all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User manual | Users Manual | 622.96 KiB | ||||
1 |
|
Internal photos | Internal Photos | 3.69 MiB | ||||
1 |
|
External photos | External Photos | 2.48 MiB | ||||
1 |
|
Label format and location | ID Label/Location Info | 38.85 KiB | ||||
1 |
|
Agent authorization letter | Cover Letter(s) | 40.25 KiB | ||||
1 |
|
Authorization letter | Cover Letter(s) | 35.00 KiB | ||||
1 |
|
Confidentiality request letter | Cover Letter(s) | 28.70 KiB | ||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | User manual | Users Manual | 622.96 KiB |
vice is not listed in the Manufacture Code List. 1. Turn on the device you wish to program 2. Point the remote control at the device 3. Press and hold the appropriate mode key you want to assign to this device (TV, DVD or AUX) on the remote control 4. While holding the mode key, press the OK key 5. Release both the mode key and the OK key All the mode keys should flash twice Youll now have 10 seconds to start step 6 6. Enter 922 by pressing the number keys on the remote control The selected mode key will flash twice indicating correct en-
try 7. For TV or DVD modes press and release the PLAY key For AUX searching only, press and release the PLAY key then press 1 for VCR 2 for Receiver/Tuner 3 for Amplifier 4 for Home Theater In A Box
(HTIB) The AUX mode keys will flash twice indicating correct entry 8. Now press the FF button multi-
ple times until the device turns off 9. Press the ENTER key (bottom right) to save the code on the remote control 10. Check to make sure the code works by pressing the mode key, then the power button, to turn the device back on. If this does not work, start again at step 2. 11. Now that your devices are pro-
grammed, you can press the appropriate mode key on the remote control to work with the selected device. To use the remote control for your AT&T U-
verse TV Receiver again, press the AT&T mode key. Note:
If any other key is pressed except PLAY, ENTER, POWER, EXIT, REW, FF, or number keys 1 to 4, the selected mode key will give a long red flash
(error message) and the remote control will return to normal opera-
tion and you will need to start over. If you are interrupted while you are programming, the remote con-
trol may time-out before you com-
plete the code set-up and you will need to start over. This is indicated by a red flash of the mode keys. 2. Setting up your Volume, Channel and Power Options The default for your power, vol-
ume and channel controls send the codes to the U-verse TV receiver no matter what mode you are in. Thus, in DVD mode, the volume still con-
trols the U-verse TV receiver, etc. If you would like to change this, follow these instructions:
A. Volume Control Set-Up Options The volume commands are always sent to the U-verse TV receiver un-
til the TV mode key is programmed. Then the volume commands are sent to the TV from all mode keys. If youd like the volume commands to still be sent to just one device, but that it be a different device (for example a home theater setup) then follow the instructions in Section I. If youd like the volume commands sent to different devices depending on which mode you are in then go to Section II. I. Volume Always Controls the same Device 1. Press and hold the AT&T key on the remote control 2. While holding the AT&T mode key, press the OK key 3. Release both the AT&T key and the OK key All the mode keys will flash twice indicating programming mode 4. Enter 955 by pressing the number keys on the remote control The AT&T key will flash twice indicating correct entry 5. Press the mode key that you want to always receive the vol-
ume commands The selected mode key will flash three times indicating suc-
cessful assignment and return to normal operations The volume commands will now go to the selected device no matter what mode you are in. II. Volume Control Depends on Device Selected The volume setting can also be re-
configured to independently control the volume associated with each de-
vice. (e.g. In AUX mode the receiver controls the audio; In TV mode the TV controls the audio) 1. Press and hold the AT&T key on the remote control 2. While holding the AT&T mode key, press the OK key 3. Release both the AT&T key and the OK key All the mode keys will flash twice indicating programming mode 4. Enter 955 by pressing the number keys on the remote control The AT&T key will flash twice indicating correct entry 5. Press the ENTER key The AT&T key will flash three times indicating successful as-
signment and returns to normal operations B. Channel Selection Set-Up Option By default the remote control will always send channel commands to the U-verse TV receiver no matter what mode you are in. This will pre-
vent accidental TV channel changes while in TV, DVD or AUX modes. There are two ways you can change this: I) Have channel commands al-
ways go to a single device other than the U-verse TV receiver; II) Have channel commands go to different devices when in different modes
(e.g., When in TV mode the chan-
nel commands go to the TV, when in DVD mode the channel commands go to the DVD player, etc.). See the appropriate section for each. I. Channel Always Controls the Same Device 1. Press and hold the AT&T key on the remote control 2. While holding the AT&T mode key, press the OK key 3. Release both the AT&T key and the OK key All the mode keys will flash twice indicating programming mode 4. Enter 966 by pressing the number keys on the remote control The AT&T key will flash twice indicating correct entry 5. Press the mode key that you wish the channel commands to always go to The selected mode key will flash three times indicating suc-
cess and return to normal opera-
tions. The channel commands will now go to the selected device no matter what mode you are in. II. Channel Control Depends on Device Selected 1. Press and hold the AT&T key on the remote control 2. While holding the AT&T mode key, press the OK key 3. Release both the AT&T key and the OK key All the mode keys will flash twice indicating programming mode 4. Enter 966 by pressing the number keys on the remote control The AT&T key will flash twice indicating correct entry 5. Press the Enter key The AT&T key will flash three times indicating successful as-
signment and return to normal operations. If you press any key other than the mode keys or ENTER, the AT&T key will give a long red flash and the remote control will return to normal operation. Should the remote con-
trol time-out before you complete the procedure you will need to start over. C. Power Control Set-Up Options By default, the POWER key only powers on or places your U-verse TV receiver in stand-by mode. Once you have programmed the TV mode key, the TV and U-verse TV receiver will both be powered on/off simultane-
ously. You also have the option to turn on/off TV, DVD and AUX mode devices individually by pressing the applicable mode key then the POW-
ER key. I. To Have Multiple Devices Power Off with the Power Key If you would like other devices to be powered on/off simultaneously with the POWER key, then follow these instructions for the additional de-
vices (for a total of 4). 1. Press and hold the AT&T key on the remote control 2. While holding the AT&T mode key, press the OK key 3. Release both the AT&T key and the OK key All the mode keys will flash twice indicating programming mode 4. Enter 977 by pressing the number keys on the remote control The AT&T key will flash twice indicating correct entry 5. Press the AT&T key on the re-
mote control The AT&T key will flash twice indicating correct entry 6. Press the TV key on the remote control The TV key will flash twice indi-
cating correct entry 7. Press each additional mode key that you wish to include such as the DVD key or AUX key Each selected mode key will flash twice indicating correct en-
try 8. Press the ENTER key to com-
plete The last mode key selected will flash three times indicating suc-
cessful assignment and return to normal operations Note:
If any key is pressed except the mode keys and ENTER, the AT&T key will give a long red flash and the re-
mote control will return to normal operation. Should the remote con-
trol time-out before you complete the procedure you will need to start over. If the devices that you have pro-
