all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 2.97 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos | |||||||
1 | Cover Letter(s) | |||||||
1 | ID Label/Location Info |
1 | Users Manual | Users Manual | 2.97 MiB |
SE-CL5BT ClipWear Active Wireless Earphones ClipWear Active Wireless Earphones ClipWear Active Wireless Earphones ClipWear Active Wireless Earphones ClipWear Active Wireless Earphones ClipWear Active Wireless Earphones ClipWear Active Wireless Earphones ClipWear Active Wireless Earphones 1. Set Contents///
1 2 3
-
S E C L 5 B T 2. Names of Parts///
-
S E C L 5 B T 6 2 1 3 3. Replacing the earphone tip///
7 5 4 Before you start This document describes the information and operations required for startup. For more advanced operation procedures, read the instruction manual which is available on the website.
<Europe>
http://www.pioneer-audiovisual.eu/
<U.S.A.>
www.PioneerElectronics.com/Home
<Canada>
www.PioneerElectronics.ca/Home 1. Set Contents Confirm the presence of all parts and componets before use. 1: Earphone 2: Micro-USB cable 3: S, M, L eartips 4: Warranty card (Europe / U.S.A. and Canada / Japan) 5: Quick Start Guide (this document) 6: Safety Guide 2. Names of Parts (see Fig.2) 1: Main Function Button 2: Volume Up Button 3: Volume Down Button 4: LED Indicator 5: Micro-USB Port 6: Microphone 7: Clipper 3. Replacing the earphone tip (see Fig.3)
(1) Installation Press the mounting surface firmly onto the nozzle.Failure to press the tip fully onto the nozzle may cause the tip to come off.
(2) Removal Hold the earphone body securely and twist off the earphone tip. 4. Wearing the clipper how you like it The clipper is designed as a clothing clip. This gives you a variety of simple and practical wearing styles: Just clip it on your shirt, jacket, t-shirt or whatever that fits your needs. Just clip it on the necklineas shown in figure 4), collar edge, or wherever that fits your needs. 5. Charging the batteries The units battery must be recharged before use. The accessory micro-USB cable must be used for recharging the units battery. Connect the appropriate connector on the accessory micro-USB cable to the micro-
USB port on the earphones, and the USB plug on the other end to a USB port on a computer (see Fig.5). When recharging begins, the LED indicator on the earphone will light red. Full recharging requires about 2 hours, when recharging is completed, the LED indication will turn blue. Note Battery recharging time and usable battery time may vary depending on ambient temperature and frequency of use. Notes on battery charging Battery performance is influenced by surrounding temperature. Charge the supplied rechargeable batteries within a temperature range 10 to 35 degrees celcius. Batteries become slightly warm when charging. This is not a malfunction. Recharging may not be possible if computer is in power-saving mode. The unit cannot be used during charging. 6. Pairing Pairing must be performed before the earphones can be used to listen the music or communicate using a Bluetooth device. For further details regarding the pairing procedure, consult the users manual for your Bluetooth device.
(1) While the power of the unit is off, press and hold the Main Function Button until the unit enters paring mode. The paring mode is confirmed by LED indicators alternatively flashing blue and red. Release the Main Function Button after confirming that the LED indicator is alternately lighting blue and red.
(2) Turn on the power to the Bluetooth device you are going to pair with, and begin pairing; search for this unit (wireless earphones) from the paired Bluetooth device. Set Bluetooth device close (within one meter) to the wireless earphones. These wireless earphones will appear in the Bluetooth devices display as Pioneer SE-CL5BT.
(3) Conrm that pairing has been successfully completed with the Bluetooth device. Look at the display for the Bluetooth-enabled device and select Pioneer SE-CL5BT. When the LED is flashing in blue slowly about once every 3 seconds, pairing is completed. The PIN code for these wireless earphones has been factory set as 0000. Input this code if requested by the Bluetooth device. Connect to the Bluetooth device Confirm that the power to the wireless earphones is ON before connecting to the Bluetooth device. Depending on the device, connection between the wireless earphones and Bluetooth device may be effected automatically after pairing. Disconnecting from the Bluetooth device Press and hold the Main Function Button until the LED turns off and the power of the device turns off. 7. Enjoying Music To use the wireless earphones to listen to music from a Bluetooth device, you must first perform pairing with the Bluetooth device using the A2DP audio profile. For details on how to perform pairing, see < 5.Pairing >.
(1) With power to the wireless earphones turned off, hold the MFB depressed for about three seconds. The earphones power will turn on and the LED indicator will flash blue.
(2) Turn on the Bluetooth function on the device you wish to connect to. When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.
*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection. Controls when listening to music If the connected Bluetooth device supports AVFCP, the following operations can be used.
() button Press once: increase volume Press and hold: advance to next track or chapter
() button Press once: decrease volume Press and hold: advance to previous track or chapter Main Function Button Press once: Play / Pause
*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the headphones.
*Sound volume can be adjusted on the matching Bluetooth device.
*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.
*Depending on the specifications of the connected Bluetooth device, the music playback settings may need to be configured. Consult the users manual for the Bluetooth device.
*Depending on the specifications of the connected Bluetooth device, a music playback application may start automatically or the music cannot be paused/played. Consult the users manual for the Bluetooth device. 8. Vocal communication To use the wireless earphones for vocal communication, pairing must be performed with the desired Bluetooth device using the hands-free profile (HFP) or headset profile (HSP). For details on how to perform pairing, see < 5.Pairing >.
*If the Bluetooth device supports both profiles HFP & HSP, use the profile HFP.
(1) With power to the wireless earphones turned off, hold the Main Function Button depressed for about 3 seconds. The earphones power will turn on and the LED indicator will flash blue.
(2) Turn on the Bluetooth function on the device you wish to connect to. When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.
*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection. Vocal communication controls If the connected Bluetooth device supports AVRCP, the following operations can be used.
() button Press and hold: Increase volume
() button Press and hold: Decrease volume Main Function Button Press once when receiving a call: Enable conversation.Press once again to end conversation. Press and hold when receiving a call: Refuse communication The same controls are supported in the event a call is received while listening to music.
*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the earphones.
*Sound volume can be adjusted on the matching Bluetooth device.
*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.
*Depending on the specifications of the connected Bluetooth device, the phone settings may need to be configured. Consult the users manual of the Bluetooth device. Specication Basic Transmission format.....................................Bluetooth Standard Protocol Ver. 4.1 Maximum transmission distance...................................About 10m line of sight *1 Frequency used...........................................4GHz (2.400 GHz to 2.4835 GHz)*2 Supported Bluetooth profiles...............................................A2DP, AVRCP, HFP, HSP Supported CODEC...................................................................................SBC Battery life with continuous use........Maximum 8 hours of continuous transmission
(including music-play time) Recharging time.........................................................................About 2 hours Battery.................................. DC3.7V internally rechargeable Lithium-ion battery IPX level................................................................................................IPX-4 Weight.....................................................................................................21g Headphone Type............................................................Fully-enclosed dynamic earphones Driver units........................................................................................9.2mm Impedance..........................................................................................16 ohm Frequency response............................................................20 Hz ~ 20 000 Hz Sensitivity..............................................................................................95 dB Accessories S, M, L eartips..........................................................................................1pc Micro-USB cable (50cm)............................................................................1pc Warranty card(Europe / U.S.A. and Canada / Japan).....................................1pc Quick Start Guide (this document)...............................................................1pc Safety Guide.............................................................................................1pc
*1 Transmission distance is an approximation. Actual usable distance may vary depending on surrounding conditions.
