FCC ID: RCSDSS1005 2 way RF Docking Station

 

SJM3152 DSS1005/01 SV Universalfjrrkontroll och dockningsstation fr iPod 164 EL PL

Pilot uniwersalny i podstawka

do odtwarzacza iPod 210

187 RU

CS iPod Univerzlis tvirnyt s dokkol az iPod hasznlathoz HU TR iPod iin evrensel uzaktan

233 256 279 302 www.philips.com/welcome Universal remote and docking cradle for iPod EN DE Universalfernbedienung und Dockingstation fr iPod Tlcommande universelle et station daccueil pour iPod Universele afstandsbediening en basisstation voor de iPod FR NL ES Mando a distancia universal y estacin base para iPod IT Telecomando universal e base de suporte para iPod PT Universal remote and docking cradle for iPod 3 26 49 72 95 118 141 6. Warranty and service 7. Technical data 8. Frequently asked questions I H S L G N E 22 23 24 4 6 7 7 8 8 9 9 9 10 12 Table of Contents 1. Important 2. Your universal remote and docking cradle for iPod 2.1 Whats in the box 2.2 What youll also need 2.3 Universal remote and docking 2.4 Main menu overview cradle for iPod overview 3. Getting Started 3.1 Prepare 3.2 Connect 3.3 Install iPod as a controller for your iPod 12 Browsing and playing music from your iPod 4. Using your universal remote and docking cradle for iPod 4.1 Using your universal remote for 4.2 4.3 Using your universal remote for iPod as a universal remote control 4.4 Starting up an activity 4.5 Replacing the batteries 12 Fixing a key 5. Use more of your universal remote and docking cradle for iPod 5.1 Adding a device 5.2 Deleting a device 5.3 5.4 Adding a function 5.5 Adding an activity 5.6 Deleting an activity 5.7 About RF Settings 5.8 Changing language 5.9 Copying volume 5.10 Changing display time out 5.11 Performing a full reset 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 Table of contents 3 equipment and the receiver.

a circuit different from that to which the receiver is connected.

radio/TV technician for help. Any unauthorized modication to this equipment could result in the revocation of the authorization to operate the equipment. Industry Canada Statement This Class B digital apparatus complies with Canadian ICES-003. 1 Important Take time to read this manual before you use your universal remote and docking cradle for iPod. It contains important information and notes regarding operating your universal remote and docking cradle for iPod. 2008 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :

1 This device may not cause harmful interference ; and 2) This device must accept any interference received, including interference that may cause undesired operation. D Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :

antenna.

4 Important Disposal of your old product:

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. I H S L G N E When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences for the environment and human health. B Warnings

or water.

build-up.

mix different brands of batteries or place zinc carbon batteries in the behavior. remote. This can trigger unpredictable Take the package to your local recycling center. Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste. Please inform yourself about the local rules on separate collection of batteries because the correct disposal will help prevent negative consequences for the environmental and human health. Important 5 2 Your universal remote and docking cradle for iPod Congratulations on your purchase and welcome to Philips!

To fully benet from the support that Philips offers, register your product at www.philips.com/welcome. Your universal remote and docking cradle for iPod allows you to control your iPod remotely while simultaneously charging your iPod. It also allows you to control up to 6 other AV devices. Philips offers an entire line of products to enhance your iPod experience. Your universal remote and docking cradle for iPod works with all iPod models that have a dock connector. For the best connection, use the dock adapter that came packaged with your iPod or choose the appropriate adapter from the 5 included with your universal remote and docking cradle for iPod. D Note Philips SJM3152 is compatible with the following iPod models:

iPod touch 8GB 16GB 32GB D Note Stereo and A/V equipment can only be controlled via Infra Red, or line of sight operation. Distance for controlling these devices is limited to 30 feet and the remote must be in the line of sight of the IR port on your AV equipment. Only devices with an IR sensor can be controlled by the remote. This section gives you an overview of the controls and functions of this universal remote with docking cradle for iPod. Product highlights

cable and satellite system

entertainment system.

playlists and libraries, even under darker lighting conditions.

entertainment system

connect to home stereo via the AV cable provided.

doors, ceilings and windows with 2-way RF technology.

features, playlists and libraries from virtually anywhere at home.

simultaneously.

cable allows you to easily connect to a TV.

6 Your universal remote and docking cradle for IPod 2.1 Whats in the box. I H S L G N E Universal remote control Docking cradle for iPod Power adapter 5 iPod dock adapters: *

S - Video cable 3.5mm-to-RCA AV cable CD ROM with Quick Start guide instruction manual

(3) AA batteries

*For newer iPod versions, please use the adapter that shipped with your iPod. 2.2 What youll also need. or AC iPod with Stereo receiver TV dock connector Electric outlet Your universal remote and docking cradle for IPod 7 2.3 Universal remote and docking cradle for iPod overview 6 POWER MAIN VOL MODE OK 13 12 1 4 7

2 5 8 0 3 6 9

1 2 3 4 5 1 2 3 4 5 6 7 8 9 10 11

Slots for removing dock adapter 3.5mm A/V Out Jack Cradle:

2. 3. 4. DC Power Jack 5. 6. S-Video Out Jack iPodconnector Power key

Remote:

1.

3. Mode key 4. Cursor keys ( Navigation) and OK key 5. Mute key 6. Volume Up/Down key

8.

Playback keys

(Play, Rec, Stop, Rew, FF, Pause, Skip, Next) Device specic keys

9. 10. Digit keys 11. Device specic keys (CC/Text, Clear, Enter, Zoom/16:9, Title, Chapter, SUBT, CC & Zoom for /27 Text & 16:9 for /10, Audio) 12. Channel Up/Down key 13. Main Volume Key 14. 15. No connection icon (See below) 16. IR Transmission icon (See below) Battery low icon (See below) 14 15 16 2.4 Main menu overview 8 Universal remote and Docking cradle for IPod overview 3 Getting Started B Warning Carefully read the safety precautions in section 1.1 Important, before connecting your universal remote and docking cradle for iPod. This section helps you with the rst time installation of your universal remote and docking cradle for iPod. 3. 4. Connect one end of the power cord to an electrical outlet and the other end to the DC 12V jack on the back of your docking cradle. Install the 3 supplied AA batteries into the battery compartment on the remote. Follow the proper polarity markings in the compartment. I H S L G N E 3.1 Prepare 1. Remove all package contents 2. Position your dock near your home entertainment system, stereo or TV. Turn off power on all your home entertainment components.

Remove the protective screen cover from your universal remote for iPod. Remove iPod connector protective cover on the docking cradle. Select the correct dock adapter for your specic iPod model. Insert the correct dock adapter into the universal well on your docking cradle. 3.

5. 6. 7. 8. 3.2 Connect For stereo playback:

1. Connect the red and white RCA connectors on one end of the supplied AV cable to the Audio In RCA jacks on your home entertainment system or stereo. D Note If you are not using the device with video, or you plan on connecting to video via the S-Video connection, leave the yellow RCA connector end unplugged. 2. Connect the other end of the supplied AV cable with 3.5mm plug to the jack labeled AV on your docking cradle. For video playback:

1. 2. 3. 4. Connect one end of the supplied S -Video cable to the Video In jack on your home entertainment system or TV. Connect the other end of the supplied S-Video cable to the jack labeled S-Video on your docking cradle. If you are using the composite video jacks, plug the yellow RCA plug into the RCA video jack on your TV. Connect one end of the power cord to an electrical outlet. Connect the other end to the DC 12V jack on the back of your docking cradle. Install the 3 supplied AA batteries into the battery compartment on the remote. Follow the proper polarity markings in the compartment.

9 RCA Connection 1. Select the language for your instructions on the remote using the cursor keys. Press OK. While pairing the remote to the docking cradle, position the remote within 1m of the dock for the duration of the procedure. D Note While your iPod is docked in the cradle, your iPod screen will show the message below. This is normal operation. 2. 3. Select Next and press OK. Conrm if you want to add other devices, like your TV or DVD player, by selecting Yes. Press OK. This replaces the devices original remote controls with the universal remote for iPod. S-Video Connection 3.3 Install Once you have installed the batteries in the remote and connected all of the appropriate cables, you will need to do a quick pairing of the dock with the remote. D Note It is recommended to complete the initial set-up, including the pairing sequence before docking your iPod in the docking cradle. Pairing the dock with the remote for the rst time:

1. Press the POWER Button on the remote. 2. Position the remote within 1m of the dock for this duration of this procedure. 3. Follow the easy on-screen set-up wizard screen prompts. The easy on-screen set up wizard will guide you through the different steps on the initial set-up of your universal remote for iPod. Initial set-up of your universal remote for iPod:

10

D Note You can adjust the settings of your universal remote for iPod anytime after initial install via the set-up menu. Press the MODE and IPOD LAUNCH keys simultaneously for 3 seconds. I H S L G N E 4. 5. Select the device and brand of the device you want to add by using the cursor keys. Press OK. The remote will search the database for available code sets. Follow the on-screen instructions to test the codes. When a working code set is found, your device is correctly installed. When the device is correctly installed, the following screen appears:

The screen will ask you to press and hold the 2 keys for 3 seconds to enter set-up mode. If no working code set is found:

nd a correct code set. This can take up to 25 minutes.

remote device. To add an additional device:

Select Yes, Press OK. 1. Repeat this process for each 2. additional device. When you are nished adding devices, select No. Press OK. Exit the wizard. 3.

11 4. Using your universal remote and docking cradle for iPod

and docking cradle for iPod. D Note If the No Connection icon begins blinking in the upper right-hand corner of the screen, the universal remote for iPod is not able to connect to the docking cradle for iPod. See Section 8 Frequently Asked Questions to solve the problem. 4.1 Using the universal remote for iPod as a controller for iPod Control your iPod menus, playlists, music and video libraries. 1. Position the correct dock adapter for your specic iPod model in the docking cradle. Position your iPod in the docking cradle Charging begins automatically. Press the IPOD LAUNCH key. 2. 3. The remote connects to your docked iPod and displays your iPod menu playlists. 4.2 Browsing and playing music from your iPod The menu on the universal remote for iPod is similar to the menu on your iPod. Navigating in iPod mode:

1. Scroll to Music, Settings, Now Playing. Press OK to select. D Note If the iPod is not Video capable, the Video option will not appear on your screen. D Note Now Playing is only viewable when a song is playing. 12

2. 3. Press > or OK on the navigation dial to go to the next screen. Selecting Music presents the following screens:

Playlists Artists Albums Songs Podcasts

Composers Audio Books a. To select one of the menu items and go to the next screen, press > or OK on the navigation dial. b. Press < to return to the previous screen or press OK to move to the next screen. c. Repeat until you have made your listening selection. D Note While in iPod Mode, press < cursor key to return to the previous screen / Menu item. Press OK to make a selection and move to the next screen. 4.

Selecting settings will present the following screens:

Off, Songs, and Albums. Default for this option is OFF>

2. c. Repeat until you have made the selection you want to use. 5. Selecting Now Playing will display the most recently played song:

a. Press < to return to the previous screen. I H S L G N E D Note Your universal remote and dock for iPod does

on your iPod. Controlling the volume of your docked iPod and connected AV devices, such as a home theater system, stereo system or TV:

1. To adjust the audio output level of the iPod docking cradle, press the Volume Up or Volume Down keys. A volume bar will be shown on the remotes display screen. If the sound level of playback is still too loud or too soft, press the MAIN VOL key to switch to the AV device and change the master volume. Repeat Repeat Options are:

Off, One, and All. Default for this option is OFF>

D Note Controlling AV devices requires that the components have an IR receiver and that your universal remote for iPod is within 30 feet of the component in line of sight. a. To select one of the menu items and go to the next screen, press > or OK on the navigation dial b. Press < to return to the previous screen. Press OK to move to the next screen. 3.

To return to iPod control, press the IPOD LAUNCH key. 13 D Note The Main Volume works like a short cut key to switch to either TV or AMP or RECEIVER mode. If more than one of these devices is installed, the priority will be: AMP, RECEIVER, TV. Below you can nd a complete overview of the functions for all device specic keys listed for the IPod docking cradle, TV, cable/satellite and your audio set. GUIDE LIVE TV HDD MENU 4.3 Using your universal remote for iPod as a universal remote control You can add up to 6 AV devices and your iPod docking cradle, if available, to your universal remote for iPod. 1. 2. Press MODE key. The device icon of your last selected device will appear on the screen. Repeat MODE press until the device you want to control appears on the display screen. Control the device using the hard keys on your universal remote for iPod. They will access the same function as the corresponding keys of the original remote of the selected device. D Note Music that was started while using the remote as an iPod controller, will continue to play even when you change Modes. D Note Some specic keys that are available on the original remote will not be available on your universal remote for iPod. Check your original remote for the available functions. D Note When you awaken the remote after a time out, the last device selected before the time out will be active. Device specic keys The device specic keys on your universal remote for iPod can have different functions, depending on the device you select via the MODE key. 1 TV 1 DVD 4 AUX 7

CC 8 TUNER 2 3 2 VIDEO1 5 CD 4 3 VIDEO2 6 8

0 9 10 CLEAR ENTER 9 AV

ZOOM 11 TITLE CHAPTER SUBT. AUDIO 12 13 14 15 GUIDE LIVE TV HDD MENU TV 1 DVD 4 AUX 7

CC TUNER 2 VIDEO1 5 8

0 CLEAR ENTER CD 3 VIDEO2 6 9 AV

ZOOM 7 5 6 TV

2. Exit 3. -

4. Menu 5. Digit Keys 6. -/--

7. AV Input 8. cc/text 9. -

10. PIP

12. Color key 13. Color key 14. Color key 15. Color key Sat/Cable

Exit Menu Digit keys

TV/SAT input Favorite Help Enter

Color key Color key Color key Color key Audio set

Menu Input Sources Surround Surround Mode RDS Clear Enter

Front Center Rear Test 14

D Note Other installed devices use the functions that are labeled on the remote. Check your original remote when you are not sure. 2. 3. device appear in the display screen. To scroll through all the extra functions, press the cursor up or cursor down key. When you nd the selection you want, press OK. The remote sends out an IR signal. I H S L G N E For adding extra functions to your universal remote for iPod, see section 5.4, Adding a function. E Tip If you cannot nd the extra function you are looking for, you can exit the Extra menu by pressing the MAIN VOL key again. D Note Some devices do not have any extra functions available in the remotes data base. However, you can easily copy additional functions from your original remote by learning keys. See section 5.4, Adding a function. 4.5 Replacing the batteries B Warning When you replace the batteries, do not mix different brands of batteries or place zinc carbon batteries in the remote. This can trigger unpredictable behavior. When the batteries are almost empty, the

batteries. Follow the local regulations for disposal of the empty batteries. To switch back to your iPod playlist after controlling another device with your universal remote for iPod, press the IPOD LAUNCH key. 4.4 Starting Up an Activity An activity is a sequence of key presses that you can program. For example, for watching a DVD you normally would have to:

1. Turn on the TV;

2. Turn on the DVD;

3. Turn on the surround sound system;

Select the right input on your TV and 4. surround sound system;

Press the PLAY key to start the DVD. 5. By selecting the activity Watch DVD on the universal remote for iPod, all the actions are automatically executed in the predened sequence. Starting up an activity:

1. Press MODE key repeatedly until the activity name appears in the header of the display screen. Conrm your selection by pressing OK. The activity will begin immediately. 2. You can add up to 8 activities to your universal remote for iPod. For more information about adding and deleting activities, see section 5.5, Adding an activity and section 5.6, Deleting an activity. Selecting extra functions Devices may have extra functions that are not covered by the hard keys on your universal remote for iPod. You can select these extra functions in the display. 1. While in any device mode, Press MAIN VOL key. Extra functions for the selected

15 5 Use more of your universal remote and docking cradle for iPod To access the advanced features of your universal remote and dock for iPod, you must use the Set-up menu. To open the Set-up menu, press and hold the MODE and IPOD LAUNCH keys simultaneously for 3 seconds. To exit the Set-up menu and go directly to your iPod menu, press the IPOD LAUNCH key again. To switch to your last selected device, press the MODE key. 5.1 Adding a device To be able to operate your devices with your universal remote for iPod, you rst have to add these devices to the remote control. You can add up to 6 devices from the list of devices below. Examples of available devices include ( but are not limited to):

Please check the Remote menu for the complete listing of device labels that can be added. You cannot add a device twice. Once you have added a device to your Universal remote for iPod, it disappears from the list. However, the list of devices includes TV-2 or VCR-2 for use when you want to program a second TV or second VCR. To add a device:

1. Select the option Add a Device in the Set-up menu by using the cursor keys Press OK. D Note If you have already added 6 devices on the remote, besides your iPod docking cradle, you will be asked to delete a device. 2. 3. Select the device and brand you want to add. Press OK. The remote will search for available codes for the brand. Follow the on-screen instructions to test the codes. When a working code set is found, your device is correctly installed When the device is correctly installed, the following screen appears:

If no working code set is found:

nd a correct code set. This means that the remote will send out all codes available in the database until a working code is found. This can take up to 25 minutes.

remote device. When you want to add another device, select Yes. Press OK and repeat steps 2 and 3. When you have added all your devices, select No. Press OK to return to the Set-up menu. 16 Use more of your universal remote and docking cradle for iPod D Note If your universal remote for iPod has already learned 200 keys, a screen will alert you that the memory is full and automatically return you to the Set-up menu. You will have to delete a device with xed keys to clear memory. I H S L G N E 4. Follow the on-screen instructions to x the key: Point the 2 remotes towards each other at a distance of 0.5 - 2 inches

