ERPPL3572FCQ-GL-SMT00010A-V1
::PL3572FCQ/PGD628FNC,SMT000,REV.A(UMPGD62820220707,196x196mm,
:128g,:80g,1632 RoHS2.0,REACH,Prop65POPsPAHs ERP P/N REV1.0 C K 7540C Designed Date2022-07-07 LATCH EDITION SECURE PLUS with Fingerprint and RFID Card USER MANUAL PGD628FC Table of Contents Section 1 - Product Highlights 1.1 Product Features Section 2 - Product Overview 2.1 Product Overview - Exterior 2.2 Product Overview - Interior 2.3 Understanding Your New Lock 2.4 Reset Button 2.5 Keypad Display Switch 2.6 Rebooting Your Lock 2.7 Low Battery 2.8 Changing The Battery Section 3 - Using Your Smart Lock 3.1 Configuring Access 3.2 Adding a Fingerprint 3.3 Fingerprint Scanning Directions 3.4 Fingerprint Scanning Tips & Troubleshoot 3.5 Adding an RFID card 3.6 Adding Secure Link 9 10 12 13 14 14 1 2 3 4 5 5 6 7 8 4.4 Unlocking using RFID 4.5 Locking/Unlocking using Physical Key 4.6 Locking/Unlocking using Voice Assistants 4.7 Safe Mode 4.8 Rain Mode 4.9 Shine Mode 4.10 Welcome Mode 18 18 19 20 22 23 23 Section 5 - Advanced Features 5.1 Offline Access Code (OAC) 5.2 Sub-Admin Access Section 6 - Re-keying 6.1 Re-keying Section 7 - Important Notes 7.1 Important Notes Section 8 - Maintenance and Cleaning Section 4 - Locking and Unlocking 4.1 Unlocking using Access Codes 4.2 Unlocking using Fingerprint 4.3 Locking/Unlocking using App 15 16 17 8.1 Cleaning 8.2 Calibrating the Lock Section 9 - Safety Precautions 9.1 Safety Precautions 24 25 25 26 27 27 28 For additional support, visit http://Lockly.com/help or email help@Lockly.com TABLE OF CONTENTS 1.1 Product Features Patented Hack-Proof PIN Genie Keypad Digits are randomly displayed on the key pad ensuring access codes to be undetectable to intruders after repeated use. Numbers are randomly distributed across 4 buttons, with 3 numbers in each button. Users can press any button showing their number. Location of the numbers are always different every time someone uses the keypad, making it hard for prying eyes to guess the correct code. Multiple Access Codes & Monitoring Store up to 18 Access Codes for family, friends and guests, as well as monitor entry and exit records. Advanced 3D Fingerprint Recognition Biometric Fingerprint Recognition protocol allows up to 99 registered fingerprints to be used and accepts only actual fingerprints - preventing lifted prints from being used. Live Monitoring and Voice Control Through your smartphone, monitor door access from anywhere in the world and securely control who comes and goes. You can also control your Lockly smart lock using your voice with Amazon Alexa or Google Assistant-enabled devices. Complete Privacy The exterior displayed keypad can be locked and switched off using the simple ON/OFF toggle from the inside panel. The owner can prevent others trying to input the passcode from the outside and entering the home. Offline Access Code (OAC) The offline access code can allow owners to issue access codes, set the allowed access duration, all without Lockly ever connecting to the internet, so in case of power outage, you can still magically and remotely issue Access Codes without any connection to the web. Auto-Lock Users no longer have to worry about forgetting to lock the door. With Auto Lock enabled, Lockly will automatically auto-lock the door based on your customized timing set between 5-300 seconds. Backup Keys and 9V Battery Socket The door can be opened with physical backup keys. There is also a 9V battery connection socket for emergency power backup to access the keypad in case your smart lock runs out of battery. SECTION 1.1 1 2.1 Product Overview - Exterior Reboot 2 RFID Card Reader Keypad Buttons Touchscreen Welcome/Safe Mode Battery Indicator OK Button Fingerprint Sensor Bluetooth Indicator Handle Key Hole Cover Key Hole 9V Battery Backup Socket SECTION 2.1 2.2 Product Overview - Interior Battery Compartment Screw Battery Compartment 4 x AA Alkaline Batteries(Included) Battery Compartment Cover Beep Alert Low Battery Indicator/
Door Lock Button Keypad Display Switch Inside Handle Reset Button Program Button SECTION 2.2 3 2.3 Understanding Your New Lock After the installation of your new Lockly, understanding some key functions of operating your smart lock is important. The following guides will walk you through resetting a lock, adding/ deleting Access Codes, adding/deleting fingerprints, adding/deleting RFID cards, configuring your Offline Access Code
(OAC) and other features of your lock. To access these features, you will need the Lockly app and a registered account. You may visit the link below to download the app if you haven't done so. For any questions you can always visit http://Lockly.com/help for assistance. Scan or visit Lockly.com/app 4 SECTION 2.3 2.4 Reset Button In order to restore the Lockly Secure to factory default settings, you must have your Activation Code available. The Activation Code can be found on the Activation Code Card that came with your smart lock. After you have the Activation Code ready, push the reset button on the back panel of the Lockly Secure to perform your reset. See below to see which Reset Process applies for you. Once the smart lock has been reset, all the data previously stored will be deleted. Reset Button If Paired with App If Never Paired Press Reset Button for three (3) seconds Press Reset Button for one (1) second and till you hear a short beep. Open the Lockly smartphone app to add your lock using the Activation Code 2.5 Keypad Display Switch The exterior keypad screen can be locked and turned off by using the ON/OFF switch at the back panel (interior) of the smart lock. When it is switched off, people who are outside cannot enter any access codes to unlock the door. SECTION 2.4~2.5 5 2.6 Rebooting Your Lock NOTICE Reboot Lockly in case of dead battery or malfunction. No settings will be changed and all Access Codes will still be stored within Lockly. Press and release the reboot button when you want to reboot the lock. Your Lockly will beep once after reboot. Only reboot when necessary. To reboot, find the reboot button located on the bottom of the exterior side of Lockly lock. The reboot button is located in the middle of the two 9V battery backup sockets. You will need something small such as a paperclip, to press the reboot button. Insert the paperclip and press down firmly and let go. Your screen should restart and the lock should reboot automatically. Reboot Button 6 SECTION 2.6 2.7 Low Battery When the battery is in seriously low condition, Lockly will make continuous beeping sounds in addition to the flashing low battery icon on the touch screen. You should replace batteries immediately to avoid your smart lock from shutting down. When your smart lock low-battery warning alert finally dies, you will have 3 chances to unlock your smart lock either by a password, APP or fingerprint. If the unlock was successful, the low-battery warning alert will be on for 1 minute. After which, the smart lock will go to dead-battery mode and will lock auto lock in 5 seconds and the screen will display a low-battery icon. Condition Indicator Solution Low Battery Battery Icon on the display keypad will light up to indicate low battery. Dead Battery When there is no display and sounds; and screen is non-functional. Replace batteries immediately to avoid battery failure. Lockly Secure can still operate up to 300 cycles in low battery condition. Replace batteries immediately. Supplied physical backup keys can be used to unlock the door. Alternatively, use a 9V battery as shown below to temporarily activate the lock. Your Lockly will automatically detect battery polarity. So hold your 9V battery lead in place against bottom of the Lockly to temporarily activate the screen to enter your Access Code. Be sure to hold the 9V battery against the contact points located at the bottom of the lock until you have successfully unlocked your door with your Access Code. Once unlocked, batteries should be replaced immediately.
9V Battery SECTION 2.7 7 2.8 Changing The Battery Under normal use, the Lockly battery will last up to a year. Please check battery levels regularly and change your batteries when the low battery notification is issued. For best practice, always use new batteries by a major brand. Open the battery compartment cover and insert four (4) new AA alkaline batteries as shown. Be sure to unscrew the screw located on the top of the cover first by unscrewing counterclockwise before sliding the cover up. 1 Screw 2 3 AA 1.5V X 4
- Make sure the batteries are oriented correctly by matching the orientation displayed.
- Replacing the batteries do not reset stored Access Codes.
- To see a list of recommended brands, please visit http://Lockly.com/battery NOTICE Whenever batteries are replaced, reconnecting the smart lock to your smartphone App is required. If you have not yet downloaded the app, visit: Lockly.com/app 8 SECTION 2.8 3.1 Configuring Access IMPORTANT: Pairing your lock to your smart phone is required to manage your access codes, fingerprints and RFID cards. To pair you lock, you need to download the Lockly app and the Activation Code Card, then follow on-screen instructions. There are a total of five (5) buttons on the keypad as shown in the example image to the left. The numbers in each button may differ than what is shown on your device than what is displayed here. To enter your required digit, just simply press the circle where your number is shown. You do not need to press the actual number as anywhere within the circle will suffice. The button on the bottom is the OK button. You will be pressing this button when you are done entering your Access Code. OK Button NOTICE The Default Access Code is 1 2 3 4 5 6 Your new Lockly Access Code can be any combination of 6 to 8 digits. Once a new Access Code is entered, the Default Access Code of 123456 would be deleted. A maximum of 16 sets of Access Codes can be stored for use at any given time. To add more than 16 sets of Access Codes, you must delete an existing Access Code before adding a new code. There are different types of Access Codes that can be generated using the Lockly App. Each type of access code have different levels of permission you can select for your guests, tenants, deliveries, helpers, etc., Get the latest updates on access codes, visit: www.support.lockly.com/faq/accesscodes/
SECTION 3.1 9 3.2 Adding a Fingerprint We are using an advanced biometric sensor, providing the most secure fingerprint authentication. For security reasons, Lockly will only accept fingerprint patterns that consist of cross intersection points. Patterns with no cross intersection points will not be acceptable. Please check your fingers before registration to make sure the finger you want to register will be acceptable by our system. Otherwise, use an alternative finger to ensure successful registration. The following examples show which types of fingerprint patterns will be acceptable. It is highly recommended to enroll at least one finger from each hand in case the hand you are using is unavailable, such as, in instances like if you are holding items in that hand or have sustained an injury. Fingerprint Pattern with Cross Intersection Lines Concentric or Parallel Pattern with no Cross Intersection Lines Fingerprint with Scars or Worn Out Ridges OK Not OK Not OK Your smart lock can register up to ninety-nine (99) fingerprints. Please read the following sections if you want to add or delete fingerprints. We recommend using your app to add fingerprints, however, the following section can show you how to add and remove fingerprints if you did not pair your lock with a smart phone. NOTICE Please make sure your fingers are clean from dirt and oils before scanning your fingerprint. Make sure the sensor is also clean by taking a soft cloth and wiping the surface. 10 SECTION 3.2 3.2 Adding a Fingerprint (Continued) Once youre in Fingerprint Registration Mode you will see two numbers displayed on keypad. The top number is your Fingerprint Registration number, in this example to the left, 1. The bottom number will always start with a 6. You must successfully scan your fingerprint six (6) times for it to properly register. Every time you scan your fingerprint, the number on the bottom will change, starting from 6 - then 5, 4, 3, 2, 1, until the fingerprint is successfully registered. PASS will be displayed on the keyboard and automatically returns to number keypad. If you did not successfully register your fingerprint, FAIL will show on the keypad. If FAIL is displayed, return to the previous menu and rescan your finger. OK Button SECTION 3.2 11 3.3 Fingerprint Scanning Directions The fingerprint sensor equipped in your smart lock is loaded with powerful fingerprint algorithms to extract only metadata from fingers, even in poor conditions. Placing your finger on the sensor correctly helps consistency in fingerprint recognition. The following directions and tips will guide you on how to scan an optimal fingerprint image. Sensor Core Correct Incorrect Position your finger on the center of the sensor Top View OK Side View OK 12 SECTION 3.3 3.4 Fingerprint Scanning Tips & Troubleshoot Tips for Fingerprint Enrollment and Recognition Place your finger to completely cover the sensor with maximum contact surface. Position the center of your finger (core) to the center of the sensor. Hold your finger still for more than a second until you hear a beep. Scan a finger that is clean and free from dirt. Children ages 12 and under are not recommended to use fingerprint access due to the constant changes of their fingers during growth. Elderly with fading fingerprints may have difficulty in recognition. If your finger has a cut, scar, or cracked skin due to dryness, try another finger. Troubleshooting Fingerprints In case of poor fingerprint conditions If wet - wipe excess moisture from finger before scanning If dirty - wipe stains and dirt off from finger before scanning Make sure the sensor is clean from dirt or smudges - wipe sensor with soft cloth regularly For more troubleshooting help, visit http://Lockly.com/help SECTION 3.4 13 3.5 Adding an RFID card Once youre in RFID Registration Mode, the screen will display the RFID card series number when adding. Place the RFID card to the screen where the RFID card sensor is embedded. PASS will show on the keypad once card is registered successfully. 3.6 Adding Secure Link Lockly Secure Link adds live status monitoring and voice control capabilities to your Lockly Smart Lock. If you purchased a Secure Pro model, the Secure Link is included in your package. For all other Lockly products, the Secure Link can be purchased and added anytime. To set up the Lockly Secure smart lock with Secure Link Wi-Fi Hub and Door Sensors, launch the Lockly App on your iOS or Android device. From the main menu drop down located on the upper left of the screen, select Add a New Device then select Secure Link Wi-Fi Hub. Follow the in-app instructions to set up your Secure Link. To activate voice commands, you will need Amazon Alexa or Hey Google. Make sure you enable the Lockly Action on Google or the Amazon Alexa Skill before you can configure your voice to perform voice commands. Included in Secure Pro and sold separately for other models. Visit the link below to purchase:
https://Lockly.com/hub 14 SECTION 3.5 ~ 3.6 4.1 Unlocking using Access Codes Lockly Smart Lock can be unlocked using multiple ways - via your stored Access Code, registered fingerprint, smartphone with Bluetooth, the physical key supplied with your lock, or voice (Secure Pro only or Secure Plus with Secure Link Wi-Fi Hub installed) Slide your hand across the screen to activate the keypad. Enter your 6 to 8 digit Access Code followed by the OK button. Press OK anytime to reset if you entered the wrong digit. If the Access Code entered is correct, the door will unlock. If the Access Code entered is incorrect, Lockly will beep twice. OK Button Three consecutive wrong attempts will put Lockly in Safe Mode. (See Section 4.7) Lock your Lockly by pressing the OK Button or by brushing your hand across the screen anytime when the door is closed. The smart lock will also auto-lock after unlocking based on your set auto-lock settings. PIN Genie Fixed Digit You may toggle between two types of keypad displays to enter your Access Code. The fixed digit version and the PIN Genie version (Recommended). Press and hold the OK Button for 3 seconds to toggle back and forth between the two keypads.
(Sample display shown only) Hold OK (3 sec) SECTION 4.1 15 4.2 Unlocking Lockly using Fingerprints Unlocking Place a registered finger to the fingerprint scanner located on the exterior side of the lock to the right. To register a fingerprint, please see Section 3.6. If your fingerprint is registered and acknowledged, you will hear a beep sound and a Green LED will light up on the fingerprint scanner. You can then push down the handle and open the door. If you see a Red LED, it means your fingerprint is not recognized. Try again or use another registered fingerprint. For best fingerprint scanning practices, see Section 3.7. OK Button Locking To lock your smart lock, press the OK Button anytime or brush your hand across the screen when the lock is unlocked. 16 SECTION 4.2 4.3 Locking/Unlocking using App You must have the Lockly iOS or Android app installed in order to lock and unlock with smartphone and connect with your Amazon Alexa or Google Assistant-enabled devices. Please download the app by visiting the link below or search Lockly from the correct app store. Scan or visit Lockly.com/app SECTION 4.3 17 4.4 Unlocking using RFID Light up the screen by touching the keypad. Place your RFID card closer to the panel. 4.5 Locking/Unlocking using Physical Key To unlock your lock using the phys-
ical key (included), open the key cover by sliding the cover on either clockwise or counterclock-
wise to reveal the keyhole. Insert key and turn clockwise (right swing door) or counterclockwise
(left swing door) to unlock the door. Push down the handle and open the door after it chimed. Exterior View 18 SECTION 4.4 ~ 4.5 4.6 Locking/Unlocking using Voice Assistants Once your Lockly Smart Lock and Secure Link Wi-Fi Hub has been installed and configured correctly, make sure you enable the Lockly Action on Google or the Amazon Alexa Skill before you can configure your voice to perform voice commands. You can ask your questions such as door status or request for your door to be locked or unlocked
- Hey Google, unlock the Back Door
- Hey Google, is the Back Door locked?
- Hey Google, lock the Back Door
- Hey Google, is the Back Door unlocked?
Pre-setup is required in the Google Home app in order for these queries to work. The user would need to the name the lock "Back Door" or as appropriate.
- Alexa, unlock my Front Door.*
- Alexa, is my Front Door locked
- Alexa, lock my Front Door.
- Alexa, is my Front Door unlocked
*Unlock requests will require additional voice security codes. You may configure it in the settings page. Included in Secure Pro and sold separately for other models. Google, Android, Google Play and Google Home are trademarks of Google LLC. SECTION 4.6 19 4.7 Safe Mode - Overview Lockly will enter Safe Mode when three (3) consecutive wrong Access Codes are entered within 5 minutes. When in Safe Mode, the lock status icon will start to flash. To disable Safe Mode, you must unlock the door using the correct fingerprint or enter the correct Access Code twice in a row. Activate the keypad by pressing and holding for 3 seconds. Once the screen is activated, enter the correct Access Code carefully twice, pressing after every time. If you enter the wrong code, the keypad will then be disabled for 10 minutes. Countdown Prompt
(Displayed in Minutes) Will start with 10 and countdown until 0. Example A Example B You will see a 10 on the screen, notifying the number of minutes that the keypad is disabled for. After 10 minutes, you may attempt to enter the correct Access Code to unlock the door. After the second incorrect attempt to unlock the lock with the wrong Access Code, Lockly will disable the keypad for 20 minutes, displaying a 20 on the screen. After the third wrong attempt to unlock the door with the correct Access Code, the screen will be disabled for 30 minutes. (Example A and Example B above). Note: In order to conserve power, the countdown prompt will only be displayed for 3 seconds. You can reactivate the screen by sliding your hand across the screen. 20 SECTION 4.7 4.7 Disabling Safe Mode There are four (4) ways to disable Safe Mode. Option 1 - Entering Correct Access Code Activate the keypad by pressing and holding for 3 seconds. Enter the correct Access Code twice (2) when the keypad is available, pressing after every time the Access Code is entered. Use the app that is synced to your Lockly to disable Safe Mode by unlocking the door. If you have not downloaded the app to use with your smart lock, you wont be able to use this option to disable Safe Mode. There is a pair of keys included with your new lock. You may use the keys to manually unlock the door. To learn how to use your physical keys, see Section 4.5. Option 2 - Lockly Bluetooth App Option 3 - Physical Key Option 4 - Registered Fingerprint Option 5 - Registered RFID card Use any registered fingerprint to reactivate the keypad. The door will unlock and reactivate the keypad once a registered fingerprint is used. Use any registered RFID card to reactivate the keypad. The door will unlock and reactivate the keypad once a registered RFID card is used. While in Safe Mode, the keypad will not be lit up when you are using your Physical Key. To reactive the screen, use the Keypad Display Switch by toggling it OFF and ON. SECTION 4.7 21 4.8 Rain Mode Like other digital electronic products water can trigger to activate the touchscreen and fingerprint sensor which may cause the batteries to drain. To protect the lock and extend battery life, you can setup your Lockly to enter Rain Mode to shut off keypad and fingerprint reader whenever rain or water is detected. Activate this feature on the Lockly app. While you are within the Bluetooth range or remotely connected thru Wi-Fi hub (Secure Link), go to Settings > Rain Mode and toggle the button to turn ON. IMPORTANT When RAIN MODE is ON, the keypad, RFID card and fingerprint sensor cannot be used. Unlock via Lockly App, physical key, or voice control with Amazon Alexa or Google Assistant-enabled devices. Rain Mode auto exits every 30-mins and re-enters if water or rain is still present. If you are using the Lockly app, you will be notified when Lockly entered rain mode and it will be recorded in your access history. If you have not yet connected your device to Lockly App, follow below steps to activate the rain mode feature:
RAIN MODE ON RAIN MODE OFF 1. Long press to enter fixed digit keypad. 2. Enter access code +234+ . example: 135790 + 234 +
3. You will hear a short beep and Bluetooth indicator flashes green once Rain Mode is ON. 1. Long press to enter fixed digit keypad. 2. Enter access code +890+ . 3. You will hear a long beep and Bluetooth indicator flashes green once Rain Mode is OFF. example: 135790 + 890 +
22 SECTION 4.8 4.9 Shine Mode Lockly touchscreen keypad brightness was designed for optimum battery life. However, some users may need to adjust the brightness to their convenience to enter access codes. Swipe your fingers across the keypad to light up to its normal brightness. To adjust brightness, long press the upper left button for 3 seconds. The touchscreen keypad with automatically return to normal brightness after the screen dimmed. 4.10 Welcome Mode Welcome Mode temporarily disables auto locking, keeping the door open for a specified period of time eliminating the need to enter access codes, fingerprint or using Mobile App. Enable this feature through the Lockly App. Go to > Settings > Enable Welcome Mode, then slide button to enable and set the specific time you require your door unlocked. The Welcome Mode icon will remain displayed while in effect. NOTICE To ensure Welcome Mode works normally after replacing the battery, reconnect the lock to the Lockly app to synchronize the time. SECTION 4.9 ~ 4.10 23 5.1 Offline Access Code (OAC) The Offline Access Code (OAC) is a unique feature of our smart lock. It allows you to grant access to guests remotely without guests needing to download the app. To use the OAC feature, make sure you download the Lockly app for iOS or Android first, and sync your smart lock to your mobile device. OAC can only be issued by the administrative owner of the lock. From there, you can then issue an Offline Access Code within the app. Go to Access and choose Add a New User, then select Offline Access Code (OAC) and follow on screen instructions to generate your Offline Access Code. Understanding Offline Access Code (OAC) OAC are issued to the guest by asking them to enter 4-12 digit number after a double - click on the . Your Lockly randomly generates the Offline Access Code which can be shared to your guests together with the instructions generated using the Lockly app. After a double-click on the , touchscreen will display numbers on Fixed Digit mode, then guest can enter the Offline Access Code. 24 SECTION 5.1 5.2 Sub-Admin Access Sub-Admin Access can be created to grant access for others to be able to control your lock and grant access to others via Bluetooth when within range of your Lockly smart lock. The sub-admin permission can be setup through the Lockly App then Add A New User. You can select the Validity Period and User Permissions of the sub-admin. Sub Admins will not be able to access the lock remotely but Sub Admin will be able to grant limited access codes to users when within Bluetooth range. Once Sub Admin control is setup, you as the Admin will no longer be able to issue Offline Access Code (OAC) The Sub-Admin access is ideal for long term property leasing and Airbnb tenants. 6.1 Re-keying Lockly smart lock comes with a 5-pin cylinder which can be replaced with regularly purchased DIY re-keying kit available in the market. If you are not familiar with this process, please contact a professional locksmith. For more information, visit: http://support.Lockly.com/faq/rekeying/
SECTION 5.2 ~ 6.1 25 7.1 Important Notes Auto Lock Feature Your lock can be programmed to auto-lock between 5-300 seconds after the door opening. You can select the timing through the Lockly App. If auto-lock is not activated and door is still open, the touch-
screen will remain lighted, simply press the on the keypad to lock. One-Touch Locking You can always manually do a quick lock by touching anywhere on the touchscreen. Lockly smart lock is shipped with this feature already activated. You may deactivate this feature through the Lockly App. 9V Backup Access When your Lockly is out of power, you can temporarily activate the keypad by using a 9V battery against the bottom of the exterior side of the smart lock. Please see Section 2.7 for more info. Physical Keys Even though you have your fingerprints registered and Access Codes stored, its always best practice to carry your physical keys with you at all times in case for any reason your lock falls into Safe Mode. Activation Code You may find an Activation Code Card with an Activation Code included in your package. It is very crucial that you do not lose this card. Please store this card safely as you will need the default Activation Code on that card to master reset your lock in case, for any reason, you have lost the phone paired to Lockly and also forgot your Access Code. Troubleshooting Please visit http://Lockly.com/help for troubleshooting and the most frequently asked questions and answers. 26 SECTION 7.1 8.1 Cleaning Making sure your Lockly is clean is best practice to ensure optimal product use. Follow the DOs and DONTs below. DO DONT Rinse the touchscreen with warm water prior to cleaning. Dont use abrasives, high alkaline cleaners, or gasoline to clean your lock. Use the application of soap with a damp, lukewarm cloth. Dont apply cleaning detergent directly in sunlight or at high temperatures. Air dry or wipe dry with a soft microfiber cloth to avoid scratches. Dont leave cleaning detergent on the display keypad for long periods of time -
wash immediately. Dont use scrapers, squeegees, or razors. 8.2 Calibrating the Lock If the lock was not used for a long period of time, the lubrication of the inside mechanism may affect its unlocking responses. Dust and freezing temperatures may also cause your lock to delay or not to respond to unlocking. Calibrate your lock to maintain its responsiveness. Calibration may take 60 seconds to finish. You will hear the lock unlocking for multiple times. The unlocking sound will stop once the calibration is finished. To calibrate the lock, enter access code + 1234 + . example: 135790+1234+
NOTE: You may also calibrate the lock using the Lockly App. Open the app, select the lock and go to
> Settings > Calibrate. SECTION 8.1 ~ 8.2 27 9.1 Safety Precautions Please read all instructions carefully. Remind all Lockly users of the safety precautions. Read the following instructions for your own safety Do not attempt to disassemble the smart lock by yourself. It can cause product damage, void warranty, and cause injuries. Do not use any inappropriate tools that can cause damages or malfunction to your lock. Always make sure your door is securely closed and locked when you leave your house to prevent unwanted entry. Please keep your Access Codes safe. Restrict access to the back panel of your smart lock and check your settings regularly to ensure Access Codes have not been changed without your knowledge. Always dispose of used batteries according to your local laws. DO NOT BURN. Unauthorized changes and modifications may void your product warranty. If you have questions or any problems while using your Lockly Secure Smart Lock, contact our customer service department at help@Lockly.com or visit http://Lockly.com/help for technical assistance. 28 SECTION 9.1 FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with minimum distance 20cm between the radiator & your body. IC WARNING This equipment contains licence-exempt transmitter(s) that comply with Innovation,Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:
1. Lappareil ne doit pas produire de brouillage;
2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. IC Radiation Exposure Statement This equipment meets the exemption from the routine evaluation limits in section 2.5 of RSS-102. It should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. Cet quipement est conforme l'exemption des limites d'valuation habituelle de la section 2.5 de la norme RSS-102. Il doit tre install et utilis une distance minimale de 20 cm entre le radiateur et toute partie de votre corps. WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. To ensure you have access to the most updated and newly added features of your Lockly smart lock, please subscribe to our newsletters, follow us on our social media channels, update your Lockly app when prompted, or visit: www.Lockly.com/newfeatures For digital versions and instructional videos, please visit the following link:
http://Lockly.com/help SECURE Were here to help!
help@Lockly.com https://Lockly.com/help Copyright 2022 Lockly All rights reserved USA Patent NO. US 9,881,146 B2 | USA Patent NO. US 9,853,815 B2 | USA Patent NO. US 9,875,350 B2 | USA Patent NO. US 9,665,706 B2 | USA Patent NO. US 11,010,463 B2 | AU Patent NO. 2013403169 | AU Patent NO. 2014391959 | AU Patent NO. 2016412123 | UK Patent NO. EP3059689B1 | UK Patent NO. EP3176722B1 | Other Patents Pending The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. , and any use of such marks by Lockly is under license. Other trademarks and trade names are those of their respective owners. Google, Android, Google Play and Google Home are trademarks of Google LLC. , Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc., or its affiliates. UMPGD62820220707