FCC ID: YYOT10IN-US59 Cell Phone Signal booster

INVL/ILL user S Mianuval Internal No. TIOIN-NA Index Safety Guidelines -----------------------------------------

nei FTrOQUCL SPECHICAUlONs Packag Contents +202 cssssrsttceemececseeese sees seeeee Introduction of the Tower Signal Booster and the Power Feed Box - - - - - - - - - -

lnetallatian Steno = @ = s Sees @ ew oe wo So Se eee Se eo Sl a emer eee Troubleshooting Instructions of Signal Aavisor APP Safety Guidelines bet te se caf RS PN WVAGEWTETISTES Chanaes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Mis equipment Nas Deen tested ana founda to comply with te umes TOF a Ulass B aigital aevice, pursuant tO Fall to OF the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. mav cause harmful interference to radio communications. However. there is no Quarantee that interference will not occur in a narticular inctallation If thic equinment doec caiice harmfii! interference to DES oe tee Bessie wap aiawcy Enis. hisw ee Pn me UY WY CUTOUTS TREICreHiee MY VIS Ul THOS Ul THe PONOWINY He aoures. Reorient or relocate the receiving antenna

-- Increase the separation between the equipment and receiver. Ce a er

~~ MOMMECE TIE SQUIPINent HMO all OUUEL OFl dad CICUIN GHTErent TrOMml Ulat LO Willer He FeCever is connected.

-- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including ee ae spice acc aces eatpucensaay euiar ciemcco Miner sxacegouss TILE EIRPCHee Ula Hay CaUot UMC SH EU UPS Gault. Radiation Exposure Statement Thie eniinment camniieec with BCC radiatiann eynacire limite cet farth far an uncantralled enviranment Thic beemecemeerieaa ces Tae: teas equipment should be installed and operated with minimum distance 20cm between the radiator and your boay. Consumer Signal Booster Warning Label:

If the booster has this label (all consumer boosters sold after March 1, 2014, and some sold prior will have this label):

BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of siqnal boosters. Some providers mav not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables aR I RR a Tan ea Sale 9S cae a ae ame erating saith acetthie SAO sap eli ale a sa ater ne east ll aap nas least 20 cm cs inches) from any person. Vou; MUST ceace onerating thic device immediately if requected hy the nsed wireless si provic WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device. This device may be operated ONLY in a fixed location for in-building use. ind T-Mobile have approved all boosters that contain pproval agai the label, so you do not need to gi 1 Verify that vour provider has aiven nermicsion (eq ATRT Snrint TMohile Verizon) or elee cet nermission from vour Fame SNA Bee wireless provider to use it. 2.Register your booster with your wireless provider before turning it on. Each wireless provider that gives permission for honctere to he 1icad miict nrovide a free renictratinn cvetam IC Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1)This device may not cause interference; and (2) This device must accept any interfer-ence, including interference that mav cause undesired operation of the device. The term IC: before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications. MhAls equipment compues with ISEV radiation exposure umits set forth ror an uncontrovea environment. his equipment snould be installed and operated with minimum distance 20cm between the radiator & your boay. Ree (Inee\ 2h. VEE GYPPGIOCN CUTIICIIL US CHIC UCU OM CLO VLOCUIS CACHIIVNICS US MULCTILE VMINMVITTIES GUA NOY UNO) MNIOVGELIUTT, QUISTIles Ut Dveloppement conomique Canada. L'exploitation est autorise aux deux conditions suivantes:

(1) lappareil ne doit pas produire de brouillage, et ie ae wren Se AZ} VLUUNSALEUT US Ladle UUIL dlCeVLer LOUL VIUUIMAYe TdUlOCleCuniQqQUue SUN, THEME st le VIUUIaAYe Cot SUSCEVMUIDNE UCIT compromettre le fonctionnement. ice eae Tl 3 Aiea Lak Rian ole. Serta aad ll Adm debpaa nak eheaiin i iat ia a ux: law Saha ane Banana d'Industrie Canada ont t respectes. Ce produit rpond aux spcifications techniques applicables d'Industrie Canada. Cet quipement est conforme aux limites d' exposition aux rayonnements ISED tablies pour un environnement non CUTTUOKE, VEU CUUIVETHETIL UU CUS HIState St UNS aVEeU UNE UISIaHICe THT US 2 CIT CHI We FaUIGteUr St VUE CUTS. Electrical specification:

ECraniiancy Model Uplink Downlink Deis 3 Band B12, 17 698 ~ 716MHz 728 ~ 746MHz B13 776 ~ 787MHz 746 ~757MHz T10IN-US59 B5 824 ~ 849MHz 869 ~ 894MHz BS WW ~ TAOOMAZ 411U ~ ZIQOMAZ 1850 ~ 191ISMHAz 1930 ~ 1993Mhz B12, 17 698 ~ 716MHz 728 ~ 7A6MHz BS 824 ~ 849MHz 869 ~ 894MHz ZHWOB8LZ ~ OLLZ | ZHWOBZL ~ OLZL | v 994 | O9VI-NIOLL R75 2? 1850 ~ 1915MH7z 1930 ~ 1995MH7 pR7 ILNN ~ DR TOMS IAIN ~ DAONMLUS pe1i19197 17 e<LA-D | e-LA-AD wg Saag OF TS er Ne Max. Gain ma A AP 7 IPS 7) i>

Da, t; 9 Sep SfyuD Max. Output Power <

nN Ww a oO 3

<10dBm Electrical specification:

Manuat Gain Control S$20dB / 1dB step Attenuation Automatic Gain Control <15dBm elles PTS Mali CHAHISL IS SHULL UUW GULUITIALICGlYy WIletl Automatic Shut Down self-oscillation happens, input signals are too strong

| or reduction value of the gain reaches the limit 20dB. |

Noise Figure <6dB VSWR 1.8 Uroup Velay STOUS WR ee ee a NOMS PM UVSE SVLIOUEE EE

Phonetone Technology (Shenzhen) Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 3/21/2024 Phonetone Technology (Shenzhen) Co., Ltd. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought

(FCC ID: YYOT10IN-US59):

Name and company of U.S. agent:

Physical U.S. address of agent:

FRN of U.S. agent:

Email address of U.S. agent:

FCC US Agent, LLC 3722 Illinois Avenue, Saint Charles, IL, 60174, USA 0033402884 Support@FCCUSAgent.com FCC US Agent, LLC acknowledges their obligation to accept service of process on behalf of Phonetone Technology (Shenzhen) Co., Ltd. Phonetone Technology (Shenzhen) Co., Ltd. with the FRN 0020320701 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature Guangwei Zhang General Manager Phonetone Technology (Shenzhen) Co., Ltd. Signature Tim Payne Manager FCC US Agent, LLC 5 0 V

, U

) 7

) d

1 1 9

. 2 _ t n e g A _ S U

l e d o m

_ 8 4

Phonetone Technology (Shenzhen) Co., Ltd. March 25, 2024 Attestation for signal booster:

FCC ID:YYOT10IN-US59 Each Signal Booster certificated under FCC ID: YYOT10IN-US59 is manufactured and individually tested to ensure FCC compliance:

(1) Licensee consent for Fixed consumer booster has been obtained (consent be made available upon FCC/TCB request)

(2) NPS and other compliance/safeguard features have been implemented

(3) NPS and other compliance/safeguard features are defaulted to ON configuration (in operation)

(4) NPS and other compliance/safeguard features cannot be field reconfigured, disabled or removed

(5) This Consumer booster is not user programmable, does not need fine tuning or adjustment, does not require professional installation.

(6) Future software upgrade will not cause non-compliance. Yours sincerely, Guangwei Zhang

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products:

FCC ID YYOT10IN-US59 For the products listed above, we request permanent confidentiality for all applicable exhibits as there are:

Model name T10IN-US59 the Operational Description the Block Diagram the Schematics the Part List the Tune up Procedure The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-03-25 Name / Title: Guangwei Zhang / General Manager Company: Phonetone Technology (Shenzhen) Co., Ltd. Address: Room 404, Building 12, Qianlong Garden, Minzhi Street, Bao'an District, Shenzhen 518031, China Phone: +86-13510329652 Fax: +86-755-28199993 E-Mail: sales@phonetone-tech.com

Covered Equipment Identification Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(ii) of the Commissions Rules (47 C.F.R.) we attest as follows:

We, applicant Company Name: Phonetone Technology (Shenzhen) Co., Ltd. Address:

Room 404, Building 12, Qianlong Garden, Minzhi Street, Bao'an District, Shenzhen 518031, China Phone: +86-13510329652 certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-03-25 Name / Title: Guangwei Zhang / General Manager Company: Phonetone Technology (Shenzhen) Co., Ltd. Address: Room 404, Building 12, Qianlong Garden, Minzhi Street, Bao'an District, Shenzhen 518031, China Phone: +86-13510329652 Fax: +86-755-28199993 E-Mail: sales@phonetone-tech.com

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commissions Rules (47 C.F.R.) we attest as follows for the product listed below:

FCC ID YYOT10IN-US59 We, applicant Model name T10IN-US59 Company Name: Phonetone Technology (Shenzhen) Co., Ltd. Address:

Room 404, Building 12, Qianlong Garden, Minzhi Street, Bao'an District, Shenzhen 518031, China Phone: +86-13510329652 certify that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-03-25 Name / Title: Guangwei Zhang / General Manager Company: Phonetone Technology (Shenzhen) Co., Ltd. Address: Room 404, Building 12, Qianlong Garden, Minzhi Street, Bao'an District, Shenzhen 518031, China Phone: +86-13510329652 Fax: +86-755-28199993 E-Mail: sales@phonetone-tech.com

Room 404, Building 12, Qianlong Garden, Minzhi Street, Bao'an District, Shenzhen 518031, Phonetone Technology (Shenzhen) Co., Ltd. China Date: March 25, 2024 FCC ID: YYOT10IN-US59 Model Number: T10IN-US59 To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Phonetone Technology (Shenzhen) Co., Ltd. hereby declare that our product (Cell Phone Signal booster) Model Number: T10IN-US59 will disable WLAN function by software although BT modular DA14580 hardware support due to marketing purposes. End-user cannot use BT function in United States market. We will apply new FCC certification if open BT function due to marketing purposes. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely,

(Signed) Name/Title: Guangwei Zhang / General Manager Company: Phonetone Technology (Shenzhen) Co., Ltd. Address: Room 404, Building 12, Qianlong Garden, Minzhi Street, Bao'an District, Shenzhen 518031, China Tel: +86-13510329652 Fax: +86-755-28199993 E-Mail: sales@phonetone-tech.com