PWT-P100 Wireless Touch Pad Instruction V.1.0 CE Warning
!Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. EN Test Regulation Version ETSI EN 300 328 V1.7.1 ETSI EN 301 489-1 V1.8.1 ETSI EN 301 489-17 V2.1.1 EN 60950-1:2006+A11:2009 CAUTION: Any changes or modification in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CAUTION: Exposure to Radio Frequency Radiation. Antenna shall be mounted in such a manner to minimize the portential fo human contact during normal operation. The antenna should not becontacted during operation to avoid the possibility of exceeding the FCC radio frequency exposure limit. This device complies with part 15 of the FCC Rules. Operation is subject to the following two Conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation, for compliance could void the user's authority to operate the equipment. 1. Contents and Requirements Touch Remote Mouse is wireless remote control system combined with wireless PC and digital device. It provide the various solutions such as the office & educational device and electronic equipment at anywhere within 10m of its receiver. Page Down Page Up Mouse Pad Left Mouse Button Right Mouse Button Wheel Scroll Mouse Dongle 1.1 Package contents 1 Touch Remote Mouse 1 Mouse Dongle (USB type) 2 AAA 1.5V Batteries Instruction 1.2 System Requirements Any OS which supports HID mouse, including Windows, Linux Operating Voltage : 3V DC Up to USB 1.1 2. Installation and Pairing of Wireless Touch Pad Connecting the USB Dongle and Touch Pad by wireless is Pairing. 2.1 Installation Insert the 2 AAA batteries that came with +/- direction on the other side. Plug the receiver into any available USB port on your computer or digital device. It will automatically detect the receiver. 2.2 How to make Pairing Place the USB Receiver and remote controller within 15cm. Press and hold the mouses left and right mouse buttons at the same time for 5 seconds. After Pairing is completed, the mouse cursor on the PC screen moves to the right side as 2~3cm. Once connected as a pairing, it is recognized as a Pairing after reconnected. If the Pairing does not work within the actual effective distance which means that the mouse cursor does not move to the right side of the screen, take the batteries out of the remote controller and reconnect it within 15cm. 3. How to use Wireless Touch Pad 3.1 Mouse function Mouse Left/Right Key It works same as function of Left/Right Key of Mouse. If touch the Left Key (Double Touch), then this works as Click the Mouse Left (Double Click). If touch the Right Key, then this works as Click the Mouse Right Mouse Pad Same as the standard movement found on a typical computer mouse. If touch it (Double Touch), this works as Click the Mouse left (Double Click). If move it with Double Touch, then this works as Left Drag. 3.2 Page Up/Down Touch the Up/Down Key, this works as Page Up/Down Press the Up/Down Key, this works as a sequential key 3.3 Wheel Scroll Up/Down If you take down the Wheel Scroll, this works as Wheel Down. If you take it up, this works as Wheel UP. Wheel Up/Down works as a sequential key if press and hold it at the last position. 3.4 numeral recognition function It allows you to enter the applicable number after draw the figures from 0 to 9 on Mouse Pad under the condition of pressing the part of Wheel. If unable to move Scroll Wheel, please follow the instructions that you can press the lower part of the dotted line and move it up to the arrow. Then, it moves up. If you can press the top of dotted line and move down it to the arrow, it moves down. When you use the numeral recognition function, the possibility of success is high if you draw the Number exactly as it is. SPECIFICATION Operation Temperature
-10 ~ 50 degree Service coverage Operating Voltage Electrocity Consumption Upto 10m 3V DC Over 10m in the open space, the receive sen sibility might be weaker and mouse control may be malfunctioned. AAA type Battery x 2 PCS Mouse Operation Mouse Stop Sleeping Mode 18 mA 9 mA 90 uA Without working for 10 seconds, it automatic ally turns to slpeeing mode. Supporting OS Interface Any OS which supports HID Mouse, incluidng Windows, Linux and ETC. Upto USB 1.1 Receiver Dongle
*This specification is subject to change without notice Wireless Specifications Operation Frequency 2.403 ~ 2.475 GHz Modulation GFSK (Gaussian Frequency Shift Keying) Channel Output(dB) 5 0dBm Oscillation mode crystal (16MHz)