10.1mPOS DASH/T3 PLUS User Menu 1 Series Model No:
DASH10EB DASH10AB Attention All other product names or trademarks are the property of their respective owners. V0.2 Warning Users:
1. Use of excessive fear of damage to eyesight 2. Use 30 minutes to rest 10 minutes 3. Children under 2 years old do not look at the screen; 2 years old and more than a day to see the screen not more than 1 hours Global security Announcement CE Conformity Statement Radio products with the CE alert marking comply with the R&TTE Directive
(1999/5/EC) issued by the Commission of the European Community. Compliance with this directive implies conformity to the following European Norms (in brackets are the equivalent international standards). EN 60950-1 (IEC60950-1) - Product Safety EN 300 328 Technical requirement for radio equipment ET S301 489 General EMC requirements for radio equipment Products that contain the radio transmitter are labeled with CE alert marking and may also carry the CE logo. MIT-W101 User Manual FCC Compliance Statement This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. 2 Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example: use only shielded interface cables when connecting to computer or peripheral devices). This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. 15.21 Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment for body-worn configuration in direct contact to the phantom. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. 3 WEEE EN 4 Following information is only for EU-member states:
The use of the symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. NCC Warning Management methods of low power radio-radiated motor Fourth, The use of this product should be avoided to affect the vicinity of the radar system operation. 12th, After the type of qualified low power RF motor, without permission, the company, firm or user may not arbitrarily change the frequency, increase power or change the original design features and functions. 14th, The use of a low-power RF motor shall not affect the safety of the flight and interfere with the lawful communication, and should be deactivated immediately upon discovery of interference, and shall be improved to no interference. Legal communication in the preceding paragraph means the radio letter of Operation according to the telecommunication regulations. Low-power RF motors must endure the interference of legitimate communications or industrial, scientific and medical Radio-radiated electrical equipment. Technical Supporting 5 1. Advantech website http://support.advantech.com, where you can find the latest information about the product. 2. If you need additional help, please contact your reseller, sales representative or Advantech Customer Service Center for technical Support. Before you call, please prepare the following information:
- Product Name and Serial Number
- Accessory Description
- Software InformationOS typeVersionApplication etc.
- Issue detail description
- Any error message or detail wordings Safety Notification 1. Please read these security instructions carefully. 2. Keep this user's manual for future reference. 3. Disconnect this device from the AC power outlet before cleaning. Do not use liquid or spray detergent for cleaning. 4. Keep the equipment away from dangerous areas. 5. Place the equipment on a reliable surface during installation. Falling or falling may cause damage. 6. Do not place this device in an environment where the storage temperature is below -10 or above 60 , or the device may be damaged. 7. Make sure that the power supply voltage is correct before connecting the device to the power outlet. 8. Place the AC power transformer where it cannot be trampled. Do not place anything on the power transformer. 9. Note All considerations and warnings on the device. 10. If the device is not in use for a long time, disconnect it from the power supply to prevent instantaneous overvoltage damage to the device. 11. Never pour any liquid into the Msr/ic card reader slot in the DASH/T3 PLUS series. This can cause fire or shock. 12. Do not open or disassemble the device. For security reasons, the device can only be opened by qualified maintenance personnel. 13. If any of the following conditions are true, please check the equipment by the maintenance personnel:
a. The power transformer plug is damaged. b. The liquid penetrates into the device. c. The equipment has been exposed to humid environments. d. The device is not working properly or is not working according to the user's manual. 6 e. There are obvious signs of breakage in the equipment. Battery Safety Notification 1. If you replace the incorrect battery type, there is a risk of explosion. 2. Do not attempt to disassemble the calculator or its attachments. 3. Only qualified personnel are allowed to replace the battery. 4. Do not place the battery in the fire and check with the local authorities for instructions. DASH/T3 PLUS equipped with standard battery pack only and TCL PR-2770E2N 7,000 mAH Lithium-ion batteries. Use of other batteries may cause a fire or explosion. Battery Charging Notification When charging a lithium ion battery pack, be sure to consider the ambient temperature. The method is more effective at normal room temperature or slightly cooler. Be sure to charge the battery within the specified range of 0c to 40c. Charging a battery outside a specified range can damage the battery and shorten its charging life cycle. Storage and security Notifications Although rechargeable lithium-ion batteries may not be used for several months, their capacity may be depleted due to the build-up of internal resistors. If this happens, they will need to recharge before use. Lithium-ion batteries can be stored at temperatures between 10 to 60 , but they can be depleted faster near the extreme temperatures of the range. It is recommended that the DASH/T3 Plus be stored in a normal indoor temperature range. Battery Recycling 7 8 TABLE OF CONTENT 1 Product Introduction ............................................................................................. 11 1.1 Common Symbols in the manual ................................................................................... 12 1.2 Product Function and Feature ....................................................................................... 12 1.3 Packing Content ............................................................................................................. 12 1.4 Product SPEC ................................................................................................................. 13 1.4.1 Technical SEPC ..................................................................... 13 1.4.2 Product Outlooking ................................................................ 14 1.5 DASH/T3 PLUS Interface ................................................................................................ 14 1.5.1 Front ................................................................................. 14 1.5.2 Back .................................................................................. 15 1.5.3 Right ................................................................................. 15 1.5.4 Left ................................................................................... 16 1.5.5 Top ................................................................................... 16 1.5.6 Bottom ............................................................................... 16 2 Starting .................................................................................................................... 17 2.1 Charging ......................................................................................................................... 17 2.2 Power On ....................................................................................................................... 17 2.3 StandBy Mode ............................................................................................................... 17 2.4 Computer Operation ..................................................................................................... 18 2.5 LED Indicator Status ...................................................................................................... 18 3 Setting ...................................................................................................................... 19 3.1 Windows 10 IoT Enterprise Setting ............................................................................... 19 3.2 Android 6.0.1 Setting ..................................................................................................... 19 4 Application Implement ......................................................................................... 22 4.1 Application Installation .................................................................................................. 22 4.1.1 Windows 10 IoT Enterprise OS Installation ..................................... 23 9 4.1.2 Android 6.0.1 OS Installation ..................................................... 24 5 Computer Maintenance ......................................................................................... 25 5.1 LCD Monitor Maintenance ............................................................................................ 25 5.2 DASH/T3 PLUS Cleaning ................................................................................................. 25 5.3 Trouble Shooting ........................................................................................................... 25 5.4 ENERGY STAR ................................................................................................................. 26 6 Declaration of the Presence Condition of Restricted Substance ................... 28 7 DASH/T3 PLUS Docking Installation .................................................................... 29 10 1 Product Introduction Thank you for purchasing DASH/T3 PLUS computer DASH/T3 PLUS Series SKU Table DASH10EB DASH10AB 4G/64G Windows 4G/64G Android a/b/g/n/ac a/b/g/n/ac The product combines stylish design, reliable performance and powerful functionality to meet your wide range of working requirements. This user's manual outlines the basic information you need to know to set up and use DASH/T3 Plus. If you have any further questions or questions, please contact our technical Support team via our website:
11 1.1 Common symbols in the manual Indicates the information that must be adhered to. This may result in personal injury or damage to the product. Represents information that provides assistance that can help you to use this product more smoothly. 1.2 Product Function and Feature Stylish and functional with only 8.5 mm thickness Low power consumption Intel ATOM process for mobile purpose. Build-in WLAN/Bluetooth function 10.1 WXGA TFT IPS LCD Panel and Capacitive 10-point touch supporting Micro USB 2.0 port DASH10EB is 4G/64G Windows WiFi a/b/g/n/ac DASH10AB is 4G/64G Android WiFi a/b/g/n /ac 1.3 Packing Content When you receive DASH/T3 Plus, make sure that all of the following items are in the package. If you are missing any of these items, please contact the distributor immediately. DASH/T3 PLUS Computer Quick Installation guide Power Adaptor 12 1.4 Product SPEC 1.4.1 Technical SPEC Product SKU Processor OS Memory Storage Monitor DASH10EB DASH10AB Intel Cherry Trail Z8350 1.92GHz Windows 10 4GB DDR3L Android6.0 4GB DDR3L 64GB eMMC 10.1" 1280x800 IPSG+G, 10 points Communication Module WiFi 802.11 a/b/g/n/ac WiFi 802.11 a/b/g/n/ac BT4.0 BT4.0 G-Sensor, Gyroscope, Light Sensor Camera Button LED I/O Operation Temp. Environ ment Charging Temp. Storage Temp. Operation Humidity Dimension/Weight Power Rear 5M(AF) Front 2M(FF) One Power Button One Volume up/down Button Charging: Orange 1x DC-IN jack 1xAudio jack (3.5mm,2 in1) 1x USB 3.0 port 1x Micro USB port(USB 2.0) 1x Micro HDMI Port 1x Micro SD Card Slot 1x Pogo Pin(9Pin) 0 ~35 0 ~35
-10 ~60 0%~85%
W259 x L170 x 8.5mm Power Adapter 5V7A Li-ion polymer battery, 3.7v@7000 mAh 13 1.4.2 Product Outlooking DASH/T3 PLUS series are with the same size. 1.5 DASH/T3 PLUS Interface 1.5.1 Front 1 2 No. Component 1 2 Front Camera Light Sensor Module 14 1.5.2 Back 1 1 No. 1.5.3 Right Rear Camera 1 2 3 4 No. Powerhole Microphone Micro SD Micro USB Micro HDMI USB3.0 Earphone 1 2 3 4 5 6 7 15 Component 5 6 7 Component 1.5.4 Left 1.5.5 TOP 1 2 No. Component Volume Adjustment Power Button 1 2 1.5.6 Bottom 2 2 1 No. Component Pogo Pin (to contact with Docking) Keyboard Guidepin 16 1 2 2 Starting 2.1 Charging To recharge the DASH/T3 PLUS 's built-in battery, connect the power supply transformer to the power hole interface on the DASH/T3 PLUS. Power hole Since the battery charge may drop during delivery, please charge at least one hour before starting the first boot. Do not use I/O interface when charging 2.2 Power On Continuous Press the power button for more than 3 seconds to open DASH/T3 PLUS. Power Button 2.3 Standby Mode When DASH/T3 Plus is running, press the power button for 1 seconds to put the device into standby mode to conserve electricity. The panel backlight is turned off, and the power button is pressed again to enable backlight and resume normal operation. 17 2.4 Computer Operation DASH/T3 PLUS is with 10.1 Capacitive Touch PanelYou can contact the panel directly with your finger to manipulate the computer. Operation Space 2.5 LED Indicator Status One LED indicator on DASH/T3 PLUS:
Power LED Indicator DASH/T3 PLUS Power LED indicator is mono color: Orange. 18 3 Setting Wireless base stations must be purchased prior to use of wireless networks. Please contact your wireless network equipment supplier to install and set up a wireless base station. The screenshot attached to this manual is used for reference. The actual screen may vary depending on your operating system or the version of the preinstalled software. 3.1 Windows 10 IoT Enterprise Setting Windows 10 IoT Enterprise Main Screen No. 1 2 3 4 5 Function 19 1 2 3 4 5 Open Program Battery Status WIFI Volume Adjustment Open Keyboard 3.2 Android 6.0.1 Setting Android 6.0.1 Screen 4 No. 1 2 3 Go Back Main Screen Background Program Open Program 20 1 2 3 4 Pull out the settings from the top of the screen 5 6 7 8 No. Function WiFi Backlight Adjustment Battery Status Bluetooth Setting 21 5 6 7 8 4 Application Implement 4.1 Application Installation There are several ways to install applications on DASH/T3 Plus, and this section describes the steps for installing applications via micro SD cards. 1. Please confirm your micro SD card has been formatted as FAT32 file system before installation 2. Copy installation file (Windows : .exe ; Android : .apk) to Micro SD. 3. Open the Micro SD card slot above your computer and put it in the card. Micro SD Slot 22 4.1.1 Windows 10 IoT Enterprise OS Installation a) Open the Starup program menu. b) Open File Explorerthe content of SD card will show Secure Digital storage device
(D:) c) Click Secure Digital storage device (D:) you can find .exe d) Click .exe file to install the application 23 4.1.2 Android 6.0.1 OS Installation a) Open Settings b) Open Storage & USB c) Select SD Card d) Click .apk to install the application 24 5 Computer Maintenance 5.1 LCD Monitor Maintenance Do not rub the screen surface with any hard objects Do not spray the liquid directly on the screen, or let excess liquid drip into the device Do not put anything on the screen at any time, such as food and drink, so as not to damage the screen Clean the LCD screen only with a soft cloth with water 5.2 DASH/T3 PLUS Cleaning Turn off the device and unplug the power cable. Wipe the screen and exterior with a soft damp cloth. Do not use liquid or aerosol cleaners on the screen, as this will cause the coating to fade and damage the screen MIT-W101 User Manual 5.3 Trouble Shooting When the system runs an exception, as in the following conditions:
1. Power not connected. 2. Computer shutdown disable. 3. Power LED indicator is disable while insert DC-in power adaptor. 4. The system does not respond to touch behavior. If you need assistance, please contact your reseller, sales representative or Advantech Customer Service Center for technical Support. Before you call, please prepare the following information:
Product name and serial number. Describe your perimeter with accessories. Description of the software (operating system, version, application software, etc.) A complete description of the problem. The exact word for any error message. 25 Symptom photos or movies (if any). 5.4 ENERGY STAR An ENERGY STAR qualified computer delivers substantial savings over a conventional computer. Desktop, integrated desktop, and notebook (laptop) computers, workstations, small-scale servers, and thin clients are all eligible to earn the ENERGY STAR, and those that do are now more efficient than ever. It is an honor for Advantech to provide you such products. What is ENERGY STAR?
ENERGY STAR is a U.S. Environmental Protection Agency (EPA) voluntary program that helps businesses and individuals save money and protect our climate through superior energy efficiency. The ENERGY STAR program was established by EPA in 1992, under the authority of the Clean Air Act Section 103(g). Section103(g) of the Clean Air Act directs the Administrator to "conduct a basic engineering research and technology program to develop, evaluate, and demonstrate nonregulatory strategies and technologies for reducing air pollution."
In 2005, Congress enacted the Energy Policy Act. Section 131 of the Act amends Section 324 (42 USC 6294) of the Energy Policy and Conservation Act, and
"established at the Department of Energy and the Environmental Protection Agency a voluntary program to identify and promote energyefficient products and buildings in order to reduce energy consumption, improve energy security, and reduce pollution through voluntary labeling of or other forms of communication about products and buildings that meet the highest energy efficiency standards."
For more information, please visit www.energystar.gov The product is to enter display sleep mode after 4 minutes and computer sleep mode after 10 minutes in default, to wake it from sleep mode, simply press the power button on the back cover, while under sleep mode it allows the device to save 80% or more energy. Power Management System:
Default mode is on balanced, after idle for 4 minutes, it will automatically shuts its 26 Monitor and enter sleep mode if idle for more than 10 minutes. Lists of default power management systems:
Balanced
(Default) High performance Idle 4 min. closes screen, 10 min. enters sleep mode. Never idle and never enters sleep mode. Screens used in this manual are for illustrative purposes only. Actual screens may vary depending on your product version. 27 6 Declaration of the Presence Condition of Restricted Substance Declaration of the Presence Condition of the Restricted Substances Marking
:
Equipment name nit
() DASH/T3 PLUS () Type designation (Type) Restricted substances and its chemical symbols Lead
(Pb) Mercury Cadmium
(Hg)
(Cd) Hexavalent chromium Polybrominate d biphenyls Polybrominate d diphenyl
(Cr+6)
(PBB) ethers (PBDE)
(D1~D37) Mother Board Panel PSU Chassis
(Coat Internal Fram) Len Module Microphone D13,D14,D16
,D21,D23 D13,D14,D16 D13,D14,D16 D13, D16 D14,D16 1. 0.1 wt % 0.01 wt %
Note 1Exceeding 0.1 wt %andexceeding 0.01 wt %indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2. Note 2 indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3. Note 3The indicates that the restricted substance corresponds to the exemption. 28 7 DASH/T3 PLUS Docking Installation 1 x 10 DASH/T3 PLUS 1 x Power Supply 1 x Quick Start Guide with power cord To turn on the DASH/T3 PLUS, press and hold the power button for 3 seconds.
*Note: Fully charge the tablet before first use*
Power Front View Back View DC-In Imager Trigger Micro USB Kensington Lock 29 Bottom View Top View Side View USB3.0 Port DASH/T3 PLUS Low Profile Docking Base Front View POGO Pin Back View 30 I/O Cover I/O Information Lower the tablet onto the base. You should feel a magnetic click once the tablet is seated properly. RS232 USB 2.0 DC in Jack Installation 31 Un-installation To easily remove the tablet from the dock, grip the handle and pull up the tablet. 32