FCC ID: YCK-CM100GLTE Blackvue Connectivity Module

CM100GLTE User Guide External Connectivity Module ENGLISH www.blackvue.com BLACKVUE CM100GLTE For manuals, customer support and FAQs go to www.blackvue.com In the box Check the box for each of the following items before installing the BlackVue device. Connectivity module SIM eject tool Cable Clips (4ea) Double-side tape User guide SIM activation guide Screw Driver Need help?

Download the manual (including FAQs) and the latest firmware from www.blackvue.com Or contact a Customer Support expert at cs@pittasoft.com CM100GLTE 3 ENGLISH At a glance The following diagram explains details of the external connectivity module. 10mm SIM slot cover 4 BLACKVUE Install and power up Install the connectivity module at top corner of the windshield. Remove any foreign matter and clean and dry the windshield before installation. y Do not install the product in a location where it can obstruct the driver's field Warning of vision. Turn off the engine. Unscrew the bolt that locks the SIM slot cover on connectivity module. Remove the cover, and unmount the SIM slot using the SIM eject tool. Insert the SIM card into the slot. CM100GLTE 5 ENGLISH Peel off the protective film from the double-sided tape and attach the connectivity module to the top corner of the windshield. Connect the front camera (USB port) and the connectivity module cable (USB). Use the pry tool to lift the edges of the windshield trim/molding and tuck in the connectivity module cable. Turn on the engine. The BlackVue dashcam and connectivity module will power up. Note y For full details on installing the dashcam on your vehicle, refer to the "Quick Start Guide" that is included in the BlackVue dashcam package. y SIM card must be activated to use LTE service. For details, refer to the SIM Activation Guide. 6 BLACKVUE Product specifications:

CM100GLTE Model Name CM100GLTE Color/Size/Weight Black / Length 90 mm x Width 60 mm x Height 10 mm / 110g LTE Module Quectel EC25 LTE Supported Band EC25-A : B2/B4/B12 EC25-J : B1/B3/B8/B18/B19/B26 EC25-E : B1/B3/B5/B7/B8/B20 LTE Features Support up to Non-CA CAT. 4 FDD Support 1.4/3/5/10/15/20MHz RF Bandwidth LTE-FDD : Max 150Mbps(DL) / Max 50Mbps(UL) LTE Transmit Power Class 3 : 23dBm +/-2dBm @ LTE-FDD Bands USIM Interface Support USIM Nano Card / 3.0V GNSS Feature Gen8C Lite of Qualcomm Protocol : NMEA 0183 Mode : GPS L1, Glonass G1, Galileo E1, Bei-dou B1 Connector Type Micro USB Type-B Connector with Harness Cable USB Interface Compliant with USB 2.0 specification(Slave Only), Reach up to 480Mbps for data transfer rate LTE Antenna Type Fixed / Intenna (Main, Diversity) GNSS Antenna Type Ceramic Patch Antenna Power Supply USB Harness Cable : 3.0m Typical Supply Voltage : 5.0V / 1A Supply Input Voltage : 3.3V ~ 5.5V / Max. Current : 2A CM100GLTE 7 ENGLISH Power Consumption Idle Mode : 30mA / Traffic Mode : 620mA @ Max. Power

(23dBm) Temperature Range Operation Temperature Range : -35C ~ +75C Storage Temperature Range : -40C ~ +85C Certifications CE, UKCA, FCC, ISED, RCM, TELEC, KC, WEEE, RoHS 8 BLACKVUE Notes This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user's authority to operate the equipment. Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. Modifications not expressly approved by the manufacturer could void your authority to operate the equipment under FCC rules. Notes Product Warranty The term of this product warranty is 1 year from the purchase date. (Accessories such as an External Battery/

microSD Card: 6 Months) We, PittaSoft Co., Ltd., provide the product warranty according to the Consumer Dispute Settlement Regulations (drawn up by the Fair Trade Commission). PittaSoft or designated partners will provide the warranty service upon request. Circumstances For serious repair required within 10days of purchase For serious repair required within 1month of purchase For serious repair required within 1month of exchange When not exchangeable For performance/

functional problems under normal use conditions Repair

(IfAvailable) Repair

(IfUnavailable) For Defect Repeated problem with the same defect (up to 3times) Repeated trouble with different parts (up to 5times) For the loss of a product while being serviced/repaired When repair is unavailable due to lack of spare parts within the component holding period When repair is unavailable even when spare parts are available 1) Malfunction due to customer fault

- Malfunction & damage caused by user negligence (fall, shock, damage, unreasonable operation, etc.) or careless use

- Malfunction & damage after being serviced/repaired by an unauthorized third party, and not through Pittasofts Authorized Service Center.

- Malfunction & damage due to the use of unauthorized components, consumables, or separately sold parts 2) Other Cases

- Malfunction due to natural disasters (fire, flood, earthquake, etc.)

- Expired life span of a consumable part

- Malfunction due to external reasons This warranty is only valid in the country where you purchased the product. Warranty Within the Term Outside of the Term Exchange/

Refund Exchange Exchange/

Refund Refund Free Repair Exchange/

Refund N/A Paid Repair/

Paid Product Exchange Refund after depreciation plus an additional 10%

(Maximum:

purchase price) Exchange/

Refund after depreciation Paid Repair Paid Repair FCC ID: YCK-CM100GLTE / Contains FCC ID: XMR201605EC25A / Contains IC ID:

10224A-201611EC25A Declaration of Conformity Pittasoft declares that this device complies with the essential requirements and relevant provisions of Directive 2014/53/EU Go to www.blackvue.com/doc to view the Declaration of Conformity. Product Model Name Manufacturer Address

| External Connectivity Module

| CM100GLTE

| Pittasoft Co., Ltd.

| 4F ABN Tower, 331, Pangyo-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, Republic of Korea, 13488 Customer Support Product Warranty

| cs@pittasoft.com

| One-Year Limited Warranty facebook.com/BlackVueOfficial instagram.com/blackvueofficial www.blackvue.com Made in Korea COPYRIGHT2022 Pittasoft Co., Ltd. ALL rights reserved.

Product Label_CM100GLTE [NA]

2021.12.15 Model: CM100GLTE [NA]

FCC ID : YCK-CM100GLTE 2021.12.15 Label Location Bottom view of EUT Model: CM100GLTE [NA]

FCC ID : YCK-CM100GLTE

TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: YCK-CM100GLTE To whom it may concern:

Date: January 21, 2021 We, the undersigned, hereby authorize SGS Korea Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Pittasoft Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Minho Shin Title: Principal Research Engineer Signature:

On behalf of Company: Pittasoft Co., Ltd. Telephone: 82-31-8039-7789

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Pittasoft Co., Ltd. A 4th floor, ABN Tower, 331, Pangyo-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, 13488, South Korea Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name Minho Shin YCK YCK-CM100GLTE shinmh@pittasoft.com 82-31-8039-7789 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a) b) c) d) e) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Date: January 21, 2021 Print Name:

Minho Shin Title:

Principal Research Engineer

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

Date: January 21, 2021 To:

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Pittasoft Co., Ltd. A 4th floor, ABN Tower, 331, Pangyo-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, 13488, South Korea Regarding:

Confidentiality Request regarding application for FCC ID : YCK-CM100GLTE LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. Schematic(s) Block Diagrams Operational Descriptions External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Minho Shin Principal Research Engineer Pittasoft Co., Ltd.