USER MANUAL UWB TAG VT1001 Product Introduction General VT10001 UWB Tag has the function of detecting the distance between each other. When it detects that the distance between itself and any other UWB Tag is less than the preset distance, it will record this event and alarm. Typical application scenario is shown in the gure below. Panels descriptions in the table. The front panel of the UWB Tag is shown in the following gure with 3 4 Button function. Used to temporarily mute the alert Get Started Turn On UWB Tag Beep Hole Beeping when in alarm status. To use UWB Tag for the rst time, press the front button for more than 3 seconds to turn it on. The Tag will vibrate and beep if successfully The bottom panel of the UWB Tag contains the charging port, as turned on. shown in the following gure. PRODUCT INFORMATION CONTENTS General Panels Get Started Turn On UWB Tag Charging Basics Ranging Alarming Recording Uploading Operation Conditions Trouble Shooting Product Parameters Safety Instructions Data Privacy Consideration Disposal and Recycling Information Statement of Conformity Responsibility Statement 1 1 2 4 4 5 5 6 6 7 7 7 8 9 11 12 18 19 22
< 6 ft Vibration / alarm Description 1 Lanyard Hole Usedtotielanyard. Tag to tag distance 2 Status Indicator Working status:
In addition, with the help of UWB Gateway, UWB Tag can upload its alarm record. 1 Charging status:
--Blue and green ashing: Charging;
--Green always on: Battery charged full. 2
-- Green ashing: full battery;
-- Red ashing: low battery. Alarm status:
--Red light ashing: Alarm. Description 1 Charging Port For 5V1A microUSB charging. Charging UWB Tag needs to be charged in time to keep normal working status. You can check the battery level of UWB Tag through the status indicator. If the battery is low, please charge it before use. Avoid leaving the battery of the device uncharged for a long time. Follow the steps below to charge:
Use the original charger, or use a third-party charger with USB output interface and an output specication of 5VDC/1A. Check whether they are intact, clean and dry bottom panel of the UWB Tag;
Insert the Micro USB port of the charging cable to the charging port on Insert the USB port of the charging cable into the power adapter;
Basics uploading. Ranging per second. UWB TAG has four basic functions: ranging, alarming, recording and Recording beep and LED ashing for 10 seconds. But only the alarm is mute, the ranging, recording and uploading will not affected by this button. gateway is used and it is uploadedto the users own designated server. For details, please refer to user manual of the gateway (if also purchased). When turned on, the ranging function will start to run. UWB Tag will periodically try to measure the distance between itself and other UWB TAGs within a certain range. The general ranging period is once record. In LOS environment, the effective ranging range of UWB Tag is about 5m. In the NLOS environment, due to the inuence of occlusion, UWB tags may not be able to complete the ranging process, and the ranging error will increase. Please note that when the UWB tag is newly added to a ranging network, there is a ranging initialization recognition time. This length of time is generally 5 seconds (assuming that ranging frequency of the UWB TAG is 1Hz), and will vary with the scale of the ranging network. Alarming Alarm information will be recorded by UWB Tag, which includes Tag ID, duration, time stamps and contact distance etc. Only alarm information Operation Conditions will be recorded. If a UWB Tag has not had an alarm, there will be no Data information will be recorded in the UWB Tag, and the oldest records will be removed once the maximum recording capacity is reached so that the new information can be recorded. Uploading In the presence of UWB Gateway, UWB Tag uploads its alarm records. The effective data collection zone is a circle with a radius of 3m and centered on the UWB Gateway. If the UWB Tag is far from the data collection zone, it may not be able to upload its alarm records. During uploading, the alarm function of UWB Tags may be interfered. It will return to normal when leaving the data collection zone. Data Privacy Consideration The UWB Tag is based on ranging technology, it doesnt do the positioning of the wearers, but rather calculating the distance among each other. Please take into consideration local regulations related to data privacy while using the UWB Tag. Attention: data collection or upload is only possible when corresponding Exposure to liquid VT1001 UWB Tag is not water resistant. Always avoid exposing VT1001to liquids and moisture. Cleaning and care Keep UWB Tag clean and dry, but avoid damaging UWB Tag. Observe the following:
Dont clean UWB Tag while its charging. Dont dry UWB Tag using any external heat source (for example, a hair dryer). when cleaning your UWB Tag. Disinfection The following situations should be strictly avoided when disinfecting parts such as areas around the button and charging interfaces:
Spray or wipe the UWB Tag directly with disinfectant liquid (such as diethyl ether, alcohol, chlorine-containing disinfectant, peracetic acid etc.). Carry out re, boiling, owing steam, high heat steam, dry heat sterilization etc. on UWB Tags and accessories. Place the UWB Tag under ultraviolet light. Any other disinfection practices that may cause damage or safety issues. Use buttons Do not press the button on the UWB Tag hard or crack it violently. Charging cable If the cable is bent repeatedly in the same area, it could become hard and brittle. Please roll up the electric wire into downy curve. Please check the cables and connectors regularly to prevent them from knotting, breaking, bending or other damages. If any damage is found, do not continue to use the cable. Operating temperature UWB Tag is designed to work best in ambient temperatures between -10 temperatures between -20 be damaged and battery life could be shortened if stored or operated outside of these temperature ranges. Avoid exposing UWB Tag to dramatic changes in temperature or humidity.
) and be stored in
). UWB Tag can
) and +60
) and +70 and (158
(14
(-4
(140 The UWB Tag will ash the status light once every 3 seconds. If the status light does not ash for a long time, please press the button and hold it for 10 seconds. If the status light of UWB tag is still off, the battery power of your UWB Tag has been used up, or the UWB Tag is out of order. Please contact your system administrator in time. The UWB Tag uses UWB wireless communication, and should be used only in LOS condition. The UWB Tag will generate buzz, light and vibration alarms within the pre-set alarm distance. If you are within the pre-set alarm distance and there is no alarm, please contact your system administrator in time. 9 Dont use cleaning products, ultrasonic cleaners, or compressed air Trouble Shooting After turning on, UWB Tag will remain in a working status, and the user and green, then charging is normal. If the status indicator turns and preset alarm distance, it will warn the wearer by vibrating, buzzing and cannot turn it off autonomously. If you need to turn off UWB Tag, please remains in green, then the battery is charged full. (If the battery is LED ashing. contact the system administrator to achieve it with the help of completely empty before charging, then it will take some time to get Temporary mute function can be achieved by pressing the button on the UWB Gateway and related software. enough power to let the indicator work.) UWB Tag. After a short press of the button, UWB Tag will pause vibration, Switch on the power supply. The default alarm distance of UWB Tag is 2m. Once UWB Tag detects Check the status indicator. If the status indicator icks alternately in blue that the distance between itself and any other UWB Tag is less than the UWB wireless may penetrate some objects to establish connection, such as wooden box, shelf, hollow wall, etc. However, it may cause an increase in ranging error. There might be cases that the alarm of the tag is triggered e.g. when you and the other wearer are within the pre-set alarm distance while there is a separator (wooden box, shelf, hollow wall) between you. There might be cases that the alarm of the tag is not triggered e.g. when you and the other wearer are within the pre-set alarm distance but UWB Tags are separated by wearers body. Its NLOS condition and in reality, this situation should be considered safe. The vibration alarm of UWB Tag is only triggered within pre-set alarm distance. If you are far away from any other UWB Tag but the vibration alarm does not stop, it may be because the UWB Tag you are wearing is squeezed hard or entered with liquid, resulting in the short circuit of the vibration motor. Please contact the manager in time in this case. 3 4 5 6 7 8 10 Product Parameters Frequency Range 6.1GHz ~ 6.9GHz Transmit Power Density
< -41.3dBm/Mhz Communication Range
> 5m (LOS) Ranging Precision Average LOS precision up to10cm Safety Instructions Refresh Rate 1Hz by default Status Indication LED / vibration / buzzer Size Weight 85mmx54mmx6mm 30g excluding accessories Failure to follow these safety instructions could result in electric shock, re, injury, or damage to UWB Tag or other properties. Read carefully all the information about safety below before using the UWB Tag. The seller shall not be liable for any damages caused by misuse or violation against the instructions contained herein. Safety Power Endurance 12 Hours on average@1Hz Do not use UWB Tags when you are close to gasoline or liquid. Strictly Battery Capacity 480mAh/Rechargeable lithium battery follow all the indicated instructions and tips when you are in the petrol station. Charging Interface Micro USB The UWB Tag is an integrated equipment. Neither the battery nor the Operating Humidity 10% ~ 90% Non-condensing Do not store or transport equipment and its accessories in the same box the equipment with sharp tools, as the electrolyte inside the battery in Always keep the ports of UWB Tag and power adapter clean. restrict the use of electronic equipment. Although UWB Tag is designed, when their skin is touched by certain materials used in jewelry, watches mitigation, treatment, or prevention of any medical / health conditions or Never discard, replace or open the battery at will, nor try to penetrate damage to the UWB Tag and other properties. Radio frequency interferenceObserve signs and notices that prohibit or Skin sensitivities Some people may experience allergies or reactions diagnosis of disease or other medical conditions, or in the cure, equipment and its accessories, or swallow small parts that cause Battery or charging when humidity is high may cause re, electric shock, injury or Warning small children. medical assessment or judgement. It is not intended for use in the Storage Temperature
-20 ~ 70 suffocation or other dangers. Storage Humidity 5% ~ 95% Non-condensing with ammable gases, liquids or explosives. When disinfecting the equipment, do not spray or wipe it directly with ammable liquid to avoid re. Never disinfect the equipment during the charging process to avoid equipment damage or casualties. Keep the UWB Tag in a dust-free place when not using it, and do not leave it in an abandoned status. Please pay attention to the weather and environmental conditions (nature, dust, rain seeping, wet, rain, sea water etc.). The recommended operating temperature range is
-10
(14
) to + 60
(140
) and the storage humidity range is 5
-95 Damage might be caused when it is used in an environment
. exceeding + 60
(140
). The UWB Tag and the accessoriescomplywithapplicablesurface temperaturestandardsandlimits.However,evenwithintheselimits, the equipment may damage skin and clothes. Without adults monitoring, do not let children charge the UWB Tag. tested, and manufactured to comply with regulations governing radio or any other wearable items. This can be caused from allergies, disease. Please consult your healthcare provider all questions related to The equipment should be stopped from using if it is noticed to be hot, As long as the applicable surface temperature standards and limits are frequency emissions. Emissions from UWB Tag could potentially environmental factors, extended exposure to irritants or other causes. your health before considering use the UWB Tag. smelly, discolored, deformed or in any other abnormal status. met, UWB Tags, UWB Tag charging cables, and power adapters will negatively affect the operation of other electronic equipment within If you have past experiences from skin sensitivities, please take special Avoidradiofrequencyconicts WiFi6Eusesthe5925MHz-7125MHz If the battery leaks, do not expose the leaked liquid to your skin or eyes. function normally. However, please still try to avoid continuous contact certain distance. care when wearing UWB Tag. You might be more likely to experience frequencyband,which coversthefrequencybandforthisequipment. If exposed to skin or eyes, rinse immediately with clear water and take with hot surfaces even within the indicated limits as this may lead to Medical equipment interference UWB Tag contains components and irritations. Keeping UWB Tag clean and dry could reduce the possibility Using togetherwithWiFi6Eequipmentsmayinterferewiththis medical treatment at the hospital. discomfort or injury. After the power supply is plugged in, the UWB Tag, radios that emit electromagnetic elds. UWB Tag has certain coverage of of skin irritations. equipmentandmaynotworkproperly. Do not expose the batteries to high temperature or place it close to the UWB Tag charging cable and the power adapter will gradually radio frequency bands. These electromagnetic elds may interfere with Equipment safety The UWB Tag contains high-sensitivity electronic any heating equipment, such as sunshine, heater, microwave oven, oven heat up, but will not break the indicated limits. medical equipments, such as pacemakers and debrillators etc. Consult components. Falling, burning, puncturing or rolling could cause and water heater etc. Overheating batteries may cause explosion. Avoid wearing a UWB Tag when charging, or allowing your skin to your physician and medical equipment distributor for specic equipment damage. Disposal and Recycling Information Do not drill or incinerate the equipment or battery. Please consult the contact the UWB Tag, UWB Tag charging cable or power adapter during information related to your medical equipment and conrm whether you Ultra-wideband (UWB) equipment The use of ultra-wideband (UWB) UWB Tag disposal and recycling. local waste treatment department in accordance with the applicable long time while charging. For example, when the UWB Tag is charging, need to maintain a safe distance between the medical equipment and equipment in aircraft is prohibited. Ultra-wideband (UWB) can be turned Your UWB Tag should not be disposed of with household waste. Dispose local regulations including laws and policies when disposing your or when the UWB Tag charging cable, or the power adapter is the UWB Tag and the UWB Tag charging cable. Should you have any off through the corresponding software. The use of UWB has to be of your UWB Tag in accordance with local environmental laws equipment/battery. Batteries must be recycled or disposed of separately powered on, do not lie on it or place it under a blanket or pillow etc. suspects or doubts, you are recommended not to use this product compliant with the relevant regulations from the national radio and guidelines. sustainedcontactwithwarmsurfacesforlongperiodsoftimemaycause from household waste. Please be especially careful if your body has conditions that affect your
(including all parts and all accessories). management authorities. If the national spectrum plan changes, the discomfortorinjury.Continuous alert of the UWB Tag maymakethe Charging ability to sense heat. If the temperature of the UWB Tag makes you Explosive and other atmospheric conditions Charging or using UWB function of the equipment may not continue to function. and recycling of your product and/or its battery at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. BRASIL INFORMAES SOBRE DESCARTE E RECICLAGEM This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This equipment may not cause harmful interference, and (2) This equipment must accept any interference received, including interference O smbolo acima indica que este produto e/ou sua bateria no devem ser that may cause undesired operation. descartados no lixo domstico. Quando decidir descartar este produto e/ou sua bateria, faa-o de acordo com as leis e diretrizes ambientais locais. NFORMACIN SOBRE ELIMINACIN DE RESIDUOS Y RECICLAJE El smbolo de arriba indica que este producto y/o su batera no debe desecharse con los residuos domsticos. Cuando decidas desechar este producto y/o su batera, hazlo de conformidad con las leyes y directrices ambientales locales. Statement of Conformity FCC compliance statement Changes or modications to this product not authorized by Seller could void the wireless compliance and negate your authority to operate the product. This equipment is approved under Part 15.519 for handheld use. The use of antennas mounted on outdoor structures, e.g., antennas mounted on the outside of a building or on a telephone pole, or any xed outdoors infrastructure is prohibited. Antennas may be mounted only on the hand held UWB equipment. UWB equipments may not be employed for the operation of toys. Operation onboard an aircraft, a ship or a satellite is prohibited. Note: If your equipment is purchased through a local seller, please contact the local seller for the warranty service acquisition method. If your Charging Voltage 50.1V, 1000mA back cover can be removed. Removing the back cover of the UWB Tag equipmentfeelwarm.Removethe UWB Tagifitbecomesuncomfortably may damage the battery and lead to material leakage that may cause warm. Charging Time 4 ~ 6 Hours allergic reactions. Operating Temperature
-10 ~ 60 This equipment and its accessories may contain some small parts. Please keep the equipment and its accessories including the small parts out of reach of children. Children may inadvertently damage the Use the original charger, or use a third-party charger with USB output interface and an output specication of 5VDC/1A, and the charger should meet local safety regulation requirements. Usage of non-conforming third-party chargers may cause personal safety damage and/or battery damage. Please charge the battery in accordance with the requirements of the uncomfortable, please remove it. UWB Tag in any environment with explosive risk is strictly prohibited. Auxiliary ranging This equipment is only used to assist social distancing. European UnionDisposal Information instructions. Use the original charger, or use a third-party charger with USB Maintenance UWB Tag functionalities might be damaged or impaired when exposed There could be some systematic errors in the actual use. Any output The symbol above means that according to local laws and regulations output interface and an output specication of 5VDC/1A, and the charger Do not open the UWB Tag and try to repair it yourself. Disassembling to environment with high concentrations of industrial chemicals. Obey all from usage of this equipment cannot be used as solid rationale for any your product and/or its battery shall be disposed of separately from Please take attention that changes or modication not expressly approved equipment was purchased directly by the manufacturer, please get by the party responsible for compliance could void the users authority to in touch via support@pipernetworks.com. should meet local safety regulation requirements. When charging, remember the UWB Tag may cause damage injury. If the UWB Tag is damaged or to place the UWB Tag, UWB Tag charging cable and power adapter in a well-ventilated environment. Using a damaged UWB Tag charging cable out of normal status, please contact your seller in time. relevant signs, instructions and restrictions. Choking hazard Some UWB Tag accessories may present a choking hazard to babies or children. Keep them out of reach of babies and medical assessment / evaluation or any other conrmation. Not a medical equipment The UWB Tag is NOT designed as a medical equipment and should not be used as a replacement for professional household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. The separate collection operate the equipment. Disclaimer:The UWB Tag isnot intended to be used asatreatmentfor COVID-19 and also not as a protectiveequipmentagainstcontracting COVID-19.The UWB Tagisasocialdistancing equipment, can only be used in the context of social distancing and contact tracing between persons, any usage not related to social distancing are strictly prohibited. Dependingonthedesign of usage location / environment and the way how it is used, therecouldbefalsepositivesduetotissue, walls,structures or other factors and false negatives due to bodily interference, electromagneticinterference, orotherfactors.Wewarrantiesthat the UWB TagperformstotherequirementslistedontheUWB Tagspec sheet. All sales are nal. Responsibility Statement The product is an auxiliary tool, which cannot replace any safety management system, measure and rescue solution for hazardous operation or supervision system and measure for operation management. Please do not reduce safety awareness while using the product, and timely charge the product and check its operation state when the power is low. Measurement data and results of this product are for reference only, shall not be served as the basis for diagnosis and treatment. Products described in the Manual (including hardware and software) are all provided in the "current situation" within the maximum range allowed by laws, and there may exist defects, errors or faults. The Company does not provide express or implied guarantee in any form, or compensate for any special, incidental, accidental or indirect damages caused by using the Manual or products of the Company. The Company does not undertake any responsibility for any damage to personal or property interests of one's own or third party caused by failing to use the product according to the Manual and warning statement. The Company does not undertake any responsibility for any product operation abnormality, information disclosure or other problems caused by network attack, hacker virus infection or other unknown risks due to Internet access during product use. The product promoting pictures and advertisements are used only for instruction and promotion. Physical products prevail in all cases. 11 12 13 14 15 16 17 18 19 20 21 22