*2 This product utilizes radio wave in the 2.4 GHz spectrum. Some signal dropouts may be experienced due to interference with radios, microwave ovens, and other devices using 2.4 GHz spectrum. Note Specifications and design are subject to possible modifications without notice due to improvements. About License and Trademarks Pioneer is a trademark of Pioneer Corporation, and is used under license. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Onkyo Corporation is under license. Other trademarks and trade name are those of their respective owners. Android is a trademark of Google Inc Before you start This document describes the information and operations required for startup. For more advanced operation procedures, read the instruction manual which is available on the website.
<Europe>
http://www.pioneer-audiovisual.eu/
<U.S.A.>
www.PioneerElectronics.com/Home
<Canada>
www.PioneerElectronics.ca/Home 1. Set Contents Confirm the presence of all parts and componets before use. 1: Earphone 2: Micro-USB cable 3: S, M, L eartips 4: Warranty card (Europe / U.S.A. and Canada / Japan) 5: Quick Start Guide (this document) 6: Safety Guide 2. Names of Parts (see Fig.2) 1: Main Function Button 2: Volume Up Button 3: Volume Down Button 4: LED Indicator 5: Micro-USB Port 6: Microphone 7: Clipper 3. Replacing the earphone tip (see Fig.3)
(1) Installation Press the mounting surface firmly onto the nozzle.Failure to press the tip fully onto the nozzle may cause the tip to come off.
(2) Removal Hold the earphone body securely and twist off the earphone tip. 4. Wearing the clipper how you like it The clipper is designed as a clothing clip. This gives you a variety of simple and practical wearing styles: Just clip it on your shirt, jacket, t-shirt or whatever that fits your needs. Just clip it on the necklineas shown in figure 4), collar edge, or wherever that fits your needs. 5. Charging the batteries The units battery must be recharged before use. The accessory micro-USB cable must be used for recharging the units battery. Connect the appropriate connector on the accessory micro-USB cable to the micro-
USB port on the earphones, and the USB plug on the other end to a USB port on a computer (see Fig.5). When recharging begins, the LED indicator on the earphone will light red. Full recharging requires about 2 hours, when recharging is completed, the LED indication will turn blue. Note Battery recharging time and usable battery time may vary depending on ambient temperature and frequency of use. Notes on battery charging Battery performance is influenced by surrounding temperature. Charge the supplied rechargeable batteries within a temperature range 10 to 35 degrees celcius. Batteries become slightly warm when charging. This is not a malfunction. Recharging may not be possible if computer is in power-saving mode. The unit cannot be used during charging. 6. Pairing Pairing must be performed before the earphones can be used to listen the music or communicate using a Bluetooth device. For further details regarding the pairing procedure, consult the users manual for your Bluetooth device.
(1) While the power of the unit is off, press and hold the Main Function Button until the unit enters paring mode. The paring mode is confirmed by LED indicators alternatively flashing blue and red. Release the Main Function Button after confirming that the LED indicator is alternately lighting blue and red.
(2) Turn on the power to the Bluetooth device you are going to pair with, and begin pairing; search for this unit (wireless earphones) from the paired Bluetooth device. Set Bluetooth device close (within one meter) to the wireless earphones. These wireless earphones will appear in the Bluetooth devices display as Pioneer SE-CL5BT.
(3) Conrm that pairing has been successfully completed with the Bluetooth device. Look at the display for the Bluetooth-enabled device and select Pioneer SE-CL5BT. When the LED is flashing in blue slowly about once every 3 seconds, pairing is completed. The PIN code for these wireless earphones has been factory set as 0000. Input this code if requested by the Bluetooth device. Connect to the Bluetooth device Confirm that the power to the wireless earphones is ON before connecting to the Bluetooth device. Depending on the device, connection between the wireless earphones and Bluetooth device may be effected automatically after pairing. Disconnecting from the Bluetooth device Press and hold the Main Function Button until the LED turns off and the power of the device turns off. 7. Enjoying Music To use the wireless earphones to listen to music from a Bluetooth device, you must first perform pairing with the Bluetooth device using the A2DP audio profile. For details on how to perform pairing, see < 5.Pairing >.
(1) With power to the wireless earphones turned off, hold the MFB depressed for about three seconds. The earphones power will turn on and the LED indicator will flash blue.
(2) Turn on the Bluetooth function on the device you wish to connect to. When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.
*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection. Controls when listening to music If the connected Bluetooth device supports AVFCP, the following operations can be used.
() button Press once: increase volume Press and hold: advance to next track or chapter
() button Press once: decrease volume Press and hold: advance to previous track or chapter Main Function Button Press once: Play / Pause
*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the headphones.
*Sound volume can be adjusted on the matching Bluetooth device.
*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.
*Depending on the specifications of the connected Bluetooth device, the music playback settings may need to be configured. Consult the users manual for the Bluetooth device.
*Depending on the specifications of the connected Bluetooth device, a music playback application may start automatically or the music cannot be paused/played. Consult the users manual for the Bluetooth device. 8. Vocal communication To use the wireless earphones for vocal communication, pairing must be performed with the desired Bluetooth device using the hands-free profile (HFP) or headset profile (HSP). For details on how to perform pairing, see < 5.Pairing >.
*If the Bluetooth device supports both profiles HFP & HSP, use the profile HFP.
(1) With power to the wireless earphones turned off, hold the Main Function Button depressed for about 3 seconds. The earphones power will turn on and the LED indicator will flash blue.
(2) Turn on the Bluetooth function on the device you wish to connect to. When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.
*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection. Vocal communication controls If the connected Bluetooth device supports AVRCP, the following operations can be used.
() button Press and hold: Increase volume
() button Press and hold: Decrease volume Main Function Button Press once when receiving a call: Enable conversation.Press once again to end conversation. Press and hold when receiving a call: Refuse communication The same controls are supported in the event a call is received while listening to music.
*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the earphones.
*Sound volume can be adjusted on the matching Bluetooth device.
*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.
*Depending on the specifications of the connected Bluetooth device, the phone settings may need to be configured. Consult the users manual of the Bluetooth device. Specication Basic Transmission format.....................................Bluetooth Standard Protocol Ver. 4.1 Maximum transmission distance...................................About 10m line of sight *1 Frequency used...........................................4GHz (2.400 GHz to 2.4835 GHz)*2 Supported Bluetooth profiles...............................................A2DP, AVRCP, HFP, HSP Supported CODEC...................................................................................SBC Battery life with continuous use........Maximum 8 hours of continuous transmission
(including music-play time) Recharging time.........................................................................About 2 hours Battery.................................. DC3.7V internally rechargeable Lithium-ion battery IPX level................................................................................................IPX-4 Weight.....................................................................................................21g Headphone Type............................................................Fully-enclosed dynamic earphones Driver units........................................................................................9.2mm Impedance..........................................................................................16 ohm Frequency response............................................................20 Hz ~ 20 000 Hz Sensitivity..............................................................................................95 dB Accessories S, M, L eartips..........................................................................................1pc Micro-USB cable (50cm)............................................................................1pc Warranty card(Europe / U.S.A. and Canada / Japan).....................................1pc Quick Start Guide (this document)...............................................................1pc Safety Guide.............................................................................................1pc
*1 Transmission distance is an approximation. Actual usable distance may vary depending on surrounding conditions.
