FCC ID: 2AX5C-JC111B Ride on car

Instruction Manual Ride on SUV w/ DIY License Plate (12V) (Fun Letters) Item number: 060-ROT-10 JC111B

*Product appearance and colors may vary from the photo. ATTENTION This vehicle is packed with the battery disconnected. Connect the battery before use. This manual contains important safety, performance and maintenance information. Read the manual thoroughly before allowing your child to ride your new electric ride-on toy. Failure to read the user manual can result in property damage or bodily injuries. Keep this user manual for future reference. When using electrical product, basic safety precaution should always be followed including the following:

Safety Instruction Read all Instruction before operating this product WARNING:

To Protect against electrical shock, do not immerse cord, charger, transformer, battery, or the product in water or other liquid. Only use charging devices, transformer, and battery provided or recommended by the manufacturer. For your childrens safety, the product should be assembled by adult. Close and constant adult supervision is required when your child is operating this product. Disconnect the battery if not used for a long time. To reduce the risk of injury, adult supervision is required. Never use in roadways, near motor vehicles, on or near steep inclines or steps, swimming pools or other bodies of water; always wear shoes, and never allow more than 1 rider. RISK OF FIRE. Do not bypass fuse. Replace only with original size and type. Do not use this product on slippery surface. Always drive the vehicle on smooth surface, and do not drive the vehicle on the tall grass or rugged ground. Rider should always wear shoes when riding on this product. Always keep hands, hair, clothing, and loose items away from moving parts. Maximum users weight for this product is 66 lb / 30 kg. This product is suitable for children age 37 - 95 months old. Do not change, modify or add any electrical wiring on this product. Avoid using this product in tight environment to prevent damage to the product Do not use this product in the dark. Only operate this product during daytime or For your child 's safety, please make sure the seatbelt is securely fastened when or injury to the user. well-lit area. operating this product. Personal protective equipment such as helmet is needed when using this product. 1 WARNING:

PREVENT FIRE in serious injury. only. case only. WARNING:

WARNING:

injury and could also ruin the electrical system. The battery must be handled by adults only. The battery is heavy and contains sulfuric acid(electrolyte). Dropping the battery could result in serious injury. Never allow children to charge the battery. Battery charging must be done by adults Never lift or carry the battery by the wires or connector. This can damage the battery Examine the battery, charger and their connectors for excessive wear or damage each time you charge the battery. If damage or excessive wear is detected, do not use the charger or the battery until you have replaced the worn or damaged part. Avoid continuously hitting into obstacle to prevent overheating or damaging the motor. Drive away or remove obstacle as soon as possible. Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, unapproved WARNING:

CHOKING HAZARD - Small parts. Not for children under 3 years. This toy is to be assembled by an adult. Contains WARNING:

llams sniatnoc ro ,stniop prahs dna segde prahs suodrazah yllaitnetop parts before assembly. WARNING:

Do not drive this vehicle into any puddle or contact with any liquids to avoid the electrical shock to product or user. 2 WARNING FAILURE TO FOLLOW THE SAFETY INSTRUCTIONS LISTED BELOW MAY RESULT IN SERIOUS INJURY OR DEATH. The owners manual contains assembly, use and maintenance instructions. Child Safety Warnings Adults supervising children must read and understand this entire manual before allowing any child to use this product. Adults must evaluate their own children as to maturity, strength, judgment and ability to follow safety rules. Published age guidelines are not a substitute for careful evaluation of your own child. Adults must teach children about thinking ahead while riding as this may be the see through the childs eyes, and verbally teach them about steering and avoiding obstacles in the approved riding area. Riding a motorized ride-on toy can be a dangerous activity, even under the best of circumstances. Good choices regarding where and when to ride, constant adult supervision of riding, and practice and careful riding by the child can all help to minimize risk. However this ride-on toy is intended to move and therefore it is that no amount of care, instruction or expertise can eliminate. If this inherent risk is not acceptable, adults should not allow children to ride this ride-on toy. WARNING Safe Riding Warnings Not to be used by children under 36 months or children over 96 months.. Do not exceed the maximum weight capacity of 66 lb (30 kg). Do not allow more than one (1) rider. ADULTS AND SUPERVISORS, PLEASE NOTE:

