- storage/shipment
- operating 0 - 40,000 feet (12,192m) 0 - 12,000 feet (3657.6m)
* This data is subject to change without notice.
* Resolution 1680x1050, standard size, contrast max., brightness 50%, 6500 K, full white pattern. Pin Assignment RETURN TO TOP OF THE PAGE 1. The digital only connector contains 24 signal contacts organized in three rows of eight contacts. Signal pin assignments are listed in the following table:
Shield Signal Assignment Pin No. 1 T.M.D.S. Data2-
2 T.M.D.S. Data2+
3 T.M.D.S. Data2/4 4 No connect 5 No connect 6 DDC Clock 7 DDC Data 8 No connect Shield Signal Assignment Pin No. 9 T.M.D.S. Data1-
10 T.M.D.S. Data1+
11 T.M.D.S. Data1/3 12 No connect 13 No connect 14 +5V Power 15 Ground (for +5V) 16 Hot Plug Detect Shield Signal Assignment Pin No. 17 T.M.D.S. Data0-
18 T.M.D.S. Data0+
19 T.M.D.S. Data0/5 20 No connect 21 No connect 22 T.M.D.S. Clock 23 T.M.D.S. Clock+
24 T.M.D.S. Clock-
Shield file://N:\DFU\Philips\LCD\200W6_V.H620W1\ENGLISH\200W6\product\product.htm 2005-03-16 Product Information 5 6 2. The 15-pin D-sub connector (male) of the signal cable:
Pin No. Assignment 9 +5V 10 Logic ground 11 Ground 12 Serial data line (SDA) 13 H. Sync / H+V 14 V. Sync (VCLK for DDC) 15 Data clock line (SCL) Pin No. Assignment 1 Red video input 2 Green video input/SOG 3 Blue video input 4 Ground 5 No connect 6 Red video ground 7 Green video ground 8 Blue video ground RETURN TO TOP OF THE PAGE Product Views Follow the links to see various views of the monitor and its components. Front View Product Description RETURN TO TOP OF THE PAGE Physical Function file://N:\DFU\Philips\LCD\200W6_V.H620W1\ENGLISH\200W6\product\product.htm 2005-03-16 Product Information 6 6 1) Tilt 2) Swivel RETURN TO TOP OF THE PAGE file://N:\DFU\Philips\LCD\200W6_V.H620W1\ENGLISH\200W6\product\product.htm 2005-03-16 Installing Your LCD Monitor 1 2 Installing Your LCD Monitor Front View Product Description To switch monitor's power On and Off Power LED To access OSD menu To adjust the OSD To adjust brightness of the display VOLUME AUTO To adjust the OSD To adjust speaker volume Automatically adjust the horizontal position, vertical position, phase and clock setting RETURN TO TOP OF THE PAGE 1 2 3 4 5 6 7 8 Rear View file://N:\DFU\Philips\LCD\200W6_V.H620W1\ENGLISH\200W6\install\install.htm 2005-03-16 Installing Your LCD Monitor 2 2 1 Kensington anti-thief lock 2 VGA input 3 DVI-D input 4 5 6 7 USB upstream port 8 USB downstream port PC audio input Earphone jack AC power input RETURN TO TOP OF THE PAGE Optimizing Performance
For best performance, ensure that your display settings are set at 1680 x 1050 @60Hz Note: You can check the current display settings by pressing the 'OK'
button once. Go into the Product Information. The current display mode is shown on the item called RESOLUTION.
You can also install the Flat Panel Adjust (FP Adjust) program, a program for getting the best performance out of your monitor. This is included on this CD. Step-by-step instructions are provided to guide you through the installtion process. Click on the link to know more about this program. More about FP_setup04.exe RETURN TO TOP OF THE PAGE file://N:\DFU\Philips\LCD\200W6_V.H620W1\ENGLISH\200W6\install\install.htm 2005-03-16 Regulatory Information 1 2 Federal Communications Commission (FCC) Notice (U.S. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device. To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive moisture. THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS. RETURN TO TOP OF THE PAGE Commission Federale de la Communication (FCC Declaration) Cet quipement a t test et dclar conforme auxlimites des appareils numriques de class B,aux termes de l'article 15 Des rgles de la FCC. Ces limites sont conues de faon fourir une protection raisonnable contre les interfrences nuisibles dans le cadre d'une installation rsidentielle. CET appareil produit, utilise et peut mettre des hyperfrquences qui, si l'appareil n'est pas install et utilis selon les consignes donnes, peuvent causer des interfrences nuisibles aux communications radio. Cependant, rien ne peut garantir l'absence d'interfrences dans le cadre d'une installation particulire. Si cet appareil est la cause d'interfrences nuisibles pour la rception des signaux de radio ou de tlvision, ce qui peut tre dcel en fermant l'quipement, puis en le remettant en fonction, l'utilisateur pourrait essayer de corriger la situation en prenant les mesures suivantes:
Rorienter ou dplacer l'antenne de rception.
Augmenter la distance entre l'quipement et le rcepteur.
Brancher l'quipement sur un autre circuit que celui utilis par le rcepteur.
Demander l'aide du marchand ou d'un technicien chevronn en radio/tlvision. file://N:\DFU\Philips\LCD\200W6_V.H620W1\ENGLISH\200W6\safety\regs\regulat.htm 2005-03-16 Regulatory Information 2 2 Toutes modifications n'ayant pas reu l'approbation des services comptents en matire de conformit est susceptible d'interdire l'utilisateur l'usage du prsent quipement. N'utiliser que des cbles RF arms pour les connections avec des ordinateurs ou priphriques. CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA. RETURN TO TOP OF THE PAGE file://N:\DFU\Philips\LCD\200W6_V.H620W1\ENGLISH\200W6\safety\regs\regulat.htm 2005-03-16