FCC ID: 2ACKF-SL400RIFO SportDiver Underwater Smartphone Housing

0 Important Read this first How-to videos are available at: www.sealife-cameras.com/great-pictures-made-easy. Updates to this manual and troubleshooting are available at: www.sealife-cameras.com/manuals. Please register your SeaLife product online at: www.sealife-cameras.com/warranty. The manual content and specifications are subject to change without notice. The limited warranty applies only to the SeaLife SportDiver underwater housing (the Product). This limited warranty does not cover, and does not provide any remedy for damage to, any smartphones, other electronic devices, or other products, used in connection with the Product. Purchaser understands and agrees that while SeaLife has undertaken commercially reasonable efforts to ensure that the Product functions in accordance with SeaLifes applicable published specifications, some risk of flooding or other failure remains when the Product is used, which risk the Purchaser assumes. See page 56 for details. We recommend that you insure your smartphone through your wireless carrier for accidental loss and damages. We also recommend that you utilize cloud back-up storage (i.e. iCloud or Google Drive) to preserve your phones data in the event of a total loss. Do not directly or indirectly expose the underwater housing to spray-on sunscreens. Most spray-on sunscreens contain chemicals that may react with polycarbonate and other plastics, causing cracks and potential flooding. Read and follow additional Care & Maintenance instructions on page 49. iPhone, Apple App Store and iCloud are a registered trademark of Apple Inc Registered Trademarks Google Drive, Google Play and Android platform are a registered trademark of Google LLC Bluetooth is a registered trademark of Bluetooth Special Interest Group SeaLife and SportDiver are registered trademarks of Pioneer Research 1 Table of Contents Page #

3 I. Package contents 5 II. Optional accessories 6 III. Getting to know the housing... 9 IV. Setting up the housing........ V. Prepare the housing for underwater use.. 16 VI. After using the housing underwater.. 27 VII. Operating the housing 28 VIII. About the Settings Menu 33 IX. Great Pictures Made Easy. 45 X. Replacing the O-rings.... 47 XI. Care and Maintenance... 49 XII. Specifications 52 XIII. Troubleshooting 54 XIV. Spare parts and service.. 54 XV. FCC statement.. 54 XVI. Warranty statement. 56 2 I. Package contents SportDiver underwater housing (SL4001) Rubber grip tabs (12 each small, medium and large) (SL40008)

(10 medium tabs pre-installed in UW housing) Color-correction filter (SL40007) Vacuum pump (SL40006) Spare O-rings (1x Main O-ring and 1x Vacuum Check Port O-ring SL40010) O-ring lubricant (SL9807) 3 O-ring removal tool (SL9808) Deluxe padded wrist lanyard with BCD clip (SL72070) Instruction manual (English) (SL40024) AAA alkaline batteries (2) (SL40011) Moisture Muncher sampler pack (1 capsule)

(SL2523) 4 EVA carry case (SL40009) Note: Smaller accessories are packed in fabric bag, which is not shown in the above package contents. II. Optional accessories (Sold separately) Sea Dragon Photo-Video Light

(For best color and image quality) Moisture Muncher desiccant capsules 10-pack (SL911) SeaLife Photo Pro Backpack (SL940) Screen Shield (SL4005) Waterproof screen protector for SportDiver 5 Visit your local authorized SeaLife dealer or www.sealife-cameras.com for a complete listing of accessories. 6 III. Getting to know the housing 1 Shutter Lever 2 Vacuum Check Port 3 Underwater color-correction filter (removable) 4 Optical glass lens port (showing phone inside) 5 Display window (showing phone inside) 6 Mode button (Photo, Video, Settings, Playback) 7 Up button (Scroll up or increase zoom/focus) 8 Down button (Scroll down or decrease zoom/focus) 9 OK button (Confirm selection; Switch between zoom and manual focus)) 7 10 Main O-ring 11 Rubber grip tabs (Medium size pre-installed) 12 Holding spring with rubber grip pad 13 Moisture Muncher capsule cavity 14 Battery compartment (fits 2x AAA batteries) 15 Leak alarm status LED 16 Power / Bluetooth connection status LED 17 Power On/Off switch 18 Water sensor

(Activates leak alarm when water touches sensor) 8 19 Triple -20 tripod mounts 20 Lanyard connection point 21 Cam-Lock (Opens/closes housing) 9 IV. Setting up the housing 1. Open the underwater housing. Push and hold release button (A) and rotate cam-lock (B) counter-clockwise. Important: Do not attempt to open the housing when there is internal vacuum pressure. To release the vacuum pressure, unscrew the vacuum check port cap and use your fingertip to move the yellow rubber one-

way valve sideways. You will hear pressure releasing. Only release pressure when you and inside valve are dry. If the valve or your finger are not dry, water drops will be forced into the housing when releasing pressure. 10 2. Open the battery compartment by pulling down the locking tab (A) and lifting the battery cover (B). Insert two alkaline AAA batteries into the battery compartment. Make sure the batteries are inserted correctly according to the +/- polarity markings. Notes NiMH rechargeable AAA batteries may also be used. The Housing battery strength indicator on the top right of the app display will only show 3 bars with fully charged NiMH batteries. Single use batteries will last for approximately 50 hours of continuous use. 11 3. Insert Moisture Muncher desiccant capsule into cavity. Moisture Muncher absorbs the humidity inside the sealed housing and prevents fogging. A fresh new capsule is blue in color. Replace the capsule when granules turn pink in color. One sample capsule is included with the SportDiver. 10-packs of Moisture Muncher in resealable foil pouch may be purchased at your local SeaLife dealer. Insert one Moisture Muncher 10-Pack Moisture Muncher (SL911) 12 4. Attach padded wrist lanyard to the underwater housing as shown below. Loop the end of the lanyard through the lanyard hole (A). The clip (B) is used for attaching the housing to your BCD D-ring. Do NOT attach the clip to the housing. You may also attach the lanyard around your wrist, using the sliding lock (C) to tighten the lanyard. 13 5. Download SeaLife SportDiver app from Apple App Store or Google Play store. Search for SportDiver. After installing the app, accept all the permissions, which includes access to Photos, Camera, Microphone and Bluetooth. SeaLife does not collect data, track location, or gather any personal information from the SportDiver app. 14 6. Ten medium-sized rubber grip tabs (A) have been pre-installed into the housing as shown below. The rubber grip tabs and bow-shaped spring hold the phone in position and prevents the phone from moving around when the housing is sealed. Important: Do not install grip tabs in areas where the phones side buttons are located. Exchange the medium-sized grip tabs with small or large-sized tabs depending on the size of your phone. For larger phones, you may also remove left side grip tabs and only use small grip tabs along the bottom. The grip tab end is tapered. Make sure to install the tabs with the longer side up and shorter side down, which keeps the phone held down. 15 Rubber grip tabs Pre-installed medium-sized rubber grip tabs (A) 7. If your phone has a protective case, it is recommended to remove it. Insert the phone into housing to check the fit. Push the phone up against the bow-shaped spring until the bottom of the phone can be pushed down and held by the rubber grip tabs. Then, slide the phone left as far as possible. Over a soft surface, like a towel, check that the phone is securely held in position and that no grip tabs touch buttons on the side of the phone. Remove the phone by pushing up on the bow spring and lifting the phone up. Small phone with large rubber grip tabs installed Large phone with small rubber grip tabs installed Some phones with protective case may be small enough to securely fit inside the housing without removing the protective case. In that case, you may try leaving on the protective case. When the housing is powered on, touching the gold water sensor (located on the inside bottom right of the housing) will cause the Leak Alarm to activate. If that happens, power the housing Off and On again. 16 Note V. Prepare the housing for underwater use 1. Before underwater use, it is important to change the phone settings to: Airplane mode ON, Bluetooth ON, and Do Not Disturb ON. For iPhones only, turning True Tone OFF makes the display easier to see underwater. This ensures the SportDiver camera app operates with minimal battery power and without interruption while the phone is sealed inside the underwater housing. Go to Settings and turn On

> Airplane mode >

Bluetooth D N t Di t b iPhone Android 17 2. Fully charge your phone before each use. Consider using a power bank (5V portable charger) to charge your phone between dives if a wall charger is not available. Fully charge your phone before each use to avoid Low Battery pop-up message Note When your phone reaches <20% battery power, a Low Battery warning will pop-up. This message is generated by the phones operating system- not from the SportDiver app. The phones operating system does not allow disabling the Low Battery message. Consider lowering your phones display brightness to preserve battery power. The SportDiver app has a Power Save settings that will dim the display after 1, 3 or 5 minutes, depending on your setting. In Power Save, the camera live view will turn off. Push any button to exit Power Save mode. 18 3. To optimize image quality, use a lint-free cotton or micro-fiber cloth to clean the phone lens(es) and underwater housing glass port. 19 4. Inspect the main O-ring (A) and vacuum check port O-ring (B) for cuts or other damage. Remove the vacuum check port cap (C) to expose the O-ring. Clean both O-rings and opposing contact surfaces using a slightly dampened lint-free cloth. Replace the O-rings if damaged or every year. The SportDiver Spare O-ring Set (Item SL40010) includes the main O-ring and vacuum check port O-ring. 5. Put a small dab of silicone O-ring on your fingertip. Apply a thin film of silicone lube to the exposed surface of the main O-ring and vacuum check port O-ring. Use your fingertip to evenly spread the lube over the exposed O-ring surfaces. Only a thin film of lube is necessary. 20 6. Power On the underwater housing (A). The housing has two status LEDs to indicate Power/Bluetooth connectivity (B) and Leak Alarm status (C). The blue Power/Bluetooth LED and red Leak Alarm LED will both be blinking. If not, check that the batteries are installed correctly. 21 7. Power on your phone and open the SportDiver app. The app will display Waiting for Connection. The nearest phone with SportDiver app running will automatically connect to the housing. Please allow up to one minute for the phone to connect to the housing. Once connected, the blue Power/Bluetooth LED will stop blinking and turn solid blue, and the Bluetooth icon in the lower right of the display will turn from white to blue. Once the housing has connected, the app will display a pressure gauge. If so, proceed to the next step. If the phone does not automatically connect, power Off the housing and repeat step 6. Make sure your phone is close to the housing and app is open. Waiting for connection message Once connected a pressure gauge is displayed Note Do not touch the gold water sensor located on the inside bottom right of the housing. That will cause the Leak Alarm to activate and display a Leak Detected message. If that happens, power the housing Off and repeat steps 6 through 8. 22 8. Insert the phone into the housing, close the waterproof door and rotate the cam lock clockwise until it stops and locks in place. Make sure not to trap anything in the sealing area when closing the waterproof door. Note Do not touch the gold water sensor located on the inside bottom right of the housing. That will cause the Leak Alarm to activate and display a Leak Detected message. If that happens, power the housing Off and repeat steps 6 through 8. It is normal for there to be a small gap between the waterproof door and the front housing after the door is closed. Applying vacuum pressure in step 10 will close the gap. 23 9. Unscrew Vacuum Check Port cap. You will see a yellow rubber one-way valve (A), which allows air to be removed from the inside of the housing using the vacuum hand pump. 24 10. Press the rubber tip of the hand pump against the open vacuum check port and pump until the on-screen gauge needle reaches GOOD. It takes about 2 to 3 full pumps. Screw-on the vacuum check port cap!

Pump until gauge needle reaches GOOD Hand pump pressed against vacuum check port Note If you pumped too much, use your fingertip to move the yellow rubber one-way valve sideways and release some air pressure. Then, pump again until pressure is GOOD. If the gauge needle does not move when pumping, apply thin film of lube to the O-ring and try again. 25 11. When the vacuum pressure is good, the housing will start a 3.5-minute leak analysis to ensure the internal vacuum pressure is maintained and the housing is airtight. After the leak analysis is complete, a Waterproof Seal is Good message is displayed. Important Do not expose the housing to direct sunlight during the leak analysis. That may cause heat to build-up inside the housing, increasing internal air pressure and resulting in a leak alarm failure. Make sure to screw-on the vacuum check port cap. The vacuum check port without the cap is NOT waterproof and will cause the housing to leak. The internal vacuum pressure needs to be released before opening the housing. Use your fingertip to move the yellow rubber one-way valve sideways to release vacuum pressure. You and valve must be dry!

26 12. If a Leak Detected.> Internal pressure changed message appears during the leak analysis go back to step 6. Inspect the O-rings for damage - replace O-rings if damaged. Clean the O-rings and repeat steps 6 through 11. Note You may disable the leak alarm in the app settings. Disabling the leak alarm will bypass the 3.5-minute leak analysis described in step 11. If you disable the leak alarm, it is still important to apply internal vacuum pressure, which helps the waterproof seal. 27 VI. After using the housing underwater Follow these important steps after each underwater use:

1. Soak the sealed housing in fresh water for about 20 minutes. Push each button 20 times to flush out any 2. Towel-dry the housing. Make sure that you and the waterproof housing are completely dry before opening saltwater, sand or dirt trapped under the buttons. the vacuum check port cap and waterproof door. 3. Release the internal vacuum pressure before opening the housing. Unscrew the vacuum check port cap and use your fingertip to move the yellow rubber one-way valve sideways to release vacuum pressure. You and the check port valve must be completely dry when releasing pressure or water will enter the housing!

4. Make sure water drops around the O-ring sealing areas do not drip into the housing. Use a clean dry towel to dry any water drops that have entered the housing. 5. The leak alarm may activate (beep) when opening the waterproof door. Power Off the housing to turn off the leak alarm. 6. Follow the other care and maintenance instructions on page 49. 28 VII. Operating the housing The SportDiver has four primary modes Photo, Video, Settings and Playback. Push the Mode button switch modes. A blue line appears under the selected mode icon. to Photo mode for taking pictures Video mode for recording video Settings Menu mode for adjusting camera settings Playback mode for reviewing photos and videos 29 1. Taking a picture - Set mode to Photo and push the shutter lever (A). 2. Recording video - Set mode to Video and push the shutter lever (A) to start video recording. Push shutter lever again to stop recording. A red elapse timer will appear on top of the display when video is being recorded. Push shutter A to take picture or start/stop video recording 30 3. Changing settings Set mode to Settings Menu. Use the Up and down buttons to scroll through the main settings menu and push to enter a setting sub-menu. In the setting sub-menu, use and down buttons to scroll through setting options and push to confirm the setting. the Up Example of main setting with EV setting sub-menu. Note For information about each setting in the Settings Menu, please refer to chapter VIII, page 33. 31 4. Playback pictures and videos - Set mode to Playback. The last picture or video taken is displayed. A thumbnail strip on the right side highlights the single-view image displayed. Use the Up and down buttons to scroll through the images. Video clips will have a video camera icon on the thumbnail. Videos will start playing automatically when selected. You may delete any one file by pushing the OK button, selecting Yes and pushing OK to confirm. Single-view photo with thumbnail strip on the right Note Files are also saved to your phones Photos app in a folder titled SportDiver. Deleting a file in the SportDiver app will also delete the file in the Photos app. Deleting a file in the Photos app will also delete the file in the SportDiver app. Push OK button to open Delete this file? option 32 5. Zooming In Photo or Video modes, pushing the Up button increases the zoom. Pushing the down button decreases zoom. Example of 1X zoom (no zoom) Example of 4X zoom Note You may zoom from 1X (no zoom) to 10X zoom in 1.0x to 0.5x step increments. Zooming is disabled when Dual Lens, RAW+JPEG or Portrait Mode settings are enabled. When Focus is set to Manual, push the OK button to switch between zoom and Manual Focus (MF). 33 VIII. About the Settings Menu The SportDiver app Settings Menu includes most of the commonly used camera settings available on your phone, giving you creative control. The following settings may or may not be available, depending on the phone make/model and the operating system being used. The Settings Menu will change as app updates are released, and as new phone models and features become available. Please visit the app store or sealife-cameras.com for the latest updates. The following Settings Menu description is in two sections iPhone settings and Android settings:

