FCC ID: 2ASKH-1928 StealthNet 1928

User Manual StealthNet 1928 Part #77-7900 Part #77-7910 Part #77-7920 Part #77-7930 StealthNet 1928 User Manual Rev A USER MANUAL STEALTHNET 1928 Table of Contents 1. Introduction .......................................................................................................................................... 2 2. Hardware Features ............................................................................................................................... 3 Solution Highlights ................................................................................................................................ 3 Powerful Cost Saving Tools ................................................................................................................... 3 3. Technical Specifications ........................................................................................................................ 4 4. Mechanical Details ................................................................................................................................ 6 4.1 Top/Side Dimensions .................................................................................................................... 6 Federal Communication Commission Interference Statement .................................................................... 7 IMPORTANT NOTE: FCC Radiation Exposure Statement ...................................................................... 7 Industry Canada Statement .......................................................................................................................... 8 Radiation Exposure Statement: ............................................................................................................ 8 5. Company Information ........................................................................................................................... 9 2023 Phillips Connect LLC StealthNet 1928 User Manual Page 1 of 9 USER MANUAL STEALTHNET 1928 1. INTRODUCTION The StealthNet 1928 4G LTE Asset Tracking Gateway from Phillips Connect is a vehicle tracking device that combines GPS location with LTE and Bluetooth. StealthNet 1928 monitors vehicle and asset functions and collects data for tracking and analysis. The StealthNet 1928 Gateway appears to the user of a server application as a single endpoint device. It can be queried, updated, and configured either through a serial connection or an over-the air (OTA) LTE IP connection. StealthNet 1928 presents itself over the connections as an enhanced cellular modem with attached functional elements. These elements include:

GPS location engine PCTBus proprietary communication over TIA-485-A CAN Communication BLE 5.2 General Purpose Bidirectional I/O (GPIO) pins The following is a typical application scenario:

2023 Phillips Connect LLC StealthNet 1928 User Manual Page 2 of 9 USER MANUAL STEALTHNET 1928 2. HARDWARE FEATURES The StealthNet 1928 Gateway ships from the factory pre-configured for a specific set of functions and can be configured and commissioned in the field, while providing support for external control through a Phillips Connect proprietary set of commands. Supported features include the following:

Solution Highlights Manage and view your assets in the cloud-based Remote Listening System Real-time visibility and simple geofencing Automated alerts configurable in the Remote Listening System Scalable Bluetooth Connectivity - Easily add sensors as they become available Up to 6 months of reporting (on fully charged battery, stationary asset) Flawless operation in the harshest temperatures 5-minute reporting when in motion 2 reports per day when parked Powerful Cost Saving Tools Do more with fewer trailers Optimize trailer pool management Automate yard checks Covert installations help eliminate trailer theft and cargo loss Manage detention billing Improve driver satisfaction 2023 Phillips Connect LLC StealthNet 1928 User Manual Page 3 of 9 USER MANUAL STEALTHNET 1928 3. TECHNICAL SPECIFICATIONS CELLULAR SUPPORT LTE-FDD: Bands B2/B4/B12 WCDMA: Bands B2/B4/B5 GLOBAL NAVIGATION SATELLITE SYSTEM (GNSS) Supported Satellite Systems:

GPS GLONASS BeiDou (COMPASS) Galileo QZSS Accuracy: Circular probable error (CEP-50) with Open Sky, <2.5 meters Additional Features: Assisted GPS; WAAS Support SENSOR DATA INTERFACES Bluetooth 5.2 TIA-485-A Protocol: PCTBUS CANBus 2.0B SAE J1939 ISO 14229 GPIO: 1 Channel ELECTRICAL / POWER MANAGEMENT Operating Voltage: 10V 32VDC Peak current draw from tractor: 1.65A @ 12V Battery charger draw: 1A Sensor draw: 500 mA Telematics draw: 150 mA Power supply to sensors: 12V/500 mA Battery Type: Li-ion, rechargeable Nominal Capacity: 19.2 Ah Nominal Voltage: 4.2V Cell Cycle Life: 1000 cycles; 80% retention Power management modes: Normal (Full power), Listen, Stealth 2023 Phillips Connect LLC StealthNet 1928 User Manual Page 4 of 9 USER MANUAL STEALTHNET 1928 ENVIRONMENTAL Ingress Protection Ratings: IP67; IP69K Operating Temperature: -40F to 149F (-40C to 65C) Storage Temperature: -40F to 113F (-40C to 45C) Battery Charging Temperature: -4F to 131F (-20C to +55C) Operating Humidity: 20% to 90% (non-condensing) Storage Humidity: 10% to 95% (non-condensing) MECHANICAL Dimensions: 7.50 (L) x 4.44 (W) x 2.44 (H) (164mm x 80mm x 39mm) Weight: 1.48 lbs. (669g) HARNESS OPTIONS Application dependent CERTIFICATIONS FCC / IC PTCRB Cellular INTEGRATED: GATEWAY SENSORS Orientation Vibration Temperature Battery Voltage Primary Input Voltage Secondary Input Voltage GNSS Location GNSS Odometer Device Time via GNSS and NITZ 2023 Phillips Connect LLC StealthNet 1928 User Manual Page 5 of 9 USER MANUAL STEALTHNET 1928 4. MECHANICAL DETAILS 4.1 TOP/SIDE DIMENSIONS All measurements are in inches. 2023 Phillips Connect LLC StealthNet 1928 User Manual Page 6 of 9 USER MANUAL STEALTHNET 1928 FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is Increase the separation between the equipment and receiver. connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: FCC Radiation Exposure Statement This equipment complies with the FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. The transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2023 Phillips Connect LLC StealthNet 1928 User Manual Page 7 of 9 USER MANUAL STEALTHNET 1928 INDUSTRY CANADA STATEMENT This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas license-exempt RSS(s). operation is subject to the following two conditions:

(1) This device may not cause interference

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetterur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicable aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique sub, mme si le brouillage est susceptible den compromettre le fonctionnement. Radiation Exposure Statement:

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. 2023 Phillips Connect LLC StealthNet 1928 User Manual Page 8 of 9 USER MANUAL STEALTHNET 1928 5. COMPANY INFORMATION Technology that moves us forward Phillips Connect Technologies LLC 5231 California Ave. Suite 110 Irvine, CA 92617 Technical Support 1-833-213-5839 Support@Phillips-Connect.com Sales 1-833-213-5839 PCT-Sales@Phillips-Connect.com Careers COPYRIGHT NOTICE 2023 Phillips Connect Technologies LLC. All rights reserved. Phillips Connect Technologies LLC reserves the right to modify the units, specification, or this document without prior notice in the interest of improving performance, reliability, or servicing. Reasonable efforts have been made to assure the accuracy of this document; however, Phillips Connect Technologies assumes no liability resulting from any inaccuracies or omissions in this document, or from use of the information herein. Product updates may result in differences between the information provided in this document and the product shipped. Please contact Phillips Connect Technologies LLC for access to the most current documentation. No part of this document or information within this document may be copied, reproduced, distributed, merged, or modified without the express written consent of Phillips Connect Technologies LLC. 2023 Phillips Connect LLC StealthNet 1928 User Manual Page 9 of 9 FCCStatement Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1) Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived, includinginterferencethatmaycauseundesiredoperation.Thisequipmenthasbeentestedandfoundto complywiththelimitsforaClassBdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsare designedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.This equipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedin accordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.However,there isnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescause harmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoff andon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:

Reorientorrelocatethereceivingantenna. Increasetheseparationbetweentheequipmentandreceiver. Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected. Consultthedealeroranexperiencedradio/TVtechnicianforhelp. Changesormodificationsnotexpresslyapprovedbythemanufacturercouldvoidtheusersauthorityto operatetheequipment. FCC RF Radiation Exposure Statement ThisequipmentcomplieswithFCCradiationexposurelimitssetforthforanuncontrolledenvironment.To complywithFCCRFExposurecompliancerequirements,thisgrantisapplicabletoonlyMobile Configurations.Theantennasusedforthetransmittermustbeinstalledtoprovideaseparationdistanceof atleast20cmfromallpersonsandmustnotbecolocatedoroperatinginconjunctionwithanyother antennaortransmitter. 6 ISED Warning statements This device complies with Canada's licence-exempt RSSs. Operation is subject to the following two conditions:

(l) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradiolectriquesubi, mmesi le brouillageest susceptible d'encompromettre le fonctionnement. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. Pour se conformer aux exigences de conformit CNR 102 RF exposition, une distance de sparationd'aumoins 20 cm doittremaintenue entre l'antenne de cetappareilettoutes les personnes. This Class B digital apparatus complies with Canadian ICES-003. Cetappareilnumeriquede la classe B estconforme a la norme NMB-003 du Canada.

Phillips Connect Technologies, LLC POWER OF ATTORNEY DATE: 2024-1-12 To:

Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 We, the undersigned, hereby authorize TA Technology (Shanghai) Co., Ltd.

/Yu Hongmei on our behalf, to apply to FCC on our equipment for FCC ID:

2ASKH-1928. Any and all acts carried out by TA Technology (Shanghai) Co., Ltd. / Yu Hongmei on our behalf shall have the same effect as acts of our own. Sincerely, Signature Print name: Doug Reauso

Phillips Connect Technologies, LLC Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 01-12-2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2ASKH-1928 Phillips Connect Technologies, LLC certifies that the equipment for which authorization is sought is notcovered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature Print name: Doug Reauso Rev 1/26/2023

(Phillips Connect Technologies, LLC) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 01-12-2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2ASKH-1928 Phillips Connect Technologies, LLC certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Signature Print name: Doug Reauso Rev 1/26/2023

Phillips Connect Technologies, LLC Request for Confidentiality Date: _2024-1-12_ Subject: Confidentiality Request for: _ FCC ID: 2ASKH-1928 __ Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent*1 Permanent Permanent Permanent Permanent Permanent*

Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Schematics Tune-Up Procedure Test Setup Photos Users Manual

*Note: ______(Insert Explanation as Necessary)______ _ Phillips Connect Technologies, LLC _ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. NOTE for Industry Canada Applications:

The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By:

Doug Reauso

(Signature/Title2)

(Print name)

[Phillips Connect Technologies, LLC]

[5231 CALIFORNIA AVE PO Box 110, Irvine, CA, United States]

Date: [1/12/2024]

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: [2ASKH-1928]

FRN: 0028264505 US Agent Attestation Statement / Part 2.911(d)(7)

[Phillips Connect Technologies, LLC] certifies, that as of [1/12/2024], we have designated Phillips Connect Technologies, LLC to accept service of process on our behalf for FCC ID: [2ASKH-1928].

[Phillips Connect Technologies, LLC], accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-

related administrative or judicial proceeding involving the equipment, whichever is later. Phillips Connect Technologies, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of [Phillips Connect Technologies, LLC] for FCC ID: [2ASKH-1928]. Designated Agent Information:

Company Name: Phillips Connect Technologies, LLC FRN: 0028264505 Address: 5231 CALIFORNIA AVE PO Box 110, Irvine, CA, United States Contact Person: Doug Reauso Email: dreauso@phillips-connect.com Sincerely, Company: [Phillips Connect Technologies, LLC]

Company Representative: [Doug Reauso] Designated Agent Representative: Doug Reauso Designated Agent: Phillips Connect Technologies, LLC Signature:

Signature: