all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User manual | Users Manual | 2.35 MiB | March 15 2021 | |||
1 |
|
Internal Photos | Internal Photos | 2.48 MiB | March 15 2021 | |||
1 |
|
External Photos | External Photos | 980.14 KiB | March 15 2021 | |||
1 |
|
Label | ID Label/Location Info | 316.84 KiB | March 15 2021 | |||
1 |
|
Agent Authorization Rev 1.0 | Cover Letter(s) | 23.44 KiB | March 15 2021 | |||
1 | Block Diagram | Block Diagram | March 15 2021 | confidential | ||||
1 |
|
FCC Short & Long Term Confidentiality | Cover Letter(s) | 302.81 KiB | March 15 2021 | |||
1 | Operation Description | Operational Description | March 15 2021 | confidential | ||||
1 |
|
RF exposure | RF Exposure Info | 1.21 MiB | March 15 2021 | |||
1 | Schematic | Schematics | March 15 2021 | confidential | ||||
1 |
|
Test Setup | Test Setup Photos | 286.18 KiB | March 15 2021 | |||
1 |
|
VREC-DZ700DC FCC Test Report WiFi 1 | Test Report | 5.10 MiB | March 15 2021 | |||
1 |
|
VREC-DZ700DC FCC Test Report WiFi 2 | Test Report | 4.97 MiB | March 15 2021 | |||
1 |
|
VREC-DZ700DC FCC Test Report WiFi 3 | Test Report | 2.32 MiB | March 15 2021 |
1 | User manual | Users Manual | 2.35 MiB | March 15 2021 |
This guide is intended to guide you through the basic functions of this unit. For details, please refer to the Owners manual stored on the website. https://www.pioneerelectronics.com in Canada https://www.pioneerelectronics.ca https://www.pioneerelectronics.com au Canada https://www.pioneerelectronics.ca Ce guide est destin vous guider travers les fonctions de base de cette unit. Pour plus de dtails, veuillez consulter le mode demploi stock sur le site Web. VREC-DZ700DC DASH CAMERA CAMRA EMBARQUE Quick Start Guide Guide de dmarrage rapide PIONEER CORPORATION 28-8, Honkomagome 2-chome, Bunkyo-ku, Tokyo 113-0021, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 experience in mobile electronics, set up and install this product. Secure all wiring with cable clamps or electrical tape. Do not allow any bare wiring to remain exposed. Precautions before installation WARNING Do not install this product where it may
(i) obstruct the drivers vision,
(ii) impair the performance of any of the vehicles operating systems or safety features, including airbags, hazard lamp buttons or impair the drivers ability to safely operate the vehicle.
(iii) Never install this product in front of or next to the place in the dashboard, door, or pillar from which one of your vehicles airbags would deploy. Please refer to your vehicles owners manual for reference to the deployment area of the frontal airbags. CAUTION To ensure proper installation, be sure to use the supplied parts in the manner specified. If any parts are not supplied with this product, use compatible parts in the manner specified after you have the parts compatibility checked by your dealer. If parts other than supplied or compatible ones are used, they may damage internal parts of this product or they may work loose and the product may become detached. Do not install this product in places subject to high temperatures or humidity, such as:
Places close to a heater, vent or air conditioner. Places that may be exposed to rain, such as close to the door. English User Information Alteration or modifications carried out without appropriate authorization may invalidate the users right to operate the equipment. Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compli-
ance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful inter-
ference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be in-
stalled and operated with minimum distance 20cm between the radiator & body. This device contains license-exempt transmit-
ter(s)/receiver(s) that comply with Innova-
tion, Science and Economic Development Canadas license-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause unde-
sired operation of the device. This equipment complies with IC exposure limits set forth for an uncontrolled envi-
ronment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body. FEDERAL COMMUNICATIONS COMMISSION SUPPLIERS DECLARATION OF CONFORMITY Product Name: DASH CAMERA Model Number: VREC-DZ700DC Responsible Party Name: PIONEER ELEC-
TRONICS (USA) INC. SERVICE SUPPORT DIVISION Address: 2050 W. 190TH STREET, SUITE 100, TORRANCE, CA 90504, U.S.A. Phone: 1-800-421-1404 URL: https://www.pioneerelectronics.com After-sales service for Pioneer products Please contact the authorized Pioneer dealer from which you purchased this unit or an authorized Pioneer service company for aftersales service or questions you may have about the product. You may contact Pioneer directly as follows:
Do not ship your unit in for repair without contacting Pioneer first. Units sent without a return authorization number will be refused. USA & CANADA Pioneer Electronics (USA) Inc. CUSTOMER SUPPORT DIVISION P.O. Box 1760 Long Beach, CA 90801-1760 U.S.A. 800-421-1404 For warranty information, please see the Limited Warranty sheet included with this unit. Visit our website U.S.:
https://www.pioneerelectronics.com Canada:
https://www.pioneerelectronics.ca Learn about product updates (such as firmware updates) for your product. Register your product. Access owners manuals, spare parts information, service information, and much more. Safety Precautions Certain country, state and provincial laws may prohibit or restrict the placement and use of this product in your vehicle. Please comply with all applicable laws and regulations regarding the use, installation and operation of this product. It is the users responsibility to comply with all applicable laws, rules, regulations and ordinances. WARNING Do not install this product in your vehicle if its location or use would obstruct the drivers clear view of the road or the operation of any vehicle airbag. It is also the drivers responsibility to know and comply with the laws, rules, and regulations of the driving location, including, for example, passenger privacy rights, and not to use the device in any location where its installation or use is prohibited. WARNING Do not allow this product to come into contact with liquids. Electrical shock could result. Also, damage to the product, smoke, and overheating could result from contact with liquids. Before using this product, be sure to read and fully understand the following safety information:
Do not operate this product if doing so will divert your attention in any way from the safe operation of your vehicle. Always observe safe driving rules and follow all existing traffic regulations. If you experience difficulty in operating this product or reading the display, park your vehicle in a safe location and apply the parking brake before making the necessary adjustments. Certain functions (such as viewing of screen and certain button operations) offered by this product could be dangerous (possibly resulting in serious injury or death) and/or unlawful if used while driving. Screen display is disabled for this product while the vehicle is moving. Precautions before connecting the system WARNING Firmly install this product so it does not fall off the inside of the front windshield. If this product is not firmly installed, it may fall off the windshield while driving and cause an accident. Periodically inspect this product. Pioneer recommends that only authorized service company personnel, who have special training and 2021 PIONEER CORPORATION.
