FCC ID: Y2P-AX1500 Dual band 11AX Gigabit Wireless Router

WiFi6 Wireless Router AX1500M Quick Star t Guide FAQ Q1. Login window does not appear, what should I do?

Check if your computer has a fixed IP address. Make sure your computer's IP is set to "Obtain an IP address automatically". You can try a different browser. Please confirm that your lines are connected correctly and the LED light is displayed normally; Please reboot your personal device and router and try again. Q2. How do I Reset my router to factory Settings?

When the router is powered on, press and hold the Reset button at the rear of the device for 5 seconds, then release the button. Please note that the router's current Settings will be cleared after reset, and it can be used normally after reset. You can also log in to the WEB management interface and select the Restore Factory Settings button. Q3. I forgot the password of the WEB management interface, what should I do?

Please reset the router to factory settings (Reset). The default account is:

admin and the password is: admin. Q4. I forgot the wireless connection passwor d, what should I do?

If you have not changed your wireless connection password, the default initial password is printed in the nameplate. If you have changed the wireless connection password, please connect the router in wired network mode, log in the WEB management interface, and check and change the password in the wireless network settings. Product Introduction LED Indicators Device Interface Quick Installation Quick Configuration Thank you for using the WiFi6 Wireless Router. This manual will introduce the operation, congu-

ration steps, FAQ and other relevant information related to this product. LED Layout 1. Connect the power adapter. According to status of LED, settings, perform the following operations:

To congure Internet access parameters or modify more judge whether the router is started normally. 2. Connect the WAN port to ONU or public network. 3. Connect the internet-based devices. Way Devices can connect to the router through WLAN, 1.The Internet access device connects to the WiFi6 router through WLAN or Ethernet cable (LAN port);

retne ,resworb beW eht nepO.2 192.168.11.1 eht ni Name: WiFi6 Wireless Router Model: AX1500M Physical Interface: WAN x 1 LAN x X3 Power port x 1 Temperature: Operating -10C-+45C Storage -40C-+70C Humidity: 5%-95%

Power Supply: DC 12V/1A Packing List:

Router X1, Power Adapter X1 Ethernet Cable X1, Quick Start Guide X1 Q5. I feel extremely slow speed of accessing the internet?

If the phone or laptops connect to the router through WiFi, please adjust the location of router according to the signal strength shown in device, and change the channel/bandwidth of WLAN. Q6. How to connect to the WLAN of router through WPS?

Please make sure that your devices support WPS function. Press 3s to open the 2.4G and 5G WiFi WPS of router. In 2 minutes, please turn on the WPS PBC function in your devices. Power System LAN Port The Status of LED Indicators LED Name Color Identification WPS 5G WiFi 2.4G WiFi Internet Status Power Green LAN Port Green 5G WiFi Green 2.4G WiFi Green Internet Green Light: The device is powered on normally Black: The device is powered off Light: LAN port is connected, but no communication Flash: Communicating Black: No connection Light: 5GHz WiFi on Black: 5GHz WiFi off Light: 2.4GHz WiFi on Black: 2.4GHz WiFi off Light: WAN port is connected, but no communication Flash: Communicating Black: No connection Light: WPS on WPS Green Flash: WPS connecting System Green Black: WPS funtion is disabled Light: The system is running normally Flash: The system is starting Warranty Card 7 User Information Name Address Tel Purchase Date Dealer Product Model Product SN Maintenance Record Date Maintenance Detail Maintenance Signature User Signature please check the SSID and WiFi KEY on the nameplate. sserdda bar, and press Enter. Log in the Web management Way Devices can connect to the LAN port of router interface. through wired ethernet.

;metsys si drowssap dnanimda si tnuocca tluafed ehT Button Name Operation Press 3s Description Turn on 2.4GHz and 5GHz WiFi WPS 4. Congure the WAN parameter, please follow the "quick Press 5s Restore the factory default configuration conguration" in chapter 5. Press Power on/off 3. To Modify the default WiF Settings. You can modify the SSID and password on the WLAN conguration page;

4. If the WAN port of the WiFi6 router is connected to the network port of the in-home broadband (optical modem), you need to set Internet access parameters in the WAN interface. For detail Internet parameters, please consult the broadband operator. Warranty Policy 8 Dear user:

Thanks for using the product. In order to better serve you, please read this instruction carefully after purchase and properly keep this warranty card. we carry out one year quality guarantee for this product. User instructions:

For the following several cases, customer service center will be appropriate to charge a certain cost of materials or mainte-

nance fees. Please check with the local customer service center for the specific charges. A. The warranty period of the product has expired. B. Malfunction caused by the user in the course of transporta-

tion, loading and unloading. C. Malfunction caused by disassembly, modification or modification of the product without authorization of the manufacturer. D. Malfunction caused by illegal operation that violate the method and attention described in the user manual. E. Malfunction caused by force majeure or other natural factors. F. If the warranty certificate is inconsistent with the product, or false record, you will not be responsible for the free service. FCC Warning 9 Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCCRules.Operation is subject to the following two conditions:

(1)This device may not cause hamful interference,and (2) this device must accept any interference received ,including interfe-

rerce that may cause undesired operation . Note: This equipment has been tested and foundto comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonableprotection agai-

nst harmful interference in a residential installation.This equipm-

ent generates uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions,ma-

ycause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful inte-

rference to racdio or television reception,which can be determined by turning the equipment off and on, the user is erncouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver -

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. CC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment . This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator &you body. 80g

) 1.Dimension after folding( )80*120mm. 2.Print colour()colour printing(). 3.Material() paper 4.Coating() 5.Binding process()Paper folding(). 6.Output lpi()200 lpi. 7.Tolerance()L()*W():1mm. 8.Raw materials and the corresponding post processing should meet requirements defined

(80g) in the Environmental Protection Technical Standards.

Phonex Broadband Corporation dba ReadyNet Add: 6952 S High Tech Drive, Suite B, Midvale, Utah 84047,United States Tel: 801-566-0100 Ex:104 Fax: 801-566-0880 Email: smetcalf@readynetsolutions.com Attestation Letter Date: 2023-02-09 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(5)(i)(ii) Filing FCC ID: Y2P-AX1500 Phonex Broadband Corporation dba ReadyNet (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Phonex Broadband Corporation dba ReadyNet (the applicant) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Signature Contact Person: Stephen Metcalf Title: Executive VP Company Name& Address: Phonex Broadband Corporation dba ReadyNet& P6952 S High Tech Drive, Suite B, Midvale, Utah 84047,United States CFR 47 2.911(d)(5)(i)(ii) Attestation Letter

Phonex Broadband Corporation dba ReadyNet Add: 6952 S High Tech Drive, Suite B, Midvale, Utah 84047,United States Tel: 801-566-0100 Ex:104 Fax: 801-566-0880 Email: smetcalf@readynetsolutions.com DECLARATION OF SIMILARITY Date: 2023-02-09 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam:

We, Phonex Broadband Corporation dba ReadyNet, hereby declare that the product: Dual band 11AX Gigabit Wireless Router, FCC ID: Y2P-AX1500. model:AX1500M is electrically identical with the model: AX1500MS which was tested by China Certification ICT Co., Ltd (Dongguan) with the same electromagnetic emissions and electromagnetic compatibility characteristics. A description of the differences between those models and that are declared similar are as follows:

They are the same product, The AX1500MS has a telephone port and USB port, while the AX1500M does not,and different model name, the rest are the same. Please contact me should there be need for any additional clarification or information. Best Regards, Signature:

Printed Name: Stephen Metcalf Title: Executive VP

Phonex Broadband Corporation dba ReadyNet Add: 6952 S High Tech Drive, Suite B, Midvale, Utah 84047,United States Tel: 801-566-0100 Ex:104 Fax: 801-566-0880 Email: smetcalf@readynetsolutions.com FCC Authorization Date: 2023-02-09 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We , Phonex Broadband Corporation dba ReadyNet, Hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Clients signature Printed Name: Stephen Metcalf Title: Executive VP QA-FR-170-B

Phonex Broadband Corporation dba ReadyNet Add: 6952 S High Tech Drive, Suite B, Midvale, Utah 84047,United States Tel: 801-566-0100 Ex:104 Fax: 801-566-0880 Email: smetcalf@readynetsolutions.com FCC Confidential Authorization Date: 2023-02-09 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: Y2P-AX1500 In accordance with Sections 0.457 and 0.459 of the Commissions Rules, (Phonex Broadband Corporation dba ReadyNet ) hereby requests long-term confidential treatment of information accompanying this application as outlined below:

Block Diagram Schematics Operation Description SOFTWARE SECURITY DECLARATION FOR U-NII DEVICES The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature:

Printed Name: Stephen Metcalf Title: Executive VP QA-FR-171-A

Phonex Broadband Corporation dba ReadyNet Add: 6952 S High Tech Drive, Suite B, Midvale, Utah 84047,United States Tel: 801-566-0100 Ex:104 Fax: 801-566-0880 Email: smetcalf@readynetsolutions.com Attestation Letter for Agent 2023-02-09 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911 (d)(7) Filing FCC ID: Y2P-AX1500 Phonex Broadband Corporation dba ReadyNet certifies that, as of the date of the filing of the application, Phonex Broadband Corporation dba ReadyNet is our designated U.S. agent for service of process for the above referenced FCC ID: Y2P-AX1500. Phonex Broadband Phonex Broadband Corporation dba ReadyNet agrees to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-

related proceeding involving the equipment. Phonex Broadband Corporation dba ReadyNet accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information:

Company name: Phonex Broadband Corporation dba ReadyNet Address: 6952 S High Tech Drive, Suite B, Midvale, Utah 84047,United States FRN: 0020365292 Contact person: Stephen Metcalf Tel: 801-566-0100 Ex:104 Email: smetcalf@readynetsolutions.com U.S. Agent Signature Sincerely, Applicant Name Phonex Broadband Corporation dba ReadyNet Applicant Printed Name Stephen Metcalf Applicant Signature

Phonex Broadband Corporation dba ReadyNet Add: 6952 S High Tech Drive, Suite B, Midvale, Utah 84047,United States Tel: 801-566-0100 Ex:104 Fax: 801-566-0880 Email: smetcalf@readynetsolutions.com Date: 2023-02-09 To:

FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: FCC ID:Y2P-AX1500 declaration of frequency bands restriction Declaration Dear Sir or Madam:

We, Phonex Broadband Corporation dba ReadyNet, hereby declare that our product Dual band 11AX Gigabit Wireless Router, Model Number: AX1500M, AX1500MS have the ability to work in 2.4G and 5G 4 frequency bands: 5150 MHz~5250 MHz,5250 MHz~5350MHz,5470 MHz~5725 MHz, 5725 MHz~5850 MHz. For the purpose of marketing, the frequency of the product sold in U.S. are programmed and locked to work only in 2.4G(2412-2462MHz) and 5150 MHz~5250 MHz, 5725 MHz~5850 MHz, The other frequency bands 5470 MHz~5725 MHz, 5250~5350 MHz are disabled by firmware in factory. The end user or any other parties cannot have the capability to activate the other frequency bands. We applied for testing only frequency bands: 2412-2462MHz,5150 MHz~5250 MHz,5725 MHz~5850 MHz MHz for the United States this time. Please contact me if you have any question. Signature:

Printed Name: Stephen Metcalf Title: Executive VP