FCC ID: U8G-P1MT08 Peplink Pepwave Wireless Product

MAX Series User Manual Pepwave Products:

MAX 700 / HD2 / HD2 IP67 / HD2 Mini / HD2 MBX 5G / HD2 MBX / HD Dome / HD Dome Pro /

HD4 / HD4 MBX 5G / HD4 MBX / MBX Mini / HD4 IP67 / Transit / Transit Duo / Transit 5G /

Transit Core / Transit Mini / Transit Pro E / Transit Duo Pro / BR1 Classic / BR1 MK2 / BR1 Slim

/ BR1 ENT / BR1 M2M / BR1 Mini (HW2) / BR1 Mini (HW3) / BR1 Mini 5G / BR1 Mini Core /

BR1 Mini Core (HW3) / BR1 Mini M2M / BR1 ESN / BR1 Pro LTE / BR1 Pro (CAT-20) / BR1 Pro 5G / BR2 Pro / BR1 IP55 / BR1 IP67 / BR2 IP55 / On-The-Go / HD2 with MediaFast / HD4 with MediaFast / BR2 Micro / UBR LTE / UBR Plus / PDX Pepwave Firmware 8.4.0 April 2024 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. Copyright 2021 Peplink Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are trademarks of Peplink International Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners. Table of Contents Introduction and Scope Glossary 1 Product Features 1.1 Supported Network Features 1.2 Other Supported Features 2 Pepwave MAX Mobile Router Overview 2.1 MAX 700 2.2 MAX HD2 2.3 MAX HD2 IP67 2.4 MAX HD2 mini 2.5 MAX HD Dome 2.6 MAX HD Dome Pro 2.7 MAX Transit / MAX Transit Duo (CAT-12) 2.8 MAX Transit (CAT-18) 2.9 MAX Transit 5G 2.10 MAX Transit Mini 2.11 MAX Transit Pro E 2.12 MAX Transit Core 2.13 MAX Transit Duo Pro 2.14 MAX BR1 ESN 2.15 MAX HD2 and HD4 with MediaFast 2.16 MAX HD4 2.17 MAX HD4 MBX (CAT-12) 2.18 MAX HD2/4 MBX (CAT-20) 2.19 MAX HD2/4 MBX (5G) 2.20 MAX MBX Mini 2.21 MAX HD4 IP67 2.22 MAX BR1 Classic 2.23 MAX BR1 MK2 2.24 MAX BR1 Slim 2.25 MAX BR1 Mini (HW2) 2.26 MAX BR1 Mini (HW3) 2.27 MAX BR1 Mini 5G 2.28 MAX BR1 Mini Core 4 5 6 6 9 10 10 12 13 15 16 18 20 22 24 26 27 29 31 33 34 36 39 42 44 47 49 50 52 54 56 58 59 60 https://www.peplink.com 2 Copyright @ 2021 Peplink 2.29 MAX BR1 Mini Core (HW3) 2.30 MAX BR1 Mini M2M 2.31 MAX BR1 M2M 2.32 MAX BR1 ENT 2.33 MAX BR1 Pro 2.34 MAX BR1 Pro (CAT-20) 2.35 MAX BR1 Pro 5G 2.36 MAX BR2 Pro 2.37 MAX Hotspot 2.38 MAX BR1 IP55 2.39 MAX BR2 IP55 2.40 MAX BR1 IP67 2.41 MAX On-The-Go 2.42 BR2 Micro 2.43 UBR LTE 2.44 UBR Plus 2.45 PDX 3 Installation 4 Mounting the Unit 5 Connecting to the Web Admin Interface 6 AP 7 System 8 Status 9 Ignition Sensing Please refer to this link for the details of Ignition Sensing. Appendix A: Restoration of Factory Defaults Appendix B: FusionSIM Manual Appendix C: Ports usage overview Appendix D: Declaration 61 62 63 65 66 68 70 72 74 75 77 78 79 80 81 83 84 85 85 85 87 87 87 87 87 88 88 88 90 https://www.peplink.com 3 Copyright @ 2021 Peplink Introduction and Scope Pepwave routers provide link aggregation and load balancing across multiple WAN connections, allowing a combination of technologies like 3G HSDPA, EVDO, 4G LTE, Wi-Fi, external WiMAX dongle, and satellite to be utilized to connect to the Internet. The MAX wireless SD-WAN router series has a wide range of products suitable for many different deployments and markets. Entry level SD-WAN models such as the MAX BR1 are suitable for SMEs or branch offices. High-capacity SD-WAN routers such as the MAX HD2 are suitable for larger organizations and head offices. This manual covers setting up Pepwave routers and provides an introduction to their features and usage. Want to know more about Pepwave routers? Visit our YouTube Channel for a video introduction!

Tips https://youtu.be/13M-JHRAICA https://www.peplink.com 4 Copyright @ 2021 Peplink Glossary The following terms, acronyms, and abbreviations are frequently used in this manual:

Term 3G 4G DHCP DNS EVDO FQDN Definition 3rd generation standards for wireless communications (e.g., HSDPA) 4th generation standards for wireless communications (e.g., LTE) Dynamic Host Configuration Protocol Domain Name System Evolution-Data Optimized Fully Qualified Domain Name HSDPA High-Speed Downlink Packet Access HTTP ICMP IP LAN Hyper-Text Transfer Protocol Internet Control Message Protocol Internet Protocol Local Area Network MAC Address Media Access Control Address MTU MSS NAT PPPoE QoS SNMP TCP UDP VPN VRRP WAN WINS WLAN Maximum Transmission Unit Maximum Segment Size Network Address Translation Point to Point Protocol over Ethernet Quality of Service Simple Network Management Protocol Transmission Control Protocol User Datagram Protocol Virtual Private Network Virtual Router Redundancy Protocol Wide Area Network Windows Internet Name Service Wireless Local Area Network https://www.peplink.com 5 Copyright @ 2021 Peplink Product Features 1 Pepwave routers enable all LAN users to share broadband Internet connections, and they provide advanced features to enhance Internet access. Our Max BR wireless routers support multiple SIM cards. They can be configured to switch from using one SIM card to another SIM card according to different criteria, including wireless network reliability and data usage. Our MAX HD series wireless routers are embedded with multiple 4G LTE modems, and allow simultaneous wireless Internet connections through multiple wireless networks. The wireless Internet connections can be bonded together using our SpeedFusion technology. This allows better reliability, larger bandwidth, and increased wireless coverage compared to use only one 4G LTE modem. Below is a list of supported features on Pepwave routers. Features vary by model. For more information, please see peplink.com/products. 1.1 Supported Network Features 1.1.1 WAN Ethernet WAN connection in full/half duplex Static IP support for PPPoE Built-in cellular modems USB mobile connection(s) Wi-Fi WAN connection Network address translation (NAT)/port address translation (PAT) MAC address clone and passthrough Customizable MTU and MSS values WAN connection health check Dynamic DNS (supported service providers: changeip.com, dyndns.org, no-ip.org, Inbound and outbound NAT mapping IPsec NAT-T and PPTP packet passthrough tzo.com and DNS-O-Matic) Ping, DNS lookup, and HTTP-based health check 1.1.2 LAN Wi-Fi AP Ethernet LAN ports DHCP server on LAN https://www.peplink.com 6 Copyright @ 2021 Peplink Extended DHCP option support Static routing rules VLAN on LAN support 1.1.3 VPN SpeedFusion VPN with SpeedFusionTM SpeedFusion VPN performance analyzer X.509 certificate support VPN load balancing and failover among selected WAN connections Bandwidth bonding and failover among selected WAN connections IPsec VPN for network-to-network connections (works with Cisco and Juniper) Ability to route Internet traffic to a remote VPN peer Optional pre-shared key setting SpeedFusionTM throughput, ping, and traceroute tests PPTP server PPTP and IPsec passthrough 1.1.4 Firewall Outbound (LAN to WAN) firewall rules Outbound firewall rules can be defined by destination domain name Inbound (WAN to LAN) firewall rules per WAN connection Intrusion detection and prevention Specification of NAT mappings 1.1.5 Captive Portal Splash screen of open networks, login page for secure networks Customizable built-in captive portal Supports linking to outside page for captive portal 1.1.6 Outbound Policy Link load distribution per TCP/UDP service Persistent routing for specified source and/or destination IP addresses per TCP/UDP service Traffic prioritization and DSL optimization Prioritize and route traffic to VPN tunnels with Priority and Enforced algorithms 1.1.7 AP Controller https://www.peplink.com 7 Copyright @ 2021 Peplink Configure and manage Pepwave AP devices Review the status of connected APs 1.1.8 QoS Quality of service for different applications and custom protocols User group classification for different service levels Bandwidth usage control and monitoring on group- and user-level Application prioritization for custom protocols and DSL/cable optimization https://www.peplink.com 8 Copyright @ 2021 Peplink 1.2 Other Supported Features Firmware upgrades, configuration backups, ping, and traceroute via web admin interface User-friendly web-based administration interface HTTP and HTTPS support for web admin interface (default redirection to HTTPS) Configurable web administration port and administrator password Remote web-based configuration (via WAN and LAN interfaces) WINS client list *

UPnP / NAT-PMP Real-time, hourly, daily, and monthly bandwidth usage reports and charts Time server synchronization SNMP Email notification Read-only user access for web admin Shared IP drop-in mode Authentication and accounting by RADIUS server for web admin Built-in WINS servers*

Syslog SIP passthrough PPTP packet passthrough Event log Active sessions Client list IPv6 support Support USB tethering on Android 2.2+ phones

* Not supported on MAX Surf-On-The-Go, and BR1 variants https://www.peplink.com 9 Copyright @ 2021 Peplink Pepwave MAX Mobile Router Overview 2 2.1 MAX 700 2.1.1 Panel Appearance Note:

For proper Wi-Fi performance and operations, please ensure all 4 Wi-Fi antenna connectors (labeled Wi-Fi 1 and Wi-Fi 2) have antennas attached. The LED indicators of Wi-Fi 1 & 2 shown as below is referring to the default settings of Wi-Fi Operation mode is WAN + AP under the AP. https://www.peplink.com 10 Copyright @ 2021 Peplink 2.1.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

Status OFF Red Blinking red Blue Status Indicators System initializing Booting up or busy Boot up error Ready Wi-Fi 1 OFF ON Wi-Fi AP Indicators WiFi AP is disabled. WiFi AP is enabled. Wi-Fi 2 OFF Blinking slowly Blinking ON Wi-Fi WAN Indicators Disabled Intermittent Connecting to wireless network(s) Connected to wireless network(s) with traffic Connected to wireless network(s) without traffic LAN and Ethernet WAN Ports Green LED Orange LED Port Type ON Blinking OFF Auto MDI/MDI-X ports 10 / 100/ 1000 Mbps Data is transferring No data is being transferred or port is not connected https://www.peplink.com 11 Copyright @ 2021 Peplink 2.2 MAX HD2 2.2.1 Panel Appearance 2.2.2 LED Indicators https://www.peplink.com 12 Copyright @ 2021 Peplink The statuses indicated by the front panel LEDs are as follows:

Status Wi-Fi WAN OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready OFF Blinking slowly Blinking ON Wi-Fi WAN Indicators Disabled Intermittent Connecting to wireless network(s) Connected to wireless network(s) with traffic Connected to wireless network(s) without traffic Cellular Indicators Cellular 1 /

Cellular 2 OFF Blinking slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) Green LED Orange LED Port Type LAN and Ethernet WAN Ports ON OFF ON Blinking OFF Auto MDI/MDI-X ports 1000 Mbps 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Data is transferring Port is not connected 2.3 MAX HD2 IP67 2.3.1 Panel Appearance https://www.peplink.com 13 Copyright @ 2021 Peplink 2.3.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

Status OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready https://www.peplink.com 14 Copyright @ 2021 Peplink 2.4 MAX HD2 mini 2.4.1 Panel Appearance 2.4.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

Status OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready Cellular Indicators Cellular 1 /

Cellular 2 OFF Blinking slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) https://www.peplink.com 15 Copyright @ 2021 Peplink

LAN and Ethernet WAN Ports Green LED Orange LED Port Type ON OFF Blinking OFF Auto MDI/MDI-X ports POE Enabled POE Disabled 10 / 100 / 1000 Mbps and Data is transferring No data is being transferred or port is not connected 2.5 MAX HD Dome 2.5.1 Panel Appearance https://www.peplink.com 16 Copyright @ 2021 Peplink https://www.peplink.com 17 Copyright @ 2021 Peplink 2.6 MAX HD Dome Pro 2.6.1 Panel Appearance https://www.peplink.com 18 Copyright @ 2021 Peplink https://www.peplink.com 19 Copyright @ 2021 Peplink 2.7 MAX Transit / MAX Transit Duo (CAT-12) 2.7.1 Panel Appearance 2.7.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

Status OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready https://www.peplink.com 20 Copyright @ 2021 Peplink Cellular Indicators Cellular 1 /

Cellular 2*

OFF Blinking slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s)

