FCC ID: AJDT105 Wireless Speaker Transmitter

En_XW-HTP550.book 1 Digital Wireless Speaker System Systeme de hp sans fil a signal XW-HTP550 Register your product at www.pioneerelectronics.com

Protect your new investment The details of your purchase will be on file for reference in the event of an insurance claim such as loss or theft.

Receive free tips, updates and service bulletins on your new product

Improve product development Your input helps us continue to design products that meet your needs.

Receive a free Pioneer newsletter Registered customers can opt in to receive a monthly newsletter. Operating Instructions Mode demploi En_XW-HTP550.book 2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulated

"dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION:

TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. D1-4-2-3_En ATTENTION DANGER DELECTROCUTION NE PAS OUVRIR Ce symbole de lclair, plac dans un triangle quilatral, a pour but dattirer lattention de lutilisateur sur la prsence, lintrieur du coffret de lappareil, de tensions dangereuses non isoles dune grandeur suffisante pour reprsenter un risque dlectrocution pour les tres humains. ATTENTION:

POUR VITER TOUT RISQUE DLECTROCUTION, NE PAS ENLEVER LE COUVERCLE (NI LE PANNEAU ARRIRE). AUCUNE PICE RPARABLE PAR LUTILISATEUR NE SE TROUVE LINTRIEUR. CONFIER TOUT ENTRETIEN UN PERSONNEL QUALIFI UNIQUEMENT. Ce point dexclamation, plac dans un triangle quilatral, a pour but dattirer lattention de lutilisateur sur la prsence, dans les documents qui accompagnent lappareil, dexplications importantes du point de vue de lexploitation ou de lentretien. D1-4-2-3_Fr Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. WARNING: Handling the cord on this product or cords associated with accessories sold with the product will expose you to lead, a chemical known to the State of California and other governmental entities to cause cancer and birth defects or other reproductive harm. Wash hands after handling. D36-P4_En WARNING: This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filed with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture. D3-4-2-1-3_A_En AVERTISSEMENT: Cet appareil nest pas tanche. Pour viter les risques dincendie et de dcharge lectrique, ne placez prs de lui un rcipient rempli deau, tel quun vase ou un pot de fleurs, et ne lexposez pas des gouttes deau, des claboussures, de la pluie ou de lhumidit. D3-4-2-1-3_A_Fr IMPORTANT NOTICE THE SERIAL NUMBER FOR THIS EQUIPMENT IS LOCATED IN THE REAR. PLEASE WRITE THIS SERIAL NUMBER ON YOUR ENCLOSED WARRANTY CARD AND KEEP IN A SECURE AREA. THIS IS FOR YOUR SECURITY. D1-4-2-6-1_En Nous vous remercions pour cet achat dun produit Pioneer. Nous vous demandons de lire soigneusement ce mode demploi ; vous serez ainsi mme de faire fonctionner lappareil correctement. Aprs avoir bien lu le mode demploi, le ranger dans un endroit sr pour pouvoir sy rfrer ultrieurement. Dans certains pays ou certaines rgions, la forme de la fiche dalimentation et de la prise dalimentation peut diffrer de celle qui figure sur les schmas, mais les branchements et le fonctionnement de lappareil restent les mmes.

[For Canadian model]

[Pour le modle Canadien]

CAUTION TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD. RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. ELECTRIQUES, NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGATEUR, UNE PRISE DE COURANT, OU UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT ETRE INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A DECOUVERT. D2-4-4-1_EF ATTENTION POUR PREVENIR LES CHOCS En_XW-HTP550.book 3 READ INSTRUCTIONS All the safety and operating instructions should be read before the product is operated. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. HEED WARNINGS All warnings on the product and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS All operating and use instructions should be followed. CLEANING The product should be cleaned only with a polishing cloth or a soft dry cloth. Never clean with furniture wax, benzine, insecticides or other volatile liquids since they may corrode the cabinet. ATTACHMENTS Do not use attachments not recommended by the product manufacturer as they may cause hazards. WATER AND MOISTURE Do not use this product near water for example, near a bathtub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. ACCESSORIES Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturers instructions, and should use a mounting accessory recommended by the manufacturer. CART A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. VENTILATION Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturers instructions have been adhered to. POWER SOURCES This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. LOCATION The appliance should be installed in a stable location. NONUSE PERIODS The power cord of the appliance should be unplugged from the outlet when left un-used for a long period of time. OBJECT AND LIQUID ENTRY Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. SERVICING Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. DAMAGE REQUIRING SERVICE Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

When the power-supply cord or plug is

damaged. If liquid has been spilled, or objects have fallen into the product. If the product has been exposed to rain or water. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. If the product has been dropped or damaged in any way.

When the product exhibits a distinct change in performance this indicates a need for service. REPLACEMENT PARTS When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. SAFETY CHECK Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. WALL OR CEILING MOUNTING The product should not be mounted to a wall or ceiling. HEAT The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. GROUNDING OR POLARIZATION

If this product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other), it will fit into the outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. If this product is equipped with a three-wire grounding type plug, a plug having a third

(grounding) pin, it will only fit into a grounding type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug.

POWER-CORD PROTECTION Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. OUTDOOR ANTENNA GROUNDING If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure A. LIGHTNING For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. OVERLOADING Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. GROUND CLAMP ELECTRIC SERVICE EQUIPMENT Fig. A ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20) GROUNDING CONDUCTORS

(NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM

(NEC ART 250, PART H) NEC NATIONAL ELECTRICAL CODE D1-4-2-2_En En_XW-HTP550.book 4 POWER-CORD CAUTION Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest PIONEER authorized service center or your dealer for a replacement. S002_En NOTE IMPORTANTE SUR LE CABLE DALIMENTATION Tenir le cble dalimentation par la fiche. Ne pas dbrancher la prise en tirant sur le cble et ne pas toucher le cble avec les mains mouilles. Cela risque de provoquer un court-circuit ou un choc lectrique. Ne pas poser lappareil ou un meuble sur le cble. Ne pas pincer le cble. Ne pas faire de noeud avec le cble ou lattacher dautres cbles. Les cbles dalimentation doivent tre poss de faon ne pas tre crass. Un cble abm peut provoquer un risque dincendie ou un choc lectrique. Vrifier le cble dalimentation de temps en temps. Contacter le service aprs-vente PIONEER le plus proche ou le revendeur pour un remplacement. S002_Fr This product is for general household purposes. Any failure due to use for other than household purposes

(such as long-term use for business purposes in a restaurant or use in a car or ship) and which requires repair will be charged for even during the warranty period. K041_En Ce produit est destin une utilisation domestique gnrale. Toute panne due une utilisation autre qu' des fins prives (comme une utilisation des fins commerciales dans un restaurant, dans un autocar ou sur un bateau) et qui ncessite une rparation sera aux frais du client, mme pendant la priode de garantie. K041_Fr CAUTION RISK OF ELECTRIC SHOCK. DRY LOCATION USE ONLY. ATTENTION RISQUE DE DECHARGE ELECTRIQUE. A UTILISER SEULE MENT DANS UN ENDROIT SEC.

[For Canadian model]

[Pour le modle Canadien]

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la Classe B est conforme la norme NMB-003 du Canada. D8-10-1-3_EF Information to User Alteration or modifications carried out without appropriate authorization may invalidate the users right to operate the equipment. D8-10-2_En NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. D8-10-1-2_En CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections. D8-10-3a_En Important We do not assume any liability for the damages incurred due to improper use of the product by the user or third party, malfunction during use, other troubles or use of the product, unless indemnity for damages is admitted by the law. Important Nous ne saurions accepter aucune responsabilit pour les dommages provenant de lemploi incorrect de lappareil, que ce soit le fait de lutilisateur ou dune tierce personne, pour les anomalies de fonctionnement, pour les inconvnients rsultant de lappareil, moins que des compensations soient clairement prvues par la loi. En_XW-HTP550.book 5

[For U.S. model]

Changes or modifications not expressly approved by the manufacturer (party responsible) for compliance could not void the users authority to operate the equipment. CAUTION:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and body (excluding extremities: hands, wrists and feet) and must not be co-located or operated with any antenna or transmitter.

[For Canadian model]

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

[Pour le modle canadien]

Lutilisation de lappareil est soumise aux deux conditions suivantes: (1) il ne provoque pas de brouillage, et (2) il peut supporter tous les brouillages, y compris ceux qui sont en mesure de provoquer une anomalie de fonctionnement de lappareil.

[For Canadian model]

To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

[Pour le modle canadien]

Pour viter le brouillage radiolectrique des metteurs ayant une licence, cet appareil doit tre utilis lintrieur des habitations et loin des fentres de manire assurer la protection maximale. Un quipement (ou son antenne dmission) lorsquil est install lextrieur ne peut tre utilis quaprs obtention dune licence. For safety in operation Do not use the system in the proximity of electronic equipment that requires high-

accuracy control or handling of very low-level signals.

The system may affect the electronic equipment, causing malfunction or accident. Examples of such electronic equipment:

Hearing aid, cardiac pacemaker, other electrical medical equipment, fire alarm, automatic door, and other automated control equipment. If you use a pacemaker or other electrical medical equipment, consult the manufacturer or dealer to check the effects of radio waves on it. Do not use the system in places where its use is prohibited, for example near aircraft equipment and in hospitals.

The system may affect electronic equipment or electrical medical equipment, causing an accident. Follow the instructions given by the aircraft company or medical institution. Par mesure de scurit Nutilisez pas lappareil au voisinage dautres quipements lectroniques qui exigent une trs grande prcision de commande ou qui traitent des signaux trs bas niveau.

Lappareil peut perturber ces quipements lectroniques, provoquer des anomalies de fonctionnement voire un accident. Exemples dquipements lectroniques concerns:

Appareils auditifs, stimulateurs cardiaques, autres appareils mdicaux, alarmes incendie, portes fonctionnement automatique, autres appareils commande automatique. Si vous portez un stimulateur cardiaque ou faites usage dun appareil mdical lectronique, il est conseill de consulter le fabricant ou le revendeur pour connatre quels effets les ondes radiolectriques peuvent avoir sur son fonctionnement. Nutilisez pas lappareil dans les lieux o son emploi est interdit, par exemple proximit dun avion ou dans un hpital.

Lappareil peut perturber ces quipements lectroniques, provoquer des anomalies de fonctionnement voire un accident. Respectez les instructions de la compagnie arienne ou de linstitution mdicale. En_XW-HTP550.book 6 Contents Contents ..........................................6 Whats in the box . 6 Connecting Up ................................7 Rear panel . 7 Rear panel connections . 8 Placing the speakers and wireless speaker system . 9 Whats in the box Please confirm that the following accessories are in the box when you open it.

AC adapter

RCA stereo cord Controls and Displays ..................10 Transmitter . 10 Wireless speaker . 10

Power cord Additional Information ................12 Taking care of the unit . 12 Troubleshooting . 14 Specifications . 15

These operating instructions

Warranty card 6 En En_XW-HTP550.book 7 Connecting Up Chapter 1 Connecting Up Rear panel Transmitter R IN L WIRELESS 1 2 AC IN Wireless speaker 3 1 WIRELESS IN L/R jacks 2 DC IN inlet 3 AC IN inlet 01 E n g l i s h 7 En En_XW-HTP550.book 8 01 Connecting Up Rear panel connections

When connecting, make sure that all components are switched off and unplugged. 1 WIRELESS IN L/R jacks Connect the WIRELESS IN L/R jacks on the transmitter to the WIRELESS OUT L/R jacks on the rear panel of the audio multi-channel receiver (SX-315), using the supplied RCA stereo cord. 2 DC IN inlet Connect the supplied AC adapter to the DC IN inlet on the rear panel of the transmitter, then plug into a power outlet. 3 AC power cord Connect the supplied AC power cord to the AC IN inlet on the rear panel of the wireless speaker, then plug into a power outlet. R IN L WIRELESS Transmitter To power outlet SPEAKERS SUB CENTER WOOFER SURROUND R L WIRELESS OUT L R

FRONT L R

SX-315 8 En 01 E n g l i s h En_XW-HTP550.book 9 Connecting Up Placing the speakers and wireless speaker system Where you put your speakers in the room has a big effect on the quality of the sound. The following guidelines should help you to get the best sound from your system.

The illustration below shows a typical speaker setup using the wireless speaker for multichannel sound.

The subwoofer can be placed on the floor. Ideally, the other speakers should be at about ear-level when youre listen-

ing to them. Putting the speakers on the floor (except the subwoofer), or mounting them very high on a wall is not recom-

mended.

For the best stereo effect, place the front speakers 69 ft. / 23 m apart, at equal distance from the TV.

For best surround sound, make sure to place the wireless speaker directly behind the center of the listening posi-

tion and no higher than ear level.

Placing the wireless speaker too far behind the listening position will result in little surround sound effect.

Install the center speaker above or below the TV so that the sound of the center channel is localized at the TV screen.

To compensate for channel delay with this system, you should adjust the sur-

round speaker distance setting in

(in the receiver ing your receiver setup manual) so that it is equal to the front speaker distance setting. Choos-

If you choose to install the center speaker on top of the TV, be sure to secure it by suitable means to reduce the risk of dam-

age or injury resulting from the speaker falling from the TV in the event of external shocks such as earthquakes.

Make sure that all speakers are securely installed. This not only improves sound quality, but also reduces the risk of dam-

age or injury resulting from speakers being knocked over or falling in the event of external shocks such as earthquakes.

The wireless speaker is not magnetically shielded and so should not be placed near a TV or monitor.

The wireless speaker can be used at distances of up to 33 ft. / 10m from the transmitter. This range may change depending on the environment.

Placing the transmitter and the wireless speaker too close together will result in an unstable signal. Make sure they are at more than 3.3 ft. / 1 m apart for the best reception. Transmitter/

SX-315 audio multi-channel receiver Front left CHANNEL Sub-

woofer Front right Center ON OFF POWER TUNED AC IN XW-HTP550 wireless speaker to power outlet 9 En En_XW-HTP550.book 10 02 Controls and Displays Chapter 2 Controls and Displays Transmitter 1 2 3 4 CHANNEL Wireless speaker 1 2 3 4 5 6 TUNED POWER OFF ON TUNED POWER OFF ON 10 En En_XW-HTP550.book 11 Controls and Displays 1 CHANNEL INDICATORS Light to indicate the selected channel. 2 CHANNEL In case of poor reception due to interference from other electrical devices, you can improve reception by selecting another channel. Each time you press the button, the channel changes sequentially:

CH 1 CH 2 CH 3 CH 4

Poor reception may cause the audio to be interrupted or stopped. This is not malfunction. Try changing the location or orientation of the transmitter and/or the wireless speaker to improve reception. 3 Antenna Transmits signals to the wireless speaker. 4 Lights when the signal from the transmitter is properly received. TUNED indicator POWER indicator 5 Lights when the wireless speaker is switched on. POWER 6 Press to switch the wireless speaker on or off.

The wireless speaker volume can be adjusted using the controls of the SX-315 Audio Multi-Channel Receiver. Please refer to the section Setting individual in the SX-315 manual. channel levels

The wireless speaker has an internal antenna. 02 E n g l i s h 11 En En_XW-HTP550.book 12 03 Additional Information Chapter 3 Additional Information Taking care of the unit Cleaning the units exterior

Use a polishing cloth or dry cloth to wipe off dust and dirt. If the surfaces are very dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with water and wrung out well, then wipe again with a dry cloth.

Do not use furniture wax or cleaners. Never use thinners, benzine or insecticide sprays or other chemicals on or near this unit since they will corrode the surfaces.

If you use a chemical-impregnated clean-

ing cloth, read the instructions carefully before use. These cloths may leave smear marks on half-mirror finish surfaces; if this happens, finish with a dry cloth.

Unplug the unit when cleaning. Problems with condensation Condensation may form inside the unit if it is brought into a warm room from outside, or if the temperature of the room rises quickly. Although the condensation wont damage the unit, it may temporarily impair its performance. For this reason you should leave it to adjust to the warmer temperature for about an hour before switching on and using. Hints on installation We want you to enjoy using this unit for years to come, so please bear in mind the following points when choosing a suitable location for it:

Do...

Use in a well-ventilated room.

Place on a solid, flat, level surface, such as a table, shelf or stereo rack.

Be sure to switch the wireless speaker off when not in use. Dont...

Use in a place exposed to high tempera-

tures or humidity, including near radia-

tors and other heat-generating appliances.

Place on a window sill or other place where the unit will be exposed to direct sunlight.

Use in an excessively dusty or damp envi-

ronment.

Place directly on top of an amplifier, or other component in your stereo system that becomes hot in use.

Use near a television or monitor as you may experience interferenceespecially if the television uses an indoor antenna.

Use in a kitchen or other room where the unit may be exposed to smoke or steam.

Use on a thick rug or carpet, or cover with cloththis may prevent proper cooling of the unit.

Place on an unstable surface, or one that is not large enough to support all four of the units feet. POWER Moving the wireless speaker If you need to move the wireless speaker, first on the top panel to turn the unit press off. Unplug the power cord. AC adapter and power cord caution

Do not leave the power cord near heating equipment. The coating of the cord may melt, which could lead to fire and/or elec-

trocution.

Make sure to grasp the body of the AC adapter when removing it from the power outlet. If you pull the power cord, it may become damaged which could lead to fire and/or electrocution.

Do not attempt to plug in or remove the AC adapter with wet hands. This may result in electrocution.

Insert the prongs of the AC adapter all the way into the power outlet. If the connec-

tion is incomplete, heat may be generated which could lead to fire. Furthermore, contact with the connected prongs of the adapter may result in electrocution. 12 En En_XW-HTP550.book 13 Additional Information

Do not insert the AC adapter into a power outlet where the connection remains loose despite inserting the prongs all the way into the outlet. Heat may be gener-

ated which could lead to fire. Consult with the retailer or an electrician regard-

ing replacement of the power outlet. Radio wave reflections The radio waves received by the wireless speaker include the radio wave coming directly from the transmitter (direct wave) and waves coming from various directions due to reflections by walls, furniture and building

(reflected waves). The reflected waves (due to obstacles and reflecting objects) further produce a variety of reflected waves as well as variation in reception condition depending on locations. If the audio cannot be received properly due to this phenomenon, try moving the location of the wireless speaker a little. Also note that audio may be interrupted due to the reflected waves when a person crosses or approaches the space between the transmitter and wireless speaker. Radio wave caution This wireless speaker system uses a 2.4 GHz radio wave frequency, which is a band used by other wireless systems (see list below). To prevent noise or interrupted communication, do not use this system nearby such devices, or make sure these devices are switched off during use. You can also try switching the channel on the transmitter (see Transmitter on page 10) for better reception.

Cordless phones

Cordless FAX units

Wireless broadband routers

Wireless AV equipment

Microwave-based health aids

Microwave ovens

Wireless controllers for game systems

Bluetooth equipment

Some baby monitors Other, less common, equipment that may operate on the same frequency:

Anti-theft systems

Warehouse logistic management systems

Amateur radio stations (HAM)

Discrimination systems for train or emergency vehicles

If the transmitter is used near A/V equipment with an antenna input terminal, such as a TV, VCR, BS tuner or CS tuner, you may experience noise interference on a TV near the transmitter. In such cases, place the transmitter at a larger distance from the antenna input terminal of the A/V equipment.

If there is something obstructing the path between the transmitter and the wireless speaker (such as a metal door, concrete wall, or insulation containing tinfoil), you may need to change the location of your system to prevent signal noise and interruptions. Scope of operation Use of this equipment is limited to home use.

(Transmission distances may be reduced depending on communication environments.) In the following locations, poor condition or inability to receive radio waves may cause the audio to be interrupted or stopped:

In reinforced concrete buildings or steel-

framed or iron-framed buildings.

Near large metallic furniture.

In a crowd of people or near a building or obstacle.

In a location exposed to the magnetic field, static electricity or radio wave inter-

ference from radio communication equipment using the same frequency band (2.4 GHz) as this system, such as a Bluetooth device, radio LAN device or microwave oven.

If you live in a heavily populated residen-

tial area (apartment, townhouse, etc.) and if your neighbors microwave is placed near your system, you may experi-

ence radio wave interference or no sound from the speaker. If this occurs, move your unit to a different place. When the microwave is not in use, there will be no radio wave interference. 03 E n g l i s h 13 En En_XW-HTP550.book 14 03 Additional Information Troubleshooting

Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest PIONEER autho-

rized service center or your dealer to carry out repair work.

If you are experiencing problems with the wireless speaker system, make sure to bring both the transmitter and the wireless speaker in for repair so that they can be tested properly. Symptom Cause & Remedy The power does not turn on. Audio is interrupted.

Make sure the supplied power cord (or AC adapter) is fully inserted into the AC IN inlet (or DC IN inlet).

Connect the power plug to the wall outlet.

Disconnect the power plug from the outlet, and insert again.

This system uses high frequency radio waves that have properties similar to light, such as linearity, reflection, refraction, diffraction, and interference. Therefore, placement of the system can result in weak radio waves and/or interruption.

The distance between the transmitter and be too large. Use the wave from the transmitter. wireless speaker wireless speaker may within the reach of radio

The system may be close to a location generating electrical noise. If this is the case, find a location that does not affect the sound adversely. Audio is suddenly interrupted. There may be radio communication equipment using the same frequency band (2.4 GHz) as this system, such as a Bluetooth device, radio LAN device or microwave oven, operating nearby. Audio cannot be received.

The radio wave reception is variable depending on locations due to the effects of obstacles and reflecting objects. Try changing the location of the wireless speaker a little.

The transmitter and wireless speaker are designed and sold as a pair, and they identify each other in communication. This means that communication is not available between separately purchased transmitter and wireless speaker. Horizontal stripe noise inter-

ference on a TV set near the transmitter.

Is there a piece of A/V equipment with an antenna near the transmitter? If so, move the transmitter away from the antenna input terminal of the AV equipment. Caution Static electricity or other external influence may cause malfunctioning of this unit. In this case, unplugging the power cord and then re-plugging it in will usually reset the unit for proper operation. If this does not correct the problem, please consult your nearest PIONEER service center. 14 En En_XW-HTP550.book 15

The specifications and design of this product are subject to change without notice, due to improvement. Additional Information Specications General Digital Wireless Speaker System

(Transmitter/Wireless speaker) Transmitter AC adapter Power requirements. AC 120 V, 60 Hz Power consumption . 8 W Rated output . 12 V / 300 mA Power consumption (without AC adapter)

. 2 W Input . RCA jack Weight . 0.3 kg / 11 oz. Dimensions . 166(W) x 56(H) x 112(D) mm

(D) in.

(W) x 2

(H) x 4 16 16 16 9 3 7

Wireless Speaker 6 Power requirements . AC 120 V, 60 Hz Power consumption . 24 W Amplifier characteristics Continuous average power output of 7.5 watts* per channel, min., at 4 ohms, from 120 Hz to 20,000 Hz with no more than 1.0

% total harmonic distortion. Continuous power output

. 7.5 W/ch(120 Hz 20 kHz, 1.0 %, 4 Maximum power output

. 10 W/ch RMS (1 kHz, THD 10 %, 4 Music power output

. 18 W/ch (DIN MUSIC, 10 %, 4

* Measured pursuant to the Federal Trade Commissions Trade Regulation rule on Pow-

er Output Claims for Amplifiers. Speaker unit. 7 cm cone type x 2 Weight . 2.9 kg / 6 lbs 6 oz. Dimensions

. 461.5(W) x 176.5(H) x 95(D) mm

(D) in.

(W) x 6

(H) x 3 18 16 16 15 4 3 3

) Accessories AC adapter . 1 RCA stereo cord . 1 Power cord. 1 These operating Instructions . 1 Warranty card . 1 Published by Pioneer Corporation. Copyright 2004 Pioneer Corporation. All rights reserved. 03 E n g l i s h 15 En FR_XW-HTP550.book 6 Table des matires Contenu de lemballage Veuillez vous assurer que les accessoires suivants ont t livrs avec lappareil lorsque vous ouvrez son emballage. Adaptateur secteur Table des matires .........................6 Contenu de lemballage . 6 Connexions .....................................7 Panneau arrire . 7 Connexions au panneau arrire . 8 Disposition des enceintes ordinaires et de l'enceinte sans fil . 9 Commandes et afficheurs ............10 Transmetteur . 10 Enceinte sans fil . 10 Informations complmentaires ..12 Soin de lappareil . 12 Guide de dpannage . 15 Caractristiques techniques . 16 Cordon stro fiches Cinch (RCA) Cordon dalimentation Ce mode demploi Carte de garantie 6 Fr FR_XW-HTP550.book 7 Connexions Chapitre 1 Connexions Panneau arrire Transmetteur R IN L WIRELESS 1 2 AC IN Enceinte sans fil 3 1 2 3 Prises WIRELESS IN L/R Entre DC IN Entre AC IN 01 F r a n a i s 7 Fr FR_XW-HTP550.book 8 01 Connexions Connexions au panneau arrire Avant deffecteur quelque connexion que ce soit, assurez-vous que tous les appareils sont hors tension ou que la fiche de leur cordon d'alimentation est dbranche. Prises WIRELESS IN L/R 1 Au moyen du cordon stro fourni, reliez la prise WIRELESS IN L/R de du transmetteur la prise WIRELESS OUT L/R du rcepteur audio a voies multi-canaux (SX-315). R IN L WIRELESS Transmetteur Entre DC IN 2 Reliez le cordon de ladaptateur secteur fourni la prise DC IN place sur le panneau arrire de du transmetteur puis branchez ladaptateur lui-mme sur une prise secteur. 3 Cordon d'alimentation secteur Reliez le cordon dalimentation secteur la prise AC IN place sur le panneau arrire de lenceinte sans fil et branchez sa fiche sur une prise secteur. Vers la prise d'alimentation secteur SPEAKERS SUB CENTER WOOFER SURROUND R L WIRELESS OUT L R

FRONT L R

SX-315 8 Fr FR_XW-HTP550.book 9 Connexions Disposition des enceintes ordinaires et de l'enceinte sans fil La disposition des enceintes dans la pice joue un rle essentiel sur la qualit des sons. Les rgles suivantes doivent vous aider tirer le meilleur parti de votre chane strophonique. Lillustration qui suit propose une dispo-

sition typique des enceintes, y compris lenceinte sans fil, pour la restitution de plusieurs voies. Le caisson de graves peut tre pos sur le sol. Dans lidal, les autres enceintes doivent se trouver hauteur de vos oreilles quand vous tes en position dcoute. Il n'est pas conseill de poser les enceintes sur le plancher (sauf pour le caisson de graves) ni de les installer trs en hauteur. Pour bnficier d'un effet strophonique optimal, les enceintes doivent tre spares de 2 3 m et gale distance du tlviseur. Pour obtenir une bonne reproduction des effets dambiance, veillez ce que lence-

inte sans fil soit bien au centre et derrire la position d'coute et pas plus haute que les oreilles. Si lenceinte sans fil est trop loigne de la position d'coute, les effets sonores d'ambiance sont mdiocres. Installez lenceinte centrale au-dessus ou au-dessous du tlviseur, cela pour que les sons de la voie centrale semblent pro-

venir de lcran du tlviseur. Pour compenser les diffrences de marche entre les voies de ce systme, vous devez rgler le paramtre de distance des enceintes comme il est dit au paragraphe Choix de la configuration

(mode d'emploi du rcepteur) de du rcepteur telle sorte qu il ait une valeur gale la moiti de la distance des enceintes avant. enceinte cen-

Si vous choisissez de poser l immobiliser trale sur le tlviseur, veillez l de faon adquate pour rduire les risques de dommages et de blessures dcoulant enceinte en cas de secous-

d'une chute de l ses, par exemple en raison d'un sisme. Assurez-vous que les enceintes sont installes en toute scurit. Cela amliore la qualit sonore et rduit les risques de dommages et de blessures dcoulant d'une chute d'enceinte en cas de secous-

ses, par exemple en raison d'un sisme. enceinte sans fil n'a pas reu un blindage magntique et ne doit donc pas se trouver proximit du tlviseur ou du moniteur. Lenceinte sans fil peut tre utilise une distance de 10 m du transmetteur. La porte de ce dernier varie en fonction de lenvironnement. Placer du transmetteur et l enceinte trop un de l'autre conduit la production prs l d'un signal instable. Veillez ce que ces deux appareils soient spars par un mtre pour que la rception soit bonne. L Transmetteur/

Rcepteur audio a voies multi-canaux SX-315 Avant G CHANNEL Caisson des graves Avant D Centre ON OFF POWER TUNED AC IN Vers une prise secteur Enceinte sans fil XW-HTP550 01 F r a n a i s 9 Fr FR_XW-HTP550.book 10 02 Commandes et afficheurs Chapitre 2 Commandes et afcheurs Transmetteur 1 2 3 4 CHANNEL 1 2 3 Enceinte sans l 4 5 6 TUNED POWER OFF ON TUNED POWER OFF ON 10 Fr FR_XW-HTP550.book 11 Commandes et afficheurs 1 CHANNEL INDICATORS Le tmoin correspondant au canal utilis, s'claire. 2 CHANNEL Si la rception est mdiocre du fait de brouillage provoqu par d'autres appareils lectriques, tentez de l'amliorer en slectionnant un autre canal. Chaque pression sur la touche slectionne un autre canal, dans l ordre:

CH 1 CH 2 CH 3 CH 4 Lorsque la rception est mdiocre, le son peut tre interrompu ou trs affaibli. Il ne un dfaut de fonctionnement sagit pas d de lappareil. Tentez d'abord de changer lemplacement du transmetteur ou son orientation, puis procdez pareillement avec lenceinte sans fil. Tmoin TUNED 3 Antenne Elle met les signaux destins l'enceinte sans fil. 4 Il sclaire lorsque le signal provenant de transmetteur est reu convenablement. 5 Il sclaire lorsque lenceinte sans fil est en service. 6 Appuyez sur cette touche pour allumer lappareil ou le mettre en veille. Tmoin POWER POWER Le niveau de sortie de lenceinte sans fil peut tre rgl au moyen des com-

mandes que porte le rcepteur audio a voies multi-canaux SX-315. Veuillez vous reporter la section Rglage des niveaux du mode demploi de canaux individuels du SX-315. Lenceinte sans fil possde une antenne intrieure. 02 F r a n a i s 11 Fr FR_XW-HTP550.book 12 03 Informations complmentaires Chapitre 3 Informations complmentaires Soin de lappareil Nettoyage de lextrieur de lappareil Utilisez un torchon de nettoyage ou un chiffon sec pour enlever la poussire et la salet. Si les surfaces sont trs sales, net-

toyez-les avec un chiffon doux humect dun produit nettoyant neutre dilu cinq ou six fois dans de leau, essorez soi-

gneusement le chiffon et terminez avec un autre chiffon sec. N'utilisez ni cire pour les meubles ni autres produits de nettoyage. N'utilisez ni diluants, ni essence, ni insecticides en bombe arosol, ni aucun produit chimique, que ce soit directement sur l'appareil ou proximit car cela pourrait endommager les surfaces. Si vous utilisez un chiffon imprgn de produits chimiques, respectez attentive-

ment les instructions d'utilisation. Ces chiffons peuvent laisser des marques sur les surfaces vitres; dans ce cas, essuyez avec un chiffon sec. Dbranchez lappareil lors de son nettoy-

age. Problmes lis la condensation De la condensation risque de se former lintrieur de lappareil si vous le transportez de lextrieur dans une pice chaude, ou si la temprature de la pice augmente rapidement. Bien que la condensation ne puisse pas endommager lappareil, elle risque de dgrader provisoirement ses performances. Pour cette raison, attendez environ une heure, le temps pour lappareil de prendre la temprature ambiante plus leve, avant de lallumer et de lutiliser. Conseils dinstallation Nous souhaitons que vous puissiez utiliser cet appareil pendant de nombreuses annes;

les consignes suivantes vous aideront choisir un emplacement adquat:

12 Fr Ce que vous devez faire Utiliser lappareil dans une pice bien are. Placer lappareil sur une surface horizon-

tale stable, telle quune table, une tagre ou un rack stro. Ne pas oublier de couper lalimentation de lenceinte sans fil quand elle n'est pas utilise. Ce que vous ne devez pas faire Utiliser lappareil dans un endroit o il sera expos des tempratures ou un degr dhumidit levs, y compris proximit de radiateurs ou autres appa-

reils de chauffage. Placer lappareil devant une fentre ou tout autre endroit o il serait directement expos au soleil. Utiliser lappareil dans un environment trs poussireux ou trs humide. Placer lappareil directement au-dessus dun amplificateur, ou autre composant de votre chane stro susceptible de dgager de la chaleur au cours de son utilisation. Utiliser lappareil proximit dun tlvi-

seur ou dun moniteur; en effet, il risque de provoquer des brouillages, notam-

ment si le tlviseur est quip dune antenne interne. Utiliser lappareil dans une cuisine ou toute autre pice o il serait expos la fume ou la vapeur. Poser lappareil sur de la moquette ou un tapis pais, le recouvrir d'un linge; vous empcheriez son refroidissement cor-

rect. Placer lappareil sur une surface instable ou trop petite pour porter les quatre pieds de son socle. Avant de dplacer l'enceinte sans fil Avant de dplacer lenceinte sans fil, mettez-la hors service en appuyant sur linterrupteur place sur le panneau suprieur. POWER Dbranchez la fiche du cordon dalimentation. FR_XW-HTP550.book 13 Informations complmentaires Prcautions concernant l'adaptateur secteur et le cordon d'alimentation Ne conservez pas le cordon dalimenta-

tion proximit d'un appareil de chauf-

fage. Lisolant pourrait fondre, ce qui pourrait entraner un incendie ou une lectrocution. Pour dbrancher ladaptateur au niveau de la prise secteur, veillez saisir ladaptateur lui-mme. Si vous tirez sur le cordon dalimentation, vous risquez de lendommager, ce qui peut entraner un incendie ou une lectrocution. Ne branchez pas, ne dbranchez pas ladaptateur secteur quand vous avez les mains mouilles. Vous pourriez vous lectrocuter. Veillez ce que les broches de ladaptateur soient compltement intro-

duites dans la prise secteur. Si la connex-

ion n'est pas totale, de la chaleur peut se dgager, ce qui peut provoquer un incendie. De plus, tout contact avec la partie nu des broches de ladaptateur peut entraner une lectrocution. Ne branchez pas ladaptateur secteur sur une prise qui n'assurerait pas un contact troit, mme lorsque les broches sont entirement introduites dans la prise. De la chaleur peut se dgager, ce qui peut entraner un incendie. Consultez un revendeur ou un lectricien si la prise secteur doit tre remplace. Rflexions des ondes radiolectriques Les ondes reues par lenceinte sans fil se composent dondes provenant directement du transmetteur (ondes directes) et dondes qui ont t rflchies par les murs, le plafond et les meubles (ondes rflchies). Les ondes rflchies (quelles proviennent dobstacles ou dobjets) engendrent dautres ondes rflchies et des variations dans les conditions de rception en chaque point de la pice. Si vous notez que la rception est mdiocre, dplacez un peu lenceinte sans fil. Sachez aussi que le signal sonore peut sinterrompre, en raison des ondes rflchies, au moment o une personne traverse ou sapproche de lespace qui spare du transmetteur et lenceinte sans fil. Prcautions concernant les ondes radio Cette enceinte sans fil travaille la frquence de 2,4 GHz, cest--dire dans une bande qui est rserve aux systmes sans fil (reportez-

vous la liste ci-dessous). Pour viter les brouillages et les interruptions de communication, nutilisez pas cet appareil proximit dautres systmes travaillant dans la mme bande, ou bien veillez les mettre hors tension. Pour amliorer la rception, vous pouvez galement slectionner un autre canal dmission (reportez-vous Transmetteur la page 10). Tlphone sans fil Tlcopieur sans fil Routeur sans fil large bande Appareil audiovisuel sans fil Aides mdicales micro-ondes Fours micro-ondes Contrleurs sans fil pour jeux Appareil Bluetooth Appareils de surveillance pour les bbs Autres appareils, moins courants, mais pouvant travailler dans la mme bande de frquence:

Systmes antivol Systmes de gestion des magasins Station de radio-amateur (HAM) Systmes discriminatifs pour les trains et les vhicules durgence Si du transmetteur est plac au voisinage dun appareil audiovisuel quip dune antenne, par exemple un tlviseur, un magntoscope, un syntoniseur pour satellite ou un syntoniseur CS, vous pouvez constater le brouillage du tlviseur plac prs du transmetteur. Si cela se produit, loignez du transmetteur de la borne dentre antenne de lappareil audiovisuel. 03 F r a n a i s 13 Fr FR_XW-HTP550.book 14 03 Informations complmentaires Si un obstacle se trouve sur le trajet entre du transmetteur et lenceinte sans fil (par exemple, une porte mtallique, un mur en bton ou un isolant thermique avec pare-

vapeur en aluminium), il se peut que vous soyez contraint de modifier lemplacement de lappareil pour viter les brouillages et les interruptions de propagation. Domaine d'utilisation de l'appareil Cet appareil a t conu pour une utilisation domestique.

(La distance de transmission peut tre rduite en fonction de lenvironnement.) Dans les cas suivants, les conditions de rception peuvent se dgrader au point que le son soit interrompu ou trs affaibli:

lintrieur dun btiment en bton ou dun habitation ayant une structure mtallique. Prs dun meuble mtallique de grande taille. Dans la foule, au voisinage dun btiment ou lombre d'un obstacle. Dans les endroits exposs au champ magntique, llectricit statique ou au brouillage radiolectrique dus des quipements de communication travail-

lant dans la mme gamme de frquence

(2,4 GHz) que celle de cet ensemble, par exemple les appareils Bluetooth ou ceux des rseaux locaux radiolectriques, ou encore les fours micro-ondes. Si vous habitez dans une zone trs peu-

ple (appartements, immeubles rsiden-

tiels, etc.) et si un de vos voisins possde un four micro-ondes install dans une pice proche de votre ensemble, il se peut que vous notiez des brouillages radiolectriques ou que lenceinte n'mette aucun son. En ce cas, placez lappareil dans un autre endroit. Lorsque le four micro-ondes n'est pas utilis, il ne peut pas produire de brouillage radiolectrique. Attention Llectricit statique ou d'autres causes extrieures peuvent provoquer une anomalie de fonctionnement. En ce cas, dbrancher la fiche du cordon d'alimentation puis la rebrancher suffit en gnral rtablir les conditions normales. Si cela nest pas le cas, consultez un centre d'entretien agr par PIONEER. 14 Fr FR_XW-HTP550.book 15 Informations complmentaires Guide de dpannage Une erreur d utilisation est souvent prise pour un dfaut ou une anomalie de fonctionne-

ment. Si vous pensez que le fonctionnement de l abord appareil est anormal, vrifiez tout d ce qui suit. Si cela ne vous permet pas de corriger la situation, consultez un centre d entre-

tien agr par PIONEER ou encore le revendeur pour obtenir la rparation de l appareil. Si vous constatez une anomalie dans le fonctionnement de lenceinte sans fil, apportez ensemble pour rparation du transmetteur et lenceinte sans fil de faon que lessai de lensemble puisse tre ralis. Symptmes Causes probables et remdes Lalimentation lectrique nest pas fournie. Le son est coup. Assurez-vous que la fiche du cordon d alimentation fourni adaptateur secteur) est branche fond sur la

(ou de l prise secteur (ou la prise DC IN). Branchez le cordon dalimentation sur une prise du secteur. Retirez la fiche du cordon dalimentation hors de la prise et insrez-la nouveau. Cet ensemble utilise des ondes radiolectriques trs haute frquence qui en termes de propagation, de rflexion, de rfraction, de diffraction et de brouillage prsentent des proprits voisines de celles de la lumire. En consquence l une rception mdiocre, voire une interruption de la rception des ondes radiolectriques. emplacement choisi peut conduire La distance entre du transmetteur et une peut tre trop grande. Utilisez l'

zone couverte par les ondes radiolectriques provenant du transmetteur. enceinte sans fil enceinte sans fil dans la Lensemble est peut-tre trop prs dun appareil produisant du bruit lectrique. En ce cas, recherchez un endroit o les sons ne sont pas perturbs. Le son est soudainement coup. Il se peut qu'un appareil de type Bluetooth, un quipement de rseau local radiolectrique ou un four micro-ondes, travaillant dans la mme gamme de frquence (2,4 GHz) soit en fonctionnement dans le voisinage. Il est impossible de recevoir le son. La rception des ondes radiolectriques dpend de lemplacement choisi en raison des obstacles et des rflexions possibles. Tentez de dplacer lgrement lenceinte sans fil. Du transmetteur et lenceinte sans fil sont conus comme une paire et vendus comme tels; ils sidentifient lun lautre pendant les communications. Cela veut dire que les communications sont impossibles entre du transmetteur et lenceinte sans fil achets sparment. Une bande de bruit horizontale apparat sur l'cran du tlviseur plac prs du transmetteur. Un appareil audiovisuel possdant une antenne est-il install prs du transmetteur? Si oui, loignez du transmetteur de la borne d'entre antenne de lappareil audiovisuel. 03 F r a n a i s 15 Fr FR_XW-HTP550.book 16 03 Informations complmentaires Caractristiques techniques Gnralits Systeme de hp sans fil a signal

(Transmetteur / Enceinte sans fil) Transmetteur Adaptateur secteur Alimentation. 120 V CA, 60 Hz Consommation . 8 W Sortie nominale . 12 V CC, 300 mA Consommation (sans adaptateur secteur)

. 2 W Entre . Prise Cinch (RCA) Poids . 0,3 kg / 11 oz. Dimensions. 166 (L) x 56 (H) x 112 (P) mm Les caractristiques et la prsentation peuvent tre modifies, sans avis pralable, dans un souci d amlioration. Enceinte sans fil Alimentation . 120 V CA, 60 Hz Consommation . 24 W Caractristiques de lamplificateur Puissance de sortie continue moyenne de 7,5 W* par canal, une rsistance minimale de 4 ohms, de 120 20 000 Hz, avec une distorsion harmonique totale maximale de 1,0 %. Puissance de sortie continue

. 7,5 W/voie (120 Hz 20 kHz, 1,0 %, 4

) Puissance de sortie maximum . 10 W/voie

) valeur efficace (1 kHz, DHT 10 %, 4 Puissance musicale

. 18 W/voie(MUSIQUE DIN, 10 %, 4

* Mesure conforme la rglementation commerciale de la Commission fdrale du commerce sur les exigences de puissance de sortie des amplificateurs. Haut-parleur

. Membrane conique de 7 cm x 2 Poids . 2,9 kg / 6 lbs 6 oz. Dimensions. 461,5(L) x 176,5(H) x 95(P) mm

) Accessoires Adaptateur secteur. 1 Cordon stro fiches Cinch (RCA). 1 Cordon dalimentation . 1 Ce mode demploi . 1 Carte de garantie . 1 Publication de Pioneer Corporation. Copyright 2004 Pioneer Corporation. Tous droits rservs. 16 Fr FR_XW-HTP550.book 17 Informations complmentaires Selecting fine audio equipment such as the unit youve just purchased is only the start of your musical enjoyment. Now its time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Associations Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion-and, most importantly, without affecting your sensitive hearing. Sound can be deceiving. Over time your hearing comfort level adapts to higher volumes of sound. So what sounds normal can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts. To establish a safe level:

Start your volume control at a low setting. Slowly increase the sound until you can hear it comfortably and clearly, and without distortion. Once you have established a comfortable sound level:

Set the dial and leave it there. Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you listening for a lifetime. We Want You Listening For A Lifetime Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing damage from loud noise is often undetectable until it is too late, this manufacturer and the Electronic Industries Associations Consumer Electronics Group recommend you avoid prolonged exposure to excessive noise. This list of sound levels is included for your protection. Decibel Level Example Living room, refrigerator, bedroom away from traffic Light traffic, normal conversation, quiet office 30 Quiet library, soft whispers 40 50 60 Air conditioner at 20 feet, sewing machine 70 Vacuum cleaner, hair dryer, noisy restaurant 80 Average city traffic, garbage disposals, alarm clock at two feet. THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE 90 Subway, motorcycle, truck traffic, lawn mower 100 Garbage truck, chain saw, pneumatic drill 120 Rock band concert in front of speakers, thunderclap 140 Gunshot blast, jet plane 180 Rocket launching pad Information courtesy of the Deafness Research Foundation. S001_En 03 F r a n a i s 17 Fr FR_XW-HTP550.book 18 Should this product require service in the U.S.A. and you wish to locate the nearest Pioneer Authorized Independent Service Company, or if you wish to purchase replacement parts, operating instructions, service manuals, or accessories, please call the number shown below. 8 0 0 4 2 1 1 4 0 4 Please do not ship your product to Pioneer without first calling the Customer Support Division at the above listed number for assistance. Pioneer Electronics (USA) Inc. Customer Support Division P.O. BOX 1760, Long Beach, CA 90801-1760, U.S.A. For warranty information please see the Limited Warranty sheet included with your product. Should this product require service in Canada, please contact a Pioneer Canadian Authorized Dealer to locate the nearest Pioneer Authorized Service Company in Canada. Alternatively, please contact the Customer Satisfaction Department at the following address:

Pioneer Electronics of Canada, Inc. Customer Satisfaction Department 300 Allstate Parkway, Markham, Ontario L3R OP2 1(877)283-5901 For warranty information please see the Limited Warranty sheet included with your product. Si ce produit doit tre rpar au Canada, veuillez vous adresser un distributeur autoris Pioneer du Canada pour obtenir le nom du Centre de Service Autoris Pioneer le plus prs de chez vous. Vous pouvez aussi contacter le Service la clientle de Pioneer:

Pioneer lectroniques du Canada, Inc. Service la clientle 300, Allstate Parkway, Markham, Ontario L3R OP2 1(877)283-5901 Pour obtenir des renseignements sur la garantie, veuillez vous reporter au feuillet sur la garantie restreinte qui accompagne le produit. S018_A_EF Published by Pioneer Corporation. Copyright 2004 Pioneer Corporation. All rights reserved. PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: 1-877-283-5901 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11 PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555 PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300 PIONEER ELECTRONICS DE MEXICO S.A. DE C.V. Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270

<04K00001>

Printed in / Imprim au K002_A_En

<ARE7353-B>