Criteria of product operation :
EN71 EN62115 ASTM F963 CPSIA FCC warning:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is, connected. Consult the dealer or an experienced radio/TV technician for help. Certificate of approval Fc b akacazors0noaae This device com plies w ith Part 15 of the FCC Rules. 0 peration
'S subject to the follow ing two conditions:
() this device m ay not cause ham fu interference, and
) this device m ustaccept any interference received, including interference thata ay cause undesired operation Installation and Operation Instruction Picture is for reference only, and the productis subject to practicality. Would you please to read this specification carefully before installation in order to avoid operating errors or damages. Make sure that the baby will be safe. The user should safekeeping the specification. Specification Car type Storage battery | 12V7AH*1 /12V10AH*1/12V7AH*2 Electric motor | 12V 30W*4(drive) 12V8W7*1(turn) Suit age 37-96 months Max weight | 30kg Size 1135 785 775mm Speed 3.0km/h-5.0km/h Utility 8-12hours(charge), 60minutes-80minutes(use) Charger AC220V50Hz(input), DC12V(output) Battery of Remote control | Two pieces of AAA1.5V 2.Must be charged under Aduis inspection, 3 Baty ples must be connected corey (Re oR, Black Black) 4 Being shot cutis not alowed, Battery using instructions:
1 Pls.use two pieces of 1.5VAA batteries 2.0pen the battery compartment cover and insert twot.5 VAAAbatt Close the cover; Remove the battery in the same way. 3.Must use the rech rgeable battery to charge, Must be charged under Adults inspection. S.Taking out the batteries when charging, 6.Eithercifferent styles of batteries or new and old batteries can't be used together. 7 Battery poles must be connected directly. 8,The expired or used up batteries must be taken out of the car, 9.Being short circuit is not allowed, Maintenance:
.Before the installation make sure the parts are complete. If you have any question, please fee! free to contact us. 2.Make sure every partis complete when installing and using. 3;Please clean the product regularly. Do not damage the electrical equipment, 4-Please check and maintain the car for the childrens safety. 10 Donotdrive the car in the water Do not put the water or liquid on the car Do not drive the car in the room to protect children and furniture. When the battery is in low powerthe car just go forward but not left or right. When it can not go farther or shake you should change the new battery at once. Please tum off the power when the car is not driven. f the car is not driven for a Jong time please plug out the battery connector Kind reminder for charging:
Make sure the battery has been charged over 18hours before the frst use. Connect the charger connector othe battery connectorthen insert the charger onthe plug After using 1 houryou should charge inte it takes 8 to 12 hours o charge normaly Do not charge over 20 hours. is normalto have some heat for chargerand battery when itis charging (aw then 60 C) In order to protect chargerbattery and circuit please use the special charger and battery from our factory. Connecting terminal can not be a short circuit. Do not mix old and new batteries or different types of batteries. Make the battery charge once a month at east when the cars not criven for longtime. Charge the battery by the adult. Chargers and battery maintenance:
4 Taking away the seat fst,and urscrewing the battery coverfinally gt out of or putin he battery.and then screwing the battery coverfinally put the seat as wells screwing the bot. A\ Kind reminder Small parts. Not suitable for children under 36 months!
Products should be adult assembly! Before the assembly screw split pin and other dangerous sharp tip!
Small parts in order to avoid damage and ingestion may cause choking hazard, please send small parts away from children under 3 years old!
The children can not drive alone without adults,and caregivers in use process shall not be allowed to leave!
After charging the storage battery by the adults, before using this product, please recharge!
To prevent harm to children, please keep the packaging materials such as plastic bags away from them. Please check the product regularly to make sure that the electric wire, plugs, outer case and other parts are normal. If something is damaged, please stop using the car until itis fixed!
Two AAA dry cells are for the remote controller!
Use all the cells or batteries in right way!
If the line with no connection Do not insert the output socket!
The packaging and instructions must be retained since it contains important information!
Seat Guide frame Guide frame base Car body Installation Steps:
Adjust the front axle a.After the adjustment, insert a 512MM screw into the hole atthe joint ofthe steering dis and lock it with MS locknut to ensure that the steering joint can rotate easily from let to right. (Referring to Picture 4) 2uInstall the rear axle Place the rear axle components on the car body , make the rear axle symmetrical on both sides.
(Notes:the rear axle total length: 726 mm)
(Referring to Picture 2) 3.Install the front wheel alnstalL drive motor into lef front axe, R rive motor into the right front axelthen install the front wheel into the front axel Put one washer on the outside of the front eel and toh wth one M0 locking ut cPut the wheel cover aim at the wheel and tight with wheel
(Referring to Picture 3) install the rear whee!
alnstal L dive motor nt left ear axel, tive motor into the right rear axel (Notes:
Rear drive motor does nat have motor protection cover) First install the two rear drive wheels on both sides of the rear ae,put one washer on the outside ofthe rear wheel on the let and right nally ight with one M10 locking nut. ccPut the'whee! cover aim at the wheel and tight with whee (Refering to Picture 4) Troubleshooting:
Gear case with ; Bring itt repairin high noise ETD maintenance points The car 1.Bad connection of the | Connect well shakeswhen igo | motor connector wires found 2.Something wrong with | Bring it to repair in the motor maintenance points Drive without | 4.No dry battery inthe | Bring it to repairin music steering whee! maintenance points Ifyou can not solve the problem, please fee to contact us. Kind reminder:
Before the first use, make sure the battery has been charged over 18hours, otherwise it will be damaged forever. Do not drive the car on the slipped street,road,slop and other dangerous places. Do not drive the car on the smooth surface, such as marble and floor tile. The car's just for only one person.Do not be overweight. The maximum load is 30kg Do not transfer the swtch go forward to "go back" during the advance. Do not change the line and charged device model. Keep the remote and remote control car far away from the rain the wet thing and fre, in order thatthe circuit is not damaged When the car meets some obstacle it wll stop. The car wil move again when the obstacle is moved. Fault and Soutions:
S Install the steering wheel Type of fault | Analysis of causes Solutions a Fisly conect the steering wheel wie to dashboard 7 wire Voltage is below normal level | Charge the battery b.Then insert steering wheel into the dashboard hole postion algn the stering rod hole with he steering 2.Satety wire protects Wait fora while whee! hole, insert 536mm bolt and tight with nut 13.The screw on the wheels | Tight the screw again (Referring fo enue) have fel of Can not move Basen coment hes 2} of |Come on ea 6.install the front windshield and trunk floor
. 2 Install the front windshield into the card slot eo petiey ecareued ea of the car body, and then use two M4*12mm,
\6.Electrical equipment is Bring it to repair in sporews to Bot fei Rectencnes pet (Referring Piture6) 17.Motor is damaged Bring it to repair in maintenance points 1.Battery connector have fell _| Plug into again hiatal the seat ae Put the seat backrest into the trunk bottom The battery can . | plate not be charged _|2Battery charger is powe off | Plug into again Then put the seat into the seat backrest,and finally use two 4"12mm screws to tight it
/S.Battery charger is damaged | Change the battery charger (Referring Picture7) Distance per _|1-Battery is not full Change the battery again charge is short i [2.Battery is old Change the battery 8 install the guide base _ First insert the guide base into Some noise and heat, when Hi Chemical reaction Nomal the car bodyihen install the charge the battery] guide base. b Finally use four 4*14mm screws
} Battery is old Change the batter rads aes NP ot) (Referring Picture8) Low speed __|2Batteryis out of power _| Change the battery again 13.0ver weight Lighten the weight o less than 35K
/4.Undulate pavement Smooth path 9.Power connection a.Firstly open the hood ,connect the power plug-in,and turn on the power switch on the dashboard,then power up. aera oar (Referring to Pictures) Follow the picture 410.Charging indication a. When the power display shows less than two, which means the battery is lower power Pls charge the battery . bn the charging mode ,the cars inthe charging protection device.The car won't be start. Ifthe charger is removed from the charging socket, the car becomes normal mode. 11.Dashboard indication a. Power key Switch -(1)Tur on power key switch ,the light will be bright and there is engine sound.
(2)Dashboard equipped with music function and it can connected cellphone adjust the volume power display etc. b. Steering wheel The steering wheel equipped with music and horn, Children can adjust by themselves,
.Double drive/Four drive coversion switch--_(1) Can switch double drivelfour drive mode, four drive mode has strong power (2)This car has RC priority function. 4.Switch of lighting system-- (1) Lights can be turned on and off e.High-low speed switch - When manual for driving, Children can adjust the speed by themself,
{Go forward! Stop/ Back forward switch-When manual for driving , children can control to-go forward or backward when they step on the foot pedal.
(Referring to Picture10) Follow the picture 12.2.4G Remote control instructions:
For the first time need to code ,this product has a momory function ,replacement battery next time ,you don not need to match the code once again. 1. Long pressMbutton more than three seconds,unti the first LED lights flashing. 2.Open body power ,first a long bright LED turns on the success of the code. 3.Remote control 10 seconds without operating automatic standby ,pressany key to wake up. 4.Key Description:" A "Forward, "V"Back, <Left "D>Right, "SSpeed, PStop 5.Press the "S" key to set the speed, a light is low, two lights for medium-speed, three lights for high-speed,the car back with only medium-speed Press the "P" key to keep the brakes, the indicator full lash, press the brake button again to lit the brake, Note: the remote control should be used by adult, and children dont touch. 13.The car can be installed portable dragged structure a.The car can be installed portable dragged structure