User Manual (inside packaging) 432DOC21V1.01 CONFIDENTIAL Dog GPS Tracker (PP04) December 2021 Intro This document contains the product information necessary to support the compliance testing of PitPat Dog GPS Tracker. It should be kept condential to the fullest extent possible. Technical Description Product name:
Model number:
Brand:
Company:
Dog GPS Tracker PP04 PitPat Pitpatpet Ltd 5 Brooklands Avenue, Cambridge, CB2 8BB, UK Power Input:
2W (wireless Qi receiver) Radio:
Location:
FCC ID:
IC:
LTE-M only
(no Bluetooth) GNSS 2AGYZ-PP04 21094-PP04 The product is a Dog GPS Tracker. It measures the location of the dog using GPS and communicates this to an app using NB-IoT or LTE-M. Block Diagram 432DOC21V1.01 CONFIDENTIAL RF Exposure Information and Statement The SAR limit of USA/Canada (FCC/IC) is 1.6 W/kg averaged over one gram of tissue. Device types:
PP04 (FCC ID: 2AGYZ-PP04, IC: 21094-PP04) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use the body is 0.791W/kg. This device was tested for typical body-worn operations with the back of the handset kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with RF exposure requirements, and should be avoided. Le SAR limite pour les USA/Canada (FCC/IC) est de 1.6 W/kg moyen sur un seul gramme de tissu.La valeur maximale dclare sous ce critre lors de la certification du produit pour lutilisation du corps est de 0.791W/kgOprations typiques avec la partie arrire de la manoeuvre garde 0mm du corps, afin de maintenir la conformit avec les exigences du FCC relatives lexposition RF,Lutilisation des accessoires qui maintiennent une distance de sparation de 0mm entre le corps de lutilisateur et le dos de la main.Lutilisation des accessoires qui ne satisfont pas ces exigences peut ne pas tre conforme aux exigences du relatives lexposition la RF.Et devrait tre vit. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0mm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. Cet appareil a t test pour un fonctionnement typique du corps sous pression, pour satisfaire aux exigences relatives lexposition RF, une distance minimale de sparation de 0mm doit tre maintenue entre le corps de lutilisateur et la poigne.Y compris les antennes, les bandes de frquences et les satellites,Des accessoires similaires utiliss par cet appareil ne doivent pas contenir de composants mtalliquesSeule la fourniture ou une antenne agre.