< KYTZ21B >< CYR1298-A >
CYR1298-A < 1 >
CYR1298-A < 2 >
CYR1298-A < 3 >
CYR1298-A < 4 >
English Part Names Top 1 4 5 Left side Front Right side Status Display The status display shows the operating status of this product. 1 2 3 54 6 7 8 00:00 1 Recording in progress 2 Elapsed recording time 3 Event recording status*1 4 Parking mode 5 Sound recording*2 6 Wi-Fi connection status*3 7 GPS reception status*4 8 Power status
: Battery mode
: Charging) 2 3 9 a b 6 8 d 7 c Back 2nd camera e
*1 When manual event recording is performed or vibration is detected in the event recording mode, and event recording has been activated, 2 is displayed.
*2 A red \ is displayed when sound recording is set to off.
*3 During a Wi-Fi connection, this is displayed in green, and when Wi-Fi is disconnected, this is displayed in white. A red x is displayed when Wi-Fi connection is set to off.
*4 During GPS reception, this is displayed in green, and when GPS cannot be received, this is displayed in white. In the 9 a b c parking mode, a red x is displayed since GPS reception is set to off.
* When the volume or sensitivity MENU screen is displayed, increase or decrease the volume or sensitivity. System Indicator Display The operating status of this product is displayed with the system indicator. Inserting and Ejecting the microSD Card Turn off the power to this product when inserting and removing the microSD card. f System Indicator Video Recording Recording Event Menu Displayed/
During Playback Illuminated green Illuminated red Blinking red Error Has Occurred
(Including microSD Card not Inserted) Inserting the microSD Card Hold the top edge of the microSD card, position the microSD card so that the label is facing the backside of this product, and slowly insert it into the microSD card slot until it clicks. Ejecting the microSD Card Slowly push in the top edge of the microSD card until it clicks (1). The lock will be released. Pull out the microSD card (2). 1 AV Output Terminal 2 Power Port Connect the power cable and AV cable. 3 2nd Camera Connection Terminal Connect to the 2nd camera connection terminal
(e) using the 2nd camera connection cable. 9 Speaker a Microphone b Reset Button 4 microSD Card Slot 5 System Indicator 6 LCD 7 Function Buttons 8 Lens Pioneer polarized filter AD-PLF100 (sold separately) can help reduce reflections of the dashboard onto the windshield, and enable the capture of high-contrast videos. Press this button with the tip of a ballpoint pen to reset this product. c Angle Adjustment Jog Dial The angle of the lens can be adjusted by turning this dial. d Mounting Bracket e Connection Terminal f Lens Function Buttons The functions of the function buttons are indicated by the icons displayed at the bottom of the screen. The functions of the buttons will depend on the displayed screen. (Icons are not displayed on some screens.) In the playback screen or MENU screen, pressing the function button returns you to the previous screen. Recording 1 Main menu display 2 Switching of camera video Hold down to switch Wi-Fi on/off 3 Manual recording of events Hold down to switch microphone on/off 4 Take photo 1 2 3 4 CAUTION Do not insert the microSD card at an angle. Doing so may cause damage. Main Unit1 2nd Camera1 Mounting Bracket1 Power Cable
(5 m/16 ft. 5 in.)1 Mini Pin Jack-RCA Conversion Cable
(0.2 m/7-7/8 in.)1 AV Cable
(5 m/16 ft. 5 in.)1 2nd Camera Connection Cable
(3 m/9 ft. 10 in.)1*
2nd Camera Connection Cable
(6 m/19 ft. 8 in.)1*
microSDHC Card
(16 GB)1 Quick Start Guide1 Warranty1 Cleaning Cloth1
* The 2nd camera connection cable is included already connected. During playback Dedicated App 5 6 7 8 During MENU screen display 5 Back 6 Next file 7 Previous file 8 Play/stop, delete 9 Back a Up*
Hold down to switch Wi-Fi on/off b Down*
Hold down to switch microphone on/off c Confirm The dedicated app Dash Camera Interface can be used to check the video recorded on this product or make settings on the screen of an iPhone or Android device. To use this app, a Wi-Fi connection must be made between this product and iPhone or Android device beforehand. 1 Set the Wi-Fi function of this product to on. 2 Operate the device to select this product as the Wi-Fi connection device. The SSID name (access point name) and password of this product can be checked in the Wi-Fi settings screen. Only one device can be connected to this product at any one time. When a second device is connected, the first device is disconnected. While a Wi-Fi connection is made, no operations can be performed on this product. If a function button is pressed while a Wi-Fi connection is made, a message will be displayed prompting you to break the Wi-Fi connection. If you select [Yes], the Wi-Fi connection will be disconnected, and operations on this product will be enabled. You can change the SSID name of this product by operating the dedicated app Dash Camera Interface. Note, however, when the SD card is formatted, the SSID name returns to its default setting. It is recommended to enter the search term Dash Camera Interface in the search field to search for the application. Dash Camera Interface Check the Accessories CYR1298-A < 5 >
CYR1298-A < 6 >
CYR1298-A < 7 >
CYR1298-A < 8 >
Recommended Installation Position on Rear Windshield When installing the 2nd camera on the inside of the rear window, installation in a vehicle and in a position that satisfies all of the following conditions is recommended. A position where the lens part of the 2nd camera is within mounting bracket. 2 Install this product
: Set the mounting bracket on this product.