(2-5 cm). 5.2 Deleting a device You can delete a programmed device from your universal remote for iPod. To delete a device:

1. Select the option Delete a Device in the set-up MENU by using the cursor keys Press OK. Select the device you want to delete from the list. Press OK. Conrm you want to delete that device by selecting Yes. Press OK. The device is now deleted and becomes available again in the list of devices you can add. To return to the Set-up menu, select Exit. Press OK. 2. 3. 4. D Note Keys of the deleted device that are used elsewhere, e.g. in an activity or the volume keys you copied, will be deleted as well. Check the activities you programmed and volume keys for your devices and reprogram them, if necessary. 5.3 Fixing a Key If a hard key is not working properly with your device, you can x the key by learning it from your original remote control. Your universal remote for iPod can store up to 200 learned keys. You can x all keys on your universal remote for iPod except the MODE key, the MAIN VOL key and IPOD LAUNCH key. 5. 6. Select the hard key or extra function you want to x on your universal remote for iPod. To select an extra function press MAIN VOL. Select the function with the Cursor Up or Cursor Down key. Press OK. Press the corresponding key on the original remote until you see conrmation on-screen. After the key is learned and xed. The following screen appears:

To x a key:

1. 2. 3. Select the option Fix a Key in the Set-up menu by using the cursor keys. Press OK. Select the device for which you want to x a key. Press OK. Conrm you have a working original remote control available to learn from by selecting Yes. Press OK. 7. When you would like to x other keys for this device, select Yes. Press OK. Repeat step 3. Use more of your universal remote and docking cradle for iPod 17 When all keys are xed and you want to return to the Set-up menu, select No. Press OK. D Note Fixing a key overwrites the keys data that was stored in your universal remote for iPod. This means that if this key is used in an activity this will also change. iPod when you select the activity. You can add up to 8 activities. One activity can contain a maximum of 25 steps. By default, your universal remote for iPod inserts a delay of 0.6 sec between every key press to make sure your devices are responding correctly to the signals. 5.4 Adding a function You can add extra functions to your universal remote for iPod. To add a function:

1. Select the option Add a Function in the Set-up menu. Press OK. Select the device you want to add a function to. Select the label you want to use for the extra function.

original remote. 2. 3.

The extra function is added to your universal remote for iPod. To access the extra function:

1. Press the MAIN VOL key to access the Functions menu. Select the function you want by using the cursor keys. Press OK. 2. D Note Extra functions are device-specic. They can only be selected when in the desired AV devices specic mode. For example, if you want to access a TV function, the remote must be in the TV mode. 5.5 Adding an Activity An activity consists of several key presses that will be sent out by your universal remote for You can overwrite this default delay:

before receiving the next IR signal, you can insert a delay of 1 or 3 seconds. Replacing the default delay counts as a step in the activity.

different key presses to simulate a long key press, you can add the option no delay. For example: When you would like to turn the

Up key four times, you do not need to insert delays between these 4 key presses.Between each step you add the option no delay. To add an activity:

1. Select the option Add an Activity in the Set-up menu by using the cursor keys. Press OK. D Note If you already have added 8 activities, you will be asked to delete an activity. See section 5.6, Deleting an activity. 2. 3.

Select the label from the list of activities Press OK. Follow the on-screen instructions to create an activity.

device. Press OK. Press the required key to insert a key press.

key or key delay, select YES by pressing OK. If you do not wish to add an additional activity, select NO. Press OK. 18 Use more of your universal remote and docking cradle for iPod

Press OK. See instructions at the end of this procedure, To select the delay you want. Keep in mind that an activity contains a maximum of 25 steps. When you have added all key presses and delays, select No. Press OK. The activity is installed on your universal remote for iPod. 4. To return to the Set-up menu, select Exit. Press OK. To select the delay you want:

1. Use the cursor keys to scroll through the list of possible delays. Press OK on desired delay. Youll see conrmation screen. Press YES to add another key or delay. Press NO to exit activity set-up. 2. 3. E Tip Start up the activity by pressing the Mode key repeatedly until the activity name appears in the header of the universal remote for iPod display screen. Press OK . I H S L G N E 5.6 Deleting an activity 2. To delete an activity from your remote control:

Select the option Delete an Activity in 1. the Set-up menu by using the cursor keys Press OK. Select the activity you want to delete. Press OK. Conrm you want to delete the activity by selecting Yes. Press OK. The activity is deleted and becomes available again in the list of activities you can add. To return to the Set-up menu, select Exit and press OK. 4. 3. 5.7 About RF Settings Show details:

You can check the status of the connection between the docking cradle and remote:

1. 2. 3. Select the option RF Settings in the Set-

up menu by using the cursor keys. Press OK. Select Show details. Press OK The name of the connected docking cradle and the strength of the signal appear. To return to the Set-up menu, select Next. Press OK. D Note When the details of the RF Settings show No Connection, the remote is unable to connect to the docking cradle. If this occurs, you must reconnect to the dock. Reconnect to dock When you want to use your universal remote for iPod with another docking cradle, or in case of technical problems, you will have to pair the remote to the docking cradle again. 1. Press and release reconnect button at the bottom of the iPod docking cradle Use more of your universal remote and docking cradle for iPod 19 2. Select the option RF Settings in the Set-

up menu by using the cursor keys. Press OK. 3. Select Reconnect to Dock. Press OK. You are now pairing the remote to the docking cradle. Be sure to position the remote within 1m of the dock for the duration of this procedure. To return to the Set-up menu, select Next and press. 4. When the details of the RF Settings show Cannot connect to dock. Try again, you must reconnect to the dock using the following procedure:

1. 2. Press the RECONNECT button on the bottom of the dock. After 5 seconds, the

Select Yes on remote. Press OK. Remote and dock will reconnect. When the process is completed, the screen below will appear:

3. Select Next. Press OK. 5.8 Changing language You can change the language of the instructions on your universal remote for iPod. Models purchased in North America offer the following languages:

Models purchased in Europe offer the following languages:

To change the language:

1. Select the option Change language in the Set-up menu by using the cursor keys. Press OK. Select your preferred language. Press OK. The Set-up menu appears on the screen in your preferred language. 2. 5.9 Copying Volume After adding devices, your universal remote for iPod automatically copies the Volume keys and Mute key, as follows:

Satellite box, use the Volume keys of the TV (provided that you have programmed a TV).

the Volume keys of the Amplier or Receiver

(provided that you have programmed an Amplier or Receiver). When no TV or amplier is installed, the Volume keys will not send codes. When the source device is added later on, the Volume keys will be automatically updated. You can change which Volume keys are used. For example, when you 20 Use more of your universal remote and docking cradle for iPod want to use the Volume keys of the Amplier for the DVD. To change the volume keys:

1 . Select the option Copy volume in the Set-

up menu by using the cursor Keys. Press OK. Select the device you want to copy the Volume keys from (e.g. TV or AMP or RECEIVER). Press OK. Select the device you want to copy the Volume keys to (e.g. DVD or SAT). Press OK. Conrm you want to copy the Volume keys from one device to the other by selecting Yes. Press OK. The Volume keys and Mute key are copied. To return to the Set-up menu, select Exit. Press OK. 2. 3. 4. 5. 5.11 Performing a full reset You can reset your universal remote for iPod completely, deleting all programmed devices, activities, learned keys and other settings. After the reset, you will have to congure your remote again. I H S L G N E To perform a full reset:

1. 2. 3. Select the option Full Reset in the Set-up menu by using the cursor Keys. Press OK. Conrm you want to perform a full reset by selecting Yes. Press OK. Press OK to reconrm. The remote control deletes all settings. When the full reset is ended, the remote automatically re-

initializes. You now have to congure your remote again. See section 3.3, Install, and follow the directions for pairing the dock with the remote to repeat this procedure. 5.10 Changing display time out To save power, your universal remote for iPod will switch off when it is not used for a while. This is the display time out. You can change this time out to one of the following:

To change the display time out:

1. Select the option Display Time Out in the Set-up menu by using the cursor keys. Press OK. Select your preferred display time out Press OK. The time out is changed for your universal remote for iPod. The Set-up menu appears on the screen. 2. D Note The display time out has an impact on the life of the batteries. The longer the backlight stays on, the faster the batteries will be drained. Warranty & Service 21 6 Warranty & Service This universal remote and dock for iPod carries a limited one-year warranty. Philips warrants that this product shall be free from defects in material, workmanship and assembly, under normal use, in accordance with the specications and warnings, for one year from the date of your purchase of this product. This warranty extends only to the original purchaser of the product, and is not transferable. To exercise your rights under this warranty, you must provide proof of purchase in the form of an original sales receipt that shows the product name and the date of purchase. For customer support or to obtain warranty service, please call 919-573-7863. THERE

WARRANTIES. Philips liability is limited to repair or, at its sole option, replacement of the product. Incidental, special and consequential damages are disclaimed where permitted by law. This warranty gives you specic legal rights. You may also have other rights that vary from state to state. For customer support or to obtain warranty service, please call 919-573-7854 in North America or visit www.philips.com/support for global support. 22 Warranty & Service General Operating Voltage

Ambient Operating Temperature Range

I H S L G N E

Certifications

7 Technical data Mechanical Specifications Size Docking Station:

Remote Control :

Power

Screen

Connectors

Communication and Interface Transmission Medium IR AND RF Carrier Frequency

Technical data 23 8 Frequently asked questions Here you will nd the most frequently asked questions and answers about your universal remote and dock for iPod. For further help, visit www.philips.com/support or call 919-573-7854 in North America. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when you use your universal remote and dock for iPod, check the following points before you contact Philips. If the problem remains unsolved, go to the Philips website www.philips.com/support or contact Philips at 919-575-7854 in North America. When you contact Philips, make sure that your universal remote and dock for iPod is nearby and the model number and serial number are available. What should I do if Cannot connect to IPod DOCKING CRADLE appears on the screen?

This means the docking cradle is not congured to connect to the remote. Reconnect the remote to the docking cradle. What should I do if No IPod DOCKING CRADLE found appears on the screen?

This means the docking cradle is not within range of the remote. Move closer, up to 3 feet

(1m) of the docking cradle. Press OK to try again. What if I cannot nd my brand in the list of the selected devices?

The brands are divided by device and you could be looking in the wrong device.

for Satellite and DVB-T

combination and CD or DVD in some cases

and hard disc recorders

contain combination devices

functions of the game consoles e.g. Xbox and Play Station.

Not all brands are available in the database. If your brand is not in the list, select Not in list and perform a full database search. The remote will test all codes that are available. This can take up to 25 minutes. How do I quit the installation wizard?

To quit the installation wizard, press the IPOD LAUNCH key. What do I do if the No Connection icon blinks in the upper right-hand corner of the screen?

This could mean:

the power adapter is connected to a live electrical outlet and that the cables are connected properly.

cradle to set up a connection. The remote should be no farther than a maximum distance of 130 ft (40m) from the docking cradle. Obstructions in the path from the remote to the docking cradle can reduce this distance. Move the remote closer to the docking cradle. Another radiant device, e.g. a microwave oven, is positioned too close to the docking cradle and is interfering with the signals of the remote. Turn off the devices placed near the docking cradle that could be causing the interference and try connecting again.

What should I do if the universal remote for iPod is not powered?

Make sure the power adapter is connected to a live electrical outlet and that the cables are connected properly. Your universal remote for 24 Frequently asked questions iPod could be in standby mode. It may take some time for start-up after standby mode. Ensure that 3 fresh AA batteries are installed in the remote. What should I do if one or more keys are not working correctly?

This usually means the specic function is not available on the original remote control. Keep in mind that your universal remote for iPod only has hard keys, so only the hard keys on the remote that have a function in the device will work. It may also mean that the code behind the key is defective. You can x keys from your original remote control. Some keys have device specic functions. I H S L G N E What should I do if the Volume keys are not working properly?

This means the default source device for your device is not installed. After adding devices, the SJM3152 automatically copies the Volume keys and Mute key, as follows:

and Satellite box, use the Volume keys of the TV.

Tuner, use the Volume keys of the Amplier or Receiver. If you did not install the source device, the Volume keys and the Mute key will not work. You can choose to install the source device on your remote.

What do I do if I cannot see all the music available on my iTunes on my universal remote for iPod screen?

Only music that is available in the library of your iPod is shown on the remote. Save the music available on your iTunes library in the library of your selected iPod. What do I do if I cannot wake-up the universal remote for iPod?

This means the battery level is too low. Take out the batteries and insert new batteries. Frequently asked questions 25 Inhaltsverzeichnis 1. Wichtig 2. Universalfernbedienung und Dockingstation fr iPod 2.1 Verpackungsinhalt 2.2 Zustzlich bentigt 2.3 Universalfernbedienung und Dockingstation fr iPod bersicht 31 31 2.4 Hauptmen bersicht 6. Garantie und Kundendienst 7. Technische Daten 8. Hug gestellte Fragen (FAQ) 45 46 47 27 29 30 30 3. Erste Schritte 3.1 Vorbereiten 3.2 Anschlieen Installieren 3.3 32 32 32 33 4. 4.1 4.2 4.3 35 Verwenden der Universalfernbedienung und Dockingstation fr iPod Verwenden der Universalfernbedienung fr iPod als Steuerung fr Ihren iPod35 Suchen und Wiedergeben von Musik von Ihrem iPod Verwenden der Universalfernbedienung fr iPod als Universalfernbedienung Starten einer Aktivitt 35 4.4 4.5 Wechseln der Batterien 37 38 38 5. Weitere Verwendungen der Universalfernbedienung und Dockingstation fr iPod

5.4 Hinzufgen von Funktionen 5.5 Hinzufgen von Aktivitten

5.7 5.8 ndern der Sprache

5.10 ndern der Displayabschaltzeit 5.11 Vollstndiges Zurcksetzen Funkeinstellungen 39

41 41

42 43

44 44 26 Inhaltsverzeichnis

Empfnger an zwei unterschiedliche Stromkreise an.

oder einen erfahrenen Radio- und Fernsehtechniker. Jegliche nicht autorisierte Modikation an diesem

N A M R E G ICES-Erklrung (Kanada) This Class B digital apparatus complies with Canadian ICES-003. 1 Wichtig Nehmen Sie sich vor Verwendung der Universalfernbedienung und Dockingstation fr iPod die Zeit, dieses Benutzerhandbuch zu lesen. Es enthlt wichtige Informationen und Hinweise zum Betrieb der Universalfernbedienung und Dockingstation fr iPod. 2008 Koninklijke Philips Electronics N.V. Alle Rechte vorbehalten. Die Vervielfltigung

ist verboten. Die Marken sind Eigentum von Koninklijke Philips Electronics N.V. oder der jeweiligen Inhaber. FCC-Konformittserklrung

Abschnitt 15. Der Betrieb unterliegt den folgenden zwei Bedingungen:

verursachen, und

annehmen, einschlielich solcher Strungen, die einen unerwnschten Betrieb verursachen. D Hinweis

Bestimmungen fr Digitalgerte der Klasse B gem Abschnitt 15 der FCC-Vorschriften. Diese Bestimmungen sehen einen angemessenen Schutz vor Strungen und Interferenzen bei der

erzeugt und nutzt Hochfrequenzenergie und kann solche abstrahlen. Wenn es nicht vorschriftsmig installiert und verwendet wird, kann es Strungen des Radio- und Fernsehempfangs verursachen. Es kann jedoch nicht ausgeschlossen werden, dass bei einer bestimmten Installation Strungen auftreten.

Fernsehempfang verursacht, was durch Ein- und

knnen Sie versuchen, diese Strungen durch eine oder mehrere der folgenden Manahmen zu beheben:

oder verndern Sie ihre Position. Wichtig 27

hiermit, dass diese Universalfernbedienung SJM3152 den grundlegenden Anforderungen und anderen relevanten Bestimmungen der Direktive 1999/5/EC entspricht.

hochwertiger Materialien und Komponenten entwickelt und hergestellt, die recycelt und wieder verwendet werden knnen. Bendet sich dieses Symbol

(durchgestrichene Abfalltonne auf

Informieren Sie sich ber die geltenden Bestimmungen zur getrennten Sammlung von

Richten Sie sich bitte nach den geltenden Bestimmungen in Ihrem Land, und entsorgen Sie Altgerte nicht ber Ihren Haushaltsabfall. Durch die korrekte Entsorgung Ihrer Altgerte werden Umwelt und Menschen vor mglichen negativen Folgen geschtzt. B Warnungen

Wasser aus.

Sonnenlicht aus, um einen Wrmestau zu vermeiden.

demontieren oder zu reparieren.

Spannungen aus.

nicht verschiedene Batterietypen zu kombinieren oder Zink-Kohle-Batterien in die Fernbedienung einzusetzen. Dies kann undenierte Betriebszustnde zur Folge haben. Entsorgen Sie die Verpackung vorschriftgem. Wichtig 28 2 Universalfernbedienung und Dockingstation fr iPod

lckwunsch zum Kauf eines Qualittsprodukts von Philips!

Um den von Philips bereitgestellten Kundendienst in vollem Umfang nutzen zu knnen, registrieren Sie Ihr Produkt unter www.philips.com/welcome. Mit der Universalfernbedienung und Dockingstation fr iPod knnen Sie Ihren

Auerdem knnen Sie damit bis zu 6 weitere

Produktlinie an, mit der Sie Ihren iPod erweitern knnen. Die Universalfernbedienung und Dockingstation fr iPod ist fr alle iPod-Modelle mit Dock-Anschluss geeignet. Um eine optimale Verbindung herzustellen, verwenden Sie den mit Ihrem iPod mitgelieferten Dockingadapter, oder whlen Sie aus den 5 mit der Universalfernbedienung und Dockingstation fr iPod mitgelieferten Adaptern die geeignete Ausfhrung aus. D Hinweis Philips SJM3152 ist mit folgenden iPod-Modellen kompatibel:

iPod touch 8GB 16GB 32GB D Hinweis

Infrarot, d. h. ber eine optische Sichtverbindung gesteuert werden. Die Reichweite zum Steuern

Fernbedienung muss eine Sichtverbindung

ber einen IR-Sensor verfgen. N A M R E G In diesem Abschnitt nden Sie eine bersicht der Bedienelemente und Funktionen der Universalfernbedienung und Dockingstation fr iPod. Wichtige Produktinfos

Videorecorder, DVD-Player, Kabel- und Satellitensystemen

Entertainment-Systemen.

Hintergrundbeleuchtung

der Wiedergabelisten und Bibliotheken,

Home-Entertainment-System

an die die Stereoanlage ber das mitgelieferte AV-Kabel angeschlossen ist.

Stockwerke und Tren, Zimmerdecken und Fenster mit der 2-Weg- HF-Technologie.

Wiedergabelisten und Bibliotheken des iPod an praktisch jedem Ort im Haus.

Wiedergabe.

greren Bildschirm

dem S-Video-Ausgangskabel oder dem Cinch-AV-Kabel (gelber Cinch-Stecker).

Universalfernbedienung und Dockingstation fr iPod 29 2.1 Verpackungsinhalt Universalfernbedienung Dockingstation fr iPod Netzgert 5 iPod-Dock-Adapter: *

S-Video-Kabel 3,5-mm/Cinch-AV-Kabel CD-ROM mit Kurzanleitung Bedienungsanleitung

(3) AA-Batterien

*Verwenden Sie fr neuere iPod-Modelle den mit dem iPod mitgelieferten Adapter. 2.2 Zustzlich bentigt oder AC iPod mit Stereo-Receiver Fernsehgert Dock-Anschluss Netzsteckdose 30 Universalfernbedienung und Dockingstation fr iPod 2.3 Universalfernbedienung und Dockingstation fr iPod bersicht 6 POWER MAIN VOL MODE OK 13 12 1 4 7

2 5 8 0 3 6 9

1 2 3 4 5 1 2 3 4 5 6 7 8 9 10 11 N A M R E G

3,5-mm-AV-Ausgangsbuchse Dockingstation:

3.

S-Video-Ausgangsbuchse 5. 6. iPod-Anschluss Einschalttaste

Fernbedienung:

1.

3. MODE-Taste 4. Cursortasten ( Navigation) und OK-Taste 5.

7. 8. Stummschaltungstaste

iPod-Starttaste Wiedergabetasten (Wiedergabe, Aufnahme, Stopp, Rcklauf, Schnellvorlauf, Pause, berspringen, Weiter)

10. Zifferntasten

Kapitel, Untertitel, CC & Zoomen fr /

27 Text & 16:9 fr /10, Audio)

14. 15. 16. Symbol fr schwache Batterie (siehe unten) Symbol fr keine Verbindung (siehe unten) IR-bertragungssymbol (siehe unten) 14 15 16 2.4 Hauptmen bersicht Universalfernbedienung und Dockingstation fr iPod bersicht 31 3 Erste Schritte B Warnung

1.1, Wichtig sorgfltig durch, bevor Sie die Universalfernbedienung und Dockingstation fr iPod anschlieen. In diesem Abschnitt wird die Erstinstallation der Universalfernbedienung und Dockingstation fr iPod erlutert. 2. 3.

Verbinden Sie den 3,5-mm-Klinkenstecker des mitgelieferten AV-Kabels mit der mit AV beschrifteten Buchse der Dockingstation. Verbinden Sie ein Ende des Stromversorgungskabels mit einer Netzsteckdose und das andere Ende mit der Buchse DC 12V an der Rckseite der Dockingstation.

in das Batteriefach der Fernbedienung ein. Beachten Sie die Polarittssymbole im Batteriefach. 3.1 Vorbereiten 1. Entnehmen Sie den gesamten Verpackungsinhalt. Stellen Sie die Dockingstation in der Nhe des Home-Entertainment-Systems, der Stereoanlage oder des Fernsehgerts auf. Schalten Sie alle Unterhaltungselektronikgerte in Ihrem Haus aus. Suchen Sie eine nahe gelegene, freie Netzsteckdose. Entfernen Sie die Bildschirm-Schutzabdeckung von der Universalfernbedienung fr iPod. Entfernen Sie die Schutzabdeckung des iPod-Anschlusses von der Dockingstation. Whlen Sie den richtigen Dock-Adapter fr Ihr spezisches iPod-Modell aus. Setzen Sie den richtigen Dock-Adapter in die Dockingstation ein. 2. 3. 4. 5. 6. 7. 8. 3.2 Anschlieen Fr Stereo-Wiedergabe:

1. Schlieen Sie die roten und weien Cinch-Stecker des mitgelieferten AV-Kabels an die Cinch-Audioeingangsbuchsen Ihres Home-Entertainment-Systems oder Ihrer Stereoanlage an. D Hinweis

verbinden oder es ber den S-Video-Anschluss mit einem Videogert verbinden mchten, lassen Sie den gelben Cinch-Stecker am Kabelende frei. Fr Videowiedergabe:

1. Verbinden Sie ein Ende des mitgelieferten S-Video-Kabels an der Videoeingangsbuchse Ihres Home-Entertainment-Systems oder Fernsehgerts an. Schlieen Sie das andere Ende des mitgelieferten S-Video-Kabels an die mit S-Video beschrifteten Buchse der Dockingstation an. Wenn Sie die Composite-

Video-Buchsen verwenden (FBAS), verbinden Sie den gelben Cinch-Stecker mit der Cinch-

Videobuchse am Fernsehgert. Verbinden Sie ein Ende des Stromversorgungskabels mit einer Netzsteckdose. Verbinden Sie das andere Ende mit der Buchse DC 12V an der Rckseite der Dockingstation.

in das Batteriefach der Fernbedienung ein. Beachten Sie die Polarittssymbole im Batteriefach. 2. 3.

32 Erste Schritte S-Video-Verbindung S-Video-Verbindung 3.3 Installieren Nach dem Einlegen der Batterien in die Fernbedienung und dem Anschlieen aller entsprechenden Kabel mssen Sie eine Paarung der Dockingstation mit der Fernbedienung vornehmen. D Hinweis Es wird empfohlen, die Ersteinrichtung einschlielich der Paarung auszufhren, bevor Sie den iPod in die Dockingstation einsetzen. Paarung von Dockingstation und Fernbedienung bei der ersten Inbetriebnahme:

1. Drcken Sie auf der Fernbedienung die Taste POWER. 2. Whrend dieses Vorgangs muss sich die Fernbedienung in einem Abstand von 1 m zur Dockingstation benden. 3. Befolgen Sie die Eingabeaufforderungen des Einrichtungsassistenten auf dem Bildschirm. Der Einrichtungsassistent fhrt Sie durch die einzelnen Schritte der Ersteinrichtung der Universalfernbedienung fr iPod. Ersteinrichtung der Universalfernbedienung fr iPod:

1. Whlen Sie mit den Cursortasten die Sprache fr die Anweisungen auf der Fernbedienung aus. Drcken Sie auf OK. N A M R E G Whrend der Paarung der Fernbedienung mit der Dockingstation muss sich die Fernbedienung in einem Abstand von 1 m zur Dockingstation benden. D Hinweis Whrend sich der iPod in der Dockingstation bendet, wird auf dem Bildschirm des iPod die nachfolgende Meldung angezeigt. Dies verweist auf eine ordnungsgeme Funktion. 2.

Whlen Sie Next (Weiter), und drcken Sie auf OK.

hinzufgen mchten, wie z B. ein Fernsehgert oder einen DVD-Player, indem Sie die Option Yes (Ja) auswhlen. Drcken Sie auf OK. Hierdurch werden die

die Universalfernbedienung fr iPod ersetzt. Erste Schritte 33

abgeschlossen haben, whlen Sie die Option No (Nein) aus. Drcken Sie auf OK. Beenden Sie den Assistenten. D Hinweis Anpassen knnen Sie die Einstellungen der Universalfernbedienung fr iPod auch nach der Erstinstallation jederzeit ber das Einrichtungsmen. Drcken Sie die MODE-Taste und die IPOD-STARTTASTE 3 Sekunden lang gleichzeitig. Auf dem Bildschirm wird die Aufforderung angezeigt, die beiden Tasten 3 Sekunden lang gedrckt zu halten, um den Einrichtungsmodus aufzurufen. Erste Schritte 4. 5. Whlen Sie mit den Cursortasten den

hinzufgen mchten. Drcken Sie auf OK. Die Fernbedienung durchsucht jetzt die Datenbank nach verfgbaren Codestzen. Folgen Sie den Anweisungen am Bildschirm, um die Codes zu testen. Wenn ein funktionierender Codesatz gefunden

wird der folgende Bildschirm angezeigt:

Wenn kein funktionierender Codesatz gefunden wurde:

durchfhren, um einen richtigen Codesatz zu nden. Dieser Vorgang kann bis zu 25 Minuten dauern.

lernen.

1. Whlen Sie die Option Yes (Ja) aus, und drcken Sie auf OK. Wiederholen Sie diesen Vorgang fr jedes

2. 34 N A M R E G 4. Verwenden der Universalfernbedienung und Dockingstation fr iPod

Universal-

fernbedienung und Dockingstation fr iPod kennen. D Hinweis Wenn in der oberen rechten Ecke des Bildschirms das Symbol fr keine Verbindung zu blinken beginnt, kann die Universalfernbedienung fr iPod keine Verbindung zur Dockingstation fr iPod herstellen. Zur Problembehebung siehe Abschnitt 8, Hug gestellte Fragen (FAQ). 4.2 Suchen und Wiedergeben von Musik von Ihrem iPod Das Men der Universalfernbedienung fr iPod ist dem Men des iPod hnlich. 4.1 Verwenden der Universal-

fernbedienung fr iPod als Steuerung fr Ihren iPod Steuern der Mens, Wiedergabelisten und Musik-

und Videobibliotheken des iPod. 1. Setzen Sie den richtigen Dock-Adapter fr Ihr spezisches iPod-Modell in die Dockingstation ein. Setzen Sie den iPod in die

beginnt automatisch. 2. 3. Drcken Sie die IPOD-STARTTASTE. Navigieren im iPod-Modus:

Die Fernbedienung stellt eine Verbindung zum iPod in der Dockingstation her und zeigt die Wiedergabelisten des iPod-Mens an. 1. Navigieren Sie zu Music, Settings, Now Playing (Musik, Einstellungen, Sie hren). Drcken Sie auf OK, um die gewnschte Option auszuwhlen. D Hinweis Wenn der iPod nicht ber Videofunktionen verfgt, wird die Videooption nicht auf dem Bildschirm angezeigt. D Hinweis Now Playing (Sie hren) wird nur whrend der Wiedergabe eines Musiktitels angezeigt. Verwenden der Universalfernbedienung und Dockingstation fr iPod 35