grammed to turn ON/OFF at the same time get out of sync so that some turn ON and others turn OFF, you will need to manually turn OFF the out of sync devices and then press the POWER key to turn them to operate a VCR, Home Theater In A Box (HTIB), Receiver or Amplifier. A. Manually Use the following steps to program the TV, DVD or AUX mode keys:
1. Power on the device you want to program from 2. Locate the 4-digit set-up code for the device you want to pro-
gram the Manufacture Code List in this manual. If your device is not listed you will need to use section B on Using the Automatic Search. If there are multiple codes listed for your device, you may need to repeat steps 2 through 7 to find the cor-
rect one. 3. Press and hold the appropriate mode key you want to assign to this device (TV, DVD or AUX) on the remote control 4. While holding the mode key, press the OK key 5. Release both the mode key and the OK key All the mode keys should flash twice Youll now have 10 seconds to start step 6 6. Enter the appropriate 4-digit set-
up code for your device (from the Manufacture Code List) by pressing the number keys (0-9) on the remote control If the mode key flashes three times, then a correct code has been entered. If the mode key gives a long flash, then an invalid code has been entered. Start over at step 3. If all the mode keys give a long flash, then the remote control has timed-out. Start over at step 3 7. Point the remote control at the programmed device and press the power key once The device should turn off If it does not turn off, repeat steps 2 through 6 trying each code for your brand until you find the correct code 8. Repeat steps 1 through 7 to pro-
gram another device. Note: If you are interrupted while you are programming, the remote con-
trol may time-out before you com-
plete the code set-up and you will need to start over. This is indicated by a red flash of the mode keys. Now that your devices are pro-
grammed, you can press the appro-
priate mode key on the remote con-
trol to work with the selected device. To use the remote control for your U-verse TV Receiver again, press the AT&T mode key. Combination Devices Note: If you have an integrated or combination unit, such as a TV/DVD unit, each component of the unit needs to be programmed separately. In the Man-
ufacture Code List for these devices there will be codes for all compo-
nents of the combination unit. They can be distinguished as follows:
- TV codes start with a 1
- DVD codes start with a 2
- AUX codes start with a 3 For some combination devices, the original remote control may be re-
quired to switch between the com-
ponents. B. Using the Automatic Search You can search the remote control memory for your 4 digit manufacture device code. You will need to use this function if the code for your de-
AT&T IR U-verse TV Remote Control User Guide Installing Batteries The remote control requires two AA size (1.5V) Alkaline batteries to work. Tips: replace the batteries every nine months for optimum performance. 1. On the back of the remote con-
trol, press the battery cover tab forward, lift and remove the bat-
tery cover. 2. Insert two (2) AA-size batteries, matching the + and symbols with the battery pictures. 3. Put the battery cover back on and test the remote control by pressing the AT&T key. The AT&T key should light up to indicate that batteries are inserted prop-
erly. 4. Re-pairing to TX Transmitter unit is required upon battery replace-
ment on the remote control and vice visa. Battery placement is simple, remove the battery lid on the TX Transmitter unit and insert the coin cell battery provided in the battery slot. Next, replace battery lid on the TX Transmitter Unit. 5. Refer to item 7 RF Pairing with Transmitter on this user manual for full instruction. Controlling Other Devices In order to control other devices with your U-Verse TV Remote Control, you need to tell the remote control what types of devices you have. Section 1 guides you through the steps need-
ed to do this. When you complete Section 1, the volume and channels will always work on the U-verse TV Receiver no matter what mode you are in. If you want to change this or allow the POWER key to affect multi-
ple devices then you can also follow the steps in Section 2. If youd like to reset any of the settings then you can go to Sections 3 and 4. 1. Programming the remote to control other devices To use the U-verse TV remote con-
trol for your other devices, you will need to program one or more of the TV, DVD or AUX buttons at the top of the remote control. There are two ways to do this. If your device is list-
ed in the Manufacture Code List at the end of this Manual, you can use section A. If your device is not listed, you will need to use section B. Note:
The AUX button may be programmed AT&T RC1534819 (12 Jun 2008).ind1 1 all back ON. It is important to point the remote directly toward the de-
vices for this to work properly. To change the number of devices controlled by the POWER key, you must start at Step 1 and continue until all desired devices have been programmed. 3. Changing and Removing Codes A. Mode Deactivation To deactivate a mode key, follow these steps:
1. Press and hold the mode key
(TV, DVD or AUX) that youd like to deactivate on the remote con-
trol 2. Without releasing the chosen mode key, press and hold the OK key simultaneously 3. Release both the mode key and the OK key All the mode keys should flash twice 4. Enter the appropriate 4-digit code from the list below de-
pending on the mode you are deactivating:
TV: 1254 DVD: 2254 AUX: 3254 The mode key will flash three times indicating correct entry and return to normal operation When an invalid code is en-
tered, the selected mode key will give a long flash to indicate that you have not entered the code correctly Should the remote control time-out before you complete the set-up, you will need to start over B. Reassigning Your Mode Keys To Another Device The TV, DVD and AUX keys are already set up to control specific devices:
TV key: TV & HDTV DVD key: DVD AUX key: VCR, Home Theater In A Box (HTIB), Receivers and Amplifiers You may change these mode keys to operate another type of device. To do this, you must copy an existing mode key to the one you would like to change. For example, you have two DVD players and youd like to use the AUX key for one of them. You would begin by programming one of the DVD players into the DVD mode key and then copy that to the AUX mode key. Then you reprogram the original DVD mode key to the other DVD player. Before beginning these steps, program the device youd like to copy by following the steps in Section 1. Then use the steps below to copy the codes. 1. Press and hold the AT&T key on the remote control 2. Without releasing the AT&T key, press and hold the OK key simul-
taneously 3. Release both the AT&T key and the OK key All the mode keys will flash twice indicating programming mode 4. Enter 944 by pressing the number keys on the remote control All the mode keys will flash twice indicating correct entry 5. Press the mode key (i.e., TV, DVD or AUX) you would like to copy the codes FROM (See above) The selected mode key will flash once 6. Press the mode key you would like to copy the codes TO The selected mode key will flash three times indicating suc-
cessful reassignment and return to normal operations Once you copy the mode key, you will have both keys with the same program code. Now reprogram the original mode key with a new code for a second device. Note:
If any other key is pressed except the mode keys the AT&T key will give a long red flash and the remote con-
trol will return to normal operation. Should the remote control time-out before you complete the procedure you will need to start over. 4. Resetting to Factory Defaults A. Resetting the Remote Control to Factory Default Settings:
1. Press and hold the AT&T key on the remote control. 2. Without releasing the AT&T key, press and hold the OK key. 3. Release both the AT&T key and the OK key All four mode keys will flash twice to indicate programming mode. 4. Enter programming code 900 by pressing the number keys on the remote control. The AT&T key will flash three times indicating you have suc-
cessfully entered the code and the remote has been reset to the default settings Note:
If any other key is pressed except the number keys, the AT&T key will give a long red flash and the remote con-
trol will return to normal operation. Should the remote control time-out before you complete the procedure you will need to start over. B. Resetting the Volume, Channel and Power Programming:
1. Press and hold the AT&T key on the remote control. 2. Without releasing the AT&T key, press and hold the OK key. 3. Release both the AT&T key and the OK key All four mode keys will flash twice to indicate programming mode 4. Enter programming code 902 by pressing the number keys on the remote control. The AT&T key will flash three times indicating you have suc-
cessfully entered the code to re-
set Volume, Channel and Power to the defaults and the remote will return to normal operation Note:
If any other key is pressed except the number keys, the AT&T key will give a long red flash and the remote con-
trol will return to normal operation. Should the remote control time-out before you complete the procedure you will need to start over. 5. Learning the remote to control other devices In cases where devices are not listed in the Manufacture Code List in this manual or certain keys are not avail-
able, but you have the original re-
mote control on hand, you can learn the codes from the original remote control into the desired keys of this U-verse remote control. To learn the desired IR codes from the original remote, follow these steps:
1. Get ready the original remote control to be learnt 2. Press and hold the mode key (i.e. TV, DVD or AUX) where you want the codes to be learned. 3. Without releasing the selected mode key, press and hold the MENU key simultaneously. 4. Release both the mode key and the MENU key All the mode keys will flash twice indicating programming mode sage), the learn codes will not be erased and you will need to replace new batteries and start over. 5. Enter 988 by pressing the number keys on the remote control The selected mode key will flash twice indicating correct en-
try 6. Press the key on this U-verse re-
mote control that you want the codes to be learnt to (TV, DVD and AUX keys are mode keys and so not available for learning) The selected mode key will flash twice indicating correct en-
try 7. Point the original remote control directly opposite to this U-verse remote control. 8. Press and hold the key on the original remote control where the code is to be learnt The original remote control transmits code to this U-verse remote control. Upon comple-
tion this U-verse remote con-
trol, selected mode key will flash three times indicating successful learning. 9. Release the key on the original remote control 10. Repeat steps 6-9 for learning more codes. 11.Press any of the mode key (i.e. AT&T, TV, DVD or AUX) to return to normal operations The selected mode key will flash three times and return to normal op-
erations Note:
If no code is received from original remote within the 30 seconds, then all the selected mode keys will give a long red flash (error message) and this U-verse remote control will re-
turn to normal operations. You will need to start over. If codes from original remote are poorly received, or battery is weak, or learns memory is full, then only the single selected mode key will give a long red flash (error message) and this U-verse remote control will return to normal operations. You will need to start over after replacing batteries or erasing some existing learn codes. 6. Resetting of Learning Codes A. Resetting of Individual Learning Codes To erase individual learn codes, fol-
low these steps:
1. Press and hold the mode key (i.e. TV, DVD or AUX) which you want to erase learn codes 2. Without releasing the selected mode key, press and hold the MENU key simultaneously 3. Release both the mode key and the MENU key All the mode keys will flash twice indicating programming mode 4. Enter 904 by pressing the number keys on the remote control The selected mode key will flash twice indicating correct en-
try 5. Press the key that you want to erase the learn codes The selected mode key will flash three times indicating suc-
cessful resetting 6. Repeat step 5 for erasing other learning codes 7. Press any of the mode key (i.e. AT&T, TV, DVD or AUX) to return to normal operations The selected mode key will flash three times and return to normal operations Note:
If the battery power is weak during resetting mode, the selected mode key will give a long flash (error mes-
B. Resetting of All Learning Codes within TV, DVD or AUX mode To erase all learn codes in selected mode TV, DVD or AUX, follow these steps:
1. Press and hold the mode key (i.e. TV, DVD or AUX) which you want to erase learn codes 2. Without releasing the selected mode key, press and hold the MENU key simultaneously 3. Release both the mode key and the MENU key All the mode keys will flash twice indicating programming mode 4. Enter 905 by pressing the number keys on the remote control The selected mode key will flash three times indicating suc-
cessful erasing of all learn codes under the selected mode and the remote control will return to normal operations Note:
If the battery power is weak during resetting mode, the selected mode key will give a long flash (error mes-
sage), the learn codes will not be erased and you will need to replace new batteries and start over C. Resetting of All Learning Codes in All Modes To erase all learn codes, follow these steps:
1. Press and hold the AT&T mode key on the remote control 2. Without releasing the AT&T mode key, press and hold the MENU key simultaneously 3. Release both the AT&T mode key and the MENU key All the mode keys will flash twice indicating programming mode 4. Enter 906 by pressing the number keys on the remote control The AT&T mode key will flash three times indicating success-
ful erasing of all learn codes and the remote control will return to normal operations Note:
If the battery power is weak during resetting mode, the selected mode key will give a long flash (error mes-
sage), the learn codes will not be erased and you will need to replace new batteries and start over 7. RF Pairing with Transmitter By default this remote recognises RF signal from all similar RF transmit-
ters. However you can set this re-
mote control to recognize RF signal only from its dedicated transmitter by performing this function:
1. Remove the battery lid from the Transmitter and get ready a sharp object (such as a pencil) 2. Place the remote control near the RF transmitter 3. Press and hold the AT&T key on the remote control 4. Without releasing the AT&T mode key, press and hold the MENU key simultaneously 5. Release both the AT&T mode key and the MENU key All the mode keys will flash twice indicating programming mode 6. Enter 990 by pressing the number keys on the remote control The AT&T mode key will flash twice indicating correct entry 7. Press and release the OK key on the remote control to start RF pairing 8. Use the sharp object to press and release the tiny Pairing key on the RF transmitter The AT&T mode key will flash three times indicating successful RF pairing Note:
If the batteries are removed from the remote control, the pairing with the Transmitter will be lost, and the remote will respond to RF signals from all similar RF transmitters. You will need to pair them again. If the battery is removed from the Transmitter, the pairing with the remote control will be lost, and the remote will not respond to any transmitter. You will need to pair the Transmitter with the remote again. 8. Backlight Control Set Up Option By default the Backlight is set to Off. You can turn the Backlight on or off by performing this function. 1. Press and hold the AT&T key on the remote control 2. Without releasing the AT&T mode key, press and hold the MENU key simultaneously 3. Release both the AT&T mode key and the MENU key All the mode keys will flash twice indicating programming mode 4. Enter 991 by pressing the number keys on the remote control The AT&T mode key will flash three times indicating successful toggling the Backlight enabling/
disabling control. Note:
The Backlight is turned off upon factory default settings and you will need to perform this function to turn the Backlight on again. FCC ID:RCSTX100001 Federal Communication Commission Interference Statement residential This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. changes FCC Caution: Any or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and this device must accept any including interference that may cause undesired operation.
(2) interference received, This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 6/12/2008 1:36:47 PM Manufacture Code List 1098 1001, 1099 1005, 1053, 1110, 1113 TV Abex Admiral Advent Adventura 1100 1015 Aiko 1034 Aiwa 1002, 1427 Akai Alleron 1044 Amtron 1036 Anam National 1003, 1036 1004, 1005 AOC Apex 1111, 1119, 1163, 1256 Audiovox 1036 Bang & Olufsen 1453 Belcor 1004 Bell & Howell 1001, 1045 Benq Bradford Broksonic 1114, 1121, 1382, 1383 Brokwood 1004 Candle Celebrity Citizen 1004, 1007, 1100 1002 1004, 1007, 1015, 1036 1073, 1097, 1100 1042 1036 Colortyme 1004 Concerto 1004 Contec/Cony 1011, 1012, 1036 Craig Crosley Crown CTX Curtis Mathes 1000, 1004, 1014, 1045 1036 1000, 1053 1036, 1053 1257 CXC Cytron Daewoo 1073, 1097, 1385 1036 1456 1004, 1005, 1013, 1015 1016, 1097, 1106, 1258 1362, 1368, 1369 1004, 1097 Daytron DiamondVision 1461 1000 Dimensia Dumont 1160 Durabrand 1259 Dynatech 1004 Electroband 1002 Electrohome 1002, 1003, 1004, 1018 Emerson Gibralter Goldstar 1021 1004, 1011, 1013, 1025 1028, 1031, 1033, 1036 1044, 1045, 1080, 1097 1101, 1102, 1107, 1382 1383 1004 1043, 1045, 1047, 1103 1029, 1044 1036, 1044, 1384 Envision Fisher Fujitsu Funai Futuretec 1036 1038 Gateway 1000, 1003, 1004, 1008 GE 1021, 1048, 1049, 1063 1068, 1094, 1144, 1164 1224, 1367, 1380, 1381 1385, 1386 1160 1004, 1005, 1011, 1018 1050, 1090, 1091, 1097 1098, 1400, 1401 1036, 1044 Grunpy Hallmark 1004 Harley Davidson 1384 1036 Harvard Hisense 1112 1004, 1011, 1012, 1051 Hitachi 1052, 1084, 1085, 1086 1087, 1102, 1225, 1384 1408 1457 1036 1053 1100 1053 HP Ilo IMA Infinity Janeil JBL JC Penney 1000, 1004, 1005, 1007 1012, 1021, 1048, 1049 1058, 1063, 1068, 1072 1073, 1075, 1097, 1098 1002 1004, 1232, 1285, 1314 1376 1011, 1012, 1026, 1049 1052, 1054, 1055, 1080 1092, 1117, 1131, 1235 1288, 1299 Kawasho 1002, 1004 Kenwood 1004, 1018 Kloss Novabeam 1036, 1056, 1057, 1100 KTV 1036, 1097, 1101 JCB Jensen JVC MGA Midland LG Lloyds Loewe Logik Luxman LXI 1005, 1396, 1397, 1398 1399, 1402, 1403, 1404 1405 1384 1053 1001 1004 1000, 1004, 1045, 1053 1058, 1068, 1075 Maganvox 1260, 1302, 1321 Magnavox 1004, 1007, 1018, 1053 1056, 1057, 1059, 1060 1083, 1110, 1147, 1228 1300, 1301, 1326, 1339 1365, 1366, 1371, 1384 1387 1380 1001 1004, 1051, 1053 Magnin Majestic Marantz Media Center 1408 Megatron 1004, 1051 Memorex 1001, 1004, 1005, 1022 1045 1004, 1005, 1018, 1021 1047, 1061, 1062, 1380 1049, 1068, 1097, 1098 1160 1048 1003, 1099 1004, 1005, 1073 Minutz Mitsubishi 1004, 1005, 1018, 1021 1047, 1061, 1062, 1081 1381 Montgomery Ward 1001 Motorola MTC Multitech 1036 NAD NEC Net-Tv Olevia Nikko Norcent NTC Onwa Optimus Optonica Orion 1004, 1058, 1075, 1085 1003, 1004, 1005 1040 1420 1004, 1015 1217, 1320 1015 1036 1085 1064, 1099 1023, 1033, 1107, 1382 1383 Philips Penney Philco Panasonic 1003, 1010, 1049, 1053 1096, 1123, 1152, 1231 1289, 1292, 1295, 1303 1304, 1305, 1306, 1385 1380, 1385 1003, 1004, 1005, 1007 1011, 1018, 1053, 1056 1057, 1059 1003, 1004, 1007, 1011 1017, 1018, 1053, 1056 1057, 1059, 1060, 1063 1110, 1126, 1129, 1148 1155, 1238, 1263, 1264 1265, 1290, 1291, 1307 1308, 1309, 1337, 1389 Philips Magnavox 1260, 1264, 1265, 1266 Pilot Pioneer Polaroid Portland Price Club 1073 1113 Prima Prism 1049 1000, 1008, 1068, 1108 Proscan 1004, 1011 Proton 1160 Pulsar 1004 Pulser Quasar 1003, 1039, 1049, 1096 1165, 1166, 1385 1097 1004, 1085, 1102 1285, 1458 1004, 1005, 1015, 1097 Radio Shack 1000, 1045, 1098, 1384 Radio Shack/Realistic 1004, 1011, 1036, 1045 RCA Runco Sampo Samsung Sansui Sanyo Scotch Scott Sears 1064, 1097, 1098 1000, 1003, 1004, 1005 1008, 1018, 1049, 1065 1066, 1067, 1068, 1069 1070, 1071, 1082, 1102 1104, 1106, 1108, 1115 1151, 1162, 1167, 1168 1268, 1269, 1270, 1271 1310, 1355, 1359, 1361 1370, 1373, 1379, 1380 1381, 1385, 1386 1160 1004, 1097, 1098, 1120 1004, 1005, 1011, 1014 1018, 1019, 1072, 1073 1074, 1097, 1098, 1156 1161, 1297, 1323, 1360 1363, 1364 1023, 1107, 1122, 1273 1382, 1383, 1384 1045, 1062, 1095, 1103 1380 1004 1004, 1011, 1033, 1036 1044 1000, 1004, 1012, 1018 1044, 1045, 1047, 1055 Sharp 1058, 1068, 1075, 1076 1103, 1105, 1384 1004, 1009, 1011, 1025 1064, 1077, 1078, 1097 1099, 1153, 1157, 1274 1298, 1311, 1312, 1362 1375, 1378 Shogun 1004 Signature 1001 1007 Simpson 1002, 1109, 1137, 1201 Sony 1202, 1249, 1272, 1275 1276, 1277, 1278, 1317 1356, 1374, 1384, 1388 Soundesign 1004, 1007, 1036, 1044 Squareview 1105 1036 SSS Starlite 1036 Supre-Macy 1100 1002 Supreme 1004, 1007, 1018, 1027 Sylvania 1056, 1057, 1059, 1060 1124, 1145, 1150, 1153 1279, 1296, 1387, 1464 Symphonic 1024, 1031, 1036, 1105 1280, 1384 1099 1058 1003 1049 Tandy Tashiko Tatung Technics Techwood 1004, 1049 Teknika 1001, 1004, 1005, 1007 1012, 1015, 1036, 1044 1060, 1073, 1096, 1097 1111 1004, 1011 1384 1004 1006, 1045, 1058, 1073 1079, 1093, 1116, 1154 1158, 1159, 1175, 1252 1267, 1281, 1282, 1283 1284, 1286, 1293, 1294 1313, 1315, 1319, 1338 1364, 1377 Tera Thomas TMK Toshiba Totevision 1097 Universal Victor Vidtech Viking Wards 1048, 1063 1055 1004, 1005 1100 1000, 1001, 1004, 1005 1031, 1044, 1048, 1053 1056, 1057, 1059, 1060 1063, 1064, 1118 White Westinghouse 1013 Yamaha Zenith 1004, 1005, 1018, 1001, 1089, 1118, 1125 1161, 1287, 1357, 1382 1383, 1384 HDTV Acer Akai Apex Astar Audiovox Axion Benq Coby Daewoo Dell 1041, 1192 1427, 1432 1088 1434 1455 1459 1136 1460 1135 1141, 1142, 1146, 1394 1395, 1409 1431 1468 1438 1422, 1451 1029 1038, 1449 Element Emerson Emprex Epson Fujitsu Gateway Hewlett Packard 1419, 1444, 1445, 1452 1030, 1132, 1133, 1134 Hitachi 1191, 1208, 1209, 1210 1211, 1212, 1226, 1322 1324, 1328, 1344, 1447 1419, 1445, 1452, 1412, 1435, 1436 1450 1457 1437 1130, 1131, 1227 1343, 1346, 1396 HP Ilo InFocus Initial Insignia JVC LG Magnavox 1329, 1358, 1372, 1414 Maxent Mintek Mitsubishi 1032, 1213, 1229, 1230 1424 1457 1448 1193, 1423 NEC 1040 NET-TV Olevia 1406, 1418, 1421, 1462 Panasonic 1140, 1169, 1170, 1194 1233, 1234, 1331, 1336 1410, 1417, 1442, 1466 1126, 1129, 1236, 1237 1239, 1261, 1334, 1351 1390, 1411 1035, 1195, 1240, 1335 1469, 1470 Pioneer Philips 2059, 2139 2143, 2320 2003 2319 2004, 2322, 2381 Marantz Memorex Microsoft Mintek Mitsubishi 2019, 2123, 2145, 2147 NAD Nakamichi 2116 2322 Nesa 2140, 2256, 2328 Nexxtech 2005, 2117 Norcent 2006, 2219, 2220, 2318 Onkyo Oppo 2323 Oritron 2009 Panasonic 2031, 2066, 2075, 2076 2104, 2105, 2106, 2111 2151, 2153, 2154, 2155 2167, 2179, 2188, 2198 2207, 2211, 2212, 2221 2228, 2248, 2258, 2268 2300, 2318, 2384, 2385 2386, 2398, 2399 2018, 2032, 2033, 2045 2051, 2091, 2109, 2156 2157, 2158, 2159, 2169 2208, 2209, 2222, 2243 2259, 2260, 2264, 2282 2285, 2302, 2304, 2318 2320, 2321, 2404 2008, 2021, 2160, 2164 2191, 2223, 2224, 2267 2310, 2337, 2400 2007, 2377, 2409 Pioneer Philips Polaroid Polk Audio 2320 Presidian 2321 Proscan Qwestar RCA 2010, 2118, 2144, 2205 2319 2009 2010, 2048, 2055, 2063 2077, 2099, 2107, 2118 2161, 2165, 2172, 2177 2181, 2261, 2275, 2281 2287, 2289, 2319, 2322 2331 2119 Sampo Samsung 2012, 2049, 2074, 2085 2102, 2175, 2186, 2196 2214, 2233, 2246, 2274 2279, 2286, 2290, 2294 2295, 2299, 2311, 2314 2333, 2340, 2347, 2351 2071 2034, 2050, 2120, 2393 Sansui Sanyo Sensory Science 2346 Sharp Sungale Sylvania 2013, 2015, 2044, 2082 2086, 2170, 2174, 2292 2321, 2396 Sherwood 2121, 2397 Sony 2014, 2020, 2022, 2065 2067, 2068, 2069, 2070 2087, 2103, 2108, 2113 2162, 2171, 2176, 2178 2182, 2187, 2189, 2192 2193, 2201, 2202, 2203 2226, 2238, 2244, 2251 2257, 2273, 2278, 2280 2288, 2296, 2298, 2305 2306, 2307, 2309, 2313 2315, 2329, 2332, 2338 2355, 2356, 2357, 2405 2406, 2407 2343 2002, 2064, 2078, 2092 2194, 2213, 2321, 2327 2408 Symphonic 2321 Techwood 2141 Toshiba 2023, 2025, 2037, 2038 2040, 2041, 2054, 2080 2084, 2088, 2093, 2094 2168, 2180, 2183, 2184 2185, 2197, 2210, 2227 2231, 2235, 2259, 2271 2276, 2284, 2301, 2318 2334, 2341 2135, 2312, 2348, 2349 2350, 2358, 2401, 2402 2403 Trutech 2345 Urban Concepts 2318 Venturer 2011 Westinghouse 2372 Xbox 2319 2106, 2146, 2163, 2320 Yamaha 2389 2039, 2052, 2128, 2199 2234, 2236, 2252, 2308 2318 Toshiba Zenith Sony Polaroid Sceptre Scott Sharp Proscan Protron Proview RCA Sampo Samsung 1262, 1391, 1392, 1393 1396, 1431, 1440 1000 1430 1407 1143, 1196, 1241, 1242 1038, 1243 1019, 1171, 1172, 1173 1174, 1175, 1197, 1198 1199, 1200, 1245, 1246 1325, 1327, 1352, 1354 1443 1467 1428 1138, 1176, 1177, 1214 1244, 1247, 1248, 1348 1350, 1415, 1416 1037, 1128, 1137, 1178 1215, 1216, 1218, 1219 1220, 1221, 1250, 1251 1316, 1318, 1330, 1347 1413 1446 SVA 1046, 1465 Sylvania Syntax 1418 Syntax-Brillian 1418 Tatung 1426 1127, 1179, 1203, 1204 Toshiba 1222, 1223, 1332, 1340 1341, 1345, 1353 1425 Trutech Viewsonic 1038, 1149, 1180, 1181 1182, 1183, 1184, 1185 1186, 1187, 1188, 1189 1190, 1205, 1206, 1441 1435 1429, 1433, 1439 Viore Vizio Westinghouse 1454 Zenith 1020, 1139, 1207, 1253 1255, 1333, 1342, 1349 RCA Samsung Sharp Sylvania Toshiba 3086, 3087 1151, 2077, 3106 1297, 2214, 3148 1153, 1378, 2086, 2292 3100, 3200 1027, 1124, 1296, 2064 2078, 2213, 3088, 3105 3147 1154, 1158, 1338, 2093 2094, 2094, 3098, 3099 3149 TV-VCR-TUNER COMBO Panasonic 1303, 1303, 1304, 3110 3155, 3156, 3157, 5109 5111 1309, 3161, 5112 Philips TV-VCR-DVD-TUNER COMBO Panasonic 1292, 1295, 2211, 2212 3145, 3146, 5107, 5108 TV-RECEVIER Philips Polaroid 1390, 5138 1393, 5141 DVD 2026, 2131 Aiwa Akai 2378 Amphion MediaWorks 2342 AMW 2342 2001, 2056, 2057, 2061 Apex 2095, 2098, 2229, 2250 2316, 2322, 2330 Apex Digital 2261, 2262, 2263, 2266 2215 2122, 2130, 2215 2336 2269, 2291 2383 2325 2354 2132, 2373, 2388 2379 Apple Arrgo Astar Audiovox Axion Bang & Olufsen 2324, 2370 Blaupunkt 2136, 2322 BOSE BOSE BOSS Broksonic 2053, 2072, 2284 CambridgeSoundWorks 2395 Cinevision 2152, 