* For MAX-TST_DUO Wi-Fi OFF Blinking Wi-Fi Indicators Wi-Fi AP is turn off Wi-Fi AP is turn on Green LED Orange LED Port Type LAN and Ethernet WAN Ports ON OFF ON Blinking OFF Auto MDI/MDI-X ports 1000 Mbps 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Data is transferring Port is not connected https://www.peplink.com 21 Copyright @ 2021 Peplink 2.8 MAX Transit (CAT-18) 2.8.1 Panel Appearance 2.8.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

Status OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready https://www.peplink.com 22 Copyright @ 2021 Peplink Cellular Indicators Cellular 1 /

Cellular 2*

OFF Blinking slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s)

* For MAX-TST_DUO Wi-Fi OFF Blinking Wi-Fi Indicators Wi-Fi AP is turn off Wi-Fi AP is turn on Green LED Orange LED Port Type LAN and Ethernet WAN Ports ON OFF ON Blinking OFF Auto MDI/MDI-X ports 1000 Mbps 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Data is transferring Port is not connected https://www.peplink.com 23 Copyright @ 2021 Peplink 2.9 MAX Transit 5G 2.9.1 Panel Appearance 2.9.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

Status OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready Cellular Indicators Cellular 1 /

Status OFF Blinking slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) Wi-Fi OFF Blinking Wi-Fi Indicators Wi-Fi AP is turn off Wi-Fi AP is turn on https://www.peplink.com 24 Copyright @ 2021 Peplink Green LED Orange LED Port Type LAN and Ethernet WAN Ports ON OFF ON Blinking OFF Auto MDI/MDI-X ports 1000 Mbps 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Data is transferring Port is not connected https://www.peplink.com 25 Copyright @ 2021 Peplink 2.10 MAX Transit Mini 2.10.1 Panel Appearance 2.10.2 LED indicators The statuses indicated by the front panel LEDs are as follows:

Status Wi-Fi OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready OFF Blinking slowly Blinking ON Wi-Fi Indicators Disabled intermittent Connecting to wireless network(s) Connected to wireless network(s) with traffic Connected to wireless network(s) without traffic Cellular Indicators Cellular OFF Blinking slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) https://www.peplink.com 26 Copyright @ 2021 Peplink 2.11 MAX Transit Pro E 2.11.1 Panel Appearance 2.11.2 LED indicators The statuses indicated by the front panel LEDs are as follows:

Status OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready Green LED Orange LED Port Type LAN 1 Port POE Enabled POE Disabled 10 / 100 / 1000 Mbps and Data is transferring No data is being transferred or port is not connected ON OFF Blinking OFF Auto MDI/MDI-X ports https://www.peplink.com 27 Copyright @ 2021 Peplink Green LED Orange LED Port Type LAN 2-3 Port and Ethernet WAN Port ON OFF ON 1000 Mbps 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Blinking OFF Auto MDI/MDI-X ports Data is transferring Port is not connected Cellular Indicators Cellular OFF Blinking slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) https://www.peplink.com 28 Copyright @ 2021 Peplink 2.12 MAX Transit Core 2.12.1 Panel Appearance 2.12.2 LED indicators Status indicated in the front panel is as follows:

Power LED OFF Power off GREEN Power on LED Indicator LAN 1 Port Green LED ON POE Enabled OFF - POE Disabled Orange LED Blinking 10 / 100 / 1000 Mbps with activity OFF No data is being transferred or port is not connected Port Type Auto MDI/MDI-X ports LAN 2-3 Ports, WAN Port Right LED GREEN 1000 Mbps OFF 10 / 100 Mbps or ports are not connected ORANGE Port is connected without traffic Left LED Blinking Data is transferring OFF Port is not connected https://www.peplink.com 29 Copyright @ 2021 Peplink Port Type Auto MDI/MDI-X ports Console & USB Ports Console Port Reserved for engineering use USB Ports For connecting 4G/3G USB modems https://www.peplink.com 30 Copyright @ 2021 Peplink 2.13 MAX Transit Duo Pro 2.13.1 Panel Appearance 2.13.2 LED indicators The statuses indicated by the front panel LEDs are as follows:

Status OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready Cellular Indicators Cellular 1 /

Cellular 2*

OFF Blinking slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) Wi-Fi OFF Blinking Wi-Fi Indicators Wi-Fi AP is turn off Wi-Fi AP is turn on https://www.peplink.com 31 Copyright @ 2021 Peplink Green LED Orange LED Port Type LAN and Ethernet WAN Ports ON OFF ON Blinking OFF Auto MDI/MDI-X ports 1000 Mbps 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Data is transferring Port is not connected https://www.peplink.com 32 Copyright @ 2021 Peplink 2.14 MAX BR1 ESN 2.14.1 Panel Appearance 2.14.2 LED indicators The statuses indicated by the front panel LEDs are as follows:

Status Wi-Fi OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready OFF Blinking slowly Blinking ON Wi-Fi Indicators Disabled intermittent Connecting to wireless network(s) Connected to wireless network(s) with traffic Connected to wireless network(s) without traffic Cellular Indicators Cellular OFF Blinking slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) https://www.peplink.com 33 Copyright @ 2021 Peplink 2.15 MAX HD2 and HD4 with MediaFast 2.15.1 Panel Appearance Note:

For proper Wi-Fi performance and operations, please ensure all 4 Wi-Fi antenna connectors (labeled Wi-Fi 1 and Wi-Fi 2) have antennas attached. The LED indicators of Wi-Fi 1 & 2 shown as below is referring to the default settings of Wi-Fi Operation mode is WAN + AP under the AP. For more details, please refer to the section 25.4. 2.15.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

Status OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready https://www.peplink.com 34 Copyright @ 2021 Peplink Wi-Fi 1 OFF Blinking slowly Blinking ON Wi-Fi WAN Indicators Disabled Intermittent Connecting to wireless network(s) Connected to wireless network(s) with traffic Connected to wireless network(s) without traffic Wi-Fi 2 OFF ON Wi-Fi AP Indicators WiFi AP is disabled. WiFi AP is enabled. Cellular Indicators Cellular 1 / 2 /

3 / 4 OFF Blinking slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) Green LED Orange LED Port Type Green LED Orange LED Port Type LAN Ports POE Enabled POE Disabled 10 / 100 / 1000 Mbps and Data is transferring No data is being transferred or port is not connected ON OFF Blinking OFF Auto MDI/MDI-X ports Ethernet WAN Ports ON OFF ON Blinking OFF Auto MDI/MDI-X ports 1000 Mbps 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Data is transferring Port is not connected https://www.peplink.com 35 Copyright @ 2021 Peplink 2.16 MAX HD4 2.16.1 Panel Appearance Note:

For proper Wi-Fi performance and operations, please ensure all 4 Wi-Fi antenna connectors (labeled Wi-Fi 1 and Wi-Fi 2) have antennas attached. The LED indicators of Wi-Fi 1 & 2 shown as below is referring to the default settings of Wi-Fi Operation mode is WAN + AP under the AP. For more details, please refer to the section 25.4 https://www.peplink.com 36 Copyright @ 2021 Peplink 2.16.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

Status Wi-Fi 1 OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready OFF Blinking slowly Blinking ON Wi-Fi WAN Indicators Disabled Intermittent Connecting to wireless network(s) Connected to wireless network(s) with traffic Connected to wireless network(s) without traffic Wi-Fi 2 OFF ON Wi-Fi AP Indicators WiFi AP is disabled. WiFi AP is enabled. Cellular Indicators Cellular 1 / 2 /

3 / 4 OFF Blinking slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) Green LED Orange LED Port Type LAN Ports POE Enabled POE Disabled 10 / 100 / 1000 Mbps and Data is transferring No data is being transferred or port is not connected ON OFF Blinking OFF Auto MDI/MDI-X ports https://www.peplink.com 37 Copyright @ 2021 Peplink Ethernet WAN Ports Green LED Orange LED Port Type ON OFF ON Blinking OFF Auto MDI/MDI-X ports 1000 Mbps 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Data is transferring Port is not connected https://www.peplink.com 38 Copyright @ 2021 Peplink 2.17 MAX HD4 MBX (CAT-12) 2.17.1 Panel Appearance Note:

For proper Wi-Fi performance and operations, please ensure all 4 Wi-Fi antenna connectors (labeled Wi-Fi 1 and Wi-Fi 2) have antennas attached. The LED indicators of Wi-Fi 1 & 2 shown as below is referring to the default settings of Wi-Fi Operation mode is WAN + AP under the AP. For more details, please refer to the section 25.4 2.17.2 LED Indicators https://www.peplink.com 39 Copyright @ 2021 Peplink The statuses indicated by the front panel LEDs are as follows:

Status Wi-Fi 1 OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready OFF Blinking slowly Blinking ON Wi-Fi WAN Indicators Disabled Intermittent Connecting to network(s) Connected to network(s) with traffic Connected to network(s) without traffic Wi-Fi 2 OFF ON Wi-Fi AP Indicators WiFi AP is disabled. WiFi AP is enabled. Cellular Indicators Cellular 1 / 2 /

3 / 4 OFF Blinking slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) Right Green Left Orange Right Green Left Orange OFF ON OFF Blinking ON OFF ON OFF Ethernet WAN Ports Port is not connected or slowed than 1000 Mbps Gigabit speed Port is not connected Data is transferring Port is connected without traffic Ethernet LAN Ports PoE disabled PoE enabled Port is not connected https://www.peplink.com 40 Copyright @ 2021 Peplink Blinking ON Data is transferring Port is connected without traffic https://www.peplink.com 41 Copyright @ 2021 Peplink 2.18 MAX HD2/4 MBX (CAT-20) 2.18.1 Panel Appearance Note:

For proper Wi-Fi performance and operations, please ensure all 4 Wi-Fi antenna connectors (labeled Wi-Fi 1 and Wi-Fi 2) have antennas attached. The LED indicators of Wi-Fi 1 & 2 shown as below is referring to the default settings of Wi-Fi Operation mode is WAN + AP under the AP. For more details, please refer to the section 25.4 2.18.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

Status OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready https://www.peplink.com 42 Copyright @ 2021 Peplink Wi-Fi 1 OFF Blinking slowly Blinking ON Wi-Fi WAN Indicators Disabled Intermittent Connecting to network(s) Connected to network(s) with traffic Connected to network(s) without traffic Wi-Fi 2 OFF ON Wi-Fi AP Indicators WiFi AP is disabled. WiFi AP is enabled. Cellular Indicators Cellular 1 / 2 /

3 / 4 OFF Blinking slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) Right Green Left Orange Right Green Left Orange OFF ON OFF Blinking ON OFF ON OFF Blinking ON Ethernet WAN Ports Port is not connected or slowed than 1000 Mbps Gigabit speed Port is not connected Data is transferring Port is connected without traffic Ethernet LAN Ports PoE disabled PoE enabled Port is not connected Data is transferring Port is connected without traffic https://www.peplink.com 43 Copyright @ 2021 Peplink 2.19 MAX HD2/4 MBX (5G) 2.19.1 Panel Appearance Note:

For proper Wi-Fi performance and operations, please ensure all 4 Wi-Fi antenna connectors (labeled Wi-Fi 1 and Wi-Fi 2) have antennas attached. The LED indicators of Wi-Fi 1 & 2 shown as below is referring to the default settings of Wi-Fi Operation mode is WAN + AP under the AP. For more details, please refer to the section 25.4 https://www.peplink.com 44 Copyright @ 2021 Peplink 2.19.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

Status Wi-Fi 1 OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready OFF Blinking slowly Blinking ON Wi-Fi WAN Indicators Disabled Intermittent Connecting to network(s) Connected to network(s) with traffic Connected to network(s) without traffic Wi-Fi 2 OFF ON Wi-Fi AP Indicators WiFi AP is disabled. WiFi AP is enabled. Cellular Indicators Cellular 1 / 2 /

3 / 4 OFF Blinking slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) Right Green Left Orange Right Green OFF ON OFF Blinking ON OFF ON Ethernet WAN Ports Port is not connected or slowed than 1000 Mbps Gigabit speed Port is not connected Data is transferring Port is connected without traffic Ethernet LAN Ports PoE disabled PoE enabled https://www.peplink.com 45 Copyright @ 2021 Peplink Left Orange OFF Blinking ON Port is not connected Data is transferring Port is connected without traffic https://www.peplink.com 46 Copyright @ 2021 Peplink 2.20 MAX MBX Mini 2.20.1 Panel Appearance Note:

For proper Wi-Fi performance and operations, please ensure all 4 Wi-Fi antenna connectors (labeled Wi-Fi 1 and Wi-Fi 2) have antennas attached. The LED indicators of Wi-Fi 1 & 2 shown as below is referring to the default settings of Wi-Fi Operation mode is WAN + AP under the AP. For more details, please refer to the section 25.4 2.20.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

LED Indicator Power LED OFF Power off GREEN Power on Ethernet WAN Ports Right Green Left Orange OFF ON OFF Blinking ON Port is not connected or slowed than 1000 Mbps Gigabit speed Port is not connected Data is transferring Port is connected without traffic https://www.peplink.com 47 Copyright @ 2021 Peplink Right Green Left Orange OFF ON OFF Blinking ON Ethernet LAN Ports PoE disabled PoE enabled Port is not connected Data is transferring Port is connected without traffic Wi-Fi 1 OFF Blinking slowly Blinking ON Wi-Fi WAN Indicators Disabled Intermittent Connecting to network(s) Connected to network(s) with traffic Connected to network(s) without traffic Wi-Fi 2 OFF ON Wi-Fi AP Indicators WiFi AP is disabled. WiFi AP is enabled. Cellular Indicators Cellular 1 / 2 OFF Blinking slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) Console & USB Ports Console Port Reserved for engineering use USB Ports For connecting 4G/3G USB modems https://www.peplink.com 48 Copyright @ 2021 Peplink 2.21 MAX HD4 IP67 2.21.1 Panel Appearance 2.21.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

Status OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready https://www.peplink.com 49 Copyright @ 2021 Peplink

2.22 MAX BR1 Classic 2.22.1 Panel Appearance 2.22.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

Status OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready https://www.peplink.com 50 Copyright @ 2021 Peplink Wi-Fi OFF Blinking slowly Blinking ON Wi-Fi Indicators Disabled intermittent Connecting to wireless network(s) Connected to wireless network(s) with traffic Connected to wireless network(s) without traffic Cellular Indicators Cellular OFF Blinking slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) https://www.peplink.com 51 Copyright @ 2021 Peplink 2.23 MAX BR1 MK2 2.23.1 Panel Appearance 2.23.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

Status Wi-Fi OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready OFF Blinking slowly Blinking ON Wi-Fi Indicators Disabled intermittent Connecting to wireless network(s) Connected to wireless network(s) with traffic Connected to wireless network(s) without traffic https://www.peplink.com 52 Copyright @ 2021 Peplink Cellular Indicators Cellular OFF Blinking slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) Green LED Orange LED Port Type LAN and Ethernet WAN Ports ON OFF ON Blinking OFF Auto MDI/MDI-X ports 1000 Mbps 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Data is transferring Port is not connected https://www.peplink.com 53 Copyright @ 2021 Peplink 2.24 MAX BR1 Slim 2.24.1 Panel Appearance 2.24.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

Status Wi-Fi OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready OFF Blinking slowly Blinking ON Wi-Fi Indicators Disabled intermittent Connecting to wireless network(s) Connected to wireless network(s) with traffic Connected to wireless network(s) without traffic Cellular Indicators Cellular OFF Blinking slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) https://www.peplink.com 54 Copyright @ 2021 Peplink Green LED Orange LED Port Type LAN and Ethernet WAN Ports ON OFF ON Blinking OFF Auto MDI/MDI-X ports 100 Mbps 10 Mbps Port is connected without traffic Data is transferring Port is not connected https://www.peplink.com 55 Copyright @ 2021 Peplink 2.25 MAX BR1 Mini (HW2) 2.25.1 Panel Appearance 2.25.2 LED Indicators Status OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready Cellular Indicators https://www.peplink.com 56 Copyright @ 2021 Peplink Cellular OFF Blinking slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) Wi-Fi OFF Blinking slowly Blinking ON Wi-Fi Indicators Disabled intermittent Connecting to wireless network(s) Connected to wireless network(s) with traffic Connected to wireless network(s) without traffic https://www.peplink.com 57 Copyright @ 2021 Peplink 2.26 MAX BR1 Mini (HW3) 2.26.1 Panel Appearance 2.26.2 LED Indicators OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready OFF Blinking slowly Green Cellular Indicators Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) Status Cellular Wi-Fi OFF ON Wi-Fi Indicators Wi-Fi AP is turn off Wi-Fi AP is turn on https://www.peplink.com 58 Copyright @ 2021 Peplink 2.27 MAX BR1 Mini 5G 2.27.1 Panel Appearance 2.27.2 LED Indicators OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready OFF Blinking slowly Green Cellular Indicators Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) Status Cellular https://www.peplink.com 59 Copyright @ 2021 Peplink 2.28 MAX BR1 Mini Core 2.28.1 Panel Appearance 2.28.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

Status OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready Cellular Indicators Cellular OFF Blinking slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) https://www.peplink.com 60 Copyright @ 2021 Peplink 2.29 MAX BR1 Mini Core (HW3) 2.29.1 Panel Appearance 2.29.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

Status OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready Cellular Indicators Cellular OFF Blinking slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) https://www.peplink.com 61 Copyright @ 2021 Peplink 2.30 MAX BR1 Mini M2M 2.30.1 Panel Appearance 1.1.1 LED Indicators The statuses indicated by the front panel LEDs are as follows:

Status OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready Cellular Indicators Cellular OFF Blinking slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) Wi-Fi OFF ON Wi-Fi Indicators Wi-Fi AP is turn off Wi-Fi AP is turn on https://www.peplink.com 62 Copyright @ 2021 Peplink 2.31 MAX BR1 M2M 2.31.1 Panel Appearance 2.31.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

Status OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready Cellular Indicators Cellular OFF Blinking slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) https://www.peplink.com 63 Copyright @ 2021 Peplink Green LED Orange LED Port Type LAN and Ethernet WAN Ports ON OFF ON Blinking OFF Auto MDI/MDI-X ports 100 Mbps 10 Mbps Port is connected without traffic Data is transferring Port is not connected https://www.peplink.com 64 Copyright @ 2021 Peplink 2.32 MAX BR1 ENT 2.32.1 Panel Appearance 2.32.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

Status OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready Cellular Indicators Cellular OFF Blinking slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) LAN and Ethernet WAN Ports Green LED Orange LED Port Type ON Blinking OFF Auto MDI/MDI-X ports 10 / 100 / 1000 Mbps Data is transferring No data is being transferred or port is not connected https://www.peplink.com 65 Copyright @ 2021 Peplink 2.33 MAX BR1 Pro 2.33.1 Panel Appearance 2.33.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

Status OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready Cellular Indicators Cellular OFF Blinking Slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) https://www.peplink.com 66 Copyright @ 2021 Peplink LAN and Ethernet WAN Ports Green LED Orange LED Port Type ON OFF ON Blinking OFF Auto MDI/MDI-X ports 1000 Mbps 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Data is transferring No data is being transferred or port is not connected https://www.peplink.com 67 Copyright @ 2021 Peplink 2.34 MAX BR1 Pro (CAT-20) 2.34.1 Panel Appearance 2.34.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

Status OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready Cellular Indicators Cellular OFF Blinking Slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) Wi-Fi / Wi-Fi AP OFF ON Wi-Fi Indicators Disabled intermittent Connected to wireless network(s) https://www.peplink.com 68 Copyright @ 2021 Peplink Green LED Orange LED Port Type Right LED Left LED Port Type LAN Ports 1000 Mbps 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Data is transferring No data is being transferred or port is not connected ON OFF ON Blinking OFF Auto MDI/MDI-X ports WAN Port 1000 Mbps 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Data is transferring No data is being transferred or port is not connected ON OFF ON Blinking OFF Auto MDI/MDI-X ports https://www.peplink.com 69 Copyright @ 2021 Peplink 2.35 MAX BR1 Pro 5G 2.35.1 Panel Appearance 2.35.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

Status OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready Cellular Indicators Cellular OFF Blinking Slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) Wi-Fi / Wi-Fi AP OFF ON Wi-Fi Indicators Disabled intermittent Connected to wireless network(s) https://www.peplink.com 70 Copyright @ 2021 Peplink Green LED Orange LED Port Type Right LED Left LED Port Type LAN Ports 1000 Mbps 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Data is transferring No data is being transferred or port is not connected ON OFF ON Blinking OFF Auto MDI/MDI-X ports WAN Port 1000 Mbps 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Data is transferring No data is being transferred or port is not connected ON OFF ON Blinking OFF Auto MDI/MDI-X ports https://www.peplink.com 71 Copyright @ 2021 Peplink 2.36 MAX BR2 Pro 2.36.1 Panel Appearance 2.36.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

Status OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready Cellular Indicators Cellular OFF Blinking Slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) Wi-Fi / Wi-Fi AP OFF ON Wi-Fi Indicators Disabled intermittent Connected to wireless network(s) https://www.peplink.com 72 Copyright @ 2021 Peplink Green LED Orange LED Port Type Right LED Left LED Port Type LAN Ports 1000 Mbps 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Data is transferring No data is being transferred or port is not connected ON OFF ON Blinking OFF Auto MDI/MDI-X ports WAN Port 1000 Mbps 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Data is transferring No data is being transferred or port is not connected ON OFF ON Blinking OFF Auto MDI/MDI-X ports https://www.peplink.com 73 Copyright @ 2021 Peplink 2.37 MAX Hotspot 2.37.1 Panel Appearance 2.37.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

LAN and Ethernet WAN Ports Green LED Orange LED Port Type ON OFF ON Blinking OFF Auto MDI/MDI-X ports 1000 Mbps 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Data is transferring No data is being transferred or port is not connected https://www.peplink.com 74 Copyright @ 2021 Peplink 2.38 MAX BR1 IP55 2.38.1 Panel Appearance 2.38.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready LAN and Ethernet WAN Ports 1000Mbps ON OFF ON Blinking OFF Auto MDI/MDI-X ports 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Data is transferring Port is not connected Status Green LED Orange LED Port Type https://www.peplink.com 75 Copyright @ 2021 Peplink Cellular OFF Blinking Green Green OFF Cellular Indicators Disabled or no SIM card inserted Connecting to network(s) in Standby Mode Connected to network(s) in Priority 1 (Active) LAN and WAN Indicators Powered-on device connected to Ethernet port No device connected to Ethernet port https://www.peplink.com 76 Copyright @ 2021 Peplink 2.39 MAX BR2 IP55 2.39.1 Panel Appearance 2.39.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

Status Wi-Fi OFF Red Blinking red Green Status Indicators System initializing Booting up or busy Boot up error Ready OFF Blinking slowly Blinking ON Wi-Fi Indicators Disabled Intermittent Connecting to wireless network(s) Connected to wireless network(s) with traffic Connected to wireless network(s) without traffic Cellular Indicators Cellular OFF ON Disabled or no SIM card inserted Connecting or connected to network(s) https://www.peplink.com 77 Copyright @ 2021 Peplink Green LED Orange LED Port Type LAN and Ethernet WAN Ports 1000Mbps ON OFF ON Blinking OFF Auto MDI/MDI-X ports 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Data is transferring Port is not connected 2.40 MAX BR1 IP67 2.40.1 Panel Appearance https://www.peplink.com 78 Copyright @ 2021 Peplink 2.41 MAX On-The-Go 2.41.1 Panel Appearance 2.41.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

WAN Wi-Fi Status OFF Green OFF Green OFF Red Green Cellular Indicators Modem is not attached to the port Modem is attached to the port Wi-Fi Indicators Disconnected from AP Connected to AP Status Indicators System initializing Booting up or busy Ready LAN and Ethernet WAN Ports Green LED Orange LED Port Type ON OFF ON Blinking Auto MDI/MDI-X ports 100 Mbps 10 Mbps Port is connected without traffic Data is transferring https://www.peplink.com 79 Copyright @ 2021 Peplink 2.42 BR2 Micro 2.42.1 Panel Appearance 2.42.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

Status OFF Red Blinking red Green Status Indicator System initializing/power off Booting up or busy Boot up error Ready https://www.peplink.com 80 Copyright @ 2021 Peplink 2.43 UBR LTE 2.43.1 Panel Appearance 2.43.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

Status OFF Red Blinking Red Green Status Indicators System initializing Booting up or busy Boot up error Ready LAN and Ethernet WAN Ports Green LED Orange LED Port Type ON OFF ON Blinking OFF Auto MDI/MDI-X ports 1000 Mbps 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Data is transferring No data is being transferred or port is not connected https://www.peplink.com 81 Copyright @ 2021 Peplink Cellular Indicators Cellular OFF Blinking Slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) https://www.peplink.com 82 Copyright @ 2021 Peplink

2.44 UBR Plus 2.44.1 Panel Appearance 2.44.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

Status OFF Red Blinking Red Green Status Indicators System initializing Booting up or busy Boot up error Ready LAN and Ethernet WAN Ports Green LED Orange LED Port Type ON OFF ON Blinking OFF Auto MDI/MDI-X ports 1000 Mbps 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Data is transferring No data is being transferred or port is not connected https://www.peplink.com 83 Copyright @ 2021 Peplink Cellular Indicators Cellular OFF Blinking Slowly Green Disabled or no SIM card inserted Connecting to network(s) Connected to network(s) 2.45 PDX 2.45.1 Panel Appearance 2.45.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:

Status OFF Red Blinking red Green Status Indicators No battery installed Charging Low Battery Full Charged https://www.peplink.com 84 Copyright @ 2021 Peplink 3 Installation For details on connecting Pepwave routers to your network, please see this link. 4 Mounting the Unit Please refer to this link. 5 Connecting to the Web Admin Interface 1. Start a web browser on a computer that is connected with the Pepwave router through the LAN. 2. To connect to the routers web admin interface, enter the following LAN IP address in the address field of the web browser:

http://192.168.50.1

(This is the default LAN IP address for Pepwave routers.) 3. Enter the following to access the web admin interface. Username: admin Password: admin

