The Mini BT headset is a wireless headset for mobile phones with Bluetooth technology. Bluetooth technology is a standard for wireless data communication over a short distance. Headsets and Bluetooth compatible mobile phones can be wirelessly connected up to a distance of 10 meters. This product is a Bluetooth-compatible headset that fulfills the conditions as required by Bluetooth 1.2 protocol. Two profiles are supported: devices equipped with headset and hands-free profiles. Therefore, the headset functions with all suitable Bluetooth devices that support the headset and/or hands-free profiles. Bluetooth Headset Description BHM-121 BHM-110 1. Microphone 2. S1 button 3. S2 button 4. S3 button 6. Ear band 7. Earphones/speakers 8. Blue LED indicator 5. Charging terminal 9. Red LED indicator Charging the headset Before using the headset for the first time, need to charge the headset with the supplied power supply unit for at least 2 hours.
headset.
headset as described. Functions of the S1, S2, and S3 buttons:
S1:
S2:
S3:
S2+S3:
Switching the headset on/off
the headset flashes red briefly, and the headset shuts off. Adjusting the headset to your mobile phone (pairing) You must introduce both components to enable the headset to communicate with your telephone. This process is known as pairing or coupling and is the basis for using the Bluetooth headset. Pairing only has to be carried out once before the headset is commissioned for the first time. Ensure that the headset is fully charged and the power supply is not plugged into the headset. Prepare your telephone for the pairing process. Follow the instructions in the operating manual of your mobile phone to switch your telephone to Bluetooth mode and initiate and perform the coupling procedure.
red and blue alternately. The headset is now in pairing mode. Please note: The headset maintains pairing mode for 5 minute. After this time, it must be started again as described.
your phone. Follow the instructions on your phones display.
shown on the phones display.
operating instructions of the phone. 3
Use/Call management
Accepting, ending, and rejecting calls
Making calls
4 Making calls using voice dialing To make calls using voice dialing, the corresponding voice profiles must be set up/stored in your phone. Your telephone must also support this function in Bluetooth mode (hands-free profile only). For more information, please refer to the operating instructions of your mobile phone. Voice dialing using the headset operates in the same manner as if you were making a call using the phone. The only difference is that voice dialing is activated using the headset, not the phone.
Waiting calls Press the S1 button to accept a waiting call during another call. Switching off the sound of the microphone During a call, the microphone on the headset can be set to mute. This can be used, for example, to hold confidential conversations with another person or make inquiries that the person on the phone cannot hear. To do so, press the S2 and S3 buttons simultaneously the microphone will be deactivated. To switch the sound of the microphone back on, press the S2 and S3 buttons at the same time again -
the microphone will be re-activated. 5 Please note :
With some mobile phones, the connection between the telephone and the headset is automatically disconnected after a certain period, or the devices must be connected manually after both devices (headset and mobile phone) are switched on. If this is the case, no call signal is heard via the headset for incoming calls. To establish the connection for incoming calls, press the S1 button. Volume control Press the volume buttons (S2, S3) to set the volume of the headset as
Precautionary measures and caring for your Bluetooth headset
accepting calls unintentionally.
housing of the headset.
6