: Peel off the double-sided tape release paper from the
: Install at the specified position of the front windshield. 4 Connect the power cable, 2nd camera connection cable and AV cable to this product 6 Connect the power cable and AV cable Connecting the Power Cable 7 Turn the vehicle engine on to display the 2nd camera connection cable recording screen Connecting the Power Cable English Installation Specified Installation Position on Front Windshield When installing this product the inside of the front windshield, install in a vehicle and in a position that satisfies all of the following conditions. A position where this entire product is within 20% of the top edge of the height of the front windshield (range within 20% of the actual length, excluding parts overlapping weatherstrips, mouldings, etc. and masked parts) or are in the shadow of the rear view mirror as viewed from the drivers seat. Note that 20% as described above is a rough estimate. Please install the product in accordance with your countrys laws and regulations. If allowed by applicable law in your location, install in a 7-inch/17.8 cm square in the lower corner of the windshield farthest from the driver, a 5-inch/12.7 cm square in the lower corner of the windshield nearest to the driver and outside of any airbag deployment zone, or in a 5-inch/12.7 cm square mounted to the center uppermost portion of the interior of the windshield. The ideal location is behind the rearview mirror out of the drivers view as shown below. A position where the lens part of this product is within the wiping range of the wiper. A position where the lens part of this product does not hang over the sunshade and black ceramic lines/black ceramic pattern. A position where this product faces in the horizontal direction to the front and side to side. A position where the power cable can be routed without unnecessary force. Installation Angle Forward Direction of Vehicle Allowable Installation Angle:
30 to 60 (With Lens Horizontal) Installation Direction Main Unit Horizontal Direction Main Unit Front Windshield
*Install this product in a location where it will not interfere with the drivers field of view,such as behind the rear view mirror. Front Windshield Within 20 % of Height Ground Main Unit Horizontal Direction Rear View Mirror Main Unit A Pillar A Pillar Range of Windshield Wipers Rear windshield the wiping range of the wiper. A position where the 2nd camera faces in the horizontal direction to the rear and side to side. A position where the lens part of the 2nd camera and the double-sided tape do not overlap the heating wires. A position where the 2nd camera connection cable can be routed without unnecessary force. Rear windshield Connection cable Heating wires 2nd camera Wiping range of the rear wiper 1 Clean the installation area of dirt and oils using the included cleaning cloth Front windshield 1 Front Windshield 2 2nd camera Power cable AV Cable 3 Firmly push this product. CAUTION Make sure that the surface of the front windshield is dry before applying the tape. Firmly push the area around the LCD. Next, remove this product from the mounting bracket, and directly press the mounting bracket against the tape. In this way, the product can be firmly installed on the windshield. Never touch the surface of the LCD. Use extreme care as the double-sided tape on the mounting bracket is extremely strong, and it will be difficult to reapply the tape once it has been applied. To ensure the installation strength of the adhesive tape, leave this product for 24 hours after application before using it. 3 Install the 2nd camera
: Peel off the double-sided tape release paper from the 2nd camera.
: With the flat part shown in the figure facing up (position where the mark on the side is facing up), install the 2nd camera at the specified position on the rear windshield. 1 2 Install with the flat surface facing upwards. Main Unit Note Connecting the AV cable is only required if connecting the VREC-DZ700DC to a compatible stereo with an AV Input. 5 Route the power cable, 2nd camera connection cable and AV cable to the passenger seat side Connection cable Main Unit 2nd camera 8 Adjust the angle of the lens so that video outside and inside the vehicle is properly displayed Turn this part to adjust the lens angle. Turn the angle adjustment jog dial to adjust the lens angle. Before driving, turn the lens of this product towards the outside of the vehicle. This product restarts when the lens angle is moved from the outside of the vehicle to the inside, and vice versa. To switch between camera video from this product and video from the 2nd camera, press the button. Function Buttons Note A protective film is applied to the lens when the product is purchased. Peel off this film. Be sure to disconnect the terminal of the vehicles battery before connecting the power cable. The product should be installed by authorized service company personnel who have special training and experience with mobile electronics products. The parking mode (security mode allowing 24-hour, 365-day surveillance) can be used by extracting power directly from the vehicle by the power cable. You can also connect the product to a head unit by using an AV cable and audio output mini pin jack-RCA conversion cable so that you can check video footage and/or the camera view using the head unit screen.*
*Do not connect the product via AV cable unless the head unit displays video input only while the vehicle is parked. Black 0.5 m/1 ft. 8 in. Yellow 0.5 m/1 ft. 8 in. Fuse
(F 2 AL/250 V) Red 0.5 m/1 ft. 8 in. Fuse
(F 2 AL/250 V) 4.5 m/
14 ft. 9 in. Wiring specification of this product Audio is recorded in monaural sound. Audio (L) Audio (R) Ground Video Black 5 m/16 ft. 5 in. 0.2 m/
7-7/8 in. Yellow Video White Audio (L) Red Audio (R) Ground (Black) Securely connect to the metal part of the vehicle body. To prevent noise, connect as close to the navigation unit as possible.
+ Battery power supply (Yellow) Always connect to the power circuit supplied with power from the battery, regardless of whether the vehicle engine switch is ON or OFF. Accessory power supply (Red) Connect to the power circuit supplied with power when the vehicle engine switch is turned to the ACC position. Never install the accessory power supply to a vehicle that does not have an ACC position on the engine switch. Doing so may lead to a dead battery. Note: Connect the red and yellow lead wires to the terminals after wiring through the vehicles fuse unit. Video/audio output mini pin jack Connect to the AUX input of the main unit of a Pioneer product with a mini jack terminal compatible with video input. Connection to main units of other brands with RCA input terminals is also possible by using the included mini pin jack-RCA conversion cable (figure below).
*After connecting, the following message is displayed:
Is the 3.5mm Audio/Video Jack Connected? Select Yes or No. Connection Precautions To prevent fuming and damage to the product, be sure to first securely connect the black lead wire (Ground) of this product to the metal part of the vehicle body. Connect separate black lead wires (Ground) for products with a high current consumption such as a power amplifier. When setting up connections all at once, there is a risk of fuming or damage to the product when screws loosen or come off completely.
*1 Black lead wire (Ground) Metal part of the vehicle body
*1 Not supplied for this unit IMPORTANT Always install this product in the specified installation position to ensure a safe field of view while driving and to achieve full performance from the product. Face the lens towards the outside of the car and firmly push. AirBag CYR1298-A < 9 >
CYR1298-A < 10 >
CYR1298-A < 11 >
CYR1298-A < 12 >
Consignes de scurit Certaines lois nationales, tatiques et provinciales peuvent interdire ou restreindre le placement et lutilisation de cet appareil dans votre vhicule. Veuillez vous conformer toutes les lois et rglementations applicables concernant lutilisation, linstallation et le fonctionnement de cet appareil. Il incombe lutilisateur de se conformer toutes les lois, rgles, rglementations et ordonnances applicables. AVERTISSEMENT Ninstallez pas lappareil dans votre vhicule si son emplacement ou son utilisation obstrue la vue du conducteur sur la route ou le fonctionnement des coussins gonflables du vhicule. Le conducteur doit galement sassurer de connatre et respecter les lois, rgles et rglementations du lieu o il conduit, ce qui inclut, par exemple, le droit de confidentialit des passagers et linterdiction dutiliser lappareil l o son installation ou son utilisation est interdite. AVERTISSEMENT Ne laissez pas cet appareil entrer en contact avec des liquides. Ceci pourrait causer une lectrocution. En outre, le contact avec des liquides peut entraner des dommages, de la fume et une surchauffe de cet appareil. Avant dutiliser cet appareil, veuillez lire les consignes de scurit suivantes de manire bien les comprendre :