34 iPhone Settings (Android phone users may skip this section) EV (Exposure Value) This setting adjusts the cameras auto exposure program. Increasing the value (+) results in a brighter image exposure. Decreasing the value (-) results in a darker image exposure. The EV setting can be adjusted from +3.0 to -3.0 in 0.3 step increments. Each step is equivalent to approximately 1 exposure stop. Focus There are two options Auto focus or Manual focus. Selecting Manual allows you to manually adjust the focus using the up/down buttons. When Manual is selected, push the OK button in Photo and Video modes to switch between zooming function and manual focus (MF) function. Manual focus can be adjusted from 0.00 (closest focus) to 1.00 (infinity focus) in 0.05 increments. This setting is useful when photographing smaller subjects in the foreground, but the camera attempts to focus on the larger background area. WB (White Balance) The white balance setting adjusts the color temperature of light that you are shooting in, so natural colors can be restored. For example, shooting a white object underwater [without photo-video lighting], will appear blue/green rather than white. Adjusting the white balance setting can offset this color shift effect and make this object appear white again. 35 The default WB setting is Auto, which works well in most ambient lighting environments and when using a photo-video light and/or the included color-correction filter. You may manually adjust the WB color temp from 3000K (kelvin) to 8000K to achieve a desired color effect. When a manual WB value is selected, the color effect can be fine-tuned using the Tint adjustments described below. SeaLife is testing different manual WB and Tint settings in varying underwater lighting conditions and depths and will post recommended settings to sealife-cameras.com when available. For best underwater colors, use an underwater photo-video light with at least 2000 lumens. More lumens is better. Set the WB to Auto when using a photo-video light. You may also use the included underwater color-correction filter in combination with the photo-video light to further enhance colors. Tint The Tint setting is only available when a manual WB setting is selected. You cannot adjust tint if WB is set to Auto. Tint allows you to fine-tune the manual WB color setting. The tint color scale ranges from -150

(green/yellow) to +150 (magenta) in 10-step increments. Using positive (+) values is more suitable for underwater. Lens If your iPhone has multiple camera lenses, you may select the lens of choice depending on what you are shooting. For most shots, the normal (wide) lens produces excellent results. The ultrawide lens is ideal for shooting larger subjects while keeping a close shooting distance. The telephoto lens is best for subjects that dont allow you to get close-up. 36 The focus range for each lens varies depending on your iPhone model. The normal and wide lenses typically allow close-up shooting distance of about 2 (5cm), while the telephoto lens has a minimum shooting distance of about 10 (25cm). If your iPhone has 2 or more lenses, you will see a dual lens option. Select dual lens setting and turn ON Portrait (Bokeh) mode for creating background blur effect. Please visit the SeaLife website for tutorials on how to use Dual Lens and Portrait settings for creating background blur and studio light effect. 3-lens iPhones will include a Triple Lens option. Triple lens allows you to quickly change optical lenses by zooming. 1.0X is the ultrawide lens, 2.0X is the Wide (normal) lens and 4.0X is the Telephoto. All other zoom values are optical plus some digital zoom. RAW+JPEG When RAW+JPEG is On, each photo taken will be saved as a standard .jpg image and as an unprocessed RAW .dng image. RAW files are not compressed or processed, and the file size tends to be about 4 times more than a compressed JPEG image. RAW images require post-editing using Adobe Photoshop or Lightroom. This setting is best used by photographers experienced in RAW image editing - It will take time and experience to acquire the skills needed to convert a RAW image file into a good quality image that is better than a standard processed JPEG image file. 37 Video Resolution Use this setting to select the desired video quality and frame rate. 1080p-30fps is high quality and suitable for most applications. 4K is the highest quality video but availability depends on the iPhone specification. Shooting in 4K or higher frame rate will create very large video files that can quickly fill-up your phones memory. Using 60 frames per second (fps) is recommended for faster moving subjects. Using 120 or 240 fps will playback in slow motion at 30 fps. The faster the frame rate, the larger the video file size will be. Photo + 3 sec. Video When Photo + 3 sec. Video is On, the app will capture a 3-second video clip with each still image. The video clip is captured 1.5 seconds before and 1.5 seconds after the still image is captured. The app will save two files one still image and one video clip. Portrait This setting works just like the Portrait mode of your native iPhone camera app, and is useful for creating background blur (Bokeh) and studio lighting effects. Only iPhones with two or more lenses can use this setting, because two lenses are needed to create background blur or Bokeh effect. Set the Lens to Dual Lens and then turn Portrait mode On. To adjust the amount of background blur desired, open the photo in your native iPhone Photos app and select Edit. Then, select the aperture () adjustment. A DEPTH slide bar will appear under the displayed image. Slide to the left for lower aperture and more background blur and right for higher aperture and less background blur. The select Done to save the photo. 38 Power Save Power save dims the screen after a certain amount of inactivity to save battery power. Push any button to exit the power save. You may select Off, 1, 3 or 5 minutes. The default Power Save time is 3 minutes. Display Brightness This setting adjusts the screen brightness. It ranges from 1.0 (brightest) to 0.0 (darkest) in 0.1 step increments. 0.8 is the default display brightness. Using a higher screen brightness makes it easier to see the display in bright sunny conditions but also uses more battery power. Leak Alarm The leak alarm can be turned Off if you want to bypass the 3.5-minute leak analysis described on section 5. The default setting is On. The SportDiver underwater housing features two leak alarms. One is the pre-dive vacuum pressure analysis described in section 5. The app will display a leak alarm alert if it detects an internal pressure changing during the 3.5-minute leak analysis. This leak alarm may be turned Off. The other leak alarm is a gold water sensor located on the inside bottom right of the underwater housing. The app will display a leak alarm alert if water, or any conductive object, like your finger, touches the sensor. This leak alarm cannot be disabled. Blocked-out settings The following chart shows which settings will be blocked out (not available) depending on other settings. For example, Dual Lens may not be selected when Focus is set to Manual. 39 Android Phone Settings (iPhone users please refer to previous section) Lens If your phone has multiple camera lenses, you may select the lens of choice depending on what you are shooting. For most shots, the wide lens produces excellent results. The Ultrawide lens is ideal for shooting larger subjects while keeping a close shooting distance. The Telephoto lens is best for subjects that dont allow you to get close-up. Important:

Some lenses may not be accessible, which is a limitation set by the phone maker. For example, Samsung Galaxy phones do not give access to the Telephoto lens that may change in the future. 40 Some lenses block-out other settings. For example, ultrawide lens does not allow Manual focusing with Android phones. Shutter Speed Select Auto for automatic shutter speed exposure or one of the manual shutter speed values to create a desired exposure effect. When manual shutter speed is used, the ISO setting must also be manually adjusted. ISO Select Auto for automatic ISO exposure or one of the manual ISO values to create a desired exposure effect. When manual ISO is used, the Shutter Speed setting must also be manually adjusted. Exposure Value (EV) This setting adjusts the cameras auto exposure program. Increasing the value (+) results in a brighter image exposure. Decreasing the value (-) results in a darker image exposure. Each step is equivalent to approximately 1 exposure stop. The EV setting is blocked-out when manual shutter speed and manual ISO are used. Focus There are two options Auto focus or Manual focus (MF). MF allows you to manually adjust the focus using the up/down buttons. When Manual is selected, push the OK button in Photo and Video modes to switch between Zoom and MF. Manual focus can be adjusted from 0.00 (closest focus) to 1.00 (infinity 41 focus) in 0.05 increments. This setting is useful when photographing smaller subjects in the foreground, but the camera attempts to focus on the larger background area. WB (White Balance) The white balance setting is used to compensate for the color temperature of the lighting environment you are shooting in, so natural colors are restored. For example, underwater photos and videos of a white object will appear blue because water absorbs red and yellow colors. The included red color-correction filter which works well to offset this blue color effect. You may fine-tune the white balance to create the desired color effect. For best underwater colors, use a photo-video light and set the white balance to Auto. It is okay to keep the red color-correction filter attached when using a photo-video to help boost the colors. There are two white balance setting menus. The White Balance (WB) setting includes presets, like Auto, Manual, Underwater Deep, Underwater Shallow, Daylight and Cloudy. The Manual WB includes all the manual WB values ranging from 2000K to 10000K in 100K increments. Select the appropriate white balance preset according to your environment. Here is description for each of the White Balance WB presets:

Auto - The Auto WB setting works well in most underwater lighting environments when used in combination with the color-correction filter or underwater photo-video light. Manual - Selecting Manual will allow you to manually adjust the white balance color temp (K) in the Manual WB setting. You may manually adjust the WB to achieve the desired color effect. Select the 42 kelvin (K) value equal to your lighting environment. For example, if the actual color temp of your environment is 6500K, set the manual WB to 6500K to offset the cooler, bluer lighting environment. Underwater Deep and Underwater Shallow These presets are designed to work with the included red color-correction filter. If the Auto WB setting [with red filter] does not achieve the desired colors, try using underwater deep for depths greater than 3m/10ft or underwater shallow for shallower depths. Daylight and Cloudy These presets are designed when shooting on land without the red color-correction filter. If the Auto WB setting [without red filter] does not achieve the desired colors, try using one of these presets according to your environment. Color Effect The Color Effect setting includes Mono (black & white), Negative and Sepia. Turn Color Effect OFF for full color. 3-Shot Burst When turned ON, pushing the shutter will capture 3 photos within 1 second. Photo Resolution Use this setting to adjust the image size or megapixels. The menu options will vary by phone make and model. The default setting is the usually the highest megapixel size available on the phone. 43 Video Resolution Select from HD720, HD1080 or UHD 4K video resolution, with UHD 4K being the highest, best quality video. 4K is only available if your phone make/model supports it. Some phone models will also include frame rate selection, like 30 frames per second (fps), 60 fps or higher. 1080p-30fps is high quality and suitable for most applications. Shooting at 4K or higher frame rate will create very large video files that can quickly fill-up your phones memory. RAW+JPEG When RAW+JPEG is On, each photo taken will be saved as a standard .jpg image and as an unprocessed RAW .dng image. RAW files are not compressed or processed, and the file size tends to be about 4 times more than a compressed JPEG image. RAW images require post-editing using Adobe Photoshop or Lightroom. This setting is best used by photographers experienced in RAW image editing - It will take time and experience to acquire the skills needed to convert a RAW image file into a good quality image that is better than a standard processed JPEG image file. Turning ON RAW + JPEG may disable other settings or functions, depending on your phone make & model. Power Save Power save dims the screen after a certain amount of inactivity to save battery power. Push any button to exit the power save. You may select Off, 1, 3 or 5 minutes. The default Power Save time is 3 minutes. Display Brightness 44 This setting adjusts the screen brightness. It ranges from 1.0 (brightest) to 0.0 (darkest) in 0.1 step increments. 0.8 is the default display brightness. Using a higher screen brightness makes it easier to see the display in bright sunny conditions but also uses more battery power. Leak Alarm The leak alarm can be turned Off if you want to bypass the 3.5-minute leak analysis described on section 5. The default setting is On. The SportDiver underwater housing features two leak alarms. One is the pre-dive vacuum pressure analysis described in section 5. The app will display a leak alarm alert if it detects an internal pressure changing during the 3.5-minute leak analysis. This leak alarm may be turned Off. The other leak alarm is a gold water sensor located on the inside bottom right of the underwater housing. The app will display a leak alarm alert if water, or any conductive object, like your finger, touches the sensor. This leak alarm cannot be disabled. On-screen Settings When turned ON, this will show the camera and exposure settings being used on the top or bottom of your phone display. For iPhones, go to Settings and scroll down to SportDiver app. There you will see the option to enable the on-screen settings. IX. Great Pictures Made Easy 45 Clear water visibility Clear water is essential for good results. Tiny particles floating in the water cause low visibility and poor image quality. Avoid stirring up the sea floor with your fins. Limit your shooting distance to 1/10 of the water visibility. For example, if the visibility is 40ft (12m), you should keep your shooting distance to within 4 feet (1.2m). Keep close shooting distance The ideal shooting distance is within 6ft (1.8m), and the closer the better. The phones minimum focus range varies depending on your model and lens selected but is typically about 2 (5cm). The phone can shoot excellent macro photos and videos, so take advantage of that feature. Move calmly and control your buoyancy It is awfully hard to take good photos or videos when you are moving around, or if your buoyancy is not controlled. Look around for great picture opportunities. Position yourself at the best angle and neutralize your buoyancy. Use the LCD monitor to perfectly frame your subject, check your shooting distance and keep the housing steady. Be calm and patient - Sometimes you must wait a little bit so fish that were frightened away, come back. Do not chase the fish, let the fish come to you. Always observe safediving rules. Take several photos of each subject You can always delete the bad shots later. 46 Avoiding blue photos and video Water reduces light and filters out red/yellow colors resulting in darker, bluer ambient lighting. There are two ways to restore the lost colors:

1) Use one or two SeaLife Sea Dragon underwater photo-video lights (optional accessory) to enhance colors and photo/video quality. This will result in best colors, brightness, and sharpness. 2) Use the included color-correction filter. The filter is most effective in blue water conditions at depth less than 50ft (15m). It is okay to use the filter when shooting with a Sea Dragon photo-video light. Visit the SeaLife website for updates and how-to tutorials Any updates to the manual or additional tips and advice can be found on the SeaLife website at www.sealife-

cameras.com. Ask your local SeaLife dive dealer about underwater photography courses. Most SeaLife dive dealers offer underwater photography courses which includes hands-on training as well as many helpful tips and techniques to underwater photography. 47 X. Replacing the O-rings The SportDiver underwater housing has two accessible O-rings that maintain a waterproof seal -

the main O-ring (A) and vacuum check port O-ring

(B). Replace the O-rings if damaged or every year. One spare O-ring set is included. See your authorized SeaLife dealer to purchase additional O-

ring Sets (Item SL40010) Remove the O-rings - Use the O-ring removal tool to lift and remove the O-ring from its groove. 48 Lube the O-rings - Before installing the O-rings, clean the O-rings with a slightly damped, lint-free cloth. Apply a thin film of silicone lube to each O-

ring. Use your fingertips to evenly spread the lube. Do not stretch the O-rings. Install O-rings Clean the O-ring grooves with a slightly damped, lint-free cloth. Carefully install the O-rings making sure not to twist the O-rings. Apply thin film of lube to O-rings Be careful not to twist the O-ring when installing 49 XI. Care and maintenance Every SeaLife SportDiver underwater housing is inspected for quality, including a 130ft (40m) pressure chamber test to ensure a waterproof seal. It is your responsibility to properly care for housing and maintain the O-ring sealing area. Carefully follow these important O-ring care instructions. Not following these care instructions may cause the waterproof housing to leak and void your warranty. DO NOT open the vacuum check port and release vacuum pressure unless you and the inside valve are dry. When vacuum is released, water drops in the valve area will be forced into the housing, causing damage to the internal electronics. 50 Avoid opening housing in wet, sandy, or humid environments. It is recommended to open and load the housing in dry cool air, such as inside an air-conditioned room. This will prevent water or humidity from being trapped inside the housing, which may cause fogging during underwater use. The underwater housing is depth tested to 130ft (40m). Exceeding this depth may cause the housing to flood and may result in damaging the underwater housing and phone. Do not directly or indirectly expose the underwater housing to spray-on sunscreens. Most spray-on sunscreens contain chemicals that may react with polycarbonate and other plastics, causing cracks that compromise the waterproof seal. If sunscreen gets on the housing, clean it with moistened soft cloth. After diving, soak the sealed housing in fresh water for about 20 minutes . Push each button 20 times to flush out saltwater, sand or dirt trapped under the buttons. Use clean, soft cloth to dry housing. Make sure that you and the waterproof housing are completely dry before opening the waterproof door. Store camera and housing only after careful cleaning and when totally dry. Keep the housings waterproof door slightly open when storing for more than 3 months. Do not use any household cleaners, soaps, detergents, or chemicals to clean the underwater housing. Chemicals may cause negative reaction with the plastic materials. 51 Replace O-ring every year to ensure proper seal. Only use the official SeaLife O-rings designed for the SportDiver underwater housing (Item # SL40010)). Replacement O-rings are available at your local authorized SeaLife dealer, or online at www.sealifepartsdirect.com (USA Only). Do not expose the housing to direct sunlight for prolonged periods of time. Keep housing in a shaded area or under a towel to prevent it from overheating. Do not disassemble or attempt to repair the housing as this will void your warranty. Contact your local authorized SeaLife dealer or the SeaLife Service Center in your country for repairs. Use the included lanyard to strap the underwater housing to your wrist or clip the housing to your BCD

(buoyancy control device). Do not let any moisture or dirt get inside housing when opening. This may result in fogging when using the camera underwater. Store housing at room temperature in a clean and dry place. 52 XII. Specifications For comprehensive product specifications, visit www.sealife-cameras.com SeaLife SportDiver Underwater Smartphone Housing Model Item #

SL400 / SL400-U (Same housing, but different packaging and manual) Certifications CE, FCC, Bluetooth SIG Listing, ROHS Depth rating 130ft (40m) Buoyancy

(in seawater) Controls Operating Temp. Positive + 2.8 oz. (80g) UW housing only with batteries, red filter and Moisture Muncher; without phone. Subtract weight of phone for total UW buoyancy Top: Shutter lever Back: Mode, Up, Down and OK Underwater: 33F to 110F (1C to 43C) 0F to 120F (-17C to 49C) Land:

O-ring Rabalon TPE material (item # SL40010) Lens port Optical glass lens port with anti-reflective coating on internal surface Tripod mount Triple -20 tripod threads for attaching accessories. 53 Housing material Radio frequency Polycarbonate body, TPE rubber, T6061 hard annodized lens frame and 304 - 316 series marine grade stainless steel metal hardware. Bluetooth Low Energy (LE) Frequency Band: 2402-2480MHz; RF Power: -1.95dBm Battery 2x AAA Alkaline (or NiMH rechargeable battery) Battery life Approx. 50 hours Weight 24.0 oz. (680g) UW housing only with batteries, filter, Moisture Muncher Dimensions External: 8.4 x 4.9 x 2.2 (213.1 mm x 125.7 mm x 54.8 mm) Internal: 6.3" x 3.1" x 0.6 (160 mm x 79 mm x 15mm) Warranty 1 year limited warranty. 54 XIII. Troubleshooting Please visit the SeaLife website at www.sealife-cameras.com. Go to the Technical Updates section and select SportDiver. There you will find the latest troubleshooting tips and advice. If repair service is still needed, please contact your local authorized SeaLife dealer for service. XIV. Spare parts and service If your SeaLife product needs service or if you need replacement parts, please contact your local authorized SeaLife dealer or visit the SeaLife website for instructions at www.sealife-cameras.com/parts-and-service/. XV. FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. 55 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. IC Statement

(RSS-Gen section 7.1.3) Canada, Industry Canada (IC) Notices This device complies with Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Canada, avis d'Industry Canada (IC) Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Radio Frequency (RF) Exposure Information The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has been evaluated for and shown compliant with the IC Specific Absorption Rate (SAR) limits when operated in portable exposure conditions. Informations concernant l'exposition aux frquences radio

(RF) La puissance de sortie mise par lappareil de sans fil est infrieure la limite d'exposition aux frquences radio d'Industry Canada (IC). Utilisez lappareil de sans fil de faon minimiser les contacts humains lors du fonctionnement normal. Ce dispositif a t valu pour et dmontr conforme la Taux IC d'absorption spcifique ("SAR") des limites lorsqu'il est utilis dans des conditions d'exposition portatifs. CE The SeaLife SportDiver SL400 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. 56 XVI. Limited Warranty Manufacturer warrants to the original purchaser (the Purchaser) of this product (the Product), provided the Product was at the time of purchase, new and unused and in its original packaging for a period of one (1) year from the date of purchase (the Warranty Period), that the Product is free from defects in workmanship and materials when used in accordance with Manufacturers published specifications. In the event that the Purchaser believes the Product contains a defect, the Purchaser should seek troubleshooting advice from the SeaLife website at www.sealife-cameras.com or the importer of the Product in the country in which the Product was purchased by the Purchaser. The local authorized SeaLife Dealer can also assist with Product servicing and, in the event it is determined that the product requires servicing, can issue to Purchaser a return authorization number. To be entitled to any remedy hereunder, Purchaser must return the Product to Manufacturer within the Warranty Period, at the senders risk, accompanied by the following (the Claim Requirements): (a) a Manufacturer issued return authorization number, (b) a letter describing in the defect in reasonable detail; (c) a valid address for the Purchaser; and (d) a copy of the original purchase receipt or proof of purchase specifying the purchase date of the Product For more information about repair service, or to locate a service center in your country, please visit the SeaLife website at www.sealife-cameras.com. Important: The foregoing limited warranty applies only to the Product sold by Manufacturer. This limited warranty does not cover, and does not provide any remedy for damage to, any smart phones, other electronic devices, or other products, used in connection with the Product. Purchaser understand and agrees that while Manufacturer has undertaken commercially reasonable efforts to ensure that the Product functions in accordance with Manufacturers applicable published specifications, some risk of flooding or other failure remains when the Product is used, which risk the Purchaser assumes. In the event Purchaser returns the Product to Manufacturer with the Claim Requirements, and Manufacturer is able to replicate the alleged defects or leaks, and determines in its reasonable discretion that the Product contains a defect in workmanship or materials, Manufacturer will, in its absolute and sole discretion, repair or replace this Product and return it to Purchaser free of charge. In the event that Manufacturer is unable to replicate alleged defects or leaks, or determines that the product does not contain a defect in workmanship or materials, Manufacturer will notify Purchaser and upon request by Purchaser Manufacturer will return the Product to Purchaser at Purchaser expense. 57 Excluded from this warranty are any damages caused by the failure to use the Product in accordance with Manufacturers published specifications, cosmetic damages, damages caused by abuse, misuse, wear, tear, water damage caused by damaged O-ring or O-ring contact surfaces or debris trapped between the product housing and the O-ring, damages caused by exposure to sunscreens or other chemicals, repair or attempted repair by unauthorized persons, improper storage, non-performance of scheduled maintenance, and battery leakage. THE FOREGOING IS PURCHASERS SOLE AND EXCLUSIVE REMEDY, AND MANUFACTURERS SOLE AND EXCLUSIVE OBLIGATION, WITH RESPECT TO A CLAIM THAT A PRODUCT IS DEFECTIVE. EXCEPT FOR THE LIMITED WARRANTY SET FORTH ABOVE, MANUFACTURER DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCT INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT. UNDER NO CIRCUMSTANCES SHALL MANUFACTURER BE LIABLE TO PURCHASER OR ANY THIRD PARTY FOR ANY SPECIAL, INCIDENTAL, INDIRECT, CONSEQUENTIAL OR PUNITIVE DAMAGES INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS, INJURIES TO PERSONS OR PROPERTY, OR DAMAGES FOR WHICH PURCHASER MAY BE LIABLE TO OTHER PERSONS OR ENTITIES, EVEN IF MANUFACTURER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND WHETHER THE CLAIM IS FOR BREACH OR REPUDIATION OF CONTRACT, BREACH OF WARRANTY, TORT, NEGLIGENCE OR OTHERWISE. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE FOREGOING LIMITATIONS MAY NOT APPLY. ANY OF THE FOREGOING NOTWITHSTANDING, IN NO EVENT SHALL MANUFACTURERS MAXIMUM AGGREGATE LIABILITY ARISING OUT OF OR RELATING TO THE SALE OF THE PRODUCT EXCEED THE PURCHASE PRICE PAID TO MANUFACTURER FOR THE PRODUCT. This limited warranty is governed by the laws of the State of New Jersey, U.S.A. Any warranty claim, or other dispute arising out of or related to this limited warranty or the Product, shall be brought exclusively in the state or federal courts located in the State of New Jersey, U.S.A., the exclusive jurisdiction and venue of which Purchaser and any party from which Purchaser purchased the Product, directly or indirectly, irrevocably consent to for this purpose. 58 SL40024 | May 2021 59

WATERPROOF @

Sealife SWSportDiver-

Fa 1; Ore I Model #:SL400-U FCC ID: 2ACKF-SL400RIFO. pero ea nee as ey This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, induding interference that may cause undesired operation. MADEINCHNA am MOISTURE MUNCHER yaaa

January 12, 2022 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Shenzhen Timeway Testing Laboratories/ Zone C, 1st Floor, Zone C, 1st Floor, Block B, Jun Xiang Da Building, Zhongshan Park Road West, Tong Le Village, Nanshan District, Shenzhen, China (Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with P i o n e e r R e s e a r c h / 97 Foster Road, Suite 5, Moorestown, NJ 08057, USA

<Signature>

NameBjorn Harms TitleVice President Applicant CompanyPioneer Research

January 12, 2022 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2ACKF-SL400RIFO Product Name: SportDiver Underwater Smartphone Housing Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:

Schematics Block diagram Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors.

<Signature>

NameBjorn Harms TitleVice President Applicant CompanyPioneer Research

Pioneer Research Statement We Pioneer Research Hereby Declare that The product SportDiver Underwater Smartphone Housing, models no. SL400-U, SL400 are all identical in interior structure, electrical circuits and components, and just the model names are different for the marketing requirement. Your assistance on this matter is highly appreciated. Yours sincerely,

<Signature>

NameBjorn Harms TitleVice President