FCC ID: 2AJ2H-TX101120 Remote control

Product model: TX10 Product name: 2.4G remote control FCC ID:2AJ2H-TX101120 User Manual Product introduction Remote control frequency: 2.405 GHz to 2.479 GHz, can at least 20 sets of equipment use at the same time without interference;

Remote control distance: clearing not less than 30 meters;

The frequency steps:

1, open the power switch of the car; 15 seconds, the car is waiting for matching code; 2, at the same time press the TX remote hand switch M keys after 2 seconds, the LED flashing, the TX hand remote control switch to the state of matching code;

3, When LED change flashing into long bright, matching frequency is success; After 5 seconds, if the frequency is not successful, hand switch back to the original state or the last time of frequency state;

4, If open the power switch the car for more than 15 seconds, then the car back to working status, if you need again to matching the frequency, you will need to repeat step 1 ~ 3;

Product model: TX10 Product name: 2.4G remote control FCC ID:2AJ2H-TX101120 Tx hand remote control button:

The detailed function 1, AAA 1.5* 2 3 VDC power supply; Need matching transmitter and receiver frequency when used for the first time to work;

2, Seven key functions of the control panel diagram below:

: after press, control the car forward, loosen the stop;

: after press, control the car back, loosen the stop;

: press this button or click, the car turn to the left, long press this button to the motor work at most 2 seconds after stopping;

: press this button or click, the car to the right, long press this button to the motor work at most 2 seconds after stopping;

Matching code: press the M keys at the same time after 2 seconds into the matching code state;

P: emergency brake, press it and the running function will fail, press again, it release S: Choose speed , high-middle-low speed 3, if without any operation and buttons for 10 seconds, the LED goes out, hand button automatically enter standby power saving status, once again, press the next button to return to work after;

Product model: TX10 Product name: 2.4G remote control FCC ID:2AJ2H-TX101120 FCC warning statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation. equipment. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Product model: TX11 Product name: 2.4G remote control FCC ID:2AJ2H-TX101120 User Manual Product introduction Remote control frequency: 2.405 GHz to 2.479 GHz, can at least 20 sets of equipment use at the same time without interference;

Remote control distance: clearing not less than 30 meters;

Product model: TX11 Product name: 2.4G remote control FCC ID:2AJ2H-TX101120 Tx hand remote control button:

The detailed function 1, AAA 1.5* 2 3 VDC power supply; Need matching transmitter and receiver frequency when used for the first time to work;

2, Seven key functions of the control panel diagram below:

: after press, control the car forward, loosen the stop;

: after press, control the car back, loosen the stop;

: press this button or click, the car turn to the left, long press this button to the motor work at most 2 seconds after stopping;

: press this button or click, the car to the right, long press this button to the motor work at most 2 seconds after stopping;

3, if without any operation and buttons for 10 seconds, the LED goes out, hand button automatically enter standby power saving status, once again, press the next button to return to work after;

Product model: TX11 Product name: 2.4G remote control FCC ID:2AJ2H-TX101120 FCC warning statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Product model: TX12 Product name: 2.4G remote control FCC ID:2AJ2H-TX101120 User Manual Product introduction Remote control frequency: 2.405 GHz to 2.479 GHz, can at least 20 sets of equipment use at the same time without interference;

Remote control distance: clearing not less than 30 meters;

Product model: TX12 Product name: 2.4G remote control FCC ID:2AJ2H-TX101120 Tx hand remote control button:

The detailed function 1, AAA 1.5* 2 3 VDC power supply; Need matching transmitter and receiver frequency when used for the first time to work;

2, Seven key functions of the control panel diagram below:

: after press, control the car forward, loosen the stop;

: after press, control the car back, loosen the stop;

: press this button or click, the car turn to the left, long press this button to the motor work at most 2 seconds after stopping;

: press this button or click, the car to the right, long press this button to the motor work at most 2 seconds after stopping;

P: emergency brake, press it and the running function will fail, press again, it release S: Choose speed , high-middle-low speed 3, if without any operation and buttons for 10 seconds, the LED goes out, hand button automatically enter standby power saving status, once again, press the next button to return to work after;

Product model: TX12 Product name: 2.4G remote control FCC ID:2AJ2H-TX101120 FCC warning statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Product model: TX20 Product name: 2.4G remote control FCC ID:2AJ2H-TX101120 User Manual Product introduction Remote control frequency: 2.405 GHz to 2.479 GHz, can at least 20 sets of equipment use at the same time without interference;

Remote control distance: clearing not less than 30 meters;

The frequency steps:

1, open the power switch of the car; 15 seconds, the car is waiting for matching code; 2, at the same time press the TX remote hand switch M keys after 2 seconds, the LED flashing, the TX hand remote control switch to the state of matching code;

3, When LED change flashing into long bright, matching frequency is success; After 5 seconds, if the frequency is not successful, hand switch back to the original state or the last time of frequency state;

4, If open the power switch the car for more than 15 seconds, then the car back to working status, if you need again to matching the frequency, you will need to repeat step 1 ~ 3;

Product model: TX20 Product name: 2.4G remote control FCC ID:2AJ2H-TX101120 Tx hand remote control button:

The detailed function 1, AAA 1.5* 2 3 VDC power supply; Need matching transmitter and receiver frequency when used for the first time to work;

2, Seven key functions of the control panel diagram below:

: after press, control the car forward, loosen the stop;

: after press, control the car back, loosen the stop;

: press this button or click, the car turn to the left, long press this button to the motor work at most 2 seconds after stopping;

: press this button or click, the car to the right, long press this button to the motor work at most 2 seconds after stopping;

Matching code: press the M keys at the same time after 2 seconds into the matching code state;

P: emergency brake, press it and the running function will fail, press again, it release S: Choose speed , high-middle-low speed 3, if without any operation and buttons for 10 seconds, the LED goes out, hand button automatically enter standby power saving status, once again, press the next button to return to work after;

Product model: TX20 Product name: 2.4G remote control FCC ID:2AJ2H-TX101120 FCC warning statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

PINGHU WELLYE ELECTRICAL CO., LTD. Authority to Act as Agent Date: Aug 29, 2020 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

_____Intertek Testing Service Shanghai______ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: _____Dec 31, 2021 By:

Title:

On behalf of: __ PINGHU WELLYE ELECTRICAL CO., LTD.________________ Telephone:

_____ YAOBIAOJUN____________

(Print name) __________________________ ______General Manager____________________ _____ 0573-85636121 ___________________

(Company Name)

(Signature1) 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

PINGHU WELLYE ELECTRICAL CO., LTD. Request for Confidentiality Date: Aug 29, 2020 Subject: Confidentiality Request for: __FCC ID: 2AJ2H-TX101120 Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 9.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent *1 Permanent Permanent Permanent Permanent Permanent *3 Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual ______ PINGHU WELLYE ELECTRICAL CO., LTD. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180)2___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By:

______ YAOBIAOJUN __________________ __________________________

(Signature/Title3)

(Print name) 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Declaration We, Name: PINGHU WELLYE ELECTRICAL CO., LTD. Address: NO.8 Jinhui Road, Xingcang Town, Pinghu City, Zhejiang, China. declare that TX10, TX11, TX12 and TX20 have the same PCB and RF circuit. The difference is 1) buttons. 2) Declared by: PINGHU WELLYE ELECTRICAL CO., LTD. Name: YAOBIAOJUN Signature:

the appearance. TX10 and TX20 use 7 buttons, TX12 uses 6 buttons, TX11 uses 4 Date:2020-08-29