Nutilisez pas lappareil si son utilisation vous empche, de quelque manire que ce soit, de conduire votre vhicule en toute scurit. Conduisez toujours prudemment et respectez le code de la route existant. Si vous rencontrez des difficults lors de lutilisation de lappareil ou de la lecture de lcran, garez votre vhicule en lieu sr et serrez le frein main avant de procder aux rglages ncessaires. Certaines fonctions (telles que laffichage de lcran et certaines oprations sur les boutons) offertes par cet appareil peuvent tre dangereuses (pouvant entraner des blessures graves ou un dcs) et/ou illgales si elles sont utilises pendant la conduite. Laffichage lcran est dsactiv pour cet appareil lorsque le vhicule est en mouvement. Franais Informations de l'utilisateur Lmetteur/rcepteur exempt de licence con-
tenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppe-
ment conomique Canada applicables aux ap-
pareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) Lappareil ne doit pas produire de brouillage;
(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d en compromettre le fonctionne-
ment. Cet quipement est conforme aux limites dex-
position IC dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et la carrosserie. Service aprs-vente des appareils Pioneer Veuillez contacter le revendeur Pioneer agr auprs duquel vous avez achet cette unit ou une socit de service aprs-vente Pioneer agre ou les questions que vous pourriez avoir sur lappareil. Vous pouvez contacter Pioneer directement comme suit :
Nexpdiez pas votre appareil pour rparation sans avoir dabord contact Pioneer. Les appareils envoys sans numro dautorisation de retour seront refuss. TATS-UNIS ET CANADA Pioneer Electronics (tats-Unis) Inc. CUSTOMER SUPPORT DIVISION P.O. Box 1760 Long Beach, CA 90801-1760 tats-Unis 800-421-1404 Pour obtenir plus dinformations sur la garantie, veuillez consulter la feuille de garantie limite inclus avec cette unit. Consultez notre site Web tats-Unis :
https://www.pioneerelectronics.com Canada :
https://www.pioneerelectronics.ca Dcouvrez les mises jour de lappareil (telles que les mises jour du micrologiciel) pour votre appareil. Enregistrez votre appareil. Accdez modes demploi, aux informations sur les pices de rechange, aux informations de service et bien plus encore. Prcautions prendre avant de relier le systme Prcautions prendre avant linstallation Nom des pices AVERTISSEMENT Installez fermement cet appareil afin quil ne tombe pas du pare-brise. Si cet appareil nest pas fermement install, il peut tomber du pare-brise pendant la conduite et provoquer un accident. Inspectez priodiquement cet appareil. Pioneer recommande que seul le personnel autoris de la socit de service, possdant une formation et une exprience spcialises en lectronique automobile, configure et installe cet appareil. Attachez tous les fils avec des collets ou des serre-
cbles. Ne laissez aucun fil nu. AVERTISSEMENT Ninstallez pas cet appareil dans un endroit o il risque
(i) dentraver la visibilit du conducteur,
(ii) daltrer le fonctionnement de certains systmes de commande ou de dispositifs de scurit du vhicule, y compris les coussins gonflables ou les touches de feux de dtresse ou
(iii) dempcher le conducteur de conduire le vhicule en toute scurit. Ninstallez jamais cet appareil devant ou ct dun endroit sur le tableau de bord, une portire ou un pilier, partir duquel un des coussins gonflables du vhicule pourraient se dployer. Veuillez vous reporter au mode demploi du vhicule pour en savoir plus sur les zones de dploiement des coussins gonflables frontaux. ATTENTION Pour garantir une installation correcte, assurez-vous dutiliser les pices incluses de la faon spcifie. Si certaines pices ne sont pas incluses avec cet appareil, utilisez des pices compatibles de la faon spcifie aprs en avoir fait vrifier la compatibilit par votre revendeur. Si dautres pices que les pices incluses ou compatibles sont utilises, elles peuvent endommager les pices internes de cet appareil ou tre inappropri, et lappareil peut se dtacher. Ninstallez pas cet appareil dans un endroit soumis des tempratures leves ou lhumidit. Par exemple :
proximit du chauffage, de la ventilation ou de la climatisation. des endroits susceptibles dtre exposs la pluie, comme prs de la porte.. Ct gauche Avant Ct droit Haut 1 4 5 Affichage de ltat Laffichage de ltat indique le fonctionnement de lappareil. 1 2 3 54 6 7 8 00:00 1 Tmoin denregistrement 2 Affichage du temps denregistrement coul 3 Affichage du statut denregistrement dvnements*1 4 Affichage du mode stationnement 5 Affichage denregistrement audio*2 6 Affichage du statut de connexion Wi-Fi*3 7 Affichage du statut de rception GPS*4 8 Affichage de ltat de lalimentation
: Mode de batterie
: Recharge)
7 c option est dsactive. Arrire 2e camra e
*1 2 saffiche si un enregistrement dvnement manuel est effectu pendant lenregistrement dvnements ou si des vibrations ont t dtectes et que lenregistrement dvnements a t lanc.
*2 Un \ rouge saffiche si cette option est dsactive.
*3 Saffiche en vert pendant la connexion, et en blanc quand il ny a pas de connexion. Un rouge saffiche si cette
*4 Saffiche en vert pendant la rception, et en blanc lorsque la rception nest pas possible. Un rouge saffiche en mode stationnement, puisque cette fonction est dsactive. Affichage du tmoin du systme Ltat de lappareil est confirm par le tmoin du systme. f Tmoin du systme Allum en vert Allum en rouge Clignote en rouge Pendant laffichage du menu /
Pendant la lecture Pendant lenregistrement vido Pendant lenregistrement dvnements Lors dune erreur
(y compris carte microSD absente) 2 3 9 a b 6 8 d 1 Borne de sortie AV 2 Brone dalimentation Branchez le cble dalimentation / AV. 3 Borne de connexion de 2e camra Branchez le cble de connexion de 2e camra la borne de connexion de 2e camra (e). 4 Emplacement pour carte microSD 5 Tmoin du systme 6 cran LCD 7 Touches de fonctions 8 Objectif Le filtre polaris AD-PLF100 de Pioneer (vendu sparment) peut rduire les reflets du tableau de bord sur le pare-brise et permettre la capture de vidos contraste lev. 9 Haut-parleur a Microphone b Touche de rinitialisation Appuyez sur cette touche avec la pointe dun stylo bille pour rinitialiser lappareil. c Molette de rglage dangle En le tournant, vous pouvez rgler langle de lobjectif. d Support de montage e Borne de connexion f Objectif Touches de fonctions Les fonctions des touches de fonctions sont indiques par les icnes affiches au bas de lcran. Les fonctions varient selon lcran affich. (Sur certains crans, les icnes ne saffichent pas.) Dans lcran de lecture ou lcran MENU, appuyez sur le bouton de fonction pour revenir lcran prcdent. Pendant lenregistrement 1 Affichage du menu principal 2 Permutation de limage de camra Appuyez longuement pour activer/dsactiver le Wi-Fi. 3 Enregistrement dvnement manuel Appuyez longuement pour activer/dsactiver le microphone. 4 Prise de photos 1 2 3 4 CYR1298-A < 13 >
CYR1298-A < 14 >
CYR1298-A < 15 >
CYR1298-A < 16 >
Franais Pendant la lecture 5 6 7 8 Pendant laffichage de lcran MENU 5 Retour 6 Fichier suivant 7 Fichier prcdent 8 Lecture/arrt, supprimer 9 Retour a Vers le haut*
Maintenir enfonc pour activer/dsactiver le Wi-Fi b Vers le bas*
Maintenir enfonc pour activer/dsactiver le microphone c Confirmation
* Lorsque lcran MENU du volume ou de la sensibilit est affich, cette touche augmente/rduit le volume ou la 9 a b c sensibilit. Insertion et jection de la carte microSD Dsactivez lappareil avant linsertion ou le retrait de la carte microSD. Insertion de la carte microSD Maintenez le bord suprieur de la carte microSD, positionnez la carte microSD de manire ce que ltiquette soit oriente vers larrire de lappareil et insrez doucement la carte dans lemplacement pour carte microSD jusquau dclic du verrou. jection de la carte microSD Enfoncez doucement le bord suprieur de la carte microSD jusquau dverrouillage (1). Retirez la carte microSD (2). ATTENTION Ninsrez pas la carte microSD de faon incline. Ceci pourrait endommager lappareil. ATTENTION Le fait de retirer immdiatement votre doigt aprs le dverrouillage de la carte microSD peut faire voler celle-ci. Emplacement recommand pour linstallation sur la vitre arrire Lors de linstallation de la 2e camra lintrieur de la vitre arrire, linstallation dans un vhicule et dans un emplacement qui remplit toutes les conditions suivantes est recommande. Un emplacement o lobjectif de la 2e camra se 2 Installez lappareil
: Rglez le support de montage sur cet appareil.
: Dcollez le papier protecteur du ruban antiadhsif double face du support de montage.
:Fixez-le la position dinstallation indique sur le Application ddie Installation Lapplication ddie Dash Camera Interface peut tre utilise pour vrifier la vido enregistre sur cet appareil ou effectuer des rglages sur lcran dun iPhone ou dun appareil Android. Pour utiliser cette application, une connexion Wi-Fi doit tre tablie au pralable entre cet appareil et un iPhone ou un appareil Android. 1 Activez la fonction Wi-Fi sur lappareil. 2 Utilisez lappareil pour slectionner ce dernier comme priphrique de connexion Wi-Fi. Il est possible de vrifier le nom SSID (nom de point daccs) de lappareil et le mot de passe sur lcran de rglages Wi-Fi. Un seul appareil peut tre connect cet appareil la fois. Lorsquun deuxime appareil est connect, le premier appareil sera dconnect. Pendant la connexion Wi-Fi, il est impossible deffectuer des commandes sur lappareil. Si vous effectuez des commandes sur les touches de fonctions pendant la connexion Wi-Fi, un message vous invitant couper la connexion Wi-Fi saffichera. En slectionnant [ Oui ], vous couperez la connexion Wi-Fi et vous pourrez effectuer des commandes sur lappareil. Il est possible de modifier le nom de SSID de lappareil au moyen de lapplication ddie Dash Camera Interface . Toutefois, le nom de SSID reviendra au rglage dusine si vous formatez la carte SD. Il est recommand dentrer le terme de recherche Dash Camera Interface dans le champ de recherche pour chercher lapplication. Dash Camera Interface Vrifi cation des accessoires Position dinstallation indique sur le pare-brise Lors de linstallation de cet appareil lintrieur du pare-brise avant, installez-le dans un vhicule et un emplacement remplissant toutes les conditions ci dessous. Un emplacement o lensemble de cet appareil se trouve moins de 20 % du bord suprieur de la hauteur du pare-