1 Always instruct all children of common sense rules and safe practices. 3 Do not allow the child rider to operate the ride-on toy near streets, roads, sidewalks, walkways, or any other place where they may encounter other moving vehicles. 4 Never leave children unattended with this ride-on toy. Continuous adult supervision is required. 3 WARNING 5 If necessary, adults and supervisors are always responsible for setting up gates and barriers to ensure a safe riding environment for the child rider. 6 Be aware that this ride-on toy does not have braking capabilities. Allowing use of this ride-on toy in areas that require braking may cause rolls, crashes, serious injury, or death to the child rider. 7 Teach children not to allow other children to use this ride-on toy. Communicate this message to other adults and supervisors of fellow children with which your child interacts. 8 Sternly alert children that hands, legs, hair, and clothing can potentially get caught in moving parts. Ensure they never place a body part or piece of clothing near a moving part of the ride-on toy. Avoid loose clothing. 9 Instruct children to always wear shoes when using the ride-on toy. into contact with any part of the ride-on toy while it is charging. 11 Do not mix old and new batteries. 12. Do not mix alkaline, standard (carbon zinc), or rechargeable batteries. 13. Firmly instruct children to use the ride-on toy in a safe manner. Unsafe behaviors include, but are not limited to:

Traveling at unsafe speeds Not riding in the seated position Riding at night or in any conditions of low visibility Riding in any wet conditions including rain, snow, and ice Any kind of stunt riding: jumps, ramps, stairs, hills, sloped surfaces, or other actions involving any notable risk that involve notable risk Riding near any pool or open body of water Pushing, pulling, or shoving the driver in any way while operating the ride-on Using the ride-on toy without the battery cover or any other safety cover fully Pulling or hitching the ride-on toy with other similar moving ride-on toys or toy closed products 4 WARNING Battery and Charging Warnings The following safety hazards may result in serious injury or death to the user of the ride-on:

Do not mix old and new batteries. seirettab elbaegrahcer ro ,)cniz-nobrac( dradnats ,enilakla xim ton oD Corrosive Material Warnings Battery posts, terminals and related accessories contain lead and lead compounds (acids) chemicals and are toxic and corrosive. Never open the battery. Contact or exposure to battery leakage (lead acid) may cause serious injury. If contact or exposure occurs with the skin or in the eyes, or if the chemical is swallowed, immediately call 911. Flammable and Explosive Materials Warnings Use of a battery or charger other than the supplied rechargeable battery and battery and charger with the ride-on toy. Using the rechargeable battery and charger for any other product many and charger with another product. explosion. Avoid direct contact between the terminals. Lifting the battery by the wires or charger can cause damage to the battery and may result in a Plug wall charger directly into a wall outlet. Do not use an extension cord Electric Shock / Fire Warnings liquids away from the battery and keep the battery dry. or explosion and permanently damage the system. Exposed wiring, circuitry in the charger may cause electric shock. Always keep the charger housing closed. 5 Regularly check charger, supply cord and connector for wear and damage. Look for frayed or kinked wires, any exposed inner wires, any missing insulation. If any damage is observed do not plug in the charger and do not charge the battery. WARNING CAUTION Re-Charge Interval and Time Important!

Damage to the battery may occur if it is allowed to drain completely. Do not allow the battery to drain completely. Check the battery and charger (supply cord, connector) for wear and damage before charging. Do not charge the battery if damage has occurred. Do not use an extension cord when charging the ride-on toy. On average you will need to charge the battery for 8-12 hours and no more than 20 hours. Failure to charge the battery as directed could cause permanent damage to the battery and void the warranty. Only an adult who has read and understands the safety warnings should handle, charge and recharge the battery. WARNING Product Warning WARNING:

This product can expose you to chemicals, including Lead, which is known to the State of California to cause birth defects and or other reproductive harm, and Di (2-ethylhexyl) phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. Assembly Warnings The ride-on toy must be assembled by an adult who has read and understands the instructions in this manual. Choking hazard to children under the age of 3 years. This ride-on toy contains small parts that are for adult assembly only. Keep small children away when assembling. Remove and dispose of all protective materials, plastic bags and packaging before assembly. 6 Model No.: 060-ROT-10 Battery: 12V 4.5AH x 1 Charger input: 100 - 240V AC Charger output: 12V 500mA Speed: 1.86 - 3.1 mph (3 - 5 km/h) Suitable Age: 37 - 95 months Maximum User Weight: 66 lb / 30 kg Dimension: 39.4 x 25.6 x 28.4 (100 x 65 x 72 cm) Battery Charge Time: 8 - 12 hours Operation Time: 40-60 Minutes 7 Parts and Feature A. Car Body 1x B. Windshield 1x C. Steering Wheel 1x D. Wheel 4x E. Small Wheel Cover 4x F. Rear Spring Holder G. Rearview Mirror Holder 2x 2x H. Rearview Mirror 2x I. Door 2x J. Motor 2x K. Search Light Holder 2x L. Search Light 1x M. Front Spring 2x N. Rear Axle 1x O. Front Axle

x 8 Parts and Feature P. Seat 1x Q. Spanner 2x R. M4 x 14 Screw 14x S. Nut 7x

( 2pcs pre-installed on the front axle) T. Remote Control 1x U. Charger 1x V. Flat Iron 1x W. Big Washer 2x

(For front axle inner side) X . Small Washer 7x Y. MP3 Cable 1x

( 2pcs pre-installed on the front axle) Tool Required:

Screwdriver

(Not included) Q. Spanner 2x 9 Assembly Instruction (The following diagrams for reference only, the photos may vary from actual product.) Attach the Flat Iron as arrow. then turn the whole front axle assembly upside down

( V ) Flat Iron

(Q) Front Axle

(S) Nut

(X) Small Washer

(S) Nut

(M) Front Spring

(X) Small Washer Assemble the Flat Iron (V ) to the Front Axle(Q) Insert Front Spring (M) on the square tube, then insert the Front Axle (Q) assembly to the hole on the side of the square tube. Assemble the tie rod of the Front Axle to the Steering rod and tighten with Small Washer (X) and Nut (S). Then secure the front axle assembly on the square tube with Small Washer(X) and Nut(S) ( the small washers and nuts were pre-installed on the front axle). 10 Assembly Instruction Front wheel assembly:

(D) Wheel

(X) Small Washer

(S) Nut

(E) Small Wheel Cover Parts and Feature Tool required:

(W) Big Washer P. Seat 1x Q. Spanner 2x R. M4 x 14 Screw 14x Insert a Big Washer (W) to a side of the Front Axle, follow by the Wheel (D), then secure a Small washer (X) and Nut (S) by the spanner. Cover the nut with a Small Wheel Cover (E) Repeat the same st ep on the other side

. T. Remote Control 1x U. Charger 1x

(R) M4 x 14 Screw W. Big Washer 2x

(For front axle inner side)

(F) Rear Spring Holder X. Small Washer 5x Insert 2 Rear Spring Holders ( F) to the car body, and secure using M4 x 14 screws (R). 11 Assembly Instruction

(N) Rear Axle

(J) Motor L R R R L R R

(D) Wheel

(X) Small Washer

(S) Nut Parts and Feature Tool required:

P. Seat 1x Q. Spanner 2x

(E) Small Wheel Cover Insert Rear Axle (N) through the opening hole of the Rear Spring Holders. Insert Motors (J) to each end of the rear axle. (the motor mark with L or R, pls. match to corresponding marking (L/R) on the chassis as above diagram for assemble) T. Remote Control 1x U. Charger Assemble Wheel (D) to the rear axle and secure with a Small Washer (X) and Nut (S). Then cover with 1x Small Wheel Cover (E). Repeat the same step for the another wheel. W. Big Washer 2x

(For front axle inner side) 12 Assembly Instruction

(G) Rearview Mirror Holder

(I) Door

(R) M4 x 14 Screw Insert the Door (I) into the side of the car body. Assemble a Rearview Mirror Holder (G) on the door and car body using M4 x 14 Screws (R). Repeat the same step on the other side.

(C) Steering Wheel

(1)

(2)

(1) Unscrew the screw and nut from the Steering Wheel (C).

(2) Insert the steering wheel to the steering column and secure with the screw and nut. 13 Assembly Instruction

(H) Rearview Mirror

(B) Windshield

(K) Search Light Holder

(L) Search Light R L Insert Windshield (B), Rearview Mirrors (H), Search Light Holder (K), and Search Light (L) to the car body in their corresponding position. The search light holder marked with L / R , please ensure them assemble in correspoinding position

( L to Left side, R to Right side). Connect the electric wires of the motors. Connect the red battery wire to the red terminal. 14 Assembly Instruction

(P) Seat

(R) M4 x 14 Screw

Align and assemble the Seat (P) to the car body and secure using 2 M4 x 14 screws (R). 15 User Instruction (Control Panel) Voltage Display Bluetooth / USB / MP3 Increase Volume/ Next track Button High/low speed Horn Button Forward Button Reverse Button Play / Pause Decrease Volume / Previous Track Button MP3 Port USB Port Charging Port Power / Lamp button Control the vehicle A. Power / Lamp Button Press and hold the button 2-3 seconds to turn ON or OFF the vehicle; Quick press B.High /Low Speed Button Press the button to move the vehicle in high or low speed. C.Horn Button Press the horn button to make a beeping sound. D.Play / Pause Button Press the button to play or pause the music. E. Charging Port Connect the charger to the charging port to recharge the battery F. Decrease Volume / Previous Track Button Press and hold the button to decrease volume; Press once to play the previous track. G.Forward / Reverse Button Press the switch to control the vehicle to move forward / reverse. Do not switch between forward and reverse until the vehicle comes to a complete stop. H. Increase Volume / Next track Button Press and hold the button to increase volume; Press once to play the next track. I.Voltage Display Display the voltage of the battery. J. Mode Button Press to switch between bluetooth / USB / MP3. K. USB Port Connect to USB. L. MP3 Port Connect to MP3. 16 User Instruction (Remote Control) Speed button Stop button Foward Button Reverse Button Right Button Left Button Light Indicator Do not switch between forward and reverse until the vehicle comes to a complete stop. Do not switch between forward and reverse until the vehicle comes to a complete stop. 3. Speed Selection Button Press to switch between low, middle and high speed. The light indicator will indicate the speed as this: one light=low speed, two lights = middle speed, three lights= high speed. Remote Control Buttons 1. Forward Button Press to move the vehicle forward. 2. Reverse Button Press to move the vehicle backward. 4. Stop Button Press to stop the vehicle. 5. Right Button Press to turn the vehicle to the right. 6. Left Button Press to turn the vehicle to the Left. 7. Light Indicator Light indicator will indicate the pairing status between the car and the remote control. It also indicate the speed as this: one light=low speed, two lights = middle speed, three lights= high speed. 17 User Instruction (Remote Control) Using the remote control The remove control should only be used by adult or under adult supervision. ATTENTION:

The remote control will override all control input from the vehicle. Insert / Changing Battery 1. Open the battery cover on the back of the remote control. 2. 3. Put the cover back to the remote control. Insert 2 x AAA 1.5V batteries in the correct polarity. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries. WARNING:

WARNING:

The battery should only be changed by an adult. Pairing the remote control to the vehicle 1. 2. Then turn on the vehicle power. 3. The indicator light should stay on after successful pairing. 18 User Instruction (Charging) WARNING:

The battery should only be charged by an adult. Charging the battery 1. Locate the charging port on the control panel. 2. Connect the charger to the charging port. 3. Plug the charger into a wall outlet. The battery will start charging. 4. The indicator on the charger will red during charging, and turn to green after charging completed. 5. Battery Charge Time: 8 - 12 hours. Do not charge the battery for more than 20 hours. The vehicle must be OFF when charging. Recharge the battery if the vehicle operates slowly. The vehicle has equipped with charging protection. All function of the vehicle will not be operational when charging. The chargeable battery is not replaceable. NOTE:

Damage to the battery may occur if it is completely drained. Charge the battery at least once a month even if not operating the vehicle to maximize the battery life. 19 Care and Maintenance Check the product regularly and make sure there is no missing or loose parts. Re-tighten any loose parts if necessary. Keep away the product from heat and humid area, cover it with trap when not in use. Make sure there is no cracked or broken plastic parts. Clean the vehicle with a cloth. Use a non-wax furniture polish to restore the shininess of the plastic parts. Do not use abrasive cleaner. Do not wash the product with a hose or immerse any parts in water or other liquid. Occasionally use lightweight oil to lubricate moving parts. Troubleshooting Problem Possible Reason Solution Vehicle does not move Disconnected / Badly connected battery Vehicle does not run very long Vehicle runs very slow Low Battery Fully charge the battery Fuse Protection Motor current cuts off if overloaded or operated incorrectly. Wait for 7 - 10 seconds to reactivate the vehicle automatically. Reconnect the battery Failed battery / engine Contact Customer Service Low Battery Fully charge the battery Old Battery Replace battery if necessary Low Battery Fully charge the battery Old Battery Replace battery if necessary Vehicle is overloaded Make sure users weight is under 66 lb / 30 kg Vehicle is being used in harsh environment Avoid using the vehicle in harsh environment 20 Troubleshooting Problem Possible Reason Solution Vehicle needs a push to go forward Poor wire connection Check if the battery connectors Contact Customer service if necessary Dead spot on motor Contact customer service Loud grinding sound or clicking sound from the motor or gear box Damaged motor or gear box Contact customer service Disconnected / Badly connected battery Reconnect the battery Battery does not charge Disconnected / Badly connected charger plugged into the power source and connected to the charging port Charger not working Contact customer service Vehicle does not stop Damaged equipment Contact customer service Charger becomes warm during charging Normal N/A 21 Model: JC111B, 060-ROT-10 FCC ID: 2AX5C-JC111B This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC rules. This limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. the user is encouraged to try to correct the interference by one or more of the following measures:

Consult the dealer or an experienced radio /TV technical for help. void the users authority to operate the equipment. This Product conforms to toy safety standards CPSIA and ASTM-F963. Importer: ONE BIG OUTLET Importer Address: 19301 E Walnut Dr. N., City of Industry CA 91745 United States Importer Tel: 1-800-946-6151 22 Limited Term Warranty (One Year from Date of Purchase) WARRANTY TERMS ADDITIONAL CONDITIONS KIDZONE warrants that its merchandise are free from manufacturing defects (workmanship and/

or material) and will either give credit or replace defective parts for a period of up to one (1) year from the date of purchase in accordance with the conditions set forth below. If a manufacturing defect the defect and supplied a copy of the invoice and delivery ticket. Inspection by a KIDZONE employee or representative may be necessary to verify that a manufacturing defect exists, or you may be required to submit samples to KIDZONE along with a digital image of the defects. If replacement is required in accordance with this warranty and the defective material or merchandise has been discontinued or unavailable, KIDZONE reserves the right to select and supply similar merchandise the same material or merchandise will be supplied for replacement purposes. This warranty is made solely to the retailer and is not transferable under any circumstances. It is the retailers responsibility to contact KIDZONE with a claim. We will not handle claims from consumers directly; all requests must go through the retailer who sold the merchandise to the consumer. We advise all retailers to retain invoices for a minimum of one

(1) year for warranty purposes. This warranty supersedes and replaces all implied warranties of merchantability and use for particular purpose. No representative, employee, agent or any other person is authorized to assume for KIDZONE any additional liability or responsibility in connection with KIDZONEs merchandise except as described above. Implied warranties or merchantability period of one (1) year from the date of purchase. In no event shall KIDZONE be liable for indirect, consequential or incidental damages of any kind. THE FOLLOWING EXAMPLES ARE NOT MANUFACTURERS DEFECTS:

Colors may vary slightly from the photo because of photography and printing tolerances. Sizes stated in U.S. standard measurements may vary slightly due to product are manufactured using the metric system. No returns for buyers remorse. No returns - other than stated above will be accepted. ADDITIONAL CONDITIONS WARRANT IS VOID FOR ANY OF THE FOLLOWING CONDITIONS:

1. Improper maintenance or improper use resulting in damage. 2. consumer, or other parties not authorized by KIDZONE will void this warranty. 3. Floor samples sold or products designated AS IS at the time of purchase are not covered by the warranty 4. Warranty does not cover minor variations or illustrations and your product. 5. Cost of packaging and shipping to and from KIDZONE is not covered by the warranty unless expressly arranged by KIDZONE. 6. This warranty covers only articles of appliances intended for residential use only, does not cover any industrial, commercial, institutional or Rental use. 7. Dissatisfaction due to buyers remorse. 8. Normal wear and tear. 9. Damages incurred during transportation. 10. Damages incurred during assembling or maintenance. 11. Damage incurred by accidents or abuse. V2-2022-03-03 23

Label Ride on car Model name: JC111B FCC ID: 2AX5C-JC111B This device complies with part 15 of the FCC Rules. 30mm Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 80mm Ride on car Model name: 060-ROT-10 FCC ID: 2AX5C-JC111B This device complies with part 15 of the FCC Rules. 30mm Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 80mm

Pinghu XH Children Products Co., Ltd Agent Authorization Company: Pinghu XH Children Products Co., Ltd Address: No. 186 Tongche Road, Pinghu City, Zhejiang Province, China Product Name: Ride on car Model Number(s): JC111B, 060-ROT-10 Product Description: Children's car We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Jiankuai Li Title:

PM Company: Shenzhen STS Test Services Co., Ltd. Date: 2022.06.13

2022.04.02 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:

We, the undersigned, hereby authorize SHENZHEN STS TEST SERVICES CO.,LTD./A 1/F, Building B, Zhuoke Science Park, No.190 Chongqing Road, HepingShequ, Fuyong Sub-District,Baoan District, Shenzhen, Guang Dong, China/Jiankuai Li(Name of Agent company name and address, Name of Agent) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. Name: Jiankuai Li Title: PM E-mail:Jiankuai.li@stsapp.com This appointment is valid until further until April 01, 2023 Sincerely, Name: Yang dan Title: Manager E-mail: danyangxhtoys@163.com Company: Pinghu XH Children Products Co., Ltd Signature: Yang dan

Differences Description We Pinghu XH Children Products Co., Ltd state:

Product Ride on car Model Name JC111B, 060-ROT-10 Brand Name N/A FCC ID 2AX5C-JC111B Above models have the same circuit schematic, construction, PCB Lavout and critical components. Only the appearance color is different Signature:

Name:

Jiankuai Li Title:

PM Company: Shenzhen STS Test Services Co., Ltd. Date: 2022.06.13

Pinghu XH Children Products Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022.06.06 Subject; Request for Confidentiality FCC ID: 2AX5C-JC111B To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Jiankuai Li Title: PM