FCC ID: 2AVGW-M3 AirMount MAG

1 x 2 in 1 Magnetic Mount 1 x Suction Cup Car Mount S N FOD FCC Statement This device complies with part 15 and part 18 of the FCC Rules. Operation is Subject To the following two conditions:

(1) This device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the partyresponsible for compliance could void the user's authority tooperate this equipment. Note: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 and part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected. This device complies with Part 18 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Increase the separation between the equipment and any other radio device. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AVGW-M3 Report No.: LCS191209022BE Label and Location AirMount MAG Model No.: M3 FCC ID : 2AVGW-M33 Made In China Size: L: 4.0cm*W: 3.0cm Label Location This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046

<2019-12-28>

TO WHOM IT MAY CONCERN Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID 2AVGW-M3 For the product stated above, we request that the following information be held confidential;

Model name M3 Short-Term Confidentiality Days Long-Term Short-Term Confidentiality Confidentiality Exhibits External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely,

(Signed) Name/Title: Gang Chen / Manager Company: Piware Technology Address: 111 Boyun Rd., 1st Floor, Pu Dong, Shanghai, China Phone: 13817523803 Fax: 0574-83080911 E-Mail: chengang@thepiware.com

Piware Technology 111 Boyun Rd., 1st Floor, Pu Dong, Shanghai, China Labeling Declaration Letter FCC ID: 2AVGW-M3 Model Number: M3 DATE: 2019-12-28 Following the KDB 784748 D01 General labeling and Notification, the information related to Labeling implementation for the AirMount MAG, FCC ID: 2AVGW-M3 Information FCC ID Number 15.19 Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment On Product On Product Packaging In Online User Guide Yes Yes No In Printed User Guide No No No No Yes No No No Yes Product Packaging Label is shown below:

FCC ID: 2AVGW-M3 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, The product is packaged individually. Piware Technology 111 Boyun Rd., 1st Floor, Pu Dong, Shanghai, China Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, Best Regards!

(Signed) Name / Title: Gang Chen / Manager Company: Piware Technology Address: 111 Boyun Rd., 1st Floor, Pu Dong, Shanghai, China Phone: 13817523803 Fax: 0574-83080911 E-Mail: chengang@thepiware.com

Piware Technology 111 Boyun Rd., 1st Floor, Pu Dong, Shanghai, China FCC ID: 2AVGW-M3 Model Number: M3 DATE: 2019-12-28 To:

Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Piware Technology hereby declare that our product (AirMount MAG) Model Number: M3 meet item 5.2 of KDB 680106v02 as follow;

Yes / No Description Yes The device operate in the frequency range 110.0 KHz - 205.0 KHz The maximum output power of the primary coil is 10W. Requirements of KDB 680106 D01 Power transfer frequency is less than 1 MHz Output power from each primary coil is less than 15 watts The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. Client device is placed directly in contact with the transmitter. Mobile exposure conditions only

(portable exposure conditions are not covered by this exclusion). The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Yes Yes Yes Yes Yes The transfer system includes only single coil that is able to detect receiver device. Client device is placed directly in contact with the transmitter. Mobile exposure conditions only The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are less than 50% the MPE limit. Per KDB 680106 section 5 c); in all other cases, unless excluded by 5. b) above, an RF exposure evaluation report must be reviewed and accepted through a KDB inquiry to enable authorization of the equipment. When evaluation is required to show compliance; for example, using field strength, power density, SAR measurements or computational modeling etc., the specific authorization requirements will be determined based on the results of the RF exposure evaluation. Please contact me if you have any question. Piware Technology 111 Boyun Rd., 1st Floor, Pu Dong, Shanghai, China Best Regards!

(Signed) Name / Title: Gang Chen / Manager Company: Piware Technology Address: 111 Boyun Rd., 1st Floor, Pu Dong, Shanghai, China Phone: 13817523803 Fax: 0574-83080911 E-Mail: chengang@thepiware.com