CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. WIRELESS SPEAKER HAUT-PARLEUR SANS FIL PB55700TX
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. RF Radiation Exposure Statement:
1.This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2.This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
TO CHARGE THE UNIT:
Before using the speaker for the rst time, charge it for a minimum of 6 hours. Connect the micro USB plug to the micro USB charging port on the back of the unit. TO PAIR YOUR DEVICE:
1. Turn the unit on. The speaker will beep twice and glow blue. 2. Turn on Bluetooth capability on your device and make it discoverable. 3. Select the speaker name from the list to connect. While the unit is connecting it will ash blue. 4. Once paired with a device, the blue light on the unit will glow and beep once. 5. When youre done listening, turn off the speaker. A warning that batteries shall not be exposed to excessive heat such as sunshine, fire or the like. RF Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Dclaration dexposition aux radiations:
Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. POUR CHARGER LE HAUT-PARLEUR :
Vous devez charger le haut-parleur pour une dure mini-
mum de 6 heures avant de lutiliser pour la premire fois. Insrez le cble micro USB dans le port USB larrire du haut-parleur. POUR LE JUMELAGE DU HAUT-PARLEUR VOTRE APPAREIL :
1. Allumez le haut-parleur. Il mettra alors deux signaux sonores et une lumire bleue sallumera. 2. Activez le paramtre Bluetooth sur votre appareil. 3. Slectionnez le nom du priphrique (haut-parleur) dans la liste pour vous connecter. Durant la connexion, la lumire bleue du haut-parleur clignotera. 4. Une fois que vous aurez jumel votre appareil au haut-parleur, sa lumire bleue sallumera et mettra un seul signal sonore. 5. Lorsque votre coute sera termine, teignez le haut-parleur. Canada, Industrie Canada (IC) This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de classe B est conforme la norme NMB-003. This device complies with Industry Canada licence-
exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables auxappareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes: (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage audiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. LED INDICATOR Charging Mode: Red light on Fully charged: Red light off Pairing Mode: Blue LED ashes quickly Connected: Blue LED ashes slowly Playing: Blue LED stays on TECHNICAL SPECS Bluetooth Standard: 2.1+ EDR Bluetooth Agreement: A2 DP Working Distance: 10 ft. Charging: 5Vdc, 800mA Frequency Range: 100Hz-18KHz S/N Ratio 80Db Distortion Factor 0.5%
Playing Time: 2-3 hours Charging Time: 3 hours, at least 6 hours the rst time SAFETY AND GENERAL INFORMATION Do not expose the device to water or attempt to dissemble the device. If exposed or disassembled, user may be at risk from electric shock. Handle this product with care, without proper care the device may not function properly. Do not use this product in aircrafts or hospitals. Do not expose the device under the sunlight directly. Device may get warm during charging. TMOIN LED En mode chargement : voyant rouge allum Charg 100 % : voyant rouge teint En mode jumelage : clignotement rapide du tmoin LED bleu Connect : clignotement lent du tmoin LED bleu En marche : tmoin LED bleu allum PRCISIONS TECHNIQUES Normes Bluetooth : version 2,1+ EDR Entente Bluetooth : DP A2 Porte : 10 pieds Recharg: 5Vdc, 800mA chelle de frquence : 100 Hz -18 kHz Ratio S/N 80 Db Coefcient de distorsion 0,5 %
Dure de fonctionnement : 2-3 heures Temps de recharge : 3 heures, 6 heures la premire fois RENSEIGNEMENTS GNRAUX ET SCURIT Pour viter tout risque de dcharge lectrique, ne pas exposer lappareil leau et ne pas tenter de le dmonter. Pour un bon fonctionnement de lappareil, manipuler avec soin. Ne pas utiliser dans les hpitaux et les avions. Ne pas exposer ce produit au soleil. Pourrait devenir chaud durant le chargement.