*2 This product utilizes radio wave in the 2.4 GHz spectrum. Some signal dropouts may be experienced due to interference with radios, microwave ovens, and other devices using 2.4 GHz spectrum. Note Specifications and design are subject to possible modifications without notice due to improvements. About License and Trademarks Pioneer is a trademark of Pioneer Corporation, and is used under license. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Onkyo Corporation is under license. Other trademarks and trade name are those of their respective owners. Android is a trademark of Google Inc 4. Wearing the clipper///
5. Charging the batteries///
Unit 1033, 10/F., Star House, No. 3 Salisbury Road, Tsim Sha Tsui, Kowloon, Hong Kong 22828 Lockness Avenue Torrance, CA 90501 Tel: 424-223-5203 Tel: +44 (0) 208 363 500 2017 Pioneer & Onkyo Marketing Asia Limited 2017 Pioneer & Onkyo Marketing Asia Limited SE-CL5BT Before you start This document describes the information and operations required for startup. For more advanced operation procedures, read the instruction manual which is available on the website.
<Europe>
http://www.pioneer-audiovisual.eu/
<U.S.A.>
www.PioneerElectronics.com/Home
<Canada>
www.PioneerElectronics.ca/Home 1. Set Contents Confirm the presence of all parts and componets before use. 1: Earphone 2: Micro-USB cable 3: S, M, L eartips 4: Warranty card (Europe / U.S.A. and Canada / Japan) 5: Quick Start Guide (this document) 6: Safety Guide 2. Names of Parts (see Fig.2) 1: Main Function Button 2: Volume Up Button 3: Volume Down Button 4: LED Indicator 5: Micro-USB Port 6: Microphone 7: Clipper 3. Replacing the earphone tip (see Fig.3)
(1) Installation Press the mounting surface firmly onto the nozzle.Failure to press the tip fully onto the nozzle may cause the tip to come off.
(2) Removal Hold the earphone body securely and twist off the earphone tip. 4. Wearing the clipper how you like it The clipper is designed as a clothing clip. This gives you a variety of simple and practical wearing styles: Just clip it on your shirt, jacket, t-shirt or whatever that fits your needs. Just clip it on the necklineas shown in figure 4), collar edge, or wherever that fits your needs. 5. Charging the batteries The units battery must be recharged before use. The accessory micro-USB cable must be used for recharging the units battery. Connect the appropriate connector on the accessory micro-USB cable to the micro-
USB port on the earphones, and the USB plug on the other end to a USB port on a computer (see Fig.5). When recharging begins, the LED indicator on the earphone will light red. Full recharging requires about 2 hours, when recharging is completed, the LED indication will turn blue. Note Battery recharging time and usable battery time may vary depending on ambient temperature and frequency of use. Notes on battery charging Battery performance is influenced by surrounding temperature. Charge the supplied rechargeable batteries within a temperature range 10 to 35 degrees celcius. Batteries become slightly warm when charging. This is not a malfunction. Recharging may not be possible if computer is in power-saving mode. The unit cannot be used during charging. 6. Pairing Pairing must be performed before the earphones can be used to listen the music or communicate using a Bluetooth device. For further details regarding the pairing procedure, consult the users manual for your Bluetooth device.
(1) While the power of the unit is off, press and hold the Main Function Button until the unit enters paring mode. The paring mode is confirmed by LED indicators alternatively flashing blue and red. Release the Main Function Button after confirming that the LED indicator is alternately lighting blue and red.
(2) Turn on the power to the Bluetooth device you are going to pair with, and begin pairing; search for this unit (wireless earphones) from the paired Bluetooth device. Set Bluetooth device close (within one meter) to the wireless earphones. These wireless earphones will appear in the Bluetooth devices display as Pioneer SE-CL5BT.
(3) Conrm that pairing has been successfully completed with the Bluetooth device. Look at the display for the Bluetooth-enabled device and select Pioneer SE-CL5BT. When the LED is flashing in blue slowly about once every 3 seconds, pairing is completed. The PIN code for these wireless earphones has been factory set as 0000. Input this code if requested by the Bluetooth device. Connect to the Bluetooth device Confirm that the power to the wireless earphones is ON before connecting to the Bluetooth device. Depending on the device, connection between the wireless earphones and Bluetooth device may be effected automatically after pairing. Disconnecting from the Bluetooth device Press and hold the Main Function Button until the LED turns off and the power of the device turns off. 7. Enjoying Music To use the wireless earphones to listen to music from a Bluetooth device, you must first perform pairing with the Bluetooth device using the A2DP audio profile. For details on how to perform pairing, see < 5.Pairing >.
(1) With power to the wireless earphones turned off, hold the MFB depressed for about three seconds. The earphones power will turn on and the LED indicator will flash blue.
(2) Turn on the Bluetooth function on the device you wish to connect to. When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.
*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection. Controls when listening to music If the connected Bluetooth device supports AVFCP, the following operations can be used.
() button Press once: increase volume Press and hold: advance to next track or chapter
() button Press once: decrease volume Press and hold: advance to previous track or chapter Main Function Button Press once: Play / Pause
*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the headphones.
*Sound volume can be adjusted on the matching Bluetooth device.
*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.
*Depending on the specifications of the connected Bluetooth device, the music playback settings may need to be configured. Consult the users manual for the Bluetooth device.
*Depending on the specifications of the connected Bluetooth device, a music playback application may start automatically or the music cannot be paused/played. Consult the users manual for the Bluetooth device. 8. Vocal communication To use the wireless earphones for vocal communication, pairing must be performed with the desired Bluetooth device using the hands-free profile (HFP) or headset profile (HSP). For details on how to perform pairing, see < 5.Pairing >.
*If the Bluetooth device supports both profiles HFP & HSP, use the profile HFP.
(1) With power to the wireless earphones turned off, hold the Main Function Button depressed for about 3 seconds. The earphones power will turn on and the LED indicator will flash blue.
(2) Turn on the Bluetooth function on the device you wish to connect to. When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.
*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection. Vocal communication controls If the connected Bluetooth device supports AVRCP, the following operations can be used.
() button Press and hold: Increase volume
() button Press and hold: Decrease volume Main Function Button Press once when receiving a call: Enable conversation.Press once again to end conversation. Press and hold when receiving a call: Refuse communication The same controls are supported in the event a call is received while listening to music.
*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the earphones.
*Sound volume can be adjusted on the matching Bluetooth device.
*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.
*Depending on the specifications of the connected Bluetooth device, the phone settings may need to be configured. Consult the users manual of the Bluetooth device. Specication Basic Transmission format.....................................Bluetooth Standard Protocol Ver. 4.1 Maximum transmission distance...................................About 10m line of sight *1 Frequency used...........................................4GHz (2.400 GHz to 2.4835 GHz)*2 Supported Bluetooth profiles...............................................A2DP, AVRCP, HFP, HSP Supported CODEC...................................................................................SBC Battery life with continuous use........Maximum 8 hours of continuous transmission
(including music-play time) Recharging time.........................................................................About 2 hours Battery.................................. DC3.7V internally rechargeable Lithium-ion battery IPX level................................................................................................IPX-4 Weight.....................................................................................................21g Headphone Type............................................................Fully-enclosed dynamic earphones Driver units........................................................................................9.2mm Impedance..........................................................................................16 ohm Frequency response............................................................20 Hz ~ 20 000 Hz Sensitivity..............................................................................................95 dB Accessories S, M, L eartips..........................................................................................1pc Micro-USB cable (50cm)............................................................................1pc Warranty card(Europe / U.S.A. and Canada / Japan).....................................1pc Quick Start Guide (this document)...............................................................1pc Safety Guide.............................................................................................1pc
*1 Transmission distance is an approximation. Actual usable distance may vary depending on surrounding conditions.
*2 This product utilizes radio wave in the 2.4 GHz spectrum. Some signal dropouts may be experienced due to interference with radios, microwave ovens, and other devices using 2.4 GHz spectrum. Note Specifications and design are subject to possible modifications without notice due to improvements. About License and Trademarks Pioneer is a trademark of Pioneer Corporation, and is used under license. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Onkyo Corporation is under license. Other trademarks and trade name are those of their respective owners. Android is a trademark of Google Inc Before you start This document describes the information and operations required for startup. For more advanced operation procedures, read the instruction manual which is available on the website.
<Europe>
http://www.pioneer-audiovisual.eu/
<U.S.A.>
www.PioneerElectronics.com/Home
<Canada>
www.PioneerElectronics.ca/Home 1. Set Contents Confirm the presence of all parts and componets before use. 1: Earphone 2: Micro-USB cable 3: S, M, L eartips 4: Warranty card (Europe / U.S.A. and Canada / Japan) 5: Quick Start Guide (this document) 6: Safety Guide 2. Names of Parts (see Fig.2) 1: Main Function Button 2: Volume Up Button 3: Volume Down Button 4: LED Indicator 5: Micro-USB Port 6: Microphone 7: Clipper 3. Replacing the earphone tip (see Fig.3)
(1) Installation Press the mounting surface firmly onto the nozzle.Failure to press the tip fully onto the nozzle may cause the tip to come off.
(2) Removal Hold the earphone body securely and twist off the earphone tip. 4. Wearing the clipper how you like it The clipper is designed as a clothing clip. This gives you a variety of simple and practical wearing styles: Just clip it on your shirt, jacket, t-shirt or whatever that fits your needs. Just clip it on the necklineas shown in figure 4), collar edge, or wherever that fits your needs. 5. Charging the batteries The units battery must be recharged before use. The accessory micro-USB cable must be used for recharging the units battery. Connect the appropriate connector on the accessory micro-USB cable to the micro-
USB port on the earphones, and the USB plug on the other end to a USB port on a computer (see Fig.5). When recharging begins, the LED indicator on the earphone will light red. Full recharging requires about 2 hours, when recharging is completed, the LED indication will turn blue. Note Battery recharging time and usable battery time may vary depending on ambient temperature and frequency of use. Notes on battery charging Battery performance is influenced by surrounding temperature. Charge the supplied rechargeable batteries within a temperature range 10 to 35 degrees celcius. Batteries become slightly warm when charging. This is not a malfunction. Recharging may not be possible if computer is in power-saving mode. The unit cannot be used during charging. 6. Pairing Pairing must be performed before the earphones can be used to listen the music or communicate using a Bluetooth device. For further details regarding the pairing procedure, consult the users manual for your Bluetooth device.
(1) While the power of the unit is off, press and hold the Main Function Button until the unit enters paring mode. The paring mode is confirmed by LED indicators alternatively flashing blue and red. Release the Main Function Button after confirming that the LED indicator is alternately lighting blue and red.
(2) Turn on the power to the Bluetooth device you are going to pair with, and begin pairing; search for this unit (wireless earphones) from the paired Bluetooth device. Set Bluetooth device close (within one meter) to the wireless earphones. These wireless earphones will appear in the Bluetooth devices display as Pioneer SE-CL5BT.
(3) Conrm that pairing has been successfully completed with the Bluetooth device. Look at the display for the Bluetooth-enabled device and select Pioneer SE-CL5BT. When the LED is flashing in blue slowly about once every 3 seconds, pairing is completed. The PIN code for these wireless earphones has been factory set as 0000. Input this code if requested by the Bluetooth device. Connect to the Bluetooth device Confirm that the power to the wireless earphones is ON before connecting to the Bluetooth device. Depending on the device, connection between the wireless earphones and Bluetooth device may be effected automatically after pairing. Disconnecting from the Bluetooth device Press and hold the Main Function Button until the LED turns off and the power of the device turns off. 7. Enjoying Music To use the wireless earphones to listen to music from a Bluetooth device, you must first perform pairing with the Bluetooth device using the A2DP audio profile. For details on how to perform pairing, see < 5.Pairing >.
(1) With power to the wireless earphones turned off, hold the MFB depressed for about three seconds. The earphones power will turn on and the LED indicator will flash blue.
(2) Turn on the Bluetooth function on the device you wish to connect to. When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.
*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection. Controls when listening to music If the connected Bluetooth device supports AVFCP, the following operations can be used.
() button Press once: increase volume Press and hold: advance to next track or chapter
() button Press once: decrease volume Press and hold: advance to previous track or chapter Main Function Button Press once: Play / Pause
*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the headphones.
*Sound volume can be adjusted on the matching Bluetooth device.
*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.
*Depending on the specifications of the connected Bluetooth device, the music playback settings may need to be configured. Consult the users manual for the Bluetooth device.
*Depending on the specifications of the connected Bluetooth device, a music playback application may start automatically or the music cannot be paused/played. Consult the users manual for the Bluetooth device. 8. Vocal communication To use the wireless earphones for vocal communication, pairing must be performed with the desired Bluetooth device using the hands-free profile (HFP) or headset profile (HSP). For details on how to perform pairing, see < 5.Pairing >.
*If the Bluetooth device supports both profiles HFP & HSP, use the profile HFP.
(1) With power to the wireless earphones turned off, hold the Main Function Button depressed for about 3 seconds. The earphones power will turn on and the LED indicator will flash blue.
(2) Turn on the Bluetooth function on the device you wish to connect to. When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.
*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection. Vocal communication controls If the connected Bluetooth device supports AVRCP, the following operations can be used.
() button Press and hold: Increase volume
() button Press and hold: Decrease volume Main Function Button Press once when receiving a call: Enable conversation.Press once again to end conversation. Press and hold when receiving a call: Refuse communication The same controls are supported in the event a call is received while listening to music.
*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the earphones.
*Sound volume can be adjusted on the matching Bluetooth device.
*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.
*Depending on the specifications of the connected Bluetooth device, the phone settings may need to be configured. Consult the users manual of the Bluetooth device. Specication Basic Transmission format.....................................Bluetooth Standard Protocol Ver. 4.1 Maximum transmission distance...................................About 10m line of sight *1 Frequency used...........................................4GHz (2.400 GHz to 2.4835 GHz)*2 Supported Bluetooth profiles...............................................A2DP, AVRCP, HFP, HSP Supported CODEC...................................................................................SBC Battery life with continuous use........Maximum 8 hours of continuous transmission
(including music-play time) Recharging time.........................................................................About 2 hours Battery.................................. DC3.7V internally rechargeable Lithium-ion battery IPX level................................................................................................IPX-4 Weight.....................................................................................................21g Headphone Type............................................................Fully-enclosed dynamic earphones Driver units........................................................................................9.2mm Impedance..........................................................................................16 ohm Frequency response............................................................20 Hz ~ 20 000 Hz Sensitivity..............................................................................................95 dB Accessories S, M, L eartips..........................................................................................1pc Micro-USB cable (50cm)............................................................................1pc Warranty card(Europe / U.S.A. and Canada / Japan).....................................1pc Quick Start Guide (this document)...............................................................1pc Safety Guide.............................................................................................1pc
*1 Transmission distance is an approximation. Actual usable distance may vary depending on surrounding conditions.
*2 This product utilizes radio wave in the 2.4 GHz spectrum. Some signal dropouts may be experienced due to interference with radios, microwave ovens, and other devices using 2.4 GHz spectrum. Note Specifications and design are subject to possible modifications without notice due to improvements. About License and Trademarks Pioneer is a trademark of Pioneer Corporation, and is used under license. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Onkyo Corporation is under license. Other trademarks and trade name are those of their respective owners. Android is a trademark of Google Inc Before you start This document describes the information and operations required for startup. For more advanced operation procedures, read the instruction manual which is available on the website.
<Europe>
http://www.pioneer-audiovisual.eu/
<U.S.A.>
www.PioneerElectronics.com/Home
<Canada>
www.PioneerElectronics.ca/Home 1. Set Contents Confirm the presence of all parts and componets before use. 1: Earphone 2: Micro-USB cable 3: S, M, L eartips 4: Warranty card (Europe / U.S.A. and Canada / Japan) 5: Quick Start Guide (this document) 6: Safety Guide 2. Names of Parts (see Fig.2) 1: Main Function Button 2: Volume Up Button 3: Volume Down Button 4: LED Indicator 5: Micro-USB Port 6: Microphone 7: Clipper 3. Replacing the earphone tip (see Fig.3)
(1) Installation Press the mounting surface firmly onto the nozzle.Failure to press the tip fully onto the nozzle may cause the tip to come off.
(2) Removal Hold the earphone body securely and twist off the earphone tip. 4. Wearing the clipper how you like it The clipper is designed as a clothing clip. This gives you a variety of simple and practical wearing styles: Just clip it on your shirt, jacket, t-shirt or whatever that fits your needs. Just clip it on the necklineas shown in figure 4), collar edge, or wherever that fits your needs. 5. Charging the batteries The units battery must be recharged before use. The accessory micro-USB cable must be used for recharging the units battery. Connect the appropriate connector on the accessory micro-USB cable to the micro-
USB port on the earphones, and the USB plug on the other end to a USB port on a computer (see Fig.5). When recharging begins, the LED indicator on the earphone will light red. Full recharging requires about 2 hours, when recharging is completed, the LED indication will turn blue. Note Battery recharging time and usable battery time may vary depending on ambient temperature and frequency of use. Notes on battery charging Battery performance is influenced by surrounding temperature. Charge the supplied rechargeable batteries within a temperature range 10 to 35 degrees celcius. Batteries become slightly warm when charging. This is not a malfunction. Recharging may not be possible if computer is in power-saving mode. The unit cannot be used during charging. 6. Pairing Pairing must be performed before the earphones can be used to listen the music or communicate using a Bluetooth device. For further details regarding the pairing procedure, consult the users manual for your Bluetooth device.
(1) While the power of the unit is off, press and hold the Main Function Button until the unit enters paring mode. The paring mode is confirmed by LED indicators alternatively flashing blue and red. Release the Main Function Button after confirming that the LED indicator is alternately lighting blue and red.
(2) Turn on the power to the Bluetooth device you are going to pair with, and begin pairing; search for this unit (wireless earphones) from the paired Bluetooth device. Set Bluetooth device close (within one meter) to the wireless earphones. These wireless earphones will appear in the Bluetooth devices display as Pioneer SE-CL5BT.
(3) Conrm that pairing has been successfully completed with the Bluetooth device. Look at the display for the Bluetooth-enabled device and select Pioneer SE-CL5BT. When the LED is flashing in blue slowly about once every 3 seconds, pairing is completed. The PIN code for these wireless earphones has been factory set as 0000. Input this code if requested by the Bluetooth device. Connect to the Bluetooth device Confirm that the power to the wireless earphones is ON before connecting to the Bluetooth device. Depending on the device, connection between the wireless earphones and Bluetooth device may be effected automatically after pairing. Disconnecting from the Bluetooth device Press and hold the Main Function Button until the LED turns off and the power of the device turns off. 7. Enjoying Music To use the wireless earphones to listen to music from a Bluetooth device, you must first perform pairing with the Bluetooth device using the A2DP audio profile. For details on how to perform pairing, see < 5.Pairing >.
(1) With power to the wireless earphones turned off, hold the MFB depressed for about three seconds. The earphones power will turn on and the LED indicator will flash blue.
(2) Turn on the Bluetooth function on the device you wish to connect to. When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.
*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection. Controls when listening to music If the connected Bluetooth device supports AVFCP, the following operations can be used.
() button Press once: increase volume Press and hold: advance to next track or chapter
() button Press once: decrease volume Press and hold: advance to previous track or chapter Main Function Button Press once: Play / Pause
*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the headphones.
*Sound volume can be adjusted on the matching Bluetooth device.
*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.
*Depending on the specifications of the connected Bluetooth device, the music playback settings may need to be configured. Consult the users manual for the Bluetooth device.
*Depending on the specifications of the connected Bluetooth device, a music playback application may start automatically or the music cannot be paused/played. Consult the users manual for the Bluetooth device. 8. Vocal communication To use the wireless earphones for vocal communication, pairing must be performed with the desired Bluetooth device using the hands-free profile (HFP) or headset profile (HSP). For details on how to perform pairing, see < 5.Pairing >.
*If the Bluetooth device supports both profiles HFP & HSP, use the profile HFP.
(1) With power to the wireless earphones turned off, hold the Main Function Button depressed for about 3 seconds. The earphones power will turn on and the LED indicator will flash blue.
(2) Turn on the Bluetooth function on the device you wish to connect to. When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.
*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection. Vocal communication controls If the connected Bluetooth device supports AVRCP, the following operations can be used.
() button Press and hold: Increase volume
() button Press and hold: Decrease volume Main Function Button Press once when receiving a call: Enable conversation.Press once again to end conversation. Press and hold when receiving a call: Refuse communication The same controls are supported in the event a call is received while listening to music.
*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the earphones.
*Sound volume can be adjusted on the matching Bluetooth device.
*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.
*Depending on the specifications of the connected Bluetooth device, the phone settings may need to be configured. Consult the users manual of the Bluetooth device. Specication Basic Transmission format.....................................Bluetooth Standard Protocol Ver. 4.1 Maximum transmission distance...................................About 10m line of sight *1 Frequency used...........................................4GHz (2.400 GHz to 2.4835 GHz)*2 Supported Bluetooth profiles...............................................A2DP, AVRCP, HFP, HSP Supported CODEC...................................................................................SBC Battery life with continuous use........Maximum 8 hours of continuous transmission
(including music-play time) Recharging time.........................................................................About 2 hours Battery.................................. DC3.7V internally rechargeable Lithium-ion battery IPX level................................................................................................IPX-4 Weight.....................................................................................................21g Headphone Type............................................................Fully-enclosed dynamic earphones Driver units........................................................................................9.2mm Impedance..........................................................................................16 ohm Frequency response............................................................20 Hz ~ 20 000 Hz Sensitivity..............................................................................................95 dB Accessories S, M, L eartips..........................................................................................1pc Micro-USB cable (50cm)............................................................................1pc Warranty card(Europe / U.S.A. and Canada / Japan).....................................1pc Quick Start Guide (this document)...............................................................1pc Safety Guide.............................................................................................1pc
*1 Transmission distance is an approximation. Actual usable distance may vary depending on surrounding conditions.
*2 This product utilizes radio wave in the 2.4 GHz spectrum. Some signal dropouts may be experienced due to interference with radios, microwave ovens, and other devices using 2.4 GHz spectrum. Note Specifications and design are subject to possible modifications without notice due to improvements. About License and Trademarks Pioneer is a trademark of Pioneer Corporation, and is used under license. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Onkyo Corporation is under license. Other trademarks and trade name are those of their respective owners. Android is a trademark of Google Inc Before you start This document describes the information and operations required for startup. For more advanced operation procedures, read the instruction manual which is available on the website.
<Europe>
http://www.pioneer-audiovisual.eu/
<U.S.A.>
www.PioneerElectronics.com/Home
<Canada>
www.PioneerElectronics.ca/Home 1. Set Contents Confirm the presence of all parts and componets before use. 1: Earphone 2: Micro-USB cable 3: S, M, L eartips 4: Warranty card (Europe / U.S.A. and Canada / Japan) 5: Quick Start Guide (this document) 6: Safety Guide 2. Names of Parts (see Fig.2) 1: Main Function Button 2: Volume Up Button 3: Volume Down Button 4: LED Indicator 5: Micro-USB Port 6: Microphone 7: Clipper 3. Replacing the earphone tip (see Fig.3)
(1) Installation Press the mounting surface firmly onto the nozzle.Failure to press the tip fully onto the nozzle may cause the tip to come off.
(2) Removal Hold the earphone body securely and twist off the earphone tip. 4. Wearing the clipper how you like it The clipper is designed as a clothing clip. This gives you a variety of simple and practical wearing styles: Just clip it on your shirt, jacket, t-shirt or whatever that fits your needs. Just clip it on the necklineas shown in figure 4), collar edge, or wherever that fits your needs. 5. Charging the batteries The units battery must be recharged before use. The accessory micro-USB cable must be used for recharging the units battery. Connect the appropriate connector on the accessory micro-USB cable to the micro-
USB port on the earphones, and the USB plug on the other end to a USB port on a computer (see Fig.5). When recharging begins, the LED indicator on the earphone will light red. Full recharging requires about 2 hours, when recharging is completed, the LED indication will turn blue. Note Battery recharging time and usable battery time may vary depending on ambient temperature and frequency of use. Notes on battery charging Battery performance is influenced by surrounding temperature. Charge the supplied rechargeable batteries within a temperature range 10 to 35 degrees celcius. Batteries become slightly warm when charging. This is not a malfunction. Recharging may not be possible if computer is in power-saving mode. The unit cannot be used during charging. 6. Pairing Pairing must be performed before the earphones can be used to listen the music or communicate using a Bluetooth device. For further details regarding the pairing procedure, consult the users manual for your Bluetooth device.
(1) While the power of the unit is off, press and hold the Main Function Button until the unit enters paring mode. The paring mode is confirmed by LED indicators alternatively flashing blue and red. Release the Main Function Button after confirming that the LED indicator is alternately lighting blue and red.
(2) Turn on the power to the Bluetooth device you are going to pair with, and begin pairing; search for this unit (wireless earphones) from the paired Bluetooth device. Set Bluetooth device close (within one meter) to the wireless earphones. These wireless earphones will appear in the Bluetooth devices display as Pioneer SE-CL5BT.
(3) Conrm that pairing has been successfully completed with the Bluetooth device. Look at the display for the Bluetooth-enabled device and select Pioneer SE-CL5BT. When the LED is flashing in blue slowly about once every 3 seconds, pairing is completed. The PIN code for these wireless earphones has been factory set as 0000. Input this code if requested by the Bluetooth device. Connect to the Bluetooth device Confirm that the power to the wireless earphones is ON before connecting to the Bluetooth device. Depending on the device, connection between the wireless earphones and Bluetooth device may be effected automatically after pairing. Disconnecting from the Bluetooth device Press and hold the Main Function Button until the LED turns off and the power of the device turns off. 7. Enjoying Music To use the wireless earphones to listen to music from a Bluetooth device, you must first perform pairing with the Bluetooth device using the A2DP audio profile. For details on how to perform pairing, see < 5.Pairing >.
(1) With power to the wireless earphones turned off, hold the MFB depressed for about three seconds. The earphones power will turn on and the LED indicator will flash blue.
(2) Turn on the Bluetooth function on the device you wish to connect to. When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.
*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection. Controls when listening to music If the connected Bluetooth device supports AVFCP, the following operations can be used.
() button Press once: increase volume Press and hold: advance to next track or chapter
() button Press once: decrease volume Press and hold: advance to previous track or chapter Main Function Button Press once: Play / Pause
*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the headphones.
*Sound volume can be adjusted on the matching Bluetooth device.
*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.
*Depending on the specifications of the connected Bluetooth device, the music playback settings may need to be configured. Consult the users manual for the Bluetooth device.
*Depending on the specifications of the connected Bluetooth device, a music playback application may start automatically or the music cannot be paused/played. Consult the users manual for the Bluetooth device. 8. Vocal communication To use the wireless earphones for vocal communication, pairing must be performed with the desired Bluetooth device using the hands-free profile (HFP) or headset profile (HSP). For details on how to perform pairing, see < 5.Pairing >.
*If the Bluetooth device supports both profiles HFP & HSP, use the profile HFP.
(1) With power to the wireless earphones turned off, hold the Main Function Button depressed for about 3 seconds. The earphones power will turn on and the LED indicator will flash blue.
(2) Turn on the Bluetooth function on the device you wish to connect to. When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.
*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection. Vocal communication controls If the connected Bluetooth device supports AVRCP, the following operations can be used.
() button Press and hold: Increase volume
() button Press and hold: Decrease volume Main Function Button Press once when receiving a call: Enable conversation.Press once again to end conversation. Press and hold when receiving a call: Refuse communication The same controls are supported in the event a call is received while listening to music.
*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the earphones.
*Sound volume can be adjusted on the matching Bluetooth device.
*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.
*Depending on the specifications of the connected Bluetooth device, the phone settings may need to be configured. Consult the users manual of the Bluetooth device. Specication Basic Transmission format.....................................Bluetooth Standard Protocol Ver. 4.1 Maximum transmission distance...................................About 10m line of sight *1 Frequency used...........................................4GHz (2.400 GHz to 2.4835 GHz)*2 Supported Bluetooth profiles...............................................A2DP, AVRCP, HFP, HSP Supported CODEC...................................................................................SBC Battery life with continuous use........Maximum 8 hours of continuous transmission
(including music-play time) Recharging time.........................................................................About 2 hours Battery.................................. DC3.7V internally rechargeable Lithium-ion battery IPX level................................................................................................IPX-4 Weight.....................................................................................................21g Headphone Type............................................................Fully-enclosed dynamic earphones Driver units........................................................................................9.2mm Impedance..........................................................................................16 ohm Frequency response............................................................20 Hz ~ 20 000 Hz Sensitivity..............................................................................................95 dB Accessories S, M, L eartips..........................................................................................1pc Micro-USB cable (50cm)............................................................................1pc Warranty card(Europe / U.S.A. and Canada / Japan).....................................1pc Quick Start Guide (this document)...............................................................1pc Safety Guide.............................................................................................1pc
*1 Transmission distance is an approximation. Actual usable distance may vary depending on surrounding conditions.
*2 This product utilizes radio wave in the 2.4 GHz spectrum. Some signal dropouts may be experienced due to interference with radios, microwave ovens, and other devices using 2.4 GHz spectrum. Note Specifications and design are subject to possible modifications without notice due to improvements. About License and Trademarks Pioneer is a trademark of Pioneer Corporation, and is used under license. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Onkyo Corporation is under license. Other trademarks and trade name are those of their respective owners. Android is a trademark of Google Inc 1. Set Contents////
1 2 3
-
S E C L 5 B T 2. Names of Parts////
-
S E C L 5 B T 6 2 1 3 5 4 3. Replacing the earphone tip////
7 4. Wearing the clipper////
5. Charging the batteries////
Before you start This document describes the information and operations required for startup. For more advanced operation procedures, read the instruction manual which is available on the website.
<Europe>
http://www.pioneer-audiovisual.eu/
<U.S.A.>
www.PioneerElectronics.com/Home
<Canada>
www.PioneerElectronics.ca/Home 1. Set Contents Confirm the presence of all parts and componets before use. 1: Earphone 2: Micro-USB cable 3: S, M, L eartips 4: Warranty card (Europe / U.S.A. and Canada / Japan) 5: Quick Start Guide (this document) 6: Safety Guide 2. Names of Parts (see Fig.2) 1: Main Function Button 2: Volume Up Button 3: Volume Down Button 4: LED Indicator 5: Micro-USB Port 6: Microphone 7: Clipper 3. Replacing the earphone tip (see Fig.3)
(1) Installation Press the mounting surface firmly onto the nozzle.Failure to press the tip fully onto the nozzle may cause the tip to come off.
(2) Removal Hold the earphone body securely and twist off the earphone tip. 4. Wearing the clipper how you like it The clipper is designed as a clothing clip. This gives you a variety of simple and practical wearing styles: Just clip it on your shirt, jacket, t-shirt or whatever that fits your needs. Just clip it on the necklineas shown in figure 4), collar edge, or wherever that fits your needs. 5. Charging the batteries The units battery must be recharged before use. The accessory micro-USB cable must be used for recharging the units battery. Connect the appropriate connector on the accessory micro-USB cable to the micro-
USB port on the earphones, and the USB plug on the other end to a USB port on a computer (see Fig.5). When recharging begins, the LED indicator on the earphone will light red. Full recharging requires about 2 hours, when recharging is completed, the LED indication will turn blue. Note Battery recharging time and usable battery time may vary depending on ambient temperature and frequency of use. Notes on battery charging Battery performance is influenced by surrounding temperature. Charge the supplied rechargeable batteries within a temperature range 10 to 35 degrees celcius. Batteries become slightly warm when charging. This is not a malfunction. Recharging may not be possible if computer is in power-saving mode. The unit cannot be used during charging. 6. Pairing Pairing must be performed before the earphones can be used to listen the music or communicate using a Bluetooth device. For further details regarding the pairing procedure, consult the users manual for your Bluetooth device.
(1) While the power of the unit is off, press and hold the Main Function Button until the unit enters paring mode. The paring mode is confirmed by LED indicators alternatively flashing blue and red. Release the Main Function Button after confirming that the LED indicator is alternately lighting blue and red.
(2) Turn on the power to the Bluetooth device you are going to pair with, and begin pairing; search for this unit (wireless earphones) from the paired Bluetooth device. Set Bluetooth device close (within one meter) to the wireless earphones. These wireless earphones will appear in the Bluetooth devices display as Pioneer SE-CL5BT.
(3) Conrm that pairing has been successfully completed with the Bluetooth device. Look at the display for the Bluetooth-enabled device and select Pioneer SE-CL5BT. When the LED is flashing in blue slowly about once every 3 seconds, pairing is completed. The PIN code for these wireless earphones has been factory set as 0000. Input this code if requested by the Bluetooth device. Connect to the Bluetooth device Confirm that the power to the wireless earphones is ON before connecting to the Bluetooth device. Depending on the device, connection between the wireless earphones and Bluetooth device may be effected automatically after pairing. Disconnecting from the Bluetooth device Press and hold the Main Function Button until the LED turns off and the power of the device turns off. 7. Enjoying Music To use the wireless earphones to listen to music from a Bluetooth device, you must first perform pairing with the Bluetooth device using the A2DP audio profile. For details on how to perform pairing, see < 5.Pairing >.
(1) With power to the wireless earphones turned off, hold the MFB depressed for about three seconds. The earphones power will turn on and the LED indicator will flash blue.
(2) Turn on the Bluetooth function on the device you wish to connect to. When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.
*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection. Controls when listening to music If the connected Bluetooth device supports AVFCP, the following operations can be used.
() button Press once: increase volume Press and hold: advance to next track or chapter
() button Press once: decrease volume Press and hold: advance to previous track or chapter Main Function Button Press once: Play / Pause
*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the headphones.
*Sound volume can be adjusted on the matching Bluetooth device.
*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.
*Depending on the specifications of the connected Bluetooth device, the music playback settings may need to be configured. Consult the users manual for the Bluetooth device.
*Depending on the specifications of the connected Bluetooth device, a music playback application may start automatically or the music cannot be paused/played. Consult the users manual for the Bluetooth device. 8. Vocal communication To use the wireless earphones for vocal communication, pairing must be performed with the desired Bluetooth device using the hands-free profile (HFP) or headset profile (HSP). For details on how to perform pairing, see < 5.Pairing >.
*If the Bluetooth device supports both profiles HFP & HSP, use the profile HFP.
(1) With power to the wireless earphones turned off, hold the Main Function Button depressed for about 3 seconds. The earphones power will turn on and the LED indicator will flash blue.
(2) Turn on the Bluetooth function on the device you wish to connect to. When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.
*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection. Vocal communication controls If the connected Bluetooth device supports AVRCP, the following operations can be used.
() button Press and hold: Increase volume
() button Press and hold: Decrease volume Main Function Button Press once when receiving a call: Enable conversation.Press once again to end conversation. Press and hold when receiving a call: Refuse communication The same controls are supported in the event a call is received while listening to music.
*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the earphones.
*Sound volume can be adjusted on the matching Bluetooth device.
*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.
*Depending on the specifications of the connected Bluetooth device, the phone settings may need to be configured. Consult the users manual of the Bluetooth device. Specication Basic Transmission format.....................................Bluetooth Standard Protocol Ver. 4.1 Maximum transmission distance...................................About 10m line of sight *1 Frequency used...........................................4GHz (2.400 GHz to 2.4835 GHz)*2 Supported Bluetooth profiles...............................................A2DP, AVRCP, HFP, HSP Supported CODEC...................................................................................SBC Battery life with continuous use........Maximum 8 hours of continuous transmission
(including music-play time) Recharging time.........................................................................About 2 hours Battery.................................. DC3.7V internally rechargeable Lithium-ion battery IPX level................................................................................................IPX-4 Weight.....................................................................................................21g Headphone Type............................................................Fully-enclosed dynamic earphones Driver units........................................................................................9.2mm Impedance..........................................................................................16 ohm Frequency response............................................................20 Hz ~ 20 000 Hz Sensitivity..............................................................................................95 dB Accessories S, M, L eartips..........................................................................................1pc Micro-USB cable (50cm)............................................................................1pc Warranty card(Europe / U.S.A. and Canada / Japan).....................................1pc Quick Start Guide (this document)...............................................................1pc Safety Guide.............................................................................................1pc
*1 Transmission distance is an approximation. Actual usable distance may vary depending on surrounding conditions.
*2 This product utilizes radio wave in the 2.4 GHz spectrum. Some signal dropouts may be experienced due to interference with radios, microwave ovens, and other devices using 2.4 GHz spectrum. Note Specifications and design are subject to possible modifications without notice due to improvements. About License and Trademarks Pioneer is a trademark of Pioneer Corporation, and is used under license. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Onkyo Corporation is under license. Other trademarks and trade name are those of their respective owners. Android is a trademark of Google Inc Before you start This document describes the information and operations required for startup. For more advanced operation procedures, read the instruction manual which is available on the website.
<Europe>
http://www.pioneer-audiovisual.eu/
<U.S.A.>
www.PioneerElectronics.com/Home
<Canada>
www.PioneerElectronics.ca/Home 1. Set Contents Confirm the presence of all parts and componets before use. 1: Earphone 2: Micro-USB cable 3: S, M, L eartips 4: Warranty card (Europe / U.S.A. and Canada / Japan) 5: Quick Start Guide (this document) 6: Safety Guide 2. Names of Parts (see Fig.2) 1: Main Function Button 2: Volume Up Button 3: Volume Down Button 4: LED Indicator 5: Micro-USB Port 6: Microphone 7: Clipper 3. Replacing the earphone tip (see Fig.3)
(1) Installation Press the mounting surface firmly onto the nozzle.Failure to press the tip fully onto the nozzle may cause the tip to come off.
(2) Removal Hold the earphone body securely and twist off the earphone tip. 4. Wearing the clipper how you like it The clipper is designed as a clothing clip. This gives you a variety of simple and practical wearing styles: Just clip it on your shirt, jacket, t-shirt or whatever that fits your needs. Just clip it on the necklineas shown in figure 4), collar edge, or wherever that fits your needs. 5. Charging the batteries The units battery must be recharged before use. The accessory micro-USB cable must be used for recharging the units battery. Connect the appropriate connector on the accessory micro-USB cable to the micro-
USB port on the earphones, and the USB plug on the other end to a USB port on a computer (see Fig.5). When recharging begins, the LED indicator on the earphone will light red. Full recharging requires about 2 hours, when recharging is completed, the LED indication will turn blue. Note Battery recharging time and usable battery time may vary depending on ambient temperature and frequency of use. Notes on battery charging Battery performance is influenced by surrounding temperature. Charge the supplied rechargeable batteries within a temperature range 10 to 35 degrees celcius. Batteries become slightly warm when charging. This is not a malfunction. Recharging may not be possible if computer is in power-saving mode. The unit cannot be used during charging. 6. Pairing Pairing must be performed before the earphones can be used to listen the music or communicate using a Bluetooth device. For further details regarding the pairing procedure, consult the users manual for your Bluetooth device.
(1) While the power of the unit is off, press and hold the Main Function Button until the unit enters paring mode. The paring mode is confirmed by LED indicators alternatively flashing blue and red. Release the Main Function Button after confirming that the LED indicator is alternately lighting blue and red.
(2) Turn on the power to the Bluetooth device you are going to pair with, and begin pairing; search for this unit (wireless earphones) from the paired Bluetooth device. Set Bluetooth device close (within one meter) to the wireless earphones. These wireless earphones will appear in the Bluetooth devices display as Pioneer SE-CL5BT.
(3) Conrm that pairing has been successfully completed with the Bluetooth device. Look at the display for the Bluetooth-enabled device and select Pioneer SE-CL5BT. When the LED is flashing in blue slowly about once every 3 seconds, pairing is completed. The PIN code for these wireless earphones has been factory set as 0000. Input this code if requested by the Bluetooth device. Connect to the Bluetooth device Confirm that the power to the wireless earphones is ON before connecting to the Bluetooth device. Depending on the device, connection between the wireless earphones and Bluetooth device may be effected automatically after pairing. Disconnecting from the Bluetooth device Press and hold the Main Function Button until the LED turns off and the power of the device turns off. 7. Enjoying Music To use the wireless earphones to listen to music from a Bluetooth device, you must first perform pairing with the Bluetooth device using the A2DP audio profile. For details on how to perform pairing, see < 5.Pairing >.
(1) With power to the wireless earphones turned off, hold the MFB depressed for about three seconds. The earphones power will turn on and the LED indicator will flash blue.
(2) Turn on the Bluetooth function on the device you wish to connect to. When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.
*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection. Controls when listening to music If the connected Bluetooth device supports AVFCP, the following operations can be used.
() button Press once: increase volume Press and hold: advance to next track or chapter
() button Press once: decrease volume Press and hold: advance to previous track or chapter Main Function Button Press once: Play / Pause
*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the headphones.
*Sound volume can be adjusted on the matching Bluetooth device.
*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.
*Depending on the specifications of the connected Bluetooth device, the music playback settings may need to be configured. Consult the users manual for the Bluetooth device.
*Depending on the specifications of the connected Bluetooth device, a music playback application may start automatically or the music cannot be paused/played. Consult the users manual for the Bluetooth device. 8. Vocal communication To use the wireless earphones for vocal communication, pairing must be performed with the desired Bluetooth device using the hands-free profile (HFP) or headset profile (HSP). For details on how to perform pairing, see < 5.Pairing >.
*If the Bluetooth device supports both profiles HFP & HSP, use the profile HFP.
(1) With power to the wireless earphones turned off, hold the Main Function Button depressed for about 3 seconds. The earphones power will turn on and the LED indicator will flash blue.
(2) Turn on the Bluetooth function on the device you wish to connect to. When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.
*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection. Vocal communication controls If the connected Bluetooth device supports AVRCP, the following operations can be used.
() button Press and hold: Increase volume
() button Press and hold: Decrease volume Main Function Button Press once when receiving a call: Enable conversation.Press once again to end conversation. Press and hold when receiving a call: Refuse communication The same controls are supported in the event a call is received while listening to music.
*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the earphones.
*Sound volume can be adjusted on the matching Bluetooth device.
*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.
*Depending on the specifications of the connected Bluetooth device, the phone settings may need to be configured. Consult the users manual of the Bluetooth device. Specication Basic Transmission format.....................................Bluetooth Standard Protocol Ver. 4.1 Maximum transmission distance...................................About 10m line of sight *1 Frequency used...........................................4GHz (2.400 GHz to 2.4835 GHz)*2 Supported Bluetooth profiles...............................................A2DP, AVRCP, HFP, HSP Supported CODEC...................................................................................SBC Battery life with continuous use........Maximum 8 hours of continuous transmission
(including music-play time) Recharging time.........................................................................About 2 hours Battery.................................. DC3.7V internally rechargeable Lithium-ion battery IPX level................................................................................................IPX-4 Weight.....................................................................................................21g Headphone Type............................................................Fully-enclosed dynamic earphones Driver units........................................................................................9.2mm Impedance..........................................................................................16 ohm Frequency response............................................................20 Hz ~ 20 000 Hz Sensitivity..............................................................................................95 dB Accessories S, M, L eartips..........................................................................................1pc Micro-USB cable (50cm)............................................................................1pc Warranty card(Europe / U.S.A. and Canada / Japan).....................................1pc Quick Start Guide (this document)...............................................................1pc Safety Guide.............................................................................................1pc
*1 Transmission distance is an approximation. Actual usable distance may vary depending on surrounding conditions.
*2 This product utilizes radio wave in the 2.4 GHz spectrum. Some signal dropouts may be experienced due to interference with radios, microwave ovens, and other devices using 2.4 GHz spectrum. Note Specifications and design are subject to possible modifications without notice due to improvements. About License and Trademarks Pioneer is a trademark of Pioneer Corporation, and is used under license. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Onkyo Corporation is under license. Other trademarks and trade name are those of their respective owners. Android is a trademark of Google Inc
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2017-08-14 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2017-08-14
|
||||
1 | Applicant's complete, legal business name |
Pioneer & Onkyo Marketing Asia Limited
|
||||
1 | FCC Registration Number (FRN) |
0026592824
|
||||
1 | Physical Address |
Unit 1033, 10/F., Star House
|
||||
1 |
Hong Kong, N/A
|
|||||
1 |
Hong Kong
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
U******@SGS.COM
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AMH7
|
||||
1 | Equipment Product Code |
SECL5BT
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
S**** G******
|
||||
1 | Telephone Number |
+852 ********
|
||||
1 | Fax Number |
+852 ********
|
||||
1 |
s******@pioneeronkyoasia.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
||||
1 | Name |
K******** X********
|
||||
1 | Physical Address |
No.1 Workshop, M-10, Middle Section
|
||||
1 |
Shenzhen, 518057
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
07552********
|
||||
1 | Fax Number |
07552********
|
||||
1 |
k******@sgs.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
||||
1 | Name |
J****** S********
|
||||
1 | Physical Address |
No.1 Workshop, M-10, Middle Section
|
||||
1 |
Shenzhen, 518057
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
07552********
|
||||
1 | Fax Number |
07552********
|
||||
1 |
J******@sgs.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Pioneer SE-CL5BT | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power Output listed is conducted. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
SGS-CSTC Standards Technical Services Co.,Ltd.
|
||||
1 | Name |
J**** Z********
|
||||
1 | Telephone Number |
86755******** Extension:
|
||||
1 | Fax Number |
86075********
|
||||
1 |
J******@sgs.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0019000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC