FCC ID: 2ASIVPGD699 Lockly Vision

LOCKLY VISION LATCH EDITION USER MANUAL PGD698LL Table of Contents Section 1 - Product Highlights 1.1 Product Features Section 2 - Product Overview 2.1 Product Overview - Exterior 2.2 Product Overview - Interior 2.3 Understanding Your New Lock 2.4 Rebooting Your Lock 2.5 Low Battery 2.6 Changing The Battery 1 2 3 4 5 6 7 4.5 Locking/Unlocking with app 4.6 Unlock with QR Code 4.7 Locking/Unlocking with Door Handle 4.8 Safe Mode - Overview 4.9 Childproof Switch 4.10 Rain Mode 4.11 Shine Mode 4.12 Welcome Mode Section 5 - Video Doorbell 5.1 Video Doorbell Section 3 - Using Your Smart Lock Section 6 - Advanced Features 3.1 Configuring Access 3.2 Entering Programming Mode 3.3 Pairing to a New Mobile Device 3.4 Adding an Access Code 3.5 Checking/Deleting an Access Code 3.6 Adding a Fingerprint 3.7 Adding/Deleting Fingerprints 3.8 Fingerprint Scanning Directions 3.9 Fingerprint Scanning Tips &

Troubleshoot 3.10 Adding an RFID card 3.11 Checking/Deleting an RFID Card 8 9 10 11 11 12 13 14 15 15 17 6.1 Offline Access Code (OAC) 6.2 Sub Admin Access Section 7 - Re-keying 7.1 Re-keying Section 8 - Important Notes 8.1 Important Notes Section 9 - Maintenance and Cleaning Section 4 - Locking and Unlocking 9.1 Cleaning 9.2 Calibrating the Lock 4.1 Unlocking with Access Codes 4.2 Locking/Unlocking with Fingerprints 4.3 Unlocking with RFID 4.4 Locking/Unlocking with Physical Key 17 19 20 20 Section 10 - Safety Precautions 10.1 Safety Precautions 21 22 22 23 25 26 27 27 28 32 33 33 34 35 35 36 For additional support, visit http:// Lockly.com/help or email help@Lockly.com TABLE OF CONTENTS 1.1 Product Features Video Monitoring and Recording See who's at your front door with Live View camera streaming, real-time high-resolution video from your smartphone. Video recordings are stored locally with no monthly fees. Patented Hack-Proof PIN Genie Keypad Digits are randomly displayed on the keypad ensuring access codes to be undetectable to intruders after repeated use. Numbers are randomly distributed across 4 buttons, with 3 numbers in each button. Users can press any button showing their number. Location of the numbers are always different everytime someone uses the keypad, making it hard for prying eyes to guess the correct code. Multiple Access Codes & Monitoring Store up to 52 Access Codes for family, friends and guests, as well as monitor entry and exit records. Advanced 3D Fingerprint Recognition Biometric Fingerprint Recognition protocol allows up to 99 registered fingerprints to be used and accepts only actual fingerprints - preventing lifted prints from being used. Live Monitoring Through your smartphone, monitor door access from anywhere in the world and securely control who comes and goes with the Vision Connect Hub.

(PGH123X-Vision Connect Hub). RFID Card Access Supports up of 999 MIFARE RFID cards for quick and easy access. Offline Access Code (OAC) The offline access code can allow owners to issue access codes, set the allowed access duration, all without Locky Vision ever connecting to the internet, so in case of power outage, you can still magically and remotely issue Access Codes without any connection to the web. Auto-Lock Users no longer have to worry about forgetting to lock the door. With Auto Lock enabled, Locky Vision will automatically auto-lock the door based on your customized timing set between 5-300 seconds. Backup Keys and 9V Battery Socket The door can be opened with physical backup keys. There is also a 9V battery connection socket for emergency power backup to access the key pad in case your smart lock runs out of battery. SECTION 1.1 1 2.1 Product Overview - Exterior Video Camera Microphone RFID Card Reader Keypad Buttons Touchscreen Welcome/Safe Mode Battery Indicator OK Button Bluetooth Icon Fingerprint Sensor Doorbell Button Video Doorbell Light Indicator Speaker Exterior Handle Key Hole Key Hole Cover 9V Battery Backup Socket Reboot 2 SECTION 2.1 2.2 Product Overview - Interior Battery Cover Screw Battery Cover Rechargeable Li-ion Battery Reset Button SECTION 2.2 Program Button Low Battery Indicator/Door Lock Button Childproof Switch Interior Handle 3 2.3 Understanding Your New Lock After the installation of your new Lockly Vision, understanding some key functions of operating your smart lock is important. The next sections will walk you through configuring Access Codes, adding fingerprints, RFID cards, video doorbell recording, rebooting, setting advanced features on the app, configuring Offline Access Code (OAC) and other features of your lock. For any questions you can always visit http://Lockly.com/help for assistance. Dont forget that in order for Lockly Vision, to work with full features, it is required to pair it with the Lockly app available for both iOS and Android smart devices. Please download the app by visiting the link below. Scan or visit Lockly.com/app 4 SECTION 2.3 2.4 Rebooting Your Lock NOTICE Reboot Lockly Vision in case of dead battery or malfunction. No settings will be changed and all Access Codes will still be stored within Lockly Vision. Press and release the reboot button when you want to reboot the lock. Your Lockly Vision will beep once after reboot. Only reboot when necessary. To reboot, find the reboot button located on the bottom of the exterior side of Lockly Vision lock. The reboot button is located in the middle of the two 9V battery backup sockets. You will need something small such as a paperclip, to press the reboot button. Insert the paperclip and press down firmly and let go. Your screen should restart and the lock should reboot automatically. Reboot Button SECTION 2.4 5 2.5 Low Battery When the battery is in seriously low condition, Lockly Vision will make continuous beeping sounds in addition to the flashing low battery icon on the touch screen. You should replace batteries immediately to avoid your smart lock from shutting down. When your smart lock low-battery warning alert finally dies, you will have 3 chances to unlock your smart lock either by a password, app or fingerprint. If the unlock was successful, the low-battery warning alert will be on for 1 minute. After which, the smart lock will go to dead-battery mode and will lock auto lock in 5 seconds and the screen will display a low-battery icon . Condition Indicator Solution Low Battery Battery Icon on the display keypad will light up to indicate low battery . At the same time, Lockly logo on the interior panel will flash red to reminder users that battery is low. Dead Battery When there is no display and sounds; and screen is non -functional. Replace batteries immediately to avoid battery failure. Lockly Vision can still operate up to 300 cycles in low battery condition. Replace batteries immediately. Supplied physical backup keys can be used to unlock the door. Alternatively, use a 9V battery as shown below to temporarily activate the lock. Your Lockly Vision will automatically detect battery polarity. So hold your 9V battery lead in place against bottom of the Lockly Vision to tempo-

rarily activate the screen to enter your Access Code. Be sure to hold the 9V battery against the contact points located at the bottom of the lock until you have successfully unlocked your door with your Access Code. Once unlocked, batteries should be replaced immediately.

9V Battery 6 SECTION 2.5 2.6 Changing The Battery Under normal use, the Lockly Vision battery will last up to a year. Please check battery levels regularly and change your batteries when the low battery notification is issued. For best practice, always use new batteries by a major brand. Open the battery compartment cover and insert Li-ion Battery as shown. Be sure to unscrew the screw located on the top of the cover first by unscrew-

ing counter clockwise before sliding the cover up. 1 Screw 2 3 Li-ion Battery

- Make sure the batteries are oriented correctly by matching the orientation displayed.

- Replacing the batteries do not reset stored Access Codes. NOTICE Whenever batteries are replaced, reconnect-

ing the smart lock to your smartphone app is required. If you have not yet downloaded the app, visit:

Lockly.com/app SECTION 2.6 7 3.1 Configuring Access Pair your lock to your smart phone to manage your access codes. Follow the on screen instructions to complete the setup. How to Use the Keypad There are a total of five (5) buttons on the keypad as shown in the example image to the left. The numbers in each button may differ than what is shown on your device than what is displayed here. To enter your required digit, just simply press the circle where your number is shown. You do not need to press the actual number as anywhere within the circle will suffice. The button on the bottom is the OK button. You will be pressing this button when you are done entering your Access Code. OK Button NOTICE The Default Access Code is 1 2 3 4 5 6 Your new Lockly Vision Access Code can be any combination of 6 to 8 digits. Once a new Access Code is entered, the Default Access Code of 123456 would be deleted. A maximum of 52 sets of Access Codes can be stored for use at any given time. To add more than 52 Access Codes, you must delete an existing Access Code before adding a new code. There are different types of Access Codes that can be generated using the Lockly app. Each type of access code have different levels of permission you can select for your guests, tenants, deliveries, helpers, etc., Get the latest updates on access codes, visit: support.lockly.com/faq/accesscodes/

8 SECTION 3.1 3.2 Entering Programming Mode To enter Programming Mode, remove the battery compartment cover on the interior side of the Lockly Vision to expose the Program buttons. Simply press the Program button to enter programming mode. Note: Program button will be disabled once synced to a smart phone. Configure all settings via synced smart phone. Program Button To end Programming Mode, press the Program button anytime. Programming Mode will automatically exit if the keypad is inactive for more than thirty (30) seconds. You will need to scan the ACTIVATION CODE* that comes with the lock to pair your lock with the app. See Step 10-14 of the Installation Guide to pair Vision on the new Lockly app account.

*The activation code card is attached to the welcome card inside the package. Store it for future use. Once you have registered your lock on the Lockly app, you have the option to save it on the PIN Genie Vault. To access details for future use, check your account information and go to PIN Genie Vault. SECTION 3.2 9 3.3 Pairing to a New Mobile Device PAIR WITH HUB In the programming mode, select "PA" to pair the gateway. If you're not in programming mode, see Section 3.2 to enter programming. After pressing "PA", the PA icon will flash, and you will hear a tone prompt indicating that you are in pairing mode. You need to press the Vision Connect Hub reset button three times within 20 seconds. If the pairing is successful, you will hear a long "beep". If the pairing fails, you will hear three "beeps". You need to re-enter the programming mode, and then enter the hub pairing mode "PA" to pair again the device. PAIR TO APP To pair your smart lock to a new mobile phone, download the Lockly app on your new mobile phone then use the same account to login to your Lockly app on the new mobile device. If you're pairing your Lockly Vision to a new Lockly app account, follow the steps below 1. On the old Lockly app account, go to Settings > Reset and pairing > Perform Factory Reset. 2. Download, register and log in to the new Lockly app account. 3. You will need to scan the ACTIVATION CODE* that comes with the lock to setup to a new account. 2 Activation Card SAVE LOCK SERIAL PGDxxxxxxxxxx ACTIVATION CODE xxxxxxxx SCAN & SAVE 3 2 2 1 2 2 0 2 C C A Need help? Email: help@Lockly.com | Support: +1(669) 500-8835 N e e d H e l p

Activation Card SAVE LOCK SERIAL PGDxxxxxxxxxx ACTIVATION CODE xxxxxxxx SCAN & SAVE 3 2 2 1 2 2 0 2 C C A Need help? Email: help@Lockly.com | Support: +1(669) 500-8835 A c t i v a P A L t i A C G C D O C C o K T e i s h i s l e p o u N e e d h e l p

E m a i l

l o s n e i c i a n y c o k u

, i t

. q r u d a h e l p r l o i d Y c e k n e h s o t a e u o s c i f t i f w n y i l l a u y o n r u a e T I x V A a x r x T n K d x S I x x E T x I x O x N x x m R V C x i x s I A A a s x L r x C x O i x n x T I d D E g

O

L o c k l y

. c o m

S C N S C A N o n t C a A c R

t V i s i t s u p p o r t a t e o n r c a c w e s t i n e s n e m v s e d a a r s i t r t o a t i d s a r y

. h i t p o l n f o e c c a s k o p e n t

. d l u S p A p V o E u D s

. r t

1

6 6 9

) 5 0 0

8 8 3 5 S A V E 2 0 2 2 1 2 2 3 C C A d u D e a c t p o o t h e y n a r e o o t t s u e r t 1 3 w w w

. l o c k l y

. c o m

h e l p I C C P G D 8 2 9 2 0 2 2 1 2 2 3 Old app account Scan to new Lockly app account DO NOT INSERT ANY PINS TO RESET HOLES OF LOCKLY VISION

/ VISION DUO OR VISION CONNECT without consulting our support team. If you cannot remove your Lockly Vision from the old account, contact our customer service department at help@Lockly.com or visit http://Lockly.com/help for technical assistance. IMPORTANT 10 SECTION 3.3 3.4 Adding an Access Code Enter the App Access Management settings then tap "Add New User". Select the the type of user you wish to add access, Trusted User, Guests, One-Time Access. For example, select Trusted User, enter the users name and set the Access Code. Re-enter the access code, then tap Confirm to successfully add the new access code. An access code is a combi-

nation of 6 to 8 digits. The Administrator can set up to 52 sets of access codes and these can only be added through the app. Default access code (123456) be-comes invalid once an administrator access code is setup. 3.5 Checking/Deleting an Access Code Access codes can only be deleted through the App. Enter the App Access Management and you can view all the issued access code users. Tap the access code user you wish to be deleted. Check access code and user name is correct, then tap "Delete User" to complete deleting the user access code. The default access code 123456 can not be deleted until a new access code has been setup. Immediately setup a new access code and delete the default access code for your security. SECTION 3.4 ~ 3.5 11 3.6 Adding a Fingerprint We are using an advanced biometric sensor, providing the most secure fingerprint authentication. For security reasons, Lockly Vision will only accept fingerprint patterns that consist of cross intersection points. Patterns with no cross intersection points will not be acceptable. Please check your fingers before registration to make sure the finger you want to register will be acceptable by our system. Otherwise, use an alternative finger to ensure successful registration. The following examples show which types of fingerprint patterns will be acceptable. It is highly recommended to enroll at least one finger from each hand in case the hand you are using is unavailable, such as, in instances like if you are holding items in that hand or have sustained an injury. Fingerprint Pattern with Cross Intersection Lines Concentric or Parallel Pattern with no Cross Intersection Lines Fingerprint with Scars or Worn Out Ridges OK Not OK Not OK Your Lockly Vision can register up to ninety-nine (99) fingerprints. Please read the following sections if you want to add or delete fingerprints. We recommend using your app to add fingerprints, however, the following section can show you without using the app. 12 SECTION 3.6 3.7 Adding/Deleting Fingerprints Fingerprints can only be added or deleted through the app. On the App Access Manage-

ment, select Fingerprint, then tap "Add New Fingerprint". Scan your finger by lightly placing your desig-

nated finger on the sensor until you hear a beep. Lift your finger and repeat the process until the digit 6 shown on the screen becomes 1. If you have successfully scanned and registered your fingerprint, you will hear a beep and PASS will be displayed on the keypad. Press to exit. If you did not successfully register your fingerprint, FAIL will show on the keypad. If FAIL is displayed, return to the previous app menu and rescan your finger. For fingerprint scanning directions, please refer to Section 3.8. IMPORTANT Please make sure your fingers are clean from dirt and oils before scanning your fingerprint. Make sure the sensor is also clean by taking a soft cloth and wiping the surface. To delete fingerprint access, on the App Access Management, select Finger-

print. All registered fingerprint profiles will be shown. Scroll down, select the tap the profile you wish to delete. Check and then tap "Delete User" to confirm and complete deleting the fingerprint. SECTION 3.7 13 3.8 Fingerprint Scanning Directions The fingerprint sensor equipped in your smart lock is loaded with powerful fingerprint algorithms to extract quality features from fingers, even in poor conditions. Placing your finger on the sensor correctly helps consistency in fingerprint recognition. The following directions and tips will guide you on how to scan an optimal fingerprint image. Position your finger on the center of the sensor Sensor Core Correct Incorrect Top View OK Side View OK 14 SECTION 3.8 3.9 Fingerprint Scanning Tips & Troubleshoot Tips for Fingerprint Enrollment and Recognition Place your finger to completely cover the sensor with maximum contact surface. Position the center of your finger (core) to the center of the sensor. Hold your finger still for more than a second until you hear a beep. Scan a finger that is clean and free from dirt. Children ages 12 and under are not recommended to use fingerprint access due to the constant changes of their fingers during growth. Elderly with fading fingerprints may have difficulty in recognition. If your finger has a cut, scar, or cracked skin due to dryness, try another finger. If your fingerprint reader is having issues recognizing your fingerprint to unlock due to varying physical and weather conditions such as moist, sweaty, cold or dry; please add an extra scanning of the finger in such condition. This will improve the fingerprint readers speed and recognition. Troubleshooting Fingerprints In case of poor fingerprint conditions If wet - wipe excess moisture from finger before scanning If dirty - wipe stains and dirt off from finger before scanning Make sure the sensor is clean from dirt or smudges - wipe sensor with soft cloth regularly For more troubleshooting help, visit http://Lockly.com/help 3.10 Adding an RFID card RFID cards can only be added through the app, and a maximum of 999 RFID cards can be added. On the App Access Management, select RFID card then tap "Add New RFID Card"

SECTION 3.9 ~ 3.10 15 3.10 Adding an RFID card (Continued) The Lockly Vision keypad will lit up and show the number sequence of the RFIDs to be added. Place the card into RFID card reading area. After the RFID card is successfully added, the keyboard will display PASS, and then give a long "beep". The display will automatically exit and illuminate with the PIN Genie screen. If the RFID card is not successfully added, the keyboard will display FAIL, and then the screen will close with "beep" twice. If FAIL is displayed, return to the previous application menu and try Add New RFID Card. NOTE: When adding an RFID card, make sure the screen lit up and the card is close to the RFID reading area, within 1cm. If an RFID card is damaged or the card has not been encrypted properly, it cannot be added and used normally. Place the RFID card to the screen where the RFID card sensor is embedded. PASS will show on the keypad once card is registered successfully. 16 SECTION 3.10 3.11 Checking/Deleting an RFID Card The RFID card can only be delet-

ed/checked through the app. On the App Access Management, select RFID Card. All registered RFID cards will be shown. Scroll down, select the tap the profile you wish to delete. Check and then tap "Delete User"

to confirm and complete deleting the RFID card. 4.1 Unlocking with Access Codes Lockly Vision Smart Lock can be unlocked using multiple ways - via your stored Access Code, registered fingerprint, smartphone with Bluetooth, the physical key supplied with your lock, or RFID card. OK Button SECTION 3.11 ~ 4.1 17 4.1 Unlocking with Access Codes (Continued) Slide your hand across the screen to activate the keypad. Enter your 6 to 8 digit Access Code followed by the OK button. Press OK anytime to reset if you entered the wrong digit. If the Access Code entered is correct, the door will unlock. If the Access Code entered is incorrect, Lockly Vision will beep twice. Ten consecutive wrong attempts will put Lockly Vision in Safe Mode. (See Section 4.8) Lock your Lockly Vision by pressing the OK Button or by brushing your hand across the screen anytime when the door is closed. The smart lock will also auto-lock after unlocking based on your set auto-lock settings. You may toggle between two types of keypad displays to enter your Access Code. The fixed digit version and the PIN Genie version (Recommended). Press and hold the OK Button for 3 seconds to toggle back and forth between the two keypads.

(Sample display shown only) PIN Genie Fixed Digit Hold OK (3 sec) 18 SECTION 4.1 4.2 Locking/Unlocking with Fingerprints Unlocking Place a registered finger to the fingerprint scanner located on the exterior side of the lock to the right. To register a fingerprint, please see Section 3.7. If your fingerprint is registered and acknowledged, you will hear a beep sound and a Green LED will light up on the fingerprint scanner. You can then push down the handle and open the door. If you see a Red LED, it means your fingerprint is not recog-

nized. Try again or use another registered fingerprint. For best fingerprint scanning practices, see Section 3.8. Locking To lock your smart lock, swipe your hand across touchscreen. The lock should close (lock). If the touchscreen is ON, touch , the lock should lock as well. SECTION 4.2 19 4.3 Unlocking with RFID Push down the handle and open the door after it chimed. Place your RFID card closer to the panel. 4.4 Locking/Unlocking with Physical Key Exterior View To unlock your lock using the physical key (included), open the key cover on the handle by turning the cover to reveal the keyhole. Insert your key and turn clockwise or counter clockwise to lock or unlock the door. 20 SECTION 4.3 ~ 4.4 4.5 Locking/Unlocking with app You must have the Lockly iOS or Android app installed in order to lock and unlock with smartphone. Please download the app by visiting the link below or search Lockly from the correct app store. Scan or visit Lockly.com/app SECTION 4.5 21 4.6 Unlock with QR Code If you have multiple Locky Vision door locks, you can use the Lockly app code scanner to unlock. A QR code sticker (blue color) comes together with your lock. Open the Lockly app and scan it to unlock. You may also generate a unique QR code via Lockly app for your smart lock. You can generate QR code, print according to the size you want and stick it next to your door. 4.7 Locking/Unlocking with Door Handle This smart lock is built with an anti-friction latch and deadbolt throw (698D only) for added security. The latch throw can be setup to auto lock based on your customized timing through the Lockly app. To UNLOCK push the handle downwards and push door to open. This action is necessary to open your door whenever you access by keypad, fingerprint RFID card or smartphone App. On both 698L or 698D, the latch throw will auto lock according to your customized time or simply lift the handle to lock the latch throw. On 698D, the deadbolt throw will lock when the handle is lifted upwards. Follow instructions on Lockly app on handle configuration to ensure the lock correctly detects whether the door is lock or unlock. LIFT HANDLE UPWARDS TO LOCK DEADBOLT 22 SECTION 4.6 ~ 4.7 4.8 Safe Mode - Overview Lockly Vision will enter Safe Mode when ten (10) consecutive wrong Access Codes are entered within 5 minutes. When in Safe Mode, the lock status icon will start to flash. To disable Safe Mode, you must unlock the door using a registered fingerprint, access via mobile app, unlock using the keyhole, pressing the Lockly logo button on the interior panel or by pushing down the interior handle or enter the correct Access Code twice in a row. Activate the keypad by pressing and holding for 3 seconds. Once the screen is activated, enter the correct Access Code carefully twice, pressing after every time. If you enter the wrong code, the keypad will then be disabled for 10 minutes. Countdown Prompt

(Displayed in Minutes) Will start with 10 and countdown until 0. Example A Example B You will see a 10 on the screen, notifying the number of minutes that the keypad is disabled for. After 10 minutes, you may attempt to enter the correct Access Code to unlock the door. After the second incorrect attempt to unlock the lock with the wrong Access Code, Lockly Vision will disable the keypad for 20 minutes, displaying a 20 on the screen. After the third wrong attempt to unlock the door with the correct Access Code, the screen will be disabled for 30 minutes. (Example A and Example B above). Note: In order to conserve power, the countdown prompt will only be displayed for 3 seconds. You can reactivate the screen by sliding your hand across the screen. SECTION 4.8 23 4.8 Disabling Safe Mode There are five (5) ways to disable Safe Mode. Option 1 - Entering Correct Access Code Activate the keypad by pressing and holding for 3 seconds. Enter the correct Access Code twice (2) when the keypad is available, pressing after every time the Access Code is entered. Option 2 - Lockly App Use the app that is synced to your Lockly Vision to disable Safe Mode by unlocking the door. If you have not downloaded the app to use with your smart lock, you wont be able to use this option to disable Safe Mode. Option 3 - Physical Key There is a pair of keys included with your new lock. You may use the keys to manually unlock the door. To learn how to use your physical keys, see Section 4.4. Option 4 - Registered Fingerprint Use any registered fingerprint to reactivate the keypad. The door will unlock and reactivate the keypad once a registered fingerprint is used. Option 5 - Registered RFID card Use any registered RFID card to reactivate the keypad. The door will unlock and reactivate the keypad once a registered RFID card is used. 24 SECTION 4.8 4.9 Childproof Switch The Childproof Switch is designed to prevent children or adults with mental disabilities (such as Dementia or Alzheimers) from wandering outside or away from home. When Childproof is activated, the interior handle will be disabled to unlock. Follow the below instructions to activate this feature:

The childproof switch is located on the handle of the interior lock. The lock ships default with this feature deactivated. Toggle the switch away from the interior panel to activate. SECTION 4.9 25 4.10 Rain Mode Like other digital electronic products water can trigger to activate the touchscreen and sensor which may cause the batteries to drain. To protect the lock and extend battery life, you can setup your Lockly Vision to enter Rain Mode to shut off keypad and fingerprint reader whenever rain or water is detected. Activate this feature on the Lockly app. While you are within the Bluetooth range or remotely connected thru Wi-Fi hub (Secure Link), go to Settings >

Rain Mode and toggle the button to turn ON. IMPORTANT When RAIN MODE is ON, the keypad, RFID card and fingerprint sensor cannot be used. Unlock via Lockly app or, physical key. Rain Mode auto exits every 30-mins and re-enters if water or rain is still present. If you are using the Lockly app, you will be notified when Lockly Vision entered rain mode and it will be recorded in your access history. If you have not yet connected your device to Lockly app, follow below steps to activate the rain mode feature:

RAIN MODE ON RAIN MODE OFF 1. Long press to enter fixed digit keypad. 2. Enter access code +234+ . example: 135790 + 234 +

3. You will hear a short beep and Bluetooth indicator flashes green once Rain Mode is ON. 1. Long press to enter fixed digit keypad. 2. Enter access code +890+ . example: 135790 + 890 +

3. You will hear a long beep and Bluetooth indicator flashes green once Rain Mode is OFF. 26 SECTION 4.10 4.11 Shine Mode Lockly Vision touchscreen keypad brightness was designed for optimum battery life. However, some users may need to adjust the brightness to their convenience to enter access codes. Swipe your fingers across the keypad to light up to its normal brightness. To adjust brightness, long press the upper left button for 3 seconds. The touchscreen keypad with automatically return to normal brightness after the screen dimmed. 4.12 Welcome Mode Welcome Mode temporarily disables auto locking, keeping the door open for a specified period of time eliminating the need to enter access codes, fingerprint or using Mobile app. Enable this feature through the Lockly app. Go to > Settings > Enable Welcome Mode, then slide button to enable and set the specific time you require your door unlocked. NOTICE To ensure Welcome Mode works normally after replacing the battery, reconnect the lock to the Lockly app to synchronize the time. SECTION 4.10 ~ 4.11 27 5.1 Video Doorbell Lockly Vision has a built-in HD video doorbell with real-time video streaming on your smartphone and real-time 2-way voice interaction. Recordings are stored locally on the TF card, with no monthly fees, and you can access video recordings from anywhere using the Lockly app. To enjoy these features, make sure the below procedures are done correctly:

Setup the Vision Connect Hub according to Installation Manual

(See Step 11) Download the Lockly app and connect Lockly Vision according to on-screen instructions Allow your smartphone to receive push notifications or alerts from your Lockly app. Please check on iOS or Android procedures for allowing push notifications and alerts. If you're an existing Lockly app user, make sure you have the latest firmware. Go to Settings > Firmware Upgrade. Doorbell When someone press on the doorbell button, the smart lock will ring. The LED lights indicate the following:

- Vision is initiating the call. If the red light flashes, it failed to connect to the hub or network.

- Vision is sending app push notification and waiting for response.

- Ready to Talk ( 3 blinks) REMINDER: Install the provided Please Ring Doorbell on Door Lock plate on a clean and dry surface pointing the arrow to Lockly Vision to remind guests. 28 SECTION 5.1 5.1 Video Doorbell (Continued) When the doorbell is pressed, you will receive a notification through the Lockly app. Once you tap on the notification, app will automatically open to allow you to see who's at your door. Tap the Call icon to initiate conversation. Enhanced Alert Notification Lockly Vision has an enhanced alert notification feature. When someone rings your doorbell and you were unable to answer, you will receive a 2nd alert notification. We suggest you keep this feature ON if you expect to be in areas with unreliable internet connection and you do not wish to miss any important visitors. You can switch off this feature in the Lockly app, otherwise. SECTION 5.1 29 5.1 Video Doorbell (Continued) Vision enables you to attend to your door when you are not at home. While using the app, you can use the icons below to view, initiate conversations and unlock door. Live View You can open the Lockly app and tap on the camera to see what Vision sees at all times. Microphone Tap mic to mute or unmute. End Call Tap icon to hang up without opening the door. Unlock Tap icon to unlock door. TIP: Limit video interaction with guests to prolong battery life. 30 SECTION 5.1 5.1 Video Doorbell (Continued) Video Recording Lockly Vision stores video recording on the local TF card and recording can be accessed on the log history on your Lockly app. Vision automatically initiate video recording when below conditions take place:

Keypad was used to unlock Doorbell was pushed Offline Access Code was used*

eKey was used*

Wrong (PIN) access code was used and lock entered in to Safe Mode REMINDER:

- Video recordings can be custom-

ized through the Lockly app settings*.

- Ensure the TF card is properly inserted on Vision Connect to save the recordings1. 1Lockly Vision TF card with regular use can store up to 1-year worth of video recordings. SECTION 5.1 31 6.1 Offline Access Code (OAC) The Offline Access Code (OAC) is a unique feature of our smart lock. It allows you to grant access to guests remotely without guests needing to download the app. To use the OAC feature, make sure you download the Lockly app for iOS or Android first, and sync your smart lock to your mobile device. OAC can only be issued by the administrative owner of the lock. From there, you can then issue an Offline Access Code within the app. Go to Access and choose Add a New User, then select Offline Access Code (OAC) and follow on screen instructions to generate your Offline Access Code. Understanding Offline Access Code (OAC) OAC are issued to the guest by asking them to enter 4-12 digit number after a double - click on the . Your Lockly Vision randomly generates the Offline Access Code which can be shared to your guests together with the instructions generated using the Lockly app. After a double-click on the , touchscreen will display numbers on Fixed Digit mode, then guest can enter the Offline Access Code. 32 SECTION 6.1 6.2 Sub Admin Access Sub-Admin Access can be created to grant access for others to be able to control your lock and grant access to others via Bluetooth when within range of your Lockly Vision smart lock. The sub-admin permission can be setup through the Lockly app then Add A New User. You can select the Validity Period and User Permissions of the sub-admin. Sub Admins will not be able to access the lock remotely but Sub Admin will be able to grant limited access codes to users when within Bluetooth range. Once Sub Admin control is setup, you as the Admin will no longer be able to issue Offline Access Code (OAC) The Sub-Admin access is ideal for long term property leasing and Airbnb tenants. 7.1 Re-keying Lockly Vision smart lock comes with a 5-pin cylinder which can be replaced with regularly purchased DIY re-keying kit available in the market. If you are not familiar with this process, please contact a professional locksmith. For more information, visit: http://support.Lockly.com/faq/rekeying/

SECTION 6.2 ~ 7.1 33 8.1 Important Notes Auto Lock Feature Your lock can be programmed to auto-lock between 5-300 seconds after the door opening. You can select the timing through the Lockly app. If auto-lock is not activated and door is still open, the touchscreen will remain lighted, simply press the on the keypad to lock. One-Touch Locking You can always manually do a quick lock by touching anywhere on the touchscreen. Lockly Vision smart lock is shipped with this feature already activated. You may deactivate this feature through the Lockly app. 9V Backup Access When your Lockly Vision is out of power, you can temporarily activate the keypad by using a 9V battery against the bottom of the exterior side of the smart lock. Please see Section 2.5 for more info. Physical Keys / Tamper Proof Recording Even though you have your fingerprints registered and Access Codes stored, its always best practice to carry your physical keys with you at all times in case for any reason your lock falls into Safe Mode. Your video recording will be triggered whenever a key is used. Activation Code You may find an Activation Code Card with an Activation Code included in your package. It is very crucial that you do not lose this card. Please store this card safely as you will need the default Activation Code on that card to master reset your lock in case, for any reason, you have lost the phone paired to Lockly Vision and also forgot your Access Code. Troubleshooting Please visit http://Lockly.com/support for troubleshooting and the most frequently asked questions and answers. 34 SECTION 8.1 9.1 Cleaning Making sure your Lockly Vision is clean is best practice to ensure optimal product use. Follow the DOs and DONTs below. DO DONT Rinse the touchscreen with warm water prior to cleaning. Use the application of soap with a damp, lukewarm cloth. Air dry or wipe dry with a soft microfiber cloth to avoid scratches. Dont use abrasives, high alkaline cleaners, or gasoline to clean your lock. Dont apply cleaning deter-

gent directly in sunlight or at high temperatures. Dont leave cleaning deter-

gent on the display keypad for long periods of time - wash immediately. Dont use scrapers, squee-

gees, or razors. 9.2 Calibrating the Lock If the lock was not used for a long period of time, the lubrication of the inside mechanism may affect its unlocking responses. Dust and freezing temperatures may also cause your lock to delay or not to respond to unlocking. Calibrate your lock to maintain its responsiveness. Calibration may take 60 seconds to finish. You will hear the lock unlocking for multiple times. The unlocking sound will stop once the calibration is finished. To calibrate the lock, enter access code + 1234 + . example: 135790+1234+

NOTE: You may also calibrate the lock using the Lockly app. Open the app, select the lock and go to > Settings > Calibrate. SECTION 9.1 ~ 9.2 35 10.1 Safety Precautions Please read all instructions carefully. Remind all Lockly Vision users of the safety precautions. Read the following instructions for your own safety Do not attempt to disassemble the smart lock by yourself. It can cause product damage, void warranty, and cause injuries. Do not use any inappropriate tools that can cause damages or malfunction to your lock. Always make sure your door is securely closed and locked when you leave your house to prevent unwanted entry. Please keep your Access Codes safe. Restrict access to the back panel of your smart lock and check your settings regularly to ensure Access Codes have not been changed without your knowledge. Always dispose of used batteries according to your local laws. DO NOT BURN. Unauthorized changes and modifications may void your product warranty. If you have questions or any problems while using your Lockly Vision Smart Lock, contact our customer service department at help@Lockly.com or visit http://Lockly.com/help for technical assistance. 36 SECTION 10.1 FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with minimum distance 20cm between the radiator & your body. IC WARNING This equipment contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

1. Lappareil ne doit pas produire de brouillage;

2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. IC Radiation Exposure Statement This equipment meets the exemption from the routine evaluation limits in section 2.5 of RSS-102. It should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. Cet quipement est conforme l'exemption des limites d'valuation habituelle de la section 2.5 de la norme RSS-102. Il doit tre install et utilis une distance minimale de 20 cm entre le radiateur et toute partie de votre corps. WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. To ensure you have access to the most updated and newly added features of your Lockly Vision smart lock, please visit:

http://Lockly.com/help VISION (698LL) | LATCH EDITION Were here to help!

help@Lockly.com https://Lockly.com/help Copyright 2023 Lockly All rights reserved US Patent NO. US 9,881,146 B2 | US Patent NO. US 9,853,815 B2 | US Patent NO. US 9,875,350 B2 | US Patent NO. US 9,665,706 B2 | US Patent NO. US 11,010,463 B2 | AU Patent NO. 2013403169 | AU Patent NO. 2014391959 | AU Patent NO. 2016412123 | UK Patent NO. EP3059689B1 | UK Patent NO. EP3176722B1 | Other Patents Pending The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. , and any use of such marks by Lockly is under license. Other trademarks and trade names are those of their respective owners. Google, Android and Google Play are trademarks of Google LLC. UMPGD698LL20230509

ERPPL45A7UQ-GL-SMT00010A-V1 ERP P/N

: FCC ID IC:PL45A7UQ/PGD698LLSNSMT000,REV.A ,5022mm,80#,, 2ASIVPGD699RoHS2.0,REACH,Prop65POPsPAHs REV0.1 Designed Date2023-04-15 FCC ID: 2ASIVPGD699 IC: 25517-PGD699 HVIN: PGD698LL PRODUCT NAME: Lockly Vision This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two condions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operaon. Do not remove !

2 2 m m 50mm Label location

PIN Genie, Inc. DBA LOCKLY Agent Authorization Letter 2023-07-12 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:

We, the undersigned, hereby authorize (The Hong Kong Standards and Testing Centre Limited) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Print name: Cindy zhou Title: COO Signature:

PIN Genie, Inc. DBA LOCKLY 2023-07-12 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID: 2ASIVPGD699) The applicant: PIN Genie Inc, DBA LOCKLY. certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Print name: Cindy zhou Title: COO Signature:

PIN Genie, Inc. DBA LOCKLY 2023-07-12 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCC ID: 2ASIVPGD699) The applicant: PIN Genie Inc, DBA LOCKLY. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Print name: Cindy zhou Title: COO Signature:

PIN Genie Inc, DBA LOCKLY. To : STC (Guangdong) COMPANY LIMITED DECLARATION OF IDENTITY Hereby we:

PIN Genie Inc, DBA LOCKLY.

(Name of Manufacturer) Basic Model Number:

PGD698LL HVIN:

PGD698LL Basic Brand Name:

Basic Product Name:

LOCKLY Lockly Vision Basic Test Report Application Number:

Declare the Circuit, PCB Layout, Electrical Parts and Outlook of the following product(s) are identical to the basic model:

New /

Additional Model Number(s): PGD698DLHVIN: PGD698LL New /

Additional Brand Name(s):

New /

Additional Product Name:

Except the following(s) :

Door handle PGD698DL. of ModelPGD698LL is shorter than model:

The non-RF boards, circuitry, exterior casing and color are no difference. We don't ave any of these devices been previously delisted from REL for non-compliance or the application rejected by ISED/CB. The length of the handle is different in order to apply to different doors,so wehave made a model distinction to make it convenient for customers to choose and purchase. Remarks:

Signature with Company Chop :

Printed Name : Cindy zhou DATE:

2023/7/13 MANUFACTURER: Smart Electronic Industrial (Dongguan) Co., Ltd Address : Qing Long Road, Long Jian Tian Village, Huang Jiang Town, Dong Guan, Guang Dong, China Updated on 2005/02/07 by Kally Chan

PIN Genie, Inc. DBA LOCKLY Long Term Confidentiality Request Letter Date: 2023-07-12 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: Lockly Vision MODEL: PGD698LL, PGD698DL FCC ID: 2ASIVPGD699 To Whom It May Concern:

This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (block diagram/schematics /operational description ) required to be submitted with this application be permanently withheld from public review. The above documents are company proprietary information that could never get into the possession of your competition. Please contact me if there is any information you may need. Sincerely, Print name: Cindy zhou Title: COO Signature:

Attestation Statements -US agent 2023-07-12 TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for (FCC ID: 2ASIVPGD699) PIN Genie, Inc. DBA LOCKLY the undersigned, hereby authorize (PIN Genie, Inc. DBA LOCKLY) to act as our designated U.S. agent for service of process, PIN Genie, Inc. DBA LOCKLY accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment.

(PIN Genie, Inc. DBA LOCKLY) accepts the responsibility to act as designated U.S. agent for service of process, provides an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Information Company name:

Address:

FRN:

Contact Name:

Telephone No:

Email:

Signature

[name] Cindy zhou PIN Genie, Inc. DBA LOCKLY 676 Transfer Rd., St. Paul, MN 55114 0028246908 Cindy zhou 4159109522 biz@pin-genie.com U.S. Agent Information:

Company name:

Address:

FRN:

Contact Name:

Telephone No:

Email:

PIN Genie, Inc. DBA LOCKLY 676 Transfer Rd., St. Paul, MN 55114 0028246908 Cindy zhou 4159109522 biz@pin-genie.com Signature

[name] Cindy zhou