(This is the default username and password for Pepwave routers). You must change the default password on the first successful logon. Password requirements are: A minimum of 10 lower AND upper case characters, including at least 1 number. When HTTP is selected, the URL will be redirected to HTTPS by default. https://www.peplink.com 85 Copyright @ 2021 Peplink After successful login, the Dashboard of the web admin interface will be displayed. The Dashboard shows current WAN, LAN, and Wi-Fi AP statuses. Here, you can change WAN connection priority and switch on/off the Wi-Fi AP. For further information on setting up these connections, please refer to Sections 8 and 9. https://www.peplink.com 86 Copyright @ 2021 Peplink Device Information displays details about the device, including model name, firmware version, and uptime. For further information, please refer to Section 22. Configuration changes (e.g. WAN, LAN, admin settings, etc.) will take effect only after clicking the Save button at the bottom of each page. The Apply Changes button causes the changes to be saved and applied. Important Note 6 7 8 9 AP Please refer to this link. System Please refer to this link. Status Please refer to this link. Ignition Sensing Please refer to this link for the details of Ignition Sensing. https://www.peplink.com 87 Copyright @ 2021 Peplink Appendix A: Restoration of Factory Defaults Please refer to this link. Appendix B: FusionSIM Manual Please refer to this link. Appendix C: Ports usage overview Default Port Number UDP 5246 TCP 443 TCP 5246 TCP 5246 TCP 4500 Usage Data flow HTTPS service Optional, used when TCP 443 is not responding Remote Web Admin VPN Data (TCP Mode) TCP 32015 VPN handshake UDP 4500 VPN Data UDP 32015 VPN Data (alternative) TCP/UDP 4500+N-1^

UDP 32015+N-1^

UDP 4500 UDP 500 UDP 500 UDP 1701 UDP 4500 VPN Sub-Tunnels Data VPN Sub-Tunnels Data

(alternative) VPN Data VPN initiation L2TP L2TP L2TP Default Status Enabled Enabled Enabled Enabled Service InControl InControl Inbound/Outbound Outbound Outbound InControl InControl Virtual Appliance SpeedFusion VPN /

SpeedFusion SpeedFusion VPN /

SpeedFusion SpeedFusion VPN /

SpeedFusion SpeedFusion VPN /

SpeedFusion SpeedFusion VPN /

SpeedFusion SpeedFusion VPN /

SpeedFusion IPsec IPsec Remote User Access Remote User Access Remote User Outbound Outbound Inbound / Outbound*

Disabled Inbound / Outbound*

Disabled Inbound / Outbound*

Disabled Inbound / Outbound*

Disabled Inbound / Outbound*

Disabled Inbound / Outbound*

Disabled Inbound / Outbound*

Inbound / Outbound*

Disabled Disabled Inbound Inbound Inbound Disabled Disabled Disabled https://www.peplink.com 88 Copyright @ 2021 Peplink Inbound Inbound Outbound Access Remote User Access Remote User Access Peplink Troubleshooting Assistance Web Admin Interface access Web Admin Interface access

(secure) SSH SNMP monitoring SNMP monitoring Outbound Outbound Radius Radius Outbound Inbound Outbound Inbound Inbound Inbound Inbound NTP GPS Outbound UDP 1194 OpenVPN IP 47 PPTP (GRE) TCP 2222 Remote Assistance Direct connection TCP 80 HTTP traffic HTTPS traffic SSH SNMP Get SNMP Trap TCP 443 TCP 8822 UDP 161 UDP 162 TCP, UDP 1812 Radius Authentication TCP, UDP 1813 Radius Accounting UDP 123 TCP 60660 Network Time Protocol Real-time location data in NMEA format Disclaimer:

Disabled Disabled Enabled Enabled Enabled Disabled Disabled Disabled Disabled Disabled Disabled Enabled Disabled By default, only TCP 32015 and UDP 4500 are needed for SpeedFusion VPN / SpeedFusion. Inbound / Outbound* - Inbound = For Server mode; Outbound = For Client mode UDP 32015 - If IPsec VPN or L2TP/IPsec RUA is enabled, the UDP 4500 is occupied, so SpeedFusion VPN / SpeedFusion will automatically switch to UPD 32015 as VPN data port . UDP 32015+N-1^ / TCP/UDP 4500+N-1^ - When using Sub-Tunnels, multiple ports are in use (1 for each Sub-Tunnel profile). The default UDP data ports used when using (N number of Sub-Tunnel profiles) are:

45004500+N-1, or (when port 4500 is in use by IPsec or L2TP/IPsec) 32015 32015+N-1". https://www.peplink.com 89 Copyright @ 2021 Peplink Appendix D: Declaration FCC Requirements for Operation in the United States Federal Communications Commission (FCC) Compliance Notice:

For MAX BR1 Mini to part 15 of This equipment has been tested and found to comply with the limits for a Class A digital device, the FCC Rules. These limits are designed to provide reasonable pursuant protection against harmful is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. interference when the equipment FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11. FCC Radiation Exposure Statement (for MAX BR1 mini) This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. https://www.peplink.com 90 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX BR1 Mini for EC25-E) https://www.peplink.com 91 Copyright @ 2021 Peplink https://www.peplink.com 92 Copyright @ 2021 Peplink 2.4GHz ( 2412 2472 MHz ) : 16.38 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. contact as: https://www.peplink.com/

https://www.peplink.com 93 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX BR1 Mini for MC7455) https://www.peplink.com 94 Copyright @ 2021 Peplink https://www.peplink.com 95 Copyright @ 2021 Peplink 2.4GHz ( 2412 2472 MHz ) : 16.38 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. contact as: https://www.peplink.com/

https://www.peplink.com 96 Copyright @ 2021 Peplink Industry Canada Statement (for MAX BR1 Mini) This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisee aux deux conditions suivantes (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme si susceptible d'en compromettre le fonctionnement. le brouillage est This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Le prsent produit est conforme aux spcifications techniques applicables d'Innovation, Sciences et Dveloppement conomique Canada. This device complies with the ISED radiation exposure limit set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator & your body. Cet quipement est conforme avec l'exposition aux radiations ISED dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis une distance minimum de 20 cm entre le radiateur et votre corps. https://www.peplink.com 97 Copyright @ 2021 Peplink FCC & IC Requirements for Operation in the United States and Canada (for MAX BR1 Mini) FCC ID : U8G-P1930LITER6 FCC 15.21: The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF exposure warning: This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. to part 15 of This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant the FCC Rules. These limits are designed to provide reasonable protection against harmful is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. interference when the equipment IC Warning:

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions 1. This device may not cause interference. 2. This device must accept any interference, undesired operation of the device. including interference that may cause Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisee aux deux conditions suivantes 1. 2. l'appareil ne doit pas produire de brouillage, et l'utilisateur de l'appareil doit accepter tout brouillage radioelect rique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement. https://www.peplink.com 98 Copyright @ 2021 Peplink Informations concernant l'exposition aux frequences radio (RF) Cet equipement est conforme avec l'exposition aux radiations IC definies pour un environnement noncontrole. Cet equipement doit etre installe et utilise a une distance minimum de 20 cm entre le radiateuret votre corps. Cet emetteur ne doit pas etre co-localisees ou operant en conjonction avec une autreantenne ou transmetteur. Les utilisateurs finaux et les installateurs doivent etre informes des instructions d'installation de l'antenne et des conditions de fonctionnement de l'emetteur afin de satisfaire a la conformite d'exposition RF. This radio transmitter IC 20682-P1930LITER6 has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Le present emetteur radio 20682-P1930LITER6 a ete approuve par Innovation, Sciences et Developpement economique Canada pour fonctionner avec les types d'antenne enumeres ci dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est superieur au gain maximal indique pour tout type figurant sur la liste, sont strictement interdits pour l'exploitation de l'emetteur. antenna type Omni-directional antenna gain 5.33 https://www.peplink.com 99 Copyright @ 2021 Peplink FCC Requirements for Operation in the United States Federal Communications Commission (FCC) Compliance Notice:

For MAX BR1 MK2 to part 15 of This equipment has been tested and found to comply with the limits for a Class A digital device, the FCC Rules. These limits are designed to provide reasonable pursuant protection against harmful is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. interference when the equipment Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 24cm between the radiator & your body. Industry Canada Statement (For MAX BR1 MK2) This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Le prsent produit est conforme aux spcifications techniques applicables d'Innovation, Sciences et Dveloppement conomique Canada. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio https://www.peplink.com 100 Copyright @ 2021 Peplink exempts de licence. L'exploitation est autorisee aux deux conditions suivantes:

(1) lappareil ne doit pas produire de brouillage, et

(2) lutilisateur de lappareil doit accepter tout brouillage radioelectrique subi, meme si brouillage est susceptible den le

(i) The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

(ii) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and The high-power radars are allocated as primary users (i.e. priority users) of the band 5725-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

(i) Le dispositif fonctionnant dans la bande 5150-5250 MHz est rserv uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

(ii) Le gain maximal dantenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer la limitation P.I.R.E spcifie pour lexploitation point point et non point point, selon le cas. En outre, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bande 5725-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Radiation Exposure Statement This device complies with the ISED radiation exposure limit set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator & your body. Cet quipement est conforme avec l'exposition aux radiations ISED dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis une distance minimum de 20 cm entre le radiateur et votre corps. https://www.peplink.com 101 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX BR1 MK2 ) https://www.peplink.com 102 Copyright @ 2021 Peplink https://www.peplink.com 103 Copyright @ 2021 Peplink 2.4GHz ( 2412 2472 MHz ) : 19.95 dBm 5GHz ( 5150 - 5250 MHz ) : 22.73 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/

https://www.peplink.com 104 Copyright @ 2021 Peplink FCC Requirements for Operation in the United States Federal Communications Commission (FCC) Compliance Notice:

For MAX BR1 Classic to part 15 of This equipment has been tested and found to comply with the limits for a Class A digital device, the FCC Rules. These limits are designed to provide reasonable pursuant protection against harmful is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. interference when the equipment Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. FCC Radiation Exposure Statement (for MAX BR1 Classic ) This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. https://www.peplink.com 105 Copyright @ 2021 Peplink Industry Canada Statement ( for MAX BR1 Classic ) This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions (1) This device may not cause interference; and(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisee aux deux conditions suivantes (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement. This device complies with the ISED radiation exposure limit set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator & your body. Cet quipement est conforme avec l'exposition aux radiations ISED dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis une distance minimum de 20 cm entre le radiateur et votre corps. This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Le prsent produit est conforme aux spcifications techniques applicables d'Innovation, Sciences et Dveloppement conomique Canada. https://www.peplink.com 106 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX BR1 Classic for MC7455) https://www.peplink.com 107 Copyright @ 2021 Peplink https://www.peplink.com 108 Copyright @ 2021 Peplink 2.4GHz ( 2412 2472 MHz ) : 19.78 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. contact as: https://www.peplink.com/

https://www.peplink.com 109 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX BR1 Classic for EC25-E) https://www.peplink.com 110 Copyright @ 2021 Peplink https://www.peplink.com 111 Copyright @ 2021 Peplink 2.4GHz ( 2412 2472 MHz ) : 19.78 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. contact as: https://www.peplink.com/

https://www.peplink.com 112 Copyright @ 2021 Peplink FCC Requirements for Operation in the United States Federal Communications Commission (FCC) Compliance Notice:

For MAX HD4 MBX, MAX HD2 MBX, MAX HD4 MBX 5G, MAX HD2 MBX 5G to part 15 of This equipment has been tested and found to comply with the limits for a Class A digital device, the FCC Rules. These limits are designed to provide reasonable pursuant protection against harmful is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. interference when the equipment IMPORTANT NOTE FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. ISED Warning Statement For MAX HD4 MBX Industry Canada Statement This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions (1) This device may not cause interference; and(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisee aux deux conditions suivantes (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement. This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. https://www.peplink.com 113 Copyright @ 2021 Peplink Le prsent produit est conforme aux spcifications techniques applicables d'Innovation, Sciences et Dveloppement conomique Canada.

(i) The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

(ii) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and The high-power radars are allocated as primary users (i.e. priority users) of the band 5725-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

(i) Le dispositif fonctionnant dans la bande 5150-5250 MHz est rserv uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

(ii) Le gain maximal dantenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer la limitation P.I.R.E spcifie pour lexploitation point point et non point point, selon le cas. En outre, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bande 5725-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. IC Radiation Exposure Statement This equipment complies with Innovation, Science and Economic Development Canada RF exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated to ensure a minimum of 20 cm spacing to any person at all times. Declaration d'exposition aux radiations Cet equipement est conforme aux limites d'exposition aux rayonnements IC etablies pour un environnement non controle. Cet equipement doit etre installe et utilise avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This radio transmitter 20682-P1MBX has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. WIFI Antenna type Replacement Antenna WIFI Antenna gain 2.4GHz / 2.44 dBi , 5GH / 4.73 dBi LTE Antenna type Replacement Antenna LTE Antenna gain 4.38 dBi https://www.peplink.com 114 Copyright @ 2021 Peplink Battery Caution Statement (MAX HD4 MBX, MAX HD2 MBX, MAX HD4 MBX 5G, MAX HD2 MBX 5G) Risk of explosion if the battery replaced by an incorrect type, place the battery into fire, a hot oven, extremely high temperature or low air pressure surrounding environment, the leakage of flammable liquid or gas, and mechanically crushing or cutting of the battery. https://www.peplink.com 115 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX HD4 MBX For EM7565 ) https://www.peplink.com 116 Copyright @ 2021 Peplink https://www.peplink.com 117 Copyright @ 2021 Peplink 2.4GHz ( 2412 2472 MHz ) : 19.6 dBm 5GHz ( 5150 - 5250 MHz ) : 19.4 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/

https://www.peplink.com 118 Copyright @ 2021 Peplink UK Statement for Pepwave Routers ( MAX HD4 MBX For EM7565 ) https://www.peplink.com 119 Copyright @ 2021 Peplink https://www.peplink.com 120 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX HD2 MBX / MAX HD4 MBX For LM960A18) https://www.peplink.com 121 Copyright @ 2021 Peplink https://www.peplink.com 122 Copyright @ 2021 Peplink 2.4GHz ( 2412 2472 MHz ) : 19.6 dBm 5GHz ( 5150 - 5250 MHz ) : 19.4 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/

https://www.peplink.com 123 Copyright @ 2021 Peplink UK Statement for Pepwave Routers ( MAX HD2 MBX / MAX HD4 MBX For LM960A18) https://www.peplink.com 124 Copyright @ 2021 Peplink https://www.peplink.com 125 Copyright @ 2021 Peplink CE Statement for Pepwave Routers (MAX HD2 MBX 5G / MAX HD4 MBX 5G For MV31-W) https://www.peplink.com 126 Copyright @ 2021 Peplink https://www.peplink.com 127 Copyright @ 2021 Peplink 2.4GHz ( 2412 2472 MHz ) : 19.6 dBm 5GHz ( 5150 - 5250 MHz ) : 19.4 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) forth for an uncontrolled This equipment complies with CE radiation exposure limits set environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. https://www.peplink.com 128 Copyright @ 2021 Peplink This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/

https://www.peplink.com 129 Copyright @ 2021 Peplink UK Statement for Pepwave Routers (MAX HD2 MBX 5G / MAX HD4 MBX 5G For MV31-W) https://www.peplink.com 130 Copyright @ 2021 Peplink https://www.peplink.com 131 Copyright @ 2021 Peplink FCC Requirements for Operation in the United States Federal Communications Commission (FCC) Compliance Notice:

For MAX HD2 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 50 centimeters between the radiator and your body. Industry Canada Statement (MAX HD2) This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Le prsent produit est conforme aux spcifications techniques applicables d'Innovation, Sciences et Dveloppement conomique Canada. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisee aux deux conditions suivantes:

(1) lappareil ne doit pas produire de brouillage, et

(2) lutilisateur de lappareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible den https://www.peplink.com 132 Copyright @ 2021 Peplink

(i) The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

(ii) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and The high-power radars are allocated as primary users (i.e. priority users) of the band 5725-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

(i) Le dispositif fonctionnant dans la bande 5150-5250 MHz est rserv uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

(ii) Le gain maximal dantenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer la limitation P.I.R.E spcifie pour lexploitation point point et non point point, selon le cas. En outre, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bande 5725-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Radiation Exposure Statement This device complies with the ISED radiation exposure limit set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 37cm between the radiator & your body. 70 cm minimum distance for the device operate with plug-in USB cellular device which has maximum of 7W(ERP) output power. Cet quipement est conforme avec l'exposition aux radiations ISED dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis une distance minimum de 37 cm entre le radiateur et votre corps. Distance minimale de 70 cm pour que l'appareil fonctionne avec un appareil cellulaire USB enfichable qui a une puissance de sortie maximale de 7 W (ERP). Battery Caution Statement Risk of explosion if the battery replaced by an incorrect type, place the battery into fire, a hot oven, extremely high temperature or low air pressure surrounding environment, the leakage of flammable liquid or gas, and mechanically crushing or cutting of the battery. https://www.peplink.com 133 Copyright @ 2021 Peplink https://www.peplink.com 134 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX HD2 For MC7455) https://www.peplink.com 135 Copyright @ 2021 Peplink https://www.peplink.com 136 Copyright @ 2021 Peplink 2.4GHz ( 2412 2472 MHz ) : 19.90 dBm 5GHz ( 5150 - 5250 MHz ) : 22.88 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/

https://www.peplink.com 137 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX HD2 For EM7565) https://www.peplink.com 138 Copyright @ 2021 Peplink https://www.peplink.com 139 Copyright @ 2021 Peplink 2.4GHz ( 2412 2472 MHz ) : 19.86 dBm 5GHz ( 5150 - 5250 MHz ) : 22.68 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/

https://www.peplink.com 140 Copyright @ 2021 Peplink Mounting the Unit Wall Mount Some devices can be wall mounted using screws. After adding the screw on the wall, slide in the screw hole socket as indicated below. Recommended screw specification M3.5 x 20mm, head diameter 6mm, head thickness 2.4mm. For type 1, the device requires four screws for wall mounting. For type 2, the device requires two screws for wall mounting. https://www.peplink.com 141 Copyright @ 2021 Peplink

( For MAX BR1 Classic CB IEC 62368-1 ) Output of the external power source shall complied with ES1 and ES2 requirements, output rating 10-30 Vdc, minimum 12W ( DC Jack or POE injector ), with minimum ambient temperature 65 , altitude =

5000m , and evaluated in accordance to UL/EN/IEC 60950-1 and / or UL/EN/IEC 62368-1 Ensure to connect the power cord of power adapter to a socket-outlet with earthing.

( For MAX BR1 Mini HW3 CB IEC 62368-1 ) Output of the external power source shall complied with ES1 and PS2 requirements, input rating 10-30 Vdc, maximum 18W ( DC Power Port) or 802.3at PoE, with minimum ambient temperature 65 , altitude = 5000m , and evaluated in accordance to UL/EN/IEC 60950-1 and / or UL/EN/IEC 62368-1. Ensure to connect the power cord of power adapter to a socket-outlet with earthing. The MAX BR1 Mini is investigated to IEC TR 62102 as SELV (ES1) circuits and only connected to PoE without routing to the outside plant, including campus environment. https://www.peplink.com 142 Copyright @ 2021 Peplink FCC Requirements for Operation in the United States Federal Communications Commission (FCC) Compliance Notice:

For MAX BR1 Pro 5G FCC 15.21 The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. https://www.peplink.com 143 Copyright @ 2021 Peplink Industry Canada Statement ( MAX BR1 Pro 5G ) This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisee aux deux conditions suivantes 1. l'appareil ne doit pas produire de brouillage, et 2. l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement.Informations concernant l'exposition aux frequences radio (RF) Cet equipement est conforme avec l'exposition aux radiations IC definies pour un environnement noncontrole. Cet equipement doit etre installe et utilise a une distance minimum de 23 cm entre le radiateuret votre corps. Cet emetteur ne doit pas etre co-localisees ou operant en conjonction avec une autreantenne ou transmetteur. Les utilisateurs finaux et les installateurs doivent etre informes des instructions d'installation de l'antenne et des conditions de fonctionnement de l'emetteur afin de satisfaire a la conformite d'exposition RF. This radio transmitter IC 20682-P1AX02 has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. antenna type Omni-directional antenna gain for 2.4GHz 2.44 dBi https://www.peplink.com 144 Copyright @ 2021 Peplink antenna gain for 5GHz ( 5150 ~ 5250 MHz ) 4.10 dBi antenna gain for 5GHz ( 5725 ~ 5850 MHz ) 4.73 dBi Battery Caution Statement Risk of explosion if the battery replaced by an incorrect type, place the battery into fire, a hot oven, extremely high temperature or low air pressure surrounding environment, the leakage of flammable liquid or gas, and mechanically crushing or cutting of the battery. https://www.peplink.com 145 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX BR1 Pro 5G) https://www.peplink.com 146 Copyright @ 2021 Peplink https://www.peplink.com 147 Copyright @ 2021 Peplink

2.4GHz ( 2412 2472 MHz ) : 19.74 dBm 5GHz ( 5150 - 5250 MHz ) : 22.66 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) forth for an uncontrolled This equipment complies with CE radiation exposure limits set environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/

https://www.peplink.com 148 Copyright @ 2021 Peplink UK Statement for Pepwave Routers ( MAX BR1 Pro 5G) https://www.peplink.com 149 Copyright @ 2021 Peplink https://www.peplink.com 150 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX BR1 Pro LTEA for EM7690) https://www.peplink.com 151 Copyright @ 2021 Peplink https://www.peplink.com 152 Copyright @ 2021 Peplink 2.4GHz ( 2412 2472 MHz ) : 19.74 dBm 5GHz ( 5150 - 5250 MHz ) : 22.66 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/

https://www.peplink.com 153 Copyright @ 2021 Peplink UK Statement for Pepwave Routers ( MAX BR1 Pro LTEA for EM7690) https://www.peplink.com 154 Copyright @ 2021 Peplink https://www.peplink.com 155 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX BR1 Pro 5G for RM520N-GL) https://www.peplink.com 156 Copyright @ 2021 Peplink https://www.peplink.com 157 Copyright @ 2021 Peplink 2.4GHz ( 2412 2472 MHz ) : 19.74 dBm 5GHz ( 5150 - 5250 MHz ) : 22.66 dBm WWAN : Refer Module EU-TYPE EXAMINATION Certificate ( UE Power class ) LTE Band 1/3/7/8/20/28/38/40: 25 dBm 5G NR:

n40: 25dBm n77/n78 (class 2): 28dBm This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/

https://www.peplink.com 158 Copyright @ 2021 Peplink UK Statement for Pepwave Routers ( MAX BR1 Pro 5G for RM520N-GL) https://www.peplink.com 159 Copyright @ 2021 Peplink https://www.peplink.com 160 Copyright @ 2021 Peplink FCC Requirements for Operation in the United States Federal Communications Commission (FCC) Compliance Notice:

For MAX BR1 Mini Core This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference and

(2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Industry Canada Statement ( MAX BR1 Mini Core ) This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Le present produit est conforme aux specifications techniques applicables a l'innovation, Science et Developpement economique Canada. https://www.peplink.com 161 Copyright @ 2021 Peplink This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisee aux deux conditions suivantes:

(1) lappareil ne doit pas produire de brouillage, et

(2) lutilisateur de lappareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible den Radiation Exposure Statement This device complies with the ISED radiation exposure limit set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator & your body. Cet quipement est conforme avec l'exposition aux radiations ISED dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis une distance minimum de 20 cm entre le radiateur et votre corps. https://www.peplink.com 162 Copyright @ 2021 Peplink FCC Requirements for Operation in the United States Federal Communications Commission (FCC) Compliance Notice:

For MAX BR1 Mini HW3 (FCC ID: U8G-P1MT01) Federal Communication Commission Interference Statement Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference and

(2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Industry Canada Statement (MAX BR1 Mini, IC: 20682-P1MT01) This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Le prsent produit est conforme aux spcifications techniques applicables d'Innovation, Sciences et Dveloppement conomique Canada. https://www.peplink.com 163 Copyright @ 2021 Peplink This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio ex-empts de licence. L'exploitation est autorisee aux deux conditions suivantes:

(1) lappareil ne doit pas produire de brouillage, et

(2) lutilisateur de lappareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible den

(i) The device for operation in the band 51505250 MHz is only for indoor use to reduce the potent for harmful interference to co-channel mobile satellite systems;

(ii) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate; (detachable antenna only) ; and The high-power radars are allocated as primary users (i.e. priority users) of the band 5725-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

(iii) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate.

(i) Le dispositif fonctionnant dans la bande 5150-5250 MHz est rserv uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

(ii)Le gain maximal dantenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer la limitation P.I.R.E spcifie pour lexploitation point point et non point point, selon le cas. En outre, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5725-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.

(iii) Le gain maximal dantenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer la limitation P.I.R.E spcifie pour lexploitation https://www.peplink.com 164 Copyright @ 2021 Peplink point point et non point point. Radiation Exposure Statement This equipment complies with ISED RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Cet appareil doit tre install et utilis avec une distance minimale de 20cm entre lmetteuret votre corps. Cet appareil et sa ou ses antennes ne doivent pas tre co-localiss ou fonctionner en conjonction avec tout autre antenne ou transmetteur. This radio transmitter IC: 20682-P1MT01 has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. WIFI Antenna type: Omni-directional WIFI Antenna gain: 2.4GHz / 3.15 dBi 5150 ~ 5250 MHz / 3.29 dBi 5725 ~ 5850 MHz / 4.76 dBi Cet metteur radio IC : 20682-P1MT01 a t approuv par Innovation, Sciences et Dveloppement conomique Canada pour fonctionner avec les types d'antennes rpertoris ci-dessous, avec le gain maximal autoris indiqu. Les types d'antenne non inclus dans cette liste qui ont un gain suprieur au gain maximum indiqu pour tout type rpertori sont strictement interdits pour une utilisation avec cet appareil. Type d'antenne WIFI : omnidirectionnelle Gain de l'antenne Wi-Fi : 2.4 GHz / 3.15 dBi 5150 ~ 5250 MHz / 3.29 dBi 5725 ~ 5850 MHz / 4.76 dBi VCCI Class A Statement VCCI-A https://www.peplink.com 165 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX BR1 Mini HW3 for EC25-E & LN920A6-WW ) https://www.peplink.com 166 Copyright @ 2021 Peplink https://www.peplink.com 167 Copyright @ 2021 Peplink 2.4GHz ( 2412 - 2472 MHz ) : 19.95 dBm 5GHz ( 5150 - 5250 MHz ) : 22.65 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) EC25-E module:

LN920A6-WW module:

This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi-

ronment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/

https://www.peplink.com 168 Copyright @ 2021 Peplink UK Statement for Pepwave Routers ( MAX BR1 Mini HW3 for EC25-E & LN920A6-WW ) https://www.peplink.com 169 Copyright @ 2021 Peplink https://www.peplink.com 170 Copyright @ 2021 Peplink NCC statement For MAX BR1 Mini (HW3) MPE: 0.9 mW/cm2: 0.118 mW/cm2 20

(FDD)

- WCDMA 2100 (Band 1) FDDLTE1920MHz -1980MHz \ 2110MHz

-2170MHz

- WCDMA 900 (Band 8) FDDLTE1885MHz -915MHz \ 930MHz -960MHz

- LTE 2100 (Band 1) FDDLTE1920MHz -1980MHz \ 2110MHz -2170MHz

- LTE 1800 (Band 3) FDDLTE1710MHz -1770MHz \ 1805MHz -1865MHz

- LTE 2600 (Band 7) FDDLTE2500MHz2570MHz \ 2620MHz2690MHz

- LTE 900 (Band 8) FDDLTE885MHz -915MHz \ 930MHz -960MHz

- LTE 700 (Band 28) FDDLTE703MHz -748MHz \ 758MHz -803MHz

(TDD)

- LTE 2600 (Band 38) TDD(2570MHz2620MHz)

- LTE 2600 (Band 41) TDD(2500MHz2690MHz) https://www.peplink.com 171 Copyright @ 2021 Peplink FCC Requirements for Operation in the United States Federal Communications Commission (FCC) Compliance Notice:

For MAX 700 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 22 centimeters between the radiator and your body. https://www.peplink.com 172 Copyright @ 2021 Peplink For MAX HD2 IP67, MAX HD2 Mini, MAX HD2 Dome, MAX HD4 IP67, MAX BR1 ENT, MAX BR1 M2M, SpeedFusion Engine Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Industry Canada Statement (MAX HD2 IP67, MAX HD2 Mini, MAX HD2 Dome, MAX HD4 IP67, MAX BR1 ENT, MAX BR1 M2M, SpeedFusion Engine) This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Le present produit est conforme aux specifications techniques applicables d'Innovation, Sciences et Developpement economique Canada. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. https://www.peplink.com 173 Copyright @ 2021 Peplink Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisee aux deux conditions suivantes:

(1) lappareil ne doit pas produire de brouillage, et

(2) lutilisateur de lappareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible den Radiation Exposure Statement This device complies with the ISED radiation exposure limit set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator & your body. Cet quipement est conforme avec l'exposition aux radiations ISED dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis une distance minimum de 20 cm entre le radiateur et votre corps. Battery Caution Statement (MAX HD2 IP67, MAX HD2 Mini, MAX HD1 Dome, MAX HD2 Dome, MAX HD4 IP67, MAX BR1 ENT) Risk of explosion if the battery replaced by an incorrect type, place the battery into fire, a hot oven, extremely high temperature or low air pressure surrounding environment, the leakage of flammable liquid or gas, and mechanically crushing or cutting of the battery. https://www.peplink.com 174 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX HD2 IP67 ) https://www.peplink.com 175 Copyright @ 2021 Peplink https://www.peplink.com 176 Copyright @ 2021 Peplink WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi-

ronment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. contact as: https://www.peplink.com/

https://www.peplink.com 177 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX HD1 Dome ) https://www.peplink.com 178 Copyright @ 2021 Peplink https://www.peplink.com 179 Copyright @ 2021 Peplink WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi-

ronment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. contact as: https://www.peplink.com/

https://www.peplink.com 180 Copyright @ 2021 Peplink UK Statement for Pepwave Routers ( MAX HD1 Dome ) https://www.peplink.com 181 Copyright @ 2021 Peplink https://www.peplink.com 182 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX HD2 Dome ) https://www.peplink.com 183 Copyright @ 2021 Peplink https://www.peplink.com 184 Copyright @ 2021 Peplink WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi-

ronment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. contact as: https://www.peplink.com/

https://www.peplink.com 185 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX BR1 ESN ) https://www.peplink.com 186 Copyright @ 2021 Peplink https://www.peplink.com 187 Copyright @ 2021 Peplink 2.4GHz ( 2412 - 2472 MHz ) : 19.78 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi-

ronment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. contact as: https://www.peplink.com/

https://www.peplink.com 188 Copyright @ 2021 Peplink FCC Requirements for Operation in the United States Federal Communications Commission (FCC) Compliance Notice:

For MAX HD4 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 40 centimeters between the radiator and your body. Industry Canada Statement (MAX HD4) This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Le present produit est conforme aux specifications techniques applicables d'Innovation, Sciences et Developpement economique Canada. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired opera- tion of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio ex- empts de licence. L'exploitation est autorisee aux deux conditions suivantes

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est https://www.peplink.com 189 Copyright @ 2021 Peplink susceptible d'en

(i) The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

(ii) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and The high-power radars are allocated as primary users (i.e. priority users) of the band 5725-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

(i) Le dispositif fonctionnant dans la bande 5150-5250 MHz est reserve uniquement pour une utilisation a l'interieur afin de reduire les risques de brouillage prejudiciable aux systemes de satellites mobiles utilisant les memes canaux;

(ii) Le gain maximal d'antenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer a la limitation P.I.R.E specifiee pour l'exploitation point a point et non point a point, selon le cas. En outre, les utilisateurs devraient aussi etre avises que les utilisateurs de radars de haute puissance sont designes utilisateurs principaux (c.-a-d., qu'ils ont la priorite) pour les bande 5725-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Radiation Exposure Statement This device complies with the ISED radiation exposure limit set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 40cm between the radiator & your body. Cet equipement est conforme avec l'exposition aux radiations ISED definies pour un environnement non controle. Cet equipement doit etre installe et utilise a une distance minimum de 40 cm entre le radiateur et votre corps. Battery Caution Statement (MAX HD4) Risk of explosion if the battery replaced by an incorrect type, place the battery into fire, a hot oven, extremely high temperature or low air pressure surrounding environment, the leakage of flammable liquid or gas, and mechanically crushing or cutting of the battery. VCCI Class A Statement (MAX HD4) VCCI-A https://www.peplink.com 190 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX HD4 ) https://www.peplink.com 191 Copyright @ 2021 Peplink https://www.peplink.com 192 Copyright @ 2021 Peplink 2.4GHz ( 2412 - 2472 MHz ) : 18.87 dBm 5GHz ( 5150 - 5250 MHz & 5725 - 5850 MHz ) : 19.13 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi-

ronment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/

https://www.peplink.com 193 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX HD4 IP67 ) https://www.peplink.com 194 Copyright @ 2021 Peplink https://www.peplink.com 195 Copyright @ 2021 Peplink WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi-

ronment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. contact as: https://www.peplink.com/

https://www.peplink.com 196 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( SpeedFusion Engine ) https://www.peplink.com 197 Copyright @ 2021 Peplink https://www.peplink.com 198 Copyright @ 2021 Peplink WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) MC7455 module:

EC25-E module:

This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi-

ronment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. contact as: https://www.peplink.com/

https://www.peplink.com 199 Copyright @ 2021 Peplink FCC Requirements for Operation in the United States Federal Communications Commission (FCC) Compliance Notice:

For MAX Transit, MAX Transit Duo Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 24 centimeters between the radiator and your body. Industry Canada Statement (MAX Transit, MAX Transit Duo) This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Le present produit est conforme aux specifications techniques applicables d'Innovation, Sciences et Dveloppement conomique Canada. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired opera- tion of the device. https://www.peplink.com 200 Copyright @ 2021 Peplink Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio ex- empts de licence. L'exploitation est autorisee aux deux conditions suivantes:

(1) lappareil ne doit pas produire de brouillage, et

(2) lutilisateur de lappareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible den

(i) The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

(ii) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and The high-power radars are allocated as primary users (i.e. priority users) of the band 5725-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

(i) Le dispositif fonctionnant dans la bande 5150-5250 MHz est reserve uniquement pour une utilisation a l'interieur afin de reduire les risques de brouillage prejudiciable aux systemes de satellites mobiles utilisant les memes canaux;

(ii) Le gain maximal d'antenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer a la limitation P.I.R.E specifiee pour l'exploitation point a point et non point a point, selon le cas. En outre, les utilisateurs devraient aussi etre avises que les utilisateurs de radars de haute puissance sont designes utilisateurs principaux (c.-a-d., qu'ils ont la priorite) pour les bande 5725-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Radiation Exposure Statement This device complies with the ISED radiation exposure limit set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 30cm between the radiator & your body. Cet equipement est conforme avec l'exposition aux radiations ISED definies pour un environnement non controle. Cet equipement doit etre installe et utilise a une distance minimum de 30 cm entre le radiateur et votre corps. Battery Caution Statement Risk of explosion if the battery replaced by an incorrect type, place the battery into fire, a hot oven, extremely high temperature or low air pressure surrounding environment, the leakage of flammable liquid or gas, and mechanically crushing or cutting of the battery. https://www.peplink.com 201 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX Transit / MAX Transit Duo For EM7565 ) https://www.peplink.com 202 Copyright @ 2021 Peplink https://www.peplink.com 203 Copyright @ 2021 Peplink 2.4GHz ( 2412 - 2472 MHz ) : 18.68 dBm 5GHz ( 5150 - 5250 MHz ) : 18.19 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi-

ronment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/

https://www.peplink.com 204 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX Transit For LM960A18 ) https://www.peplink.com 205 Copyright @ 2021 Peplink https://www.peplink.com 206 Copyright @ 2021 Peplink 2.4GHz ( 2412 - 2472 MHz ) : 18.68 dBm 5GHz ( 5150 - 5250 MHz ) : 18.19 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi-

ronment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/

https://www.peplink.com 207 Copyright @ 2021 Peplink FCC Requirements for Operation in the United States Federal Communications Commission (FCC) Compliance Notice:

For MAX Transit Mini Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Industry Canada Statement (MAX Transit Mini) This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Ce produit rpond aux spcifications techniques applicables l'innovation, Science et Dveloppement conomique Canada. Radiation Exposure Statement This device complies with the ISED radiation exposure limit set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator & your body. Cet quipement est conforme avec l'exposition aux radiations ISED dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis une distance minimum de 20 cm entre le radiateur et votre corps. https://www.peplink.com 208 Copyright @ 2021 Peplink This radio transmitter has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Antenna types Replacement Antenna Antenna gain (in dBi) 5.33 dBi Innovation, Sciences et Developpement economique Canada a approuve l'utilisation de ce transmetteur radio avec les types d'antenne enumeres ci-dessous, le gain maximal admissible etant indique. Les types d'antennes non inclus dans cette liste qui ont un gain superieur au gain maximal indique pour tout type liste sont strictement interdits pour une utilisation avec cet appareil. Types d'antennes Replacement Antenna Gain d'antenne (en dBi) 5.33 dBi https://www.peplink.com 209 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX Transit Mini ) https://www.peplink.com 210 Copyright @ 2021 Peplink https://www.peplink.com 211 Copyright @ 2021 Peplink 2.4GHz ( 2412 - 2472 MHz ) : 19.78 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi-

ronment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator & your body. contact as: https://www.peplink.com/

https://www.peplink.com 212 Copyright @ 2021 Peplink FCC Requirements for Operation in the United States Federal Communications Commission (FCC) Compliance Notice:

For MAX BR1 PRO, UBR LTE Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 23 centimeters between the radiator and your body. Industry Canada Statement (MAX BR1 PRO, UBR LTE) This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Le prsent produit est conforme aux spcifications techniques applicables d'Innovation, Sciences et Dveloppement conomique Canada. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired opera- tion of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio ex- empts de licence. L'exploitation est autorisee aux deux conditions suivantes:

(1) lappareil ne doit pas produire de brouillage, et

(2) lutilisateur de lappareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible den https://www.peplink.com 213 Copyright @ 2021 Peplink For licence exempt equipment with detachable antennas, the user manual shall also contain the following notice in a conspicuous location:

This radio transmitter 20682-P1941 has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. WIFI Antenna type: Replacement Antenna WIFI Antenna gain: 2.4GHz I 2.44 dBi , 5GHz I 4.73 dBi LTE Antenna type: Replacement Antenna (04-410055-00) LTE Antenna gain: 4 dBi LTE Antenna type: Replacement Antenna (04-410093-01) LTE Antenna gain: 4.38 dBi

(i) The device for operation in the band 51505250 MHz is only for indoor use to reduce the potent for harmful interference to co-channel mobile satellite systems;

(ii) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate;

(detachable antenna only) ; and The high-power radars are allocated as primary users (i.e. priority users) of the band 5725-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

(iii) where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be clearly indicated.

(i) Le dispositif fonctionnant dans la bande 5150-5250 MHz est reserve uniquement pour utilisation a l'interieur afin de reduire les risques de brouillage prejudiciable aux systemes de satellites mobiles utilisant les memes canaux;

(ii) Le gain maximal dantenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer la limitation P.I.R.E spcifie pour lexploitation point point et non point point, selon le cas. (antenne dtachable uniquement) En outre, les utilisateurs devraient aussi etre avises que les utilisateurs de radars de haute puissance sont designes utilisateurs principaux (c.-a-d., qu'ils ont la priorite) pour les bande 5725-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.

(iii) En outre, les utilisateurs devraient aussi etre avises que les utilisateurs de radars de haute puissance sont designes utilisateurs principaux (c.-a-d., qu'ils ont la priorite) pour les bande 5725-5850 MHz et https://www.peplink.com 214 Copyright @ 2021 Peplink Radiation Exposure Statement This device complies with the ISED radiation exposure limit set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 23 cm between the radiator & your body. Cet equipement est conforme avec l'exposition aux radiations ISED definies pour un environnement non controle. Cet equipement doit etre installe et utilise a une distance minimum de 23 cm entre le radiateur et votre corps. https://www.peplink.com 215 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX BR1 PRO / UBR LTE ) https://www.peplink.com 216 Copyright @ 2021 Peplink https://www.peplink.com 217 Copyright @ 2021 Peplink 2.4GHz ( 2412 - 2472 MHz ) : 19.94 dBm 5GHz ( 5150 - 5250 MHz ) : 20.34 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi-

ronment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/

https://www.peplink.com 218 Copyright @ 2021 Peplink FCC Requirements for Operation in the United States Federal Communications Commission (FCC) Compliance Notice:

For MAX BR1 IP55, MAX BR2 IP55 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. https://www.peplink.com 219 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX BR1 IP55 ) https://www.peplink.com 220 Copyright @ 2021 Peplink https://www.peplink.com 221 Copyright @ 2021 Peplink 2.4GHz ( 2412 - 2472 MHz ) : 18.16 dBm 5GHz ( 5150 - 5250 MHz) : 20.32 dBm 5GHz ( 5725 - 5850 MHz) : 13.00 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi-

ronment. This equipment should be installed and operated with a minimum distance of 50cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/

https://www.peplink.com 222 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX BR2 IP55 ) https://www.peplink.com 223 Copyright @ 2021 Peplink

https://www.peplink.com 224 Copyright @ 2021 Peplink 2.4GHz ( 2412 - 2472 MHz ) : 18.99 dBm 5GHz ( 5150 - 5250 MHz ) : 22.95 dBm 5GHz ( 5725 - 5850 MHz ) : 12.80 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi-

ronment. This equipment should be installed and operated with a minimum distance of 50cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/

https://www.peplink.com 225 Copyright @ 2021 Peplink FCC Requirements for Operation in the United States Federal Communications Commission (FCC) Compliance Notice:

For MAX Transit Pro E / MAX Transit LTEA (FCC ID: U8G-P1835) FCC 15.21:

Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. FCC 15.105 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. https://www.peplink.com 226 Copyright @ 2021 Peplink ICES Statement This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Le prsent produit est conforme aux spcifications techniques applicables d'Innovation, Sciences et Dveloppement conomique Canada. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisee aux deux conditions suivantes:

1. lappareil ne doit pas produire de brouillage, et 2. lutilisateur de lappareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible den RF exposure warning This device complies with the ISED radiation exposure limit set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet quipement est conforme avec l'exposition aux radiations ISED dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis une distance minimum de 20 cm entre le radiateur et votre corps. Cet metteur ne doit pas tre colocalises ou oprant en conjonction avec une autre antenne ou transmetteur. https://www.peplink.com 227 Copyright @ 2021 Peplink This radio transmitter IC: 20682-P1835 has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. https://www.peplink.com 228 Copyright @ 2021 Peplink Cet metteur radio IC : 20682-P1835 a t approuv par Innovation, Sciences et Dveloppement conomique Canada doit fonctionner avec les types d'antennes numrs ci-dessous, avec le gain maximal admissible indiqu. Les types d'antenne non inclus dans cette liste qui ont un gain suprieur au gain maximum indiqu pour tout type rpertori sont strictement interdits pour une utilisation avec cet appareil. https://www.peplink.com 229 Copyright @ 2021 Peplink FCC Requirements for Operation in the United States Federal Communications Commission (FCC) Compliance Notice:

For MAX Transit Pro E (FCC ID: U8G-P1AX09) Federal Communication Commission Interference Statement Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference and

(2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Industry Canada Statement (MAX Transit Pro E, IC: 20682-P1AX09) This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Le prsent produit est conforme aux spcifications techniques applicables d'Innovation, Sciences et Dveloppement conomique Canada. https://www.peplink.com 230 Copyright @ 2021 Peplink This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio ex-empts de licence. L'exploitation est autorisee aux deux conditions suivantes:

(1) lappareil ne doit pas produire de brouillage, et

(2) lutilisateur de lappareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible den

(i) The device for operation in the band 51505250 MHz is only for indoor use to reduce the potent for harmful interference to co-channel mobile satellite systems;

(ii) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate; (detachable antenna only) ; and The high-power radars are allocated as primary users (i.e. priority users) of the band 5725-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

(iii) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate.

(i) Le dispositif fonctionnant dans la bande 5150-5250 MHz est rserv uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

(ii) Le gain maximal dantenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer la limitation P.I.R.E spcifie pour lexploitation point point et non point point, selon le cas. En outre, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5725-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.

(iii) Le gain maximal dantenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer la limitation P.I.R.E spcifie pour lexploitation https://www.peplink.com 231 Copyright @ 2021 Peplink point point et non point point. Radiation Exposure Statement This equipment complies with ISED RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Cet appareil doit tre install et utilis avec une distance minimale de 20cm entre lmetteuret votre corps. Cet appareil et sa ou ses antennes ne doivent pas tre co-localiss ou fonctionner en conjonction avec tout autre antenne ou transmetteur. This radio transmitter IC: 20682-P1AX09 has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. WIFI Antenna type: Omni-directional WIFI Antenna gain: 2.4GHz / 2.44 dBi 5150 ~ 5250 MHz / 4.10 dBi 5725 ~ 5850 MHz / 4.73 dBi Cet metteur radio IC : 20682-P1AX09 a t approuv par Innovation, Sciences et Dveloppement conomique Canada pour fonctionner avec les types d'antennes rpertoris ci-dessous, avec le gain maximal autoris indiqu. Les types d'antenne non inclus dans cette liste qui ont un gain suprieur au gain maximum indiqu pour tout type rpertori sont strictement interdits pour une utilisation avec cet appareil. Type d'antenne WIFI : omnidirectionnelle Gain de l'antenne Wi-Fi : 2.4 GHz / 2.44 dBi 5150 ~ 5250 MHz / 4.10 dBi 5725 ~ 5850 MHz / 4.73 dBi https://www.peplink.com 232 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX Transit Pro E for LN920A12-WW) https://www.peplink.com 233 Copyright @ 2021 Peplink https://www.peplink.com 234 Copyright @ 2021 Peplink 2.4GHz ( 2412 - 2472 MHz ) : 19.97 dBm 5GHz ( 5150 - 5250 MHz ) : 22.99 dBm LN920A12-WW: WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi-

ronment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/

https://www.peplink.com 235 Copyright @ 2021 Peplink FCC Requirements for Operation in the United States Federal Communications Commission (FCC) Compliance Notice:

For MAX Transit Duo Pro Federal Communication Commission Interference Statement Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference and

(2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Industry Canada Statement (MAX Transit Duo Pro) This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Le prsent produit est conforme aux spcifications techniques applicables d'Innovation, Sciences et Dveloppement conomique Canada. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, https://www.peplink.com 236 Copyright @ 2021 Peplink Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio ex-empts de licence. L'exploitation est autorisee aux deux conditions suivantes:

(1) lappareil ne doit pas produire de brouillage, et

(2) lutilisateur de lappareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible den

(i) The device for operation in the band 51505250 MHz is only for indoor use to reduce the potent for harmful interference to co-channel mobile satellite systems;

(ii) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate; (detachable antenna only) ; and The high-power radars are allocated as primary users (i.e. priority users) of the band 5725-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

(iii) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate.

(i) Le dispositif fonctionnant dans la bande 5150-5250 MHz est rserv uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

(ii) Le gain maximal dantenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer la limitation P.I.R.E spcifie pour lexploitation point point et non point point, selon le cas. En outre, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5725-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.

(iii) Le gain maximal dantenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer la limitation P.I.R.E spcifie pour lexploitation https://www.peplink.com 237 Copyright @ 2021 Peplink point point et non point point. Radiation Exposure Statement This equipment complies with ISED RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Cet appareil doit tre install et utilis avec une distance minimale de 20cm entre lmetteuret votre corps. Cet appareil et sa ou ses antennes ne doivent pas tre co-localiss ou fonctionner en conjonction avec tout autre antenne ou transmetteur. This radio transmitter IC: 20682-P1AX11 has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. WIFI Antenna type: Omni-directional WIFI Antenna gain: 2.4GHz / 2.44 dBi 5150 ~ 5250 MHz / 4.1 dBi 5725 ~ 5850 MHz / 4.73 dBi Cet metteur radio IC : 20682-P1AX11 a t approuv par Innovation, Sciences et Dveloppement conomique Canada pour fonctionner avec les types d'antennes rpertoris ci-dessous, avec le gain maximal autoris indiqu. Les types d'antenne non inclus dans cette liste qui ont un gain suprieur au gain maximum indiqu pour tout type rpertori sont strictement interdits pour une utilisation avec cet appareil. Type d'antenne WIFI : omnidirectionnelle Gain de l'antenne Wi-Fi : 2.4 GHz / 2.44 dBi 5150 ~ 5250 MHz / 4.1 dBi 5725 ~ 5850 MHz / 4.73 dBi VCCI Class A Statement VCCI-A https://www.peplink.com 238 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX Transit Duo Pro for EM7421 & EM12-G ) https://www.peplink.com 239 Copyright @ 2021 Peplink https://www.peplink.com 240 Copyright @ 2021 Peplink 2.4GHz ( 2412 - 2472 MHz ) : 19.74 dBm 5GHz ( 5150 - 5250 MHz ) : 22.88 dBm EM7421: WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) EM12-G: WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi-

ronment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/

https://www.peplink.com 241 Copyright @ 2021 Peplink UK Statement for Pepwave Routers ( MAX Transit Duo Pro for EM7421 & EM12-G ) https://www.peplink.com 242 Copyright @ 2021 Peplink https://www.peplink.com 243 Copyright @ 2021 Peplink FCC Requirements for Operation in the United States Federal Communications Commission (FCC) Compliance Notice:

For MAX BR2 Pro Federal Communication Commission Interference Statement Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference and

(2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Industry Canada Statement (MAX BR2 Pro, IC: 20682-P1AX203) This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Le prsent produit est conforme aux spcifications techniques applicables d'Innovation, Sciences et Dveloppement conomique Canada. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to https://www.peplink.com 244 Copyright @ 2021 Peplink the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio ex-empts de licence. L'exploitation est autorisee aux deux conditions suivantes:

(1) lappareil ne doit pas produire de brouillage, et

(2) lutilisateur de lappareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible den

(i) The device for operation in the band 51505250 MHz is only for indoor use to reduce the potent for harmful interference to co-channel mobile satellite systems;

(ii) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate; (detachable antenna only) ; and The high-power radars are allocated as primary users (i.e. priority users) of the band 5725-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

(iii) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate.

(i) Le dispositif fonctionnant dans la bande 5150-5250 MHz est rserv uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

(ii) Le gain maximal dantenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer la limitation P.I.R.E spcifie pour lexploitation point point et non point point, selon le cas. En outre, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5725-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.

(iii) Le gain maximal dantenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer la limitation P.I.R.E spcifie pour lexploitation https://www.peplink.com 245 Copyright @ 2021 Peplink point point et non point point. Radiation Exposure Statement This equipment complies with ISED RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Cet appareil doit tre install et utilis avec une distance minimale de 20cm entre lmetteuret votre corps. Cet appareil et sa ou ses antennes ne doivent pas tre co-localiss ou fonctionner en conjonction avec tout autre antenne ou transmetteur. This radio transmitter IC: 20682-P1AX203 has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. WIFI Antenna type: Omni-directional WIFI Antenna gain: 2.4GHz / 2.44 dBi 5150 ~ 5250 MHz / 4.1 dBi 5725 ~ 5850 MHz / 4.73 dBi Cet metteur radio IC : 20682-P1AX203 a t approuv par Innovation, Sciences et Dveloppement conomique Canada pour fonctionner avec les types d'antennes rpertoris ci-dessous, avec le gain maximal autoris indiqu. Les types d'antenne non inclus dans cette liste qui ont un gain suprieur au gain maximum indiqu pour tout type rpertori sont strictement interdits pour une utilisation avec cet appareil. Type d'antenne WIFI : omnidirectionnelle Gain de l'antenne Wi-Fi : 2.4 GHz / 2.44 dBi 5150 ~ 5250 MHz / 4.1 dBi 5725 ~ 5850 MHz / 4.73 dBi VCCI Class A Statement VCCI-A https://www.peplink.com 246 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX BR2 Pro ) https://www.peplink.com 247 Copyright @ 2021 Peplink https://www.peplink.com 248 Copyright @ 2021 Peplink 2.4GHz ( 2412 - 2472 MHz ) : 19.94 dBm 5GHz ( 5150 - 5250 MHz ) : 22.96 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi-

ronment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/

https://www.peplink.com 249 Copyright @ 2021 Peplink UK Statement for Pepwave Routers ( MAX BR2 Pro ) https://www.peplink.com 250 Copyright @ 2021 Peplink https://www.peplink.com 251 Copyright @ 2021 Peplink FCC Requirements for Operation in the United States Federal Communications Commission (FCC) Compliance Notice:

For UBR Plus Federal Communication Commission Interference Statement Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference and

(2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Industry Canada Statement (UBR Plus) This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Le prsent produit est conforme aux spcifications techniques applicables d'Innovation, Sciences et Dveloppement conomique Canada. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to https://www.peplink.com 252 Copyright @ 2021 Peplink the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio ex-empts de licence. L'exploitation est autorisee aux deux conditions suivantes:

(1) lappareil ne doit pas produire de brouillage, et

(2) lutilisateur de lappareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible den

(i) The device for operation in the band 51505250 MHz is only for indoor use to reduce the potent for harmful interference to co-channel mobile satellite systems;

(ii) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate; (detachable antenna only) ; and The high-power radars are allocated as primary users (i.e. priority users) of the band 5725-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

(iii) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate.

(i) Le dispositif fonctionnant dans la bande 5150-5250 MHz est rserv uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

(ii) Le gain maximal dantenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer la limitation P.I.R.E spcifie pour lexploitation point point et non point point, selon le cas. En outre, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5725-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.

(iii) Le gain maximal dantenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer la limitation P.I.R.E spcifie pour lexploitation https://www.peplink.com 253 Copyright @ 2021 Peplink point point et non point point. Radiation Exposure Statement This equipment complies with ISED RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Cet appareil doit tre install et utilis avec une distance minimale de 20cm entre lmetteuret votre corps. Cet appareil et sa ou ses antennes ne doivent pas tre co-localiss ou fonctionner en conjonction avec tout autre antenne ou transmetteur. This radio transmitter IC: 20682-P1AC200 has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. WIFI Antenna type: Omni-directional WIFI Antenna gain: 2.4GHz / 2.44 dBi 5150 ~ 5250 MHz / 4.1 dBi 5725 ~ 5850 MHz / 4.54 dBi Cet metteur radio IC : 20682-P1AC200 a t approuv par Innovation, Sciences et Dveloppement conomique Canada pour fonctionner avec les types d'antennes rpertoris ci-dessous, avec le gain maximal autoris indiqu. Les types d'antenne non inclus dans cette liste qui ont un gain suprieur au gain maximum indiqu pour tout type rpertori sont strictement interdits pour une utilisation avec cet appareil. Type d'antenne WIFI : omnidirectionnelle Gain de l'antenne Wi-Fi : 2.4 GHz / 2.44 dBi 5150 ~ 5250 MHz / 4.1 dBi 5725 ~ 5850 MHz / 4.54 dBi https://www.peplink.com 254 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( UBR Plus ) https://www.peplink.com 255 Copyright @ 2021 Peplink https://www.peplink.com 256 Copyright @ 2021 Peplink 2.4GHz ( 2412 - 2472 MHz ) : 19.84 dBm 5GHz ( 5150 - 5250 MHz ) : 22.76 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi-

ronment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/

https://www.peplink.com 257 Copyright @ 2021 Peplink UK Statement for Pepwave Routers ( UBR Plus ) https://www.peplink.com 258 Copyright @ 2021 Peplink https://www.peplink.com 259 Copyright @ 2021 Peplink FCC Requirements for Operation in the United States Federal Communications Commission (FCC) Compliance Notice:

For MAX HD1 Dome Pro, MAX HD2 Dome Pro (FCC ID: U8G-P1AX13) Federal Communication Commission Interference Statement Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference and

(2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Battery Caution Statement Risk of explosion if the battery replaced by an incorrect type, place the battery into fire, a hot oven, extremely high temperature or low air pressure surrounding environment, the leakage of flammable liquid or gas, and mechanically crushing or cutting of the battery. https://www.peplink.com 260 Copyright @ 2021 Peplink Industry Canada Statement (MAX HD1 Dome Pro, IC: 20682-P1AX13) This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Le prsent produit est conforme aux spcifications techniques applicables d'Innovation, Sciences et Dveloppement conomique Canada. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio ex-empts de licence. L'exploitation est autorisee aux deux conditions suivantes:

(1) lappareil ne doit pas produire de brouillage, et

(2) lutilisateur de lappareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible den

(ii) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate; (detachable antenna only) ; and The high-power radars are allocated as primary users (i.e. priority users) of the band 5725-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

(ii) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate.

(ii) Le gain maximal dantenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer la limitation P.I.R.E spcifie pour lexploitation point point et non point point, selon le cas. En outre, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5725-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. https://www.peplink.com 261 Copyright @ 2021 Peplink

(ii) Le gain maximal dantenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer la limitation P.I.R.E spcifie pour lexploitation point point et non point point. Radiation Exposure Statement This equipment complies with ISED RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Cet appareil doit tre install et utilis avec une distance minimale de 20cm entre lmetteuret votre corps. Cet appareil et sa ou ses antennes ne doivent pas tre co-localiss ou fonctionner en conjonction avec tout autre antenne ou transmetteur. This radio transmitter IC: 20682-P1AX13 has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. WIFI Antenna type: Omni-directional WIFI Antenna gain: 2.4GHz / 4.5 dBi 5725 ~ 5850 MHz / 4.7 dBi Cet metteur radio IC : 20682-P1AX13 a t approuv par Innovation, Sciences et Dveloppement conomique Canada pour fonctionner avec les types d'antennes rpertoris ci-dessous, avec le gain maximal autoris indiqu. Les types d'antenne non inclus dans cette liste qui ont un gain suprieur au gain maximum indiqu pour tout type rpertori sont strictement interdits pour une utilisation avec cet appareil. Type d'antenne WIFI : omnidirectionnelle Gain de l'antenne Wi-Fi : 2.4 GHz / 4.5 dBi 5725 ~ 5850 MHz / 4.7 dBi https://www.peplink.com 262 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX HD1 Dome Pro for MV31-W ) https://www.peplink.com 263 Copyright @ 2021 Peplink https://www.peplink.com 264 Copyright @ 2021 Peplink 2.4GHz ( 2412 - 2472 MHz ) : 19.90 dBm 5GHz ( 5150 - 5250 MHz ) : 29.84 dBm MV31-W: WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/

https://www.peplink.com 265 Copyright @ 2021 Peplink UK Statement for Pepwave Routers ( MAX HD1 Dome Pro for MV31-W ) https://www.peplink.com 266 Copyright @ 2021 Peplink https://www.peplink.com 267 Copyright @ 2021 Peplink FCC Requirements for Operation in the United States Federal Communications Commission (FCC) Compliance Notice:

For MAX MBX Mini Federal Communication Commission Interference Statement Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference and

(2) this device must accept any interference received, including interference that may cause undesired operation. Battery Caution Statement Risk of explosion if the battery replaced by an incorrect type, place the battery into fire, a hot oven, extremely high temperature or low air pressure surrounding environment, the leakage of flammable liquid or gas, and mechanically crushing or cutting of the battery. https://www.peplink.com 268 Copyright @ 2021 Peplink Industry Canada Statement (MAX MBX Mini) This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Le prsent produit est conforme aux spcifications techniques applicables d'Innovation, Sciences et Dveloppement conomique Canada. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio ex-empts de licence. L'exploitation est autorisee aux deux conditions suivantes:

(1) lappareil ne doit pas produire de brouillage, et

(2) lutilisateur de lappareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible den https://www.peplink.com 269 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( MAX MBX Mini for MV31-W ) https://www.peplink.com 270 Copyright @ 2021 Peplink https://www.peplink.com 271 Copyright @ 2021 Peplink 2.4GHz ( 2412 - 2472 MHz ) : 19.98 dBm 5GHz ( 5150 - 5250 MHz ) : 22.99 dBm MV31-W: WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/

https://www.peplink.com 272 Copyright @ 2021 Peplink UK Statement for Pepwave Routers ( MAX MBX Mini for MV31-W ) https://www.peplink.com 273 Copyright @ 2021 Peplink https://www.peplink.com 274 Copyright @ 2021 Peplink FCC Requirements for Operation in the United States Federal Communications Commission (FCC) Compliance Notice:

For BR2 Micro Federal Communication Commission Interference Statement Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference and

(2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. https://www.peplink.com 275 Copyright @ 2021 Peplink USB WAN Modem Port Specification MAX Series MAX 700 MAX HD2 /

MAX HD2 Media Fast MAX HD2 Mini MAX HD2 /

HD4 MBX MAX BR1 ENT MAX HD4 / MAX HD4 Media Fast

/ MediaFast 200 MAX BR2 Pro Output Rating 5V DC, 2A 5V DC, 2A 5V DC, 2A 5V DC, 2A 5V DC, 2A 5V DC, 2A 5V DC, 2A https://www.peplink.com 276 Copyright @ 2021 Peplink

Model: BR2 Micro Product Code:MAX-BR2-MICRO-LTE-US-PRM Serial No.:1931-B018-3232 LAN MAC:10-56-CA-DE-C6-00

: FCC ID: U8G-P1MT08 https://192.168.50.1 Password: admin } Contains FCC ID: XMR202008EC25AF XD Contains IC: 10224A-022EC25AFXD Input : 10-30V DC, 18W max (Power Port) CAN ICES-003(A) / NMB-003(A) Input : 9-20V DC, 18W max (USB Port) Made in Taiwan M8 HW1 Model: BR2 Micro PEPWAVE Product Code:MAX-BR2-MICRO-LTE-US-PRM Serial No.:1931-B018-3232 LAN MAC:10-56-CA-DE-C6-00

: FCC ID: U8G-P1MT08 https://192.168.50.1 Password: admin } Contains FCC ID: XMR202008EC25AF XD Contains IC: 10224A-022EC25AFXD Input : 10-30V DC, 18W max (Power Port) CAN ICES-003(A) / NMB-003(A) Input : 9-20V DC, 18W max (USB Port) Made in Taiwan M8 HW1

PISMO LABS TECHNOLOGY LIMITED A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong Tel: +852 2990 7600; Fax: +852 3007 0588 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Date: March 26, 2024 Subject: Request for Confidentiality FCC ID: U8G-P1MT08 To Whom It May Concern, Long Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby respectfully request confidential treatment of information accompanying this application as outlined below:

Block Diagrams Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We understand that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. _____________________ Antony Chong Director of Hardware Engineering antonyc@peplink.com

PISMO LABS TECHNOLOGY LIMITED Covered Equipment Certification Attestation Letter 3/26/2024 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: U8G-P1MT08 PISMO LABS TECHNOLOGY LIMITED (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not covered equipment. PISMO LABS TECHNOLOGY LIMITED (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Signed:

Printed name: Antony Chong Title: Director of Hardware Engineering Company Name: PISMO LABS TECHNOLOGY LIMITED Date: 3/26/2024

Certification designating a U.S. Agent for service of process:

As required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicants agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must:

i. Be signed by both the applicant and designated agent for service of process, if the agent is ii. Acknowledge the applicants consent and the designated agents obligation to accept service different from the applicant. of process. iii. Provide a physical U.S. address and email for the designated agent. iv. Acknowledge the applicants acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Unofficial information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council:

The Agent for Process of Service:

cannot be a TCB or affiliated with a TCB (e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB) cannot be a [FCC recognised] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab) Agent can be Individual Entity or a Company Entity Agent Entity must be located in US, US address/phone Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter) Agent letter does not have to be FCC ID specific, can be general Agent for Grantee For devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). NOTE: The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with the TCB. A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong PISMO LABS TECHNOLOGY LIMITED U.S. Agent Designation for Service of Process Kong ATTENTION:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: team@approve-it.net FRN #: 0027533835 This letter is to confirm that we (the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature:

Date: March 13, 2024 Signed by (Printed Name/Title): Nathan Grinager / Co-President

*This letter is valid indefinitely for all applications submitted within the period of 3/13/2024 - 3/12/2025 The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: PISMO LABS TECHNOLOGY LIMITED Grantee Code: U8G Grantee FRN: 0016347064 Contact Name: Antony Chong Street Address: A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, City/Province/Zip: Cheung Sha Wan, Hong Kong Telephone No: +852-2990-7600 Email: cert-team@peplink.com Applicant Signature:

Date: 3 / 13 / 2024 Signed by (Printed Name/Title): Antony Chong / Director of Hardware Engineering