!
GETTING STARTED
!
1. Make sure all items listed in the BOX CONTENTS are included in the box.!
2. READ ASFETY INSTRUCTIONS BEFORE USING THE PRODUCT.!
3. MAKE SURE THAT YOU HAVE COMPLETELY CHARGED THE BATTERY PROR TO FIRST USE FOR MAXIMUM BATTERY LIFE.!
Go to www.playwithyourproxy.com for product registration.!
!
BOX CONTENTS!
Proxy!
Wristband!
Micro USB Cable!
Power Adapter
!
BUTTON FUNCTIONS
!!
!!
!
!
!
Power On:!
!
Power Off:!
Launch Siri/S-Voice:! !
!
Cancel Siri/S-Voice:!
Lower Volume:!
!
Previous Song/Video:!!
Answer:!
!
!
!
Hang-up Call:!!
Ignore Incoming Call:!!
Play Song/Video:!
!
Pause Song/Video:!
!
!
Connect Proxy:!
Disconnect Proxy:!
!
!
Increase Volume:!
Next Song/Video:!
!
!
Press and hold button for 4 seconds to power on!
Press and hold button for 2 seconds to power off!
Press button to activate Siri/S-Voice!
Press button to cancel Siri/S-Voice!
Press and hold button to lower volume!
Press button to play previous song/video!
Press button to answer incoming call!
Press button to hang-up call!
Press and hold button for 1 second!
Press button to play song/video!
Press button to pause song/video!
Press button (Must already be paired)!
Press and hold button for 3 seconds!
Press and hold to increase volume!
Press button to play next song/video!
1
!
!!!
!
!!!!!!!!!!!
!
PAIRING A BLUETOOTH DEVICE PROXY LED ACTIVITY!
!
Blinking Red and Blue LEDs Not Paired/No Connection!
Blinking Blue LED!
Paired and Connected!
Solid Red LED!
Charging!
Blinking Red and Blue LEDs!
In Broadcast Pairing Mode!
No LED activity !
No Powered on/Sleep Mode!
Red and Blue LEDs will blink rapidly. !
!
1. Press and hold the power button for 4 seconds. The Proxys 2. Navigate to your Bluetooth devices setup screen, nd!
The Proxy and connect.!
3. If your device asks for a password or pin, skip or cancel!
the password or pin input screen.!
Note: The next time you approach The Proxy with your dddBluetooth device, it will automatically re-pair.!
4. To pair a new device, press and hold the phone button for 3 dddseconds to break the current connection. The red and blue dddLEDs will ash repeatedly. Repeat Step 2.!
5. If your Bluetooth device is not able to pair to The Proxy, hold !
phone button for 3 seconds to break previous Bluetooth c dddconnections and power the Proxy off, then back !
aaaNote: If you experience trouble pairing or playing music!
sssupdate your devicess OS.!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
2 The Proxy Model No: TP0603V1 Safety Information IC Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. FCC
!
!
!
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Modification or changes to this equipment not expressly approved by Radio Systems Corporation may void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a specific installation. If interference does occur to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
a) Reorient or relocate the receiving antenna. b) Increase the separation between the equipment and the receiver. c) Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. d) Consult customer care, the dealer, or an experienced radio/TV technician for help. 3