brise avant (plage moins de 20 % de la longueur relle, lexclusion des pices chevauchant des coupe-froid, des moulures, etc., et des pices masques) ou lombre du rtroviseur vu depuis le sige conducteur. Notez que 20 % , comme dcrit ci-dessus, est une estimation approximative. Veuillez installer lappareil conformment aux lois et rglementations de votre pays. Si la loi en vigueur dans votre rgion lautorise, installez dans un carr de 7 pouces/17,8 cm dans le coin infrieur du pare-brise le plus loign du conducteur, un carr de 5 pouces/12,7 cm dans le coin infrieur du pare-brise le plus proche du conducteur et lextrieur de toute zone de dploiement de coussins gonflables, ou dans un carr de 5 pouces/12,7 cm mont sur la partie centrale la plus haute de lintrieur du pare-brise. Lemplacement idal est derrire le rtroviseur hors de la vue du conducteur, comme illustr ci-dessous. Un emplacement o lobjectif de la camra embarque se trouve dans la porte des essuie-glaces. Un emplacement o la partie de lobjectif de cet appareil ne dpasse pas le pare-soleil et les lignes en cramique noire/le motif en cramique noire. Un emplacement o la camra embarque est oriente vers lavant et les cts en position horizontale. Un emplacement o le cble dalimentation peut tre achemin sans force inutile. Angle dinstallation FAvant du vhicule Angle dinstallation possible : 30 60 (avec objectif lhorizontale) Unit principale Pare-brise Sens dinstallation Sens horizontal Unit principale trouve dans la porte des essuie-glaces Un emplacement o la 2e camra est oriente vers larrire et les cts en position horizontale Un emplacement o lobjectif de la 2e camra et le ruban adhsif double fae ne chevauchent pas les fils thermiques. Un emplacement o le cble de connexion de la 2e camra peut facilement atteindre la prise Vitre arrire Cble de connexion Fils thermiques 2e camra Porte de lessuie-glace arrire 1 Utilisez le chiffon de nettoyage fourni pour retirer la salet et lhuile de la zone dinstallation Sol Pare-brise Unit principale Sens horizontal Unit principale1 2e camra1 Support de montage1 Cble dalimentation (5 m) 1 Cble de conversion miniprise-RCA (0,2 m) 1
*Installez lappareil un emplacement o il ninterfrera pas avec le champ de vision du conducteur (derrire le rtroviseur, par exemple). Pare-brise 20 % de la hauteur Cble AV
(5 m) 1 Cble de connexion pour 2e camra
(3 m) 1*
Cble de connexion pour 2e camra
(6 m) 1*
Carte microSDHC
(16 Go) 1 Montant A Rtroviseur Unit principale Porte des essuie-glaces Montant A Vitre arrire pare-brise. 1 Pare-brise 2 3 Appuyez fermement sur cet appareil. ATTENTION Ne le collez quune fois le pare-brise bien sec. Poussez fermement la zone autour de lcran LCD. Ensuite, retirez cet appareil du support de montage et appuyez directement le support de montage contre le ruban. De cette faon, lappareil peut tre fermement install sur le pare-brise. Nappuyez jamais sur la surface de lcran LCD. Soyez extrmement prudent, car le ruban adhsif double face sur le support de montage est extrmement rsistant et il sera difficile de dplacer lappareil une fois le ruban coll. Afin dassurer toute la puissance dadhsion du ruban adhsif double face, nutilisez le support dinstallation quau moins 24 heures aprs lavoir fix. 3 Installez la 2e camra
: Retirez le film protecteur du ruban adhsif double de sur la 2e camra.
: Avec la partie plate illustre sur la figure oriente vers le haut (position o le repre sur le ct est orient vers le haut), installez la 2e camra la position spcifie sur le pare-brise arrire. 1 2 Installez avec la surface plane oriente vers le haut. Guide de dmarrage rapide1 Document de garantie 1 Chiffon de nettoyage 1
* Le cble de connexion pour 2e camra (inclus) est dj connect. Coussin gonflable IMPORTANT Installez toujours lappareil lemplacement dinstallation indiqu pour garantir une vue sre lors de la conduite et pour bnficier de performances optimales de lappareil. Orientez lobjectif vers lintrieur du vhicule et appuyez fermement. CYR1298-A < 17 >
CYR1298-A < 18 >
CYR1298-A < 19 >
CYR1298-A < 20 >
Franais 4 Branchez le cble dalimentation, le cble de connexion de la 2e camra et le cble AV la camra embarque 6 Branchez le cble dalimentation et le cble AV Raccordement du cble dalimentation Cble de connexion de 2e camra 7 Dmarrez le moteur du vhicule et activez lcran denregistrement 8 Rglez langle de lobjectif pour que limage de lintrieur ou de lextrieur du vhicule saffiche correctement Tournez cette pice pour ajuster langle de lobjectif. Tournez langle de la manette de rglage dangle pour ajuster langle de lobjectif. Avant de conduire, tournez lobjectif de cet appareil vers lextrieur du vhicule. lappareil sactive lorsque vous dplacez langle de lobjectif de lextrieur vers lintrieur du vhicule ou vice-versa. Pour basculer entre la vido de la camra de cet appareil et la vido de la 2e camra, appuyez sur le
. Touches de fonctions bouton Remarque Un film protecteur est appliqu sur lobjectif lors de lemballage du produit. Veuillez retirer le film. 2e camra Cble dalimentation Cble AV Unit principale Remarques La connexion du cble AV nest ncessaire que si vous connectez la VREC-DZ700DC un appareil AV compatible et quip dune entre AV. 5 Installez le cble dalimentation, le cble de connexion de la 2e camra et le cble AV sur le ct du sige passager Cble de connexion Unit principale 2e camra Raccordement du cble dalimentation Raccordez toujours le cble dalimentation aprs avoir dconnect la borne de la batterie du vhicule. Lappareil doit tre install par le personnel de la socit de service autoris qui a une formation et une exprience spcifiques avec les appareils lectroniques automobiles. En alimentant lappareil directement depuis le vhicule laide du cble dalimentation, vous pouvez utiliser le mode stationnement
(mode de scurit permettant une surveillance 24h/24, 365 jours par anne). Vous pouvez galement connecter lappareil une unit principale laide dun cble AV et dun cble de conversion mini-jack RCA de sortie audio afin de pouvoir vrifier les squences vido et/ou la vue de la camra laide de lcran de lunit principale.*
*Ne connectez pas lappareil via un cble AV moins que lunit principale naffiche lentre vido uniquement lorsque le vhicule est stationn. Noir 0,5 m Jaune 0,5 m Fusible
(F 2 AL/250 V) Rouge 0,5 m Fusible
(F 2 AL/250 V) 4,5 m Spcifications de cblage de lappareil Laudio est enregistr en mode mono. Audio (G) Audio (D) Masse Vido Noir 5 m 0,2 m Jaune Vido Blanc Audio (G) Rouge Audio (D) Masse Fixez fermement la partie mtallique de la carrosserie du vhicule. Pour viter le bruit, connectez le plus prs possible de la camra embarque. Alimentation de batterie +
Connectez toujours au circuit dalimentation qui est aliment par la batterie, peu importe que le commutateur de dmarrage du moteur du vhicule soit sur ON ou OFF. Alimentation daccessoire Connectez au circuit dalimentation qui est aliment lorsque le commutateur de dmarrage du moteur du vhicule est sur la position ACC. Ne connectez jamais lalimentation daccessoire sur un vhicule qui na pas de position ACC sur le commutateur de dmarrage du moteur. Cela peut entraner lpuisement de la batterie. Remarque : Connectez les fils conducteurs rouge et jaune aux bornes aprs les avoir fait passer par un circuit protg par une fusible. Mini-prise de sortie vido/audio Connectez-la lentre AUX de lunit principale dun appareil Pioneer quip dune borne de mini-prise compatible avec lentre vido. La connexion des units principales dautres marques quipes de bornes dentre RCA est galement possible en utilisant un cble de conversion mini-prise/RCA (figure ci-dessous).
*Aprs la connexion, le message suivant saffiche : La prise audio/vido 3,5 mm est-elle relie? Slectionnez Oui ou Non . Prcautions de connexion Pour la formation de fumes et lendommagement de lappareil, assurez-vous dabord de connecter fermement le fil de terre noir (Masse) de cet appareil une partie mtallique de la carrosserie du vhicule. Pour les appareils forte consommation de courant, tels quun amplificateur de puissance, connectez les fils conducteurs noirs spars (Masse). Lors de la mise en place de connexions simultanes, il y a un risque de formation de fumes ou dendommagement de lappareil si les vis se desserrent ou se dtachent compltement.
*1 Fil conducteur noir (Masse) Partie mtallique de la carrosserie du vhicule
*1 Non fourni avec cet appareil CYR1298-A < 21 >
CYR1298-A < 22 >
CYR1298-A < 23 >
CYR1298-A < 24 >
1 | Agent Authorization Rev 1.0 | Cover Letter(s) | 23.44 KiB | March 15 2021 |
Pioneer China Holding CO., Ltd. 5F, NO.668 ShenChang Road, Minhang District Shanghai, 201106, China Agent Authorization Company: Pioneer China Holding CO., Ltd. Address: 5F, NO.668 ShenChang Road, Minhang District Shanghai, 201106, China Product Name: DASH CAMERA Model Number(s): VREC-DZ700DC Product Description: Wi-Fi DASH CAMERA We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:
Date: Jan. 05, 2021 Name:
Xianghua Gan Title:
General Manager Company: Pioneer China Holding CO., Ltd.
1 | FCC Short & Long Term Confidentiality | Cover Letter(s) | 302.81 KiB | March 15 2021 |
Pioneer China Holding CO., Ltd. 5F, NO.668 ShenChang Road, Minhang District Shanghai, 201106, China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jan. 05, 2021 Subject; Request for Confidentiality FCC ID: 2ATRT-VREC To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. XX] Schematic Diagram XX] Block Diagram Operational Description Parts List
[_] Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);
{J External Photos
[_] Test Setup Photos
[_] Internal Photos
(_] User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR _] For 180 days pursuant to KDB 726920 DO1. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, L0 Signature: io insu Dal t Name: Xianghua Gan Title: General Manager
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2021-03-15 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2021-03-15
|
||||
1 | Applicant's complete, legal business name |
Pioneer China Holding CO., Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0028598381
|
||||
1 | Physical Address |
5F, NO.668 ShenChang Road, Minhang District
|
||||
1 |
Shanghai, N/A
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@micomlabs.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2ATRT
|
||||
1 | Equipment Product Code |
VREC
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
X**** G****
|
||||
1 | Telephone Number |
+86-1********
|
||||
1 | Fax Number |
N/A********
|
||||
1 |
x******@intl.pioneer.co.jp
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Pioneer China Holding CO., Ltd.
|
||||
1 | Physical Address |
China
|
||||
1 |
x******@intl.pioneer.co.jp
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wi-Fi DASH CAMERA | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Attestation of Global Compliance (Shenzhen) Co., L
|
||||
1 | Name |
D**** L********
|
||||
1 | Telephone Number |
+86-7********
|
||||
1 |
d******@agc-cert.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.0424000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC