all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
user manual | Users Manual | 3.73 MiB | ||||
1 | Attestation Statements | |||||||
1 | Cover Letter(s) | |||||||
1 |
|
MPE | RF Exposure Info | 76.94 KiB | ||||
1 |
|
Setup Photo | Test Setup Photos | 318.52 KiB | ||||
1 | Cover Letter(s) | |||||||
1 |
|
external Photo | External Photos | 521.45 KiB | ||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Operational Description | |||||||
1 | Test Report |
1 | user manual | Users Manual | 3.73 MiB |
FRONT SURROUND SYSTEM SYSTEME SURROUND FRONTAL HTP-SB300 Register your product at:
http://www.pioneerelectronics.com (US) http://www.pioneerelectronics.ca (Canada) Protect your new investment The details of your purchase will be on file for reference in the event of an insurance claim such as loss or theft. Receive free tips, updates and service bulletins on your new product Improve product development Your input helps us continue to design products that meet your needs. Receive a free Pioneer newsletter Registered customers can opt in to receive a monthly newsletter. http://www.pioneerelectronics.com (US) http://www.pioneerelectronics.ca (Canada) Operating Instructions Mode demploi
IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. D3-4-2-1-1_A1_En IMPORTANT NOTICE THE SERIAL NUMBER FOR THIS EQUIPMENT IS LOCATED IN THE REAR. PLEASE WRITE THIS SERIAL NUMBER ON YOUR ENCLOSED WARRANTY CARD AND KEEP IN A SECURE AREA. THIS IS FOR YOUR SECURITY. D1-4-2-6-1*_A1_En NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. D8-10-1-2_A1_En FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party Name: PIONEER ELECTRONICS (USA), INC. Product Name: FRONT SURROUND SYSTEM Model Number: HTP-SB300 Address: 1925 E. DOMINGUEZ ST. LONG BEACH, CA 90810-1003, U.S.A. URL: http://www.pioneerelectronics.com SERVICE SUPPORT DIVISION Phone: 1-800-421-1404 Information to User Alterations or modifications carried out without appropriate authorization may invalidate the users right to operate the equipment. D8-10-2_A1_En This Class B digital apparatus complies with Canadian ICES-003. D8-10-1-3_A1_En This product is for general household purposes. Any failure due to use for other than household purposes
(such as long-term use for business purposes in a restaurant or use in a car or ship) and which requires repair will be charged for even during the warranty period. K041_A1_En D8-10-4*_B1_En WARNING: Handling the cord on this product or cords associated with accessories sold with the product will expose you to chemicals listed on proposition 65 known to the State of California and other governmental entities to cause cancer and birth defect or other reproductive harm. Wash hands after handling D36-P4_A_En CAUTION This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections. D8-10-3a_A1_En
11) 12) Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) 14) Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. P1-4-2-2_En If the AC plug of this unit does not match the AC outlet you want to use, the plug must be removed and appropriate one fitted. Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. If connected to an AC outlet, the cut-off plug can cause severe electrical shock. Make sure it is properly disposed of after removal. The equipment should be disconnected by removing the mains plug from the wall socket when left unused for a long period of time (for example, when on vacation). D3-4-2-2-1a_A1_En CAUTION The STANDBY/ON switch on this unit will not completely shut off all power from the AC outlet. Since the power cord serves as the main disconnect device for the unit, you will need to unplug it from the AC outlet to shut down all power. Therefore, make sure the unit has been installed so that the power cord can be easily unplugged from the AC outlet in case of an accident. To avoid fire hazard, the power cord should also be unplugged from the AC outlet when left unused for a long period of time (for example, when on vacation). D3-4-2-2-2a*_A1_En WARNING To prevent a fire hazard, do not place any naked flame sources (such as a lighted candle) on the equipment. D3-4-2-1-7a_A1_En 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. WARNING This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture. D3-4-2-1-3_A1_En WARNING Before plugging in for the first time, read the following section carefully. The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e.g., 230 V or 120 V) written on the rear panel. D3-4-2-1-4*_A1_En Operating Environment Operating environment temperature and humidity:
+5 C to +35 C (+41 F to +95 F); less than 85 %RH
(cooling vents not blocked) Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light) D3-4-2-1-7c*_A1_En VENTILATION CAUTION When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation
(at least 10 cm at top, 10 cm at rear, and 10 cm at each side). WARNING Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product, and to protect it from overheating. To prevent fire hazard, the openings should never be blocked or covered with items (such as newspapers, table-cloths, curtains) or by operating the equipment on thick carpet or a bed. D3-4-2-1-7b*_A1_En
Selecting fine audio equipment such as the unit youve just purchased is only the start of your musical enjoyment. Now its time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Associations Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion-and, most importantly, without affecting your sensitive hearing. Sound can be deceiving. Over time your hearing comfort level adapts to higher volumes of sound. So what sounds normal can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts. To establish a safe level:
Start your volume control at a low setting. Slowly increase the sound until you can hear it comfortably and clearly, and without distortion. Once you have established a comfortable sound level:
Set the dial and leave it there. Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you listening for a lifetime. POWER-CORD CAUTION Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest PIONEER authorized service center or your dealer for a replacement. S002*_A1_En This product contains mercury. Disposal of this material may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronics Industries Alliance : www.eiae.org. K057_En We Want You Listening For A Lifetime Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing damage from loud noise is often undetectable until it is too late, this manufacturer and the Electronic Industries Associations Consumer Electronics Group recommend you avoid prolonged exposure to excessive noise. This list of sound levels is included for your protection. Decibel Level Example Living room, refrigerator, bedroom away from traffic Light traffic, normal conversation, quiet office 30 Quiet library, soft whispers 40 50 60 Air conditioner at 20 feet, sewing machine 70 Vacuum cleaner, hair dryer, noisy restaurant 80 Average city traffic, garbage disposals, alarm clock at two feet. THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE 90 Subway, motorcycle, truck traffic, lawn mower 100 Garbage truck, chain saw, pneumatic drill 120 Rock band concert in front of speakers, thunderclap 140 Gunshot blast, jet plane 180 Rocket launching pad Information courtesy of the Deafness Research Foundation. S001_A1_En
(Symbol examples for batteries) These symbols are only valid in the European Union. Pb K058c_A1_En Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #s: 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535; 7,003,467;
7,212,872 & other U.S. and worldwide patents issued & pending. DTS, DTS Digital Surround, ES, and Neo:6 are registered trademarks and the DTS logos, Symbol and DTS 96/24 are trademarks of DTS, Inc. 1996-2008 DTS, Inc. All Rights Reserved.
Thank you for buying this Pioneer product. Please read through these operating instructions so that you will know how to operate your model properly. After you have finished reading the instructions, put them in a safe place for future reference. Contents Setup Guide Whats in the box . 6 Installation . 6 Connection . 7 Basic operation . 7 01 Installation Before you start . 8 Pairing main unit and subwoofer. 8 Concerning the placement of this system . 9 Preparing the subwoofer . 10 Wall mounting the main unit . 10 Additional notes on the system placement . 11 02 Connecting up Making cable connections . 12 HDMI cables . 12 Digital audio cables . 13 Connect your TV (For TV audio) . 13 Connecting your TV and playback components. 14 Connecting using HDMI . 14 Connecting your component with no HDMI terminal. 14 Plugging in the system. 15 03 Controls and displays Front panel. 16 Display. 16 Subwoofer . 17 Remote control . 18 Putting the batteries in the remote control . 20 Using the remote control . 20 04 Listening to your system Basic operation . 21 Auto playback . 21 Listening in surround sound . 22 Using the Advanced surround effects . 22 Listening in stereo . 22 Using Front Stage Surround Advance . 23 Using Stream Direct . 23 Setting the Audio options . 24 05 Controlling the rest of your system Setting the remote to control other components . 27 Select preset codes for TVs . 27 Select preset codes for other components . 28 Clearing all the remote control settings. 28 Controls for TVs . 29 Controls for other components . 30 Preset Code List . 31 06 Additional information Troubleshooting. 34 HDMI . 35 Important information regarding the HDMI connection . 36 Precautions when using a wireless subwoofer . 37 Precautions regarding wavelength . 37 Usable range. 38 Signal reflection . 38 For safe use. 38 Resetting the main unit . 39 Specifications . 39 Main unit. 39 Wireless subwoofer. 39 Cleaning the unit . 40 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 5 En
Setup Guide Whats in the box Please confirm that the following items are all supplied. Main unit HTP-SB300SB AC adapter Power cord
(for subwoofer) x1 Power cord
(for AC adapter) x1 Wireless subwoofer HTP-SB300SW SYSTEM SYSTEM INPUT SOURCE Dry cell batteries
(AAA size IEC R03) x2 Brackets
(for main unit) x2 Wall mounting template Operating instructions
(This document) INPUT HDMI1 HDMI2 TV CONTROL OPTICAL COAXIAL INPUT CH STANDARD ADV SURR TV CODE AUTO/
DIRECT STEREO/
A.L.C. DIMMER VOL LISTENING MODE BD MENU ENTER MUTE DISPLAY CH CH ENTER Non-skid pads
(for subwoofer) x4 10 Commercially available SURROUND SYSTEM Remote control Installation 6 En
Connection OPTICAL AUDIO OUT HDMI IN HDMI OUT DC IN 24V OPTICAL AUDIO HDMI OPTICAL COAXIAL AUDIO IN OUT IN 1 IN 2 SYSTEM SYSTEM INPUT SOURCE INPUT HDMI1 HDMI2 TV CONTROL Red Green Basic operation On ENTER SYSTEM SYSTEM INPUT SOURCE On TV CONTROL HDMI INPUT HDMI1 HDMI2 OPTICAL COAXIAL INPUT CH IN 1 STANDARD ADV SURR TV CODE AUTO/
DIRECT STEREO/
A.L.C. DIMMER VOL LISTENING MODE BD MENU 27 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 7 En
01 Installation Chapter 1 Installation Before you start Before installing the unit and performing connections with other components, confirm that the main unit and subwoofer properly support wireless communication. Place the main unit and subwoofer near together. The power cords are furnished with different connectors for the subwoofer and AC adapter. As shown in the accompanying illustration, confirm the shape of the plug that connects to the AC inlet when making connections. Note that the power cord for the AC adapter is contained in the same box as the AC adapter. Plug the supplied AC adapter into the DC 1 IN socket on the back of the unit. 2 Plug the supplied power cord into the AC adapter then plug the other end into a power outlet. 3 Plug the supplied power cord into the AC IN socket on the back of the subwoofer then plug the other end into a power outlet. 4 Press STANDBY/ON on the main unit. Confirm that the indicators of the main unit and subwoofer both light green. If either of the indicators does not light green, perform pairing (see below). After confirming communication between the two units, unplug the power cords and perform installation and connections. Pairing main unit and subwoofer For subwoofer For AC adapter SYSTEM SYSTEM INPUT SOURCE INPUT HDMI1 HDMI2 TV CONTROL DC IN 24V OPTICAL COAXIAL AUDIO IN OUT Main unit STANDBY/ON INPUT STEREO/A.L.C. OPTICAL COAXIAL INPUT CH ENTER To AC outlet 1 After youve finished making the AC adapter and power cord connections, press STANDBY/ON on the main unit (see above). 2 Press on remote control. 3 While holding the main units STEREO/
A.L.C. button depressed, simultaneously press the remote controls SHIFT and TV CONTROL CH buttons. The indicator of the subwoofer light green, and the pairing of main unit and subwoofer is completed. AC adapter Subwoofer 8 En
Installation Concerning the placement of this system Caution When assembling the system, lay them down flat on their side to avoid accidents or injury. Make sure to use a stable surface when assembling, setting up, and placing the system. This system allows you to enjoy 3.1 channel surround sound merely by installing the main unit and subwoofer. To achieve optimum audio performance, place the main unit beneath the television monitor. The subwoofer receives its audio signals wirelessly from the main unit, so it requires no speaker cables, allowing you to place it in the most convenient location (a power cord connection is required, however). Main unit HTP-SB300SB Subwoofer HTP-SB300SW Important Precautions regarding subwoofer installation:
Do not place objects behind the subwoofer and occlude the ventilation ports. Sound from the subwoofer may be interrupted due to poor signal conditions, but this is not a malfunction. If it occurs, rearrange the position and orientation of the main unit and/or subwoofer as required. The subwoofer is designed to be used within a distance of 10 m (32 ft.) from the main unit. The actual distance within which it can be used, however, may be less, depending on the environment and design of the room where it is used. Signal reception by the subwoofer may be unstable if it is placed too close to the main unit. In this case, separate the subwoofer at least 1 m (3.2 ft.) from the main unit. Signal reception by the subwoofer may be interrupted if an obstruction (metal door or concrete wall, aluminum covered insulation, etc.) is placed between it and the main unit. In this case, install the subwoofer in an uninterrupted line-of-sight orientation from the main unit. 01 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 9 En
01 Installation Preparing the subwoofer Attach the non-skid pads to the base of subwoofer. Use the supplied adhesive to attach four pads to the base of subwoofer. The subwoofer has been designed for normal use when placed on its side as shown. If installing the subwoofer vertically, affix the non-skid pads to the side of the subwoofer as indicated in the accompanying illustration. For vertical installation Pioneer logo 10 En Wall mounting the main unit The main unit can be mounted on a wall if desired. Before performing a wall mounting, consult page 12 and complete the wiring connections. Caution Remember that the main unit is heavy and that its weight could cause the screws to work loose, or the wall material to fail to support it, resulting in the unit falling. Make sure that the wall you intend to mount the unit on is strong enough to support them. Do not mount on plywood or soft surface walls. If you are unsure of the qualities, consult a professional for advice. Pioneer is not responsible for any accidents or damage that result from improper installation, misuse or modification of the product, or natural disasters. Mounting screws and washers are not supplied. Use screws suitable for the wall material and support the weight of the unit. Recommended dimensions are for a screw 4 mm (3/16 in.) in diameter and 50 mm
(1 15/16 in.) long, with a washer 10 mm (3/8 in.) in diameter. Screw (not supplied):
maximum 10 mm
( 3/8 in.) 50 mm
(1 15/16 in.) 4 mm
( 3/16 in.) Washer (not supplied):
10 mm
( 3/8 in.)
Installation Paste the supplied wall mounting 1 template on the area of installation. Attach the template level to the ground using an adhesive such as tape. Make sure the template is straight to avoid mounting the unit crookedly. Pasting the template too close to the TV may cause the TV to get in the way of the unit when installing. Make sure the template and TV do not overlap. Confirm that the screws come fully to the top of the mounting holes. DC IN 24V COAXIAL OPTICAL AUDIO IN HDMI OUT IN 1 IN 2 Additional notes on the system placement Precautions:
When installing the main unit on top of the TV, be sure to secure it with tape or some other suitable means. Otherwise, the main unit may fall from the TV due to external shocks such as earthquakes, endangering those nearby or damaging the main unit. The main unit is magnetically shielded. However, depending on the installation location, color distortion may occur if the main unit is installed extremely close to the screen of a television set. If this case happens, turn the power switch of the television set OFF, and turn it ON after 15 min. to 30 min. If the problem persists, place the main unit away from the television set. The subwoofer is not magnetically shielded and so should not be placed near a TV or monitor. Magnetic storage media (such as floppy discs and tape or video cassettes) should also not be kept close to the subwoofer. Do not attach the subwoofer to a wall or ceiling. They may fall off and cause injury. Template 2 Attach the bracket to the specified location on the template. Align the brackets to the specified locations on the template, and attach with two screws as shown. Adjust the attachment position of the bracket so that it is aligned with the template. After attach the right and left brackets, take down the template. Template Screw and washer
(not supplied) Bracket 3 Hang the main unit on the brackets. Align the two mounting holes on the rear of the main unit with the brackets exposed top mounting screws, and hang the main unit on the screws as shown. 01 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 11 En
02 Connecting up Chapter 2 Connecting up Making cable connections Make sure not to bend the cables over the top of this unit. If this happens, the magnetic field produced by the transformers in this unit may cause a humming noise from the speakers. Caution When connecting this system or changing connections, be sure to switch power off and disconnect the power cord from the wall socket. After completing all connections, connect the power cords to the wall socket. HDMI cables The HDMI cables transfers uncompressed digital video, as well as almost every kind of digital audio that the connected component is compatible with, including DVD-video, DVD-
Audio, Dolby Digital Plus, Dolby TrueHD, DTS-
HD Master Audio (see below for limitations), Video CD/Super VCD, CD, SACD (DSD 2 ch only) and 192 kHz/8 ch (Max. number of channel inputs) PCM.1 Be careful to connect the terminal in the proper direction. About HDMI HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV, set-top boxes, and other AV devices. HDMI was developed to provide the technologies of High Bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface (DVI) in one specification. HDCP is used to protect digital content transmitted and received by DVI-compliant displays. HDMI has the capability to support standard, enhanced, or high-definition video plus standard to multi-channel surround-sound audio. HDMI features include uncompressed digital video, a bandwidth of up to 2.2 gigabytes per second (with HDTV signals), one connector
(instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs. This system is also compatible with the DeepColor and x.v.Color feature (x.v.Color is trademarks of Sony Corporation). HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC. Note 1 Set the HDMI parameter in Setting the Audio options on page 24 to THRU (THROUGH), if you want to hear HDMI audio output from your TV or flat panel TV (no sound will be heard from this system). If the video signal does not appear on your TV or flat panel TV, try adjusting the resolution settings on your component or display. Note that some components (such as video game units) have resolutions that may not be displayed. In this case, use a method other than HDMI to connect your television to the other component. When the video signal from the HDMI is 480i, 480p, 576i or 576p, Multi Ch PCM sound and HD sound cannot be received. 12 En
Connecting up Important Compared to existing digital audio transmission formats (optical and coaxial), HDMI format digital audio transmissions requires a longer time to be recognized. Due to this, interruption in the audio may occur when switching between formats or beginning playback. Additionally, turning on/off the component connected to this units HDMI OUT terminal or disconnecting/connecting the HDMI cable may cause noise or interrupted audio. Connect your TV (For TV audio) This will allow you to play the sound from the TVs built-in tuner. Televisions without digital audio output connectors cannot be connected to this unit. Connect the optical digital output on your TV to the OPTICAL AUDIO IN on this system.2 Use an optical cable. If your TV has a coaxial digital output, you can also use a coaxial digital audio cable for the connection. Digital audio cables Commercially available coaxial digital audio cables or optical cables should be used to connect digital components to this system.1 Coaxial digital audio cable Select one DIGITAL OUT OPTICAL COAXIAL TV Optical cable OPTICAL COAXIAL AUDIO IN OUT Note 1 When connecting optical cables, be careful when inserting the plug not to damage the shutter protecting the optical socket. When storing optical cable, coil loosely. The cable may be damaged if bent around sharp corners. You can also use a standard RCA video cable for coaxial digital connections. 2 When connecting this system to a playback component through a television set, in some cases sound may not be produced from the televisions digital audio output. In this case, connect this system directly to the playback component. 02 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 13 En
02 Connecting up Connecting your TV and playback components Connecting using HDMI If you have an HDMI or DVI (with HDCP) equipped component (Blu-ray disc player, etc.), you can connect it to this system using a commercially available HDMI cable. Connecting your component with no HDMI terminal This diagram shows connections of a TV and DVD player (or other playback component) with no HDMI terminal to the system. HDMI IN HDMI/DVI-compatible TV or flat panel TV TV 2 2 HDMI OUT IN 1 IN 2 1 OPTICAL COAXIAL AUDIO IN OUT 1 Video cable OPTICAL COAXIAL DIGITAL OUT Select one DVD player, etc. HDMI OUT HDMI/DVI-equipped component 1 Connect the HDMI output on your BD/
DVD player to the HDMI IN1 on this system. Use an HDMI cable for the connection. 1 Connect the coaxial digital output from your DVD player to the COAXIAL OPTICAL AUDIO IN on this system. Use a coaxial digital audio cable. If your DVD player has an optical digital output, you can also use an optical digital audio cable for the connection. 2 Connect the HDMI OUT on this system to an HDMI input on your TV. 2 Connect the video output on your DVD player to the video input on your TV. 14 En
Connecting up Plugging in the system Only plug in after you have connected all your components to this system. DC IN 24V OPTICAL COAXIAL AUDIO IN OUT Main unit To AC outlet AC adapter Subwoofer Main unit:
Plug the supplied AC adapter into the DC 1 IN socket on the back of the unit. 2 Plug the supplied power cord into the AC adapter then plug the other end into a power outlet. Subwoofer:
Plug the supplied power cord into the AC IN socket on the back of the subwoofer then plug the other end into a power outlet. CAUTION Handle the power cord by the plug part. Do not pull out the plug by tugging the cord, and never touch the power cord when your hands are wet, as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, or other object on the power cord or pinch the cord in any other way. Never make a knot in the cord or tie it with other cables. The power cords should be routed so that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electric shock. Check the power cord once in a while. If you find it damaged, ask your nearest Pioneer authorized independent service company for a replacement. Do not use any power cord other than the one supplied with this unit. Do not use the supplied power cord for any purpose other than that described below. The system should be disconnected by removing the mains plug from the wall socket when not in regular use, e.g., when on vacation. Do not use any AC adapter other than the recommended unit, since fire or shock may occur. The supplied AC adapter is designed exclusively for use with this unit. Never attempt to use it with any device for which it was not expressly designed, since fires or shocks may occur. 02 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 15 En
03 Controls and displays Chapter 3 Controls and displays Front panel 1 2 3 STANDBY/ON INPUT STEREO/A.L.C. VOLUME 4 5 6 7 1 Wireless indicator Lights red or green, depending on status of unit. Standby mode: Lights red Power on, without wireless transmission
(subwoofer operation): Lights red Power on, with wireless transmission
(subwoofer operation): Lights green Display 2 IR remote sensor Front panel display 3 See Display below for details. 4 STANDBY/ON Switches the system on or into standby. INPUT 5 Selects an input source. STEREO/A.L.C. 6 Switches between stereo playback, Auto level control stereo mode (page 22) and Front Stage Surround Advance modes (page 23). 7 VOLUME +/
Adjusts the volume. 1 2 3 4 5 6 7 8 7 9 1 AUTO Lights when the Auto Surround feature is switched on (page 21). Sound Delay indicator 3 Displays the Audio Parameter sound delay status. 2 Character display Displays various system information. 4 DTS indicators DTS Lights when a source with DTS encoded audio signals is detected. 16 En
Controls and displays ES Lights when a source with DTS-ES encoded audio signals is detected. 96/24 Lights when a source with DTS 96/24 encoded audio signals is detected. NEO:6 When one of the NEO:6 modes of the system is on, this lights to indicate NEO:6 processing (page 22). HDMI Lights when an HDMI signal is selected. Blinks when an HDMI signal is not selected. 8 Dimmer indicator Lights when DIMMER is set to off. 9 DIR. Lights when the DIRECT or PURE DIRECT mode is switched on (page 23). Subwoofer 1 1 Wireless indicator Standby mode: Lights red During subwoofer operation: Lights green 5 Dolby Digital indicators 2D Lights when a Dolby Digital encoded signal is detected. 2D+
Lights when a source with Dolby Digital Plus encoded audio signals is detected. 2HD Lights when a source with Dolby TrueHD encoded audio signals is detected. EX Lights when a source with Dolby Digital EX encoded audio signals is detected. 2PLll Lights to indicate 2 Pro Logic II decoding
(see Listening in surround sound on page 22 for more on this). 6 ADV.S. Lights when one of the Advanced Surround modes has been selected (see Using the Advanced surround effects on page 22 for more on this). 7 SIGNAL SELECT indicators DIGITAL Lights when a digital audio signal is selected. Blinks when a digital audio signal is not selected. 03 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 17 En
03 Controls and displays Remote control 1 2 5 7 9 10 12 14 SYSTEM SYSTEM INPUT SOURCE INPUT HDMI1 HDMI2 TV CONTROL OPTICAL COAXIAL INPUT CH STANDARD ADV SURR TV CODE AUTO/
DIRECT STEREO/
A.L.C. DIMMER VOL LISTENING MODE BD MENU ENTER MUTE DISPLAY CH CH ENTER 3 4 6 8 11 13 15 16 SURROUND SYSTEM 7 1 SYSTEM Switches the system between standby and on. 2 Switches the remote to control the system. Also use to adjust the Audio parameters
(page 24). 18 En INPUT SELECT 3 Use to select the input source. 4 SOURCE Press to turn on/off other components connected to the system (see page 30 for more on this). INPUT SELECT buttons 5 Use to select the input source. Switch the remote control to operate any other components allocated to the selected buttons (see Controlling the rest of your system on page 27). TV CONTROL buttons 6 These buttons are dedicated to control the TV assigned to the button. Thus if you only have one TV to hook up to this system assign it to the for more on this). button (see page 29
Use to turn on/off the power of the TV. INPUT Use to select the TV input signal. Press to select control of TV. Also use to input a preset code allocated to the TV CONTROL button. CH +/
Use to select channels. VOL +/
Use to adjust the volume on your TV. Listening mode buttons AUTO/DIRECT Switches between Auto surround mode
(Auto playback on page 21) and Stream Direct playback. Stream Direct playback bypasses the tone controls for the most accurate reproduction of a source
(page 23).
Controls and displays STEREO/A.L.C. Switches between stereo playback, Auto level control stereo mode (page 22) and Front Stage Surround Advance modes
(page 23). STANDARD Press for Standard decoding and to switch between 2 Pro Logic II options (page 22). ADV SURR Switches between the various surround modes (page 22). 8 DIMMER Dims or brightens the display. The brightness can be controlled in four steps. First use INPUT SELECT button to select the input for the desired connected Blu-ray disc player, then access the following:
BD MENU Displays the disc menu of Blu-ray Discs. 9 Press System and component control buttons first to access:
AUDIO PARAMETER Use to access the Audio options (page 24). RETURN Confirm and exit the current menu screen. First use INPUT SELECT button to select the input for the desired connected component, then access the following:
TOP MENU Displays the disc top menu of a BD/DVD. HOME MENU Displays the HOME MENU screen. RETURN Confirm and exit the current menu screen. MENU Displays the TOOLS menu screen of Blu-ray Disc player. 10 , ENTER Use the arrow buttons when setting up your surround sound system (page 24). Also used to control BD/DVD menus/options. 11 MASTER VOLUME +/
Use to set the listening volume. 12 Component control buttons The main buttons (, , etc.) are used to control a component after you have selected it using the input source buttons. The controls above these buttons can be accessed after you have selected the corresponding input source button. These buttons also function as described below. Press first to access:
ANT Use to select the VHF/UHF antennas or Cable TV. 13 MUTE Mutes/unmutes the sound. 14 Number buttons and other component controls Use the number buttons to directly select the tracks on a CD, DVD, etc. HDD*, DVD*, VCR*
These buttons switch between the hard disk, DVD and VCR controls for HDD/DVD/
VCR recorders. 15 DISPLAY Switches the display of this unit. The input name, listening mode or sound volume can be checked by selecting an input source. 16 SHIFT Press to access the boxed commands (above the buttons) on the remote. These buttons are marked with an asterisk (* ) in this section. 03 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 19 En
03 Controls and displays Putting the batteries in the remote control Using the remote control 30 30 7 m (23 ft.) Please keep in mind the following when using the remote control:
Make sure that there are no obstacles between the remote and the remote sensor on the unit. Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the units remote sensor. Remote controllers for different devices can interfere with each other. Avoid using remotes for other equipment located close to this unit. Replace the batteries when you notice a fall off in the operating range of the remote. Use within the operating range in front of the remote control sensor on the unit, as shown. Caution Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following:
Dont mix new and old batteries together. Dont use different kinds of battery together although they may look similar, different batteries may have different voltages. Make sure that the plus and minus ends of each battery match the indications in the battery compartment. Remove batteries from equipment that isnt going to be used for a month or more. When disposing of used batteries, please comply with governmental regulations or environmental public instructions rules that apply in your country/area. Do not use or store batteries in direct sunlight or other excessively hot place, such as inside a car or near a heater. This can cause batteries to leak, overheat, explode or catch fire. It can also reduce the life or performance of batteries. 20 En
Listening to your system Chapter 4 Listening to your system Important The listening modes and many features described in this section may not be available depending on the current source, settings and status of the system. Basic operation Procedures for listening to audio from the connected component. Press MASTER VOLUME +/ to adjust the 6 volume. Auto playback The simplest, most direct listening option is the Auto Surround feature. With this, the system automatically detects what kind of source youre playing and selects multichannel or stereo playback as necessary.1 SYSTEM SYSTEM INPUT SOURCE INPUT HDMI1 HDMI2 TV CONTROL ENTER OPTICAL COAXIAL INPUT CH STANDARD ADV SURR TV CODE AUTO/
DIRECT STEREO/
A.L.C. DIMMER VOL LISTENING MODE BD MENU STANDARD ADV SURR TV CODE AUTO/
DIRECT STEREO/
A.L.C. DIMMER VOL LISTENING MODE BD MENU ANT MUTE While listening to a source, press AUTO/
DIRECT2 for auto playback of a source. Press repeatedly until AUTO SURROUND shows briefly in the display (it will then show the decoding or playback format). Check the digital format indicators in the display to see how the source is being processed. Turn on the power of the playback 1 component. Press SYSTEM to turn on the power of 2 this system. Select the source you want to playback. 3 Use INPUT SELECT (or front panel INPUT) buttons. Start playback of the component you 4 selected in step 1. Select the listening mode. 5 Use the listening mode buttons. Note 1 Stereo surround (matrix) formats are decoded accordingly using NEO:6 CINEMA or DOLBY PLII MOVIE (see Listening in surround sound above for more on these decoding formats). 2 For more options using this button, see Using Stream Direct on page 23. 04 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 21 En
04 Listening to your system Listening in surround sound Using this system, you can listen to any source in surround sound. However, the options available will depend on your speaker setup and the type of source youre listening to. The following modes provide basic surround sound for stereo and multichannel sources. Using the Advanced surround effects The Advanced surround feature creates a variety of surround effects. Try different modes with various soundtracks to see which you like. STANDARD ADV SURR TV CODE AUTO/
DIRECT STEREO/
A.L.C. DIMMER VOL LISTENING MODE BD MENU STANDARD ADV SURR TV CODE AUTO/
DIRECT STEREO/
A.L.C. DIMMER VOL LISTENING MODE BD MENU While listening to a source, press STANDARD. If the source is Dolby Digital, DTS, or Dolby Surround encoded, the proper decoding format will automatically be selected and shows in the display. With two channel sources, you can select from:
DOLBY PLII MOVIE Suitable for movie sources DOLBY PLII MUSIC1 Suitable for music sources DOLBY PLII GAME Suitable for video games NEO:6 CINEMA Suitable for movie sources NEO:6 MUSIC Suitable for music sources2 DOLBY PRO LOGIC Effective for stereo audio sources encoded with Dolby Surround. Press ADV SURR repeatedly to select a listening mode. ACTION Designed for action movies with dynamic soundtracks. DRAMA Designed for movies with lots of dialog. ENT.SHOW Suitable for musical sources. ADVANCED GAME Suitable for video games. SPORTS Suitable for sports programs. CLASSICAL Gives a large concert hall-
type sound. ROCK/POP Creates a live concert sound for rock and/or pop music. UNPLUGGED Suitable for acoustic music sources. EXT.STEREO Gives multichannel sound to a stereo source, using all of your speakers. Listening in stereo When you select STEREO you will hear the source through just the front left and right speakers (and possibly your subwoofer depending on your speaker settings). Dolby Digital and DTS multichannel sources are downmixed to stereo. Note 1 When listening to 2-channel sources in DOLBY PLII MUSIC mode, there are three further parameters you can adjust:
C.WIDTH, DIMEN., and PNRM.. See Setting the Audio options on page 24 to adjust them. 2 When listening to 2-channel sources in NEO:6 CINEMA or NEO:6 MUSIC mode, you can also adjust the C.IMG effect
(see Setting the Audio options on page 24). 22 En
Listening to your system In the Auto level control stereo mode (A.L.C.), this unit equalizes playback sound levels if each sound level varies with the music source recorded in a portable audio player. F.S.S.ADVANCE Use to provide a rich surround sound effect directed to the center of where the front left and right speakers sound projection area converges. F.S.S.ADVANCE position Front left speaker speaker Front right Using Stream Direct Use the Stream Direct modes when you want to hear the truest possible reproduction of a source. All unnecessary signal processing is bypassed. STANDARD ADV SURR TV CODE AUTO/
DIRECT STEREO/
A.L.C. DIMMER VOL LISTENING MODE BD MENU While listening to a source, press AUTO/
DIRECT to select Stream Direct mode. AUTO SURROUND See Auto playback on page 21. DIRECT Sources are heard in accordance with the settings made in dual mono mode.1 You will hear sources according to the number of channels in the signal. PURE DIRECT PCM sources are heard without any digital processing.2 STANDARD ADV SURR TV CODE AUTO/
DIRECT STEREO/
A.L.C. DIMMER VOL LISTENING MODE BD MENU While listening to a source, press STEREO/A.L.C. for stereo playback. Press repeatedly to switch between:
STEREO The audio is heard with your surround settings and you can still use the Midnight, Loudness, Phase Control and Sound Retriever functions. A.L.C. Listening in Auto level control stereo mode. F.S.S.ADVANCE See Using Front Stage Surround Advance below for more on this. Using Front Stage Surround Advance The Front Stage Surround Advance function allows you to create natural surround sound effects using just the front speakers and the subwoofer. STANDARD ADV SURR TV CODE AUTO/
DIRECT STEREO/
A.L.C. DIMMER VOL LISTENING MODE BD MENU While listening to a source, press STEREO/A.L.C. to select Front Stage Surround Advance modes. STEREO See Listening in stereo above for more on this. A.L.C. See Listening in stereo above for more on this. Note 1 In the DIRECT mode, Sound Delay, Auto Delay, LFE Attenuate and Center image functions are available. 2 There are cases where a brief noise is heard before playback of sources other than PCM. Please select AUTO SURROUND or DIRECT if this is a problem. 04 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 23 En
04 Listening to your system Setting the Audio options There are a number of additional sound settings you can make using the AUDIO PARAMETER menu. The defaults, if not stated, are listed in bold. Important Note that if a setting doesnt appear in the AUDIO PARAMETER menu, it is unavailable due to the current source, settings and status of the system. SYSTEM SYSTEM INPUT SOURCE Press 1 then press AUDIO PARAMETER button. on the remote control, 2 Use to select the setting you want to adjust. Depending on the current status/mode of the system, certain options may not be able to be selected. Check the table below for notes on this. 3 Use to set it as necessary. See the table below for the options available for each setting. Press RETURN to confirm and exit the 4 menu. INPUT HDMI1 HDMI2 TV CONTROL ENTER OPTICAL COAXIAL INPUT CH Setting S.DELAY
(Sound Delay) MIDNIGHT LOUDNESS S.RTV
(Sound Retriever) What it does Some monitors have a slight delay when showing video, so the soundtrack will be slightly out of sync with the picture. By adding a bit of delay, you can adjust the sound to match the presentation of the video. Allows you to hear effective surround sound of movies at low volumes. Used to get good bass and treble from music sources at low volumes. When audio data is removed during the WMA/MP3 compression process, sound quality often suffers from an uneven sound image. The Sound Retriever feature employs new DSP technology that helps bring CD quality sound back to compressed 2-channel audio by restoring sound pressure and smoothing jagged artifacts left over after compression. Option(s) 0.0 to 9.0 (frames) 1 second = 30 frames
(NTSC) Default: 0.0 M/L OFF MIDNIGHT LOUDNESS OFF ON 24 En
Listening to your system Setting DUAL MONO a What it does Specifies how dual mono encoded Dolby Digital soundtracks should be played. DRC
(Dynamic Range Control) LFE ATT
(LFE Attenuate) HDMI
(HDMI Audio) A.DLY
(Auto Delay) C.WIDTHd
(Center Width) DIMEN.d
(Dimension) PNRM.d
(Panorama) Adjusts the level of dynamic range for movie soundtracks optimized for Dolby Digital, DTS, Dolby Digital Plus and Dolby TrueHD (you may need to use this feature when listening to surround sound at low volumes). Some Dolby Digital and DTS audio sources include ultra-low bass tones. Set the LFE attenuator as necessary to prevent the ultra-low bass tones from distorting the sound from the speakers. The LFE is not limited when set to 0 dB, which is the recommended value. When set to 10 dB, the LFE is limited by the respective degree. When OFF is selected, no sound is output from the LFE channel. Specifies the routing of the HDMI audio signal out of this system (amp) or through to a TV or flat panel TV. When THRU is selected, no sound is output from this system. This feature automatically corrects the audio-to-video delay between components connected with an HDMI cable. The audio delay time is set depending on the operational status of the display connected with an HDMI cable. The video delay time is automatically adjusted according to the audio delay time.c Spreads the center channel between the front right and left speakers, making it sound wider (higher settings) or narrower (lower settings). Adjusts the surround sound balance from front to back, making the sound more distant (minus settings), or more forward (positive settings). Extends the front stereo image to include surround speakers for a wraparound effect. Option(s) CH1 Channel 1 is heard only CH2 Channel 2 is heard only CH1 CH2 Both channels heard from front speakers AUTOb MAX MID OFF LFEATT 0 (0 dB) LFEATT 10 (10 dB)/
LFEATT ** (OFF) AMP THRU OFF ON 0 to 7 Default: 3 3 to +3 Default: 0 OFF ON 04 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 25 En
04 Listening to your system Setting C.IMGe
(Center image) What it does Adjust the center image to create a wider stereo effect with vocals. Adjust the effect from 0 (all center channel sent to front right and left speakers) to 10
(center channel sent to the center speaker only). Option(s) 0 to 10 Default: 3
(NEO:6 MUSIC), 10 (NEO:6 CINEMA) a. This setting works only with dual mono encoded Dolby Digital and DTS soundtracks. b. The initial set AUTO is only available for Dolby TrueHD signals. Select MAX or MID for signals other than Dolby TrueHD. c. This feature is only available when the connected display supports the automatic audio/video synchronizing capability (lip-sync) for HDMI. If you find the automatically set delay time unsuitable, set A.DLY to OFF and adjust the delay time manually. For more details about the lip-sync feature of your display, contact the manufacturer directly. d. Only available with 2-channel sources in DOLBY PLII MUSIC mode. e. Only when listening to 2-channel sources in NEO:6 CINEMA and NEO:6 MUSIC mode. 26 En
Controlling the rest of your system Chapter 5 Controlling the rest of your system Setting the remote to control other components Most components can be assigned to one of the or INPUT SELECT buttons using the components manufacturer preset code stored in the remote. However, please note that there are cases where only certain functions may be controllable after assigning the proper preset code, or the codes for the manufacturer in the remote control will not work for the model that you are using. Note You can cancel or exit any of the steps by pressing
. After one minute of inactivity, the remote automatically exits the operation. Select preset codes for TVs SYSTEM SYSTEM INPUT SOURCE INPUT HDMI1 HDMI2 TV CONTROL OPTICAL COAXIAL INPUT CH STANDARD ADV SURR TV CODE AUTO/
STEREO/
VOL ANT MUTE DISPLAY CH CH ENTER 1 While pressing the press and hold the 1 button for three seconds. button, 2 Press the button. 3 Use the number buttons to enter the preset code. You can find the preset codes on page 31. If the correct code has been input the power of the TV being input will turn on or off. The power of the TV being input will only turn on or off if that TV is able to be turned on directly by remote control. 4 Repeat steps 2 through 3 to try a different code. 5 When youre done, press
. 05 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 27 En
05 Controlling the rest of your system Select preset codes for other components SYSTEM SYSTEM INPUT SOURCE INPUT HDMI1 HDMI2 TV CONTROL DISPLAY CH CH Clearing all the remote control settings You can clear all presets and restore the factory default settings. While pressing the press and hold the 0 button for three seconds. button, Default preset codes INPUT SELECT button HDMI1 HDMI2 OPTICAL COAXIAL Preset code 2 1 2 7 (BD) 2 1 2 2 (DVD) 2 1 2 1 (DVR) 1 1 2 0 (VCR) 0 1 2 0 OPTICAL COAXIAL INPUT CH ENTER 1 While pressing the press and hold the 1 button for three seconds. button, Press the INPUT SELECT button for the 2 component you want to control. 3 Use the number buttons to enter the preset code. You can find the preset codes on page 31. If the correct code has been input the power of the component being input will turn on or off. The power of the component being input will only turn on or off if that component is able to be turned on directly by remote control. 4 Repeat steps 2 through 3 to try a different code, or to enter a code for another component you want to control. 5 When youre done, press
. 28 En
Controlling the rest of your system Controls for TVs This remote control can control TV after entering the proper code (see Select preset codes for TVs on page 27). To operate a TV, press INPUT SELECT button for the input to which the TV is connected. The TV CONTROL buttons on the remote control are dedicated to control the TV assigned to the button. Function Switches the DTV on or off. Switches the TV or CATV between standby and on. Switches the TV input. (Not possible with all models.) Components DTV Cable TV/Satellite TV/TV TV Button(s) TV CONTROL a TV CONTROL INPUTa TV CONTROL CH +/a TV CONTROL VOL +/a
SOURCE Selects channels. Adjust the TV volume. Press to switch the component assigned to the TV button on or off. Use to select the VHF/UHF antennas or Cable TV. Switches TEXT ON/OFF for TVs. ANT TOP MENU HOME MENU Use as the GUIDE button for navigating. RETURN Number buttons
+10 button ENTER MENU
ENTER CH +/
Use to select closed captioning with DTV. Use to select a specific TV channel. Use to add a decimal points when selecting TV channels. Use to enter a channel. Press to display the DTV menu. Select the menu screen. Press to select or adjust and navigate items on the menu screen. Selects channels. Cable TV/Satellite TV/TV/
DTV Cable TV/Satellite TV/TV/
DTV Cable TV/Satellite TV/TV/
DTV Cable TV/TV TV Cable TV/Satellite TV/TV/
DTV DTV Cable TV/Satellite TV/TV/
DTV DTV Cable TV/Satellite TV/TV/
DTV DTV Cable TV/Satellite TV/TV Cable TV/Satellite TV/TV/
DTV Cable TV/Satellite TV/TV/
DTV a.When an input for a component other than a TV is selected, a TV assigned to can be operated. 05 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 29 En
05 Controlling the rest of your system Controls for other components This remote control can control these components after entering the proper codes (see Select preset codes for other components on page 28). To operate another component, press INPUT SELECT button for the component to which a preset code has been input. Function Button(s)
SOURCE Press to switch the component between standby and on. BD/DVD player, DVR, VCR BD/DVD player, DVR, VCR Components
Number buttons ENTER Press to return to the start of the current track. Repeated presses skips to the start of previous tracks. Press to advance to the start of the next track. Repeated presses skips to the start of following tracks. Pause playback or recording. Start playback. Hold down for fast forward playback. Hold down for fast reverse playback. Stops playback (on some models, pressing this when the disc is already stopped will cause the disc tray to open). Directly access tracks on a program source. Use to enter a title/chapter/track number.
+10 button Selects tracks higher than 10. (For example, press +10 then 3 to select track 13.) Use as the ENTER button. Displays the DISC NAVI screen for DVD recorder. Press to display information. DISPLAY TOP MENU Displays the disc top menu of a BD/DVD player. MENU Displays menus for the current BD/DVD player or DVD recorder you are using. Navigates BD/DVD menu/options.
, ENTER &
RETURN HOME MENU Displays the HOME MENU. CH +/
HDD
(SHIFT + 1) DVD
(SHIFT + 2) VCR
(SHIFT + 3) Selects channels. Switches to the hard disk controls when using an HDD/
DVD recorder. Switches to the DVD controls when using an HDD/DVD recorder. Switches to the VCR controls when using an HDD/DVD/
VCR recorder. BD/DVD player, DVR, VCR BD/DVD player, DVR, VCR BD/DVD player, DVR, VCR BD/DVD player, DVR, VCR BD/DVD player, DVR, VCR BD/DVD player, DVR, VCR VCR BD/DVD player, DVR BD/DVD player, DVR BD/DVD player DVR BD/DVD player, DVR BD/DVD player, DVR BD/DVD player, DVR BD/DVD player, DVR BD/DVD player, DVR DVR, VCR HDD/DVD/VCR recorder HDD/DVD/VCR recorder HDD/DVD/VCR recorder 30 En
Controlling the rest of your system Preset Code List You should have no problem controlling a component if you find the manufacturer in this list, but please note that there are cases where codes for the manufacturer in the list will not work for the model that you are using. There are also cases where only certain functions may be controllable after assigning the proper preset code. BD/DVD/DVR Manufacturer Code Accurian 2092 Advent 2072 Aiwa 2012 Akai 2066 Alco 2070 Allegro 2087 Amphion MediaWorks AMW 2037 Apex 2002, 2018, 2079, 2037 2080 Apple 2058 Arrgo 2088 Aspire 2073 Astar 2052 Audiovox 2070 Axion 2040 Bang & Olufsen 2081 Blaupunkt 2080 Blue Parade 2078 Boston 2059 Broksonic 2066 California Audio Labs 2068 2065 CambridgeSoundWorks CineVision 2087 Coby 2029 Curtis Mathes 2089 CyberHome 2000, 2088 Cytron 2039 Daewoo 2021, 2087 Denon 2026, 2068 Desay 2055 DiamondVision 2042 Disney 2022 Durabrand 2090 Emerson 2067, 2082, 2091 Enterprise 2082 ESA 2053, 2091 Fisher 2083 Funai 2091 GE 2016, 2077, 2080 GFM 2043 Go Video 2087 Gradiente 2068 Greenhill 2080 Haier 2094 Harman/Kardon 2030, 2084 Hitachi 2011 Hiteker 2079 iLive 2062 Ilo 2038 Initial 2038, 2080 Insignia 2036, 2064, 2091 Integra 2078 iSymphony 2060 JBL 2084 JVC 2013 Kawasaki 2070 Kenwood 2028, 2068 KLH 2070, 2080 Koss 2024, 2069, 2075 Landel 2093 Lasonic 2085 Lenoxx 2074, 2090 LG 2019, 2051, 2061, 2082, Liquid Video 2075 Liteon 2025, 2092 Magnavox 2067, 2076, 2087 2091 Memorex 2066 Microsoft 2077 Mintek 2038, 2080, 2086 Mitsubishi 2020 Nesa 2080 Next Base 2093 Nexxtech 2056 Onkyo 2076 Oppo 2041, 2057 Oritron 2069, 2075 Panasonic 2005, 2007, 2017, 2032, 2033, 2050, 2068, 2076 Philips 2045, 2076 Pioneer 2014, 2034, 2078, 2120, 2121, 2122, 2125, 2126, 2127 Proceed 2079 Proscan 2077 Qwestar 2069 RCA 2008, 2016, 2070, 2077, 2078, 2080 Regent 2074 Rio 2087 Rowa 2071 Samsung 2009, 2011, 2015, 2031, 2044, 2068 Sansui 2066 Sanyo 2066, 2083 Sharp 2035 Sherwood 2063 Shinsonic 2086 Sonic Blue 2087 Sony 2003, 2004, 2010, 2012, 2027, 2046, 2047, 2048 Sungale 2054 Superscan 2067 Sylvania 2023, 2067, 2091 Symphonic 2023 Teac 2070 Technics 2068 Theta Digital 2078 Toshiba 2001, 2006, 2049, 2066, 2076 Trutech 2000 Urban Concepts 2076 US Logic 2086 Venturer 2070 Xbox 2077 Yamaha 2005, 2068 Zenith 2019, 2076, 2082, 2087 TV Manufacturer Code Admiral 0001, 0014 Adventura 0012 Aiwa 0002 Akai 0002, 0100 Albatron 0097 Alleron 0009 America Action 0104 Amtron 0008 Anam 0104 Anam National 0003, 0008 AOC 0004, 0005, 0006, 0100 Apex 0021, 0102, 0106 Audiovox 0008, 0104 Aventura 0103 Axion 0094 Bang & Olufsen 0111 Belcor 0004 Bell & Howell 0001 Benq 0064 Bradford 0008, 0104 Brillian 0109 Brockwood 0004 Broksonic 0104 Candle 0004, 0006, 0012, 0100 Carnivale 0100 Carver 0101 CCE 0110 Celebrity 0002 Celera 0106 Changhong 0106 Citizen 0004, 0006, 0008, 0100 Clarion 0104 Coby 0056 Colortyme 0004, 0006 Concerto 0004, 0006 Contec 0104 Contec/Cony 0007, 0008 Craig 0008, 0104 Crosley 0081, 0101 Crown 0008, 0104 CTX 0063 Curtis Mathes 0000, 0004, 0006, 0014, 0100, 0101 CXC 0008, 0104 Cytron 0093 Daewoo 0004, 0005, 0006, 0023 Daytron 0004, 0006 Dell 0073 DiamondVision 0096 Dimensia 0000 Disney 0046 Dumont 0004, 0011, 0099 Durabrand 0041, 0103, 0104 Dwin 0014 Electroband 0002 05 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 31 En
05 Controlling the rest of your system Electrograph 0107 Electrohome 0002, 0003, 0004, 0006 Element 0082 Emerson 0004, 0006, 0007, 0008, 0009, 0023, 0103, 0104 Emprex 0092 Envision 0004, 0006, 0100 Epson 0061 ESA 0103 Fujitsu 0009 Funai 0008, 0009, 0103, 0104 Futuretech 0008, 0104 Gateway 0067, 0107, 0108 GE 0000, 0003, 0004, 0006, 0010, 0016, 0039 GFM 0080, 0084 Gibralter 0004, 0011, 0099, 0100 Goldstar 0004, 0005, 0006, 0007, 0100 Gradiente 0066 Grunpy 0008, 0009, 0104 Haier 0112 Hallmark 0004, 0006 Harman/Kardon 0101 Harvard 0008, 0104 Havermy 0014 Hewlett Packard 0053 Hisense 0069 Hitachi 0004, 0006, 0007 Hyundai 0098 Ilo 0089, 0091 IMA 0008 Infinity 0101 InFocus 0074 Initial 0091 Insignia 0085, 0086 Inteq 0099 Janeil 0012 JBL 0101 JC Penney 0000, 0004, 0005, 0006, 0010 JCB 0002 Jensen 0004, 0006 JVC 0007, 0010, 0044 Kawasho 0002, 0004, 0006 KEC 0104 Kenwood 0004, 0006, 0100 KLH 0106 Kloss Novabeam 0008, 0012 KTV 0008, 0100, 0104, 0110 LG 0005, 0052, 0078, 0097 Logik 0001 Luxman 0004, 0006 LXI 0000, 0006, 0101, 0102 Magnavox 0004, 0006, 0019, 0020, 0037, 0042, 0100, 0101 Majestic 0001 Marantz 0004, 0006, 0062, 0100, 0101 Matsushita 0105 Maxent 0087, 0107 Megapower 0097 Megatron 0006 Memorex 0001, 0005, 0006, 0041 MGA 0004, 0005, 0006, 0100 Midland 0010, 0011, 0099 Mintek 0091 Mitsubishi 0004, 0005, 0006, 0014, 0045 Monivision 0097 Montgomery Ward 0001 Motorola 0003, 0014 MTC 0004, 0005, 0006, 0100 Multitech 0008, 0104, 0110 NAD 0006, 0102 NEC 0003, 0004, 0005, 0006, 0100 Net-TV 0107 Nikko 0006, 0100 Norcent 0060 Olevia 0048, 0054, 0059 Onwa 0008, 0104 Oppo 0095 Optimus 0105 Optoma 0075 Optonica 0014 Orion 0025 Panasonic 0003, 0010, 0017, 0027, 0105, 0121 Penney 0100, 0102 Philco 0003, 0004, 0005, 0006, 0007, 0100, 0101 Philips 0003, 0004, 0007, 0019, 0020, 0101 Philips Magnavox 0019 Pilot 0004, 0100 Pioneer 0004, 0006, 0120 Polaroid 0057, 0106 Portland 0004, 0005, 0006 Prima 0065 Princeton 0097 Prism 0010 Proscan 0000 Proton 0004, 0006, 0007 Protron 0055 Proview 0068 Pulsar 0004, 0011, 0099 Quasar 0003, 0010, 0105 Radio Shack 0100, 0104 Radio Shack/Realistic 0000, 0004, 0006, 0007, 0008 RCA 0000, 0003, 0004, 0005, 0006, 0013, 0024, 0035 Realistic 0100, 0104 Runco 0011, 0099, 0100 Sampo 0004, 0006, 0100, 0107 Samsung 0004, 0005, 0006, 0007, 0022, 0032, 0076, 0077, 0083, 0100, 0110 Sansui 0025 Sanyo 0004, 0050 Sceptre 0072 Scotch 0006 Scott 0004, 0006, 0007, 0008, 0009, 0090, 0104 Sears 0000, 0004, 0006, 0009, 0101, 0102, 0103 Sharp 0004, 0006, 0007, 0014, 0033 Sheng Chia 0014 Shogun 0004 Signature 0001 Sony 0002, 0018, 0029, 0030, 0031, 0034 Soundesign 0004, 0006, 0008, 0009, 0104 Squareview 0103 SSS 0004, 0008, 0104 Starlite 0008, 0104 Superscan 0014 Supre-Macy 0012 Supreme 0002 SVA 0088 Sylvania 0004, 0006, 0049, 0079, 0080, 0100, 0101, 0103 Symphonic 0008, 0041, 0103, 0104 Syntax 0054 Syntax-Brillian 0054 Tandy 0014 Tatung 0003, 0108 Technics 0010, 0105 Techwood 0004, 0006, 0010 Teknika 0001, 0004, 0005, 0006, 0007, 0008, 0009, 0101, 0104 TMK 0004, 0006 TNCi 0099 Toshiba 0026, 0028, 0036, 0038, 0040, 0043, 0102 Vector Research 0100 Vidikron 101 Vidtech 0004, 0005, 0006 Viewsonic 0058, 0107 Viking 0012 Viore 0089 Vizio 0004, 0070, 0071, 0108 Wards 0000, 0001, 0004, 0005, 0006, 0009, 0100, 0101 Waycon 0102 Westinghouse 0047, 0051 White Westinghouse 0023 0100 Yamaha 0004, 0005, 0006, Zenith 0001, 0004, 0011, 0015, 0099 VCR Manufacturer Code ABS 1017 Adventura 1005 Aiwa 1005 Alienware 1017 American High 1004 Asha 1002 Audio Dynamics 1000 Audiovox 1003 Bang & Olufsen 1032 Beaumark 1002 Bell & Howell 1001 Calix 1003 Candle 1002, 1003 Canon 1004 Citizen 1002, 1003 Colortyme 1000 Craig 1002, 1003 Curtis Mathes 1000, 1002, 1004 Cybernex 1002 CyberPower 1017 Daewoo 1005 DBX 1000 Dell 1017 DIRECTV 1016, 1020, 1022, 1023, 1024, 1027, 1030, 1031 Dish Network 1029 Dishpro 1029 Durabrand 1018 Dynatech 1005 Echostar 1029 Electrohome 1003 Electrophonic 1003 Emerson 1003, 1004, 1005 Expressvu 1029 32 En
Controlling the rest of your system Touch 1017 UltimateTV 1031 Unitech 1002 Vector Research 1000 Video Concepts 1000 Videosonic 1002 Viewsonic 1017 Voodoo 1017 Wards 1002, 1003, 1004, 1005 XR-1000 1004, 1005 Yamaha 1000, 1001 Zenith 1013, 1018 ZT Group 1017 Fisher 1001 Fuji 1004 Funai 1005 Garrard 1005 Gateway 1017 GE 1002, 1004 GOI 1029 Goldstar 1000, 1003 Gradiente 1005 Harley Davidson 1005 Harman/Kardon 1000 Headquarter 1001 Hewlett Packard 1017 HNS 1016 Howard Computers 1017 HP 1017 HTS 1029 Hughes Network Systems 1016, 1020, 1022, 1023, 1024 Humax 1016, 1020 Hush 1017 iBUYPOWER 1017 Instant Replay 1004 JC Penney 1000, 1001, 1002, 1003, 1004 JCL 1004 JVC 1000, 1001, 1020, 1029 Kenwood 1000, 1001 Kodak 1003, 1004 LG 1003 Linksys 1017 Lloyd's 1005 LXI 1003 Magnavox 1004, 1018 Magnin 1003 Marantz 1000, 1001, 1004 Marta 1003 Matsushita 1004 Media Center PC 1017 MEI 1004 Memorex 1001, 1002, 1003, 1004, 1005, 1018, 1019 MGN Technology 1002 Microsoft 1017 Mind 1017 Mitsubishi 1010 Motorola 1004 MTC 1002 Multitech 1002, 1005 NEC 1000, 1001 Nikko 1003 Niveus Media 1017 Noblex 1002 Northgate 1017 Olympus 1004 Optimus 1003 Orion 1014, 1019 Pioneer 1120 Panasonic 1004, 1008 Philco 1004 Philips 1004, 1011, 1016, 1020, 1022, 1023, 1024, 1025 Philips Magnavox 1011 Pilot 1003 Proscan 1030 Pulsar 1018 Quarter 1001 Quartz 1001 Quasar 1004 Radio Shack 1003 Radio Shack/Realistic 1001, 1002, 1003, 1004, 1005 Radix 1003 Randex 1003 RCA 1002, 1004, 1007, 1016, 1020, 1022, 1030, 1031 Realistic 1001, 1002, 1003, 1004, 1005 ReplayTV 1026 Ricavision 1017 Runco 1018 Samsung 1002, 1016, 1022, 1024 Sanky 1018 Sansui 1014, 1019 Sanyo 1001, 1002 Sears 1001, 1003, 1004 Sharp 1012 Shogun 1002 Singer 1004 Sonic Blue 1026 Sony 1006, 1009, 1017, 1021 Stack 1017 STS 1004 Sylvania 1004, 1005 Symphonic 1005 Systemax 1017 Tagar Systems 1017 Tandy 1001 Tashiko 1003 Teac 1005 Technics 1004 Teknika 1003, 1004, 1005 Tivo 1016, 1020, 1021, 1022, 1025 TMK 1002 Toshiba 1015, 1017, 1028 Totevision 1002, 1003 05 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 33 En
06 Additional information Chapter 6 Additional information Troubleshooting Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Take a look at the other components and electrical appliances being used, because sometimes the problem may lie there. If the trouble isnt sorted out even after going through the checks below, ask your nearest Pioneer authorized independent service company to carry out repair work. If the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the outlet and insert again to return to normal operating conditions. Remedy Problem The power does not turn on. Disconnect the power plug from the outlet, and insert again. The system suddenly switches off. After about a minute (you wont be able to switch the unit on during this time), switch the system back on. If the message persists, call a Pioneer authorized independent service company. Make sure the component is connected correctly (refer to Connecting up on page 12). Press MUTE on the remote control to turn muting off. Make sure the component is connected correctly (refer to Connecting up on page 12). Select the correct component (use the INPUT SELECT buttons). The video input selected on the TV monitor is incorrect. Refer to the instruction manual supplied with the TV. If another electronic device (cordless phone, Bluetooth wireless technology device, wireless LAN, microwave oven, etc.) using the same frequency (2.4 GHz) is operating nearby, change its location. The high frequency range utilized by this device for signal transmission possesses the same characteristics of straight-line transmission, reflection, refraction, defraction, and interference as ordinary light waves. As a result, the efficiency of signal transmission may vary depending on the location, resulting in broken or interrupted sound. In such cases, try changing the installation location or conditions. If signal transmission is ineffective due to excessive distance between the main unit and subwoofer, try placing the subwoofer closer to the main unit. When using the system in an area subject to frequent static or electrical noise, try changing the subwoofers installation location. No sound is output when a function is selected. No image is output when a function is selected. Subwoofer sound is intermittent. 34 En
Additional information Problem No sound from subwoofer. The Dolby Digital or DTS source you are listening to may not have an Remedy LFE channel. Switch the LFE ATT (LFE Attenuate) on page 25 to LFEATT 0 or LFEATT 10. Transmission qualities may vary due to the presence of obstacles or reflective objects in the signal path. Try changing the position or orientation of the subwoofer. The main unit and the subwoofer in this set act as a pair, and are designed to recognize each other specifically. Signal transmission is not possible when a main unit or subwoofer from another set is used. The subwoofer may not emit sound when playing music that lacks a continuing low bass range. Perform pairing of the main unit and subwoofer (refer to page 8). Move the cassette deck away from your system, until the noise disappears. Set the digital volume level of the player to full, or to the neutral position. Make sure the players settings are correct and/or the DTS signal out is on. Refer to the instruction manual supplied with the DVD player. This is not a malfunction, but be sure to turn the volume down to prevent the output of loud noise from your speakers. Replace the batteries (refer to page 20). Operate within 7 m (23 ft.), 30 of the remote sensor (refer to page 20). Remove the obstacle or operate from another position. Avoid exposing the remote sensor on the front panel to direct light. Press DIMMER on the control repeatedly to return to the default. Remedy If the problem still persists when connecting your HDMI component directly to your monitor, please consult the component or monitor manual or contact the manufacturer for support. Noise during playback of a cassette deck. No sound is output or a noise is output when software with DTS is played back. During a playback search, noise is output from a DTS compatible CD player. Cant operate the remote control. The display is dark or off. HDMI Symptom No picture or sound. 06 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 35 En
06 Additional information Symptom No picture. No sound, or sound suddenly ceases. Remedy Depending in the output settings of the source component, it may be outputting a video format that cant be displayed. Change the output settings of the source, or connect your source component directly to TV using the component or composite video jacks. This system is HDCP-compatible. Check that the components you are connecting are also HDCP-compatible. If they are not, please connect your source component directly to TV using the component or composite video jacks. Depending on the connected source component, its possible that it will not work with this system (even if it is HDCP-compatible). In this case, connect your source component directly to TV using the component or composite video jacks. If video images do not appear on your TV or flat panel TV, try adjusting the resolution, DeepColor or other setting for your component. To output signals in DeepColor, use an HDMI cable (High Speed HDMITM Cable) to connect this system to a component or TV with the DeepColor feature. If youve made separate connections for audio, make sure you have assigned the analog/digital jack(s) to the corresponding HDMI input for the component. Check the audio output settings of the source component. Check that the Audio Parameter setting is set to HDMI AMP/THRU (refer to page 25). If the component is a DVI device, use a separate connection for the audio. Important information regarding the HDMI connection There are cases where you may not be able to route HDMI signals through this system (this depends on the HDMI equipped component you are connecting-check with the manufacturer for HDMI compatibility information). If you arent receiving HDMI signals properly through this system (from your component), please try the following configuration when connecting up. Configuration1 Connect your HDMI-equipped component directly to the display using an HDMI cable. Then use the most convenient connection
(digital is recommended) for sending audio to the system. See the operating instructions for more on audio connections. Set the display volume to minimum when using this configuration. Note 1 If your display only has one HDMI terminal, you can only receive HDMI video from the connected component. Depending on the component, audio output may be limited to the number of channels available from the connected display unit (for example audio output is reduced to 2 channels for a monitor with stereo audio limitations). If you want to switch the input source, youll have to switch functions on both the system and your display unit. Since the sound is muted on the display when using the HDMI connection, you must adjust the volume on the display every time you switch input sources. 36 En
Additional information Precautions when using a wireless subwoofer Precautions regarding wavelength This unit is designed to prevent other persons from eavesdropping on the transmitted signals, but precautions should nonetheless be taken against the chance that other persons' could intercept and listen to the signals transmitted. Given that this unit produces radio wave transmissions, another person could deliberately use a receiver to attempt to intercept such transmissions. As a result, this device should not be used to play important transmissions demanding privacy. This unit utilizes the 2.4 GHz frequency band. This band is also used by a variety of other devices as noted below. In particular, devices not often cognizant to the user are listed in item 2. Examples of common devices utilizing the 1 2.4 GHz band:
Cordless phone Cordless facsimile Microwave oven Wireless LAN router Wireless AV device (including Pioneer wireless subwoofers) Wireless controllers for games Microwave therapeutic devices Bluetooth wireless technology devices 2 Other devices using 2.4 GHz:
Shoplifting-prevention systems Amateur wireless radio Distribution control systems at factories and warehouses Railway and emergency vehicle wireless identification systems When such devices are used simultaneously with this speaker system, signal interference may occur, resulting in signal dropouts, noise, or interrupted sound. In such cases, the main unit's indicator will light red. This condition is a result of signal interference, and is not a malfunction of the unit. To improve reception quality, try the following:
Turn off the other device emitting radio waves. Place the interfering device farther away. Do not use this system in the following locations, since noise or transmission interruption may result:
Locations where another device using the same 2.4 GHz frequency is being used, such as a Bluetooth wireless technology device or wireless LAN, or in the vicinity where the magnetic field, static electricity, or radio wave interference from another device may occur (depending on the environment, radio waves may not transmit effectively). Move the radio farther away (noise may result). If visual noise appears on the television screen, it is possible that this unit is producing adverse influence on the antenna input of the television, video device, BS tuner, or CS tuner. Move this unit farther away from the antenna input of the affected device. 06 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 37 En
06 Additional information Usable range Designed for use only within private homes
(signal transmission distance may be reduced due to room design or conditions). In the following cases, sound may experience dropouts or be interrupted due to poor or erratic radio wave transmission. When signal transmission is blocked by a wall or floor constructed of ferro-concrete or metal. Nearby large metal furniture objects In large crowds of people, or near obstructive buildings. Locations where another device using the same 2.4 GHz frequency is being used, such as a Bluetooth wireless technology device or wireless LAN, or in the vicinity where the magnetic field, static electricity, or radio wave interference from another device may occur. When living in a housing complex
(apartment, condominium, etc.) where the next-door unit has a microwave oven located near to this unit. Note that even a microwave oven will not interfere with this unit when not in use. When using multiple Pioneer wireless subwoofers in the same location. Signal reflection The signals reaching the wireless subwoofer include those transmitted in a straight line from the main unit (direct waves), and those that are received after being bounced off of walls, furniture, and other buildings (reflected waves). As a result, reflected waves can be generated by obstacles and other reflective objects, causing variations in the signal quality and resulting sound. In such cases, try slightly changing the position of the wireless subwoofer. Sound may also experience dropouts or interruptions due to being blocked by someone in the room, or when someone approaches the unit. Caution With the exception of cases determined by law to be the subject of legal liability, Pioneer refuses all responsibility for any harm resulting to the customer or other person as a result of the use of this unit. For safe use Do not use near electronic devices utilizing high-precision or very delicate radio waves, since the other device may operate incorrectly, resulting in malfunction. Examples of devices requiring particular caution:
Hearing aids, pacemakers and other medical or therapeutic electronic devices, fire/smoke detectors, automatic door openers, other automatic devices. Persons using pacemakers or other medical or therapeutic electronic devices should consult the manufacturer or dealer of their device regarding the potential effects of radio waves from this unit. Do not use in aircraft, hospitals, or other locations where the use of radio-wave-
generating devices is prohibited, since adverse affects may be caused to flight communications equipment or medical devices. Follow all precautions and directives given by medical institutions. 38 En
Additional information Resetting the main unit Use this procedure to reset all the systems settings to the factory default. Use the front panel controls to do this. 1 Switch the system on. 2 While holding down the STEREO/A.L.C. button on the front panel, press and hold the HDMI1 button on remote control for about two seconds. 3 Unplug the power cord. The system has been reset to the factory settings. Specifications Main unit HTP-SB300SB Amplifier section Rated power output Front . 50 W per channel (1 kHz, 6 , 10 %) Center . 50 W (1 kHz, 6 , 10 %) Input/Output section HDMI terminal:
Input . 19-pin x2 Output. 19-pin (5 V, 100 mA) Audio input. Coaxial x1, Optical x1 (Digital) Speaker section Front speakers Enclosure . Closed-box type
(magnetically shielded) System . 7.7 cm (3 in.) 1-way system Speakers. 7.7 cm (3 in.) cone type Impedance . 6 Frequency range . 200 Hz to 20 kHz Maximum input power . 100 W Center speaker Enclosure . Closed-box type
(magnetically shielded) System . 7.7 cm (3 in.) 1-way system Speakers. 7.7 cm (3 in.) cone type x2 Impedance . 12 Frequency range . 200 Hz to 20 kHz Maximum input power . 100 W Miscellaneous Power Requirements
. AC 120 V/60 Hz Power Consumption. 40 W In standby . 1 W Dimensions
. 900 mm (W) x 108 mm (H) x 95 mm (D)
(35 7/16 in. (W) x 4 5/16 in. (H) x 3 3/4 in. (D)) Weight (without package) . 2.9 kg (6 lb 7 oz) Accessories Remote control . 1 Dry cell batteries (AAA size IEC R03) . 2 AC adapter . 1 Power cords . 2 Brackets (for main unit) . 2 Wall mounting template . 1 Non-skid pads (for subwoofer) . 4 Operating instructions (This document) Wireless subwoofer HTP-SB300SW Amplifier section Rated power output Subwoofer . 100 W (100 Hz, 4 , 10 %) Speaker section Enclosure . Bass-reflex type System . 16 cm (6 5/16 in.) 1-way system Speakers . 16 cm (6 5/16 in.) cone type x1 Impedance . 4 Frequency range . 40 Hz to 1 000 Hz Maximum input power . 100 W Miscellaneous Power Requirements
. AC 120 V/60 Hz Power Consumption. 45 W In standby . 1 W Dimensions
. 411 mm (W) x 181 mm (H) x 215 mm (D)
(16 7/16 in. (W) x 7 13/16 in. (H) x 8 1/2 in. (D)) Weight (without package) . 4.4 kg (9 lb 12 oz) 25 Note Specifications and the design are subject to possible modifications without notice, due to improvements. 06 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 39 En
06 Additional information Cleaning the unit Use a polishing cloth or dry cloth to wipe off dust and dirt. When the surface is dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with water, and wrung out well, and then wipe again with a dry cloth. Do not use furniture wax or cleansers. Never use thinners, benzine, insecticide sprays or other chemicals on or near this unit, since these will corrode the surface. Published by Pioneer Corporation. Copyright 2009 Pioneer Corporation. All rights reserved. ANTENNA GAIN : 2.08 dBi RF Modulation Type : GFSK 40 En
Additional information 06 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 41 En
IMPORTANT ATTENTION DANGER DELECTROCUTION NE PAS OUVRIR Ce symbole de lclair, plac dans un triangle quilatral, a pour but dattirer lattention de lutilisateur sur la prsence, lintrieur du coffret de lappareil, de tensions dangereuses non isoles dune grandeur suffisante pour reprsenter un risque dlectrocution pour les tres humains. ATTENTION :
POUR VITER TOUT RISQUE DLECTROCUTION, NE PAS ENLEVER LE COUVERCLE (NI LE PANNEAU ARRIRE). AUCUNE PICE RPARABLE PAR LUTILISATEUR NE SE TROUVE LINTRIEUR. CONFIER TOUT ENTRETIEN UN PERSONNEL QUALIFI UNIQUEMENT. Ce point dexclamation, plac dans un triangle quilatral, a pour but dattirer lattention de lutilisateur sur la prsence, dans les documents qui accompagnent lappareil, dexplications importantes du point de vue de lexploitation ou de lentretien. D3-4-2-1-1_A1_Fr REMARQUE : Cet appareil a t test et dclar conforme aux limites imposes aux appareils numriques de Classe B, telles que dfinies dans larticle 15 de la Rglementation de la FCC. Ces limites sont destines protger de faon raisonnable des interfrences pouvant apparatre dans une installation rsidentielle. Cet appareil gnre, utilise et peut diffuser de lnergie frquence radio et, sil nest pas install et utilis conformment aux instructions, peut causer des interfrences graves sur les communications radio. Toutefois, il nest pas garanti que des interfrences ne se produiront pas dans une installation particulire. Si cet appareil devait causer des interfrences graves sur la rception radio ou TV, ce qui peut tre constat en mettant lappareil sous et hors tension, lutilisateur devra essayer dliminer ces interfrences en prenant une des mesures suivantes :
Rorienter lantenne ou la changer de place. Eloigner lappareil du rcepteur. Raccorder lappareil sur un autre circuit lectrique que celui du rcepteur. Consulter le revendeur ou un professionnel radio/TV. D8-10-1-2_Fr Cet appareil numrique de la Classe B est conforme la norme NMB-003 du Canada. D8-10-1-3_A1_Fr ATTENTION Ce produit est conforme la rglementation de la FCC sil est reli dautres appareils par des cbles et connecteurs. Pour viter toute interfrence lectromagntique avec dautres appareils lectriques, tels que les postes de radio et de tlvision, utilisez des cbles et connecteurs blinds pour les liaisons. D8-10-3a_Fr AVERTISSEMENT Pour viter les risques dincendie, ne placez aucune flamme nue (telle quune bougie allume) sur lappareil. D3-4-2-1-7a_A1_Fr Ce produit est destin une utilisation domestique gnrale. Toute panne due une utilisation autre qu'
des fins prives (comme une utilisation des fins commerciales dans un restaurant, dans un autocar ou sur un bateau) et qui ncessite une rparation sera aux frais du client, mme pendant la priode de garantie. K041_A1_Fr AVERTISSEMENT : La manipulation du cordon de ce produit ou des cordons associs aux accessoires vendus avec ce produit vous expose aux produits chimiques mentionns dans la proposition 65, reconnus par ltat de Californie et par dautres entits gouvernementales comme produits cancrognes susceptibles, entre autres, de causer des anomalies congnitales et des malformations. Se laver les mains aprs utilisation D36-P4_A_Fr
1) 2) 3) 4) 5) 6) 7) 8) 9) 10) Lire attentivement ces instructions. Conserver ces instructions. Lire toutes les mises en garde. Suivre toutes les instructions. Ne pas utiliser cet appareil prs dune source deau. Ne nettoyer quavec un chiffon sec. Ne pas bloquer les vents daration. Installer lappareil selon les instructions du fabricant. Ne pas installer lappareil prs dun appareil de chauffage tel quun radiateur, une rsistance lectrique, une cuisinire ou tout dispositif mettant de la chaleur (y compris un amplificateur). Pour des raisons de scurit, ne pas modifier la fiche polarise ou celle de mise la terre. Une fiche polarise est une fiche deux lames, dont une plus large que lautre. Une fiche de mise la terre est une fiche deux lames avec une broche de masse. La lame plus large ou la broche de masse procure une protection accrue. Si ce genre de fiche ne peut tre insr dans une prise de courant, adressez-vous un lectricien pour faire remplacer la prise. Sassurer que le cordon est plac un endroit o il ne risque pas dtre pitin ou coinc et faire particulirement attention aux fiches et prises. AVERTISSEMENT Avant de brancher lappareil pour la premire, lisez attentivement la section suivante. La tension de lalimentation lectrique disponible varie selon le pays ou la rgion. Assurez-vous que la tension du secteur de la rgion o lappareil sera utilis correspond la tension requise (par ex. 230 V ou 120 V), indique sur le panneau arrire. D3-4-2-1-4*_A1_Fr Milieu de fonctionnement Temprature et humidit du milieu de fonctionnement :
De +5 C +35 C (de +41 F +95 F) ; Humidit relative infrieure 85 % (orifices de ventilation non obstrus) Ninstallez pas lappareil dans un endroit mal ventil ou un lieu soumis une forte humidit ou en plein soleil
(ou une forte lumire artificielle). D3-4-2-1-7c*_A1_Fr PRCAUTION DE VENTILATION Lors de linstallation de lappareil, veillez laisser un espace suffisant autour de ses parois de manire amliorer la dissipation de chaleur (au moins 10 cm sur le dessus, 10 cm larrire et 10 cm de chaque ct). AVERTISSEMENT Les fentes et ouvertures du coffret sont prvues pour la ventilation, pour assurer un fonctionnement stable de lappareil et pour viter sa surchauffe. Pour viter les risques dincendie, ne bouchez jamais les ouvertures et ne les recouvrez pas dobjets, tels que journaux, nappes ou rideaux, et nutilisez pas lappareil pos sur un tapis pais ou un lit. D3-4-2-1-7b*_A1_Fr 11) 12) Nutiliser que les accessoires ou priphriques recommands par le fabricant. Nutiliser lappareil quavec un chariot, meuble, trpied, support ou table recommand par le fabricant ou vendu avec lappareil. Si un chariot est utilis, le dplacer avec le plus grand soin afin dviter de le renverser. 13) 14) rparation simpose Dbrancher cet appareil en cas dorage ou sil ne doit pas tre utilis pendant longtemps. Confier lappareil un technicien qualifi pour toute rparation. Une lorsque lappareil a t endommag, par exemple lorsque le cordon dalimentation ou la fiche est endommag, du liquide a t renvers ou un objet est tomb dans lappareil, lappareil a t expos la pluie ou une humidit excessive, ou bien encore lappareil fonctionne mal ou est tomb. P1-4-2-2_Fr Si la fiche dalimentation secteur de cet appareil ne convient pas la prise secteur utiliser, la fiche doit tre remplace par une approprie. Ce remplacement et la fixation dune fiche secteur sur le cordon dalimentation de cet appareil doivent tre effectus par un personnel de service qualifi. En cas de branchement sur une prise secteur, la fiche de coupure peut provoquer une srieuse dcharge lectrique. Assurez-vous quelle est limine correctement aprs sa dpose. Lappareil doit tre dconnect en dbranchant sa fiche secteur au niveau de la prise murale si vous prvoyez une priode prolonge de non utilisation
(par exemple avant un dpart en vacances). D3-4-2-2-1a_A1_Fr ATTENTION Linterrupteur STANDBY/ON de cet appareil ne coupe pas compltement celui-ci de sa prise secteur. Comme le cordon dalimentation fait office de dispositif de dconnexion du secteur, il devra tre dbranch au niveau de la prise secteur pour que lappareil soit compltement hors tension. Par consquent, veillez installer lappareil de telle manire que son cordon dalimentation puisse tre facilement dbranch de la prise secteur en cas daccident. Pour viter tout risque dincendie, le cordon dalimentation sera dbranch au niveau de la prise secteur si vous prvoyez une priode prolonge de non utilisation (par exemple avant un dpart en vacances). D3-4-2-2-2a*_A1_Fr
AVERTISSEMENT Cet appareil nest pas tanche. Pour viter les risques dincendie et de dcharge lectrique, ne placez prs de lui un rcipient rempli deau, tel quun vase ou un pot de fleurs, et ne lexposez pas des gouttes deau, des claboussures, de la pluie ou de lhumidit. D3-4-2-1-3_A1_Fr
(Exemples de marquage pour les batteries) Ces symboles ne sont valables que dans les pays de lUnion Europenne. Pb K058c_A1_Fr Ce produit contient du mercure. La mise au rebut de cette matire peut tre soumise une rglementation spciale pour la protection de lenvironnement. Pour la mise au rebut ou le recyclage de cette matire, veuillez contacter les autorits locales ou lAlliance des Industries lectroniques : www.eiae.org. K057_Fr NOTE IMPORTANTE SUR LE CABLE DALIMENTATION Tenir le cble dalimentation par la fiche. Ne pas dbrancher la prise en tirant sur le cble et ne pas toucher le cble avec les mains mouilles. Cela risque de provoquer un court-circuit ou un choc lectrique. Ne pas poser lappareil ou un meuble sur le cble. Ne pas pincer le cble. Ne pas faire de noeud avec le cble ou lattacher dautres cbles. Les cbles dalimentation doivent tre poss de faon ne pas tre crass. Un cble abm peut provoquer un risque dincendie ou un choc lectrique. Vrifier le cble dalimentation de temps en temps. Contacter le service aprs-vente PIONEER le plus proche ou le revendeur pour un remplacement. S002*_A1_Fr Fabriqu sous licence de Dolby Laboratories. Les termes Dolby et Pro Logic , ainsi que le sigle double D sont des marques commerciales de Dolby Laboratories. Fabriqu sous licence sous couvert des brevets U.S. N : 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,226,616; 6,487,535;
7,003,467; 7,212,872 et dautres brevets U.S. et mondiaux, mis et en cours denregistrement. DTS, DTS Digital Surround, ES et Neo:6 sont des marques commerciales dposes et les logos et le symbole DTS et DTS 96/24 sont des marques commerciales de DTS, Inc. 1996-2008 DTS, Inc. Tous droits rservs.
Nous vous remercions davoir achet ce produit Pioneer. Veuillez lire attentivement ce mode demploi afin dapprendre utiliser votre modle correctement. Lorsque vous avez termin, rangez ces instructions en lieu sr afin de pouvoir vous y rfrer lavenir. Sommaire Guide dinstallation Contenu de lemballage . 6 Installation . 6 Connexions . 7 Dmarches de base . 7 01 Installation Avant la mise en service. 8 Pairage de lunite principale et du caisson de basses . 8 propos de lemplacement de ce systme . 9 Prparation du caisson de basses . 10 Installation de lunit principale sur une paroi. 10 Remarques complementaires sur la disposition du systme. 11 02 Connexions Lors du branchement des cbles . 12 Cbles HDMI . 12 Cbles audio numriques . 13 Connexion votre tlviseur (pour sons tlviss) . 13 Branchement du tlviseur et des composants de lecture. 14 Connexion au moyen de linterface HDMI. 14 Branchement dun composant sans borne HDMI. 14 Branchement du systme . 15 03 Commandes et affichages Panneau avant . 16 Affichage . 16 Caisson de basses . 17 Tlcommande . 18 Mise en place des piles dans la tlcommande. 20 Utilisation de la tlcommande . 20 04 coute de votre systme Dmarches de base. 21 Lecture en mode Auto . 21 coute de sonorits dambiance . 22 Utilisation des effets Surround Avancs . 22 coute en stro . 23 Utilisation de Front Stage Surround Advance . 23 Utilisation des modes Stream Direct . 24 Rglage des options audio . 24 05 Commande des autres fonctions du systme Prparation de la tlcommande pour grer dautres composants . 27 Slection des codes de prrglage pour tlviseurs . 27 Slection des codes de prrglage pour autres composants . 27 Suppression de tous les rglages de la tlcommande . 28 Commandes pour tlviseurs . 28 Commandes pour autres composants. 29 Liste des codes de prrglage . 31 06 Informations complmentaires Guide de dpannage . 34 HDMI . 35 Information importante relative la connexion HDMI . 36 Prcautions lemploi du caisson de basses sans fil . 37 Prcautions relatives la longueur donde. 37 Plage dutilisation . 38 Rflexion des signaux . 38 En vue dune utilisation sre . 38 Rinitialisation de lunit principale. 39 Caractristiques techniques . 39 Unit principale. 39 Caisson de basses sans fil . 39 Nettoyage de lappareil . 40 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 5 Fr
Guide dinstallation Contenu de lemballage Assurez-vous que tous les articles suivants sont prsents. Unit principale Adaptateur secteur Cordon dalimentation
(pour caisson de basses) x1 Cordon dalimentation
(pour adapteur secteur) x1 Caisson de basses sans fil SYSTEM SYSTEM INPUT SOURCE Piles
(taille AAA, IEC R03) x2 Appliques (pour unit principale) x2 Gabarit pour montage sur paroi Coussinets antidrapants (pour caisson de basses) x4 Mode demploi
(Ce document) 10 Disponible dans le commerce INPUT HDMI1 HDMI2 TV CONTROL OPTICAL COAXIAL INPUT CH STANDARD ADV SURR TV CODE AUTO/
DIRECT STEREO/
A.L.C. DIMMER VOL LISTENING MODE BD MENU ENTER MUTE DISPLAY CH CH ENTER SURROUND SYSTEM Tlcommande Installation 6 Fr
Connexions OPTICAL AUDIO OUT HDMI IN HDMI OUT DC IN 24V OPTICAL AUDIO HDMI OPTICAL COAXIAL AUDIO IN OUT IN 1 IN 2 SYSTEM SYSTEM INPUT SOURCE INPUT HDMI1 HDMI2 TV CONTROL Rouge Vert Dmarches de base Allumez ENTER SYSTEM SYSTEM INPUT SOURCE Allumez TV CONTROL HDMI INPUT HDMI1 HDMI2 OPTICAL COAXIAL INPUT CH IN 1 STANDARD ADV SURR TV CODE AUTO/
DIRECT STEREO/
A.L.C. DIMMER VOL LISTENING MODE BD MENU 27 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 7 Fr
01 Installation Chapitre 1 Installation Avant la mise en service Avant dinstaller lappareil et deffectuer les connexions dautres composants, assurez-
vous que lunit principale et le caisson de basses prennent correctement en compte les communications sans fil. Placez lunit principale et le caisson de basses ct lun de lautre. Les cordons dalimentation fournis pour le caisson de basses et ladaptateur secteur sont dots de connecteurs diffrents. Comme indiqu sur lillustration, vrifiez la forme de la fiche brancher sur la prise secteur lorsque vous effectuez les connexions. Notez que le cordon dalimentation de ladapteur secteur se trouve dans la mme bote que ladaptateur secteur proprement dit. 1 Branchez ladaptateur secteur fourni sur la prise DC IN larrire de lappareil. 2 Branchez le cordon dalimentation fourni dans ladapteur secteur, puis branchez lautre bout du cordon dans une prise de courant. 3 Branchez le cordon dalimentation fourni dans la prise AC IN larrire du caisson de basses, puis branchez lautre bout du cordon dans une prise de courant. 4 Appuyez sur STANDBY/ON sur lunit principale. Confirmez que les voyants sur lunit principale et le caisson de basses sallument en vert. Si un des voyants ne sallume pas en vert, effectuez le pairage (voir ci-dessous). Aprs avoir confirm la communication entre les deux appareils, dbranchez les cordons dalimentation, puis effectuez les dmarches dinstallation et les branchements. Pour le caisson de basses Pour ladaptateur secteur Pairage de lunite principale et du caisson de basses SYSTEM SYSTEM INPUT SOURCE DC IN 24V OPTICAL COAXIAL AUDIO IN OUT Unit principale une prise secteur Adaptateur secteur Caisson de basses 8 Fr INPUT HDMI1 HDMI2 TV CONTROL STANDBY/ON INPUT STEREO/A.L.C. OPTICAL COAXIAL INPUT CH ENTER 1 Aprs avoir termin le barnchement de ladaptateur secteur et du cordon dalimentation, appuyez sur STANDBY/ON de lunit principale (voir ci-avant). 2 Appuyez sur tlcommande. de la
Installation Tout en maintenant enfonc la touche 3 STEREO/A.L.C. de lunit principale, appuyez simultanment sur les touches SHIFT et TV CONTROL CH de la tlcommande. Le voyant du caisson de basses sallume en vert et le pairage de lunit principale et du caisson de basses est ainsi termin. propos de lemplacement de ce systme Attention Lors de linstallation du systme, posez-le plat sur son flanc pour viter des accidents ou des blessures. Veillez utiliser une surface stable lors de lassemblage, de linstallation et de la disposition du systme. Ce systme vous permet de bnficier des sons surround 3.1 voies, simplement en installant lunit principale et le caisson de basses. Pour obtenir des performances audio optimales, placez lunit principale sous le moniteur de tlvision. Le caisson de basses capte les signaux audio de lunit principale sans recourir des fils, ce qui vite les cbles denceintes et vous permet de le placer lendroit le plus pratique (bien entendu, le branchement dun cordon dalimentation reste ncessaire). Important Prcautions relatives linstallation du caisson de basses :
Ne placez pas derrire le caisson de basses des objets qui obstrueraient ses orifices de ventilation. Il peut arriver que le son du caisson de basses soit interrompu du fait des mauvaises conditions du signal, mais il ne sagit pas dune dfaillance de lappareil. Si ceci se produit, modifiez la position et lorientation de lunit principale et/ou du caisson de basses selon les besoins. Le caisson de basses est conu pour fonctionner une distance de moins de 10 m de lunit principale. Toutefois, il se peut que, selon lenvironnement et lagencement du local dans lequel ils sont utiliss, la distance relle entre les deux lments doive tre plus rduite. Il se peut que la rception du signal par le caisson de basses soit instable sil est plac trop prs de lunit principale. Dans ce cas, loignez le caisson de basses dau moins 1 m par rapport lunit principale. La rception du signal par le caisson de basses peut tre interrompue si un obstacle (porte mtallique, mur de bton, isolation couverte daluminium) se trouve entre lui et lunit principale. Dans ce cas, installez le caisson de basses un endroit sans obstacle entre lui et lunit principale. Unit principale Caisson de basses 01 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 9 Fr
01 Installation Prparation du caisson de basses Fixez les coussinets antidrapants sur la base du caisson de basses. Utilisez ladhsif fourni pour fixer quatre coussinets sur la base du caisson de basses. Le caisson de basses a t conu pour fonctionner normalement en tant plac sur son ct comme illustr. En cas dinstallation verticale, fixez les coussinets antidrapants sur son ct comme indiqu sur lillustration. Lors dune installation verticale Logo de Pioneer Installation de lunit principale sur une paroi Au besoin, lunit principale peut tre monte sur une paroi. Avant deffectuer ce montage, consultez page 12 et effectuez les connexions des cbles. Attention Sachez que lunit principale est pesante et que son poids peut entraner le dtachement des vis bois ou larrachement du matriau auxquels elles sont fixes, ce qui provoquerait sa chute. Assurez-vous que la paroi sur laquelle vous 10 Fr voulez fixer lunit principale soit assez resistante pour la supporter. Ne linstallez pas sur une surface en contreplaqu ou sur une paroi friable. Si vous hsitez quant la rsistance des matriaux, demandez conseil un professionnel. Pioneer nest pas responsable en cas daccident ou de dgts qui rsulteraient dune installation, dune utilisation ou dune modification inapproprie du produit ou en cas de dsastres naturels. Des vis de montage et des rondelles ne sont pas fournies. Utilisez des vis appropries au matriau de la paroi et pouvant rsister au poids de lunit. Les dimensions recommandes sont de 4 mm de diamtre et de 50 mm de longueur pour la vis et de 10 mm de diamtre pour la rondelle. Vis (non fournie) :
maximum 10 mm 50 mm 4 mm Rondelle (non fournie) :
10 mm 1 Collez le gabarit de montage sur paroi fourni lendroit de linstallation. Fixez le gabarit lhorizontale du sol en vous servant dun ruban adhsif. Assurez-vous que le gabarit est angle droit pour viter que lunit ne soit installe de travers. Si le gabarit est plac trop prs du tlviseur, celui-ci peut gner lunit principale lors de son installation. Assurez-vous que le gabarit et le tlviseur ne chevauchent pas.
Installation DC IN 24V COAXIAL OPTICAL AUDIO IN HDMI OUT IN 1 IN 2 Gabarit Fixez lapplique lendroit spcifi sur le 2 gabarit. Alignez les appliques aux endroits spcifis sur le gabarit et fixez-les avec les deux vis commme illustr. Ajustez la position de fixation de lapplique de sorte quelle soit aligne avec le gabarit. Aprs avoir fix les appliques gauche et droite, enlevez le gabarit. Vis et rondelle
(non fournies) Gabarit Applique Suspendez lunit principale aux 3 appliques. Alignez les deux orifices de fixation sur larrire de lunit principale avec les vis de montage exposes de lapplique et suspendez lunit principale sur les vis, comme illustr. Confirmez que les vis arrivent parfaitement au sommet des orifices de montage. Remarques complementaires sur la disposition du systme Prcautions:
Si vous installez lunit principale sur le tlviseur, veillez limmobiliser avec une bande adhsive ou de faon approprie. Sinon lunit princiaple risque de tomber du tlviseur la suite de chocs externes ou dun sisme, ce qui pourrrait blesser les personnes proximit et endommager lunit principale proprement dite. Lunit principale est magntiquement blinde. Toutefois, selon lendroit dinstallation, une distorsion des couleurs peut se produire si lunit principale est place tout prs de lcran dun tlviseur. Si ceci se produit, mettez le tlviseur hors tension, puis remettez-le sous tension environ 15 minutes 30 minutes plus tard. Si le problme subsiste, loignez lunit principale par rapport au tlviseur. Le caisson de basses ntant pas blind magntiquement, ne le placez pas proximit dun tlviseur ou dun moniteur. Ne placez pas des supports de mmorisation magntique (tels que disquettes, des bandes ou des cassettes vido) proximit du caisson de basses. Ne fixez pas le caisson de basses sur une paroi ou au plafond. Ils pourraient causer des blessures en tombant. 01 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 11 Fr
02 Connexions Chapitre 2 Connexions Lors du branchement des cbles Veillez ne pas cheminer les cbles sur le dessus de cet appareil. Si cest le cas, le champ magntique produit par les transformateurs de lappareil risque de provoquer un ronflement via les enceintes. Attention Lors du branchement de cet appareil ou avant de changer ses connexions, coupez linterrupteur dalimentation et dbranchez le cordon dalimentation au niveau de la prise secteur. Toutes les connexions tant termines, branchez le cordon dalimentation sur la prise secteur. Cbles HDMI Les cbles HDMI transmettent les signaux vido numriques non compresss, ainsi que la plupart des types de signaux audio numriques avec lesquels le composant est compatible, notamment DVD-vido, DVD-
Audio, Dolby Digital Plus, Dolby TrueHD, DTS-
HD Master Audio (reportez-vous les limitations ci-dessous), Vido CD/Super VCD, CD, SACD (DSD 2 voies seulement) et PCM 192 kHz/8 voies (nombre maximum dentres).1 Veillez connecter les bornes dans le sens correct. propos de HDMI La norme HDMI (High Definition Multimedia Interface) prend en charge via une seule connexion numrique la fois les signaux audio et vido, pour une utilisation avec des appareils externes tels que lecteurs DVD, tlviseurs numriques, ou autres appareils audiovisuels. Cette norme a t cre pour fournir des spcifications communes aux normes HDCP (High Bandwidth Digital Content Protection) et DVI (Digital Visual Interface). La norme HDCP est utilise pour garantir la protection des donnes numriques envoyes et reues par les moniteurs compatibles DVI. La norme HDMI, quant elle, prend en charge la vido standard, amliore ou haute dfinition, ainsi que laudio standard et le son dambiance multicanaux (surround). Les spcifications de la norme HDMI incluent notamment la vido numrique non compresse, une largeur de bande allant jusqu 2,2 giga-octets par seconde (pour un signal HDTV), un connecteur unique ( la place de plusieurs cbles et connecteurs), et la capacit de communication entre une source audiovisuelle et des appareils audiovisuels externes tels que des tlviseurs numriques. Ce systme est compatible galement avec la fonction DeepColor and x.v.Color (x.v.Color est une marque commerciale de Sony Corporation). Remarque 1 Rglez le paramtre HDMI sous Rglage des options audio page 24 sur THRU (THROUGH) si vous souhaitez couter la sortie audio HDMI par votre tlviseur ou votre cran plat (aucun son ne provient alors de ce systme). Si le signal vido napparat pas sur votre tlviseur ou votre cran plat, essayez dajuster la rsolution sur votre composant ou laffichage. Sachez que certains composants (tels que consoles de jeu vido) ont une rsolution quil nest pas possible dafficher. Dans ce cas, utilisez une mthode diffirente de HDMI pour raccorder votre tlviseur lautre composant. Quand le signal vido de HDMI est 480i, 480p, 576i ou 576p, les sons PCM multi-voies et les sons HD ne peuvent pas tre reus. 12 Fr
Connexions HDMI, le logo HDMI et High-Definition Multimedia Interface sont des marques commerciales ou des marques dposes de HDMI Licensing, LLC. Important En comparaison des formats existants
(optique et coaxial) de transmission des sons numriques, un temps plus long est ncessaire pour reconnatre les transmissions de sons numriques en format HDMI. Cest pourquoi, des interruptions du son peuvent se produire lors du changement de format ou au dbut de la lecture. En outre, la mise sous/hors tension du composant raccord la borne HDMI OUT de cet appareil ou le branchement/
dbranchement du cble HDMI peut tre la cause de parasites ou dune interruption des sons. Cbles audio numriques Des cbles audio numriques coaxiaux ou des cbles optiques, disponibles dans le commerce, doivent tre utiliss pour le branchement de composants numriques sur ce systme.1 Cble audio numrique coaxial Connexion votre tlviseur
(pour sons tlviss) Cette connexion vous permet de restituer les sons, provenant du tuner incorpor au tlviseur. Des tlviseurs sans connecteurs de sortie audio numrique nepeuvent pas tre raccords cet appareil. Raccordez la sortie numrique optique de votre tlviseur sur la prise OPTICAL AUDIO IN de ce systme.2 Utilisez un cble optique. Si votre tlviseur possde une sortie numrique coaxiale, vous pouvez galement utilisez un cble audio numrique coaxial pour le branchement. Choisir une connexion DIGITAL OUT OPTICAL COAXIAL Tlviseur Cble optique OPTICAL COAXIAL AUDIO IN OUT Remarque 1 Lors de linsertion de la fiche des cbles optiques, veillez ne pas abmer le volet protgeant la prise optique. Lors du rangement dun cble optique, enroulez-le de faon lche. Le cble pourrait tre endommag sil est pli un angle rduit. Vous pouvez aussi faire appel un cble vido RCA pour la connexion numrique coaxiale. 2 Lors du branchement de ce systme un priphrique de lecture via un tlviseur, il se peut que, dans certains cas, les sons ne soient pas disponibles la sortie audio numrique du tlviseur. Dans ce cas, branchez ce systme directement sur le priphrique de lecture. 02 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 13 Fr
02 Connexions Branchement du tlviseur et des composants de lecture Connexion au moyen de linterface HDMI Si vous avez un composant quip pour HDMI ou DVI (avec HDCP) (lecteur de disque Blu-ray, etc.), vous pourrez le raccorder ce systme au moyen dun cble HDMI, disponible dans le commerce. Branchement dun composant sans borne HDMI Ce schma illustre les connexions ce systme dun tlviseur et dun lecteur DVD
(ou dun autre composant de lecture), ne disposant pas dune borne HDMI. HDMI IN Tlviseur ou tlviseur cran plat compatible HDMI/DVI 2 HDMI OUT IN 1 IN 2 1 Tlviseur 2 OPTICAL COAXIAL AUDIO IN OUT 1 Cble vido OPTICAL COAXIAL DIGITAL OUT Choisir une connexion Lecteur DVD, etc. 1 Raccordez la sortie numrique coaxiale de votre lecteur DVD sur la prise COAXIAL AUDIO IN de ce systme. Utilisez un cble audio numrique coaxial. Si votre lecteur DVD possde une sortie numrique optique, vous pouvez galement utiliser un cble audio numrique optique pour le branchement. HDMI OUT Composant quip pour HDMI/DVI 1 Branchez la sortie HDMI de votre lecteur BD/DVD sur lentre HDMI IN1 de ce systme. Utilisez un cble HDMI pour cette connexion. Branchez la sortie HDMI OUT de ce systme 2 sur une entre HDMI de votre tlviseur. 2 Branchez la sortie vido de votre lecteur DVD sur lentre vido de votre tlviseur. 14 Fr
Connexions Branchement du systme Ne raccordez le systme au secteur quaprs y avoir connect tous les composants. DC IN 24V OPTICAL COAXIAL AUDIO IN Adaptateur secteur OUT Unit principale une prise secteur Caisson de basses Unit principale :
1 Branchez ladaptateur secteur fourni sur la prise DC IN larrire de lappareil. 2 Branchez le cordon dalimentation fourni dans ladapteur secteur, puis branchez lautre bout du cordon dans une prise de courant. Caisson de basses :
Branchez le cordon dalimentation fourni dans la prise AC IN larrire du caisson de basses, puis branchez lautre bout du cordon dans une prise de courant. ATTENTION Tenez le cordon dalimentation par sa prise. Ne dbranchez pas lappareil en tirant sur le cordon et ne touchez jamais le cordon dalimentation avec les mains mouilles ; vous pourriez provoquer un court-circuit ou subir un choc lectrique. Ne placez pas lappareil, un meuble ou tout autre objet sur le cordon dalimentation et vitez de le pincer de toute autre manire. Ne faites jamais de noeud dans le cordon et ne le liez jamais avec dautres cbles. Les cordons dalimentation doivent tre achemins de faon ce quon ne puisse pas les pitiner. Un cordon dalimentation endommag peut provoquer un incendie ou un choc lectrique. Vrifiez ltat du cordon de temps autre. Si le cordon est endommag, demandez-en le remplacement auprs du service aprs-
vente agr Pioneer le plus proche. Nutilisez pas un cordon dalimentation autre que celui qui est fourni avec cet appareil. Nutilisez pas le cordon dalimentation fourni dautres fins que le branchement ce systme. Lorsque le systme ne sera pas utilis durant une longue priode (par ex. pendant les vacances), il est recommand de le dbrancher, en retirant la fiche du cordon secteur. Nutilisez aucun adaptateur secteur autre que celui qui est recommand pour viter tout risque dincendie ou de secousse lectrique. Ladaptateur secteur fourni est conu pour fonctionner uniquement avec cet appareil. Nessayez jamais de lutiliser avec un autre dispositif pour lequel il nest pas conu, car ceci pourrait provoquer un incendie ou une secousse lectrique. 02 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 15 Fr
03 Commandes et affichages Chapitre 3 Commandes et affichages Panneau avant 1 2 3 STANDBY/ON INPUT STEREO/A.L.C. VOLUME 4 5 6 7 1 Voyant de transmission sans fil Sallume en rouge ou en vert, selon ltat de lappareil. Mode Veille : Sallume en rouge Allum, pas de transmission sans fil
(fonctionnement du caisson de basses) :
Sallume en rouge Allum, avec transmission sans fil
(fonctionnement du caisson de basses) :
Sallume en vert Affichage 2 Capteur de tlcommande infrarouge 3 Affichage du panneau avant Pour plus de dtails, reportez-vous Affichage ci-dessous. 4 STANDBY/ON Met le systme sous tension ou en veille. INPUT 5 Pour choisir une source dentre. STEREO/A.L.C. 6 Permet de passer entre Lecture stro, le mode stro contrle automatique de niveau
(page 23) et les modes Front Stage Surround Advance (page 23). 7 VOLUME +/
Cette touche ajuste le volume. 1 2 3 4 5 6 7 8 7 9 1 AUTO Sallume lorsque la fonction Auto Surround est en service (page 21). Indicateur de retard sonore 3 Il affiche ltat du retard sonore de Audio Parameter. 2 Affichage alphanumrique Il fournit diverses informations sur le systme. 16 Fr
Commandes et affichages 4 Voyants DTS DTS Sallume quand est dtecte une source, comportant des signaux audio codage DTS. ES Sallume quand est dtecte une source, comportant des signaux audio codage DTS-ES. 96/24 Sallume quand est dtecte une source, comportant des signaux audio codage DTS 96/24. NEO:6 Quand un des modes NEO:6 du systme est en service, ce voyant sallume pour signaler un traitement NEO:6 (page 22). 5 Voyants Dolby Digital 2D Sallume quand est dtect un signal codage Dolby Digital. 2D+
Sallume quand est dtecte une source, comportant des signaux audio codage Dolby Digital Plus. 2HD Sallume quand est dtecte une source, comportant des signaux audio codage Dolby TrueHD. EX Sallume quand est dtecte une source, comportant des signaux audio codage Dolby Digital EX. 2PLll Sallume pour indiquer un dcodage 2 Pro Logic II (reportez-vous coute de sonorits dambiance page 22 pour un complment dinformations ce sujet). 6 ADV.S. Sallume quand un des modes Advanced Surround a t slectionn (reportez-vous Utilisation des effets Surround Avancs page 22 pour un complment dinformations ce sujet). 7 Voyants SIGNAL SELECT DIGITAL Sallume quand un signal audio numrique est slectionn. Clignote quand un signal audio numrique nest pas slectionn. HDMI Sallume quand un signal HDMI est slectionn. Clignote quand un signal HDMI nest pas slectionn. 8 Voyant de gradateur dclairage Sallume quand la fonction DIMMER
(gradateur dclairage) est hors service. 9 DIR. Sallume quand le mode DIRECT ou PURE DIRECT est mis en service (page 24). Caisson de basses 1 1 Voyant de transmission sans fil Mode Veille : Sallume en rouge Fonctionnement du caisson de basses :
Sallume en vert 03 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 17 Fr
03 Commandes et affichages Tlcommande INPUT SELECT 3 Pour slectionner la source dentre. 4 SOURCE Appuyez pour mettre sous/hors tension dautres composants raccords au systme
(reportez-vous page 29 pour plus de renseignements ce sujet). Touches INPUT SELECT 5 Pour slectionner la source dentre. Fait permuter la tlcommande pour contrler tout autre compos attribu aux touches choisies
(reportez-vous Commande des autres fonctions du systme page 27). Touches TV CONTROL 6 Ces touches sont rserves au contrle du tlviseur, affect la touche
. Par consquent, si vous navez quun tlviseur raccorder ce systme, affectez-le la touche
(reportez-vous page 28 pour plus dinformations ce sujet).
Pour mettre le tlviseur sous tension ou hors tension. INPUT Pour slectionner le signal dentre de tlvision. Appuyez pour slectionner le contrle du tlviseur. Utilisez aussi pour saisir un code prrgl, allou la touche TV CONTROL. CH +/
Utilisez pour slectionner les canaux. VOL +/
Pour ajuster le volume sonore de votre tlviseur. 3 4 6 8 11 13 15 16 1 2 5 7 9 10 12 14 SYSTEM SYSTEM INPUT SOURCE INPUT HDMI1 HDMI2 TV CONTROL OPTICAL COAXIAL INPUT CH STANDARD ADV SURR TV CODE AUTO/
DIRECT STEREO/
A.L.C. DIMMER VOL LISTENING MODE BD MENU ENTER MUTE DISPLAY CH CH ENTER SURROUND SYSTEM 1 SYSTEM Pour mettre le systme sous tension ou en mode Veille. 2 Fait permuter la tlcommande pour contrler le systme. Cette touche sert aussi ajuster les paramtres audio (page 24). 18 Fr
Commandes et affichages 7 Touches de mode dcoute AUTO/DIRECT Pour permuter entre la lecture en mode Auto Surround (Lecture en mode Auto page 21) et en Stream Direct. La lecture Stream Direct contourne les commandes de tonalit pour assurer une reproduction plus prcise dune source (page 24). STEREO/A.L.C. Permet de passer entre Lecture stro, le mode stro contrle automatique de niveau (page 23) et les modes Front Stage Surround Advance (page 23). STANDARD Appuyez pour un dcodage Standard et pour commuter entre les options 2 Pro Logic II (page 22). ADV SURR Permute entre les divers modes Surround
(page 22). 8 DIMMER Attnue ou accentue la luminosit de laffichage. La luminosit peut sajuster selon 4 paliers. Utilisez dabord la touche INPUT SELECT pour slectionner lentre pour le lecteur de disque Blu-ray raccord, puis accdez au point suivant :
BD MENU Affiche le menu des disques Blu-ray. HOME MENU Affiche lcran HOME MENU. RETURN Pour confirmer et quitter lcran de menu actuel. MENU Affiche lcran de menu TOOLS (outils) du lecteur de disque Blu-ray. 10 , ENTER Utilisez les touches flches pour rgler votre systme de son surround (page 24). Elles permettent aussi de commander les menus/
options BD/DVD. 11 MASTER VOLUME +/
Utilisez pour ajuster le volume. 12 Touches de commande des composants Les touches principales (, , etc.) servent contrler un composant aprs lavoir slectionn au moyen des touches de source dentre. Laccs aux commandes au-dessus de ces touches est possible aprs que vous avez actionn la touche de source dentre correspondante. Ces touches fonctionnent aussi comme expliqu ci-aprs. Appuyez dabord sur pour avoir accs :
ANT Permet de slectionner les antennes VHF/
UHF ou le tlviseur cbl. 03 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s Touches de contrle de systme et de 9 composant Appuyez dabord sur pour avoir accs :
AUDIO PARAMETER Utilisez pour avoir accs aux options Audio
(page 24). RETURN Pour confirmer et quitter lcran de menu actuel. Utilisez dabord la touche INPUT SELECT pour slectionner lentre pour le composant raccord, puis accdez au point suivant :
TOP MENU Affiche le menu top dun disque BD/DVD. 13 MUTE Pour activer/dsactiver la mise en sourdine du son. 14 Touches numriques et autres commandes de composants Utilisez les touches numriques pour saisir directement les plages sur un CD, un DVD, etc. P y c c HDD*, DVD*, VCR*
Ces touches permettent de naviguer entre les commandes du disque dur, du DVD et du VCR pour les enregistreurs HDD/DVD/VCR. 19 Fr
03 Commandes et affichages 15 DISPLAY Fait passer lcran de cet appareil. Vous pouvez alors vrifier le nom de lentre, le mode dcoute ou le volume sonore en slectionnant une source dentre. 16 SHIFT Appuyez pour accder aux commandes encadres (situes au-dessus des touches) de la tlcommande. Ces touches sont signales par un astrisque (* ) dans cette section. Mise en place des piles dans la tlcommande Nutilisez pas et ne rangez pas des piles en plein soleil ou dans un endroit extrmement chaud, comme lintrieur dune voiture ou prs dun appareil de chauffage. Un tel environnement pourrait provoquer un suintement des piles, leur surchauffe, leur explosion ou un incendie. Ceci pourrait aussi rduire la dure de vie et les performances des piles. Utilisation de la tlcommande 30 30 7 m Attention Une insertion incorrecte des piles peut entraner des dangers, comme une fuite de leur lectrolyte ou leur clatement. Observez les points suivants :
Nutilisez pas ensemble des piles neuves et usages. Nutilisez pas simultanment diffrents types de pilesdeux piles daspect similaire peuvent diffrer par leur tension nominale. Assurez-vous que les ples positif et ngatif de chaque pile correspondent aux indications lintrieur du logement. Retirez les piles de lappareil si vous prvoyez de ne pas lutiliser pendant plus dun mois. Lorsque vous liminez des piles usages, respectez les rglementations gouvernementales et autres instructions relatives lenvironnement, applicables dans votre pays ou votre rgion. Gardez les points suivants lesprit quand vous utilisez la tlcommande. Assurez-vous quaucun obstacle ne se trouve entre la tlcommande et le capteur de ses signaux sur lappareil. Le fonctionnement de la tlcommande peut devenir instable si une forte lumire ou une lampe fluorescente brille sur le capteur des signaux de tlcommande sur lappareil. Les tlcommandes dautres appareils peuvent interfrer les unes sur les autres. Evitez dutiliser la tlcommande dautres quipements situs proximit de cet appareil. Remplacez les piles quand vous constatez une baisse de la porte de la tlcommande. Utilisez dans la plage de fonctionnement en face du capteur de tlcommande sur lappareil, comme illustr ici. 20 Fr
coute de votre systme Chapitre 4 coute de votre systme Important Les modes dcoute et de nombreuses fonctions dcrites dans la prsente section peuvent ne pas tre disponibles en fonction de la source, des paramtres et de ltat actuel du systme. Lancez la lecture sur le composant 4 slectionn ltape 1. Slectionnez un mode dcoute. 5 Utilisez les touches de mode dcoute. 6 Appuyez sur MASTER VOLUME +/ pour ajuster le volume. Dmarches de base Dmarches pour lcoute de sons provenant du composant raccord. SYSTEM SYSTEM INPUT SOURCE Lecture en mode Auto La fonction Auto Surround est loption dcoute la plus directe et la plus simple. Grce cette fonction, lappareil dtecte automatiquement le type de source que vous coutez et il slectionne un mode de lecture multivoies ou stro selon les besoins.1 INPUT HDMI1 HDMI2 TV CONTROL ENTER OPTICAL COAXIAL INPUT CH STANDARD ADV SURR TV CODE AUTO/
DIRECT STEREO/
A.L.C. DIMMER VOL LISTENING MODE BD MENU ANT MUTE 1 Mettez sous tension le composant utiliser pour la lecture. 2 Appuyez sur SYSTEM pour mettre ce systme sous tension. Slectionnez la source reproduire. 3 Utilisez les touches INPUT SELECT (ou INPUT du panneau avant). STANDARD ADV SURR TV CODE AUTO/
DIRECT STEREO/
A.L.C. DIMMER VOL LISTENING MODE BD MENU Au moment dcouter une source, appuyez sur AUTO/DIRECT2 pour lancer la lecture de la source en mode auto. Appuyez sur cette touche plusieurs fois jusqu ce que AUTO SURROUND saffiche brivement (le format de dcodage ou de lecture apparatra ensuite). Vrifiez les indicateurs de format numrique sur lafficheur pour suivre le traitement de la source. Remarque 1 Les formats Stro Surround (matriciel) sont dcods au moyen de NEO:6 CINEMA ou DOLBY PLII MOVIE (reportez-
vous coute de sonorits dambiance ci-dessus pour plus de dtails sur les formats de dcodage). 2 Pour dautres options utilisant cette touche, consultez la section Utilisation des modes Stream Direct page 24. 04 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 21 Fr
04 coute de votre systme coute de sonorits dambiance Ce systme permet dcouter nimporte quelle source en son surround. Cependant, les options disponibles dpendront de la configuration de vos enceintes et du type de source que vous coutez. Les modes suivants offrent un son surround de base pour les sources stro et multicanaux. STANDARD ADV SURR TV CODE AUTO/
DIRECT STEREO/
A.L.C. DIMMER VOL LISTENING MODE BD MENU Pendant lcoute dune source, appuyez sur STANDARD. Si la source prsente un codage Dolby Digital, DTS ou Dolby Surround, le format de dcodage adquat sera automatiquement slectionn et apparatra sur laffichage. Les options suivantes sont disponibles avec les sources deux canaux :
DOLBY PLII MOVIE Convient aux sources cinmatographiques. DOLBY PLII MUSIC1 Convient aux sources musicales. DOLBY PLII GAME Convient aux jeux vido. NEO:6 CINEMA Convient aux sources cinmatographiques. NEO:6 MUSIC Convient aux sources musicales2. DOLBY PRO LOGIC Efficae pour les sources stro codes avec Dolby Surround. Utilisation des effets Surround Avancs La fonction Surround Avanc permet de crer diffrents effets surround. Essayez diffrents modes sur diffrentes bandes sonores pour dterminer le mode que vous prfrez. STANDARD ADV SURR TV CODE AUTO/
DIRECT STEREO/
A.L.C. DIMMER VOL LISTENING MODE BD MENU Appuyez plusieurs reprises sur ADV SURR pour slectionner un mode dcoute. ACTION Conu pour les films daction avec des pistes sonores dynamiques. DRAMA Convient aux films comportant beaucoup de dialogues. ENT.SHOW Convient pour la reproduction de sources musicales. ADVANCED GAME Convient pour les jeux vido. SPORTS Convient pour les programmes sportifs. CLASSICAL Permet de recrer le son dune grande salle de concert. ROCK/POP Reproduit lambiance live pour la musique pop et/ou rock. UNPLUGGED Convient aux sources musicales acoustiques. EXT.STEREO Donne un son multicanaux une source stro, en utilisant toutes vos enceintes. Remarque 1 Lors de lcoute de sources 2 canaux en mode DOLBY PLII MUSIC, vous pouvez rgler trois paramtres supplmentaires C.WIDTH, DIMEN. et PNRM.. Reportez-vous Rglage des options audio page 24 pour les rgler. 2 lcoute de sources 2 canaux en mode NEO:6 CINEMA ou NEO:6 MUSIC, vous pouvez aussi ajuster leffet C.IMG
(reportez-vous Rglage des options audio page 24). 22 Fr
coute de votre systme coute en stro Lorsque vous slectionnez STEREO, la source est seulement reproduite par les enceintes avant droite et gauche (et ventuellement par votre caisson de basses (subwoofer) selon vos rglages denceintes). Les sources multicanaux Dolby Digital et DTS sont remixes en stro. En mode stro Auto level control (A.L.C.), cet appareil galise les niveaux sonores de lecture si chaque niveau sonore varie avec la source musicale enregistre dans un lecteur audio portable. STANDARD ADV SURR TV CODE AUTO/
DIRECT STEREO/
A.L.C. DIMMER VOL LISTENING MODE BD MENU Pendant lcoute dune source stro, appuyez sur STEREO/A.L.C. pour une lecture en stro. Appuyez de faon rpte pour naviguer entre :
STEREO Le son est reproduit selon vos rglages surround et vous pouvez toujours utiliser les fonctions Midnight, Loudness, Phase Control et Sound Retriever. A.L.C. coute en mode de contrle automatique du niveau. F.S.S.ADVANCE Reportez-vous Utilisation de Front Stage Surround Advance ci-dessous pour plus dinformations. Utilisation de Front Stage Surround Advance La fonction Front Stage Surround Advance vous permet de crer des effets sonores naturels de type surround en utilisant seulement les enceintes avant et le caisson de basses (subwoofer). STANDARD ADV SURR TV CODE AUTO/
DIRECT STEREO/
A.L.C. DIMMER VOL LISTENING MODE BD MENU Pendant lcoute dune source, appuyez sur STEREO/A.L.C. pour slectionner les modes Front Stage Surround Advance. STEREO Reportez-vous coute en stro ci-dessus pour plus dinformations. A.L.C. Reportez-vous coute en stro ci-dessus pour plus dinformations. F.S.S.ADVANCE Produit un effet sonore surround trs riche au centre de la zone de convergence acoustique des enceintes avant droite et gauche. La position F.S.S.ADVANCE Enceinte Enceinte avant gauche avant droite 04 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 23 Fr
04 coute de votre systme Utilisation des modes Stream Direct Utilisez les modes Stream Direct pour reproduire une source de la manire la plus fidle possible. Toutes les fonctions de traitement de signal non ncessaires sont contournes. STANDARD ADV SURR TV CODE AUTO/
DIRECT STEREO/
A.L.C. DIMMER VOL LISTENING MODE BD MENU Pendant lcoute dune source, appuyez sur AUTO/DIRECT pour slectionner un mode Stream Direct. AUTO SURROUND Reportez-vous Lecture en mode Auto page 21. DIRECT Les sources sont entendues en fonction des rglags effectus en mode Dual mono.1 La source sonore est reproduite avec le nombre de voies que comporte le signal. PURE DIRECT Les sources PCM sont reproduites sans traitement numrique.2 Rglage des options audio De nombreux rglages audio supplmentaires peuvent tre effectus laide du menu AUDIO PARAMETER. Si elles ne sont pas marques comme telles, les options par dfaut sont indiques en gras. Important Notez que si un rglage napparat pas dans le menu AUDIO PARAMETER, cest quil nest pas disponible du fait de la source, des paramtres et de ltat actuel du systme. SYSTEM SYSTEM INPUT SOURCE INPUT HDMI1 HDMI2 TV CONTROL ENTER OPTICAL COAXIAL INPUT CH 1 Appuyez sur tlcommande, puis appuyez sur la touche AUDIO PARAMETER. de la 2 Utilisez pour choisir le rglage dfinir. Selon ltat ou le mode du systme, il se peut que certaines options ne soient pas disponibles. Consultez le tableau suivant pour en savoir plus ce sujet. 3 Utilisez les touches pour configurer selon les besoins. Consultez le tableau ci-dessous pour connatre les options disponibles pour chaque rglage. 4 Appuyez sur RETURN pour valider la slection et quitter le menu. Rglage S.DELAY
(Sound Delay) Sa fonction Certains moniteurs peuvent prsenter un lger dcalage lors de la retransmission vido, ce qui fait que la bande sonore est lgrement dsynchronise par rapport limage. Cette fonction permet dajouter un lger retard afin de resynchroniser le son et limage. Option(s) 0.0 9.0 (images) 1 seconde = 30 images
(NTSC) Rglage par dfaut :
0.0 Remarque 1 En mode DIRECT, les fonctions Sound Delay, Auto Delay, LFE Attenuate et Center Image sont disponibles. 2 Dans certains cas, vous entendrez un bruit bref avant la lecture de sources autres que PCM. Veuillez slectionner AUTO SURROUND ou DIRECT si ce bruit vous pose un problme. 24 Fr
coute de votre systme Rglage MIDNIGHT LOUDNESS S.RTV
(Sound Retriever) DUAL MONOa Sa fonction Permet de profiter dun vritable effet surround faible volume pour les films. Permet dobtenir un bon rendu des graves et des aigus lors de lcoute de sources musicales faible volume. Lorsque des donnes audio sont supprimes pendant le processus de compression WMA/MP3, la qualit du son est souvent affecte par une image sonore ingale. La fonction Sound Retriever a recours une nouvelle technologie DSP pour restaurer un son de qualit CD vers des sources audio compresses 2 canaux en rtablissant la pression sonore et en lissant les artfacts dentels restants aprs la compression. Ce rglage spcifie la faon dont les pistes Dolby Digital codes en mode Dual mono doivent tre lues. DRC
(Contrle de plage dynamique) Permet de rgler le niveau de la plage dynamique des bandes son optimises pour Dolby Digital, DTS, Dolby Digital Plus et Dolby TrueHD (cette fonction peut tre utile pour lcoute dun son surround faible volume). LFE ATT
(LFE Attenuate) Certaines sources audio Dolby Digital et DTS intgrent des graves ultra-bas. Rglez lattnuateur LFE de la manire requise pour empcher les graves ultra-bas de dformer le son au niveau des enceintes. Lattnuateur LFE napplique pas de limitation lorsquil est rgl sur 0 dB, la valeur recommande. Lorsquil est rgl sur 10 dB, lattnuateur LFE applique une limitation quivalente cette valeur. Lors dun rglage sur OFF, aucun son nest mis au niveau du canal LFE. Option(s) M/L OFF MIDNIGHT LOUDNESS OFF ON CH1 Seul le canal 1 est audible CH2 Seul le canal 2 est audible CH1 CH2 Les deux canaux sont audibles par les enceintes avant AUTOb MAX MID OFF LFEATT 0 (0 dB) LFEATT 10 (10 dB)/
LFEATT ** (OFF) 04 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 25 Fr
04 coute de votre systme Rglage HDMI
(HDMI Audio) A.DLY
(Auto Delay) C.WIDTHd
(Center Width) DIMEN.d
(Dimension) PNRM.d
(Panorama) C.IMGe
(Image centrale) Sa fonction Permet de spcifier le cheminement du signal audio HDMI : sortie de ce systme (amp) ou via un tlviseur ou un tlviseur cran plat. Lorsque THRU est slectionn, aucun son nest mis par ce systme. Cette fonction corrige automatiquement le retard entre le son et limage entre les composants raccords avec un cble HDMI. Le dlai dattente audio est paramtr en fonction de ltat oprationnel de lcran raccord avec un cble HDMI. Le dlai dattente vido est ajust automatiquement selon le dlai dattente audio.c Etire le canal central entre les enceintes avant droite et gauche ; le son mis semble alors tre plus large
(rglages plus hauts) ou, au contraire, plus troit
(rglages plus bas). Pour ajuster la profondeur de la balance des sons dambiance entre lavant et larrire, rendant les sons plus distants (rglages ngatifs) ou plus proches
(rglages positifs). Pour tendre limage stro avant, de manire inclure les haut-parleurs dambiance et obtenir un effet enveloppant. Ajustez limage centrale afin de crer un effet stro plus large avec les voix. Ajustez leffet de 0 (tous les canaux centraux envoys vers les enceintes avant droite et gauche) 10 (canaux centraux envoys vers lenceinte centrale uniquement). Option(s) AMP THRU OFF ON 0 7 Rglage par dfaut : 3 3 +3 Rglage par dfaut : 0 OFF ON 0 10 Rglage par dfaut : 3
(NEO:6 MUSIC), 10 (NEO:6 CINEMA) a. Ce rglage fonctionne uniquement pour des bandes son Dolby Digital et DTS codes en mode Dual mono. b. Le rglage initial AUTO est disponible uniquement pour les signaux Dolby TrueHD. Slectionnez MAX ou MID pour les signaux autres que Dolby TrueHD. c. Cette fonction est disponible uniquement lorsque lcran connect prend en charge la capacit de synchronisation audio/vido automatique (lip-sync) pour HDMI. Si le dlai dattente paramtr automatiquement ne vous convient pas, rglez A.DLY sur OFF et ajustez le dlai dattente manuellement. Pour plus de dtails sur la fonction de synchronisation labiale de votre cran, contactez directement votre fabricant. d. Disponible uniquement avec les sources 2 canaux en mode DOLBY PLII MUSIC. e. Uniquement lcoute de sources 2 canaux en mode NEO:6 CINEMA et NEO:6 MUSIC. 26 Fr
Commande des autres fonctions du systme Chapitre 5 Commande des autres fonctions du systme ou Prparation de la tlcommande pour grer dautres composants La plupart des composants peuvent tre attribus lune des touches INPUT SELECT en utilisant le code de prrglage du fabricant du composant, stock dans la tlcommande. Cependant, sachez quil existe des cas o seulement certaines fonctions peuvent tre contrles aprs affectation du code de prrglage adquat; faute de quoi les codes pour fabricant se trouvant dans la tlcommande ne fonctionneront pas pour le modle que vous utilisez. Remarque Pour annuler ou abandonner une des dmarches, maintenez la touche enfonce. Tout en appuyant sur la touche 1 maintenez la touche 1 enfonce pendant trois secondes.
, 2 Appuyez sur la touche
. 3 Utilisez les touches numriques pour saisir le code de prrglage. Vous trouverez les codes de prrglage page 31. Si vous avez saisi le code correct, le composant raccord se met sous ou hors tension. La mise sous ou hors tension na lieu que si le composant peut tre directement allum par la tlcommande. 4 Rptez les tapes 2 et 3 pour un code de prrglage diffrent. 5 Quand vous avez termin, appuyez sur
. Au bout dune minute dinactivit, la tlcommande quitte automatiquement lopration. Slection des codes de prrglage pour tlviseurs Slection des codes de prrglage pour autres composants SYSTEM SYSTEM INPUT SOURCE SYSTEM SYSTEM INPUT SOURCE INPUT HDMI1 HDMI2 TV CONTROL OPTICAL COAXIAL INPUT CH STANDARD ADV SURR TV CODE AUTO/
STEREO/
VOL INPUT HDMI1 HDMI2 TV CONTROL DISPLAY CH CH OPTICAL COAXIAL INPUT CH ENTER ANT MUTE DISPLAY CH CH ENTER 05 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 27 Fr
05 Commande des autres fonctions du systme Tout en appuyant sur la touche 1 maintenez la touche 1 enfonce pendant trois secondes.
, 2 Appuyez sur la touche INPUT SELECT pour slectionner le composant contrler. 3 Utilisez les touches numriques pour saisir le code de prrglage. Vous trouverez les codes de prrglage page 31. Si vous avez saisi le code correct, le composant raccord se met sous ou hors tension. La mise sous ou hors tension na lieu que si le composant peut tre directement allum par la tlcommande. 4 Rptez les tapes 2 et 3 pour essayer un autre code ou saisir un code pour un autre composant contrler. 5 Quand vous avez termin, appuyez sur
. Suppression de tous les rglages de la tlcommande Vous pouvez effacer tous les prrglages et rtablir les paramtres dfinis en usine. Tout en appuyant sur la touche maintenez la touche 0 enfonce pendant trois secondes.
, Code de prrglage Codes de prrglages par dfaut Touche INPUT SELECT HDMI1 HDMI2 OPTICAL COAXIAL 2 1 2 7 (Lecteur BD) 2 1 2 2 (Lecteur DVD) 2 1 2 1 (DVR) 1 1 2 0 (Magntoscope) 0 1 2 0 Commandes pour tlviseurs Cette tlcommande peut grer un tlviseur aprs avoir saisi son code correct (Reportez-vous Slection des codes de prrglage pour tlviseurs page 27). Pour utiliser un tlviseur, appuyez sur la touche INPUT SELECT, correspondand lentre laquelle le tlviseur est raccord. Les touches TV CONTROL de la tlcommande sont destines grer le tlviseur, attribu la touche
. Touche(s) TV CONTROL a Allume ou teint le DTV. Fonction Pour mettre le tlviseur ou la tlvision par cble sous tension ou en mode Veille. Commute lentre tlviseur. (Pas possible avec tous les modles.) Slectionne les chanes. Ajuste le volume du tlviseur. Composants DTV Tlviseur cbl/Tlviseur Satellite/Tlviseur Tlviseur Tlviseur cbl/Tlviseur Satellite/Tlviseur/DTV Tlviseur cbl/Tlviseur Satellite/Tlviseur/DTV Appuyez pour mettre le composant attribu la touche TV en service ou hors service. Tlviseur cbl/Tlviseur Satellite/Tlviseur/DTV TV CONTROL INPUTa TV CONTROL CH +/a TV CONTROL VOL +/a
SOURCE 28 Fr
Commande des autres fonctions du systme Touche(s) ANT Fonction Permet darrter lenregistrement. Permet de slectionner les antennes VHF/UHF ou le tlviseur cbl. Active ou dsactive TEXT ON/OFF pour les tlviseurs. Tlviseur Composants Tlviseur cbl/Tlviseur TOP MENU HOME MENU Utilisez comme touche GUIDE pour la navigation. Tlviseur cbl/Tlviseur Satellite/Tlviseur/DTV Permet de slectionner le sous-titrage cod avec la DTV. DTV Pour slectionner un chane de tlvision particulire. Tlviseur cbl/Tlviseur RETURN Touches numriques Touche +10 ENTER MENU Pour ajouter des dcimales lors de la slection dune chane de tlvision. Utilisez pour saisir une chane. Pour afficher le menu du DTV. Pour slectionner lcran de menu.
ENTER CH +/
Pour slectionner ou ajuster et naviguer parmi les lments de lcran de menu. Slectionne les chanes. Satellite/Tlviseur/DTV DTV Tlviseur cbl/Tlviseur Satellite/Tlviseur/DTV DTV Tlviseur cbl/Tlviseur Satellite/Tlviseur Tlviseur cbl/Tlviseur Satellite/Tlviseur/DTV Tlviseur cbl/Tlviseur Satellite/Tlviseur/DTV a.Si une entre pour un composant autre quun tlviseur est slectionne, le tlviseur attribu pas tre gr. ne peut Commandes pour autres composants Cette tlcommande peut grer un tlviseur aprs avoir saisi son code correct (Reportez-vous Slection des codes de prrglage pour autres composants page 27). Pour grer un autre composant, appuyez sur la touche INPUT SELECT correspondant au composant pour lequel un code de prrglage a t saisi. Touche(s)
SOURCE Appuyez sur cette touche pour allumer le composant ou le Fonction
mettre en veille. Appuyez pour revenir au dbut de la plage en cours. Des pressions rptes font sauter au dbut des plages prcdentes. Appuyez pour avancer au dbut de la plage suivante. Des pressions rptes font sauter au dbut des plages suivantes. Composants Lecteur BD/DVD, DVR, Magntoscope Lecteur BD/DVD, DVR, Magntoscope Lecteur BD/DVD, DVR, Magntoscope 05 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 29 Fr
05 Commande des autres fonctions du systme Touche(s)
Touches numriques Fonction Pour faire une pause pendant la lecture ou lenregistrement. Pour lancer la lecture. Tenez cette touche enfonce pour une lecture rapide. Tenez cette touche enfonce pour une lecture arrire rapide. Arrte la lecture (sur certains modles, la pression de cette touche lorsque le disque est dj arrt entrane louverture du plateau). Pour accder directement aux plages dune source de programme. utiliser pour saisir un numro de titre, de chapitre ou de plage. ENTER Touche +10 Pour slectionner des plages dont le numro est suprieur 10. (Par ex. appuyez sur +10 puis sur 3 pour slectionner la plage 13.) utiliser comme touche de validation ENTER. Affiche lcran DISC NAVI des enregistreurs DVR. Appuyez pour afficher les informations. DISPLAY TOP MENU Affiche le menu top dun lecteur BD/DVD. MENU Affiche les menus du lecteur BD/DVD ou de lenregistreur DVR que vous utilisez actuellement. Pour naviguer sur le menu/les options. Composants Lecteur BD/DVD, DVR, Magntoscope Lecteur BD/DVD, DVR, Magntoscope Lecteur BD/DVD, DVR, Magntoscope Lecteur BD/DVD, DVR, Magntoscope Lecteur BD/DVD, DVR, Magntoscope Magntoscope Lecteur BD/DVD, DVR Lecteur BD/DVD, DVR Lecteur BD/DVD DVR Lecteur BD/DVD, DVR Lecteur BD/DVD, DVR Lecteur BD/DVD, DVR Lecteur BD/DVD, DVR Affiche lcran HOME MENU. Lecteur BD/DVD, DVR Slectionne les chanes. Pour passer aux commandes du disque dur, lors de lutilisation dun graveur de HDD/DVD. Pour passer aux commandes DVD, lors de lutilisation dun graveur de HDD/DVD. Pour passer aux commandes du magntoscope, lors de lutilisation dun graveur de HDD/DVD. DVR, Magntoscope HDD/DVD/Magntoscope HDD/DVD/Magntoscope HDD/DVD/Magntoscope
, ENTER &
RETURN HOME MENU CH +/
HDD
(SHIFT + 1) DVD
(SHIFT + 2) VCR
(SHIFT + 3) 30 Fr
Commande des autres fonctions du systme Liste des codes de prrglage Vous ne devriez rencontrer aucun problme pour grer un composant si le fabricant apparat dans la liste. Il se peut toutefois que certains codes de fabricant, figurant sur la liste, ne fonctionnent pas pour le modle que vous utilisez. Il est galement possible que seules certaines fonctions puissent tre gres, mme aprs lattribution du code de prrglage appropri. Lecteur BD/
DVD/DVR Fabricant Code Accurian 2092 Advent 2072 Aiwa 2012 Akai 2066 Alco 2070 Allegro 2087 Amphion MediaWorks AMW 2037 Apex 2002, 2018, 2079, 2037 2080 Apple 2058 Arrgo 2088 Aspire 2073 Astar 2052 Audiovox 2070 Axion 2040 Bang & Olufsen 2081 Blaupunkt 2080 Blue Parade 2078 Boston 2059 Broksonic 2066 California Audio Labs 2068 2065 CambridgeSoundWorks CineVision 2087 Coby 2029 Curtis Mathes 2089 CyberHome 2000, 2088 Cytron 2039 Daewoo 2021, 2087 Denon 2026, 2068 Desay 2055 DiamondVision 2042 Disney 2022 Durabrand 2090 Emerson 2067, 2082, 2091 Enterprise 2082 ESA 2053, 2091 Fisher 2083 Funai 2091 GE 2016, 2077, 2080 GFM 2043 Go Video 2087 Gradiente 2068 Greenhill 2080 Haier 2094 Harman/Kardon 2030, 2084 Hitachi 2011 Hiteker 2079 iLive 2062 Ilo 2038 Initial 2038, 2080 Insignia 2036, 2064, 2091 Integra 2078 iSymphony 2060 JBL 2084 JVC 2013 Kawasaki 2070 Kenwood 2028, 2068 KLH 2070, 2080 Koss 2024, 2069, 2075 Landel 2093 Lasonic 2085 Lenoxx 2074, 2090 LG 2019, 2051, 2061, 2082, Liquid Video 2075 Liteon 2025, 2092 Magnavox 2067, 2076, 2087 2091 Memorex 2066 Microsoft 2077 Mintek 2038, 2080, 2086 Mitsubishi 2020 Nesa 2080 Next Base 2093 Nexxtech 2056 Onkyo 2076 Oppo 2041, 2057 Oritron 2069, 2075 Panasonic 2005, 2007, 2017, 2032, 2033, 2050, 2068, 2076 Philips 2045, 2076 Pioneer 2014, 2034, 2078, 2120, 2121, 2122, 2125, 2126, 2127 Proceed 2079 Proscan 2077 Qwestar 2069 RCA 2008, 2016, 2070, 2077, 2078, 2080 Regent 2074 Rio 2087 Rowa 2071 Samsung 2009, 2011, 2015, 2031, 2044, 2068 Sansui 2066 Sanyo 2066, 2083 Sharp 2035 Sherwood 2063 Shinsonic 2086 Sonic Blue 2087 Sony 2003, 2004, 2010, 2012, 2027, 2046, 2047, 2048 Sungale 2054 Superscan 2067 Sylvania 2023, 2067, 2091 Symphonic 2023 Teac 2070 Technics 2068 Theta Digital 2078 Toshiba 2001, 2006, 2049, 2066, 2076 Trutech 2000 Urban Concepts 2076 US Logic 2086 Venturer 2070 Xbox 2077 Yamaha 2005, 2068 Zenith 2019, 2076, 2082, 2087 Tlviseur Fabricant Code Admiral 0001, 0014 Adventura 0012 Aiwa 0002 Akai 0002, 0100 Albatron 0097 Alleron 0009 America Action 0104 Amtron 0008 Anam 0104 Anam National 0003, 0008 AOC 0004, 0005, 0006, 0100 Apex 0021, 0102, 0106 Audiovox 0008, 0104 Aventura 0103 Axion 0094 Bang & Olufsen 0111 Belcor 0004 Bell & Howell 0001 Benq 0064 Bradford 0008, 0104 Brillian 0109 Brockwood 0004 Broksonic 0104 Candle 0004, 0006, 0012, 0100 Carnivale 0100 Carver 0101 CCE 0110 Celebrity 0002 Celera 0106 Changhong 0106 Citizen 0004, 0006, 0008, 0100 Clarion 0104 Coby 0056 Colortyme 0004, 0006 Concerto 0004, 0006 Contec 0104 Contec/Cony 0007, 0008 Craig 0008, 0104 Crosley 0081, 0101 Crown 0008, 0104 CTX 0063 Curtis Mathes 0000, 0004, 0006, 0014, 0100, 0101 CXC 0008, 0104 Cytron 0093 Daewoo 0004, 0005, 0006, 0023 Daytron 0004, 0006 Dell 0073 DiamondVision 0096 Dimensia 0000 Disney 0046 Dumont 0004, 0011, 0099 Durabrand 0041, 0103, 0104 Dwin 0014 Electroband 0002 Electrograph 0107 Electrohome 0002, 0003, 0004, 0006 05 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 31 Fr
05 Commande des autres fonctions du systme Element 0082 Emerson 0004, 0006, 0007, 0008, 0009, 0023, 0103, 0104 Emprex 0092 Envision 0004, 0006, 0100 Epson 0061 ESA 0103 Fujitsu 0009 Funai 0008, 0009, 0103, 0104 Futuretech 0008, 0104 Gateway 0067, 0107, 0108 GE 0000, 0003, 0004, 0006, 0010, 0016, 0039 GFM 0080, 0084 Gibralter 0004, 0011, 0099, 0100 Goldstar 0004, 0005, 0006, 0007, 0100 Gradiente 0066 Grunpy 0008, 0009, 0104 Haier 0112 Hallmark 0004, 0006 Harman/Kardon 0101 Harvard 0008, 0104 Havermy 0014 Hewlett Packard 0053 Hisense 0069 Hitachi 0004, 0006, 0007 Hyundai 0098 Ilo 0089, 0091 IMA 0008 Infinity 0101 InFocus 0074 Initial 0091 Insignia 0085, 0086 Inteq 0099 Janeil 0012 JBL 0101 JC Penney 0000, 0004, 0005, 0006, 0010 JCB 0002 Jensen 0004, 0006 JVC 0007, 0010, 0044 Kawasho 0002, 0004, 0006 KEC 0104 Kenwood 0004, 0006, 0100 KLH 0106 Kloss Novabeam 0008, 0012 KTV 0008, 0100, 0104, 0110 LG 0005, 0052, 0078, 0097 Logik 0001 Luxman 0004, 0006 LXI 0000, 0006, 0101, 0102 Magnavox 0004, 0006, 0019, 0020, 0037, 0042, 0100, 0101 Majestic 0001 Marantz 0004, 0006, 0062, 0100, 0101 Matsushita 0105 Maxent 0087, 0107 Megapower 0097 Megatron 0006 Memorex 0001, 0005, 0006, 0041 MGA 0004, 0005, 0006, 0100 Midland 0010, 0011, 0099 Mintek 0091 Mitsubishi 0004, 0005, 0006, 0014, 0045 Monivision 0097 Montgomery Ward 0001 Motorola 0003, 0014 MTC 0004, 0005, 0006, 0100 Multitech 0008, 0104, 0110 NAD 0006, 0102 NEC 0003, 0004, 0005, 0006, 0100 Net-TV 0107 Nikko 0006, 0100 Norcent 0060 Olevia 0048, 0054, 0059 Onwa 0008, 0104 Oppo 0095 Optimus 0105 Optoma 0075 Optonica 0014 Orion 0025 Panasonic 0003, 0010, 0017, 0027, 0105, 0121 Penney 0100, 0102 Philco 0003, 0004, 0005, 0006, 0007, 0100, 0101 Philips 0003, 0004, 0007, 0019, 0020, 0101 Philips Magnavox 0019 Pilot 0004, 0100 Pioneer 0004, 0006, 0120 Polaroid 0057, 0106 Portland 0004, 0005, 0006 Prima 0065 Princeton 0097 Prism 0010 Proscan 0000 Proton 0004, 0006, 0007 Protron 0055 Proview 0068 Pulsar 0004, 0011, 0099 Quasar 0003, 0010, 0105 Radio Shack 0100, 0104 Radio Shack/Realistic 0000, 0004, 0006, 0007, 0008 RCA 0000, 0003, 0004, 0005, 0006, 0013, 0024, 0035 Realistic 0100, 0104 Runco 0011, 0099, 0100 Sampo 0004, 0006, 0100, 0107 Samsung 0004, 0005, 0006, 0007, 0022, 0032, 0076, 0077, 0083, 0100, 0110 Sansui 0025 Sanyo 0004, 0050 Sceptre 0072 Scotch 0006 Scott 0004, 0006, 0007, 0008, 0009, 0090, 0104 Sears 0000, 0004, 0006, 0009, 0101, 0102, 0103 Sharp 0004, 0006, 0007, 0014, 0033 Sheng Chia 0014 Shogun 0004 Signature 0001 Sony 0002, 0018, 0029, 0030, 0031, 0034 Soundesign 0004, 0006, 0008, 0009, 0104 Squareview 0103 SSS 0004, 0008, 0104 Starlite 0008, 0104 Superscan 0014 Supre-Macy 0012 Supreme 0002 SVA 0088 Sylvania 0004, 0006, 0049, 0079, 0080, 0100, 0101, 0103 Symphonic 0008, 0041, 0103, 0104 Syntax 0054 Syntax-Brillian 0054 Tandy 0014 Tatung 0003, 0108 Technics 0010, 0105 Techwood 0004, 0006, 0010 Teknika 0001, 0004, 0005, 0006, 0007, 0008, 0009, 0101, 0104 TMK 0004, 0006 TNCi 0099 Toshiba 0026, 0028, 0036, 0038, 0040, 0043, 0102 Vector Research 0100 Vidikron 101 Vidtech 0004, 0005, 0006 Viewsonic 0058, 0107 Viking 0012 Viore 0089 Vizio 0004, 0070, 0071, 0108 Wards 0000, 0001, 0004, 0005, 0006, 0009, 0100, 0101 Waycon 0102 Westinghouse 0047, 0051 White Westinghouse Yamaha 0004, 0005, 0006, 0023 0100 Zenith 0001, 0004, 0011, 0015, 0099 Magntoscope Fabricant Code ABS 1017 Adventura 1005 Aiwa 1005 Alienware 1017 American High 1004 Asha 1002 Audio Dynamics 1000 Audiovox 1003 Bang & Olufsen 1032 Beaumark 1002 Bell & Howell 1001 Calix 1003 Candle 1002, 1003 Canon 1004 Citizen 1002, 1003 Colortyme 1000 Craig 1002, 1003 Curtis Mathes 1000, 1002, 1004 Cybernex 1002 CyberPower 1017 Daewoo 1005 DBX 1000 Dell 1017 DIRECTV 1016, 1020, 1022, 1023, 1024, 1027, 1030, 1031 Dish Network 1029 Dishpro 1029 Durabrand 1018 Dynatech 1005 Echostar 1029 Electrohome 1003 Electrophonic 1003 Emerson 1003, 1004, 1005 32 Fr
Commande des autres fonctions du systme TMK 1002 Toshiba 1015, 1017, 1028 Totevision 1002, 1003 Touch 1017 UltimateTV 1031 Unitech 1002 Vector Research 1000 Video Concepts 1000 Videosonic 1002 Viewsonic 1017 Voodoo 1017 Wards 1002, 1003, 1004, 1005 XR-1000 1004, 1005 Yamaha 1000, 1001 Zenith 1013, 1018 ZT Group 1017 Expressvu 1029 Fisher 1001 Fuji 1004 Funai 1005 Garrard 1005 Gateway 1017 GE 1002, 1004 GOI 1029 Goldstar 1000, 1003 Gradiente 1005 Harley Davidson 1005 Harman/Kardon 1000 Headquarter 1001 Hewlett Packard 1017 HNS 1016 Howard Computers 1017 HP 1017 HTS 1029 Hughes Network Systems 1016, 1020, 1022, 1023, 1024 Humax 1016, 1020 Hush 1017 iBUYPOWER 1017 Instant Replay 1004 JC Penney 1000, 1001, 1002, 1003, 1004 JCL 1004 JVC 1000, 1001, 1020, 1029 Kenwood 1000, 1001 Kodak 1003, 1004 LG 1003 Linksys 1017 Lloyd's 1005 LXI 1003 Magnavox 1004, 1018 Magnin 1003 Marantz 1000, 1001, 1004 Marta 1003 Matsushita 1004 Media Center PC 1017 MEI 1004 Memorex 1001, 1002, 1003, 1004, 1005, 1018, 1019 MGN Technology 1002 Microsoft 1017 Mind 1017 Mitsubishi 1010 Motorola 1004 MTC 1002 Multitech 1002, 1005 NEC 1000, 1001 Nikko 1003 Niveus Media 1017 Noblex 1002 Northgate 1017 Olympus 1004 Optimus 1003 Orion 1014, 1019 Pioneer 1120 Panasonic 1004, 1008 Philco 1004 Philips 1004, 1011, 1016, 1020, 1022, 1023, 1024, 1025 Philips Magnavox 1011 Pilot 1003 Proscan 1030 Pulsar 1018 Quarter 1001 Quartz 1001 Quasar 1004 Radio Shack 1003 Radio Shack/Realistic 1001, 1002, 1003, 1004, 1005 Radix 1003 Randex 1003 RCA 1002, 1004, 1007, 1016, 1020, 1022, 1030, 1031 Realistic 1001, 1002, 1003, 1004, 1005 ReplayTV 1026 Ricavision 1017 Runco 1018 Samsung 1002, 1016, 1022, 1024 Sanky 1018 Sansui 1014, 1019 Sanyo 1001, 1002 Sears 1001, 1003, 1004 Sharp 1012 Shogun 1002 Singer 1004 Sonic Blue 1026 Sony 1006, 1009, 1017, 1021 Stack 1017 STS 1004 Sylvania 1004, 1005 Symphonic 1005 Systemax 1017 Tagar Systems 1017 Tandy 1001 Tashiko 1003 Teac 1005 Technics 1004 Teknika 1003, 1004, 1005 Tivo 1016, 1020, 1021, 1022, 1025 05 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 33 Fr
06 Informations complmentaires Chapitre 6 Informations complmentaires Guide de dpannage Les erreurs de commande sont souvent prises pour une anomalie et un dysfonctionnement. Si vous pensez que lappareil ne fonctionne pas convenablement, vrifiez les points suivants. Inspectez les autres composants et appareils lectriques utiliss car, quelquefois, le problme provient dun autre appareil. Si le problme ne peut pas tre rsolu grce la liste de contrle ci-
dessous, consultez le service aprs-vente Pioneer indpendant agr le plus proche pour effectuer la rparation. Si le systme ne fonctionne pas normalement en raison dinterfrences externes comme llectricit statique, dbranchez la fiche de la prise secteur, puis rebranchez-la pour restaurer les conditions de fonctionnement normales. Anomalie Impossible de mettre le systme sous tension. Le systme steint brusquement. Aucun son nest mis lorsquune fonction est slectionne. Aucune image nest mise lorsquune fonction est slectionne. Le son du caisson des basses est entrecoup. Correction Dbranchez la fiche dalimentation de la prise secteur, puis rebranchez-
la. Aprs environ une minute, pendant laquelle vous ne pourrez pas allumer lappareil, rallumez le systme. Si le message subsiste, appelez le service aprs-vente agr Pioneer. Vrifiez que le composant est correctement connect (reportez-vous Connexions page 12). Appuyez sur MUTE sur la telecommande pour desactiver la fonction darret du son. Vrifiez que le composant est correctement connect (reportez-vous Connexions page 12). Slectionnez le composant appropri (utilisez les touches INPUT SELECT ). Lentre vido slectionne sur le moniteur tl est incorrecte. Reportez-vous au mode demploi fourni avec votre tlviseur. Si un composant lectronique (tlphone portable, priphrique sans fil Bluetooth, LAN sans fil, micro-ondes, etc.) utilisantla mme frquence
(2,4 GHz) fonctionne proximit, changez son emplacement. La plage de haute frquence utilise par cet appareil pour la transmission des signaux prsente les mmes caractristiques de transmisson enligne directe, de rflexion, de rfraction, de diffraction et dinterfrence que les ondes lumineuses ordinaires. Par consquent, lefficacit de la transmission des signaux peut varier selon lemplacement, ce qui provoque des interruptions du son. Dans ce cas, essayez de modifier lemplacement ou les conditions de linstallation. Si la transmission des signaux laisse dsirer par suite dun cartement excessif entre lunit principale et le caisson de basses, rapprochez ce dernier de lunit principale. Si vous utilisez le systme dans une rgion soumise frquemment des interfrences statiques ou lectriques, essayez de changer lemplacement dinstallation du caisson de basses. 34 Fr
Informations complmentaires Anomalie Aucun son nest mis par le caisson de basses. Parasites la lecture dune platine-cassette. la lecture dun contenu avec le systme DTS, aucun son nest mis ou les sons prsentent de parasites. Lors dune recherche pendant la lecture, du bruit est mis par un lecteur de CD compatible avec le systme DTS. Impossible de faire fonctionner la tlcommande. Laffichage est noir ou teint. HDMI Symptme Pas dimage ou de son. Correction Il se peut que la source Dolby Digital ou DTS que vous coutez na pas de canal LFE. Rglez lattnuateur LFE ATT (LFE Attenuate) page 25 sur LFEATT 0 ou LFEATT 10. La qualit de la transmission peut varier en raison de la prsence dobstacles ou dobjets rflchissants sur le passage des signaux. Essayez de modifier la position ou lorientation du caisson de basses. Lunit principale et le caisson de basses de cet ensemble agissent comme une paire et ils sont conus pour sidentifier mutuellement. La transmission des signaux nest pas possible si une unit principale ou un caisson de basses dun autre ensemble est utilis. Il se peut que le caisson de basses nmette plus de sons la lecture dune musique dont la plage des graves profondes manque de continuit. Procdez au pairage de lunit principale et du caisson de basses
(reportez-vous page 8). loignez la platine-cassette de votre systme jusqu disparition des parasites. Rglez le niveau du volume numrique du lecteur fond, ou en position neutre. Assurez-vous que les rglages du lecteur sont corrects et/ou que la sortie du signal DTS est active. Reportez-vous au mode demploi fourni avec votre lecteur de DVD. Il ne sagit pas dun dysfontionnement, mais veillez baisser le volume pour viter que le son mis par les enceintes ne soit trop fort. Remplacez les piles (reportez-vous page 20). Utilisez moins de 7 m, et un angle de 30 du capteur de tlcommande (reportez-vous page 20). Retirez tous les obstacles ou utilisez-la depuis un autre endroit. vitez dexposer le capteur situ sur le panneau avant une lumire directe. Appuyez sur DIMMER de la tlcommande plusieurs reprises pour revenir aux paramtres par dfaut. Correction Si le problme persiste lorsque vous raccordez votre quipement HDMI directement votre moniteur, veuillez consulter le manuel du moniteur ou de lquipement ou contacter le fabricant pour obtenir de laide. 06 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 35 Fr
06 Informations complmentaires Symptme Absence dimage. Pas de son, ou interruption soudaine du son. Correction Il est possible que les paramtres de sortie du composant de source soient configurs de telle sorte que le format vido transmis soit impossible afficher. Modifiez les paramtres de sortie de la source, ou connectez le composant de source directement sur le tlviseur au moyen des prises vido composites ou composantes. Ce systme est compatible HDCP. Assurez-vous que les composants que vous raccordez sont galement compatibles HDCP. Si ce nest pas le cas, connectez directement le composant de source sur le tlviseur au moyen des prises vido composites ou composantes. Il est possible que le composant de source raccord ne fonctionne pas avec ce systme (mme sil est compatible HDCP). Dans ce cas, connectez directement le composant de source sur le tlviseur au moyen des prises vido composites ou composantes. Si le signal vido napparat pas sur votre tlviseur ou votre cran plat, essayez dajuster la rsolution, DeepColor ou dautres paramtres sur votre composant. Pour transmettre des signaux en DeepColor, utilisez un cble HDMI
(cble High Speed HDMITM) pour raccorder ce systme un composant ou un tlviseur, quip de la fonction DeepColor. Si vous avez tabli des connexions audio spares, vrifiez que vous avez affect la/les sortie(s) analogique/numrique lentre HDMI correspondante pour le composant. Vrifiez les paramtres de sortie audio du composant de source. Vrifiez que le rglage Audio Parameter est rgl sur HDMI AMP/THRU
(reportez-vous page 26). Si le composant est un appareil DVI, utilisez une connexion distincte pour laudio. Information importante relative la connexion HDMI Dans certains cas, il ne sera peut-tre pas possible dacheminer les signaux HDMI via ce systme (ceci dpend du composant HDMI que vous connectez - vrifiez les informations du fabricant propos de la compatibilit HDMI). Si vous ne recevez pas correctement les signaux HDMI (de votre composant) via ce systme, essayez la configuration suivante pour la connexion. Configuration1 Raccordez votre composant compatible HDMI directement lcran laide dun cble HDMI. Utilisez ensuite la connexion la plus pratique
(numrique, si possible) pour transmettre les signaux audio au systme. Reportez-vous au mode demploi pour des dtails sur les connexions audio. Rglez le volume de lcran au minimum lorsque vous utilisez cette configuration. Remarque 1 Si votre cran na quune seule borne HDMI, vous ne pouvez recevoir que les signaux vido HDMI du composant connect. En fonction du composant, la sortie audio peut tre limite au nombre de canaux disponibles sur lunit daffichage connecte (par ex. la sortie audio est limite 2 canaux pour un moniteur avec limitations audio stro). Si vous souhaitez changer de source dentre, vous devrez modifier les fonctions la fois sur le systme et sur lcran. Etant donn que le son de lcran est en sourdine lorsque la connexion HDMI est utilise, vous devez rgler le volume de lcran chaque fois que vous changez de source dentre. 36 Fr
Informations complmentaires Prcautions lemploi du caisson de basses sans fil Prcautions relatives la longueur donde Cet appareil est conu de manire viter que des oreilles indiscrtes dautres personnes ncoutent les signaux transmis; toutefois, des prcautions doivent tre prises pour empcher quautrui nintercepte et ncoute les signaux transmis. Etant donn que cet appareil effectue des transmissions par ondes radio,un individu pourrait dlibrment se servir dun rcepteur et tenter dintercepter ces transmissions. Par consquent, on vitera dutiliser cet appareil pour effectuer des transmissions importantes et caractre priv. Cet appareil utilise la bande de frquecne de 2,4 GHz. Cette bande est partage par divers autres quipements, dont les suivants. En particulier, les appareils dont lutilisateur na gure connaissance sont rassembls en 2 ci-
aprs. Exemples dappareil ordinaires utilisant la 1 bande de 2,4 GHz :
Tlphone sans fil Tlcopieur sans fil Four micro-ondes Routeur LAN sans fil Appareil audiovisuel sans fil (y compris caissons de basses sans fil de Pioneer) Consoles de jeu sans fil Dispositifs thrapeutiques micro-ondes Dispistifs technologie Bluetooth sans fil 2 Autres dispositifs utilisant la bande de 2,4 GHz :
Systme de prvention de vol ltalage Radio amateur sans fil Systmes de contrle de distribution en usines et entrepts Systmes didentification sans fil pour chemins defer et vhicules durgence Si un quipement de ce genre est uitilis en mme temps que ce systme denceintes, des interfrences peuvent se produire sur les signaux, provoquant des pertes de signal, des parasites ou des interruptions du son. Dans ce cas, le voyant de lunit principale sallume en rouge. Ceci provient dinterfrences sur les signaux et il ne sagit pas dun dysfonctionnement de lappareil. Pour amliorer la qualit de la rception, essayez ce qui suit :
Mettez hors tension lappareil mettant des ondes radio. Eloignez lappareil lorigine des interfrences. Nutilisez pas ce systme dans les endroits suivants, car des parasites ou une interruption de la transmission pourrait en rsulter :
Endroits dans lesquels sont utiliss dautres quipements fonctionnant sur la mme frquence de 2,4 GHz, tels quun appareil technologie Bluetooth sans fil ou un LAN sans fil, ou endroits dans lesquels un champ magntique, de llectricit statique ou des interfrences dondes radio dun autre appareil peuvent se produire
(selon le milieu, la transmission des ondes radio ne sera pas efficace). Eloignez la radio (des parasites peuvent en rsulter). Si des parasites apparaissent sur lcran du tlviseur, il se peut que cet appareil produise des effets nfastes sur lantenne du tlviseur, lappareil vido, le tuner BS ou le tuner CS. Eloignez cet appareil par rapport lantenne du dispositif affect. 06 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 37 Fr
06 Informations complmentaires Plage dutilisation Conu pour une utilisation lintrieur de maisons prives (lagencement ou les conditions de la pice peuvent rduire la distance de transmission des signaux). Dans les cas suivants, le son peut subir des pertes ou tre interrompu du fait dune mauvaise transmission des ondes radio. Si la transmission des signaux est bloque par un mur ou un plancher en bton arm ou en mtal. proximit de grands meubles mtalliques Dans une grande foule ou prs dimmeubles faisant obstacle. Endroits dans lesquels sont utiliss dautres quipements fonctionnant sur la mme frquence de 2,4 GHz, tels quun appareil technologie Bluetooth sans fil ou un LAN sans fil, ou endroits dans lesquels un champ magntique, de llectricit statique ou des interfrences dondes radio dun autre appareil peuvent se produire. Si vous habitez dans un ensemble rsidentiel (appartement, immeuble, etc.) dont votre voisin utilise un micro-ondes un endroit proche de cet appareil. Notez quun micro-ondes nexercera pas dinterfrence sur cet appareil sil nest pas en service. lemploi de plusieurs caissons de basses Pioneer dans le mme endroit. Rflexion des signaux Parmi les signaux parvenant au caisson de basses sans fil figurent ceux qui sont transmis en ligne droite depuis lunit principale (ondes directes) et ceux qui lui arrivent aprs avoir t rflchis par les parois, meubles et autres btiments (ondes rflchies). En consquence, les ondes rflchies par les obstacles et divers objets peuvent provoquer des variations de la qualit du signal et du son. Dans ces cas, essayez de modifier lgrement la position du caisson de basses sans fil. Il se peut aussi que les sons subissent des pertes ou des interruptions si les ondes sont bloques par une personne ou si quelquun sapproche de lappareil. Attention lexception des cas dfinis par la loi comme imposant une responsabilit lgale, Pioneer refuse toute responsabilit pour des torts ventuels, subis par le client ou une autre personne au cours de lutilisation de cet appareil. En vue dune utilisation sre Nutilisez pas cet appareil prs de dispositifs lectroniques faisant appel des ondes radio de haute prcision ou trs dlicates car ceux-ci pourraient fonctionner incorrectement. Exemples de dispositifs exigeant une attention particulire :
Prothse auditive, stimultateur cardiaque et autres dispositifs lectroniques mdicaux ou thrapeuthiques, dtecteurs dincendie/de fume, dispositifs de fermeture automatique de portes et autres dispositifs automatiques. Les patients utilisant un stimulateur cardiaque ou dautres dispositifs lectroniques mdicaux ou thrapeuthiques doivent consulter le fabricant ou un concessionnaire de leur appareil en ce qui concerne les effets potentiels des ondes radio manant de cet appareil. Nutilisez pas dans un avion, un hpital ou tout autre endroit dans lequel lemploi de dispositifs producteurs dondes radio est interdit car il pourrait affecter les quipements de communications de vol et/
ou des quipements mdicaux. Respectez toutes les prcautions et les directives manant des tablissements mdicaux. 38 Fr
Informations complmentaires Rinitialisation de lunit principale Cette procdure permet de restaurer les paramtres du systme aux valeurs dfinies en usine. Utilisez les commandes du panneau avant cet effet. 1 Mettez le systme sous tension. En maintenant enfonce la touche 2 STEREO/A.L.C. du panneaui avant, maintenez enfonce la touche HDMI1 de la tlcommande pendant 2 secondes environ. 3 Dbranchez le cordon dalimentation de la prise secteur. Le systme est ainsi rinitialis aux paramtres dfinis en usine. Caractristiques techniques Unit principale Section amplificateur Puissance nominale de sortie Avant. 50 W par canal (1 kHz, 6 , 10 %) Centre . 50 W (1 kHz, 6 , 10 %) Section Entre/Sortie Borne HDMI :
Entre . 19 broches x2 Sortie . 19 broches (5 V, 100 mA) Entre audio
. Coaxiale x1, Optique x1 (Numrique) Section Enceintes Enceintes avant Botier . type botier ferm
( blindage magntique) Systme . systme 1 voie de 7,7 cm Enceintes . type cne de 7,7 cm Impdance . 6 Gamme de frquences . 200 Hz 20 kHz Puissance dentre max. . 100 W Enceinte centrale Botier . type botier ferm
( blindage magntique) Systme. systme 1 voie de 7,7 cm Enceintes . type cne de 7,7 cm x2 Impdance . 12 Gamme de frquences . 200 Hz 20 kHz Puissance dentre max. 100 W Divers Alimentation . CA 120 V, 60 Hz Consommation . 40 W En veille . 1 W Dimensions
. 900 mm (L) x 108 mm (H) x 95 mm (P) Poids (sans emballage) . 2,9 kg Accessoires Tlcommande . 1 Piles (taille AAA, IEC R03) . 2 Adaptateur secteur. 1 Cordons dalimentation . 2 Appliques (pour unit principale) . 2 Gabarit pour montage sur paroi . 1 Coussinets antidrapants
(pour caisson de basses) . 4 Mode demploi (ce document) Caisson de basses sans fil Section amplificateur Puissance nominale de sortie Caisson de graves
. 100 W (100 Hz, 4 , 10 %) Section Enceintes Botier . type bass-reflex Systme . systme 1 voie de 16 cm Haut-parleurs . type cne de 16 cm x1 Impdance . 4 Gamme de frquences . 40 Hz 1 000 Hz Puissance dentre max. 100 W Divers Alimentation . CA 120 V, 60 Hz Consommation . 45 W En veille . 1 W Dimensions
. 411 mm (L) x 181 mm (H) x 215 mm (P) Poids (sans emballage) . 4,4 kg 06 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 39 Fr
06 Informations complmentaires Remarque Spcifications et prsentation sous rserve de modification sans pravis suite des amliorations. Nettoyage de lappareil Utilisez un chiffon polir ou un chiffon sec pour enlever la poussire et la salet. Si la surface de lappareil est trs sale, essuyez-la avec un tissu doux pralablement imprgn dune solution de nettoyage neutre (dilue cinq six fois) et bien essor, puis essuyez de nouveau lappareil avec un chiffon sec. Nutilisez pas de cire ni de dtergent pour le mobilier. Nutilisez jamais de diluant, benzine, insecticides ou autres produits chimiques sur ou proximit de lappareil, car ils risquent de corroder la surface. Publication de Pioneer Corporation. 2009 Pioneer Corporation. Tous droits de reproduction et de traduction rservs. 40 Fr
Informations complmentaires 06 E n g l i s h F r a n a i s D e u t s c h I t a l i a n o E s p a o l N e d e r l a n d s P y c c 41 Fr
PIONEER ELECTRONICS (USA) INC. PIONEER ELECTRONICS OF CANADA, INC. WARRANTY VALID ONLY IN COUNTRY OF PRODUCT PURCHASE LIMITED WARRANTY WARRANTY Pioneer Electronics (USA) Inc. (PUSA), and Pioneer Electronics Of Canada, Inc. (POC), warrant that products distributed by PUSA in the U.S.A., and by POC in Canada that fail to function properly under normal use due to a manufacturing defect when installed and operated according to the owners manual enclosed with the unit will be repaired or replaced with a unit of comparable value, at the option of PUSA or POC, without charge to you for parts or actual repair work. Parts supplied under this warranty may be new or rebuilt at the option of PUSA or POC. THIS LIMITED WARRANTY APPLIES TO THE ORIGINAL OR ANY SUBSEQUENT OWNER OF THIS PIONEER PRODUCT DURING THE WARRANTY PERIOD PROVIDED THE PRODUCT WAS PURCHASED FROM AN AUTHORIZED PIONEER DISTRIBUTOR/DEALER IN THE U.S.A. OR CANADA. YOU WILL BE REQUIRED TO PROVIDE A SALES RECEIPT OR OTHER VALID PROOF OF PURCHASE SHOWING THE DATE OF ORIGINAL PURCHASE OR, IF RENTED, YOUR RENTAL CONTRACT SHOWING THE PLACE AND DATE OF FIRST RENTAL. IN THE EVENT SERVICE IS REQUIRED, THE PRODUCT MUST BE DELIVERED WITHIN THE WARRANTY PERIOD, TRANSPORTATION PREPAID, ONLY FROM WITHIN THE COUNTRY OF PURCHASE AS EXPLAINED IN THIS DOCUMENT. YOU WILL BE RESPONSIBLE FOR REMOVAL AND INSTALLATION OF THE PRODUCT. PUSA OR POC, AS APPROPRIATE, WILL PAY TO RETURN THE REPAIRED OR REPLACEMENT PRODUCT TO YOU WITHIN THE COUNTRY OF PURCHASE. Parts Labor PRODUCT WARRANTY PERIOD 1 Year 1 Year Home Audio and Video ......................................................................................................................................................... 90 Days 90 Days Microphones, Headphones, Phono Cartridges and Styluses ................................................................................................ Shorter limited warranty periods apply to some models. Please refer to the limited warranty document enclosed with the product for a definitive statement of the warranty period. The warranty period for retail customers who rent the product commences upon the date product is first put into use (a) during the rental period or (b) retail sale, whichever occurs first. WHAT IS NOT COVERED IF THIS PRODUCT WAS PURCHASED FROM AN UNAUTHORIZED DISTRIBUTOR, THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND THIS PRODUCT IS SOLD STRICTLY AS IS AND WITH ALL FAULTS". PIONEER SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL AND/OR INCIDENTAL DAMAGES. PIONEER DOES NOT WARRANT ANY PRODUCT LISTED ABOVE WHEN IT IS USED IN A TRADE OR BUSINESS OR IN ANY INDUSTRIAL OR COMMERCIAL APPLICATION. THIS WARRANTY DOES NOT APPLY IF THE PRODUCT HAS BEEN SUBJECTED TO POWER IN EXCESS OF ITS PUBLISHED POWER RATING. THIS WARRANTY DOES NOT COVER TELEVISION OR DISPLAY SCREENS DAMAGED BY STATIC, NON-MOVING, IMAGES APPLIED FOR LENGTHY PERIODS (BURN-IN). THIS WARRANTY DOES NOT COVER THE CABINET OR ANY APPEARANCE ITEM, USER ATTACHED ANTENNA, ANY DAMAGE TO RECORDS OR RECORDING TAPES OR DISCS, ANY DAMAGE TO THE PRODUCT RESULTING FROM ALTERATIONS, MODIFICATIONS NOT AUTHORIZED IN WRITING BY PIONEER, ACCIDENT, MISUSE OR ABUSE, DAMAGE DUE TO LIGHTNING OR TO POWER SURGES, SUBSEQUENT DAMAGE FROM LEAKING, DAMAGE FROM INOPERATIVE BATTERIES, OR THE USE OF BATTERIES NOT CONFORMING TO THOSE SPECIFIED IN THE OWNERS MANUAL. THIS WARRANTY DOES NOT COVER THE COST OF PARTS OR LABOR WHICH WOULD BE OTHERWISE PROVIDED WITHOUT CHARGE UNDER THIS WARRANTY OBTAINED FROM ANY SOURCE OTHER THAN A PIONEER AUTHORIZED SERVICE COMPANY OR OTHER DESIGNATED LOCATION. THIS WARRANTY DOES NOT COVER DEFECTS OR DAMAGE CAUSED BY THE USE OF UNAUTHORIZED PARTS OR LABOR OR FROM IMPROPER MAINTENANCE. ALTERED, DEFACED, OR REMOVED SERIAL NUMBERS VOID THIS ENTIRE WARRANTY NO OTHER WARRANTIES IN THE U.S.A. - PIONEER LIMITS ITS OBLIGATIONS UNDER ANY IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, TO A PERIOD NOT TO EXCEED THE WARRANTY PERIOD. NO WARRANTIES SHALL APPLY AFTER THE WARRANTY PERIOD. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND SOME STATES DO NOT ALLOW THE EXCLUSIONS OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE. IN CANADA - EXCEPT AS EXPRESSLY PROVIDED HEREIN, THERE ARE NO REPRESENTATIONS, WARRANTIES, OBLIGATIONS OR CONDITIONS, IMPLIED, STATUTORY OR OTHERWISE, APPLICABLE TO THIS PRODUCT. TO OBTAIN SERVICE PUSA and POC have appointed a number of Authorized Service Companies throughout the U.S.A. and Canada should your product require service. To receive warranty service you need to present your sales receipt or, if rented, your rental contract showing place and date of original owners transaction. If shipping the unit you will need to package it carefully and send it, transportation prepaid by a traceable, insured method, to an Authorized Service Company. Package the product using adequate padding material to prevent damage in transit. The original container is ideal for this purpose. Include your name, address and telephone number where you can be reached during business hours. On all complaints and concerns in the U.S.A. call Customer Support at 1-800-421-1404, or, in Canada, call Customer Satisfaction at 1-877-283-5901. IN THE U.S.A. For hook-up and operation of your unit or to locate an Authorized Service Company, please call or write:
PIONEER ELECTRONICS SERVICE, INC. LONG BEACH, CALIFORNIA 90801 P.O. BOX 1760 1-800-421-1404 http://www.pioneerelectronics.com IN CANADA For additional information on this warranty, please call or write:
CUSTOMER SATISFACTION GROUP PIONEER ELECTRONICS OF CANADA, INC. 300 ALLSTATE PARKWAY MARKHAM, ON L3R 0P2
(905) 479-4411 1-877-283-5901 http://www.pioneerelectronics.ca DISPUTE RESOLUTION IN THE U.S.A. - Following our response to any initial request to Customer Support, should a dispute arise between you and Pioneer, Pioneer makes available its Complaint Resolution Program to resolve the dispute. The Complaint Resolution Program is available to you without charge. You are required to use the Complaint Resolution Program before you exercise any rights under, or seek any remedies, created by Title I of the Magnuson-Moss Warranty-Federal Trade Commission Improvement Act, 15 U.S.C. 2301 et seq. To use the Complaint Resolution Program call 1-800-421-1404 and explain to the customer service representative the problem you are experiencing, steps you have taken to have the product repaired during the warranty period and the name of the authorized Distributor/Dealer from whom the Pioneer product was purchased. After the complaint has been explained to the representative, a resolution number will be issued. Within 40 days of receiving your complaint, Pioneer will investigate the dispute and will either:
(1) respond to your complaint in writing informing you what action Pioneer will take, and in what time period, to resolve the dispute; or (2) respond to your complaint in writing informing you why it will not take any action. IN CANADA - Call the Customer Satisfaction Manager at (905) 946-7446 to discuss your complaint and to obtain a prompt resolution. RECORD THE PLACE AND DATE OF PURCHASE FOR FUTURE REFERENCE Model No. ____________________________________________ Serial No. _________________________________________ Purchase Date _______________________ Purchased From _______________________________________________________________________________________________________________________________ KEEP THIS INFORMATION AND YOUR SALES RECEIPT IN A SAFE PLACE
PIONEER ELECTRONICS (USA) INC. PIONEER ELECTRONIQUES DU CANADA, INC. GARANTIE VALIDE SEULEMENT DANS LE PAYS OU LE PRODUIT A T ACHET GARANTIE LIMITE 1 an Pices Main-duvre 1 an 90 jours 90 jours GARANTIE Pioneer Electronics (USA) Inc. (PUSA) et Pioneer lectronique du Canada, Inc. (POC) garantissent que les produits distribus par PUSA aux tats-Unis et par POC au Canada qui, aprs avoir t installs et utiliss conformment au manuel de lutilisateur inclus avec lunit, ne fonctionnent pas de faon approprie dans des conditions dutilisation normales en raison dun vice de fabrication, seront rpars ou remplacs par une unit de valeur comparable, au choix de PUSA ou de POC, sans que vous deviez payer pour les pices ou les travaux de rparation. Les pices incluses en vertu de la prsente garantie peuvent tre neuves ou remises neuf, au choix de PUSA ou de POC. LA PRSENTE GARANTIE LIMITE SAPPLIQUE AU PROPRITAIRE INITIAL AINSI QU TOUT PROPRITAIRE SUBSQUENT DU PRSENT PRODUIT PIONEER PENDANT LA PRIODE DE GARANTIE, CONDITION QUE LE PRODUIT AIT T ACHET CHEZ UN DISTRIBUTEUR OU DTAILLANT PIONEER AUTORIS AUX TATS-UNIS OU AU CANADA. VOUS DEVREZ FOURNIR UN RELEV DE CAISSE OU UNE AUTRE PREUVE DACHAT VALIDE INDIQUANT LA DATE DE LACHAT INITIAL OU, SI VOUS LOUEZ LE PRODUIT, VOTRE CONTRAT DE LOCATION INDIQUANT LENDROIT ET LA DATE DE LA PREMIRE LOCATION. SI JAMAIS UN SERVICE DE RPARATION EST REQUIS, LE PRODUIT DOIT TRE EXPDI PENDANT LA PRIODE DE GARANTIE, EN PORT PRPAY, LINTRIEUR DU PAYS O LACHAT A T EFFECTU SEULEMENT, TEL QUIL EST EXPLIQU DANS LE PRSENT DOCUMENT. VOUS TES RESPONSABLE DU DMONTAGE ET DE LINSTALLATION DU PRODUIT. PUSA OU POC, LE CAS CHANT, PAIERA POUR VOUS RETOURNER LE PRODUIT RPAR OU REMPLAC, LINTRIEUR DU PAYS O LACHAT A T EFFECTU. PRIODE DE GARANTIE DES PRODUITS Produits audio et vido pour la maison
....................................................................................................... Micros, couteurs, stylets et cartouches phono ...................................................................................................... Dure des garanties rduites pour certains modles. Veuillez vous rfrer au document degarantie limite inclus avec le produit pour confirmer la dure de la garantie. La priode de garantie pour les clients qui louent le produit commence le jour o le produit est utilis pour la premire fois (a) pendant la priode de location ou (b) aprs la vente au dtail, selon ce qui se produit en premier. LMENTS NON COUVERTS PAR LA GARANTIE UN PRODUIT ACHET CHEZ UN DISTRIBUTEUR NON AUTORIS NEST COUVERT PAR AUCUNE GARANTIE EXPRESSE OU IMPLICITE, Y COMPRIS QUELQUE GARANTIE IMPLICITE DE QUALIT MARCHANDE OU DADAPTATION UN USAGE PARTICULIER QUE CE SOIT. DE PLUS, CE PRODUIT EST STRICTEMENT VENDU TEL QUEL ET AVEC TOUS SES DFAUTS VENTUELS . PIONEER NEST PAS RESPONSABLE DE QUELQUE DOMMAGE CONSCUTIF ET(OU) INDIRECT QUE CE SOIT. PIONEER NE GARANTIT PAS LES PRODUITS NUMRS CI-DESSUS LORSQUILS SONT UTILISS DES FINS COMMERCIALES OU PROFESSIONNELLES, OU AU SEIN DE TOUTE APPLICATION INDUSTRIELLE OU COMMERCIALE QUE CE SOIT. LA PRSENTE GARANTIE NE SAPPLIQUE PAS SI LE PRODUIT A T SOUMIS UNE PUISSANCE NOMINALE EXCDANT CELLE QUI A T TABLIE DANS LES DOCUMENTS SY APPLIQUANT. LA PRSENTE GARANTIE NE COUVRE PAS LES TLVISEURS OU LES CRANS ENDOMMAGS EN RAISON DE LAPPLICATION DIMAGES STATIQUES ET IMMOBILES PENDANT DE LONGUES PRIODES (IMAGES RMANENTES). LA PRSENTE GARANTIE NE COUVRE PAS LE COFFRAGE OU LES LMENTS ESTHTIQUES, LES ANTENNES INSTALLES PAR LUTILISATEUR, LES DOMMAGES AUX DISQUES OU AUX RUBANS OU DISQUES DENREGISTREMENT, LES DOMMAGES AU PRODUIT DCOULANT DUNE RETOUCHE, DUNE MODIFICATION NON AUTORISE PAR CRIT PAR PIONEER, DUN ACCIDENT, DUN USAGE INAPPROPRI OU DUN USAGE ABUSIF, LES DOMMAGES PRODUITS PAR LA FOUDRE OU LA SURTENSION, LES DOMMAGES SUBSQUENTS DCOULANT DE FUITES, LES DOMMAGES DCOULANT DE PILES DFECTUEUSES OU DE LUTILISATION DE PILES NON CONFORMES CELLES QUI SONT SPCIFIES DANS LE MANUEL DE LUTILISATEUR. LA PRSENTE GARANTIE NE COUVRE PAS LE COT DES PICES OU DE LA MAIN-DUVRE QUI SERAIENT AUTREMENT OFFERTES SANS FRAIS EN VERTU DE LA PRSENTE GARANTIE, SI ELLES SONT OBTENUES AUPRS DUNE SOURCE AUTRE QUUNE SOCIT DE SERVICE OU AUTRE AUTORISE OU DSIGNE PAR PIONEER. LA PRSENTE GARANTIE NE COUVRE PAS LES DFECTUOSITS OU LES DOMMAGES CAUSS PAR LUTILISATION DUNE MAIN-DUVRE OU DE PICES NON AUTORISES, NI DUN ENTRETIEN INADQUAT. LES NUMROS DE SRIE MODIFIS, OBLITRS OU ENLEVS ANNULENT LA PRSENTE GARANTIE DANS SA TOTALIT. INVALADIT DE TOUTE AUTRE GARANTIE AUX TATS-UNIS PIONEER LIMITE SES OBLIGATIONS EN VERTU DE TOUTE GARANTIE IMPLICITE QUE CE SOIT, Y COMPRIS ENTRE AUTRES LES GARANTIES IMPLICITES DE QUALIT MARCHANDE OU DADAPTATION UN USAGE PARTICULIER, UNE PRIODE NEXCDANT PAS LA PRIODE DE GARANTIE. AUCUNE GARANTIE NE SAPPLIQUE APRS LA PRIODE DE GARANTIE. CERTAINS TATS NE PERMETTENT PAS LA LIMITATION DE LA DURE DUNE GARANTIE IMPLICITE, ET CERTAINS NE PERMETTENT PAS LEXCLUSION OU LA LIMITATION DES DOMMAGES CONSCUTIFS OU INDIRECTS. LES LIMITATIONS ET EXCLUSIONS TABLIES CI-DESSUS PEUVENT DONC NE PAS SAPPLIQUER VOUS. LA PRSENTE GARANTIE VOUS DONNE DES DROITS LGAUX SPCIFIQUES. VOUS POUVEZ JOUIR DAUTRES DROITS, QUI PEUVENT VARIER DUN TAT LAUTRE. AU CANADA SOUS RSERVE DE CE QUI EST EXPRESSMENT STIPUL DANS LES PRSENTES, AUCUNE REPRSENTATION, GARANTIE, OBLIGATION OU CONDITION, QUELLE SOIT IMPLICITE, OBLIGATOIRE OU AUTRE, NE SAPPLIQUE CE PRODUIT. SERVICE PUSA et POC ont dsign un certain nombre de socits de service autorises partout aux tats-Unis et au Canada si jamais vous avez besoin de services de rparation pour votre produit. Pour profiter d'un tel service en vertu de la garantie, vous devez prsenter votre relev de caisse ou, si vous louez le produit, votre contrat de location indiquant l'endroit et la date de la transaction par le premier propritaire. Si vous expdiez l'unit, vous devez l'emballer soigneusement et l'envoyer une socit de service autorise, en port prpay et selon une mthode de transport pouvant tre suivie et assure. Emballez le produit au moyen de matriaux coussins adquats pour viter les dommages pendant le transport. La bote d'origine est idale cette fin. Incluez votre nom, votre adresse et un numro de tlphone o nous pouvons vous rejoindre pendant les heures de bureau. Pour toutes les plaintes et problmes aux tats-Unis, communiquez avec le service de Soutien la clientle au 1-800-421-1404. Au Canada, communiquez avec le groupe de Satisfaction de la clientle au 1-877-283-5901. Pour le raccordement ou le fonctionnement de votre unit, ou pour trouver une socit de service autorise, appelez ou crivez :
AUX TATS-UNIS PIONEER ELECTRONICS SERVICE, INC. P.O. BOX 1760 LONG BEACH, CALIFORNIA 90801 1-800-421-1404 http://www.pioneerelectronics.com DPARTMENT DE SERVICE AU CONSOMMATEUR AU CANADA PIONEER LECTRONIQUES DU CANADA, INC. 300 ALLSTATE PARKWAY MARKHAM, ON L3R 0P2
(905) 479-4411 1-877-283-5901 http://www.pioneerelectronics.ca RGLEMENT DES CONFLITS AUX TATS-UNIS - Si un conflit se produit entre vous et Pioneer aprs la rponse une demande initiale faite au service de Soutien la clientle, vous pouvez avoir recours au Programme de rsolution des plaintes de Pioneer pour rsoudre le conflit. Ce programme vous est offert sans frais. Vous devez avoir recours au Programme de rsolution des plaintes avant de vous prvaloir de vos droits ou de chercher rparation en vertu du Titre I de la loi Magnuson-Moss Warranty-Federal Trade Commission Improvement Act, 15 U.S.C. 2301 et s.s. Pour avoir recours au Programme de rsolution des plaintes, appelez au 1-800-421-1404 et expliquez au reprsentant du service la clientle qui vous rpondra le problme auquel vous faites face et les dmarches que vous avez entreprises pour faire rparer le produit pendant la priode de garantie, puis donnez-lui le nom du distributeur / dtaillant autoris auprs duquel vous vous tes procur le produit Pioneer. Une fois que votre plainte a t explique au reprsentant, un numro de rsolution vous sera communiqu. Pioneer tudiera le conflit et, dans un dlai de quarante (40) jours aprs la rception de votre plainte, (1) rpondra votre plainte par crit pour vous aviser des dmarches qu'elle entreprendra pour rsoudre le conflit, et indiquera combien de temps ces dmarches prendront ; ou (2) rpondra votre plainte par crit pour vous indiquer les raisons pour lesquelles elle n'entreprendra aucune dmarche. AU CANADA - Communiquez avec le directeur de la Satisfaction de la clientle au (905) 946-7446 pour discuter de votre plainte et rsoudre rapidement le problme. ENREGISTREZ LE LIEU ET LA DATE D'ACHAT POUR RFRENCE ULTRIEURE No. du modle : ___________________________________________________ No. deSrte : _________________________________________________________________ Date d'achat : ____________________________________________________ Achet de : ___________________________________________________________________ PRENEZ SOIN DE GARDER CETTE INFORMATION ET VOTRE REU D'ACHAT DANS UN ENDROIT SR POUR RFRENCE FUTURE
Should this product require service in the U.S.A. and you wish to locate the nearest Pioneer Authorized Independent Service Company, or if you wish to purchase replacement parts, operating instructions, service manuals, or accessories, please call the number shown below. 1 8 0 0 4 2 1 1 4 0 4 Please do not ship your product to Pioneer without first calling the Customer Support at the above listed number for assistance. Pioneer Electronics (USA), INC. Service Support Division 1925 E. Dominguez St. Long Beach, CA 90810-1003, U.S.A. For warranty information please see the Limited Warranty sheet included with your product. Should this product require service in Canada, please contact a Pioneer Canadian Authorized Dealer to locate the nearest Pioneer Authorized Service Company in Canada. Alternatively, please contact the Customer Satisfaction Department at the following address:
Pioneer Electronics of Canada, Inc. Customer Satisfaction Department 300 Allstate Parkway, Markham, Ontario L3R 0P2 1-877-283-5901 905-479-4411 For warranty information please see the Limited Warranty sheet included with your product. Si ce produit doit tre rpar au Canada, veuillez vous adresser un distributeur autoris Pioneer du Canada pour obtenir le nom du Centre de Service Autoris Pioneer le plus prs de chez-vous. Vous pouvez aussi contacter le Service la clientle de Pioneer:
Pioneer lectroniques du Canada, Inc. Service Clientle 300, Allstate Parkway, Markham, Ontario L3R 0P2 1-877-283-5901 905-479-4411 Pour obtenir des renseignements sur la garantie, veuillez vous reporter au feuillet sur la garantie restreinte qui accompagne le produit. S018_D_EF Published by Pioneer Corporation. Copyright 2009 Pioneer Corporation. All rights reserved. Publication de Pioneer Corporation. 2009 Pioneer Corporation. Tous droits de reproduction et de traduction rservs. PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: 1-877-283-5901, 905-479-4411 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11 PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555 PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300 PIONEER ELECTRONICS DE MEXICO S.A. DE C.V. Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270 Printed in China / Imprim en Chine
<8952-SB300-275-0>
K002_B_En
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2009-11-30 | 2404 ~ 2476 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2009-11-30
|
||||
1 | Applicant's complete, legal business name |
Pioneer Corporation
|
||||
1 | FCC Registration Number (FRN) |
0009070665
|
||||
1 | Physical Address |
28-8, Honkomagome 2-chome, Bunkyo-ku
|
||||
1 |
Tokyo, N/A 113-0021
|
|||||
1 |
Japan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@siemic.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
AJD
|
||||
1 | Equipment Product Code |
T107
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
M******** S********
|
||||
1 | Title |
Manager
|
||||
1 | Telephone Number |
81-49********
|
||||
1 | Fax Number |
81-49********
|
||||
1 |
m******@post.pioneer.co.jp
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Main Unit of Front Surround System HTP-SB300 | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Listed Power is Maximum conducted RF output power. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
ETL Inc
|
||||
1 | Name |
K******** C****
|
||||
1 | Telephone Number |
82-2-********
|
||||
1 | Fax Number |
82-2-********
|
||||
1 |
c******@etl.re.kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2404.00000000 | 2476.00000000 | 0.0038700 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC