FCC ID: 2ASIVPGD6LV15N Electronic lock with BLE

LATCH EDITION USER MANUAL Table of Contents 1.1 Product Features Product Overview - Outside 2.1 2.2 Product Overview - Inside 2.3 2.4 Understanding Your New Lock Reset Button 2.5 Rebooting Your Lock 2.6 Low Battery 2.7 Changing The Battery 3.1 Configuring Access 3.2 Programming Mode 3.3 Adding an Access Code 3.4 Deleting an Access Code 3.5 Checking an Access Code 3. Adding Secure Link Wi-Fi Hub 1 2 3 4 5 6 7 8 9 10 11 1 Locking / Unlocking using Physical Key 4.1 Locking / Unlocking with Codes 4.2 4.3 Locking / Unlocking using App 4.4 Assistant Control 4.5 Safe Mode Locking and Unlocking with Voice 5.1 Offline Access Code (OAC) 5.2 Sub Admin 6.1 Re-keying 7.1 Important Notes 8.1 Cleaning 9.1 Safety Precautions For additional support, visit http://LOCKLY.com/help or email help@Lockly.com TABLE OF CONTENTS 1.1 Product Features Patented Anti-Peep PIN Genie Keypad Digits are randomly displayed on the key pad ensuring access codes to be undetectable to intruders after repeated use. Numbers are randomly distributed across 4 buttons, with 3 numbers in each button. Users can press any button showing their number. Location of the numbers are always different every time someone uses the keypad, making it hard for prying eyes to guess the correct code. Multiple Access Codes & Monitoring Store up to 18 Access Codes for family, friends and guests, as well as monitor entry and exit records. Live Monitoring and Voice Control Through your smartphone, monitor door access from anywhere in the world and securely control who comes and goes. You can also control your LOCKLY Amazon Alexa or Google Assistant. smart lock using your voice with Complete Privacy The exterior displayed keypad can be locked and switched off can prevent others trying to input the passcode from the outside and entering the home the LOCKLY The owner Offline Access Code (OAC) The offline access code can allow owners to issue access codes, set the allowed access duration, all without LOCKLY ever connecting to the internet, so in case of power outage, you can still magically and remotely issue Access Codes without any connection to the web. Auto-Lock Users no longer have to worry about forgetting to lock the door. With Auto Lock enabled, LOCKLY will automatically auto-lock the door based on your customized timing set between 5-300 seconds. Backup Keys and 9V Battery Socket The door can be opened with physical backup keys. There is also a 9V battery connection socket for emergency power backup to access the key pad in case your smart lock runs out of battery. SECTION 1.1 1 2.1 Product Overview - Outside Reboot Button 2 Touchscreen Keypad Buttons Bluetooth icon Screen Lock Icon Low Battery Alert OK Button Bluetooth light Handle Key Hole Cover Key Hole 9V Battery Backup Socket SECTION 2.1 2.2 Product Overview - Inside Battery Compartment Screw Battery Compartment 4 x AA Alkaline Batteries(Included) Battery Compartment Cover Inside Handle Reset Button Program Button SECTION 2.2 3 2.3 Understanding Your New Lock After the installation of your new LOCKLY, understanding some key functions of operating your smart lock is important. The following guides will walk you through resetting a lock, adding Access Codes, deleting Access Codes, adding and deleting fingerprints and also how to configure your OAC (Offline Access Code). For any questions you can always visit https://LOCKLY.com/help for assistance. Dont forget that LOCKLY the app by visiting the link below. works best with our iOS and Android app. Please download Scan or visit LOCKLY.com/app 4 SECTION 2.3 2.4 Reset Button In order to restore the LOCKLY Code available. The Activation Code can be found on the Activation Code Card that came with your smart lock. to factory default settings, you must have your Activation After you have the Activation Code ready, push the reset button on the back panel of the LOCKLY to perform your reset. See below to see which Reset Process applies for you. Once the smart lock has been reset, all the data previously stored will be deleted. If Paired with App Press Reset Button for one (1) second or till you hear a short beep. Open the LOCKLY smart-

phone app to add your lock using the Activation Code. If Never Paired Press Reset Button for three (3) seconds Reset Button SECTION 2.4 5 2.5 Rebooting Your Lock NOTICE Reboot LOCKLY in case of dead battery or malfunction. No settings will be changed and all Access Codes will still be stored within LOCKLY. Press and release the reboot button when you want to reboot the lock. Your LOCKLY will beep once after reboot. Only reboot when necessary. To reboot, find the reboot button located on the bottom of the exterior side of LOCKLY lock. The reboot button is located in the middle of the two 9V battery backup sockets. You will need something small such as a paperclip, to press the reboot button. Insert the paper clip and press down firmly and let go. Your screen should restart and the lock should reboot automatically. Reboot Button 6 SECTION 2.5 2.6 Low Battery When the battery is in seriously low condition, LOCKLY will make continuous beeping sounds in addition to the flashing low battery icon on the touch screen. You should replace batteries immediately to avoid your smart lock from shutting down. When your smart lock low-battery warning alert finally dies, you will have 3 chances to unlock your smart lock either by a password, APP or fingerprint. If the unlock was successful, the low-

battery warning alert will be on for 1 minute. After which, the smart lock will go to dead-battery mode and will lock auto lock in 5 seconds and the screen will display a low-battery icon. Condition Indicator Solution Low Battery Battery Icon on the display keypad will light up to indicate low battery. Dead Battery When there is no display and sounds;

and screen is non-functional. Replace batteries immediately to avoid battery failure. LOCKLY can still operate up to 300 cycles in low battery condition. Replace batteries immediately. Supplied physical backup keys can be used to unlock the door. Alternatively, use a 9V battery as shown below to temporarily activate the lock. Your LOCKLY will automatically detect battery polarity. So hold your 9V battery lead in place against bottom of the LOCKLY to temporarily activate the screen to enter your Access Code. Be sure to hold the 9V battery against the contact points located at the bottom of the lock until you have successfully unlocked your door with your Access Code. Once unlocked, batteries should be replaced immediately.

9V Battery SECTION 2.6 7 2.7 Changing The Battery Under normal use, the LOCKLY battery will last up to a year. Please check battery levels regularly and change your batteries when the low battery notification is issued. For best practice, always use new batteries by a major brand. Open the battery compartment cover and insert Be sure to unscrew the screw located on the top of the cover first by unscrewing counter clockwise before sliding the cover up. four (4) new AA alkaline batteries as shown. 1 Screw 2 3 AA 1.5V X 4

-Make sure the batteries are oriented correctly by matching the orientation displayed.

-Replacing the batteries do not reset stored Access Codes.

-To see a list of recommended brands, please visit http://Lockly.com/battery NOTICE Whenever batteries are replaced, reconnecting the smart lock to your smartphone App is required. If you have not yet downloaded the app, visit: LOCKLY.com/app 8 8 SECTION 2.7 SECTION 2.8 3.1 Configuring Access We recommend pairing your lock to your smart phone to manage your access codes. Section 3.1 - 3.9 refers to locks not paired with a smart phone. Once paired with a smart phone, the Program button will be disabled. How to Use the Keypad There are a total of five (5) buttons on the keypad as shown in the example image to the left. The numbers in each button may differ than what is shown on your device than what is displayed here. To enter your required digit, just simply press the circle where your number is shown. You do not need to press the actual number as anywhere within the circle will suffice. The button on the bottom is the OK button. You will be pressing this button when you are done entering your Access Code. OK Button NOTICE The Default Access Code is 1 2 3 4 5 6 Your new LOCKLY Access Code can be any combination of 6 to 8 digits. Once a new Access Code is entered, the Default Access Code of 123456 would be deleted. A maximum of 16 sets of Access Codes can be stored for use at any given time. To add more than 16 sets of Access Codes, you must delete an existing Access Code before adding a new code. If you're not using the APP, you can store up to 18 sets of Access Code. SECTION 3.1 9 3.2 Entering Programming Mode To enter Programming Mode, remove the battery compartment cover on the interior side of the Program buttons. to expose the Reset and Simply press the Program button to enter programming mode. Note: Program button will be disabled once synced to a smart phone. Configure all settings via synced smart phone. Access Codes previously added by Programming mode will be cleared. Program Button To end Programming Mode, press the Program button anytime. Programming Mode will automatically exit if the keypad is inactive for more than thirty (30) seconds. Number Mode Add Access Code Delete Access Code View Access Code After entering Programming Mode, you should see the screen as displayed to the right on your LOCKLY keypad. Follow the following steps to add, delete, or check your Access Codes. 10 SECTION 3.2 3.3 Adding an Access Code While in Programming Mode, select 1AD to add an Access Code. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. After pressing 1AD press Pd to add an Access Code. Enter your new 6 - 8 digit Access Code and press when you are finished. You will then re-enter the code to confirm your new Access Code. Remember, just touch the digit you need within the circle around each 3 numbers. There is no need to touch the exact location of the number. For example, based on the example image to the left, if you need 1, you can touch the upper left button . For 6, you would touch the upper right button. SECTION 3.3 11 3.3 Adding an Access Code (Continued) If you have successfully entered your new Access Code twice, you will see the new code displayed here. In this example, we chose 654321. Press to Confirm or to cancel. To exit or cancel, you can always press or If the two (2) Access Codes you entered does not match, an error message will appear on the screen (As shown to the left). Press OK to return to the Programming Screen and try again. See Section 3.3 OK Button 12 SECTION 3.3 3.4 Deleting an Access Code While in Programming Mode, select 2DE to delete an Access Code. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. After pressing 2DE press Pd to delete an Access Code. Example Only Active Access Codes will then be displayed on the screen in sequence from left to right, top to bottom. In the example shown on the left, the Access Code displayed is 1 3 5 7 9 0 . Rotate through different Access Codes shown by touching any number on the screen. If you find the Access Code you want to delete, simply hold the OK button for 2 seconds. (Continue on next page) OK Button SECTION 3.4 13 3.4 Deleting an Access Code (Continued) Once you have selected the Access Code you want to delete, LOCKLY will ask you to confirm deletion by showing you the Access Code you are deleting, in this example,1 3 5 7 9 0. Press to delete, or to cancel. NOTE There are two incidents where your Access Code cannot be deleted. There are no Access Codes set. The factory default Access Code cannot be deleted. There is only one (1) Access Code saved in the smart lock. At least one code must be registered. Please add another Access Code before attempting to delete the existing code. No Access Codes Set Only one Active Access Code 14 SECTION 3.4 3.5 Checking the Access Codes While in Programming Mode, select 3CH to check registered Access Codes. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. Active Access Codes will then be displayed on the screen in sequence from left to right, top to bottom. In the example shown on the Access Code displayed is 1 3 5 7 9 0 . left, the Rotate through the different Access Codes by touching any number on the screen. To exit Check Access Code screen, simply press the OK button. OK Button If there are no Access Codes registered in your smart lock, Check Access Code mode will be invalid. The default Access Code will not be shown on the display keypad, and you will see the following screen shown to the left instead. SECTION 3.5 15 3. Adding Secure Link LOCKLY Secure Link adds live status monitoring and voice control capabilities to your LOCKLY Smart Lock. Secure Link can be purchased and added anytime. To set up the LOCKLY launch the LOCKLY App on your iOS or Android device. From the main menu drop down located on the upper left of the screen, select Add a New Device then select Secure Link Wi-Fi Hub. Follow the in-app instructions to set up your Secure Link. smart lock with Secure Link Wi-Fi Hub and Door Sensors, To activate voice commands, you will need Amazon Alexa or Google Assistant. Make sure you enable the LOCKLY Action for Google Assistant or the Amazon Alexa Skill before you can configure your voice to perform voice commands. Visit the link below to purchase:

https://LOCKLY.com/hub SECTION 3. 4.1 Locking/Unlocking with Access Codes LOCKLY Smart Lock can be unlocked using multiple ways - via your stored Access Code smartphone with Bluetooth, the physical key supplied with your lock, or voice with Secure Link Wi-Fi Hub installed) Slide your hand across the screen to activate the keypad. Enter your 6 to 8 digit Access Code followed by the OK button. Press OK anytime to reset if you entered the wrong digit. If the Access Code entered is correct, the door will unlock. If the Access Code entered is incorrect, LOCKLY will beep twice. OK Button Three consecutive wrong attempts will put LOCKLY in Safe Mode.

(See Section 4.5) Lock your LOCKLY by pressing the OK Button or by brushing your hand across the screen anytime when the door is closed. The smart lock will also auto-lock after unlocking based on your set auto-lock settings. PIN Genie Fixed Digit You may toggle between two types of keypad displays to enter your Access Code. The fixed digit version and the PIN Genie version (Recommended). Press and hold the OK Button for 3 seconds to toggle back and forth between the two keypads.

(Sample display shown only) Hold OK (3 sec) SECTION 4.1 4.2 Locking/Unlocking LOCKLY with App You must have the LOCKLY iOS or Android app installed in order to lock and unlock with smartphone and connect with voice assistants like Alexa or Google Assistant. Please download the app by visiting the link below or search LOCKLY from the correct app store. Scan or visit LOCKLY.com/app SECTION 4. 4. Locking/Unlocking with Physical Key Exterior View To unlock your lock using the physical key (included), open the key cover on the handle by turning the cover to reveal the keyhole. Insert your key and turn clockwise or counter clockwise to lock or unlock the door. SECTION 4. 4. Locking and Unlocking with Voice Assistants Once your LOCKLY Smart Lock and Secure Link Wi-Fi Hub has been installed and configured correctly, make sure you enable the LOCKLY Action for Google Assistant or the Amazon Alexa Skill before you can configure your voice to perform voice commands. You can ask your questions such as door status or request for your door to be locked or unlocked

- "Hey Google, unlock my Back Door"*

- "Hey Google, is my Back Door locked?"

- "Hey Google, lock my Back Door"

- "Hey Google, is my Back Door unlocked?"

- Alexa, unlock my Front Door.*

- Alexa, is my Front Door locked

- Hi Alexa, lock my Front Door.

- Alexa, is my Front Door unlocked

*Unlock requests will require additional voice security codes. You may configure it in the settings page. Included in Pro and sold separately for other models. Google, Android and Google Play are trademarks of Google LLC. 2 SECTION 4. 4. Safe Mode - Overview LOCKLY will enter Safe Mode when three (3) consecutive wrong Access Codes are entered within 5 minutes. When in Safe Mode, the lock status icon will start to flash. To disable Safe Mode, you must unlock the door using the correct fingerprint or enter the correct Access Code twice in a row. Activate the keypad by pressing and holding for 3 seconds. Once the screen is activated, enter the correct Access Code carefully twice, pressing after every time. If you enter the wrong code, the keypad will then be disabled for 10 minutes. Countdown Prompt

(Displayed in Minutes) Will start with 10 and countdown until 0. Example A Example B You will see a 10 on the screen, notifying the number of minutes that the keypad is disabled for. After 10 minutes, you may attempt to enter the correct Access Code to unlock the door. After the second incorrect attempt to unlock the lock with the wrong Access Code, LOCKLY will disable the keypad for 20 minutes, displaying a 20 on the screen. After the third wrong attempt to unlock the door with the correct Access Code, the screen will be disabled for 30 minutes. (Example A and Example B above). Note: In order to conserve power, the countdown prompt will only be displayed for 3 seconds. You can reactivate the screen by sliding your hand across the screen. SECTION 4. 2 4. Disabling Safe Mode There are

( ) ways to disable Safe Mode. Option 1 - Entering Correct Access Code Activate the keypad by pressing and holding for 3 seconds. Enter the correct Access Code twice (2) when the keypad is available, pressing every time the Access Code is entered. after Option 2 - LOCKLY Bluetooth App Use the app that is synced to your LOCKLY to disable Safe Mode by unlocking the door. If you have not downloaded the app to use with your smart lock, you wont be able to use this option to disable Safe Mode. Option 3 - Physical Key There is a pair of keys included with your new lock. You may use the keys to manually unlock the door. To learn how to use your physical keys, see Section 4. While in Safe Mode, the keypad will not be lit up when you are using your Physical Key. SECTION 4. 5.1 Offline Access Code (OAC) The Offline Access Code (OAC) is a unique feature of our smart lock. It allows you to grant access to guests remotely without guests needing to download the app. To use the OAC feature, make sure you download the LOCKLY app for iOS or Android first, and sync your smart lock to your mobile device. OAC can only be issued by the administrative owner of the lock. From there, you can then issue an Offline Access Code within the app. Go to Access and choose Add a New User, then select Offline Access Code (OAC) and follow on screen instructions to generate your Offline Access Code. Understanding Offline Access Code (OAC) OAC are issued to the guest by asking them to enter 4-12 digit number after a double - click on the . Your LOCKLY randomly generates the Offline Access Code which can be shared to your guests together with the instructions generated using the LOCKLY app. After a double-click on the , touchscreen will display numbers on Fixed Digit mode, then guest can enter the Offline Access Code. SECTION 5.1 5.2 Sub-Admin Access Sub-Admin Access can be created to grant access for others to be able to control your lock and grant access to others via Bluetooth when within range of your LOCKLY App then Add A New User. You can select the Validity Period and User Permissions of the sub-admin. Sub Admins will not be able to access the lock remotely but Sub Admin will be able to grant limited access codes to users when within Bluetooth range. Once Sub Admin control is setup, you as the Admin will no longer be able to issue Offline Access Code

(OAC) The Sub-Admin access is ideal for long term property leasing and Airbnb tenants. SECTION 5.2 6.1 Re-keying LOCKLY purchased DIY re-keying kit available in the market. smart lock comes with a 6-pin cylinder which can be replaced with regularly If you are not familiar with this process, please contact a professional locksmith. For more information, visit : http://support.LOCKLY.com/faq/rekeying/

SECTION 5.2 7.1 Important Notes Auto Lock Feature Your lock can be programmed to auto-lock between 5-300 seconds after the door opening. You can select the timing through the LOCKLY App. If auto-lock is not activated and door is still open, the touchscreen will remain lighted, simply press the on the keypad to lock. One-Touch Locking You can always manually do a quick lock by touching anywhere on the touchscreen. LOCKLY smart lock is shipped with this feature already activated. You may deactivate this feature through the LOCKLY APP. When your LOCKLY is out of power, you can temporarily activate the keypad by using a 9V battery against the bottom of the exterior side of the smart lock. Please see Section 2.6 for more info. Even though you have your fingerprints registered and Access Codes stored, its always best practice to carry your physical keys with you at all times in case for any reason your lock falls into Safe Mode. You may find an Activation Code Card with an Activation Code included in your package. It is very crucial that you do not lose this card. Please store this card safely as you will need the default Activation Code on that card to master reset your lock in case, for any reason, you have lost the phone paired to LOCKLY and also forgot your Access Code. Please visit http://LOCKLY.com/help for troubleshooting and the most frequently asked questions and answers. 9V Backup Access Physical Keys Activation Code Troubleshooting SECTION 7.1 8.1 Cleaning Making sure your LOCKLY is clean is best practice to ensure optimal product use. Follow the DOs and DONTs below. DO DONT Rinse the touchscreen with warm water prior to cleaning. Dont use abrasives, high alkaline cleaners, or gasoline to clean your lock. Use the application of soap with a damp, lukewarm cloth. Dont apply cleaning detergent directly in sunlight or at high temperatures. Air dry or wipe dry with a soft microfi-

ber cloth to avoid scratches. Dont leave cleaning detergent on the display keypad for long periods of time - wash immediately. Dont use scrapers, squeegees, or razors. SECTION 8.1 9.1 Safety Precautions Please read all instructions carefully. Remind all LOCKLY users of the safety precautions. Read the following instructions for your own safety Do not attempt to disassemble the smart lock by yourself. It can cause product damage, void warranty, and cause injuries. Do not use any inappropriate tools that can cause damages or malfunction to your lock. Always make sure your door is securely closed and locked when you leave your house to prevent unwanted entry. Please keep your Access Codes safe. Restrict access to the back panel of your smart lock and check your settings regularly to ensure Access Codes have not been changed without your knowledge. Always dispose of used batteries according to your local laws. DO NOT BURN. Unauthorized changes and modifications may void your product warranty. If you have questions or any problems while using your LOCKLY Smart Lock, contact our customer service department at help@LOCKLY.com or visit http://LOCKLY.com/help for technical assistance. SECTION 9.1 FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Radiation Exposure Statement The Secure Link Wi-Fi Hub complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with minimum distance 20cm between the radiator & your body. IC WARNING This device contains licence-exempt transmitter(s) that comply with Innovation,Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two condi-

tions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

1. Lappareil ne doit pas produire de brouillage;

2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. IC Radiation Exposure Statement This equipment meets the exemption from the routine evaluation limits in section 2.5 of RSS-102. It should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. Cet quipement est conforme l'exemption des limites d'valuation habituelle de la section 2.5 de la norme RSS-102. Il doit tre install et utilis une distance minimale de 20 cm entre le radiateur et toute partie de votre corps. WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer. For more information go to www.P65Wamings.ca.gov. Were here to help!

help@LOCKLY.com https://LOCKLY.com/help UM6S20201224 LOCKLY All Rights Reserved LOCKLY Secure LOCKLY Secure Plus LOCKLY Secure Pro LOCKLY Secure Lux LOCKLY Lux Compact LOCKLY Model 6S LOCKLY Model 7S LOCKLY DUO LOCKLY Secure Link LOCKLY Vision LOCKLY Secure, Secure Plus, Secure Pro, Secure Lux, DUO, Lux Compact, Model 6S, Model 7S and LOCKLY Vision are keyless smartlocks equipped with the patent-

ed PIN Genie, which is a peep proof and hidden camera proof algorithm soft-

ware. LOCKLY makes your life easier and safer. For digital versions and instructional videos, please visit the following link:

http://LOCKLY.com/help To ensure you have access to the most updated and newly added features of your LOCKLY smart lock, please visit: www.LOCKLY.com/newfeatures

Reference No.: WTX21X09096003W-1 Page 1 of 12 ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the devices expected lifetime. Proposed Label Location on EUT FCC ID Label Location Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn

Reference No.: WTX21X05049634W-1 Page 1 of 15 ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the devices expected lifetime. Proposed Label Location on EUT FCC ID Label Location Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn

PIN GENIE, INC. DBA LOCKLY 676 Transfer Rd., St, Paul, MN 55114, United States Date: 2021-10-14 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2ASIVPGD6LV15N Confidentiality Request To whom it may concern, Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of the information accompanying this application as outlined below:

& Block Diagram CO Tune-Up Information

&] Operational Description C1 Security Information

& Schematics C1] Software Defined Radio (SDR) 0 Parts List Information The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, PIN GENIE, INC. DBA LOCKLY

PIN GENIE, INC. DBA LOCKLY 676 Transfer Rd., St. Paul, MN 55114, United States FCC Class II Permissive Change Application Letter FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 To Whom It May Concern:

This is to request a Class II permissive change, the following the original equipment:

Product name :

Electronic lock with BLE FCC ID:

2ASIVPGD6LV15N Date of Grant:

06/11/2021 Model No.:

PGD6LV15N Change Contents: update the PCB as below:

Location Old PCB of FCC ID: 2ASIVPGD6LV15N New PCB of FCC ID: 2ASIVPGD6LV15N LCD board Replace the LCD display control IC; The new chip component is pin-for-pin compatible; The new chip has the same basic function as the old chip; No change in radio parameters has occurred. Corresponding drive circuit and optimize PCB layout to adapt to the new display control IC PCB board solder mask color changed from green to black;

Modifications that do not change the fundamental RF characteristics and that do not degrade the unwanted emissions of the certified product, please refer to test report for more details;

Modifications that do not change physical characteristics significantly. We attach new photographs to identify the modified product. Sincerely, PIN GENIE, INC. DBA LOCKLY

Cindy zhou/COO

PIN GENIE, INC. DBA LOCKLY

(FCC ID: 2ASIVPGD6LV15N) POWER OF ATTORNEY DATE: 2021-10-14 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern:

We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, PIN GENIE, INC. DBA LOCKLY are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, PIN GENIE, INC. DBA LOCKLY

(Cindy zhou)

nan, PIN GENIE, INC. DBA LOCKLY 555 California Street, Suite 4925, San Francisco, California, United States Date: 2021-06-08 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2ASIVPGD6LV15N Confidentiality Request To whom it may concern, Pursuant to Sections 0.457 and 0.459 of the Commission's Rules, we hereby request confidential treatment of the information accompanying this application as outlined below:

& Block Diagram O Tune-Up Information

& Operational Description O Security Information

& Schematics O Software Defined Radio (SDR) O Parts List Information The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, PIN GENIE, INC. DBA LOCKLY