2195 Clarion Classic Coby Curtis CyberHome 2083, 2325 Cytron Daewoo 2100 2101, 2391 2380, 2387 2387 Denon 2374 2058, 2062, 2137, 2138 2190 2040, 2110, 2133, 2216 2247, 2253, 2317 2344 Desay DiamondVision 2382 Disney 2321 Durabrand 2326 2335 Eclipse Emerson 2002, 2059, 2073, 2321 2327, 2392 2327, 2394 2112, 2134, 2255 2002, 2321, 2327 2346 2041, 2079, 2118, 2261 2272, 2319, 2322, 2046, 2124, 2127, 2129 2230, 2239, 2249, 2346 2114, 2390 GPX 2322 Greenhill Grundig 2320 Harman Kardon 2125 Hitachi ESA Fisher Funai Gateway GE Go Video Ilo Initial Insignia Irradio JVC 2000, 2027, 2126, 2173 2240 2375 2322, 2381 2327, 2369, 2394 2149, 2150 2017, 2028, 2047, 2090 2096, 2097, 2115, 2166 2204, 2206, 2217, 2218 2232, 2242, 2265, 2277 2283, 2359, 2360, 2361 2362, 2364, 2365, 2366 2367 TV-DVD COMBO 1427, 2378 Akai 1163, 2095 Apex Axion 1459, 2379 Bang & Olufsen 1453, 2370 Broksonic 1114, 2053 1460, 2380 Coby Cytron 1456, 2374 DiamondVision 1461, 2382 1226, 2240 Hitachi 1457, 2375 Ilo 1457, 2381 Initial 1288, 2206 JVC LG 1255, 2371 Mintek 1457, 2381 Panasonic 1289, 2207 Philips Polaroid RCA Sansui Sylvania Toshiba 1290, 1291, 1337, 2208 2209, 2243 1440, 1458, 2377, 2409 1115, 1162, 1379, 2063 2099, 2289 1122, 2071 1150, 1464, 2092, 2408 1116, 1293, 1294, 1345 2054, 2210, 2210, 2231 Westinghouse 1454, 2372 TV-DVD-TUNER COMBO Audiovox 1455, 2373, 5152 TV-VCR COMBO Broksonic 1121, 1382, 1383, 3081 Daewoo Emerson GE 3202, 3213 1298, 3150 1382, 1383, 3202, 3213 1164, 1380, 1381, 3090 3201, 3203 1299, 3151 JVC Maganvox 1302, 1321, 3154, 3181 Magnavox 1300, 1301, 3152, 3153 1380, 3201 Magnin MGA 1380, 3201 Mitsubishi 1381, 3203 Orion 1382, 1383, 3202, 3213 Panasonic 1305, 1306, 3158, 3159 Penney Philips Quasar RCA 1380, 3201 1307, 1308, 3152, 3160 1165, 1166, 3091, 3092 1167, 1168, 1310, 1380 1381, 3093, 3094, 3162 3201, 3203 1161, 3089 1382, 1383, 3202, 3213 1380, 3201 1311, 1312, 3163, 3164 1145, 3095 1006, 1006, 1267, 1313 1315, 1319, 3096, 3165 3166, 3167, 3168, 3182 1118, 1382, 1383, 3097 3202, 3213 Samsung Sansui Sanyo Sharp Sylvania Toshiba Zenith TV-DVD-VCR COMBO Magnavox 1339, 2241, 3183, Panasonic 1123, 1152, 2075, 2076 Kenwood 2142, 2148 KLH Konka Koss Lasonic Lenoxx LG 2322 2029, 2030, 2376 2060, 2200 2081 2326 2297, 2303, 2339, 2352 2363, 2368, 2371 2346, 2353 Liteon Magnavox 2002, 2018, 2033, 2089 2237, 2241, 2245, 2259 2270, 2293, 2318, 2320 2321, 2327 DVD-VCR COMBO 2229, 3189 Apex Broksonic 2072, 3082 CineVision 2230, 3242 2062, 3076 Daewoo 2073, 3083 Emerson Go Video 2046, 2127, 2129, 2129 2230, 2239, 3066, 3109 3110, 3188, 3193, 3221 2126, 2173, 3117, 3169 2369, 3239 2047, 2097, 2166, 2166 Hitachi Insignia JVC 5085, 5086, 5087, 5130 5131, 5140 5144 Philips Optimus Panasonic 5019, 5020, 5107, 5108 5109, 5110, 5111, 5115 5126 5000, 5112, 5138, 5143 5145, 5154 5021, 5022, 5088, 5089 5090, 5091, 5092, 5093 5094, 5119, 5120, 5144 5147 Polaroid 5141 Polk Audio 5143 RCA Pioneer Rotel Samsung Sansui Sherwood 5027 Sony Technics Thorens Wards Yamaha 5024, 5025, 5026, 5137 5144 5150 5139 5000, 5143 5017, 5023, 5028, 5029 5030, 5031, 5032, 5033 5095, 5096, 5097, 5113 5117, 5121, 5125, 5129 5133, 5134, 5136, 5146 5016, 5019, 5020, 5098 5099, 5100, 5101, 5115 5122, 5126 5145 5000, 5021, 5143 5003, 5014, 5015, 5021 5102, 5103, 5104, 5105 5106, 5118, 5135 6014, 6039, 6057 6002 6028, 6045 6016, 6021 AMPLIFIER 6055 Adcom 6003, 6020 Aiwa 6002 Carver Citizen 6026 Curtis Mathes 6046 Denon Fisher GE Goldstar Harman/Kardon 6047 Harmon/Kardon 6013 6034 Hitachi 6050 JBL JVC 6018, 6024, 6041 Kenwood 6015, 6022 Left Coast 6047 Magnavox 6035 Marantz Nakamichi 6012 NEC Onkyo 6000, 6047, 6058 6033, 6048 6005, 6006, 6017, 6054 6056 Optimus 6008, 6046 Panasonic 6001, 6040 Parasound 6059 6047 Philips 6004, 6009, 6010, 6023 Pioneer 6036, 6046, 6051 Polk Audio 6047 Proton 6035 6001 Quasar 6025, 6046 RCA Sharp 6029, 6030, 6031, 6032 Sherwood 6011 Shure 6048 Sony 6020, 6042, 6044, 6049 Soundesign 6045 6019 Teac 6001 Technic Technics 6001, 6040 6027 Toshiba 6024 Victor 6045 Wards 6007, 6037, 6038, 6043 Yamaha 6052, 6053 2232, 2359, 2360, 2361 2362, 2364, 2365, 2366 2367, 3067, 3118, 3170 3171, 3194, 3228, 3229 3230, 3231, 3234, 3235 3236, 3237 2363, 2368, 3233, 3238 LG Magnavox 2237, 3190 Panasonic 2066, 2167, 2228, 3078 Philips Polaroid RCA Samsung Sanyo Sharp Sony Toshiba Zenith 3172, 3191 2051, 2169, 3071, 3173 2007, 3111 2048, 2165, 2172, 3068 3174, 3175 2049, 2074, 2085, 2233 2290, 2311, 2311, 3069 3084, 3101, 3184, 3214 3218, 3232 2050, 3070 2170, 2174, 3176, 3177 2065, 2067, 2067, 2171 2238, 2244, 2244, 2355 2356, 2357, 3085, 3104 3178, 3179, 3187, 3192 3224, 3225, 3226, 3240 2080, 2080, 2084, 2168 2235, 2312, 2358, 3102 3103, 3180, 3185, 3219 3227, 3241 2052, 2128, 2234, 2236 3072, 3119, 3186, 3186 VCR 3223 ABS Admiral 3001 Adventura 3021 3021 Aiwa Akai 3003, 3055, 3058 Alienware 3223 Apex 3189 Audio Dynamics 3005, 3006 Bang & Olufsen 3222 Bell & Howell 3007 Broksonic 3081, 3082, 3202, 3213 Candle 3011, 3013, 3014 Carver 3036 CineVision 3242 Citizen Colortyme 3005 Curtis Mathes 3000, 3005, 3014, 3212 CyberPower 3223 Cyperpower 3223 Daewoo 3011, 3013, 3021, 3076 3120, 3150 3005, 3006 DBX Dell 3223 Dimensia 3000 DIRECTV 3246 Dish Network 3247, 3248 3247 Dishpro Dynatech 3021 Echostar Electrohome 3023 Emerson 3011, 3013, 3014 3247, 3248 3003, 3011, 3021, 3023 3038, 3083, 3202, 3202 Expressvu 3247 Fisher Fuji Funai Garrard Gateway GE Go Video 3007, 3029, 3030 3058 3002, 3021 3021 3223 3000, 3059, 3090, 3201 3203, 3212 3066, 3073, 3109, 3110 3188, 3193, 3221 3247 3005, 3014 GOI Goldstar Gradiente 3021 Harley Davidson 3021 Harman Kardon 3005 Headquarter 3007 Hewlett Packard 3223 Hitachi 3052, 3055, 3059, 3117 3169 HNS 3243 Howard Computers 3223 3223 HP 3247 HTS 3246, 3250 Hughes Humax 3246 Hush 3223 iBUYPOWER 3223 Insignia 3239 JC Penney 3005, 3006, 3007, 3030 Jensen JVC 3036, 3052 3055 3005, 3006, 3007, 3014 3055, 3060, 3067, 3118 3121, 3122, 3123, 3124 3125, 3126, 3127, 3151 3170, 3171, 3194, 3205 3228, 3229, 3230, 3231 3234, 3235, 3236, 3237 3247, 3248, 3250 Kenwood 3005, 3006, 3007, 3014 LG Linksys Lloyds 3055, 3060 3233, 3238 3223 3021 Magnin Marantz Maganvox 3154, 3181 Magnavox 3036, 3037, 3051, 3061 3128, 3152, 3153, 3183 3190, 3206, 3211 3201 3005, 3006, 3007, 3014 3036 Media Center PC 3223 Memorex 3001, 3004, 3007, 3021 3051 3023, 3038, 3201 3223 3223 3052 MGA Microsoft Mind Minolta Mitsubishi 3023, 3038, 3039, 3060 3108, 3203 Montgomery Ward 3001 Motorola 3001 Multitech 3021 NEC 3005, 3006, 3007, 3014 3055, 3060 Niveus Media 3223 Northgate 3223 3001 Optimus 3047 Optonica Orion 3004, 3202, 3213 Panasonic 3053, 3062, 3063, 3077 3078, 3079, 3086, 3087 3107, 3129, 3130, 3131 3132, 3133, 3134, 3145 3146, 3155, 3156, 3157 3158, 3159, 3172, 3191 3197, 3207, 3212, 3253 3201, 3212 3052, 3059 Penney Pentax Pentex Research 3014 Philco Philips 3036, 3037 3036, 3047, 3061, 3071 3135, 3160, 3161, 3173 3208, 3216, 3243, 3244 3246, 3250, 3251 Philips Magnavox 3135 Pioneer Polaroid Portland Proscan Pulsar Quarter Quartz Quasar Radio Shack 3001, 3047 Radio Shack/Realistic 3007, 3021, 3023, 3029 3006, 3060 3111 3013 3000 3051 3007 3007 3062, 3091, 3092, 3212 RCA Realistic 3047 3000, 3003, 3040, 3041 3042, 3052, 3059, 3062 3068, 3075, 3093, 3094 3106, 3136, 3162, 3174 3175, 3199, 3201, 3203 3206, 3212, 3243, 3249 3250 3001, 3007, 3011, 3021 3023, 3029, 3047 Sharp Sanky Sansui Sanyo Scott Sears ReplayTV 3252 Ricavision 3223 3064 Ricoh Runco 3051 Samsung 3011, 3069, 3084, 3089 3101, 3148, 3184, 3214 3215, 3218, 3232, 3243 3001, 3051 3004, 3006, 3055, 3060 3202, 3211, 3213 3007, 3070, 3201 3011, 3038 3007, 3029, 3030, 3052 3211 3001, 3013, 3023, 3047 3080, 3100, 3137, 3163 3164, 3176, 3177, 3200 3048, 3058 Shintom Signature 3001 3064 Singer 3048, 3049, 3058, 3085 Sony 3104, 3138, 3139, 3140 3178, 3179, 3187, 3192 3195, 3209, 3211, 3217 3223, 3224, 3225, 3226 3240, 3245 3223 3223 3052 3021, 3036, 3037, 3038 3061, 3088, 3095, 3105 3147 Stack Stack 9 STS Sylvania Symphonic 3002, 3021 Systemax 3223 Tagar Systems 3223 3007 Tandy 3055 Tatung 3021, 3042, 3055 Teac Technics 3053 3021, 3050 Teknika 3211 Thomas 3074, 3244, 3245, 3246 Tivo 3249, 3250 3011, 3029, 3030, 3038 3096, 3098, 3099, 3102 3103, 3141, 3142, 3149 3165, 3166, 3167, 3168 3180, 3182, 3185, 3210 Toshiba 3219, 3220, 3223, 3227 3241 3223 3006 Touch Vector Research 3005, 3006, 3011 Victor Video Concepts 3005, 3006, 3011 Viewsonic 3223 3223 Voodoo 3001, 3011, 3021, 3023 Wards 3047, 3052 White Westinghouse 3002 XR-1000 3021 3005, 3006, 3007, 3014 Yamaha 3055 3048, 3051, 3058, 3064 3072, 3097, 3119, 3143 3144, 3186, 3196, 3198 3202, 3204, 3211, 3213 3223 ZT Group Zenith 2130, 2215, 4000, 4000 HTIB Apex 2316, 4049 Audiovox 2388, 4053 BOSE CambridgeSoundWorks 2395, 4060 Classic 2391, 4055 2387, 4052 Coby 2387, 4056 Curtis 2216, 4012 Denon 2392, 4057 Emerson GPX 2390, 4055 2394, 4059 Insignia 2043, 4001 JBL 2035, 2217, 2218, 2283 JVC 4002, 4013, 4014, 4028 2060, 2200, 4003, 4015 Koss LG 2303, 4041 Magnavox 2293, 4035 Onkyo 2024, 2219, 2220, 4004 4016, 4017 Philips Panasonic 2104, 2221, 2300, 2384 2385, 2386, 4005, 4018 4030, 4038, 4050, 4050 4051 2036, 2222, 2282, 2304 4006, 4019, 4027, 4039 4042 2016, 2223, 2224, 4007 4020, 4021, 4029 2042, 2161, 2281, 4008 4008, 4026 Pioneer RCA Samsung 2294, 2295, 2299, 2314 4033, 4033, 4036, 4047 2393, 4058 Sanyo 2396, 4061 Sharp Sherwood 2397, 4062 Sony 2108, 2113, 2225, 2226 2278, 2288, 2296, 2305 2306, 2307, 2315, 4009 4010, 4022, 4023, 4024 4031, 4032, 4034, 4043 4044, 4045, 4046, 4048 2227, 4025, 4040 2011, 4011 2389, 4054 4037 Toshiba Venturer Yamaha Zenith REC-TUN ADC Aiwa 5144 5000, 5001, 5002, 5004 5005, 5006, 5034, 5143 Akai 5083 Audiotronic 5145 Audiovox 5152 Bang & Olufsen 5151 BOSE 5007 Capetronic 5144 Carver Denon 5000, 5143, 5145 5008, 5035, 5036, 5037 5038, 5039, 5040, 5041 5042, 5043, 5044, 5045 5046, 5047, 5048, 5049 5050, 5051, 5052, 5053 5054, 5114, 5124 Eclipse 5149 Gradiente 5153 Harman/Kardon 5000, 5009, 5055, 5056 JBL JVC 5142, 5143 5009 5010, 5057, 5058, 5059 5116 Kenwood 5011, 5012, 5013, 5060 5061, 5062, 5063, 5064 5065, 5066, 5067, 5068 5123, 5127, 5128, 5132 5148 5000, 5143 Linn Magnavox 5000, 5143, 5144, 5145 Marantz 5000, 5069, 5143, 5145 Mitsubishi 5070, 5071, 5072 Onkyo 5018, 5073, 5074, 5075 5076, 5077, 5078, 5079 5080, 5081, 5082, 5084 AT&T RC1534819 (12 Jun 2008).ind2 2 6/12/2008 1:36:48 PM
1 | Agent authorization letter | Cover Letter(s) | 40.25 KiB |
May 5, 2008 Power of Attorney To Whom It May Concern:
We, the undersigned, Philips Electronics Singapore Ptd Ltd. hereby authorize Compliance Certification Services Inc. to act on our behalf in all matters relating to all processes required in the FCC Part 15, Subpart C approval of FCC ID: RCSTX100001 and any communication needed with the national authority. Any and all acts carried out by Compliance Certification Services Inc.on our behalf shall have the same affects as acts of our own. If you have any questions regarding the authorization, please dont hesitate to contact us. Thank you Sincerely yours, Mr. David Tan / Senior Project Manager LoB Home Control (Unit Singapore) Philips Electronics Singapore Ptd Ltd.
1 | Authorization letter | Cover Letter(s) | 35.00 KiB |
Philips Eloctronies Singapore Pte Lid. Philips Electronics Singapore Ptd Ltd. Bldg TP1, Level 2, 620A Lorong 1 Toa Payoh, Singapore To whom it may concern:
I, the undersigned, hereby authorize David Tan of Philips Electronics Singapore Ptd Ltd., to act on my behalf in all manners relating to application (FCC ID:RCSTX100001) for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by David Tan of Philips Electronics Singapore Ptd Ltd. on our behalf shall have the same effect as acts of our own. This authorization is valid until further written notice from the applicant. Sincerely Yours, hilips Electronics Singapore Ptd Ltd. Steven Puah , Chief Engineer REMARK:
1, This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database.
1 | Confidentiality request letter | Cover Letter(s) | 28.70 KiB |
PHILIPS Philips Electronics Singapore Pte Ltd Philips Electronics Singapore Pte Ltd Philips Consumer Lifestyle BU Peripheral & Accessories - LoB Home Control Federal Communications Commission Equipment Approval Service Attn: Authorization and Evaluation Division Reference: FCC ID: RCSTX100001 May 05, 2008 To Whom It May Concern:
Pursuant to Sections 0.457 (d) (1) (ii) and 0.459 of the Commission rules, the Applicant hereby requests confidential treatment of Philips Electronics Singapore Ptd Ltd. supplied information accompanying this application. The confidential information includes the following:
Theory of Operation Schematics Block Diagram The material contain trade secrets and propriety information not customarily released to the public. Public disclosure of this information might be harmful to Philips Electronics Singapore Ptd Ltd. and provide unjustified benefits to our competitors. Philips Electronics Singapore Ptd Ltd. understands that pursuant to 0.457 (d)(1)(ii), disclosure of application and all accompanying documentation will not be made public before the grant date. Sincerely, David Tan/ Senior Project Manager Philips Electronics Singapore Ptd. Ltd 620A Lorong 1 Toa Payoh Building TP1, Level 2, Singapore 319762 Telephone: (65) 68823000 Fax + (65) 62541691
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2008-06-24 | 2402 ~ 2480 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2008-06-24
|
||||
1 | Applicant's complete, legal business name |
Philips Electronics Singapore Pte Ltd
|
||||
1 | FCC Registration Number (FRN) |
0009359381
|
||||
1 | Physical Address |
Home Control, Test & Validation, Philips Consumer Lifestyle, 620A Lorong 1
|
||||
1 |
Home Control, Test & Validation
|
|||||
1 |
Toa Payoh, Building TP1, Level 2,
|
|||||
1 |
Singapore
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
m******@ccsemc.com
|
||||
1 | TCB Scope |
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
RCS
|
||||
1 | Equipment Product Code |
TX100001
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
T******** C******
|
||||
1 | Title |
Senior Engineer
|
||||
1 | Telephone Number |
65688********
|
||||
1 | Fax Number |
65625********
|
||||
1 |
T******@philips.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | AT&T IR U-verse TV Remote Control | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Compliance Certification Services (Shenzhen) Inc.
|
||||
1 | Name |
C**** K******
|
||||
1 | Telephone Number |
867-5********
|
||||
1 | Fax Number |
867-5********
|
||||
1 |
c******@tw.ccsemc.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC